首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到18条相似文献，搜索用时 125 毫秒
1.
An improved absolute calibration technology based on indirect measurements was developed through two probative experiments, the performance of which was evaluated by applying the approach to in situ sea surface height(SSH) at the Tianheng Island(tidal gauge) and the satellite nadir(GPS buoy). Using Geoid/MSS(mean sea surface) data, which accounted for a constant offset between nadir and onshore tidal gauge water levels, and TMD(tidal model driver), which canceled out the time-varying offsets, nadir SSH(sea surface height) could be indirectly acquired at an onshore tidal gauge instead of from direct offshore observation. The approach extrapolated the onshore SSH out to the offshore nadir with an accuracy of(1.88±0.20) cm and a standard deviation of 3.3 cm, which suggested that the approach presented was feasible in absolute altimeter calibration/validation(Cal/Val), and the approach enormously facilitated the obtaining SSH from the offshore nadir.  相似文献   

2.
A dedicated GPS buoy is designed for calibration and validation(Cal/Val) of satellite altimeters since 2014. In order to evaluate the accuracy of the sea surface height(SSH) measured by the GPS buoy, twelve campaigns have been done within China sea area between 2014 and 2021. In six of these campaigns, two static Global Navigation Satellite System stations were installed at distances of <1 km and 19 km from the buoy to assess how the baseline length influenced the derived SSH from the buoy so...  相似文献   

3.
Haiyang-2A(HY-2A) is China's first ocean dynamic environment satellite and the radar altimeter is one of its main payloads. One of the main purposes of the radar altimeter is to measure the sea surface height(SSH). The SSH determined from the altimeter range measurements includes some range and geophysical corrections. These corrections largely affect the accuracy of the SSH measurements. The range and the geophysical corrections are reprocessed and the altimeter waveforms in HY-2A sensor interim geophysical data set records(S-IGDR) are retracked from June 1, 2014 to June 14, 2014, and the accuracy of the reprocessed SSH measurements is evaluated.The methods of the range and geophysical corrections used to reprocess HY-2A altimeter data are validated by using these methods to reprocess the Jason-2 range and geophysical corrections and comparing the results with the range and geophysical corrections in Jason-2 geophysical dataset records(GDR) product. A crossover analysis is used to evaluate the accuracy of the reprocessed HY-2A SSH measurements. The standard deviation(STD) of the crossover SSH differences for HY-2A is around 4.53 cm while the STD of the SSH differences between HY-2A and Jason-2 is around 5.22 cm. The performance of the reprocessed HY-2A SSH measurements is significantly improved with respect to the SSH measurements derived from HY-2A interim geophysical dataset records(IGDR)product. The 2015–2016 El Ni?o has been the strongest El Ni?o event since 1997–1998. The range and the geophysical corrections in HY-2A IGDR are reprocessed and sea level anomalies are used to monitor the2015–2016 El Ni?o. The results show that the HY-2A altimeter can well observe the 2015–2016 El Ni?o.  相似文献   

4.
Sea-level variation/change and thermal contribution in the Bering Sea   总被引：2，自引：0，他引：2  
The long-term sea-level trend in the Bering Sea is obtained by the analysis of TOPEX/Poseidon altimeter data, including the data of two tide gauges. The averaged sea-level in the Bering Sea rises at a rate of 2.47 mm/a from 1992 to 2002. The mean sea-level is falling in the most part of the Bering Sea, especially in its central basin, and it is rising in the northeastern part of the Bering Sea. During the 1998/99 change, the sea-level anomaly differences exhibit a significant sea-level anomaly fall in the deep basin of the Bering Sea,which is roughly in the same position where a prominent SST fall exists. The maximal fall of sea-level is about 10 cm in the southwestern part of the Bering Sea, and the maximal fall of about 2℃ in the SST also appeared in the same region as the sea level did.The steric sea-level change due to temperature variations is discussed. The results are compared with the TOPEX/Poseidon altimeter data at the different spatial scales. It is indicated that the seasonal amplitude of the steric height is about 35% of the observed TOPEX/Poseidon amplitude, which is much smaller than the 83% in the mid-latitudes area. The systematic difference between the TOPEX/Poseidon data with the range of about 7.5 cm and the thermal contribution with the range of about 2.5 cm is about 5 cm. This indicates that the thermal effect on the sea level is not as important as the case in the mid-latitudes area. In the Bering Sea, the phase of the steric height leads the observed sea level by about three months.  相似文献   

5.
An attempt is made to infer the global mean sea level(GMSL) from a global tide gauge network and frame the problem in terms of the limitations of the network. The network,owing to its limited number of gauges and poor geographical distribution complicated further by unknown vertical land movements,is ill suited for measuring the GMSL. Yet it remains the only available source for deciphering the sea level rise over the last 100 a. The poor sampling characteristics of the tide gauge network have necessitated the usage of statistical inference. A linear optimal estimator based on the Gauss-Markov theorem seems well suited for the job. This still leaves a great deal of freedom in choosing the estimator. GMSL is poorly correlated with tide gauge measurements because the small uniform rise and fall of sea level are masked by the far larger regional signals. On the other hand,a regional mean sea level(RMSL) is much better correlated with the corresponding regional tide gauge measurements. Since the GMSL is simply the sum of RMSLs,the problem is transformed to one of estimating the RMSLs from regional tide gauge measurements. Specifically for the annual heating and cooling cycle,we separate the global ocean into 10-latitude bands and compute for each 10-latitude band the estimator that predicts its RMSL from tide gauges within. In the future,the statistical correlations are to be computed using satellite altimetry. However,as a first attempt,we have used numerical model outputs instead to isolate the problem so as not to get distracted by altimetry or tide gauge errors. That is,model outputs for sea level at tide gauge locations of the GLOSS network are taken as tide gauge measurements,and the RMSLs are computed from the model outputs. The results show an estimation error of approximately 2 mm versus an error of 2.7 cm if we simply average the tide gauge measurements to estimate the GMSL,caused by the much larger regional seasonal cycle and mesoscale variation plaguing the individual tide gauges. The numerical model,Los Alamos POP model Run 11 lasting 3 1/4 a,is one of the best eddy-resolving models and does a good job simulating the annual heating and cooling cycle,but it has no global or regional trend. Thus it has basically succeeded in estimating the seasonal cycle of the GMSL. This is still going to be the case even if we use the altimetry data because the RMSLs are dominated by the seasonal cycle in relatively short periods. For estimating the GMSL trend,longer records and low-pass filtering to isolate the statistical relations that are of interest. Here we have managed to avoid the much larger regional seasonal cycle plaguing individual tide gauges to get a fairly accurate estimate of the much smaller seasonal cycle in the GMSL so as to enhance the prospect of an accurate estimate of GMSL trend in short periods. One should reasonably expect to be able to do the same for longer periods during which tide gauges are plagued by much larger regional interannual(e. g.,ENSO events) and decadal sea level variations. In the future,with the availability of the satellite altimeter data,we could use the same approach adopted here to estimate the seasonal variations of GMSL and RMSL accurately and remove these seasonal variations accordingly so as to get a more accurate statistical inference between the tide gauge data and the RMSLs(therefore the GMSL) at periods longer than 1 a,i. e.,the long-term trend.  相似文献   

6.
HY-2 has been launched by China on August 16, 2011 which assembles multi-microwave remote sensing payloads in a body and has the ability of monitoring ocean dynamic environments. The HY-2 satellite data need to be calibrated and validated before being put into use. Based on the in-situ buoys from the Nation- al Data Buoy Center （NDBC）, Ku-band significant wave heights （SWH, hs） of HY-2 altimeter are validated. Eleven months of HY-2 altimeter Level 2 products data are chose from October 1, 2011 to August 29, 2012. Using NDBC 60 buoys yield 902 collocations for HY-2 by adopting collocation criteria of 30 min for tempo- ral window and 50 km for a spatial window. An overall RMS difference of the SWH between HY-2 and buoy data is 0.297 m. A correlation coefficient between these is 0.964. An ordinary least squares （OLS） regression is performed with the buoy data as an independent variable and the altimeter data as a dependent vari- able. The regression equation of hs is hs （HY-2）=0.891 × hs （NDBC）＋0.022. In addition, 2016 collocations are matched with temporal window of 30 rain at the crossing points of HY-2 and Jason-2 orbits. RMS difference of Ku-band SWH between the two data sets is 0.452 m.  相似文献   

7.
A scanning microwave radiometer（RM） was launched on August 16,2011,on board HY-2 satellite.The six-month long global sea surface wind speeds observed by the HY-2 scanning microwave radiometer are preliminarily validated using in-situ measurements and WindSat observations,respectively,from January to June 2012.The wind speed root-mean-square（RMS） difference of the comparisons with in-situ data is 1.89 m/s for the measurements of NDBC and 1.72 m/s for the recent four-month data measured by PY30-1 oil platform,respectively.On a global scale,the wind speeds of HY-2 RM are compared with the sea surface wind speeds derived from WindSat,the RMS difference of 1.85 m/s for HY-2 RM collocated observations data set is calculated in the same period as above.With analyzing the global map of a mean difference between HY-2 RM and WindSat,it appears that the bias of the sea surface wind speed is obviously higher in the inshore regions.In the open sea,there is a relatively higher positive bias in the mid-latitude regions due to the overestimation of wind speed observations,while the wind speeds are underestimated in the Southern Ocean by HY-2 RM relative to WindSat observations.  相似文献   

8.
To better monitor the vertical crustal movements and sea level changes around Greenland, multiple data sources were used in this paper, including global positioning system(GPS), tide gauge, satellite gravimetry, satellite altimetry, glacial isostatic adjustment(GIA). First, the observations of more than 50 GPS stations from the international GNSS service(IGS) and Greenland network(GNET) in 2007–2018 were processed and the common mode error(CME) was eliminated with using the principal component analysis(PCA). The results show that all GPS stations show an uplift trend and the stations in southern Greenland have a higher vertical speed. Second, by deducting the influence of GIA, the impact of current Gr IS mass changes on GPS stations was analysed, and the GIA-corrected vertical velocity of the GPS is in good agreement with the vertical velocity obtained by gravity recovery and climate experiment(GRACE). Third, the absolute sea level change around Greenland at 4 gauge stations was obtained by combining relative sea level derived from tide gauge observations and crustal uplift rates derived from GPS observations, and was validated by sea level products of satellite altimetry. The results show that although the mass loss of Gr IS can cause considerable global sea level rise, eustatic movements along the coasts of Greenland are quite complex under different mechanisms of sea level changes.  相似文献   

9.
The HY-2A satellite is China's first independent oceanic dynamic environmental satellite, and has been operating continuously for more than six years. The satellite's radar altimeter, which is one of the main loads on the satellite,has the ability to realize all-weather and all-day observations of global sea-surface heights, as well as significant wave heights and sea-surface wind speeds. These observed data have been widely used in marine disaster prevention and reduction, along with resource development, maritime security and other fields. In order to achieve a comprehensive understanding of the multi-year overall observational performances of the HY-2A satellite's radar altimeter, all of the observational data of the IGDR product from October 26, 2012 to August 27,2017 were selected in this study for a comprehensive evaluation. The height measurement capability of the HY-2A satellite's radar altimeter was evaluated using self-crossover and Jason-2 crossover methods. The height discrepancies at the self-crossover point of the HY-2A satellite's ascending and descending orbits were also calculated. It was found that for the HY-2A satellite's radar altimeter in global waters under the restriction conditions of ascending and descending orbits, the height anomaly differences were within a range of less than 30 cm. The absolute mean error was determined to be 5.81 cm, and the height anomaly standard deviation was 7.76 cm. Under the conditions of the observational areas being limited within a scope of 60° from the Equator, it was determined that the sea-level height anomaly differences were less than 10 cm at the junction of the ascending and descending orbits, the absolute mean error was 3.95 cm. In addition, the sea-level height anomaly standard deviation was observed to be 4.76 cm. Using a mutual cross method with the Jason-2 satellite, it was found that under the conditions of the observational area being within the scope of 66° from the equator, the height anomaly differences at the junction were less than 30 cm, and the absolute mean error of HY-2A and Jason-2 sea level height anomaly was 5.86 cm, with a standard deviation of 7.52 cm. It was observed that, if within the sea area the sea level height anomaly difference was limited to within 10 cm, then the absolute mean error and standard deviation could reach 4.19 cm and 4.98 cm, respectively. It was confirmed that the HY-2A satellite's radar altimeter had successfully reached the height measurement level of similar international altimeters. Therefore, it had the ability to meet the needs of marine scientific research and ocean circulation inversions.  相似文献   

10.
The HY-2A satellite, which is equipped with a radar altimeter and was launched on August 16, 2011, is the first Chinese marine dynamic environmental monitoring satellite. Extracting ocean tides is one of the important applications of the radar altimeter data. The radar altimeter data of the HY-2A satellite from November 1, 2011 to August 16, 2014 are used herein to extract global ocean tides. The constants representing the tidal constituents are extracted by HY-2A RA data with harmonic analysis ...  相似文献   

11.
基于GNSS浮标和验潮资料的HY-2A卫星高度计绝对定标   总被引：1，自引：0，他引：1  
为探测我国HY-2A卫星高度计海面高测量绝对偏差及其在轨运行状态,本文利用GNSS浮标星下点同步测量和验潮资料海面高传递方法在山东千里岩和珠海担杆岛海域开展定标研究。为验证GNSS浮标定标方法的准确性,还对国外卫星Jason-2和Saral进行了定标实验。实验表明GNSS浮标绝对海面高测量精度达2 cm,对Jason-2和Saral高度计多个周期定标得到的海面高偏差均值分别为5.7 cm和-2.3 cm,与国际专门定标场的结果符合较好。2014年9月和2015年5月HY-2A卫星高度计浮标定标结果分别是-65 cm和-91 cm,因两次结果差异显著,故又利用千里岩验潮站资料对HY-2A卫星高度计第56至73周期进行了定标分析,结果证明HY-2A卫星海面高存在约-51 cm/a的漂移,置信度为95%的回归分析表明浮标和验潮定标结果符合。本文研究结果表明在我国尚无专门定标场的情况下,可利用GNSS浮标对我国高度计实施灵活、精准的在轨绝对定标,在有高度计轨迹经过验潮站的情况下可使用验潮资料结合精密大地水准面模型进行绝对定标。  相似文献   

12.
On May 22 and 24, 1995, a buoy, designed to float with the water surface and equipped with a GPS antenna, was deployed off the California coast at 16 locations near the Texaco oil platform, Harvest. The purpose of this deployment was threefold:.(1) to demonstrate the ability of this style of buoy to calibrate the TOPEXIPOSEIDON (TIP) altimeter range measurement as it overflew the platform: (2) to demonstrate the ability of the buoy to map the ocean's surface over a 10‐km‐diameter circle surrounding platform Harvest; and (3) to demonstrate the ability of the buoy to measure the sea state accurately. During the 1.6‐h period surrounding the time of the TIP overflight, the buoy‐measured sea level never differed by more than 1.5 cm from the sea level measured by the National Oceanic and Atmospheric Administration (NOAA) acoustic tide gauge on the platform. The good agreement demonstrated the capability of this style of buoy to calibrate altimetric satellites. A paraboloid was fitted to sea level from 16 buoy locations surrounding the platform with a 2.5‐cm rms residual. On a 10‐km‐diameter circle centered on the platform, the paraboloid was within 2.4‐cm rms of the Ohio State University Mean Sea Surface (OSUMSS95). H u3 values calculated around the overflight times from the GPS buoy vertical positions had a mean difference of 2 cm and a standard deviation of 18 cm from values calculated from the University of Colorado (CU) pressure gauge system. At the time of the overflight, H u3 was near 2 m, while 3‐m seas were observed by the CU pressure system during measurements later in the day. This experiment demonstrates that a simple wave‐rider buoy design can give comparable accuracies to that of more complex GPS platforms such as the University of Colorado's spar buoy, but is much easier to deploy and capable of being used in more severe weather conditions. Thus, such a buoy and derivative designs have great potential for calibrating altimetric experiments, and for oceanographic and geodetic mapping experiments.  相似文献   

13.
Satellite altimeter needs to be calibrated to evaluate the accuracy of sea surface height data. The dedicated altimeter calibration field needs to establish a special calibration strategy and needs to evaluate its calibration ability. This paper describes absolute calibration of HY-2B altimeter SSH using the GPS calibration method at the newly Wanshan calibration site, located in the Wanshan Islands, China. There are two HY-2B altimeter passes across the Wanshan calibration site. Pass No. 362 is descending and the ground track passes the east of Dan’gan Island. Pass No. 375 is ascending and crosses the Zhiwan Island. The GPS data processing strategy of Wanshan calibration site was established and the accuracy of GPS calibration method of Wanshan calibration site was evaluated. Meanwhile, the processing strategies of the HY-2B altimeter for the Wanshan calibration site were established, and a dedicated geoid model data were used to benefit the calibration accuracy. The time-averaged HY-2B altimeter bias was approximately 2.12 cm with a standard deviation of 2.08 cm. The performance of the HY-2B correction microwave radiometer was also evaluated in terms of the wet troposphere path delay and showed a mean difference ?0.2 cm with a 1.4 cm standard deviation with respect to the in situ GPS radiosonde.  相似文献   

14.
The strong increase in altimeter measurement errors near land surfaces is a limiting factor for coastal applications. We analyze the performance of the new Ka-band SARAL/AltiKa (SRL) mission in the northwestern Mediterranean Sea. SRL sea surface height (SSH) measurements are compared with those from the Jason-2 Ku-band satellite mission. The results show a significant increase in both quantity and quality of SSH data available near coastlines when using SRL data. Available edited data are 95.1% of SRL compared with 88.6% for Jason-2. Closer than 10 km to the coastline, available SRL data are still about 60% and only about 31% for Jason-2. Comparisons of the altimeter sea level variations are made with available coastal tide gauge data. The differences obtained between altimeter and tide gauge SLA time series are reduced for SRL (3.3 cm in average) compared with Jason-2 (4.2 cm in average), especially closer than 30 km to the land. It results in higher correlations (by 30%) obtained with SRL data. The coastal circulation derived from altimetry using SRL data shows an offshore meandering, which is more stable in time and with larger velocities close to the coast than that derived from Jason-2 observations.  相似文献   

15.
HY-2A卫星雷达高度计数据的全球统计评价及质量分析   总被引：6，自引：4，他引：2  
自HY-2A卫星发射以来,针对HY-2A卫星雷达高度计产品的交叉定标、真实性检验及质量评估工作一直在持续开展。本文主要以HY-2A卫星高度计第44周期的IGDR产品数据为例,通过使用全球分布图、二维直方图和每日均值统计的方法完成了与Jason-2IGDR产品的比对验证,同时对主要环境校正参数及地球物理产品的数据质量稳定性进行了分析,结果显示高度计产品数据质量较稳定,此外利用HY-2A卫星升降轨交叉点海面高度差、与Jason-2卫星交叉点海面高度差以及沿轨海平面异常数据分析的方法进行了HY-2A卫星高度计观测系统的性能评估,结果显示,HY-2A卫星海面高度精度约为7.48cm,精度接近Jason-2,能满足海洋应用与科学研究的需要。  相似文献   

16.
The double geodetic Corsica site, which includes Ajaccio-Aspretto and Cape Senetosa (40 km south Ajaccio) in the western Mediterranean area, has been chosen to permit the absolute calibration of radar altimeters. It has been developed since 1998 at Cape Senetosa and, in addition to the use of classical tide gauges, a GPS buoy is deployed every 10 days under the satellites ground track (10 km off shore) since 2000. The 2002 absolute calibration campaign made from January to September in Corsica revealed the necessity of deploying different geodetic techniques on a dedicated site to reach an accuracy level of a few mm: in particular, the French Transportable Laser Ranging System (FTLRS) for accurate orbit determination, and various geodetic equipment as well as a local marine geoid, for monitoring the local sea level and mean sea level. TOPEX/Poseidon altimeter calibration has been performed from cycle 208 to 365 using M-GDR products, whereas Jason-1 altimeter calibration used cycles from 1 to 45 using I-GDR products. For Jason-1, improved estimates of sea-state bias and columnar atmospheric wet path delay as well as the most precise orbits available have been used. The goal of this article is to give synthetic results of the analysis of the different error sources for the tandem phase and for the whole studied period, as geophysical corrections, orbits and reference frame, sea level, and finally altimeter biases. Results are at the millimeter level when considering one year of continuous monitoring; they show a great consistency between both satellites with biases of 6 ± 3 mm (ALT-B) and 120 ± 7 mm, respectively, for TOPEX/Poseidon and Jason-1.  相似文献   

17.
《Marine Geodesy》2013,36(3-4):261-284
The double geodetic Corsica site, which includes Ajaccio-Aspretto and Cape Senetosa (40 km south Ajaccio) in the western Mediterranean area, has been chosen to permit the absolute calibration of radar altimeters. It has been developed since 1998 at Cape Senetosa and, in addition to the use of classical tide gauges, a GPS buoy is deployed every 10 days under the satellites ground track (10 km off shore) since 2000. The 2002 absolute calibration campaign made from January to September in Corsica revealed the necessity of deploying different geodetic techniques on a dedicated site to reach an accuracy level of a few mm: in particular, the French Transportable Laser Ranging System (FTLRS) for accurate orbit determination, and various geodetic equipment as well as a local marine geoid, for monitoring the local sea level and mean sea level. TOPEX/Poseidon altimeter calibration has been performed from cycle 208 to 365 using M-GDR products, whereas Jason-1 altimeter calibration used cycles from 1 to 45 using I-GDR products. For Jason-1, improved estimates of sea-state bias and columnar atmospheric wet path delay as well as the most precise orbits available have been used. The goal of this article is to give synthetic results of the analysis of the different error sources for the tandem phase and for the whole studied period, as geophysical corrections, orbits and reference frame, sea level, and finally altimeter biases. Results are at the millimeter level when considering one year of continuous monitoring; they show a great consistency between both satellites with biases of 6 ± 3 mm (ALT-B) and 120 ± 7 mm, respectively, for TOPEX/Poseidon and Jason-1.  相似文献   

18.
HY-2 A (Haiyang-2 A) satellite was launched on August 16, 2011 and radar altimeter is one of its main payloads. We reprocessed two years of HY-2 A altimeter sensor geophysical dataset records (SGDR) data. This paper presents the main results in terms of reprocessed HY-2 A altimeter data quality: verification of data availability and validity, monitoring several relevant altimeter parameters, and assessment of the HY-2 A altimeter system performances. A cross-calibration analysis of reprocessed HY-2 A altimeter data with Jason-2 was conducted. The reprocessed HY-2 A altimeter data show good quality and have a low level of noise with respect to Jason-2. The same geophysical correction methods were used to calculate the sea surface height (SSH) for the two missions. The mean standard deviations of the crossover differences for HY-2 A and Jason-2 are 5.24 cm and 5.34 cm, respectively. The mean standard deviation of the crossover differences between HY-2 A and Jason-2 is 5.37 cm. These show that HY-2 A can provide SSH measurements at almost the same level of accuracy as Jason-2. The relative SSH bias between HY-2 A and Jason-2 due to the Ultra Stable Oscillator (USO) drift is obviously observed, and it can affect the calculation of mean sea level and should be further studied and corrected.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号