共查询到20条相似文献，搜索用时 31 毫秒
1.
2.
This study examines the reffection of regular and irregular waves from a partially perforated caisson breakwater located on a step bed. The step bed is treated as an idealized rubble mound foundation. Based on the linear potential theory, an analytical solution is developed to calculate the reffection coefficient of the structure subjected to regular waves. The matched eigenfunction expansion method is used for the solution. The regular wave method is also extended to irregular waves using a linear transfer... 相似文献
3.
The reflection of regular and irregular waves by a partially perforated caisson breakwater on a step bed 总被引：2，自引：0，他引：2
This study examines the reflection of regular and irregular waves from a partially perforated caisson breakwater located on a step bed. The step bed is treated as an idealized rubble mound foundation. Based on the linear potential theory, an analytical solution is developed to calculate the reflection coefficient of the structure subjected to regular waves. The matched eigenfunction expansion method is used for the solution. The regular wave method is also extended to irregular waves using a linear transfer function. The calculated results obtained for limiting cases are exactly the same as corresponding results given by the previous researchers. The present predictions also agree well with experimental data in the published literatures. Numerical experiments are conducted to examine the variations of the reflection coefficient versus its main effect factors, and some interesting results are presented. 相似文献
4.
5.
6.
结合工程实例,介绍了座床式圆筒码头基床整平所采用的"下直钢轨与刮道结合进行园环形基床整平"方案及其实施步骤,实验结果表明,该技术方案具有整平面积小、效率高、成本低等优点,为圆筒机床水下施工提供了重要科学依据。 相似文献
7.
Most previous investigations related to composite breakwaters have focused on the wave forces acting on the structure itself from a hydrodynamic aspect. The foundational aspects of a composite breakwater under wave-induced cyclic loading are also important in studying the stability of a composite breakwater. In this study, numerical simulations were performed to investigate the wave-induced pore water pressure and flow changes inside the rubble mound of the composite breakwater and seabed foundation. The validity and applicability of the numerical model were demonstrated by comparing numerical results with existing experimental data. Moreover, the present model clearly has shown that the instantaneous directions of pore water flow motion inside the seabed induced by surface waves are in good agreement with the general wave-induced pore water flow inside the seabed. The model is further used to discuss the stability of a composite breakwater, i.e., the interaction among nonlinear waves, composite breakwater and seabed. Numerical results suggest that the stability of a composite breakwater is affected by not only downward shear flow generating on the seaward slope face of the rubble mound but, also, a high and dense pore water pressure gradient inside the rubble mound and seabed foundation. 相似文献
8.
1 .IntroductionWavereflectionfromstructuresisanimportantfactorforthedesignofthestructures .Therehavebeenmanyresearchesonwavereflectionwithregularwavesandmonochromaticirregularwaves .Miche( 1 951 )proposedanon dimensionalMichenumberMfornormallyincidentirregularwavesconsideringwavebreakingbecauseofthedeepeningofwavesteepnessontheslopeofbreakwaters .ThereflectioncoefficientisproportionaltoM ,i.e .,Kr ∝M =4g( 2π) 5/ 2tan5/ 2 α(Hsf2p) ( 1 )wheregisthegravitationalacceleration ,Hsthesignifican… 相似文献
9.
Chai Changqing Chief Engineer First Navigational Engineering Bureau Ministry of Communications of China Jianjin 《中国海洋工程》1994,(1)
-The construction of breakwaters in China in more than 40 years since the founding of the People's Republic of China is reviewed. The construction of two main types of breakwater, upright breakwaters and rubble mound breakwaters, and the way in which they are built are expounded. Recommendations to improve the technology for future breakwater construction are presented. 相似文献
10.
Sun Jingshi Zhu Yiming
Research Professor Tianjin Research Institute of Water Transport Engineering Tianjin
Associate Professor Dalian Aquatic Product Institute Dalian 《中国海洋工程》1995,(1)
Through hydraulic model experiment and site investigation, this paper has derived a calculation formula of dry-laid stone armour layer thickness of rubble mound breakwaters for fishery harbours. The influences of the friction force between stone blocks and the variations of wave length or period and water depth are considered in the formula. The calculated results of several existing structures are in good agreement with field data. This formula is more practical than those ever published both at home and abroad, and has been adoptted by the technical standards of aquatic projects published by the Ministry of Agriculture of China. It is applicable for the calculation of dry-laid stone armour layer of breakwater for small- or medium-size harbours. 相似文献
11.
Analytical models for predicting wave reflection from a perforated-wall caisson breakwater have been developed. Most of the existing models deal with the case in which the waves are normally incident to the caisson lying on a flat sea bottom. In the present paper, using the Galerkin-eigenfunction method, an analytical model is developed that can predict the reflection coefficient of a perforatedwall caisson mounted on a rubble mound foundation when waves are obliquely incident to the breakwater at an arbitrary angle. The developed model is compared with other theoretical results and hydraulic experimental data. 相似文献
12.
Rubble mound breakwaters usually consist of armour, filter and core layers. The units used in the armour layer are natural rock or concrete. Although natural rock is usually preferred, it is not always possible to apply it. There are some advantages to using concrete units: they have a high stability coefficient under wave attack, and they are easily produced at work sites. Tetrapod and cube blocks are widely used in breakwaters as armour units.Rubble mound breakwaters are subjected not only to wave activity but also other types of environmental loading, such as earthquakes. Although rubble-mound breakwaters are most likely the most common type of breakwaters, they have received little attention regarding their response to seismic activity. The objective of this study is to present the dynamic response of a breakwater armoured by tetrapods placed by two different placement methods and armoured by cubes during seismic loadings experimentally and numerically. A shaking tank was developed for the experimental study. The breakwater models sit on a rigid bed, and the model scale is 1/50. A one-dimensional shaking tank was used to understand simple responses of the rubble mound breakwaters under seismic loads. The tank allows only one degree of freedom. A raining crane system was developed to achieve the same packing density and porosity for the core material. The shape of the model breakwater before and after the tests was measured using a profiler and was recorded by computer. However, crest lowering and the level of damage on slopes were determined from profiler records. The dynamic responses of the model breakwaters were also investigated using an image processing technique. For numerical simulation, software using finite element method was used.The results obtained from the experiment and numerical model may help designers build breakwaters armoured by artificial units. 相似文献
13.
This paper presents safety evaluations of jetties found on soft clays at Huanghua Port to protect the channel from deposition due to long shore transport. It is likely to be the most critical for the jetties during construction, as far as excess pore water pressure and its effects on the embankment stability are concerned. A rubble mound jetty and a caisson jetty are considered as design alternatives for comparison. Finite element analysis and limit equilibrium analysis are carried out to evaluate the stability of the jetties during construction. For the rubble mound jetty, effective stresses in the soft clays are calculated associated with consolidation, so as to estimate the shear strength increased thereby. With the effective stresses and shear strength, the critical situation of the rubble mound jetty is revealed by the limit equilibrium analysis. For the caisson jetty, wave action is concerned, which is transformed into distributed forces on the caisson. Both the finite element analysis and the limit equilibrium analysis indicate a potential general shear failure of the caisson jetty and the foundation. 相似文献
14.
Stability formulae for armour layers of rubble mound breakwaters are usually being applied assuming perpendicular wave attack. Often the effects of oblique waves are neglected. This is however a conservative assumption since the stability of armour slopes generally increases for oblique waves. New wave basin tests have been performed to assess the effects of oblique waves on the stability of rock slopes and the stability of cube armoured rubble mound breakwaters. The physical model tests were focussed on wave directions between perpendicular (0°) and parallel (90°). The test programme included tests with long-crested waves and tests with short-crested waves. The results show that for rock slopes the influence of oblique waves is larger for long-crested waves. Based on the test results a design guideline is provided to account for effects of oblique waves on the stability of rock slopes, armour layers with a double layer of cubes, and armour layers with a single layer of cubes. 相似文献
15.
Ｉｒｒｅｇｕｌａｒｗａｖｅ－ｉｎｄｕｃｅｄｓｅｅｐａｇｅａｃｔｉｏｎｏｎｃｙｌｉｎｄｅｒｓｒｅｓｔｉｎｇｏｎｒｕｂｂｌｅｍｏｕｎｄｆｏｕｎｄａｔｉｏｎ￥ＱｉｕＤａｈｏｎｇａｎｄＹａｎｇＧａｎｇ（ＤｅｐａｒｔｍｅｎｔｏｆＣｉｖｉｌＥｎｇｉｎｅｅｒｉｎｇ... 相似文献
16.
Based on the open source code OpenFOAM,a three-dimensional model is presented for simulation of the interaction between waves and rubble mound breakwater with armor units.The armor units with their real geometries are depicted through computational grids.The volume-averaged RANS equation and the seepage equation containing nonlinear term are used to describe the percolation in the core and underlayer of the breakwater.Grids independence analysis are carried out,the horizontal and vertical grid size are recommended to take as one-fifteenth of the mean nominal diameter D50 of the armor units and one-fifteenth of the wave height respectively.Random wave overtopping of rubble mound breakwater with armor units is simulated through the proposed model.The results show good agreement between the simulated and measured overtopping discharge rates for different types of armor units.The developed numerical model can be used to evaluate the random wave overtopping in design of rubble mound breakwater with artificial armor blocs. 相似文献
17.
18.
为了研究海底防沉板—桩复合基础在地震荷载作用下的动力反应特性,以我国南海深水工程实例为研究对象,利用Flac3D有限差分仿真软件建立了计算模型,土体采用Mohr-Coulomb本构模型,模型底部输入EL Centro地震波,对不同桩长的复合基础进行分析计算.在该特定工程背景下,研究结果表明:随着桩长的增加,防沉板顶部加速度放大系数呈减小趋势;地震荷载下,复合基础发生震陷,沉降量在地震波加速度峰值过后趋于稳定;当桩长为6m时,复合基础的水平振动程度和震陷量最小;由于桩基础把震动能量传输到深部土层中,复合基础周围土体的加速度响应值小于远场土体.在动力时域内,防沉板与桩连接处弯矩最大,需要在此处增设加固装置. 相似文献
19.