共查询到20条相似文献，搜索用时 15 毫秒
1.
根据岩性组合变化、测井曲线叠加样式及地震反射特征,将东营三角洲沙三中亚段划分为八个期次,准层序组PS8~PS1,各期次间沉积小型湖泛泥岩楔。结合岩心及测录井沉积相分析,认为研究区发育三角洲-重力流-湖泊沉积体系。东南部主要发育三角洲分流河道、河口坝、席状砂,西北部发育与三角洲前缘滑塌相伴生的坡移堆积体、滑塌浊积岩和远源浊积岩。准层序组PS8~PS1,活动三角洲经历了由南至北的迁移演化过程。当波浪与河流能量能够抗衡并往复运动时,形成厚度较大的三角洲楔状体叠加区,沉积席状砂和河口坝砂体。受湖平面变化、构造沉降及沉积物供给速率的影响,湖退体系域早期PS7~PS4重力流砂体含油丰富,而浅水区准层序组界线附近的席状砂和河口坝由于临近具有侧向封堵及局部盖层作用的泥岩楔及沼泽沉积,其含油性也较好。 相似文献
2.
松辽盆地上白垩统嫩江组是第二个湖泛期形成的一套退积-进积型地层,根据发育的构造不整合、沉积不整合、湖泛面及水退面等11个层序界面的发育特征,将嫩江组划分为1个二级层序、2个三级层序和10个四级层序,在四级层序格架内恢复了沉积充填演化史。嫩江组一段沉积时期是盆地第二次湖侵期,随着湖盆水域不断扩大,在地层顶部形成SB07最大湖泛面,由此形成了嫩江组一段以低角度退积型三角洲沉积为特征的退积型层序,同时在三角洲前缘发育大型的浊积水道及浊积扇。嫩江组二段到五段沉积时期,由于盆地东部抬升,形成了一系列由东向西高角度进积型三角洲为沉积特征的进积型层序,同时由于三角洲前缘斜坡发生滑塌, 在其前部湖相区形成一系列呈南北向排列的滑塌浊积扇体。退积型与进积型层序控制的沉积体系区别是物源方向发生了90°转变,而进积型层序结构及沉积特征也表明嫩江组二段底部油页岩是在湖盆萎缩过程中逐渐形成的,不是在最大湖泛期由于海水侵入形成的。 相似文献
3.
《Boreas: An International Journal of Quaternary Research》2018,47(4):973-1002
This study presents a synthesis of the geomorphology, facies variability and depositional architecture of ice‐marginal deltas affected by rapid lake‐level change. The integration of digital elevation models, outcrop, borehole, ground‐penetrating radar and high‐resolution shear‐wave seismic data allows for a comprehensive analysis of these delta systems and provides information about the distinct types of deltaic facies and geometries generated under different lake‐level trends. The exposed delta sediments record mainly the phase of maximum lake level and subsequent lake drainage. The stair‐stepped profiles of the delta systems reflect the progressive basinward lobe deposition during forced regression when the lakes successively drained. Depending on the rate and magnitude of lake‐level fall, fan‐shaped, lobate or more digitate tongue‐like delta morphologies developed. Deposits of the stair‐stepped transgressive delta bodies are buried, downlapped and onlapped by the younger forced regressive deposits. The delta styles comprise both Gilbert‐type deltas and shoal‐water deltas. The sedimentary facies of the steep Gilbert‐type delta foresets include a wide range of gravity‐flow deposits. Delta deposits of the forced‐regressive phase are commonly dominated by coarse‐grained debrisflow deposits, indicating strong upslope erosion and cannibalization of older delta deposits. Deposits of supercritical turbidity currents are particularly common in sand‐rich Gilbert‐type deltas that formed during slow rises in lake level and during highstands. Foreset beds consist typically of laterally and vertically stacked deposits of antidunes and cyclic steps. The trigger mechanisms for these supercritical turbidity currents were both hyperpycnal meltwater flows and slope‐failure events. Shoal‐water deltas formed at low water depths during both low rates of lake‐level rise and forced regression. Deposition occurred from tractional flows. Transgressive mouthbars form laterally extensive sand‐rich delta bodies with a digitate, multi‐tongue morphology. In contrast, forced regressive gravelly shoal‐water deltas show a high dispersion of flow directions and form laterally overlapping delta lobes. Deformation structures in the forced‐regressive ice‐marginal deltas are mainly extensional features, including normal faults, small graben or half‐graben structures and shear‐deformation bands, which are related to gravitational delta tectonics, postglacial faulting during glacial‐isostatic adjustment, and crestal collapse above salt domes. A neotectonic component cannot be ruled out in some cases. 相似文献
4.
构造活动盆地沉积层序形成过程模拟——以断陷和前陆盆地为例 总被引：5，自引：1，他引：4
应用二维层序地层模拟系统开展了构造活动盆地沉积层序的形成过程的动态模拟分析,揭示了同沉积断裂活动、湖平面变化及沉积物供给量变化相互作用对沉积层序形成的控制作用。模拟表明,快速的构造沉降、相对高的湖平面和大量的沉积物供给是形成相对深水扇三角洲的必要条件;而沉积物的供给量变小或构造沉降量加大时有利于形成近岸湖底扇或水下扇。模拟揭示出断陷湖盆陡坡边缘断裂形成的古地貌坡折控制着低水位域浊积扇或湖底扇的发育部位,同时对水进或高位域的三角洲前缘的沉积中心的分布具控制作用。断裂坡折带的构造沉降是控制可容纳空间变化的关键因素。在陆内前陆逆冲构造边缘,层序发育早期（底部）发育冲积扇和河流沉积,但由于相对快的构造沉降形成水进序列;在快速沉降的晚期沉降速率减小,碎屑体系向盆地方向推进,形成广泛河流三角洲沉积。由隐伏逆冲断裂形成的构造坡折带对低位域的分布具控制作用。在构造坡折带下的低位域砂体与上覆的水进域泥岩组合可形成重要的地层油气藏。 相似文献
5.
B.Z. Xian J.H. Wang J.P. Liu Y.L. Dong C.L. Gong Z.Y. Lu 《Australian Journal of Earth Sciences》2018,65(1):135-151
Sediment avalanche from delta ramp is one of the significant development mechanisms for a turbidite system in a lacustrine basin. To advance our understanding of deep-water sedimentary processes in a lacustrine delta ramp, delta-fed turbidites in the Eocene Dongying depression of the Bohai Bay Basin were studied using core data, 3-D seismic data and well log data. Sandy debris flows, muddy debris flows, mud flows, turbidity currents, slides, sandy slumps and muddy slumps were interpreted based on the identification of lithofacies. Data indicates that deep-water sedimentary processes in the study area were dominated by debris flows and slumps, which accounted for ～68% and 25% (in thickness) of total gravity flow deposits, respectively; turbidity-current deposits only accounted for ～5%. Mapping of turbidites showed that most were deposited after short-distance transportation (<20 km), restricted by the scale of deep-water areas and local topography. Channels, depositional lobes, debris flow tongues, muddy turbiditic sheets, slides and slumps were identified in a delta-fed ramp system. Slides and slumps were dominant at the base of slopes or at the hanging walls of growth faults with strong tectonic activity. Channels and depositional lobes developed in gentle, low-lying areas, where sediments were transported longer distances. Sand-rich sediment supply, short-distance transportation and local topography were crucial factors that controlled sedimentation of this ramp system. Channels generally lacked levees and only produced scattered sandstones because of possible hydroplaning of debris flow and unstable waterways. In addition to lobes, debris flow tongues could also be developed in front of channels. These findings have significant implications for hydrocarbon exploration of deep-water sandstone fed by deltas in a lacustrine basin. 相似文献
6.
PHILIP R. HILL 《Sedimentology》1984,31(3):293-309
A detailed survey of the upper and middle Nova Scotian continental slope at 42°50′N and 63°30′W indicates a complex morphology dominated by mass movements on various scales and an immature turbidity current channel. The range of sediment facies is diverse including hemipelagic and turbidite muds, turbidite sands and gravelly sandy muds of debris flow origin. Deformed units, interpreted as slump deposits are also observed. Several facies associations, related to discrete morphological environments, are recognized. Thick turbidite sand units with minor intervening mud beds are characteristic of the high-relief uppermost slope and channel margin. Thinner turbidite sands, deformed slump beds and various mud facies are associated with small-scale, hummocky mid-slope topography. Sand beds are more abundant in the depressions than on intervening hummocks indicating the preferred transport paths of small turbidity currents. At the lower end of the main turbidity current channel, frequent turbidite sand beds with relatively minor mud beds are deposited on a depositional lobe. In areas unaffected by mass movements, alternating bioturbated mud and sandy muds make up the core sequences. A local model of sedimentation is proposed for this area and illustrates that simple models of continental slope sedimentation only apply to a limited range of settings. 相似文献
7.
8.
为揭示白云凹陷文昌组构造演化与沉积充填间的耦合关系,基于三维地震数据和钻井、测井资料,采用层序原形结构剖面恢复、增强地震相分析、砂体地震扫描解释等新方法,对白云凹陷文昌组构造演化及其控制下的沉积充填过程进行了详细研究. 研究表明,响应于控凹断层“弱?极强?较强?弱”的活动过程,文昌组沉积期白云凹陷经历了初始断陷期（WCSQ1）、强断陷早期（WCSQ2）、强断陷晚期（WCSQ3）和弱断陷期（WCSQ4、WCSQ5）4个构造演化阶段. 相应地,白云主洼经历了河流?湖泊、超深湖发生、超深湖充填、深湖?浅湖发生等沉积演化过程. 其中旋转断块翘倾侧的北部缓坡带主要为河流?浅湖过渡环境,发育大?中型辫状河三角洲沉积体系;断块倾没侧的南部陡坡带主要为半深湖?深湖环境,发育近岸水下扇?扇三角洲沉积体系;湖盆中心为深湖?超深湖环境,以泥岩沉积为主,深湖区周缘发育湖底扇沉积;同时期白云东洼为陡坡+岩浆底侵形成的多隆洼地貌,以小型近岸水下扇?扇三角洲沉积体系为主,局部发育火山碎屑沉积. 文昌组沉积砂体的孔隙性受白云凹陷控凹断裂和岩浆的活动强度、物源体系及次级洼陷古地理特征等因素共同控制. 相似文献
9.
鄂尔多斯盆地东缘中生代延长组浊流沉积的发现与意义 总被引：12，自引：1，他引：12
作者在鄂尔多斯盆地东缘发现了一套典型的浊积岩系．在露头剖面上连续发育的厚约２０ｍ的浊流沉积可划分为６４个鲍玛层序，既广泛发育有代表浊流沉积特征的递交砂和多种底痕构造，又有Ｔａ—Ｔｅ都发育的典型层序，在层序组合上呈周期性变化。浊流沉积形成于晚三叠世，其上被下侏罗统富县组和中侏罗统延安组所覆，与邻区对比，其间缺少一套三角洲前缘及三角洲平原沉积．表明印支运动使鄂尔多斯盆地抬升造成差异剥蚀和在深水－半深水湖盆条件下与三角洲发育有关的浊流沉积类型出现的广泛性． 相似文献
10.
大型敞流坳陷湖盆浅水三角洲与湖盆中心砂体的形成与分布 总被引：34，自引：0，他引：34
大型敞流坳陷湖盆浅水三角洲及湖盆中心砂体已成为中国陆相盆地岩性油气藏最重要的勘探目标。通过对现代典型湖盆浅水三角洲的深入分析,结合我国中、新生代大型坳陷湖盆浅水三角洲及湖盆中心砂体的地质研究,取得以下主要进展与认识：①在分析浅水三角洲形成地质背景的基础上,按照供源体系、湖水深度及三角洲前缘倾斜坡度将湖盆三角洲分为9种成因结构类型;②建立了毯式浅水曲流河三角洲的沉积模式,指出末端分流河道及末端决口扇是浅水曲流河三角洲的典型微相类型;③分析了浅水三角洲砂体大面积分布的形成条件,指出敞流湖盆是湖盆中心浅水三角洲砂体发育的重要条件,敞流通道对湖盆中心砂体分布有重要控制作用;④湖盆中心发育河流、三角洲、湖流及密度底流砂体等牵引流成因砂体,也发育洪水浊积扇及滑塌浊积扇等重力流成因砂体;⑤大型浅水三角洲体系三级层序界面对岩性（成岩）圈闭的发育有重要控制作用,三角洲平原带层序界面上覆叠置砂体富集岩性油气藏,勘探潜力大。本文研究成果希对坳陷湖盆沉积学研究及岩性油气藏勘探能有推动作用。 相似文献
11.
为了统一东营凹陷重力流的分类方案,进一步完善断陷湖盆三角洲-重力流体系沉积模式,以牛庄洼陷沙三中亚段三角洲-重力流砂体为研究对象,运用地震、测井和岩芯观察等手段,分析层序格架内三角洲-重力流砂体的沉积特征,分布规律和控制因素。结果表明:牛庄洼陷沙三中亚段可划分为一个T-R层序,即发育快速湖侵和湖退两个体系域,并进一步细分为6个准层序组,分别对应6期三角洲砂体;重力流砂体在湖退体系域PS5-PS1准层序组中分布广泛,但在湖侵体系域分布局限,成因上可分为四种类型:滑动,滑塌,碎屑流和浊流。滑动沉积主要呈带状临近三角洲前缘砂体分布。滑塌和碎屑流沉积分布于较远的洼陷斜坡和斜坡角附近。浊流沉积呈席状分布于洼陷最远的深陷部位;高达200 m/万年的三角洲进积速率,沙三段时期明显增强的断层活动速率,顺物源方向发育的构造坡折带,以亚热带植物为主的孢粉组合特征,δ13CPDB和δ18OPDB值的负漂移现象共同揭示:三角洲高速的进积速率,构造坡折带与断裂活动,温暖潮湿的古气候条件,控制着研究区沙三中亚段三角洲-重力流砂体的形成与分布。 相似文献
12.
在进行内蒙古1∶5万区域地质调查工作中,对内蒙古赤峰元宝山镇小建昌营子一带的下二叠统三面井组砂岩进行了粒度分析。结果表明,萨胡成因环境判别值为10.66~10.76,沉积环境为河流相或三角洲相;弗里德曼粒度参数判别为陆相河砂沉积;浊流C-M判别图解显示沉积环境介于三角洲与浊流沉积之间。三面井组总体为一套河流相-三角洲前缘滑塌浊积扇沉积。滑塌浊积扇一般发育于深湖、半深湖区,结合本地区三面井组地层中缺乏海相碳酸盐岩沉积,综合认为本区的三面井组形成于河流-湖泊三角洲环境。 相似文献
13.
Sedimentology of a lacustrine fan-delta system, Miocene Horse Camp Formation, Nevada, USA 总被引：3，自引：0，他引：3
A 1600-m-thick succession of the Miocene Horse Camp Formation (Member 2) exposed in east-central Nevada records predominantly terrigenous clastic deposition in subaerial and subaqueous fan-delta environments and nearshore and offshore lacustrine environments. These four depositional environments are distinguished by particular associations of individual facies (14 defined facies). Subaerial and subaqueous fan-delta facies associations include: ungraded, matrix-and clast-supported conglomerate; normally graded, matrix- and clast-supported conglomerate; ungraded and normally graded sandstone; and massive to poorly laminated mudstone. Subaqueous fan-delta deposits typically have dewatering structures, distorted bedding and interbedded mudstone. The subaerial fan-delta environment was characterized by debris flows, hyperconcentrated flows and minor sheetfloods; the subaqueous fan-delta environment by debris flows, high- and low-density turbidity currents, and suspension fallout. The nearshore lacustrine facies association provides examples of deposits and processes rarely documented in lacustrine environments. High-energy oscillatory wave currents, probably related to a large fetch, reworked grains as large as 2 cm into horizontally stratified sand and gravel. Offshore-directed currents produced uncommonly large (typically 1–2 m thick) trough cross-stratified sandstone. In addition, stromatolitic carbonate interbedded with stratified coarse sandstone and conglomerate suggests a dynamic environment characterized by episodic terrigenous clastic deposition under high-energy conditions alternating with periods of carbonate precipitation under reduced energy conditions. Massive and normally graded sandstone and massive to poorly laminated mudstone characterize the offshore lacustrine facies association and record deposition by turbidity currents and suspension fallout. A depositional model constructed for the Horse Camp Formation (Member 2) precludes the existence of all four depositional environments at any particular time. Rather, phases characterized by deposition in subaerial fan, nearshore lacustrine and offshore lacustrine environments alternated with phases of subaerial fan-delta, subaqueous fan-delta and offshore lacustrine deposition. This model suggests that high-energy nearshore currents due to deep water along the lake margin reworked sediment of the fan edge, thus preventing development of a subaqueous fan-delta environment and promoting development of a well-defined nearshore lacustrine environment. Low-energy nearshore currents induced by shallow water along the 相似文献
14.
Studies, spanning a 3 year period, of Westphalian C strata exposed in an active quarry have enabled three dimensional reconstruction of a lacustrine delta complex. The sequence exhibits a complex history of lake infilling by sediment introduced by intermittent high energy, low sinuosity distributary channel flows. Deposition in the small 0.2 km2 lake prior to delta formation was dominated by organic matter and typified rheotrophic swamp conditions. Large lycopods colonized the swamp floor. The lake was filled by a prograding delta which comprised six horizontally and vertically stacked delta lobes. The presence of lycopods aided sediment accumulation. Fluctuations in river discharge and consequent lake level rise and fall exerted a fundamental control on delta progradation and aggradation. Flooding during low lake levels first produced erosion on the existing lobe followed by a lake level rise which created accommodation for aggradation of a new delta lobe. Further lobe erosion and low stand lobe formation occurred during lake level fall. The area's proximity to alluvial fans resulted in hyperconcentrated flood flow within the distributary channels. The occurrence upon in-channel surfaces of plant colonization, including lycopods, testifies to the ephemeral nature of the flow. The lacustrine delta complex formed at the front of a terminal alluvial fan. Northward progradation of the alluvial fan was achieved by the capture and infilling of lakes by northerly flowing distributary channels. 相似文献
15.
Winter turbidity current deposits in Late Pleistocene glaciolacustrine varves, Okanagan Valley, British Columbia, Canada 总被引：2，自引：0，他引：2
Sand units within the winter clay components of distal, glaciolacustrine varves of Kickininee Park, British Columbia show a common sequence of cross-lamination, and a similarity in grain size. A lower division of micro-cross-lamination is succeeded by two divisions of climbing ripple drift cross-lamination. The two upper divisions are differentiated on the basis of angle of climb, a marked increase occurring in the top division. The sequence is related to turbidity currents which swept down lake during winter. It is possible that the B division of some turbidite sequences may have formed under conditions of low relief bedforms similar to those which generated the lower division of the glaciolacustrine sands. Stratigraphic position and varve thickness are used to support the conclusion that the distal turbidite sands are down lake equivalents of proximal grain-flow deposits. The appearance of coarse grained deposits within winter layers of varves may cause two years of deposition to be allocated to a single varve. This may introduce large errors when varves are used as time indicators. 相似文献
16.
在岩心描述的基础上，对杏河地区长6油层沉积相进行了分析，提出了该区主要沉积相为湖泊环境的河控三角洲体系，主要为三角洲前缘亚相沉积，主要沉积微相有水下分流河道、分流河口砂坝、前缘砂席和分流间等，分流河道和河口砂坝是本区占主导地位的骨架砂体。该区长6油层的三角洲体系是安塞三角洲体系最早发育的一支，早期分流来自于北部，后期分流转由东北方向进入，由于各期分流河道迁移、袭夺、决口以及因压实的均衡调整等，从而形成三角洲复合体内部各分流三角洲砂体的相互叠置交错。根据岩心微相分析、小层砂体形态和测井剖面对比分析，对该区长6油层砂组及小层的沉积微相进行了研究，掌握了沉积微相的时空展布和变化规律。 相似文献
17.
Thierry Mulder Yannick Callec Philippe Joseph Cécile Robin Tristan Salles Jonathan Allard Emmanuelle Ducassou Brice Ferger Vincent Hanquiez Elodie Marchès Sébastien Zaragosi 《Sedimentary Geology》2010,229(3):160-191
The Lauzanier area represents the northernmost extension of the Annot Sandstone series and contains deposits between 650 and 900 m-thick. This basin was active from upper Bartonian or lower Priabonian to early Rupelian. It is composed of two superposed units separated by a major unconformity. The sediment supply is due to channelled flows coming from the south. Flow processes include mass flow to turbidity currents. The size of the particles and the absence of fine-grained sediment suggest a transport over a short distance. The Lower Unit is made of coarse-grained tabular beds interpreted as non-channelled lobe deposits. The Upper Unit is made of massive conglomerates interpreted as the channelled part of lobes. These lobe deposits settle in a tectonically confined basin according to topographic compensation that occurs from bed scale to unit scale. The abrupt progradation between the lower and the upper unit seems related to a major tectonic uplift in the area. This uplift is also suggested by a change in the petrographic nature of the source and an abrupt coarsening of the transported clasts.This field example allows providing high resolution analysis for depositional sedimentary sequences of terminal lobe deposits in a coarse-grained turbidite system. The outcrop analysis shows the lateral evolution of deposits and the system progradation allows a longitudinal analysis of facies evolution by superposing on the same outcrops the channelled lobe system and the non-channelled lobe system. These results of high-resolution outcrop analysis can be extrapolated to results obtained on sedimentary lobes in recent deep-sea turbidite system that are either restricted to cores, or with a lesser resolution (seismic). 相似文献
18.
浅水三角洲作为沉积学和油气勘探领域的热点,目前研究主要集中在大型拗陷型盆地内,对断陷湖盆关注较少。通过充分调研区域地质背景并结合永安地区戴一段的岩心、录井、测井、地震、分析化验等资料进行系统研究后认为,戴一段处于断陷早期,地形较为平缓,水体宽浅且波动频繁,气候温暖湿润,物源供给充足,具备形成浅水三角洲的有利沉积条件。研究区浅水三角洲为近源沉积,以牵引流为主;砂岩中多见强水动力沉积构造;垂向上发育进积、加积的沉积序列,具平行、亚平行及叠瓦状地震反射特征;以前缘亚相为主体,相带宽阔,可分为内、外前缘沉积,水下分流河道构成主要骨架砂体;在向湖推进过程中受沉积物可容纳空间与沉积物补给量比值(A/S)变化的影响较大,不同成因砂体类型及沉积样式呈现有规律的分布。基于以上分析,最终建立了断陷湖盆早期浅水三角洲的沉积模式,在一定程度上对丰富浅水三角洲的沉积学认识并拓展永安地区乃至整个高邮凹陷斜坡带油气勘探的领域和范围具有一定指导意义。 相似文献
19.
安塞油田王窑地区长6油层沉积微相研究 总被引：16，自引：4，他引：16
王窑地区长6油层为湖泊河控三角洲前缘沉积。主要沉积微相为三角洲前缘水下分流河道、分流河口砂坝、前缘砂席和分流间等。水下分流河道充填沉积为向上变细的砂岩层序，分流河口砂坝可期分为向上变粗的前积式和非前积式两种沉积层序类型。水下分流河道和河口砂坝砂体相互连接，形成厚度较稳定的三角洲前缘复合体。该区三角洲沉积是安塞三角洲发育较晚的一支，也是指状砂体仲入湖区最远、发育程度最高的分支。长61^1沉积期。为三角洲的初始进积阶段。三角洲沉积由两支分流组成。长61^2沉积期三角洲前缘体系完整，砂体发育，分流带相互叠置交错。根据岩心描述结果，结合砂体形态和连井剖面对比分析，对长6油层三角洲沉积微相进行了综合表征。并提出了开发调整意见，为王窑地区特低渗透油田的高效开发奠定了地质基础。 相似文献
20.
《Sedimentary Geology》1999,123(1-2):81-102
In strike-slip basins, proximal stratal patterns are a function of displacement on basin-bounding faults. In order to better understand factors that control changes in sedimentary facies and stratal patterns of the northeastern part of the Jinan Basin (Cretaceous), a strike-slip basin, we made a detailed analysis of sedimentary facies, depositional architecture and paleoflows. The sedimentary successions can be grouped into five facies associations representing five depositional environments: (1) facies association FA I (alluvial fan); (2) FA II (small-scale Gilbert-type delta); (3) FA III (large-scale, steep delta slope); (4) FA IV (base of large-scale, steep delta slope and prodelta); and (5) FA V (lacustrine plain). The successions are divided into two distinct sedimentary fills on the basis of facies associations, depositional architecture and paleocurrents: (1) marginal fill and (2) longitudinal fill. The marginal fill (ca. 3.2 km thick) is present along the strike-slip basin-bounding fault. The lower part of the marginal fill (ca. 1.3 km thick) consists of alluvial-fan deposits (FA I) along the bounding fault which are transitional northward to small-scale Gilbert-type delta (FA II) and lacustrine plain (FA V) deposits. The upper part of the marginal fill (ca. 1.9 km thick) contains large-scale, steep delta slope (FA III) and base of delta slope/prodelta (FA IV) deposits accompanied with a northward change in facies associations. In the marginal fill, the successive alluvial fan, small-scale Gilbert-type delta and large-scale, steep delta/prodelta deposits are overlapped (shingled) northeastward. The longitudinal fill (ca. 2 km thick) is characterized by eastward overlapped stacks of large-scale, steep delta slope (FA III) and base of delta slope/prodelta (FA IV) deposits with a westward progradation. The longitudinal fill was overstepped by the marginal fill. The northeastward shingled geometry of the marginal fill was most likely caused by sinistral strike-slip displacements on the basin-bounding fault. The slightly oblique (northward) progradation of the marginal fill was due to the northward basin-floor tilting. In the marginal fill, the progressive changes in facies and depositional architecture from the lower alluvial fan/small-scale Gilbert-type delta to the upper large-scale, steep delta/prodelta are suggestive of increase in basin subsidence along the strike-slip basin margin that was closely related to the variation in displacement on the basin-bounding fault. The sinistral strike-slip movements on the bounding fault also caused the eastward overlapping of the longitudinal fill. 相似文献