首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 328 毫秒
1.
The kinematic evolution of the Barinas–Apure Basin and the southern Mérida Andes from Lower Miocene to the Present is numerically modelled using flexural isostatic theory and geophysical and geological data. Two published regional transects are used to build up a reference section, which is then used to constrain important parameters (e.g. shortenings and sedimentary thicknesses) for the flexural modelling. To control the location of the main fault system in the flexural model earthquake information is also used. The estimated flexural elastic thickness of the South American lithosphere beneath the Barinas–Apure Basin and the Mérida Andes Range is 25 km. The value for the final total shortening is 60 km. The flexural isostatic model shows that the Andean uplift has caused the South American lithosphere subsidence and the development of the Barinas–Apure Basin.In addition, gravity modelling was used to understand deep crustal features that could not be predicted by flexural theory. Consequently, the best-fit flexural model is used to build a gravity model across the Mérida Andes and the Barinas–Apure Basin preserving the best-controlled structural features from the flexural modelling (e.g. basin wavelength and depth) and slightly changing the main bodies density values and deep crustal structures. The final gravity model is intended to be representative of the major features affecting the gravity field in the study area. The predicted morphology in the lower crustal level of the final gravity model favours the hypothesis of a present delamination or megathrust of the Maracaibo crust over the South American Shield. This process would use the Conrad discontinuity as a main detachment surface within an incipient NW dipping continental subduction.  相似文献   

2.
The Mérida Glaciation (cf. Wisconsinan, Weichselian) as proposed by Schubert (1974b) culminated at about 18 ka during the last glacial maximum (LGM) and ended at about 13 ka as indicated by 14C dating and correlation with the Cordillera Oriental of Colombia. Moraines of an early stade of Mérida Glaciation reached to 2800 m a.s.l. and were largely overrun or eradicated by the maximum Wisconsinan advance (LGM); where they outcrop, the older moraines are characterized by eroded, weathered glacial diamictons and outwash fans.At Pueblo Llano in the central Mérida Andes (Cordillera de Trujillo), older to younger beds of contorted glacitectonized diamict, overlying beds of bouldery till and indurated outwash, all belong to the early Mérida stade. Overlying the early Mérida stade, deposits of rhythmically bedded glaciolacustrine sediments are in turn overlain with contorted sand and silt beds capped with outwash. Above the outwash terrace a loop moraine of LGM age completely encircles the margins of the basin. A stream cut exposed by catastrophic (tectonic or surge?) release of meltwater displays a lithostratigraphic succession that is bereft of organic material for radiocarbon dating. Five optically-stimulated luminescence (OSL) dates place the maximum age of the lowest till at 81 ka.Particle size distributions allow clear distinctions between major lithic units. Heavy mineral analysis of the middle and lower coarse units in the section provide information on sediment sourcing and on major lithostratigraphic divisions. Trace element concentrations provide information on the relative homogeneity of the deposits. The HREE (heavy rare earth element) concentrations allow discrimination of the lower till from the rest of the section; the LREE (light rare earth element) concentrations highlight differences between the lower till, LGM till, and the rest of the section.  相似文献   

3.
We estimate the lateral variations of the elastic thickness of the Maracaibo block with a 3D numerical approach by using centered finite differences. The calculation is based on solving the fourth-order partial differential equation that governs the bending of a thin plate fixed on its boundaries (zero displacement) with variable thickness (or elastic thickness for this particular case). An initial plate-load model is built and is iteratively modified to fit the general basement configuration and gravity data. The final result is an elastic thickness map that covers the Maracaibo block and the surrounding sections of the South American plate. It shows that the elastic thickness ranges from 30 km to 18 km with a mean value of 23.6 km and a mode of 26 km. The largest elastic thickness values are associated with the location of the Santa Marta Mountains and the Barinas Apure Basin, while the smallest ones with the Mérida Andes-Maracaibo Basin flexural system. The current basement configuration within the Maracaibo basin, formed as a result of its geodynamic evolution, has affected the mechanical properties of the Maracaibo block near the current Mérida Andes position. The load of the Perijá Range is compensated by a complex stress tensor, and that of the Santa Marta Mountains does not have an isostatic root as it is held by a relatively strong lithosphere.  相似文献   

4.
At Pedregal, more than 40 m of sediments are exposed within a ‘fan complex’ formed between lateral moraines of the adjacent Mucuchache and El Caballo valleys. Early and late Mérida (Wisconsinan) glaciations are represented by till and till plus proglacial sediments, respectively. A middle Wisconsinan interstadial event, here termed the Pedregal interstade, began at the end of the Early Mérida glaciation at approximately 60 ka BP. Following the retreat of ice from the small Pedregal Basin, a lake formed when the local drainage was blocked due to movement of the Mesa de Caballo along the Boconó Fault. Shallow lake or no-lake phases lasted approximately a few hundred to, at most, 2000 years, and each lake phase was marked by peat accumulation. Four of seven peats identified formed during sufficiently long intervals for soil profiles (incipient to mature Spodosols) also to develop. The Spodosol with the strongest development (Eb/Bsb/Coxb/Cub horizons) is found adjacent to the lowest peat and reflects ongoing early Mérida stadial (MIS 3) conditions; the youngest peats, associated with weak podzolic soils (Eb/Bsb horizons), formed under slightly warmer interstadial conditions, presumably with less soil water. Cyclic lacustrine deposition is related to lake level and relative depth fluctuations, due in part to variable shoreline/delta progradation and shallowing as the lake deepened in general. Whereas final drainage of the lake is related to movement of the Boconó Fault and breach of the moraines that form the Mesa de Caballo, earlier lake level fluctuations appear related to climate change. Radiocarbon dating of the peats suggests they are related to warmer periods and may tentatively correlate with small ‘interstadials’ or ‘D-O events’ detected in the oxygen-isotope record of Greenland ice cores and North Atlantic marine sediments.  相似文献   

5.
The geometry of tectonic structures, attributed to the Neogene–Quaternary time interval, is described in the active setting of the Venezuelan Andes. Our methodology is based on the analysis of radar satellite and Digital Elevation Model imagery, complemented by structural fieldwork and the compilation of seismotectonic data to make a structural analysis on a regional scale. Radar images provide first class data for morphostructural analysis in areas of dense vegetation and frequent cloud covering, like the Venezuelan Andes. We focused our analysis in the Burbusay–Río Momboy and Boconó faults corner located in the central part of the belt.We have described three stages of deformation during the Neogene–Quaternary. The first one, Mio-Pliocene in age, is a NW–SE compression responsible for the uplift of the Venezuelan Andes. The second tectonic stage corresponds to a strike-slip regime of deformation marked by shearing along the Boconó, Burbusay and Valera faults, which separates two triangular wedges in the larger Trujillo block. This strike-slip faulting-dominated compressional-extensional tectonic regime allowed the Trujillo crustal block to move towards the NE. Wrenching has therefore started at some point between the Pliocene and the Quaternary. These two tectonic events are consistent with ongoing strain partitioning in the Venezuelan Andes. The third stage corresponds to extensional deformation limited to the Trujillo block and is still active today. Extension is associated with the motion of crustal blocks moving relative to each other, probably above the upper-lower crust boundary. Such extensional deformation can be understood considering that the crust extends and stretches at the same time as it moves towards the NE. The combination of both horizontal lateral motion and extension is characteristic of a tectonic escape process. The northeastward escape of the Trujillo block, which belongs to the larger North Andes block, occurs as a result of the combination of the NW–SE intracontinental convergence between the South-American plate and the Maracaibo block, and the presence to the north of the Caribbean oceanic plate considered as a free boundary. We have showed that the kinematics of the Caribbean plate offers not only a favorable environment, but may also be considered as the driving force of the tectonic escape of the North Andes block.  相似文献   

6.
The southern Andes plate boundary zone records a protracted history of bulk transpressional deformation during the Cenozoic, which has been causally related to either oblique subduction or ridge collision. However, few structural and chronological studies of regional deformation are available to support one hypothesis or the other. We address along- and across-strike variations in the nature and timing of plate boundary deformation to better understand the Cenozoic tectonics of the southern Andes.Two east–west structural transects were mapped at Puyuhuapi and Aysén, immediately north of the Nazca–South America–Antarctica triple junction. At Puyuhuapi (44°S), north–south striking, high-angle contractional and strike-slip ductile shear zones developed from plutons coexist with moderately dipping dextral-oblique shear zones in the wallrocks. In Aysén (45–46°), top to the southwest, oblique thrusting predominates to the west of the Cenozoic magmatic arc, whereas dextral strike-slip shear zones develop within it.New 40Ar–39Ar data from mylonites and undeformed rocks from the two transects suggest that dextral strike-slip, oblique-slip and contractional deformation occurred at nearly the same time but within different structural domains along and across the orogen. Similar ages were obtained on both high strain pelitic schists with dextral strike-slip kinematics (4.4±0.3 Ma, laser on muscovite–biotite aggregates, Aysén transect, 45°S) and on mylonitic plutonic rocks with contractional deformation (3.8±0.2 to 4.2±0.2 Ma, fine-grained, recrystallized biotite, Puyuhuapi transect). Oblique-slip, dextral reverse kinematics of uncertain age is documented at the Canal Costa shear zone (45°S) and at the Queulat shear zone at 44°S. Published dates for the undeformed protholiths suggest both shear zones are likely Late Miocene or Pliocene, coeval with contractional and strike-slip shear zones farther north. Coeval strike-slip, oblique-slip and contractional deformation on ductile shear zones of the southern Andes suggest different degrees of along- and across-strike deformation partitioning of bulk transpressional deformation.The long-term dextral transpressional regime appears to be driven by oblique subduction. The short-term deformation is in turn controlled by ridge collision from 6 Ma to present day. This is indicated by most deformation ages and by a southward increase in the contractional component of deformation. Oblique-slip to contractional shear zones at both western and eastern margins of the Miocene belt of the Patagonian batholith define a large-scale pop-up structure by which deeper levels of the crust have been differentially exhumed since the Pliocene at a rate in excess of 1.7 mm/year.  相似文献   

7.
Precambrian metaplutonic rocks of the São Gabriel block in southernmost Brazil comprise juvenile Neoproterozoic calc-alkaline gneisses (Cambaí Complex). The connection with associated (ultra-)mafic metavolcanic and metasedimentary rocks (Palma Group) is not well established. The whole complex was deformed during the Brasiliano orogenic cycle. Both metasedimentary and metavolcanic rocks as well as metaplutonic rocks of the Cambaí Complex have been sampled for geochemical analyses in order to get constraints on the tectonic setting of these rocks and to establish a tectonic model for the São Gabriel block and its role during the assembly of West-Gondwana. The major element compositions of the igneous rocks (Palma Group and Cambaí Complex) indicate a subalkaline character; most orthogneisses have a calc-alkaline chemistry; many metavolcanic rocks of the Palma Group show signatures of low-K tholeiitic volcanic arc basalts. Trace element data, especially Ti, Zr, Y, Nb, of most igneous samples from both the lower Palma Group and the Cambaí Complex indicate origin at plate margins, i.e., in a subduction zone environment. This is corroborated by relative enrichment in LREE, low contents of Nb and other high field strength elements and enrichment in LILE like Rb, Ba, and Th. The data indicate the possible existence of two suites, an oceanic island arc and a continental arc or active continental margin. However, some ultramafic samples of the lower Palma Group in the western São Gabriel block indicate the existence of another volcanic suite with intra-plate character which possibly represents relics of oceanic island basalts (OIB). Trace element data indicate contributions from andesitic to mixed felsic and basic arc sources for the metasedimentary rocks. The patterns of chondrite- and N-MORB-normalized spider diagrams resemble the patterns of the igneous rocks, i.e., LILE and LREE enrichment and HFS depletion. The geochemical signatures of most igneous and metasedimentary samples and their low (87Sr/86Sr)t ratios suggest only minor contribution of old continental crust.A geotectonic model for the São Gabriel block comprises east-ward subduction and following accretion of an intra-oceanic island arc to the eastern border of the Rio de la Plata Craton at ca. 880 Ma, and westward subduction beneath the newly formed active continental margin between ca. 750 and 700 Ma. The São Gabriel block represents relics of an early Brasiliano oceanic basin between the Rio de la Plata and Kalahari Cratons. This ocean to the east of the Rio de la Plata Craton might be traced to the north and could possibly be linked with Neoproterozoic juvenile oceanic crust in the western Brasília belt (Goiás magmatic arc).  相似文献   

8.
In contrast to the normal ‘Wilson cycle’ sequence of subduction leading to continental collision and associated mountain building, the evolution of the New Zealand plate boundary in the Neogene reflects the converse—initially a period of continental convergence that is followed by the emplacement of subduction. Plate reconstructions allow us to place limits on the location and timing of the continental convergence and subduction zones and the migration of the transition between the two plate boundary regimes. Relative plate motions and reconstructions since the Early to Mid-Miocene require significant continental convergence in advance of the emplacement of the southward migrating Hikurangi subduction—a sequence of tectonism seen in the present plate boundary geography of Hikurangi subduction beneath North Island and convergence in the Southern Alps along the Alpine Fault. In contrast to a transition from subduction to continental convergence where the leading edge of the upper plate is relatively thin and deformable, the transition from a continental convergent regime, with its associated crustal and lithospheric thickening, to subduction of oceanic lithosphere requires substantial thinning (removal) of upper plate continental lithosphere to make room for the slab. The simple structure of the Wadati–Benioff zone seen in the present-day geometry of the subducting Pacific plate beneath North Island indicates that this lithospheric adjustment occurs quickly. Associated with this rapid lithospheric thinning is the development of a series of ephemeral basins, younging to the south, that straddle the migrating slab edge. Based on this association between localized vertical tectonics and slab emplacement, the tectonic history of these basins records the effects of lithospheric delamination driven by the southward migrating leading edge of the subducting Pacific slab. Although the New Zealand plate boundary is often described as simply two subduction zones linked by the transpressive Alpine Fault, in actuality the present is merely a snapshot view of an ongoing and complex evolution from convergence to subduction.  相似文献   

9.
F. Suter  M. Sartori  R. Neuwerth  G. Gorin   《Tectonophysics》2008,460(1-4):134-157
The northern Andes are a complex area where tectonics is dominated by the interaction between three major plates and accessory blocks, in particular, the Chocó-Panamá and Northern Andes Blocks. The studied Cauca Valley Basin is located at the front of the Chocó-Panamá Indenter, where the major Romeral Fault System, active since the Cretaceous, changes its kinematics from right-lateral in the south to left-lateral in the north. Structural studies were performed at various scales: DEM observations in the Central Cordillera between 4 and 5.7°N, aerial photograph analyses, and field work in the folded Oligo-Miocene rocks of the Serranía de Santa Barbara and in the flat-lying, Pleistocene Quindío-Risaralda volcaniclastic sediments interfingering with the lacustrine to fluviatile sediments of the Zarzal Formation.The data acquired allowed the detection of structures with a similar orientation at every scale and in all lithologies. These families of structures are arranged similarly to Riedel shears in a right-lateral shear zone and are superimposed on the Cretaceous Romeral suture.They appear in the Central Cordillera north of 4.5°N, and define a broad zone where 060-oriented right-lateral distributed shear strain affects the continental crust. The Romeral Fault System stays active and strain partitioning occurs among both systems. The southern limit of the distributed shear strain affecting the Central Cordillera corresponds to the E–W trending Garrapatas–Ibagué shear zone, constituted by several right-stepping, en-échelon, right-lateral, active faults and some lineaments. North of this shear zone, the Romeral Fault System strike changes from NNE to N.Paleostress calculations gave a WNW–ESE trending, maximum horizontal stress, and 69% of compressive tensors. The orientation of σ1 is consistent with the orientation of the right-lateral distributed shear strain and the compressive state characterizing the Romeral Fault System in the area: it bisects the synthetic and antithetic Riedels and is (sub)-perpendicular to the active Romeral Fault System.It is proposed that the continued movement of the Chocó–Panamá Indenter may be responsible for the 060-oriented right-lateral distributed shear strain, and may have closed the northern part of the Cauca Valley, thereby forming the Cauca Valley Basin.Conjugate extensional faults observed at surface in the flat-lying sediments of the Zarzal Formation and Quindío-Risaralda volcaniclastic Fan are associatedwith soft-sediment deformations. These faults are attributed to lateral spreading of the superficial layers during earthquakes and testify to the continuous tectonic activity from Pleistocene to Present.Finally, results presented here bring newinformation about the understanding of the seismic hazard in this area: whereas the Romeral Fault Systemwas so far thought to be themost likely source of earthquakes, themore recent cross-cutting fault systems described herein are another potential hazard to be considered.  相似文献   

10.
A 3-D structural model of the Caribbean-South American plate boundary was constructed by gravity modeling. The model was constrained by four wide-angle seismic refraction sections, Moho depth estimations from receiver functions, and additionally seismological hypocenters, surface geology, and geodynamic information. Density values were calculated from empirical velocity-density functions, and mineralogical-chemical composition considering specific P/T conditions. We tested different structural models for Western and Eastern Venezuela. In the final model, the fit of the measured and modeled gravity fields for a long Caribbean slab in Western Venezuela was better than the fit obtained for a short one. This interpretation is consistent with the constraining data. The slab is interpreted to extend further to the south beneath Northern Colombia and culminates in the area of the seismic cluster of the Bucaramanga nest. The modeling estimates a slab dip angle under Maracaibo and Mérida Andes of 15°, which increases to 32° below 100 km depth. The dip direction of approx. N150°E ± 5 increases lightly eastward. In Eastern Venezuela, considering its short wavelength, lineaments analyzed from gravity data (by curvature methods and Euler deconvolution) seem to be related to shallow structures and density contrast in the Serranía del Interior and not from a deep detached slab beneath the continental crust. It is deduced from modeling results that this slab configuration has a very small influence on the gravity field. The slab was modeled according to the subduction-transform propagation model with purely westward subduction and a slab break off along a vertical dip-slip tear through the lithosphere.  相似文献   

11.
The Borborema Province, in the NE of Brazil, is a rather complex piece in the Brazil–Africa puzzle as it represents the junction of the Dahomeyide/Pharusian, Central African, Araçuai and Brasilia fold belts located between the West-African/São Luis, Congo/São Francisco and Amazonas craton. The correlation between the Dahomeyides from W-Africa (Ghana, Benin, Togo, and Mali) and the Borborema Province involves the Médio Coreaú and Central Ceará domains. The inferred continuation of the main oceanic suture zone exposed in the Dahomeyides of W Africa is buried beneath the Phanerozoic Parnaíba Basin in Brazil (northwest of the Médio Coreaú domain) where some high density gravity anomalies may represent hidden remnants of an oceanic suture. In addition to this major suture a narrow, nearly continuous strip composed of mainly mafic pods containing relics of eclogite-facies assemblages associated with partially migmatized granulite-facies metapelitic gneisses has been found further east in the NW Borborema Province. These high pressure mafic rocks, interpreted as retrograded eclogites, are located between the Transbrasiliano Lineament and the Santa Quitéria continental arc and comprise primitive to evolved arc-related rocks with either arc- or MORB-type imprints that can indicate either deep subduction of oceanic lithosphere or roots of continental and oceanic magmatic arcs. Average peak P–T conditions under eclogite-facies metamorphism (T = 770 °C and P = 17.3 kbar) were estimated using garnet–clinopyroxene thermometry and Jd content in clinopyroxene. Transition to granulite-facies conditions, as well as later widespread re-equilibration under amphibolite facies, were registered both in the basic and the metapelitic rocks and suggest a clockwise P–T path characterized by an increase in temperature followed by strong decompression. A phenomenon possibly related to the exhumation of a highly thickened crust associated with the suturing of the Médio Coreaú and Central Ceará domains, two distinct crustal blocks separated by the Transbrasiliano Lineament.  相似文献   

12.
The analyses of the main parameters controlling the present Chile‐type and Marianas‐type tectonic settings developed along the eastern Pacific region show four different tectonic regimes: (1) a nearly neutral regime in the Oregon subduction zone; (2) major extensional regimes as the Nicaragua subduction zone developed in continental crust; (3) a Marianas setting in the Sandwich subduction zone with ocean floored back‐arc basin with a unique west‐dipping subduction zone and (4) the classic and dominant Chile‐type under compression. The magmatic, structural and sedimentary behaviours of these four settings are discussed to understand the past tectonic regimes in the Mesozoic Andes based on their present geological and tectonic characteristics. The evaluation of the different parameters that governed the past and present tectonic regimes indicates that absolute motion of the upper plate relative to the hotspot frame and the consequent trench roll‐back velocity are the first order parameters that control the deformation. Locally, the influences of the trench fill, linked to the dominant climate in the forearc, and the age of the subducted oceanic crust, have secondary roles. Ridge collisions of seismic and seismic oceanic ridges as well as fracture zone collisions have also a local outcome, and may produce an increase in coupling that reinforces compressional deformation. Local strain variations in the past and present Andes are not related with changes in the relative convergence rate, which is less important than the absolute motion relative to the Pacific hotspot frame, or changes in the thermal state of the upper plate. Changes in the slab dip, mainly those linked to steepening subduction zones, produce significant variations in the thermal state, that are important to generate extreme deformation in the foreland. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

13.
We reconstructed the accretion process related to Paleo-Tethys subduction recorded in northern Thailand, based on mélange and thrust structures, and metamorphic temperatures derived from illite crystallinity data. Mélange formation was characterized by hydrofracturing and cataclastic deformation, with mud injection under semi-lithified conditions followed by shear deformation and pressure solution. Illite crystallinity data suggest metamorphic temperatures below 250 °C during mélange formation. The combined structural and metamorphic data indicate that during mélange formation, the accretionary complex related to Paleo-Tethys subduction developed at shallow levels within an accretionary prism. Asymmetric shear fabrics in mélange indicate top-to-south shear. After correction for rotation associated with collision between the Indian and Eurasian continents, the trend of the Paleo-Tethys subduction zone is estimated to have been N80 °E. We conclude that the Paleo-Tethys was subducted northward beneath the Indochina Block from the Permian to Triassic.  相似文献   

14.
《地学前缘(英文版)》2020,11(4):1219-1229
We investigate the effect of the westerly rotation of the lithosphere on the active margins that surround the Americas and find good correlations between the inferred easterly-directed mantle counterflow and the main structural grain and kinematics of the Andes and Sandwich arc slabs.In the Andes,the subduction zone is shallow and with low dip,because the mantle flow sustains the slab;the subduction hinge converges relative to the upper plate and generates an uplifting doubly verging orogen.The Sandwich Arc is generated by a westerly-directed SAM(South American) plate subduction where the eastward mantle flow is steepening and retreating the subduction zone.In this context,the slab hinge is retreating relative to the upper plate,generating the backarc basin and a low bathymetry single-verging accretionary prism.In Central America,the Caribbean plate presents a more complex scenario:(a) To the East,the Antilles Arc is generated by westerly directed subduction of the SAM plate,where the eastward mantle flow is steepening and retreating the subduction zone.(b) To the West,the Middle America Trench and Arc are generated by the easterly-directed subduction of the Cocos plate,where the shallow subduction caused by eastward mantle flow in its northern segment gradually steepens to the southern segment as it is infered by the preexisting westerly-directed subduction of the Caribbean Plateau.In the frame of the westerly lithospheric flow,the subduction of a divergent active ridge plays the role of introducing a change in the oceanic/continental plate's convergence angle,such as in NAM(North American)plate with the collision with the Pacific/Farallon active ridge in the Neogene(Cordilleran orogenic type scenario).The easterly mantle drift sustains strong plate coupling along NAM,showing at Juan de Fuca easterly subducting microplate that the subduction hinge advances relative to the upper plate.This lower/upper plate convergence coupling also applies along strike to the neighbor continental strike slip fault systems where subduction was terminated(San Andreas and Queen Charlotte).The lower/upper plate convergence coupling enables the capture of the continental plate ribbons of Baja California and Yakutat terrane by the Pacific oceanic plate,transporting them along the strike slip fault systems as para-autochthonous terranes.This Cordilleran orogenic type scenario,is also recorded in SAM following the collision with the Aluk/Farallon active ridge in the Paleogene,segmenting SAM margin into the eastwardly subducting Tupac Amaru microplate intercalated between the proto-LiquineOfqui and Atacama strike slip fault systems,where subduction was terminated and para-autochthonous terranes transported.In the Neogene,the convergence of Nazca plate with respect to SAM reinstalls subduction and the present Andean orogenic type scenario.  相似文献   

15.
Tectonics and plate tectonics model for the Variscan belt of Europe   总被引：2，自引：0，他引：2  
A plate tectonics model is presented to explain the tectonometamorphic characteristics of the European Variscides. After the closing of two oceanic domains by two-sided subduction (500-420 Ma) and obduction (420-380 Ma), collision of the European and African continental plates occurred. We propose that the subsequent complex intracontinental deformation (380-290 Ma) is the result of a double subduction of the continental lithosphere accompanied by crust-mantle décollement. This mechanism explains the progressive crustal thickening and migration of the deformation through time from the sutures toward the external parts of the Variscan Belt. Accounting for this model and for the relationships between the European Variscides and the other Paleozoic peri-Atlantic belts (Caledonides, Appalachian, Mauritanides and Morocco), we infer the relative positions of Africa, America and Europe between the Silurian and the Permian.  相似文献   

16.
A tectonic mélange exposed on land is examined to reveal relationships between mélange formation, underplating, and deformation mechanisms, focusing on the deformation of basaltic rocks. The studied Mugi Mélange of the Shimanto Belt is composed of a shale matrix surrounding various blocks of sandstone, pelagic sediments, and basalts. The mélange was formed during Late Cretaceous to early Tertiary times in a subduction zone under P–T conditions of 150–200 °C and 6–7 km depth as estimated from vitrinite reflectance and quartz veins fluid inclusions. The mélange represents a range of deformation mechanisms; pressure solution with micro-scale cataclasis in the shale matrix, brittle tension cracking in the blocks, and ubiquitous strong cataclasis in the basal portion of basaltic layers. The cataclastic deformation in the basalts suggests a breakage of a topographic high in the seismogenic depth.  相似文献   

17.
Accretionary complexes record the histories of changes in physical properties of sediments from unlithified sediments to lithified rocks through the deformation processes along subduction interface. The trench sediment suffered various deformation of particulate flow, pressure solution deformation and cataclastic faultings from ductile to brittle regime during accretion in subduction zone. Tectonic mélange is a characteristic rock in on-land accretionary complexes. The dominant deformation mechanism of tectonic mélange formation is pressure solution on the basis of microscopic observation. However, brittle slickenlines are also commonly observed on mélange foliations at the outcrop scale. Although the slickenlines as a brittle failure is common on the surface of the pressure solution foliation, the relationship of their kinetic are still uncertain. Detailed observations of slickenlines suggest that they are formed by reactivation of the mélange foliations, which indicates that the slickenlines are developed after formation of block in matrix texture characterized in mélange. In addition, mélange foliations are cut by faults related to underplating of oceanic materials. Therefore, formation of slickenlines occur before underplating in a relatively deep portion along subduction interface. On the basis of P-T conditions reported from other parts of the Cretaceous Shimanto Belt, the mélange formation and underplating is inferred to have occurred around the seismic front or within the seismogenic zone. The change in deformation mechanisms from pressure solution to brittle failure may be the first change in physical properties from plastic to brittle around seismic front.  相似文献   

18.
The Songliao basin (SB) is a superposed basin with two different kinds of basin fills. The lower one is characterized by a fault-bounded volcanogenic succession comprising of intercalated volcanic, pyroclastic and epiclastic rocks. The volcanic rocks, dating from 110 Ma to 130 Ma, are of geochemically active continental margin type. Fast northward migration of the SB block occurred during the major episodes of the volcanism inferred from their paleomagnetic information. The upper one of the basin fill is dominated by non-marine sag-style sedimentary sequence of siliciclastics and minor carbonates. The basin center shifted westwards from the early to late Cretaceous revealed by the GGT seismic velocity structure suggesting dynamic change in the basin evolution. Thus, a superposed basin model is proposed. Evolution of the SB involves three periods including (1) Alptian and pre-Aptian: a retroarc basin and range system of Andes type related to Mongolia-Okhotsk collisional belt (MOCB); (2) Albian to Companian: a sag-like strike-slip basin under transtension related to oblique subduction of the Pacific plate along the eastern margin of the Eurasian plate; (3) since Maastrichtian: a tectonic inverse basin under compression related to normal subduction of the Pacific plate under the Eurasian plate, characterized by overthrust, westward migration of the depocenter and eastward uplifting of the basin margin.  相似文献   

19.
Permian to Cretaceous mélange of the McHugh Complex on the Kenai Peninsula, south-central Alaska includes blocks and belts of graywacke, argillite, limestone, chert, basalt, gabbro, and ultramafic rocks, intruded by a variety of igneous rocks. An oceanic plate stratigraphy is repeated hundreds of times across the map area, but most structures at the outcrop scale extend lithological layering. Strong rheological units occur as blocks within a matrix that flowed around the competent blocks during deformation, forming broken formation and mélange. Deformation was noncoaxial, and disruption of primary layering was a consequence of general strain driven by plate convergence in a relatively narrow zone between the overriding accretionary wedge and the downgoing, generally thinly sedimented oceanic plate. Soft-sediment deformation processes do not appear to have played a major role in the formation of the mélange. A model for deformation at the toe of the wedge is proposed in which layers oriented at low angles to σ1 are contracted in both the brittle and ductile regimes, layers at 30–45° to σ1 are extended in the brittle regime and contracted in the ductile regime, and layers at angles greater than 45° to σ1 are extended in both the brittle and ductile regimes. Imbrication in thrust duplexes occurs at deeper levels within the wedge. Many structures within mélange of the McHugh Complex are asymmetric and record kinematic information consistent with the inferred structural setting in an accretionary wedge. A displacement field for the McHugh Complex on the lower Kenai Peninsula includes three belts: an inboard belt of Late Triassic rocks records west-to-east-directed slip of hanging walls, a central belt of predominantly Early Jurassic rocks records north–south directed displacements, and Early Cretaceous rocks in an outboard belt preserve southwest–northeast directed slip vectors. Although precise ages of accretion are unknown, slip directions are compatible with inferred plate motions during the general time frame of accretion of the McHugh Complex. The slip vectors are interpreted to preserve the convergence directions between the overriding and underriding plates, which became more oblique with time. They are not considered indicative of strain partitioning into belts of orogen-parallel and orogen-perpendicular displacements, because the kinematic data are derived from the earliest preserved structures, whereas fabrics related to strain partitioning would be expected to be superimposed on earlier accretion-related fabrics.  相似文献   

20.
How Alpine or Himalayan are the Central Andes?   总被引：2，自引：0，他引：2  
 Although non-collisional mountain belts, such as the Andes, and collisional mountain belts, such as the Alps and the Himalayas–Tibet, have been regarded as fundamentally different, the Central Andes share several features with the Himalayas–Tibet. The most important of these are extremely thickened (≥70 km) continental crustal roots supporting high plateaus and mountain fronts characterized by large basement thrusts. The main prerequisite for very thick crustal roots and extreme mountainous topography appears to be large-scale underthrusting of continental crust of normal thickness, irrespective of whether the crustal thrusts are antithetic with respect to subduction as in the Andes, or synthetic with respect to preceding subduction of oceanic lithosphere as in the Himalayas. In both cases sole thrusts near the base of the continental crust nucleated in thermally anomalous zones of the hinterland and then propagated across ramps into shallower detachments located within thick sedimentary or metasedimentary cover rocks. In contrast to the Central Andes and the Himalayas, the Alps are characterized by intracrustal detachment which allowed both the subduction of lower crust and a stacking of relatively thin upper crustal slivers, which make up a narrow mountain chain with a more subdued topography. Received: 10 August 1998 / Accepted: 1 March 1999  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号