共查询到18条相似文献，搜索用时 468 毫秒
1.
细粒酒精模型冰物理力学性质评价的新指标 总被引：1，自引：0，他引：1
依据酒精细粒模型冰制冰过程中的物理本质和控制细粒酒精模型冰物理力学性质的物理本质,建立了一项适合于喷雾技术细粒模型冰性质评价综合指标.阐明了这一评价指标的物理意义,并给出这一指标与细粒酒精模型冰物理力学性质参数的关系. 相似文献
2.
细粒酒精模型冰的弯曲强度试验研究 总被引：3，自引：0，他引：3
基于不同制冰条件和工的细粒酒精模型冰层原位悬臂弯曲强度试验,给出细料酒精模型冰弯曲强度;分析了考虑和不考虑不浮力效应对弯曲强度的差异;利用向睡向下弯曲强度结果给出该模型冰各向同性的证据;得到该冰弯曲强度与其密度、冰内未冻液含量和制冷过程可控制因子的关系,并作为定量控制模型冰质量的基础。 相似文献
3.
浮冰界面融化速率参数化方案的实验室研究 总被引：2，自引：2，他引：0
融冰季节时天然浮冰表面、底面和侧向融化共存,三者融化速率是底面大于侧向,侧向大于表面。而且浮冰尺寸越小,侧向速率占比越高。为了解决将小尺度浮冰块尺度指标计入融化参数化方案,在低温环境实验室无辐射、无流速、控制气温和水温条件下对天然海冰和人工冻结淡水冰的圆盘试样,开展了不同初始水温和不同初始直径的圆盘试样融化过程实验,获得了圆盘试样直径、厚度和质量融化过程。依据这些实验数据,构建试样直径厚度比这一新指标,通过物理分析和数学统计手段,建立了海冰和淡水冰试样表面、底面融化速率同温度梯度,侧向融化速率和温差以及直径厚度比的关系式。这些关系式能够应用于天然直径100 m范围内浮冰的融化参数化方案,期望能解决北冰洋海冰和入海口近岸淡水冰夏季融化季节能量和质量平衡数值模拟的需求。 相似文献
4.
位于寒冷海域的海工结构物,冰载荷往往是控制载荷之一。合理地选取结构物工作海域的环境条件和冰的物理力学特性,直接关系到结构物的设计、使用和安全。本文分析讨论了在设计寒冷海域结构物时,考虑冰载荷的影响、海冰物理力学特性对冰载荷的影响以及计算冰载荷的公式选用和有关参数的选取。对可能作用在结构物上的各种冰载荷的计算进行了分析,提出计算这些冰载荷的一些看法和建议。 相似文献
5.
2006年冬末春初,在德国POLARSTERN科学考察船执行南极威德尔海西北海域考察期间,调查了考察区海冰物理和海洋生物。本文观测了航线上钻取的27支海冰冰芯的组构和71个冰晶体薄片;分析得到393组冰温数据;348组盐度、密度数据和311组叶绿素a和脱镁叶绿素含量数据;通过302组冰内相同深度孔隙率和叶绿素a含量数据分析,发现海冰物理参数影响冰内叶绿素a含量的新证据;利用收集的雪、冰厚度数据以及环境容量制约生态平衡的规律,建立了雪、冰厚度对冰底叶绿素繁荣的影响以及;确立了南极粒状冰和柱状冰内叶绿素a上限含量同卤水体积的关系。从而表达了冰晶体对卤水排泄的效应和冰物理性质对南极春季冰底和冰-水界面叶绿素a增长的贡献。此外,还得出海冰物理性质影响冰藻,并且是南极冰区水体浮游植物繁荣的关键控制因素。 相似文献
6.
一种冰-海洋模式的热力耦合方案 总被引：4，自引：1，他引：3
冰与海洋的热力耦合对冰与海洋环流的模拟有极其重要的影响,是冰-海洋相互作用的一个重要方面.对其精确确定需要详细考虑冰-海洋界面附近的湍流过程,这在长时期的模拟特别是气候模拟中,常受到技术条件的限制.过去的研究常常假设冰下海洋混合层的温度为冰点,特别是在单纯冰模式的模拟中,但考虑海冰漂移和冰点变化的效应时,这一假设是不精确的.因此,弱化冰下海洋混合层温度为冰点的约束,不考虑详细的冰-海洋界面和海洋混合层的湍流过程,根据冰-海洋耦合系统的能量收支关系,设计了一个简化的冰-海洋热力耦合方案.对该方案引起的海洋混合层适应、热力结构和海冰发展的影响进行了分析,并将其用于全球冰海洋耦合模式的数值试验,结果表明,在大气热力强迫下该耦合方案既可使冰区混合层海水温度向冰点适应,又使冰边缘带海水温度与冰点保持明显差异,能够较好地反映冰-海洋热力相互作用.利用该耦合方案构造的全球冰-海洋耦合模式模拟的海冰范围及季节变化与实际观测非常接近. 相似文献
7.
8.
9.
海冰单轴压缩强度是寒区海洋工程中的一个重要设计参数,也是影响海冰动力学行为的主要因素。在2008-2012年间的三个冬季,对渤海沿岸的海冰单轴压缩强度进行了现场与室内试验,由此分析了其在温度、卤水体积和应力率下的基本特征。测试结果表明,海冰单轴压缩强度与其温度呈幂函数关系,与卤水体积平方根呈指数关系,与应力率呈线性关系。此外还分别在不同温度与卤水体积下确定了海冰单轴压缩强度上包络限的变化规律。最后,综合考虑卤水体积和应力率的影响,对海冰单轴压缩强度分布特征进行了分析。以上研究有助于揭示渤海海冰基本力学性质,为冰区结构设计和海冰动力学分析提供参考依据。 相似文献
10.
11.
冰脊对极地船舶及海洋工程结构的冰载荷设计及冰区安全运行具有重要的影响,其几何形态是重要的考虑因素。为研究冰脊的几何形态,本文基于Voronoi切割算法构造扩展多面体海冰单元,并使其相互冻结形成平整冰;采用离散单元法模拟海冰在相对运动时挤压形成冰脊的动力过程,统计分析脊帆高度、龙骨宽度、龙骨深度、龙骨水平倾角等主要几何参数,并确定这些几何参数间的对应关系。将离散元模拟结果同冰脊现场观测资料对比分析以验证扩展多面体离散元方法模拟冰脊形成过程的可行性。在此基础上讨论冰厚、冰速、海冰强度等因素对冰脊形态的影响。本文采用离散元方法对冰脊形成过程及几何特性的数值分析可为深入开展冰脊的形成机理及其对船舶、海洋工程结构物的冰载荷分析提供参考依据。 相似文献
12.
海冰的热力过程及其与动力过程的耦合模拟 总被引：17，自引：0，他引：17
研究和讨论了海气相互作用过程中海冰演变的物理过程；大气和海洋对海冰的热力作用以及冰内物理过程；大气和海洋热力学参数对冰厚和密集度等冰情参数的影响和上述物理过程的数学处理。计算了冰面与水面能量收支，并分析海冰热力增长函数的特征；将热力模式与动力模式。对渤海１９８９－１９９０年度海冰进行数值模拟。结果表明，考虑热力过程的热动力模式，对类似于１９９０年２月１２－１８日海冰融化过程显示出明显的优越性，模拟 相似文献
13.
Modified PIC Method for Sea Ice Dynamics 总被引：1，自引：0，他引：1
The sea ice cover displays various dynamical characteristics such as breakup, rafting, and ridging under external forces. To model the ice dynamic process accurately, the effective numerical modeling method should be established. In this paper, a modified particle-in-cell （PIC） method for sea ice dynamics is developed coupling the finite difference （FD） method and smoothed particle hydrodynamics （SPH）. In this method, the ice cover is first discretized into a series of lagrangian ice particles which have their own sizes, thicknesses, concentrations and velocities. The ice thickness and concentration at Eulerian grid positions are obtained by interpolation with the Gaussian function from their surrounding ice particles. The momentum of ice cover is solved with FD approach to obtain the Eulerian cell velocity, which is used to estimate the ice particle velocity with the Gaussian function also. The thickness and concentration of ice particles are adjnsted with particle mass density and smooth length, which are adjusted with the redistribution of ice particles. With the above modified PIC method, numerical simulations for ice motion in an idealized rectangular basin and the ice dynamics in the Bohai Sea are carried out. These simulations show that this modified PIC method is applicable to sea ice dynamics simulation. 相似文献
14.
Arctic sea ice area and thickness have declined dramatically during the recent decades. Sea ice physical and mechanical properties become increasingly important. Traditional methods of studying ice mechanical parameters such as ice-coring cannot realize field test and long-term observation. A new principle of measuring mechanical properties of ice using ultrasonic was studied and an ultrasonic system was proposed to achieve automatic observation of ice mechanical parameters (Young’s modulus, shear modulus and bulk modulus). The ultrasonic system can measure the ultrasonic velocity through ice at different temperature, salinity and density of ice. When ambient temperature decreased from 0°C to ?30°C, ultrasonic velocity and mechanical properties of ice increased, and vice versa. The shear modulus of the freshwater ice and sea ice varied from 2.098 GPa to 2.48 GPa and 2.927 GPa to 4.374 GPa, respectively. The bulk modulus of freshwater ice remained between 3.074 GPa and 4.566 GPa and the sea ice bulk modulus varied from 1.211 GPa to 3.089 GPa. The freshwater ice Young’s modulus kept between 5.156 GPa and 6.264 GPa and sea ice Young’s modulus varied from 3.793 GPa to 7.492 GPa. The results of ultrasonic measurement are consistent with previous studies and there is a consistent trend of mechanical modulus of ice between the process of ice temperature rising and falling. Finally, this ultrasonic method and the ultrasonic system will help to achieve the long-term observation of ice mechanical properties of ice and improve accuracy of sea ice models. 相似文献
15.
《Ocean Modelling》2010,35(3-4):137-149
Passive microwave satellite observations of ice extent and concentration form the foundation of sea ice model evaluations, due to their wide spatial coverage and decades-long availability. Observations related to other model quantities are somewhat more limited but increasing as interest in high-latitude processes intensifies. Sea ice thickness, long judged a critical quantity in the physical system, is now being scrutinized more closely in sea ice model simulations as more expansive measurements become available. While albedo is often the first parameter chosen by modelers to adjust simulated ice thickness, this paper explores a set of less prominent parameters to which thickness is also quite sensitive. These include parameters associated with sea ice conductivity, mechanical redistribution, oceanic heat flux, and ice–ocean dynamic stress, in addition to shortwave radiation. Multiple combinations of parameter values can produce the same mean ice thickness using the Los Alamos Sea Ice Model, CICE. One of these “tuned” simulations is compared with a variety of observational data sets in both hemispheres. While deformed ice area compares well with the limited observations available for ridged ice, thickness measurements differ such that the model cannot agree with all of them simultaneously. Albedo and ice–ocean dynamic parameters that affect the turning of the ice relative to the ocean currents have the largest effect on ice thickness, of the parameters tested here. That is, sea ice thickness is highly sensitive to changes in external forcing by the atmosphere or ocean, and therefore serves as a sensitive diagnostic for high-latitude change. 相似文献
16.
17.
基于Icepack一维海冰柱模式,以2014年中国第6次北极科学考察长期冰站ICE06的3个融池的辐射参量和气象参量的连续观测作为大气强迫数据,对融池反照率及相关参量进行了模拟。本文引入观测的融池深度及海冰厚度作为初始条件,通过考虑融池覆盖率的作用,改进了平整冰融池参数化方案中海冰干舷的计算,修正了冰上可允许的最大融池深度,成功实现了对融池参数变化的模拟;同时,还修正了入射辐射分量比例系数与对应反照率分量权重系数不一致的问题。标准试验中,模拟的3个融池的反照率与观测结果之间的平均误差分别为0.01、0.05和0.13;入射辐射比例的敏感性试验结果表明,当可见光辐射比例增大8%时,融池反照率的模拟结果增大了6%～8%;融池表面再冻结试验的结果显示,当再冻结冰层厚度小于2 cm时,模拟冰面反照率的增加不足0.006,由此引起的表面能量收支减少了约1.1 W/m2。本文研究指出,准确的入射辐射比例对于改善北极海冰反照率模拟是必要的;并指出目前模式仍存在融池表面再冻结参数化、热收支计算、表面吹雪效应等有待解决的问题。 相似文献
18.
Based on classification tests, oedometer tests, fall-cone tests and triaxial tests, physical and mechanical properties of sediments in the Storegga Slide region were analysed to assess parameter interrelationships. The data show good relationships between a number of physical and mechanical parameters. Goodness of fit between compression index and various physical parameters can be improved by multiple regression analysis. The interclay void ratio and liquidity index correlate well with the undrained shear strength of clay. Sediments with higher water content, liquid limit, activity, interclay void ratio, plasticity index and liquidity index showed higher compression index and/or lower undrained shear strength. Some relationships between parameters were tested by using data from two other sites south of the Storegga Slide. A better understanding of properties of sediments in regions such as that of the Storegga Slide can be obtained through this approach. 相似文献