首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到17条相似文献，搜索用时 93 毫秒
1.
The orthogonal supersegment of the ultraslow-spreading Southwest Indian Ridge at 16°–25°E is characterized by significant along-axis variations of mantle potential temperature. A detailed analysis of multibeam bathymetry,gravity, and magnetic data were performed to investigate its variations in magma supply and crustal accretion process. The results revealed distinct across-axis variations of magma supply. Specifically, the regionally averaged crustal thickness reduced systematically from around 7 Ma to the present, indicating a regionally decreasing magma supply. The crustal structure is asymmetric in regional scale between the conjugate ridge flanks, with the faster-spreading southern flank showing thinner crust and greater degree of tectonic extension. Geodynamic models of mantle melting suggested that the observed variations in axial crustal thickness and major element geochemistry can be adequately explained by an eastward decrease in mantle potential temperature of about40°C beneath the ridge axis. In this work, a synthesized model was proposed to explain the axial variations of magma supply and ridge segmentation stabilities. The existence of large ridge-axis offsets may play important roles in controlling melt supply. Several large ridge-axis offsets in the eastern section(21°–25°E) caused sustained along-axis focusing of magma supply at the centers of eastern ridge segments, enabling quasi-stable segmentation. In contrast, the western section(16°–21°E), which lacks large ridge-axis offsets, is associated with unstable segmentation patterns.  相似文献   

2.
Large-scale detachment faults on mid-ocean ridges （MORs） provide a window into the deeper earth. They have megamullion on their corrugated surfaces, with exposed lower crustal and upper mantle rocks, rela- tively high residual Bouguer gravity anomaly and P-wave velocity, and are commonly associated with ocean- ic core complex. According to 30 detachment faults identified on MORs, we found that their distances to the axis mostly range from 5 to 50 km, half-spreading rates range from 6.8 to 17 mm/a, and activity time ranges from recent to 3 Ma. Most of the detachment faults are developed on the slow spreading Mid-Atlantic Ridge （MAR） and ultra-slow spreading Southwest Indian Ridge （SWIRl, with the dominant half-spreading rates of 7-13 mm/a, especially 10-13 mm/a. Furthermore, they mostly occur at the inside corner of one segment end and result in an asymmetric seafloor spreading. The detachment faults on MORs are mainly controlled by the tectonism and influenced by the magmatism. Long-lived detachment faults tend to be formed where the ridge magma supply is at a moderate level, although the tectonism is a first-order controlling factor. At the slow spreading ridges, detachment faults tend to occur where local magma supply is relatively low, whilst at the ultra-slow spreading ridges, they normally occur where local magma supply is relatively high. These faults are accompanied by hydrothermal activities, with their relationships being useful in the study of hydrothermal polymetallic sulfides and their origin.  相似文献   

3.
The ridge like seafloor highs with various geological origins can be classed into mid-ocean ridges,transverse ridges related to transform faults,hot spot/mantle plume originated ridges,microcontinent rifted from major continent,intra-plate arc formed by interaction of two oceanic plates,and tectonic ridges uplifted by later tectonic activity.Those ridges moved towards the convergent continental margins along with the underlain plate drifting and formed so-called accreted ridges commonly trending at a high angle to the continental margins.At divergent continental margins,the continental crusts were extended and thinned accompanying with magmatism,which formed high terrains protruding or parallel to the coastal line.The ridges worldwide have various origins and the crustal thicknesses and structures of them are diversity.The crusts beneath the microcontinents,and the transverse ridges along the transform margin,and the seafloor highs beside the passive continental margins are continental,while the crusts of other ridges are oceanic.Article 76 of the United Nations Convention on the Law of the Sea (UNCLOS) has classed the seafloor highs worldwide into three legal categories,namely oceanic ridges,submarine ridges and submarine elevations,for the purpose to delineate the outer limit of the coastal States’ continental shelf beyond 200 nautical miles.To define the categories of the legal seafloor highs to which the ridges with various geological origins belong,the continuities in morphology and geology including the rock types,crustal structures,origins and tectonic setting of the ridges and the coastal States’ land mass with its submerged prolongation should be taken into account.If a ridge is continuous both in morphology and geology with the coastal States’ land mass and its submerged prolongation,it is a submarine elevation stipulated in Article 76.If it is discontinuous in morphology,the ridge should be regarded as oceanic ridges.If a ridge is continuous in morphology but discontinuous in geology with the coastal States’ land mass and its submerged prolongation,then it is a submarine ridge as stipulated in Article 76.  相似文献   

4.
白垩纪以来太平洋上地幔组成和温度变化   总被引：1，自引：0，他引：1  
The geological evolution of the Earth during the mid-Cretaceous were shown to be anomalous, e.g., the pause of the geomagnetic field, the global sea level rise, and increased intra-plate volcanic activities, which could be attributed to deep mantle processes. As the anomalous volcanic activities occurred mainly in the Cretaceous Pacific, here we use basalt chemical compositions from the oceanic drilling(DSDP/ODP/IODP) sites to investigate their mantle sources and melting conditions. Based on locations relative to the Pacific plateaus, we classified these sites as oceanic plateau basalts, normal mid-ocean ridge basalts, and near-plateau seafloor basalts. This study shows that those normal mid-ocean ridge basalts formed during mid-Cretaceous are broadly similar in average Na8, La/Sm and Sm/Yb ratios and Sr-Nd isotopic compositions to modern Pacific spreading ridge(the East Pacific Rise). The Ontong Java plateau(125–90 Ma) basalts have distinctly lower Na8 and143Nd/144 Nd, and higher La/Sm and 87Sr/86 Sr than normal seafloor basalts, whereas those for the near-plateau seafloor basalts are similar to the plateau basalts, indicating influences from the Ontong Java mantle source. The super mantle plume activity that might have formed the Ontong Java plateau influenced the mantle source of the simultaneously formed large areas of seafloor basalts. Based on the chemical data from normal seafloor basalts, I propose that the mantle compositions and melting conditions of the normal mid-ocean ridges during the Cretaceous are similar to the fast spreading East Pacific Rise. Slight variations of mid-Cretaceous normal seafloor basalts in melting conditions could be related to the local mantle source and spreading rate.  相似文献   

5.
北冰洋Gakkel洋中脊的地幔熔融控制因素及非岩浆地壳增生   总被引：3，自引：0，他引：3  
Spreading rate is a primary factor of mantle melting and tectonic behavior of the global mid-ocean ridges. The spreading rate of the Gakkel ridge decreases gradually from west to east. However, the Gakkel ridge can be divided into four thick-and-thin zones with varying crustal thicknesses along ridge axis. This phenomenon indicates that mantle melting of the Gakkel ridge is not a simple function of spreading rate. Mantle temperature, water content,mantle composition, and other factors are important in crustal accretion processes. Based on gravity-derived crustal thickness and wet melting model, we estimate that the mantle potential temperatures of the four zones are1 270, 1 220, 1 280, and 1 280°C(assuming that mantle water content equals to global average value), with corresponding mantle water contents of 210, 0, 340, and 280 mg/kg(assuming that mantle potential temperature is 1 260°C), respectivly. The western thinned crust zone is best modeled with low mantle temperature, whereas the other zones are mainly controlled by the enhanced conduction caused by the slower spreading rate. Along the Gakkel ridge, the crustal thickness is consistent with rock samples types. Predominated serpentinized peridotite and basalt are found in the area with crustal thickness 1.5 km and 2.5 km, respectively. The rock samples are including from basalt to peridotite in the area with crustal thickness between 1.5 and 2.5 km. Based on this consistency, the traditional magmatic accretion zone accounted for only 44% and amagmatic accretion accounted for 29% of the Gakkel ridge. The amagmatic accretion is a significant characteristic of the ultra-slow spreading ridge.  相似文献   

6.
Study of petrophysical properties of rocks in seafioor hydrothermal fields has great significance for inves- tigation of seafloor hydrothermal activities, especially for polymetallic sulfides prospecting. In the present study, based on the current experimental conditions, we conducted systematic experiments to measure the magnetic susceptibility, electrical resistivity, porosity, density, as well as acoustic wave velocity of seafloor rocks and sulfides. Subsequently, we measured the physical characteristics of hydrothermal sulfides, basalts and peridotites which were collected from newly discovered seafloor hydrothermal fields at 49.6°E, 50.5°E, 5 1°E, 63.5°E, and 63.9°E of the Southwest Indian Ridge （SWIR）. Previously available and newly collected data were combined to characterize the physical differences between polymetallic sulfides and rocks. We also discussed the impact of hydrothermal alteration on the bedrock and demonstrated how these petrophysical properties of rocks can help in geophysical prospecting of seafloor hydrothermal fields as indicators.  相似文献   

7.
Some of the islets in the eastern Beibu Gulf are covered by Quaternary volcano strata. The rock samples from these islets mainly consist of quartz tholeiites （at Shenjiandao）, olivine tholeiites （at Linshidao and Xieyang- dao） and alkali basalts （at Yangpubi and Jianshidao）, and basically represent four periods of the Quaternary volcanism of Hainan Island and its adjacent regions. Except for the samples from Shenjiandao, most of the Quaternary volcanics of these islets belong to alkali magma series. The trace element characteristics of all of these samples show they are OIB （oceanic island basalt） -like, which implies that their deep geodynamic setting may be related to a mantle plume. The Sr-Nd-Pb isotopic compositions show that the mantle source beneath the Quaternary strata can be regarded as a result of binary mixing between a depleted, DMM （de- pleted MORB mantle）-like source and an enriched mantle type 2 （EM2）. The EM2 may be originated from the Hainan mantle plume, and has been metasomatized by carbonaceous fluids released from ancient re- cycled oceanic crust at an asthenospheric mantle level. These features, together with typical trace element ratios, reflect that the parent magma was not subjected to crustal contamination during its ascent to the surface. This study provides further petrological and geochemical evidence for the existence of the Hainan mantle plume.  相似文献   

8.
Okinawa Trough is a back-arc, initial marginal sea basin, located behind the Ryukyu Arc–Trench System. The formation and evolution of the Okinawa Trough is intimately related to the subduction process of the Philippine Sea Plate beneath the Eurasian Plate since the late Miocene. The tectonic evolution of the trough is similar to other active back-arcs, such as the Mariana Trough and southern Lau Basin, all of which are experiencing the initial rifting and subsequent spreading process. This study reviews all petrologic and geochemical data of mafic volcanic lavas from the Okinawa Trough, Ryukyu Arc, and Philippine Sea Plate, combined with geophysical data to indicate the relationship between the subduction sources(input) and arc or back-arc magmas(output) in the Philippine Sea Plate–Ryukyu Arc–Okinawa Trough system(PROS). The results obtained showed that several components were variably involved in the petrogenesis of the Okinawa Trough lavas: sub-continental lithospheric mantle underlying the Eurasian Plate, Indian mid-oceanic ridge basalt(MORB)-type mantle, and Pacific MORB-type mantle. The addition of shallow aqueous fluids and deep hydrous melts from subducted components with the characteristics of Indian MORB-type mantle into the mantle source of lavas variably modifies the primitive mantle wedge beneath the Ryukyu and subcontinental lithospheric mantle(SCLM) beneath the Okinawa Trough. In the northeastern end of the trough and arc, instead of Indian MORB-type mantle, Pacific MORB-type mantle dominates the magma source. Along the strike of the Ryukyu Arc and Okinawa Trough, the systematic variations in trace element ratios and isotopic compositions reflect the first-order effect of variable subduction input on the magma source. In general, petrologic data, combined with geophysical data, imply that the Okinawa Trough is experiencing the "seafloor spreading" process in the southwest segment, "rift propagation" process in the middle segment, and "crustal extension" process in the northeast segment, and a nascent ocean basin occurs in the southwest segment.  相似文献   

9.
The morphotectonic features and their evolution of the central Southwest Indian Ridge （SWIR） are dis- cussed on the base of the high-resolution flfll-coverage bathyraetric data on the ridge between 49°-51°E. A comparative analysis of the topographic features of the axial and flank area indicates that the axial topogra- phy is alternated by the ridge and trough with en echelon pattern and evolved under a spatial-temporal mi- gration especially in 49°-50.17°E. It is probably due to the undulation at the top of the mantle asthenosphere, which is propagating with the mantle flow. From 50.17° to 50.7°E, is a topographical high terrain with a crust much thicker than the global average of the oceanic crust thickness. Its origin should be independent of the spreading mechanism of ultra-slow spreading ridges. The large numbers of volcanoes in this area indicate robust magmatic activity and may be related to the Crozet hot spot according to RMBA （residual mantle Bouguer anomaly）. The different geomorphological feature between the north and south flanks of the ridge indicates an asymmetric spreading, and leading to the development of the OCC （oceanic core complex）. The tectonic activity of the south frank is stronger than the north and is favorable to develop the OCC. The first found active hydrothermal vent in the SWIR at 37°47＇S, 49°39＇E is thought to be associated with the detach- ment fault related to the OCC.  相似文献   

10.
Investigations of the diffusion activities both within and outside the seafloor hydrothermal vents, as well as related mineral genesis, have been one of the key focuses of ocean biogeochemistry studies. Many hydrothermal vents are distributed close to the southern Okinawa Trough on the less-than-30-m deep shallow seafloor off Kueishan Tao, northeast of Taiwan Island. Investigations of temperature, pH and Eh at four depths of hydrothermal plume were carried out near Kueishan Tao at the white(24.83°N, 121.96°E) and yellow(24.83°N, 121.96°E) vents. An 87 h of temperature time series observation-undertaken near the white vent showed that tide is the main factor affecting the background environment. Based on the observed data, 3-dimensional sliced diffusion fields were obtained and analyzed. It was concluded that the plume diffused mainly from north to south due to ebb tide. The yellow vent's plume could effect as far as the white vent surface. From the temperature diffusion field, the vortices of the plume were observed. The Eh negative abnormality was a better indicator to search for hydrothermal plumes and locate hydrothermal vents than high temperature and low pH abnormalities.  相似文献   

11.
东南印度洋脊(Southeast Indian Ridge, 简称SEIR)是中速扩张洋中脊, 在其中的108°—134°E区域的全扩张速率为72~76 mm·a -1。但在接近澳大利亚-南极洲不整合带(Australian-Antarctic Discordance, 简称AAD)区内, 海底地貌沿洋中脊的变化强烈, 其变化范围涵盖了从慢速到快速扩张洋中脊上常见的例子, 且出现了明显的地球物理与地球化学异常, 说明洋中脊在AAD区附近的岩浆供应量极不均匀。文章定量分析了高精度多波束测深数据, 计算了洋中脊不同段的地形坡度、断层比例以及平面与剖面的岩浆参数M值, 结合研究区内剩余地幔布格重力异常以及洋中脊轴部地球化学指标Na8.0、Fe8.0等资料, 分析与讨论了研究区的断层构造与岩浆活动特征的关系。研究发现, 东南印度洋脊108°—134°E区域的B区(在AAD区内)及C5段(在AAD区外西侧)发育有大量的海洋核杂岩, 而且B区的海洋核杂岩单体规模更大, 其中最大的位于B3区, 沿洋中脊扩张方向延伸约50km。研究结果首次系统性地显示, 相比东南印度洋的其他区域, B和C5异常区具有偏低的平面与剖面M值、偏高的断层比例、偏正的地幔布格重力异常以及偏高的Na8.0值与偏低的Fe8.0值, 这些异常特征可能反映了B区和C5段的岩浆初始熔融深度较浅以及岩浆熔融程度较低, 因此导致其岩浆供应量异常少, 形成较薄的地壳。研究结果同时表明, 在岩浆供应量极少的洋中脊, 构造伸展作用有利于海洋核杂岩的发育, 导致地壳进一步减薄。  相似文献   

12.
To decipher the distribution of mass anomalies near the earth's surface and their relation to the major tectonic elements of a spreading plate boundary, we have analyzed shipboard gravity data in the vicinity of the southern Mid-Atlantic Ridge at 31–34.5° S. The area of study covers six ridge segments, two major transforms, the Cox and Meteor, and three small offsets or discordant zones. One of these small offsets is an elongate, deep basin at 33.5° S that strikes at about 45° to the adjoining ridge axes.By subtracting from the free-air anomaly the three-dimensional (3-D) effects of the seafloor topography and Moho relief, assuming constant densities of the crust and mantle and constant crustal thickness, we generate the mantle Bouguer anomaly. The mantle Bouguer anomaly is caused by variations in crustal thickness and the temperature and density structure of the mantle. By subtracting from the mantle Bouguer anomaly the effects of the density variations due to the 3-D thermal structure predicted by a simple model of passive flow in the mantle, we calculate the residual gravity anomalies. We interpret residual gravity anomalies in terms of anomalous crustal thickness variations and/or mantle thermal structures that are not considered in the forward model. As inferred from the residual map, the deep, major fracture zone valleys and the median, rift valleys are not isostatically compensated by thin crust. Thin crust may be associated with the broad, inactive segment of the Meteor fracture zone but is not clearly detected in the narrow, active transform zone. On the other hand, the presence of high residual anomalies along the relict trace of the oblique offset at 33.5° S suggests that thin crust may have been generated at an oblique spreading center which has experienced a restricted magma supply. The two smaller offsets at 31.3° S and 32.5° S also show residual anomalies suggesting thin crust but the anomalies are less pronounced than that at the 33.5° S oblique offset. There is a distinct, circular-shaped mantle Bouguer low centered on the shallowest portion of the ridge segment at about 33° S, which may represent upwelling in the form of a mantle plume beneath this ridge, or the progressive, along-axis crustal thinning caused by a centered, localized magma supply zone. Both mantle Bouguer and residual anomalies show a distinct, local low to the west of the ridge south of the 33.5° S oblique offset and relatively high values at and to the east of this ridge segment. We interpret this pattern as an indication that the upwelling center in the mantle for this ridge is off-axis to the west of the ridge.  相似文献   

13.
The Australian-Antarctic Discordance (AAD) is an anomalously deep and rugged zone of the Southeast Indian Ridge (SEIR) between 120° E and 128° E. The AAD contains the boundary between the Indian Ocean and Pacific Ocean isotopic provinces. We have analyzed SeaMarc II bathymetric and sidescan sonar data along the SEIR between 123° E and 128° E. The spreading center in the AAD, previously known to be divided into several transform-bounded sections, is further segmented by nontransform discontinuities which separate distinct spreading cells. Near the transform which bounds the AAD to the east, there is a marked change in the morphology of the spreading center, as well as in virtually every measured geochemical parameter. The spreading axis within the Discordance lies in a prominent rift valley similar to that observed along the Mid-Atlantic Ridge, although the full spreading rate within the AAD is somewhat faster than that of slow-spreading centers (~ 74 mm a–1 vs. 0–40 mm a–1). The AAD rift valleys show a marked contrast with the axial high that characterizes the SEIR east of the AAD. This change in axial morphology is coincident with a large (~ 1 km) deepening of the spreading axis. The segmentation characteristics of the AAD are analogous to those of the slow-spreading Mid-Atlantic Ridge, as opposed to the SEIR east of the AAD, which exhibits segmentation characteristics typical of fast-spreading centers. Thus, the spreading center within and east of the AAD contains much of the range of global variability in accretionary processes, yet it is a region free from spreading rate variations and the volumetric and chemical influences of hotspots. We suggest that the axial morphology and segmentation characteristics of the AAD spreading centers are the result of the presence of cooler than normal mantle. The presence of a cool mantle and the subsequent diminution of magma supply at a constant spreading rate may engender the creation of anomalously thick brittle lithosphere within the AAD, a condition which favor, the creation of an axial rift valley and of thin oceanic crust, in agreement with petrologic studies. The morphologies of transform and non-transform discontinuities within the Discordance also possess characteristics consistent with the creation of anomalously thick lithosphere in the region. The upper mantle viscosity structure which results from lower mantle temperatures and melt production rates may account for the similarity in segmentation characteristics between the AAD and slow-spreading centers. The section of the AAD which overlies the isotopic boundary is associated with chaotic seafloor which may be caused by an erratic pattern of magmatism and/or complex deformation associated with mantle convergence. Finally, the pattern of abyssal hill terrain within a portion of the AAD supports previous models for the formation of abyssal hills at intermediate- and slow-spreading ridges, and provides insights into how asymmetric spreading is achieved in this region.  相似文献   

14.
The ridge located between 31° S and 34°30′S is spreading at a rate of 35 mm yr−1, a transitional velocity between the very slow (≤20 mm yr−1) opening rates of the North Atlantic and Southwest Indian Oceans, and the intermediate rates (60 mm yr−1) of the northern limb of the East Pacific Rise, and the Galapagos and Juan de Fuca Ridges. A synthesis of multi-narrow beam, magnetics and gravity data document that in this area the ridge represents a dynamically evolving system. Here the ridge is partitioned into an ensemble of six distinct segments of variable lengths (12 to 100 km) by two transform faults (first-order discontinuities) and three small offset (< 30 km) discontinuities (second-order discontinuities) that behave non-rigidly creating complex and heterogeneous morphotectonic patterns that are not parallel to flow lines. The offset magnitudes of both the first and second-order discontinuities change in response to differential asymmetric spreading. In addition, along the fossil trace of second-order discontinuities, the lengths of abyssal hills located to either side of a discordant zone are observed to lengthen and shorten creating a saw-toothed pattern. Although the spreading rate remains the same along the length of the ridge studied, the morphology of the spreading segments varies from a deep median valley with characteristics analogous to the rift segments of the North Atlantic to a gently rifted axial bulge that is indistinguishable from the shape and relief of the intermediate rate spreading centers of the East Pacific Rise (i.e., 21°N). Like other carefully surveyed ridge segments at slow and fast rates of accretion, the along-axis profiles of each ridge segment are distinctly convex upwards, and exhibit along-strike changes in relief of 500m to 1500 between the shallowest portion of the segment (approximate center) and the segment ends. Such spatial variations create marked along-axis changes in the morphology and relief of each segment. A relatively low mantle Bouguer anomaly is known to be associated with the ridge segment characterized by a gently rifted axial bulge and is interpreted to indicate the presence of focused mantle upwelling (Kuo and Forsyth, 1988). Moreover, the terrain at the ends of each segment are known to be highly magnetized compared to the centers of each segment (Carbotte et al, 1990). Taken together, these data clearly establish that these profound spatial variations in ridge segment properties between adjoining segments, and along and across each segment, indicate that the upper mantle processes responsible for the formation of this contrasting architecture are not solely related to passive upwelling of the asthenosphere beneath the ridge axis. Rather, there must be differences in the thermal and mechanical structure of the crust and upper mantle between and along the ridge segments to explain these spatial variations in axial topography, crustal structure and magnetization. These results are consistent with the results of investigations from other parts of the ridge and suggest that the emplacement of magma is highly focused along segments and positioned beneath the depth minimum of a given segment. The profound differences between segments indicate that the processes governing the behavior of upwelling mantle are decoupled and the variations in the patterns of axis flanking morphology and rate of accretion indicate that processes controlling upwelling and melt production vary markedly in time as well. At this spreading rate and in this area, the accretionary processes are clearly three-dimensional. In addition, the morphology of a ridge segment is not governed so much by opening rate as by the thermal structure of the mantle which underlies the segment.  相似文献   

15.
Many modern seafloor tectonic environments are host to hydrothermal systems and associated polymetallic sulfide deposits. Metal transport and precipitation are controlled by magmatic processes such as pre-eruptive degassing and the hydrothermal cycle. The original availability of Pb and other ore metals in a given setting is dependent on concentrations in the original magmatic source or additional enrichment processes. We have examined the Pb budget of melt inclusions from nine modern seafloor settings representing back-arcs, mid-ocean ridges and seamounts. Melt inclusions provide information on the characteristics of parental magmas, including insights into metal budgets. Trace element data in melt inclusions hosted in plagioclase, olivine and pyroxene were obtained by laser-ablation inductively-coupled mass-spectrometry.Results from back-arcs emphasize the impact of slab-subduction and dehydration processes on the chemical characteristics of generated magmas. Volatile- and fluid-mobile element-rich melt inclusions at Manus basin and Okinawa trough reflect a robust contribution of elements from the subducting slab as evidenced by relatively low Ce/Pb ratios. At Bransfield strait, on the other hand, melt inclusions are volatile poor, and fluid-mobile element ratios are similar to mid-ocean ridge values indicating little or no contribution from the slab. High Cu concentrations at Manus basin and Okinawa trough can be explained by fluxing of ferric iron from the subducting slab benefiting the production of sulfate over sulfide.Metal budgets for seamounts located on and nearby the axis of mid-ocean ridge segments appear to be independent of any input of mantle plume material. Results from the southern Explorer ridge (strong lower mantle influence, transitional- and enriched-MORBs), Pito and Axial seamounts (moderate lower mantle influence, transitional-MORBs) and a Foundation near-ridge seamount (little to no mantle influence, normal-MORB) show that, despite similar tectonic environments and varying contributions of mantle plume material, Cu, Zn and Pb values do not vary significantly between the enriched and non-enriched magma components of a given setting.  相似文献   

16.
Bathmetric highs on the old crust proximal to ridge-transform intersections (RTIs), termed intersection highs, are common but poorly understood features at offsets of fast to intermediate rate spreading centers. We have combined new reflection seismic, photographic, and geochemical data with previously published Seabeam, SeaMARC I, and SeaMARC II data to address the nature of the intersection highs at the Clipperton Fracture Zone. The Clipperton Intersection Highs are both topped by a carapace of young lavas at least 100 m thick. These lavas, which were erupted on the intersection highs, are chemically similar to their adjacent ridge segments and different from the surrounding older crust. At least some of the erupted magma traveled directly from the adjacent ridge at a shallow crustal level. Ridge-related magma covers and intrudes at least the upper 500 m of the transform tectonized crust at the RTI. We suspect that additional magma enters the intersection highs from directly below, without passing through the ridge. The young oceanic crust near the western Clipperton RTI is not thin by regional comparison. The 1.4 m.y. old crust near the eastern Clipperton RTI thickens approaching the transform offset. If the thermal effects of the proximal ridge were negligible, the eastern intersection high crust would appear to be in isostatic equilibrium. We believe that thermal effects are significant, and that the intersection high region stands anomalously shallow for its crustal thickness. This is attributable to increased temperature in the mantle below the ridge-proximal crust. Although ridge magma is injected into the proximal old crust, plate boundary reorganization is not taking place. Intersection high formation has been an ongoing process at both of the Clipperton RTIs for at least the past 1 m.y., during which time the plate boundary configuration has not changed appreciably. We envision a constant interplay between the intruding ridge magma and the disrupting transform fault motion. In addition, we envision a nearly constant input of magma from below the high, as an extension of the magma supply to the ridge from the mantle. Because the proximal ridge profoundly affects the juxtaposed crust at the RTI, sea floor fabric along the aseismic extensions of this fast-slipping transform fault is primarily a record of processes at work at the RTI rather than a record of transform tectonism.  相似文献   

17.
The purpose of our work was to obtain the most possible detailed information about the composition, concentration, and structural features of the magnetic minerals contained in the rock to reveal the differences in the magnetic properties of the peridotites under various circumstances of the mantle magmatism and different conditions of metamorphism. To do this, we examined and analyzed the magnetic and petrographic characteristics of four collections of oceanic and alpinotype spinel peridotites. The main object for comparing the magnetic characteristics was the Gorringe ridge, which lies in the eastern part of the Atlantic Ocean. The peridotite samples from the Gorringe ridge differ from the other collections in many magnetic parameters: I n , χ, Q, I rs /I s , H c , H cr , and H m . The principal question of our work was to clarify the nature of the Earth’s crust where the Gorringe ridge formed. This subject was studied many times in the literature, but the researchers did not reach a common opinion. In accordance with our data, the spinel peridotites from the Gorringe ridge represent a subcontinental lithosphere mantle of the Iberian continental margin. During the metamorphism, the formation of magnetite occurred in the peridotites of the Gorringe ridge in several stages and had a regressive character. Our investigations explain the results of the analysis of the anomalous magnetic field over the Gorringe ridge, which is characterized by sharp roughness and high intensity of the local signchanging anomalies.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号