共查询到20条相似文献，搜索用时 171 毫秒
1.
2.
自渤海湾分离到一株对海水有高絮凝活性的菌株,鉴定并命名为黑曲霉ETYB-13。该菌株发酵上清液经乙醇沉淀与冷冻真空干燥,获得微生物絮凝剂ETYBF。该菌株的絮凝活性曲线证实,在培养48~72 h之间,是收集絮凝剂的最佳时间。化学定性实验显示,ETYBF的主要成分为多糖。紫外光谱与红外光谱也确定ETYBF主要成分为多糖。凝胶渗透色谱(GPC)证实,ETYBF是一种混合物,且分子量在105Da以上。稳定性实验证实,ETYBF的活性不受环境温度与pH变化的影响。 相似文献
3.
4.
以自制的两性聚丙烯酰胺分散体系作为污水絮凝剂,考查对城市污水的处理能力。以絮体体积和上清液的透光率为考查参数,研究了聚合物用量、聚合物的离子度、体系pH值和样品溶解时的盐浓度对絮凝效果的影响,并与离子型絮凝剂进行了比较。研究发现,两性聚丙烯酰胺的絮凝能力比阴离子型聚合物的絮凝能力强,比阳离子型聚合物的絮凝能力略强,最佳使用量为3.0 mg.L-1。两性聚丙烯酰胺的絮凝能力受离子度的影响,离子基团越多,絮凝能力越强,但过多的离子基团可带来负面影响。两性聚丙烯酰胺对体系的pH值的适应范围较宽。两性聚丙烯酰胺在应用时需先用1%的氯化钠溶液溶解,盐浓度过低时聚合物不能充分溶解,高于此值对絮凝过程无明显影响。 相似文献
5.
6.
以自制的两性聚丙烯酰胺分散体系作为污水絮凝剂,考查对城市污水的处理能力.以絮体体积和上清液的透光率为考查参数,研究了聚合物用量、聚合物的离子度、体系pH值和样品溶解时的盐浓度对絮凝效果的影响,并与离子型絮凝剂进行了比较.研究发现,两性聚丙烯酰胺的絮凝能力比阴离子型聚合物的絮凝能力强,比阳离子型聚合物的絮凝能力略强,最佳使用量为3.0 mg·L-1.两性聚丙烯酰胺的絮凝能力受离子度的影响,离子基团越多,絮凝能力越强,但过多的离子基团可带来负面影响.两性聚丙烯酰胺对体系的pH值的适应范围较宽.两性聚丙烯酰胺在应用时需先用1%的氯化钠溶液溶解,盐浓度过低时聚合物不能充分溶解,高于此值对絮凝过程无明显影响. 相似文献
7.
通过实验研究和理论分析 ,以流动高浊度原水为研究对象 ,考察了在不同絮凝剂搅拌速度、投药量和投药方式条件下 R值的变化规律 ,从而得到絮凝体破碎和重组的有关信息 ,及时反映各种变化条件下的絮凝体特性。 相似文献
8.
甲壳胺对褐藻胶胶液的絮凝作用及其在漂浮工艺中的应用研究 总被引：1，自引：0，他引：1
研究了甲壳胺作为絮凝剂对褐藻胶胶液的絮凝作用及漂浮效果。结果表明,甲壳胺对褐藻胶胶液具有较强的絮凝作用,其中,１０ｐｐｍ甲壳胺用量的漂浮效果较好,可大大缩短漂浮时间,对清胶液的透光率,粘度和胶收率均有不同程度的提高。 相似文献
9.
改性粘土法是一种高效、环保的有害藻华应急处置技术,可通过絮凝作用有效去除水体中藻华生物。但利用改性粘土絮凝产毒藻后,水体中胞内外藻毒素的变化情况目前尚不清楚。文章考察了I型改性粘土(MCI)絮凝典型产毒甲藻——太平洋亚历山大藻(Alexandriumpacificum)后,水体中残留藻细胞内和胞外麻痹性贝类毒素(paralytic shellfish toxins, PSTs)含量、组分的变化情况。实验结果表明, MC I对密度为6.11×10~3 cells/mL的A. pacificum 3小时去除率达62%,水体中残留藻细胞单细胞毒素含量和PSTs组分与对照组无显著差异,但水体中总PSTs含量大大降低,其中由絮凝沉降导致的胞内PSTs被去除量占水体中PSTs总减少量的90%以上。另外,针对MC I对胞外PSTs吸附效果的研究发现,低于0.5 g/L的MC I对胞外PSTs无明显吸附效果,而在利用0.2 g/L MC I絮凝去除大部分亚历山大藻后,水体中胞外PSTs含量无明显变化。由此可以推测该用量下的MC I未造成大量藻细胞破裂向水体中释放毒素。该研究结果将为改性粘土治理有毒甲藻藻华的现场应用提供科学依据。 相似文献
10.
在充分认识传统沉降筒缺陷的基础上提出了"大型可温控自动搅拌沉降试验筒"。通过室内系列试验发现:(1)含沙量对长江口细颗粒沉降速度影响最大;(2)温度上升,沉速增加,但不同阶段影响程度有所不同;(3)含沙量越高,盐度对沉速的影响越小,含沙量相同情况下,长江口北槽悬沙枯季水温下盐度对沉速的影响在1.8~5.7倍左右;洪季水温下盐度对沉速的影响在1.5~2.2倍左右。(4)枯季最佳絮凝盐度在7左右,最佳絮凝含沙量为7 kg/m3;洪季最佳絮凝盐度在10~12左右,最佳絮凝含沙量为4.5kg/m3。本研究成果可望加深我们对细颗粒泥沙动力过程相关机理的认识,同时可为相关港口、航道的淤积机理分析,数学模型、物理模型研究工作提供一定技术参考。 相似文献
11.
Shigehisa Nakamura 《Journal of Oceanography》1977,33(1):47-53
By a model bay with a mouth and a narrow, an experiment on long period waves is carried out to discuss the behavior of the tsunamis and storm surges. Emphasis is placed on the analysis of the characteristics of the current velocities associated with the long period waves incoming through the mouth in terms of Ursell's parameter. 相似文献
12.
E. A. Ryzhov Yu. G. Izrailsky K. V. Koshel 《Izvestiya Atmospheric and Oceanic Physics》2014,50(4):420-425
The motion of a point vortex along a rectilinear boundary with a circle cavity, which models the coastline of a bay, and associated fluid particle advection are studied within a model of barotropic inviscid fluid. Using an analytical expression for the complex potential through which the velocity field is determined, we show that fluid particles start moving irregularly when the vortex is passing the cavity due to the nonstationarity of the velocity field generated by the vortex. Some of the fluid particles which were initially inside the vortex atmosphere leave it due to the irregularity and remain within the cavity vicinity. Depending on the initial position of the vortex and a parameter that determines the cavity size, the fraction of these fluid particles can differ significantly from fluid particles initially uniformly distributed within the vortex atmosphere. The escape of fluid particles from the vortex atmosphere is shown to be most efficient in the case of a relatively closed cavity under the condition that the initial vortex atmosphere area should be significantly smaller than the cavity area. 相似文献
13.
With an additional vertical duct at the wave-beaten side, an OWC is expected to give some much better performances. This is, essentially, due to two reasons. First, an OWC with the additional vertical duct (U-OWC) has an eigenperiod greater than the eigenperiod of a conventional OWC. Second, the amplitude of the pressure fluctuations on the opening of a U-OWC is greater than the amplitude of the pressure fluctuations on the opening of a conventional OWC (the greater the smaller the wave period is). For the first reason, a U-OWC can give performances better than those of a conventional OWC both with swells and large wind waves. For the second reason, a U-OWC can give performances better than those of a conventional OWC also with small wind waves. 相似文献
14.
A two-dimensional analytical solution is presented to study the reflection and transmission of linear water waves propagating past a submerged horizontal plate and through a vertical porous wall. The velocity potential in each fluid domain is formulated using three sets of orthogonal eigenfunctions and the unknown coefficients are determined from the matching conditions. Wave elevations and hydrodynamic forces acting on the porous wall are computed. Reflection and transmission coefficients are presented to examine the performance of the breakwater system. The present analytical solutions are found in fairly good agreement with the available laboratory data. The results indicate that the plate length, the porous-effect, the gap between plate and porous wall, and the submerged depth of the plate all show a significant influence on the reflected and transmitted wave fields. It is also interesting to note that the submerged plate plays an important role in reducing the transmitted wave height, especially for long incident waves. 相似文献
15.
Using a vertically two-dimensional, two-layer model, we have analytically examined the generation mechanism of a nonzero Eulerian
residual flow by strong tide-topography interaction in a narrow channel where the frictional effect is not included. In this
case, tidally generated baroclinic disturbances are forced non-uniformly in space and time while being advected by a strong tidal flow over the non-uniform slope of the bottom topography. Consequently, nonzero Eulerian residual flow results when averaged over one tidal period.
Although the time average of the velocity field is thus nonzero, the associated Eulerian residual transport in each layer
is compensated by a Stokes transport so that no Lagrangian residual transport results in both layers. This warns us that simple
time averaging of the velocity data obtained at a fixed mooring station might lead to a spurious material transport.
This revised version was published online in August 2006 with corrections to the Cover Date. 相似文献
16.
This paper is concerned with the vibrations of a thin plate resting on a fluid-layer subjected to a moving point force. The frequency is assumed to be low and the fluid is deep. Both the fluid and the point force are always in contact with the plate. Hankel Transform and complex integration techniques are used to calculate the lateral displacements withrespect to a moving coordinate system and a coordinate transformation is used to achieve the results with respect to a fixed point. Numerical results are discussed with respect to the velocity of the moving force, its direction of movement and the fluid depth. 相似文献
17.
数据稀缺生态系统中多种类质量谱模型的构建 总被引：1，自引：0，他引：1
多种类生态模型已经被广泛应用于渔业活动影响应预测和管理措施效果评估。质量谱模型是一种基于生理过程构建的生态模型,该模型为描述鱼类群落在个体摄食变异和随个体发生的生态位迁移提供了一个可行的方法。尽管生态模型在增进生态系统认识上具有重要意义,其应用在数据稀缺的渔业中受到很大限制。作为实践基于生态系统渔业管理(EBFM)的第一步,本研究构建了海州湾鱼类群落的质量谱模型。本研究详述了数据收集和模型参数化的过程,以促进该模型在数据稀缺的生态系统中未来的应用。作为一个范例,研究展示了不同捕捞努力量对生态系统的影响,并采用一套生态指标监测其动态。群落生物量、多样性指数、W指数,大鱼指数(LFI),平均体重和群落质量谱斜率对捕捞压力的响应呈非线性,最大的捕捞强度并非总是对鱼类群落产生最强的影响。本文强调了构建谱模型在生态研究中的的价值和可行性,并讨论了模型的局限性和改进的可能。本研究旨在促进质量谱模型的广泛应用以更好地支持基于生态系统的渔业管理。 相似文献
18.
曹天德 《海洋学报(英文版)》2010,29(11)
This paper deduces that the particular electronic structure of cuprate superconductors confines Cooper pairs to be first formed in the antinodal region which is far from the Fermi surface, and these pairs are incoherent and result in the pseudogap state. With the change of doping or temperature, some pairs are formed in the nodal region which locates the Fermi surface, and these pairs are coherent and lead to superconductivity. Thus the coexistence of the pseudogap and the superconducting gap is explained when the two kinds of gaps are not all on the Fermi surface. It also shows that the symmetry of the pseudogap and the superconducting gap are determined by the electronic structure, and non-s wave symmetry gap favours the high-temperature superconductivity. Why the high-temperature superconductivity occurs in the metal region near the Mott metal-insulator transition is also explained. 相似文献
19.
Necati Mahir 《Ocean Engineering》2009,36(5):357-367
In this study, two- and three-dimensional numerical simulations were performed to investigate the effect of the flow structure in the wake of a square cylinder placed near a plane wall by applying a fully implicit finite-difference method to the Navier-Stokes equations. The gap ratio between the cylinder and the wall, G/D, was varied from 0.2 to 4 for the Reynolds numbers of 175, 185 and 250. The role of the 3D structure on the lift and drag coefficients and Strouhal number was investigated. The results were compared with those of the 2D numerical simulations. The deviations of the 3D flow structure of the cylinder-wall pair from that of a single cylinder were also reported. At Re=250, B type secondary vortices were determined in the wake region. At Re=175 and 185, transition from A type vortex to fully periodic B type vortices was observed when the cylinder was brought closer to the wall. 相似文献
20.
A jet-controlled high-lift hydrofoil with a flap is investigated using both experimental and computational methods. Experiments were carried out in a cavitation tunnel to measure forces and moment acting on the hydrofoil, and surface pressure distribution. The measured data show the feasibility of such a device for marine applications. Computational studies have also been carried out in parallel with the measurements. The computational results are analyzed in terms of global and local quantities using available experimental data. The present computational results compare well with the well-known experimental data for circulation control flows. The results for flow around a hydrofoil with a blown flap further validate the concept behind the proposed device. The results of the study demonstrate the applicability of the technology to the design of practical control surfaces. 相似文献