共查询到19条相似文献，搜索用时 109 毫秒
1.
重力垂直梯度异常反应了重力异常的空间变化率,在地球物理勘探等多学科中得到越来越多的应用。利用南海局部区域实测重力异常数据和Sandwell测高重力异常数据,将搜索范围、距离和精度多种因素融合考虑并对Shepard算法进行改进,给出了南海局部区域(19°N~20.5°N,114°E~115.5°E)分辨率1'×1'的重力异常并反演了对应分辨率的重力垂直梯度异常。结果表明,基于Shepard改进算法的高精度船测重力和测高重力的有机融合,增强了单一测高重力数据反演重力垂直梯度异常的细节纹理,提高了反演重力垂直梯度异常的分辨率和精度。 相似文献
2.
3.
卫星测高在确定地球重力场中的应用 总被引：2，自引：1，他引：2
根据测高所得的几何量与地球重力场物理量之间的关系，探讨了卫星测高数据在确定地球重力场参数中的应用，主要包括利用卫星测高数据确定海洋大地水准面、确定海洋重力异常和改善地球重力场模型。 相似文献
4.
5.
6.
随着测高技术的不断发展,测高海洋重力场的精度不断提高,由其反演计算的海底地形精度也相应提高。利用Sandwell 2014年最新发布主要由Jason-1末期大地测量任务和Cryosat-2观测资料反演的测高重力场V23.1,采用重力地质法(GGM)反演了中国南海海域海底地形模型,并对结果进行了精度评价。该过程中首先直接计算一系列密度差下的反演结果,并通过船测数据检核选定优化的密度差范围,然后利用向下延拓的方法确定了最优密度差异常数为7g/cm3。与船测水深数据相比,反演得到的GGM模型与检核点船测水深数据差值的标准差达到了±70.32m;此外,还计算了由测高重力异常V15.2反演的海底模型,比较这两个模型发现:测高重力场短波部分的改善对海底地形反演精度的提升作用有限,为得到更高精度的海底地形模型,需引入短波更为敏感的重力梯度资料。 相似文献
7.
粗差探测是评价船载重力测量数据成果质量的重要内容。卫星测高反演重力场技术提供了海域全覆盖的重力场数值模型,其精度水平已满足探测船载重力测量数据粗差的精度要求。以卫星测高反演重力场模型为基础,提出了基于窗口移动中误差模型探测船载重力测量粗差的数据处理方法,其基本思路是:以卫星测高反演重力场数值模型作为背景场,计算船载重力测点处的测高重力值的差值,以差值作为输入量,等权构建中误差背景场,以开窗中误差背景场作为参考,按照平差思想探测船载重力测量数据的粗差。实验结果表明,依据本文方法能有效探测船载重力测量数据的粗差。 相似文献
8.
利用多代卫星测高数据计算中国近海及邻域重力异常 总被引：1，自引：0，他引：1
为提高海洋重力场数据的精度和空间分辨率,联合Jason-1/2、T/P、Envisat、ERS-1/2、Geosat等多代卫星测高数据计算中国近海及邻域(0°~42°N,100°~140°E)2′×2′重力异常。对卫星测高数据分别进行共线处理和自交叉点平差,并以T/P卫星测高数据为基准进行多星数据联合平差,有效削弱了卫星测高数据的时变影响和不协调性;利用逆Vening-Meinesz公式计算重力异常,与船测重力相比,均方根误差为5.4 mgal。结果表明,通过引入高精度的卫星测高数据,结合多项平差处理手段,提高了海洋重力异常的计算精度。 相似文献
9.
海底地形对开展海洋科学调查和研究十分重要。以多波束为主的回声测深技术测量成本高且效率低,几十年来仅实现了全球约20%的海床测绘。对于空白区（特别是深海区域）,可以借助重力异常和重力垂直梯度异常进行回归分析反演得到,但该方法得到的比例因子鲁棒性不强。为了解决这一问题,同时考虑到两种重力数据在表征海底地形长短波长的不同优势,本文结合滑动窗口赋权和稳健回归分析来反演海底地形。在太平洋皇帝山海域（35°～45°N,165°～175°E）的实验结果表明:在船测检核点处,本文构建模型的标准差为61.02 m,相比于单一重力数据反演模型,精度分别提高了14.92%（重力异常）和2.08%（重力垂直梯度异常）,能较好地反映皇帝海山链的地形走势。 相似文献
10.
随着空间技术的发展 ,卫星测高精度不断提高 ,目前根据卫星测高数据得到的卫星重力异常在海区具有很高的异常分辨率 ,与船测重力资料相比其精度可达到5mGal,这将十分有助于海洋沉积盆地、板块构造及地球动力学的研究。 相似文献
11.
12.
13.
《Marine Geodesy》2012,35(1):63-85
AbstractWe introduce an iterative inversion method to address the problems in high-order seafloor topography inversion using gravity data (gravity anomaly and vertical gravity gradient anomaly), such as the difficulty in computing the equation and the uniqueness of the calculation results. A part of the South China Sea is selected as the experimental area. Considering the coherence and admittance function of gravity topography and vertical gravity gradient topography, the inversion band of the gravity anomaly and vertical gravity gradient anomaly in the study area is 30?km–120?km. Seafloor topography models of different orders are constructed using an iterative method, and the performance of each seafloor topography model is analyzed against ETOPO1 and other seafloor topography models. The experimental results show that as the inversion order increases, the clarity and richness of seafloor topographic expression continuously improve. However, the accuracy of seafloor topography inversion does not improve significantly when the inversion order exceeds a certain value, which is related to the contribution of high-order seafloor topography to gravity information. The results show that the accuracy of BGT4 (inversion model constructed by the gravity anomaly) is slightly poorer than that of BVGGT4 (inversion model constructed by the vertical gravity gradient anomaly) in areas with complex topography, such as multi-seamounts and trenches, and the results are generally better in areas with flat seafloor topography. 相似文献
14.
15.
Deflections of the vertical (DOVs) over oceans cannot be directly measured, which restricts their applications. A local covariance function of anomalous potential is put forward in this paper in conjunction with the least-squares collocation (LSC) method to compute the oceanic DOVs utilization of oceanic gravity data along a profile. The covariance functions of gravity field quantities have been derived directly as functions of x, y and z without the need to introduce coordinate transformations corresponding to along- or cross-profile components. In the proposed methodology, gravity data along a profile were used to calculate the residual gravity anomaly using the remove-compute-restore technique. The residual gravity anomaly was used to calculate the parameters of the proposed covariance function of the local anomalous gravity field, which was used in the LSC to compute the residual DOVs along the profile. The residual DOVs added model DOVs to recover the DOVs along the profile. The results of a simulation experiment prove that the proposed methodology is feasible and effective. 相似文献
16.
利用卫星测高技术确定海洋重力场,垂线偏差数据作为导出观测量在实际工作中被普遍采用。利用物理大地测量边值问题的定义以及扰动位在球面边界条件下的解,给出了由垂线偏差计算大地水准面高、重力异常和扰动重力的公式。分析了不同积分计算公式在重力场阶谱表达形式下对垂线偏差误差的抑制作用,也分析了不同积分核函数的变化特性,得出基本结论:在利用卫星测高数据求解海洋重力场时,当以格网化海面垂线偏差数据计算重力场参数时,求解的大地水准面高的有效性和稳定性优于重力异常和扰动重力。 相似文献
17.
18.
卫星测高中的垂线偏差法 总被引：6，自引：0，他引：6
卫星测高中的垂线偏差法是当前利用卫星测高技术研究海洋重力场的最优方法，包括利用卫星测高数据计算垂线偏差和利用该垂线偏差确定海洋重力场两部分。研究了Sandwell、Olgiafi、Hwang测高垂线偏差的计算方法和Molodenskii、Hwang利用测高垂线偏差确定海洋重力场的基本原理，分析比较了上述方法的异同，为科学地利用卫星测高资料反演海洋重力场提供理论依据。 相似文献
19.
Sean L. Bruinsma Christoph Förste Sandrine Mulet Marie-Hélène Rio Oleg Abrikosov Jean-Charles Marty 《Marine Geodesy》2016,39(3-4):238-255
The impact of GOCE Satellite Gravity Gradiometer data on gravity field models was tested. All models were constructed with the same Laser Geodynamics Satellite (LAGEOS) and Gravity Recovery and Climate Experiment (GRACE) data, which were combined with one or two of the diagonal gravity gradient components for the entire GOCE mission (November 2009 to October 2013). The Stokes coefficients were estimated by solving large normal equation (NE) systems (i.e., the direct numerical approach). The models were evaluated through comparisons with the European Space Agency's (ESA) gravity field model DIR-R5, by GPS/Leveling, GOCE orbit determination, and geostrophic current evaluations. Among the single gradient models, only the model constructed with the vertical ZZ gradients gave good results that were in agreement with the formal errors. The model based only on XX gradients is the least accurate. The orbit results for all models are very close and confirm this finding. All models constructed with two diagonal gradient components are more accurate than the ZZ-only model due to doubling the amount of data and having two complementary observation directions. This translates also to a slower increase of model errors with spatial resolution. The different evaluation methods cannot unambiguously identify the most accurate two-component model. They do not always agree, emphasizing the importance of evaluating models using many different methods. The XZ gravity gradient gives a small positive contribution to model accuracy. 相似文献