共查询到20条相似文献，搜索用时 31 毫秒
1.
Analysis of body supercavitation in shallow water 总被引：1，自引：0，他引：1
Motion of a cavitating body in shallow waters undergoes a blockage effect. There are influences of the rigid boundary (the sea bottom) and the free boundary (sea surface) in shallow waters. As shown by computation carried out with the ideal fluid theory, the combination of these influences leads to an increase of cavitation number for a cavity of a fixed length and to 3D deformations of the cavity cross-sections, with a swelling of the down cavity part. 相似文献
2.
Bottom ventilated cavitation has been proven as a very effective drag reduction technology for river ships and planning boats. The ability of this technology to withstand the sea wave impact usual for seagoing ships depends on the ship bottom shape and could be enhanced by some active flow control devices. Therefore, there is the need in numerical tools to estimate the effects of bottom changes and to design such devices. The fundamentals of active flow control for the ship bottom ventilated cavitation are considered here on the basis of a special model of cavitating flows. This model takes into account the air compressibility in the cavity, as well as the multi-frequency nature of the incoming flow in wavy seas and of the cavity response on perturbations by incoming flow. The numerical method corresponding to this model was developed and widely manifested with an example of a ship model tested in a towing tank at Froude numbers between 0.4 and 0.7.The impact of waves in head seas and following seas on cavities has been studied in the range of wavelengths from 0.45 to 1.2 of the model (or ship) length. An oscillating cavitator-spoiler was considered as the flow controlling devices in this study. The oscillation magnitude and the phase shift between cavitator oscillation and the incoming waves have been varied to determine the best flow control parameters. The main results of the provided computational analysis include oscillations of cavity surface, of the pressure in cavity and of the moment of hydrodynamic load on the cavitator. The major part of computations has been carried out for the flap oscillating at the frequency coinciding with the wave frequency, but the effect of a frequency shift is also analyzed. 相似文献
3.
基于PETSc FEM开源代码,采用分步有限元算法和区域分解法,并行计算了不同雷诺数下的三维顶板斜向驱动方腔流问题。计算结果表明,当顶板沿其对角线方向运动时,流体与下游侧壁发生斜向碰撞后在下游对角处汇聚并形成射流,该射流在与底面、上游侧壁碰撞后形成较为复杂的涡流结构。雷诺数大小对三维顶板斜向驱动方腔流的涡流场结构形态具有重要影响。并行性能分析表明区域分解法能有效地提高三维粘性方腔流的计算速度。 相似文献
4.
Significant drag reduction of large displacement vessels can be achieved by applying multi-wave air cavities arranged on the hull bottom. Waves generated on the air–water interface of air cavities impose requirements on the dimensions of a hull recess that accommodates the air cavity. An approximate model for calculating wave patterns in the critical upstream part of long air cavities in a simplified, horizontal-plane geometry is presented in this paper. The influence of the recess planform boundaries and other factors on the wave patterns is studied parametrically. Some hydrodynamic aspects of multi-wave air cavities are discussed. 相似文献
5.
Abstract In this article three main stages of tsunami wave evolution are investigated. At first, the development of disturbances from a given patched elevation of the bottom surface in an incompressible nonviscous fluid of the uniform depth is considered. Then, a tsunami wave diffraction by underwater bottom elevation or cavity is investigated. In this case the shallow water equations are already used, and it is supposed that a cylindrical wave is spread from patched water elevation over the epicentrum. Last, the tsunami propagation and transformation in a shallow water region and its run‐up on a beach are investigated on the basis of the improved shallow water theory, taking into consideration the nonlinear and dispersive terms of higher order. The proposed theory is tested in a problem of collisions of two solutions. Solutions of the first and the second problems are obtained by the method of integral Laplace's transformation with following numerical inversion of transformations. A finite difference method for a solution of the last problem is used. 相似文献
6.
The successful designs of hulls for ships employing drag reduction by air bottom cavitation have been based on solutions of inverse problems of the theory of ideal incompressible fluid. However, prediction of the drag reduction ratio, the air demand by ventilated cavities and the cavity impact on the hull–propeller interaction is impossible in the framework of this theory because all mentioned characteristics depend on interaction of air cavities with the ship boundary layers. Because the known CFD tools are not fitted to ventilated cavitation at low Froude numbers, an analysis of this interaction requires a novel flow model. This model includes the incompressible air flow in the ventilated cavity, the compressible flow of a water–air mixture in the boundary layer on cavities and downstream of them and the curl-free incompressible outer water flow. The provided 2D computations employing this model allows for explanations of the earlier observed effects and for prediction of the air demand by ventilated cavities. The computed velocity profiles downstream of cavities are in the accordance with the available experimental data. 相似文献
7.
Divisional morphogenesis in the marine ciliate Anteholosticha manca (Kahl, 1932) Berger, 2003 (Ciliophora: Urostylida) 总被引：1，自引：1，他引：0
LI Liqiong HU Xiaozhong WARREN Alan AL-RASHEID Khaled A S AL-FARRAJ Saleh A SHAO Chen SONG Weibo 《海洋学报(英文版)》2008,27(2):157-163
The cortical development and macronuclear evolution of the marine hypotrichous ciliate Anteholosticha manca, collected from the coastal waters near Qingdao, China, were investigated using the protargol impregnation method. The morphogenesis of A. manca is generally typical for the genus, and can be characterized as the following features ： （ 1 ） in the proter, a new oral primordium is formed on the bottom （beneath the pellicle） of the buccal cavity, disorganization of the parental undulating membranes do not contribute to the formation of this primordium ; （2） FVT-cirral anlagen in both dividers develop independently, and very likely only a few midventral cirri join in the formation of these primordia; （ 3 ） both marginal row and dorsal kinety anlagen develop intrakinetally within the parental structure; （4） at the middle stage, macronuclear segments fuse together to form a single mass as observed in most of its related forms. 相似文献
8.
9.
A physics-based computational model has been developed that is capable of reliably predicting the motion of a 3-D mine-shaped object impacting the water surface from the air, and subsequently, dropping through the water toward the sea bottom. This deterministic model [mine's six-degree-of-freedom dynamics (MINE6D)] accounts for six-degree-of-freedom motions of the body including unsteady hydrodynamic interaction effects. MINE6D allows for physics-based modeling of other hydrodynamic effects due to water impact, viscous drag associated with flow separation and vortex shedding, air entrainment, and realistic flow environments. To demonstrate the efficacy of the model, we compare deterministic MINE6D predictions with tank drops tests and field measurements. MINE6D captures the myriad of complex 3-D motions of cylindrical mines observed in field and laboratory experiments. For relatively simple straight motions, it obtains quantitative comparisons with the field measurements for the kinematics of mines freely dropping in the water including water impact and air cavity effects. In practical applications, the environments are often quite irregular, and the releasing conditions are also with uncertainties. To provide some guidance in understanding and interpreting statistical characterizations of mine motions in practical environments, we perform Monte Carlo simulation using MINE6D. These statistical results are not only the essential input for stochastic bottom impact and burial predictions of mines but also useful for the design of mines. 相似文献
10.
自由落体贯入仪（free falling penetrometer,简称FFP）通过自由下落贯入土层中,由于其高效便捷的特性,越来越广泛地被应用于海底浅层土体原位勘察。采用耦合欧拉-拉格朗日（Coupled Eulerian Lagrangian,简称CEL）方法,进行了球形FFP在硬-软双层黏土中贯入的大变形有限元分析,考虑了土体的应变率和应变软化效应。与离心机试验、现场试验和数值模拟结果进行了对比,验证了模型的可靠性。分析了成层土对贯入过程的影响,发现FFP在贯入过程中上部硬黏土层形成空腔,且底部会伴随着土塞。通过广泛的变参数分析结果,拟合了球形FFP最终贯入深度与总能量之间的归一化表达式,建立了土体不排水抗剪强度、FFP直径和贯入速度与FFP在硬-软黏土层中最终贯入深度的关系。 相似文献
11.
Joseph N. Suhayda 《Marine Georesources & Geotechnology》2013,31(1-4):135-146
Abstract Field measurements of bottom oscillations and wave characteristics have been made in a study of the interaction of fine‐grained sediments and surface waves. A wave staff, pressure sensor, and accelerometer were used in East Bay, Louisiana, an area that has a fine‐grained clay bottom. The accelerometer contained three solid‐state accelerometers mounted at right angles. The instrument was placed about 0.3 m below the mudline. The results of the study indicate that bottom motions under wave action show well‐defined periodic features. The bottom sediments appear to be undergoing an elastic response to bottom pressures, such that the bottom is depressed under a surface wave crest. Under the range of bottom pressures measured, bottom displacement varied linearly with bottom pressure. Measured bottom pressures were up to 35% larger than predicted by linear wave theory. The effect of a movable bottom on wave pressure is considered. The energy lost from the surface wave to the bottom in forcing the bottom response is shown to be significant and larger than the energy lost to bottom friction. 相似文献
12.
The observed relation between the vertical distribution of suspended matter and the size distribution of bottom sediment in
the Hiuchi-Nada area indicates that a turbid bottom water layer exists above the bottom when the bottom sediment is of silt
size. The turbid bottom water is thought to be produced by resuspension of bottom sediment.
Measurements of the temporal variation of resuspended matter and water movement near the bottom was carried out for one full
tidal cycle at an anchored station. The concentration of resuspended matter reached a maximum at the time of strongest ebb
and flood flow. 相似文献
13.
通过大尺度水槽波浪引起泥沙悬移的动床模型实验,研究了沙坝海岸破波带内水底悬沙浓度形成机理,通过比较时间平均水底悬沙浓度与时间平均水底波浪水质点动能或时间平均水底湍动能之间的相关性,论证了利用时间平均湍动能比利用时间平均波浪水质点动能计算时间平均水底悬沙浓度更为适用,并提出了以上时间平均水底悬沙浓度与水底湍动能之间的关系也可以用来近似表达时间变化的水底悬沙浓度与时间变化的水底湍动能之间的关系。研究针对规则波、波群和不规则波3种波浪形态进行,并分别对破波带内的爬坡区、内破波区和沙坝区3个区域实验结果进行讨论。 相似文献
14.
The results of simultaneous measurements of the bottom (6.25 and 35 m above the bottom) currents, deep currents, and surface currents made at three points in the north-east tropical Pacific Ocean are given. The bottom intensification of the current velocity is revealed in a layer of 35–25 m above the bottom. The estimation of the thickness of the bottom boundary layer (BBL) indicates that the velocity intensification is observed over the boundary layer upper border. A 10-day long benthic storm with a maximum measured velocity of 13 cm/s was revealed 6 m above the bottom. As was found, the origin of the benthic storm is associated with the penetration of an anticyclonic eddy down to the bottom.Translated by Mikhail M. Trufanov. 相似文献
15.
对粗糙海底波导中信号的时间反转时空聚焦进行仿真研究。利用数值计算分析不同海底粗糙度RMS(平均起伏高度)下的聚焦效果,并与平整海底时作比较。研究结果表明:在本研究计算参数范围内,粗糙海底的RMS越大散射强度越大,信号在声源处的时间反转时空聚焦效果比平整海底时稍有减弱,但随着RMS增大无明显减弱。因此,时间反转技术适用于粗糙海底波导中的目标探测。 相似文献
16.
在典型的实验海区，使用双频测深仪和箱式取样器，对海底进行同步探测，获取双频测深仪不同底质类型数据。比较了式取样器海底底质样品，归纳出海底基岩、沙、粘土的双频测深仪水深数据和双频测深仪海底模拟记录图象特征，该特征可为双频测深仪识别海底底质类型提供先验认识。 相似文献
17.
Numerical simulation based on the Princeton Ocean Model (POM) was performed for a region of the Southeast Baltic in order to compare data on the spatial distribution of velocity and bottom sediments. Special attention was focused on the influence of western and northeastern winds, which generate intense quasi-geostrophic currents can may cause very high velocities in the near bottom layer, which results in the elution of bottom sediments and transport of their fine fractions. An abrupt change in wind velocity intensifies the effect of elution due to generation of inertial internal waves that penetrate into the bottom layer. The spatial distributions of the velocity in the surface and near bottom layers are compared with data on bottom sediments. It turned out that areas with the highest velocities that formed under the effect of western and northeastern winds in most cases coincide with areas where bottom sediments are represented by coarse-grain fractions of gravel and sands. 相似文献
18.
This study investigates how the refraction of water waves is affected by the higher-order bottom effect terms proportional to the square of bottom slope and to the bottom curvature in the extended mild-slope equations. Numerical analyses are performed on two cases of waves propagating over a circular shoal and over a circular hollow. Numerical results are analyzed using the eikonal equation derived from the wave equations and the wave ray tracing technique. It is found that the higher-order bottom effect terms change the wavelength and, in turn, change the refraction of waves over a variable depth. In the case of waves over a circular shoal, the higher-order bottom effects increase the wavelength along the rim of shoal more than near the center of shoal, and intensify the degree of wave refraction. However, the discontinuity of higher-order bottom effects along the rim of shoal disperses the foci of wave rays. As a result, the amplification of wave energy behind the shoal is reduced. Conversely, in the case of waves over a circular hollow, the higher-order bottom effects decrease the wavelength near the center of the hollow in comparison with the case of neglecting higher-order bottom effects. Consequently, the degree of wave refraction is decreased, and the spreading of wave energy behind the hollow is reduced. 相似文献
19.
Measurement of the vertical distribution of total suspended matter (TSM) was carried out during summer throughout the Seto Inland Sea. TSM concentration near the bottom is influenced significantly by water movement and turbid bottom water is observed in all areas where median grain size (Md) of the bottom sediment is more than 47gf. The high concentration of TSM near the bottom may be due to resuspension of the surface layer of bottom sediments. Comparison of the organic content of the resuspended matter with that of the bottom sediment shows that the resuspended matter contains more organic matter with a lower C : N ratio than the bottom sediment. The C : N ratio of the resuspended matter is similar to that of TSM in the surface layer of the water column. It is thought that TSM in surface waters sinks and settles on the surface of the bottom sediment. This deposited material is then easily resuspended in the water column by tidal currents before becoming permanently incorporated into the bottom sediment. 相似文献
20.
在河口海岸工程中,常常会面临岸滩冲蚀、岸线演变、航道淤积、建筑物底部淘刷等涉及泥沙起动和输运的问题,而水流对底床的剪切力是研究泥沙起动与输运的重要参数。本文利用自行设计的底床剪切力测量装置,在不同流速的水流中,分别在固定砂床(定床)和可移动砂床(动床)上进行了底部剪切力的直接测量;同时,根据试验中声学多普勒流速仪(ADV)测得的流速信息,采用湍流动能法对底床剪切力进行了估算。结果显示:当比例系数取值0.19时,估算出的底床剪切力与测量值吻合较好。对测量结果进行分析后发现,流速较小、砂粒未起动时,动、定砂床上的底部剪切力大致相同;在有砂粒起动的情况下,动床上的底部剪切力比定床上的大,相对差值最大约20%。因此当涉及底床剪切力的问题时,需要先确认床面形式,然后再进行分析研究。 相似文献