首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
Geodesists around the world have begun installing continuous GPS (CGPS) stations at tide gauges in order to determine the exact position of these tide gauges and, in particular, the vertical velocity of the land or the seafloor underlying each tide gauge. The goal is to make these measurements in a well-defined global reference frame. The scientific applications of these measurements include the calibration of satellite altimeters and the removal of crustal motion signals from long time series of sea level change. In this article we focus on the technical issues associated with this agenda, including site selection, instrumentation, monumentation, ancillary measurements, and the tide gauge leveling program. There is no universally best approach to building CGPS stations at tide gauges. Therefore we emphasize the various trade-offs that typically occur, and give general recommendations and rules of thumb based on recent installations and experience. Additional information can be found at the CGPS@TG website.  相似文献   

2.
Tide gauge data is important for determining global or local sea level rise with respect to a global geocentric reference frame. Data from repeated precise levelling connections between the tide gauges and a series of coastal and inland benchmarks, including Continuous GPS (CGPS) benchmarks, are used to determine the stability of tide gauges at 12 locations in the South Pacific. The method for determining this stability is based on a constant velocity model which minimises the net movement amongst a set of datum benchmarks surveyed since the installation of the tide gauges. When assessed at a 95% confidence interval, and with the exception of the Solomon Islands, none of the tide gauges were found to be in motion relative to their CGPS benchmarks. The Solomon Islands estimate is considered to be unreliable since the CGPS benchmark was recently established and has been surveyed fewer than three times. In Tonga and Cook Islands, the tide gauges were found to be disturbed or affected by survey errors whereas the Vanuatu results were affected by earthquakes.  相似文献   

3.
王冬  张墨起  张媛  刘雷 《海洋测绘》2013,33(1):46-48
基于余水位的配置模型,通过潮汐调和分析,利用已知长期验潮站余水位结合临近短期验潮站天文潮位来恢复短期站的实际水位,并对其进行误差分析,证明基于余水位进行推算未知验潮站潮位的可行性与实用性。为了保证验潮仪采集数据的精确度,基于日(月)平均海面在较大的空间尺度内有较强的相关性这一原理,对短期验潮站验潮仪零点漂移进行检测,并对其进行误差分析。  相似文献   

4.
An attempt is made to infer the global mean sea level(GMSL) from a global tide gauge network and frame the problem in terms of the limitations of the network. The network,owing to its limited number of gauges and poor geographical distribution complicated further by unknown vertical land movements,is ill suited for measuring the GMSL. Yet it remains the only available source for deciphering the sea level rise over the last 100 a. The poor sampling characteristics of the tide gauge network have necessitated the usage of statistical inference. A linear optimal estimator based on the Gauss-Markov theorem seems well suited for the job. This still leaves a great deal of freedom in choosing the estimator. GMSL is poorly correlated with tide gauge measurements because the small uniform rise and fall of sea level are masked by the far larger regional signals. On the other hand,a regional mean sea level(RMSL) is much better correlated with the corresponding regional tide gauge measurements. Since the GMSL is simply the sum of RMSLs,the problem is transformed to one of estimating the RMSLs from regional tide gauge measurements. Specifically for the annual heating and cooling cycle,we separate the global ocean into 10-latitude bands and compute for each 10-latitude band the estimator that predicts its RMSL from tide gauges within. In the future,the statistical correlations are to be computed using satellite altimetry. However,as a first attempt,we have used numerical model outputs instead to isolate the problem so as not to get distracted by altimetry or tide gauge errors. That is,model outputs for sea level at tide gauge locations of the GLOSS network are taken as tide gauge measurements,and the RMSLs are computed from the model outputs. The results show an estimation error of approximately 2 mm versus an error of 2.7 cm if we simply average the tide gauge measurements to estimate the GMSL,caused by the much larger regional seasonal cycle and mesoscale variation plaguing the individual tide gauges. The numerical model,Los Alamos POP model Run 11 lasting 3 1/4 a,is one of the best eddy-resolving models and does a good job simulating the annual heating and cooling cycle,but it has no global or regional trend. Thus it has basically succeeded in estimating the seasonal cycle of the GMSL. This is still going to be the case even if we use the altimetry data because the RMSLs are dominated by the seasonal cycle in relatively short periods. For estimating the GMSL trend,longer records and low-pass filtering to isolate the statistical relations that are of interest. Here we have managed to avoid the much larger regional seasonal cycle plaguing individual tide gauges to get a fairly accurate estimate of the much smaller seasonal cycle in the GMSL so as to enhance the prospect of an accurate estimate of GMSL trend in short periods. One should reasonably expect to be able to do the same for longer periods during which tide gauges are plagued by much larger regional interannual(e. g.,ENSO events) and decadal sea level variations. In the future,with the availability of the satellite altimeter data,we could use the same approach adopted here to estimate the seasonal variations of GMSL and RMSL accurately and remove these seasonal variations accordingly so as to get a more accurate statistical inference between the tide gauge data and the RMSLs(therefore the GMSL) at periods longer than 1 a,i. e.,the long-term trend.  相似文献   

5.
The Baltic Sea Level Project is an international scientific observation program to unify the vertical datums of the countries of the Baltic Sea with GPS measurements. In total, 35 tide gauges on shores and islands of the Baltic were occupied with GPS in 1993. After computing a new gravimetric geoid over the Baltic Sea, it was possible to unify the datums as well as to calculate the orthometric heights and the sea surface topography values for the tide gauge stations. The results obtained are shown.  相似文献   

6.
Long (>30 years) monthly records of relative sea-level heights from tide gauges in the Baltic sea are analyzed. Time series clustering based on forecast densities is applied in order to describe regional sea-level variability in the Baltic Sea in terms of future relative heights. The tide gauge records are clustered on the basis of forecasts at 3-month and 6-month horizons. For the 3-month horizon, the results of the cluster analysis show a fairly spatial coherency in terms of grouping together locations from the same sub-basin, with the northern records in the Bothnian Sea and Gulf of Finland clustering together, followed by the tide gauges in the Baltic Proper and lastly the southernmost stations in the western Baltic. For the 6-month horizon, the results show a higher degree of homogeneity between different locations, but a clear separation between the stations at the Baltic entrance and the tide gauges inside the Baltic basin. Moreover, when considering detrended records, reflecting mainly the seasonal cycle, the clustering results are more homogeneous and suggest a distinct response of coastal sea-level in spring and in summer.  相似文献   

7.
Abstract

The ocean mean dynamic topography (MDT) is the surface representation of the ocean circulation. The MDT may be determined by the ocean approach, which involves temporal averaging of numerical ocean circulation model information, or by the geodetic approach, wherein the MDT is derived using the ellipsoidal height of the mean sea surface (MSS), or mean sea level (MSL) minus the geoid as the geoid. The ellipsoidal height of the MSS might be estimated either by satellite or coastal tide gauges by connecting the tide gauge datum to the Earth-centred reference frame. In this article we present a novel approach to improve the coastal MDT, where the solution is based on both satellite altimetry and tide gauge data using new set of 302 tide gauges with ellipsoidal heights through the SONEL network. The approach was evaluated for the Northeast Atlantic coast where a dense network of GNSS-surveyed tide gauges is available. The typical misfit between tide gauge and satellite or oceanographic MDT was found to be around 9?cm. This misfit was found to be mainly due to small scale geoid errors. Similarly, we found, that a single tide gauge places only weak constraints on the coastal dynamic topography.  相似文献   

8.
We have computed estimates of the rate of vertical land motion in the Mediterranean Sea from differences of sea level heights measured by the TOPEX/Poseidon radar altimeter and by a set of tide gauge stations. The comparison of data at 16 tide gauges, using both hourly data from local datasets and monthly data from the PSMSL dataset, shows a general agreement, significant differences are found at only one location. Differences of near-simultaneous, monthly and deseasoned monthly sea level height time-series have been considered in order to reduce the error in the estimated linear-term. In a subset of 23 tide gauge stations the mean accuracy of the estimated vertical rates is 2.3 ± 0.8 mm/yr. Results for various stations are in agreement with estimates of vertical land motion from geodetic methods. A comparison with vertical motion estimated by GPS at four locations shows a mean difference of -0.04 ± 1.8 mm/yr, however the length of the GPS time-series and the number of locations are too small to draw general conclusions.  相似文献   

9.
We have computed estimates of the rate of vertical land motion in the Mediterranean Sea from differences of sea level heights measured by the TOPEX/Poseidon radar altimeter and by a set of tide gauge stations. The comparison of data at 16 tide gauges, using both hourly data from local datasets and monthly data from the PSMSL dataset, shows a general agreement, significant differences are found at only one location. Differences of near-simultaneous, monthly and deseasoned monthly sea level height time-series have been considered in order to reduce the error in the estimated linear-term. In a subset of 23 tide gauge stations the mean accuracy of the estimated vertical rates is 2.3 ± 0.8 mm/yr. Results for various stations are in agreement with estimates of vertical land motion from geodetic methods. A comparison with vertical motion estimated by GPS at four locations shows a mean difference of ?0.04 ± 1.8 mm/yr, however the length of the GPS time-series and the number of locations are too small to draw general conclusions.  相似文献   

10.
This paper attempts to assess the use of Global Navigation Satellite System (GNSS) as an accurate, reliable, and easy tool for sea level measurement. The GNSS technique was incorporated into a float based tide gauge system. A prototype of such an instrument was developed based on principles of conventional tide gauges, where high frequency noise is reduced mechanically. The ability of the GNSS based tide gauge (GTG) to monitor sea levels was tested in several experiments. The performance of the GTG was compared to that of a traditional tide gauge. The method of data analysis and data comparison between the GPS measurements and the tide gauge data is presented. The results show that the GTG is equal in performance to the traditional float operated tide gauge. It seems that the GTG is capable of delivering the same level of accuracy (1 cm), and its results are as reliable as its competitor, the traditional float tide gauge. The suggested instrument can be easily integrated into the array of permanent GNSS stations and assist in absolute measurements of sea level changes, caused by global warming and the greenhouse effect, for example.  相似文献   

11.
This paper attempts to assess the use of Global Navigation Satellite System (GNSS) as an accurate, reliable, and easy tool for sea level measurement. The GNSS technique was incorporated into a float based tide gauge system. A prototype of such an instrument was developed based on principles of conventional tide gauges, where high frequency noise is reduced mechanically. The ability of the GNSS based tide gauge (GTG) to monitor sea levels was tested in several experiments. The performance of the GTG was compared to that of a traditional tide gauge. The method of data analysis and data comparison between the GPS measurements and the tide gauge data is presented. The results show that the GTG is equal in performance to the traditional float operated tide gauge. It seems that the GTG is capable of delivering the same level of accuracy (1 cm), and its results are as reliable as its competitor, the traditional float tide gauge. The suggested instrument can be easily integrated into the array of permanent GNSS stations and assist in absolute measurements of sea level changes, caused by global warming and the greenhouse effect, for example.  相似文献   

12.
Abstract

Canada has increased the number of tsunami warning stations on the Pacific Coast from two to three. The last gauge was installed at the north end of Vancouver Island, thereby filling a large gap previously existing and providing full coverage along the coast. The record of gauges at two of the three locations is accessible either by telephone or by means of meteor burst communication, alleviating the difficulties experienced during the tsunami threat of May 6, 1986, when telephone communications were disrupted by heavy use. The gauge at Langara Island will be relocated in a more accessible and also a more tsunami‐responsive location at Rennell Sound in the Queen Charlotte Islands. All tsunami gauges also serve as tide gauges, recording the water level every 15 min. In the event of a tsunami, the recording interval can be altered to every 60 s. Suggestions have been made that Canada attempt deep‐sea recording of tsunamis off its Pacific Coast. Although this would be of great scientific value, no such program is contemplated at this time.  相似文献   

13.
针对使用自容式压力验潮仪在布设临时验潮站时常出现的验潮零点漂移技术难题,基于附近长期验潮站的潮汐观测数据来计算二站同步时段内逐时日平均海面之差值,以此修正临时验潮站观测数据中隐含的验潮零点逐时漂移量。以福建平潭长期站和王爷山、牛山岛两个临时站的验潮数据为例,进行了自容式压力验潮仪验潮零点漂移处理的实践。结果表明本文相关模型具可操作性和实用价值。  相似文献   

14.
Arctic absolute sea level variations were analyzed based on multi-mission satellite altimetry data and tide gauge observations for the period of 1993–2018. The range of linear absolute sea level trends were found ?2.00 mm/a to 6.88 mm/a excluding the central Arctic, positive trend rates were predominantly located in shallow water and coastal areas, and negative rates were located in high-latitude areas and Baffin Bay. Satellite-derived results show that the average secular absolute sea level trend was (2.53±0.42) mm/a in the Arctic region. Large differences were presented between satellite-derived and tide gauge results, which are mainly due to low satellite data coverage, uncertainties in tidal height processing and vertical land movement (VLM). The VLM rates at 11 global navigation satellite system stations around the Arctic Ocean were analyzed, among which 6 stations were tide gauge co-located, the results indicate that the absolute sea level trends after VLM corrected were of the same magnitude as satellite altimetry results. Accurately calculating VLM is the primary uncertainty in interpreting tide gauge measurements such that differences between tide gauge and satellite altimetry data are attributable generally to VLM.  相似文献   

15.
A comprehensive set of 456 monthly tide gauge records is analyzed for trend and acceleration over the same period that satellite altimetry was analyzed (1993 to 2011). Additionally, a 90 tide gauge record subset is analyzed for which GPS data are available. The selection criterion for the tide gauge data is 85% data completion. All measurements are adjusted for vertical land motion. Results from 456 pairs of tide gauges, adjusted for Global Isostatic Adjustment, and satellite recordings located within 1° root-mean-square latitude and longitude separation differences are compared. The tide gauge trends and accelerations are adjusted for spatial bias using the more globally dense satellite data.The average trends of the 456 and 90 gauge sets (3.26 and 2.68 mm/year, respectively) agree reasonably well with the global trend average of the satellite data (3.09 mm/year). Average trends for the 456 tide gauges are also in good agreement (within 95% confidence limits) with trends based on satellite data within the 1° satellite proximity criterion (3.26 and 3.31 mm/year, respectively). The trends for the 90 gauges with GPS nearby and qualifying satellite locations are 2.68 and 2.74 mm/year, respectively. For all datasets analyzed, the accelerations are quite strongly negative but the uncertainty is relatively large. Adjustment of the tide gauge trends for spatial bias modified both trends and accelerations significantly and decreased trend differences between the 456 and 90 gauge datasets. The spatially adjusted tide gauge trends (2.95 and 2.72 mm/year, respectively for the 456 and 90 tide gauges sets) are somewhat less than the 1° spatially adjusted satellite data (3.09 mm/year). Whether the increased sea level trend of approximately 3 mm/year measured by the satellites since the 1990's is a long-term increase from the 20th Century value of approximately 1.7 mm/year or part of a cycle will require longer records; however, the negative accelerations support some cyclic character.  相似文献   

16.
In this paper , we present a novel Kalman filter approach to combine a hydrodynamic model-derived lowest astronomical tide (LAT) surface with tide gauge record-derived LAT values. In the approach, tidal water levels are assimilated into the model. As such, the combination is guided by the model physics. When validating the obtained “Kalman-filtered LAT realization” at all tide gauges, we obtained an overall root-mean-square (RMS) difference of 15.1 cm. At the tide gauges not used in the data assimilation, the RMS is 17.9 cm. We found that the assimilation reduces the overall RMS difference by ~ 31% and ~ 22%, respectively. In the Dutch North Sea and Wadden Sea, the RMS differences are 6.6 and 14.8 cm (all tide gauges), respectively. Furthermore, we address the problem of LAT realization in intertidal waters where LAT is not defined. We propose to replace LAT by pseudo-LAT, which we suggest to realize similarly as LAT except that all water level boundary conditions and assimilated tidal water levels have to be enlarged by a constant value that is removed afterward. Using this approach, we obtained a smooth reference surface for the Dutch Wadden Sea that fits LAT at the North Sea boundary within a few centimeters.  相似文献   

17.
Changes in the height of the ocean can be described through the relative and absolute sea level changes depending on the geodetic reference the sea level records are related to. Satellite altimetry provides absolute sea level (ASL) measurements related to the global geodetic reference, whereas tide gauges provide relative sea level (RSL) measurements related to the adjacent land. This study aims at computing the ASL surfaces for different time epochs from combined satellite altimeter and tide gauge records. A method of sea level data fusion is proposed to enable modeling of the impact of present and future sea level changes on the coast. Sea surface modeling was investigated for ten different gridding methods commonly used for the interpolation of altimeter data over the open ocean and extrapolation over the coastal zones. The performance of gridding methods was assessed based on the comparison of the gridded altimeter data and corrected tide gauge measurements. Finally, the sea level surfaces related to the GRS80 global reference ellipsoid were computed for the Mediterranean Sea over the altimeter period. In addition, the current sea level trends were estimated from both sea level measurements.  相似文献   

18.
《Ocean Modelling》2010,34(3-4):270-282
A set of tools for the statistical assessment of ocean observing networks is presented and applied for the analysis of different instrumentation scenarios in the German Bight. An optimal linear estimator is used to re-construct ocean state parameters from observations taking into account both the prior distribution of the state and measurement errors. The proposed method enables a re-construction of any scalar parameter or vector field with linear relationship to the state. The performance of the observing network is quantified in terms of the re-construction quality. Apart from the capability of the network to provide estimates of state parameters at the time of the observations, the potential of the measurements for forecasts is investigated as well. Furthermore, a generic method to compare single measurements with continuous observations is presented. Finally, a technique is described to quantify the relative importance of different components of an observational network.The proposed methods are applied to water level measurements in the German Bight. A numerical model is used to estimate the background statistics. Synthetic measurements provided by tide gauges, satellite altimeters, and HF radar are considered in the analysis. The estimation of the complete water level field in the German Bight is compared for altimeter and tide gauge measurements. It is shown that the orientation of the satellite track with respect to the coastline is of high relevance. The importance of water level measurements taken in deeper water, e.g., at the FINO-1 platform, is demonstrated. It is shown that continuous tide gauge measurements provide more information on the area mean water level in the German Bight than altimeter observations taken by ENVISAT and JASON-1/2. It is furthermore shown how the information provided by a tide gauge propagates with the Kelvin wave. Implications for the design of an assimilation scheme are discussed.  相似文献   

19.
利用中国沿岸验潮站GNSS和邻近地区陆态网络GNSS基准站观测数据,结合卫星高度计和验潮站海平面观测数据分析了中国沿海验潮站及其邻近地区陆地垂直运动特征。中国沿海海平面观测以及验潮站和陆态网GNSS基准站观测结果显示,中国沿海省区市及沿海验潮站陆地垂直运动总体表现为:辽宁至江苏沿海上升、上海至福建泉州沿海沉降、福建厦门至广西沿海升降交替的格局,局部滨海平原地区如华北平原天津南部、河北平原的沧县则表现出显著的沉降特征。验潮站陆地的抬升与沉降是沿海相对海平面变化的重要组成部分,准确掌握验潮站及其邻近区域的陆地垂直运动特征,可为沿海相对海平面变化分析、海平面变化影响评估以及未来海平面上升预测提供依据。  相似文献   

20.
Rabaul tide gauge records from 1968 through 1985 give the amount of vertical movement in the northern part of Rabaul Caldera. Monthly mean sea level data were compared with other regional tide gauge stations to remove large scale oceanographic effects. No large vertical movements (> 0.3 cm/yr) were noted in this portion of the caldera. The results of sea level measurements at other points around the caldera, from 1981 through 1983 are consistent with the 1 to 10 cm of uplift observed on Matupit Island from optical leveling surveys. There was relatively little vertical movement (~ 0.1 cm/yr) in the Vulcan area.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号