共查询到19条相似文献，搜索用时 562 毫秒
1.
为建立一个简便、多功能的船体曲面修改和生成系统,提出一种船体线型曲面局部修改法,求解船体曲面修改问题。方法采用NURBS曲面技术,对曲面连接满足连续的充分条件推导,保证了局部曲面与外部曲面的光顺连接,控制顶点移动方程组的建立使得新曲面的表达简单直接,最后以某平台供应船船体曲面的修改为算例对方法进行验证,得到一个满足修改要求、光顺平滑的船体新曲面。该方法可应用于数字化造船和改进数学船型方法,也可推广应用于海洋平台等其他领域的曲面拟合、修改和生成。 相似文献
2.
3.
4.
椭圆型缓坡方程的一个有效的有限元解 总被引：7，自引：0，他引：7
将海绵层消波的方法用于有限元方法中,提出了缓坡方程的一种有效的有限元求解方法.在应用有限元法求解椭圆型缓坡方程时,通过在方程中加摩阻项,并在入射边界(波浪由此边界进入计算域)处使用不连续单元,将绕射势从总势中分离出来,在边界上利用海绵层进行消波处理,有效地消除了由于引用放射边界条件引起的误差和数值反射现象. 相似文献
5.
6.
利用有限元方法求解双曲型缓坡方程 总被引：4，自引：1，他引：4
本文提出了一种双曲型缓坡方程的有限元计算方法 ,在建立有限元积分方程时通过在造波线处加入脉动源项来实现内部造波 ,并在开边界处利用阻尼层吸波 ,减少了在边界处由于数值处理引起的误差。数值计算结果与实测值吻合良好。本方法可用于大区域波浪场的计算中 相似文献
7.
海上平台的船舶静力性能的精确计算 总被引：1，自引：0，他引：1
本文提出了用双三次贝齐尔（Ｂｅｚｉｅｒ）曲面拟合水上水下工程结构物，包括海上平台、深潜器和各种类型的船舶。用曲面方程，精确计算船舶的静力性能，然后同传统近似的计算静力性能的数值作一比较，指出精确与近似计算结果的误差范围，供设计人员参考应用。 相似文献
8.
9.
《海洋气象学报》2017,(2)
基于中尺度WRF模式,采用NCEP FNL最终分析资料作为初始场和侧边界条件,以2009年为例,对中国东海区风场进行了动力降尺度研究,旨在检验WRF模式长期积分的动力降尺度能力,并考察动力降尺度方法在东海区的适用情况,为东海区多年时间尺度的风场降尺度研究提供参考。结果表明,3种不同积分方式模拟的风场均能较好地描述东海区风场的季节变化,且整体在冬季的模拟,要优于夏季的模拟。5DAY试验模拟效果最优,其他两组试验稍差。说明每5 d更新一次初始场的积分方式能够最好地描述东海区风场。每10 d更新一次初始场比起1 a连续积分模拟效果并无优势,连续长期积分模拟虽会导致系统误差累积,但定期更新初始场的方法并不一定能有效改善东海区风场的模拟效果。对于加入谱逼近方案的3种积分方式模拟的风场,每10 d更新一次初始场的试验对加入谱逼近方案响应最为明显。但就总体试验效果,5DAYS试验模拟效果仍然是最好的。加入谱逼近方案使得1 a连续积分这种积分方式模拟效果变差。由此说明,加入谱逼近方案后,采用5 d更新一次初始场的方式驱动,每次积分时间较短,初始场的作用还较强,故其改善效果不如10 d更新一次初始场;对于1 a连续积分,谱逼近方案使得初始场的改变导致了连续积分的误差积累增大。 相似文献
10.
边界条件对北太平洋自然^14C分布的影响 总被引：1，自引：0，他引：1
利用一个北太平洋海盆尺度环流模式模拟了北太平洋自然14C的分布和吸收.为了考察开边界与闭边界模式的不同以及不同的开边界条件对模拟结果的影响,相应地做了两个开边界的试验和一个闭边界试验.结果表明,由于自然14C的模拟需要长时间的积分才能达到稳态,因而边界的处理对模拟结果有很大的影响;在闭边界试验中,总体上模拟结果偏大,采用开边界条件打开南边界改变了闭边界中模拟结果偏大的状况.但是,在开边界试验中,边界处观测资料的影响也是显著的.当在边界考虑了出流和入流的不同时,与入流时采用零梯度边界条件的试验相比,入流时边界值给定为观测数据的试验得到了较好的模拟结果,与观测结果更为接近. 相似文献
11.
Adjustments to satellite constrained navigation are required to match SeaBeam bathymetric data at track crossings due to errors in dead reckoning and inaccuracies in satellite fixes. By shifting one of the SeaBeam swaths involved in a track crossing relative to the other and calculating the sum of the squares of the differences in bathymetry within the area of overlapping coverage, we map a two-dimensional error surface whose minimum corresponds to the best estimate of the correction to navigation required at the crossing point. Estimates of the covariance of this correction are derived from the error surface. We employ the curve fitting technique of Tarantola and Valette (1982) to invert for a smooth correction function to a starting model of the position of the ship as a function of time. This technique incorporates formal errors assigned to dead reckoning, satellite fixes, and the shifts required to match bathymetric swaths at crossing points in a simultaneous inversion for the correction function for all tracks within the study area.In a test of the method in a study area on the southern Mid-Atlantic Ridge, a data set involving two cruises, 30 days of SeaBeam data, and 753 track crossings, we found that crossing SeaBeam swaths can potentially resolve the relative position of the ship on the two tracks to within 30 to 70 m. The inversion procedure yielded a much better constrained navigation function and much improved match of bathymetry. The final model of the navigation fit crossing shifts about as well as satellite data (with respect to their assigned data errors) with the RMS value of the crossing shifts decreasing from 1200 m in the original satellite-constrained navigation to 200 m in the final solution. However, the potential resolution of position using SeaBeam swaths was not fully achieved in the solution because there are systematic bathymetric artifacts in SeaBeam data, multiple local minima in the error surfaces in highly lineated topography, inadequate dead reckoning data, occasional bad satellite fixes, and limitations on the short period corrections allowed in the model. 相似文献
12.
13.
The generation and propagation of surface waves resulting from suddenly created disturbances over water surfaces is investigated. The initial boundary conditions defining the disturbance are given either by a velocity of the free surface, an initial elevation of the free surface or a pressure impulsively applied on the free surface. It is shown that the corresponding three forms of solutions are related by a simple time derivative. Linear solutions are obtained in the cases where the wave motion is assumed to be nondispersive, mildly dispersive and fully dispersive, as well as in the case where the motion is given by the method of stationary phase. Criteria are established to indicate the limit of validity of each method. 相似文献
14.
人工浮鱼礁型式多样，适应水深范围广，优化锚泊方式可规模化建设浮鱼礁群，是海洋中上层生境构建的重要手段。中上层浮鱼礁投放于近海，属于海岸工程范畴，抗浪性能是其结构设计的关键。根据有限单元法和集中质量点法，详细阐述和推导了中上层浮鱼礁各构成组件连接位置处点或单元的相互耦合受力和运动处理方法，以及浮鱼礁出水条件的判别方法和水质点速度、加速度的修正方法。建立的波浪作用下三维浮鱼礁动力响应数值模型与其在波浪水槽中的物理模型试验对比，验证了数值模型的正确性。最后建立了一种新型锚泊方式的浮鱼礁动力响应数值模型，分析了浮鱼礁摆动角度、锚绳拉力、网衣系缚点总拉力的历时变化。研究结果可为中上层浮鱼礁优化结构形状和搭配浮体、配重提供判断依据。 相似文献
15.
HAN Lei 《海洋学报(英文版)》2014,33(7):12-20
A time splitting technique is common to many free surface ocean models. The different truncation errors in the equations of the internal and external modes require a numerical adjustment to make sure that algorithms correctly satisfy continuity equations and conserve tracers quantities. The princeton ocean model （POM） has applied a simple method of adjusting the vertical mean of internal velocities to external velocities at each internal time step. However, due to the Asselin time filter method adopted to prevent the numerical instability, the method of velocity adjustment used in POM can no longer guarantee the satisfaction of the continuity equation in the internal mode, though a special treatment is used to relate the surface elevation of the internal mode with that of the external mode. The error is proved to be a second-order term of the coefficient in the Asselin filter. One influence of this error in the numerical model is the failure of the kinetic boundary condition at the sea floor. By a regional experiment and a quasi-global experiment, the magni- tudes of this error are evaluated, and several sensitivity tests of this error are performed. The characteristic of this error is analyzed and two alternative algorithms are suggested to reduce the error. 相似文献
16.
海洋一号C/D（HY-1C/D）卫星中国海洋水色水温扫描仪（Chinese Ocean Color and Temperature Scanner,COCTS）主要用于探测海洋水色、水温等要素,这些要素需要经过卫星资料处理才能获取,而几何定位是预处理的核心,直接影响这些要素的质量。COCTS具有114°视场角和四元逐点摆扫的特征,据此研究出一套完整的几何定位方法。从0级数据中提取卫星星历,利用插值法从中获取采样时间对应的卫星位置和速度,进而得到轨道（ORB）坐标系到地心旋转（ECR）坐标系的转换矩阵。基于四元逐点摆扫的特征,中心视矢量分别绕X轴、Y轴旋转相应角度,获得扫描行各采样点ORB视矢量,建立视矢量与地球交叉点关系模型,从而对根据波段数据绘制的遥感图像进行地理定位。本文使用插值法替代了传统需要6个轨道根数来计算卫星位置的复杂方法,同时直接计算ORB到ECR的转换矩阵,而不采用传统的两步转换方法。经过多组数据计算及定性定量验证,HY-1C/D COCTS几何定位结果一致;采样像元尺度效应导致从星下点到两侧边缘、从赤道到两极,误差逐渐增大,约在两个像元内。该方法满足一定的定位精度要求,可以用于COCTS的几何定位。 相似文献
17.
As a new remote sensing technology, the global navigation satellite system (GNSS) reflection signals can be used to collect the information of ocean surface wind, surface roughness and sea surface height. Ocean altimetry based on GNSS reflection technique is of low cost and it is easy to obtain large amounts of data thanks to the global navigation satellite constellation. We can estimate the sea surface height as well as the position of the specular reflection point. This paper focuses on the study of the algorithm to determine the specular reflection point and altimetry equations to estimate the sea surface height over the reflection region. We derive the error equation of sea surface height based on the error propagation theory. Effects of the Doppler shift and the size of the glistening zone on the altimetry are discussed and analyzed at the same time. Finally, we calculate the sea surface height based on the simulated GNSS data within the whole day and verify the sea surface height errors according to the satellite elevation angles. The results show that the sea surface height can reach the precision of 6 cm for elevation angles of 55° to 90°, and the theoretical error and the calculated error are in good agreement. 相似文献
18.
19.
利用海岸线的海洋遥感图像控制点(GCP)自动匹配法 总被引：5，自引：2，他引：3
研究一种利用海岸线自动确定海上地面控制点(GCP)的方法.借助边缘检测技术提取海岸线,将海岸线的点全部作为控制点的备选集合,利用相关松弛法寻找同名点,建立一种可靠判别机制来保证海岸线上GCP的正确性,通过平均法和插值法求取海上GCP的值.利用本方法可以方便地得到分布密集的GCP值,其中海上GCP值具有子像元精度.同时研究了一种新的几何变换方法,即用插值法直接求取需校正图像的几何变换坐标,随着插值密度的增加,求得海上GCP值的点就越多,最后使所有点的坐标值通过插值方法计算得到,代替二元n次方程组进行空间坐标变换,使遥感图像的几何配准误差在某种程度上达到0,利用该方法对海洋遥感资料进行几何配准,可以提高配准的精度和节省机时,为遥感资料的动态监测和数据库建设创造了有利条件. 相似文献