共查询到20条相似文献，搜索用时 31 毫秒
1.
Ole Baltazar Andersen Karina Nielsen Per Knudsen Chris W. Hughes Rory Bingham Luciana Fenoglio-Marc 《Marine Geodesy》2013,36(6):517-545
AbstractThe ocean mean dynamic topography (MDT) is the surface representation of the ocean circulation. The MDT may be determined by the ocean approach, which involves temporal averaging of numerical ocean circulation model information, or by the geodetic approach, wherein the MDT is derived using the ellipsoidal height of the mean sea surface (MSS), or mean sea level (MSL) minus the geoid as the geoid. The ellipsoidal height of the MSS might be estimated either by satellite or coastal tide gauges by connecting the tide gauge datum to the Earth-centred reference frame. In this article we present a novel approach to improve the coastal MDT, where the solution is based on both satellite altimetry and tide gauge data using new set of 302 tide gauges with ellipsoidal heights through the SONEL network. The approach was evaluated for the Northeast Atlantic coast where a dense network of GNSS-surveyed tide gauges is available. The typical misfit between tide gauge and satellite or oceanographic MDT was found to be around 9?cm. This misfit was found to be mainly due to small scale geoid errors. Similarly, we found, that a single tide gauge places only weak constraints on the coastal dynamic topography. 相似文献
2.
Changes in the height of the ocean can be described through the relative and absolute sea level changes depending on the geodetic reference the sea level records are related to. Satellite altimetry provides absolute sea level (ASL) measurements related to the global geodetic reference, whereas tide gauges provide relative sea level (RSL) measurements related to the adjacent land. This study aims at computing the ASL surfaces for different time epochs from combined satellite altimeter and tide gauge records. A method of sea level data fusion is proposed to enable modeling of the impact of present and future sea level changes on the coast. Sea surface modeling was investigated for ten different gridding methods commonly used for the interpolation of altimeter data over the open ocean and extrapolation over the coastal zones. The performance of gridding methods was assessed based on the comparison of the gridded altimeter data and corrected tide gauge measurements. Finally, the sea level surfaces related to the GRS80 global reference ellipsoid were computed for the Mediterranean Sea over the altimeter period. In addition, the current sea level trends were estimated from both sea level measurements. 相似文献
3.
Arctic absolute sea level variations were analyzed based on multi-mission satellite altimetry data and tide gauge observations for the period of 1993–2018. The range of linear absolute sea level trends were found ?2.00 mm/a to 6.88 mm/a excluding the central Arctic, positive trend rates were predominantly located in shallow water and coastal areas, and negative rates were located in high-latitude areas and Baffin Bay. Satellite-derived results show that the average secular absolute sea level trend was (2.53±0.42) mm/a in the Arctic region. Large differences were presented between satellite-derived and tide gauge results, which are mainly due to low satellite data coverage, uncertainties in tidal height processing and vertical land movement (VLM). The VLM rates at 11 global navigation satellite system stations around the Arctic Ocean were analyzed, among which 6 stations were tide gauge co-located, the results indicate that the absolute sea level trends after VLM corrected were of the same magnitude as satellite altimetry results. Accurately calculating VLM is the primary uncertainty in interpreting tide gauge measurements such that differences between tide gauge and satellite altimetry data are attributable generally to VLM. 相似文献
4.
本文对比了3个不同机构提供的北冰洋月均高度计数据,发现英国极地观测与建模中心和丹麦科技大学空间中心两套数据比较一致且空间覆盖率高,适用于北冰洋海平面变化研究,而前者在数据分辨率、平滑性和与验潮站的符合程度方面均更优。对高度计和验潮站数据的分析表明,北冰洋海平面的气候态特征表现为加拿大海盆的高值和欧亚海盆的低值之间形成鲜明对比;海平面的变化以季节变化和北极涛动引起的低频变化为主,加拿大海盆的季节和年际振幅均较大,俄罗斯沿岸海平面季节变化显著。2003?2014年,北冰洋平均海平面呈上升趋势,其中加拿大海盆海平面上升最快,而俄罗斯沿岸海平面有微弱下降趋势。加拿大海盆和俄罗斯沿岸由于海冰变化显著,不同高度计产品以及高度计与验潮站数据之间差别较大,使用时需慎重。 相似文献
5.
Tide gauges distributed all over the world provide valuable information for monitoring mean sea level changes. The statistical models used in estimating sea level change from the tide gauge data assume implicitly that the random model components are stationary in variance. We show that for a large number of global tide gauge data this is not the case for the seasonal part using a variate-differencing algorithm. This finding is important for assessing the reliability of the present estimates of mean sea level changes because nonstationarity of the data may have marked impact on the sea level rate estimates, especially, for the data from short records. 相似文献
6.
Tide gauges distributed all over the world provide valuable information for monitoring mean sea level changes. The statistical models used in estimating sea level change from the tide gauge data assume implicitly that the random model components are stationary in variance. We show that for a large number of global tide gauge data this is not the case for the seasonal part using a variate-differencing algorithm. This finding is important for assessing the reliability of the present estimates of mean sea level changes because nonstationarity of the data may have marked impact on the sea level rate estimates, especially, for the data from short records. 相似文献
7.
This paper attempts to assess the use of Global Navigation Satellite System (GNSS) as an accurate, reliable, and easy tool for sea level measurement. The GNSS technique was incorporated into a float based tide gauge system. A prototype of such an instrument was developed based on principles of conventional tide gauges, where high frequency noise is reduced mechanically. The ability of the GNSS based tide gauge (GTG) to monitor sea levels was tested in several experiments. The performance of the GTG was compared to that of a traditional tide gauge. The method of data analysis and data comparison between the GPS measurements and the tide gauge data is presented. The results show that the GTG is equal in performance to the traditional float operated tide gauge. It seems that the GTG is capable of delivering the same level of accuracy (1 cm), and its results are as reliable as its competitor, the traditional float tide gauge. The suggested instrument can be easily integrated into the array of permanent GNSS stations and assist in absolute measurements of sea level changes, caused by global warming and the greenhouse effect, for example. 相似文献
8.
This paper attempts to assess the use of Global Navigation Satellite System (GNSS) as an accurate, reliable, and easy tool for sea level measurement. The GNSS technique was incorporated into a float based tide gauge system. A prototype of such an instrument was developed based on principles of conventional tide gauges, where high frequency noise is reduced mechanically. The ability of the GNSS based tide gauge (GTG) to monitor sea levels was tested in several experiments. The performance of the GTG was compared to that of a traditional tide gauge. The method of data analysis and data comparison between the GPS measurements and the tide gauge data is presented. The results show that the GTG is equal in performance to the traditional float operated tide gauge. It seems that the GTG is capable of delivering the same level of accuracy (1 cm), and its results are as reliable as its competitor, the traditional float tide gauge. The suggested instrument can be easily integrated into the array of permanent GNSS stations and assist in absolute measurements of sea level changes, caused by global warming and the greenhouse effect, for example. 相似文献
9.
A comprehensive set of 456 monthly tide gauge records is analyzed for trend and acceleration over the same period that satellite altimetry was analyzed (1993 to 2011). Additionally, a 90 tide gauge record subset is analyzed for which GPS data are available. The selection criterion for the tide gauge data is 85% data completion. All measurements are adjusted for vertical land motion. Results from 456 pairs of tide gauges, adjusted for Global Isostatic Adjustment, and satellite recordings located within 1° root-mean-square latitude and longitude separation differences are compared. The tide gauge trends and accelerations are adjusted for spatial bias using the more globally dense satellite data.The average trends of the 456 and 90 gauge sets (3.26 and 2.68 mm/year, respectively) agree reasonably well with the global trend average of the satellite data (3.09 mm/year). Average trends for the 456 tide gauges are also in good agreement (within 95% confidence limits) with trends based on satellite data within the 1° satellite proximity criterion (3.26 and 3.31 mm/year, respectively). The trends for the 90 gauges with GPS nearby and qualifying satellite locations are 2.68 and 2.74 mm/year, respectively. For all datasets analyzed, the accelerations are quite strongly negative but the uncertainty is relatively large. Adjustment of the tide gauge trends for spatial bias modified both trends and accelerations significantly and decreased trend differences between the 456 and 90 gauge datasets. The spatially adjusted tide gauge trends (2.95 and 2.72 mm/year, respectively for the 456 and 90 tide gauges sets) are somewhat less than the 1° spatially adjusted satellite data (3.09 mm/year). Whether the increased sea level trend of approximately 3 mm/year measured by the satellites since the 1990's is a long-term increase from the 20th Century value of approximately 1.7 mm/year or part of a cycle will require longer records; however, the negative accelerations support some cyclic character. 相似文献
10.
Long (>30 years) monthly records of relative sea-level heights from tide gauges in the Baltic sea are analyzed. Time series clustering based on forecast densities is applied in order to describe regional sea-level variability in the Baltic Sea in terms of future relative heights. The tide gauge records are clustered on the basis of forecasts at 3-month and 6-month horizons. For the 3-month horizon, the results of the cluster analysis show a fairly spatial coherency in terms of grouping together locations from the same sub-basin, with the northern records in the Bothnian Sea and Gulf of Finland clustering together, followed by the tide gauges in the Baltic Proper and lastly the southernmost stations in the western Baltic. For the 6-month horizon, the results show a higher degree of homogeneity between different locations, but a clear separation between the stations at the Baltic entrance and the tide gauges inside the Baltic basin. Moreover, when considering detrended records, reflecting mainly the seasonal cycle, the clustering results are more homogeneous and suggest a distinct response of coastal sea-level in spring and in summer. 相似文献
11.
Geodesists around the world have begun installing continuous GPS (CGPS) stations at tide gauges in order to determine the exact position of these tide gauges and, in particular, the vertical velocity of the land or the seafloor underlying each tide gauge. The goal is to make these measurements in a well-defined global reference frame. The scientific applications of these measurements include the calibration of satellite altimeters and the removal of crustal motion signals from long time series of sea level change. In this article we focus on the technical issues associated with this agenda, including site selection, instrumentation, monumentation, ancillary measurements, and the tide gauge leveling program. There is no universally best approach to building CGPS stations at tide gauges. Therefore we emphasize the various trade-offs that typically occur, and give general recommendations and rules of thumb based on recent installations and experience. Additional information can be found at the CGPS@TG website. 相似文献
12.
Technical Issues and Recommendations Related to the Installation of Continuous GPS Stations at Tide Gauges 总被引：1，自引：0，他引：1
Geodesists around the world have begun installing continuous GPS (CGPS) stations at tide gauges in order to determine the exact position of these tide gauges and, in particular, the vertical velocity of the land or the seafloor underlying each tide gauge. The goal is to make these measurements in a well-defined global reference frame. The scientific applications of these measurements include the calibration of satellite altimeters and the removal of crustal motion signals from long time series of sea level change. In this article we focus on the technical issues associated with this agenda, including site selection, instrumentation, monumentation, ancillary measurements, and the tide gauge leveling program. There is no universally best approach to building CGPS stations at tide gauges. Therefore we emphasize the various trade-offs that typically occur, and give general recommendations and rules of thumb based on recent installations and experience. Additional information can be found at the CGPS@TG website. 相似文献
13.
Chung-Yen Kuo Huan-Chin Kao Hyongki Lee Kai-Chien Cheng Li-Ching Lin 《Marine Geodesy》2013,36(2):188-197
This study focuses on assessing the accuracy of 20-Hz waveform retracked Jason-2 (J-2) altimetry sea surface heights (SSHs) in the vicinity of Taiwan by comparisons with the TOPEX/Poseidon (T/P) 10-Hz SSHs and sea level data from the Anping tide gauge. The study areas exhibit high, medium, and low amplitudes of ocean tides and contain diverse bathymetries with depths of 0–4000 m. The performance of Offset Center of Gravity (OCOG), threshold, modified threshold, and ice retrackers was examined by comparing the retracked SSHs with Earth Gravitational Model 2008 (EGM08) geoid via the use of the improvement percentages (IMPs). The results indicate that both altimetry measurements are significantly improved by waveform retracking techniques, with a maximum IMP of 46.6% for T/P and 82.0% for J-2, and the optimal achievement of retrackers is influenced by the characteristics of the study areas. In addition, valid retracked J-2 SSHs are much closer to shorelines than T/P. A comparison of retracked J-2 data with Anping tide gauge records reveals that applying the optimal retracking algorithms reduces the root mean squares of differences and increases the number of valid measurements. 相似文献
14.
To better monitor the vertical crustal movements and sea level changes around Greenland, multiple data sources were used in this paper, including global positioning system(GPS), tide gauge, satellite gravimetry, satellite altimetry, glacial isostatic adjustment(GIA). First, the observations of more than 50 GPS stations from the international GNSS service(IGS) and Greenland network(GNET) in 2007–2018 were processed and the common mode error(CME) was eliminated with using the principal component analysis(PCA). The results show that all GPS stations show an uplift trend and the stations in southern Greenland have a higher vertical speed. Second, by deducting the influence of GIA, the impact of current Gr IS mass changes on GPS stations was analysed, and the GIA-corrected vertical velocity of the GPS is in good agreement with the vertical velocity obtained by gravity recovery and climate experiment(GRACE). Third, the absolute sea level change around Greenland at 4 gauge stations was obtained by combining relative sea level derived from tide gauge observations and crustal uplift rates derived from GPS observations, and was validated by sea level products of satellite altimetry. The results show that although the mass loss of Gr IS can cause considerable global sea level rise, eustatic movements along the coasts of Greenland are quite complex under different mechanisms of sea level changes. 相似文献
15.
A New Methodology for Incorporating Tide Gauge Data in Sea Surface Topography Models 总被引：1，自引：0，他引：1
As part of the Vertical Offshore Reference Frames (VORF) project sponsored by the U. K. Hydrographic Office, a new model for Sea Surface Topography (SST) around the British Isles has been developed. For offshore areas (greater than 30 km from the coast), this model is largely derived from satellite altimetry. However, its accuracy and level of detail have been enhanced in coastal areas by the inclusion of not only the 60 PSMSL tide gauges with long-term records around the coasts of the United Kingdom and Ireland but also some 385 gauges established at different epochs and for different observation spans by the U. K. Admiralty. All tide gauge data were brought into a common reference frame by a combination of datum models and direct GPS observations, but a more significant challenge was to bring all short-term sea level observations to an unbiased value at a common epoch. This was achieved through developing a spatial-temporal correlation model for the variations in mean sea level around the British Isles, which in turn meant that gauges with long-term observation spans could be used as control points to improve the accuracy of Admiralty gauges. It is demonstrated that the latter can contribute point observations of mean sea level (MSL) with a precision of 0.078 m. A combination of least squares collocation and interpolation was developed to merge the coastal point and offshore gridded data sets, with particular algorithms having to be developed for different configurations of coastal topology. The resulting model of sea surface topography is shown to present a smooth transition from inshore coastal areas to offshore zones. Further benefits of the techniques developed include an enhanced methodology for detecting datum discontinuities at permanent tide gauges. 相似文献
16.
17.
《Ocean Modelling》2010,34(3-4):270-282
A set of tools for the statistical assessment of ocean observing networks is presented and applied for the analysis of different instrumentation scenarios in the German Bight. An optimal linear estimator is used to re-construct ocean state parameters from observations taking into account both the prior distribution of the state and measurement errors. The proposed method enables a re-construction of any scalar parameter or vector field with linear relationship to the state. The performance of the observing network is quantified in terms of the re-construction quality. Apart from the capability of the network to provide estimates of state parameters at the time of the observations, the potential of the measurements for forecasts is investigated as well. Furthermore, a generic method to compare single measurements with continuous observations is presented. Finally, a technique is described to quantify the relative importance of different components of an observational network.The proposed methods are applied to water level measurements in the German Bight. A numerical model is used to estimate the background statistics. Synthetic measurements provided by tide gauges, satellite altimeters, and HF radar are considered in the analysis. The estimation of the complete water level field in the German Bight is compared for altimeter and tide gauge measurements. It is shown that the orientation of the satellite track with respect to the coastline is of high relevance. The importance of water level measurements taken in deeper water, e.g., at the FINO-1 platform, is demonstrated. It is shown that continuous tide gauge measurements provide more information on the area mean water level in the German Bight than altimeter observations taken by ENVISAT and JASON-1/2. It is furthermore shown how the information provided by a tide gauge propagates with the Kelvin wave. Implications for the design of an assimilation scheme are discussed. 相似文献
18.
长江口、钱塘江口和珠江口是受咸潮影响较为严重的区域。本文利用全国沿海海平面变化影响调查、沿海水文观测等数据,分析了近十年长江口、珠江口和钱塘江口咸潮入侵的变化特征及影响。分析结果表明:(1) 2009-2018年,长江口咸潮入侵次数和持续时间均呈减少趋势,该时段长江口共监测到约48次咸潮入侵过程,发生时间集中在9-10月至翌年5月,其中3月和11月入侵次数较多,分别为12次和7次。(2)钱塘江口咸潮入侵过程受沿海季节性海平面影响显著,12月至翌年3月为钱塘江口季节性低海平面期,4-7月上旬径流量较大,上述两个时期钱塘江口受咸潮入侵的影响均较小,7月下旬至11月上旬,钱塘江口处于季节性高海平面期,是咸潮影响的集中时段。(3) 2009-2018年,珠江口共监测到约57次咸潮入侵过程,发生时间集中在9-10月至翌年3-4月,其中1月、2月和10月咸潮入侵次数较多,均超过10次,2015年至今咸潮持续时间明显增加。(4)咸潮入侵次数和持续时间与基础海面和径流量等密切相关,咸潮入侵影响三大河口沿线水厂供水以及工农业生产取水,给沿岸城市的居民生活、工农业生产和渔业养殖等造成一定不利影响。 相似文献
19.