首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 156 毫秒
1.
Qiongdongnan Basin is a Cenozoic rift basin located on the northern passive continental margin of the South China Sea. Due to a lack of geologic observations, its evolution was not clear in the past. However, recently acquired 2-D seismic reflection data provide an opportunity to investigate its tectonic evolution. It shows that the Qiongdongnan Basin comprises a main rift zone which is 50–100 km wide and more than 400 km long. The main rift zone is arcuate in map view and its orientation changes from ENE–WSW in the west to nearly E–W in the east. It can be divided into three major segments. The generally linear fault trace shown by many border faults in map view implies that the eastern and middle segments were controlled by faults reactivated from NE to ENE trending and nearly E–W trending pre-existing fabrics, respectively. The western segment was controlled by a left-lateral strike-slip fault. The fault patterns shown by the central and eastern segments indicate that the extension direction for the opening of the rift basin was dominantly NW–SE. A semi-quantitative analysis of the fault cut-offs identifies three stages of rifting evolution: (1) 40.4–33.9 Ma, sparsely distributed NE-trending faults formed mainly in the western and the central part of the study area; (2) 33.9–28.4 Ma, the main rift zone formed and the area influenced by faulting was extended into the eastern part of the study area and (3) 28.4–20.4 Ma, the subsidence area was further enlarged but mainly extended into the flanking area of the main rift zone. In addition, Estimates of extensional strain along NW–SE-trending seismic profiles, which cross the main rift zone, vary between 15 and 39 km, which are generally comparable to the sinistral displacement on the Red River Fault Zone offshore, implying that this fault zone, in terms of sinistral motion, terminated at a location near the southern end of the Yinggehai Basin. Finally, these observations let us to favour a hybrid model for the opening of the South China Sea and probably the Qiongdongnan Basin.  相似文献   

2.
The Mondy strike-slip fault connects the W-E Tunka and N-S Hovsgol basins on the southern flank of the Baikal rift system. Ground penetrating radar (GPR) surveys in its damage zone provide constraints on thicknesses, dips, and plunges of fault planes, as well as on the amount and sense of vertical slip. Strike-slip faulting in the southern segment of the Mondy fault within the territory of Russia bears a normal slip component of motion along the W-E and NW planes. These motions have produced negative flower structures in shallow crust appearing as grabens upon Pleistocene fluvioglacial terraces. The amount of normal slip estimated from the displacement of reflection events varies over the area and reaches its maximum of 3.4 m near Mondy Village. In the Kharadaban basin link, left-lateral strike slip displaces valleys of ephemeral streams to 22 m, while normal slip detected by GPR reaches 2.2 m; this normal-to-strike slip ratio corresponds to a direction of ~ 6° to the horizon. The angles of dips of faults are in the range 75°-79°; the thicknesses of fault planes marked by low- or high-frequency anomalies in GPR records vary from 2.5 to 17.0 m along strike and decrease with depth within a few meters below the surface, which is common to near-surface coseismic motions. Many ruptures fail to reach the surface but appear rather as sinkholes localized mainly in fault hanging walls. The deformation style in the damage zone of the Mondy fault bears impact of the NW Yaminshin fault lying between its two segments. According to photoelasticity, the stress field changes locally at the intersection of the two faults, under NE compression at 38°, till the inverse orientations of principal compression and extension stresses. This stress pattern leads to a combination of normal and left-lateral strike slip components.  相似文献   

3.
A high-resolution passive seismic experiment in the Kachchh rift zone of the western India has produced an excellent dataset of several thousands teleseismic events. From this network, 500 good teleseismic events recorded at 14 mobile broadband sites are used to estimate receiver functions (for the 30–310° back-azimuth ranges), which show a positive phase at 4.5–6.1 s delay time and a strong negative phase at 8.0–11.0 s. These phases have been modeled by a velocity increase at Moho (i.e. 34–43 km) and a velocity decrease at 62–92 km depth. The estimation of crustal and lithospheric thicknesses using the inversion of stacked radial receiver functions led to the delineation of a marked thinning of 3–7 km in crustal thickness and 6–14 km in lithospheric thickness beneath the central rift zone relative to the surrounding un-rifted parts of the Kachchh rift zone. On an average, the Kachchh region is characterized by a thin lithosphere of 75.9 ± 5.9 km. The marked velocity decrease associated with the lithosphere–asthenoshere boundary (LAB), observed over an area of 120 km × 80 km, and the isotropic study of xenoliths from Kachchh provides evidence for local asthenospheric updoming with pockets of partial melts of CO2 rich lherzolite beneath the Kachchh seismic zone that might have caused by rifting episode (at 88 Ma) and the associated Deccan thermal-plume interaction (at 65 Ma) episodes. Thus, the coincidence of the area of the major aftershock activity and the Moho as well as asthenospheric upwarping beneath the central Kachchh rift zone suggests that these pockets of CO2-rich lherzolite partial melts could perhaps provide a high input of volatiles containing CO2 into the lower crust, which might contribute significantly in the seismo-genesis of continued aftershock activity in the region. It is also inferred that large stresses in the denser and stronger lower crust (at 14–34 km depths) induced by ongoing Banni upliftment, crustal intrusive, marked lateral variation in crustal thickness and related sub-crustal thermal anomaly play a key role in nucleating the lower crustal earthquakes beneath the Kachchh seismic zone.  相似文献   

4.
The Jinshajiang–Red River porphyry Cu–Mo metallogenic belt is an important Cenozoic porphyry Cu–Mo mineralization concentrating zone in the eastern Indo‐Asian collision zone. New zircon U–Pb and molybdenite Re–Os ages and compilation of previously published ages indicate that porphyry Cu–Mo deposits in the belt did not form at the same time, i.e., the porphyry emplacement and relevant Cu–Mo mineralization ages of the Ailaoshan–Red River ore belt in south range from 36.3 Ma to 34.6 Ma, and from 36.0 Ma to 33.9 Ma, respectively, which are obviously younger than the porphyry emplacement ages of 43.8–36.9 Ma and the relevant Cu–Mo mineralization ages of 41.6–35.8 Ma of the Yulong ore belt in north. Tectonic studies indicated that the Jinshajiang fault system in north and Ailaoshan–Red River fault system in south of the Jinsjiang–Red river belt had different strike-slip patterns and ages. The right-lateral strike-slip motion of the Jinshajiang fault system initiated at ca. 43 Ma with corresponding formation of the Yulong porphyry Cu–Mo system, whereas the left-lateral strike-slip motion of the Ailaoshan–Red River fault system initiated at ca. 36 Ma with corresponding formation of the Ailaoshan–Red River porphyry Cu–Mo system. Therefore, the different ages of porphyry Cu–Mo systems, between in north and south of the Jinshajiang–Red River belt, indicate that the porphyry Cu–Mo mineralization is closely related to the divergent strike-slip movements between the Jinshajiang and Ailaoshan–Red River strike-slip faulting resulted from the Indo‐Asian collision. The tanslithospheric Jinshajiang–Red River faulting caused partial melting of the enriched mantle sources of alkali-rich porphyries by depressurization or/and asthenospheric heating, and facilitated the migration of alkali-rich magmas and the corresponding formation of alkali-rich porphyries and relevant Cu–Mo deposits in the belt.  相似文献   

5.
This study aims at showing how far pre-existing crustal weaknesses left behind by Proterozoic mobile belts, that pass around cratonic Archean shields (Tanzania Craton to the southeast and Congo Craton to the northwest), control the geometry of the Albertine Rift. Focus is laid on the development of the Lake Albert and Lake Edward/George sub-segments and between them the greatly uplifted Rwenzori Mountains, a horst block located within the rift and whose highest peak rises to >5000 m above mean sea level. In particular we study how the southward propagating Lake Albert sub-segment to the north interacts with the northward propagating Lake Edward/George sub-segment south of it, and how this interaction produces the structures and geometry observed in this section of the western branch of the East African Rift, especially within and around the Rwenzori horst. We simulate behaviour of the upper crust by conducting sandbox analogue experiments in which pre-cut rubber strips of varying overstep/overlap connected to a basal sheet and oriented oblique and/or orthogonal to the extension vector, are placed below the sand-pack. The points of connection present velocity discontinuities to localise deformation, while the rubber strips represent ductile domain affected by older mobile belts. From fault geometry of developing rift segments in plan view and section cuts, we study kinematics resulting from a given set of boundary conditions, and results are compared with the natural scenario. Three different basal model-configurations are used to simulate two parallel rifts that propagate towards each other and interact. Wider overstep (model SbR3) produces an oblique transfer zone with deep grabens (max. 7.0 km) in the adjoining segments. Smaller overlap (model SbR4) ends in offset rift segments without oblique transfer faults to join the two, and produces moderately deep grabens (max. 4.6 km). When overlap doubles the overstep (model SbR5), rifts propagate sub-orthogonal to the extension direction and form shallow valleys (max. 2.9 km). Relative ratios of overlap/overstep between rift segments dictate the kind of transition zone that develops and whether or not a block (like the Rwenzoris) is captured and rotates; hence determining the end-member geometry. Rotation direction is controlled by pre-existing fabrics. Fault orientation, fault kinematics, and block rotation (once in play) reinforce each other; and depending on the local kinematics, different parts of a captured block may rotate with variable velocities but in the same general direction. Mechanical strength anisotropy of pre-structured crust only initially centres fault nucleation and propagation parallel to the grain of weakness of the basement, but at later stages of a protracted period of crustal extension, such boundaries are locally defied.  相似文献   

6.
In EGS projects, fault zones are considered as the structures controlling deep flow at the reservoir scale. Using a large set of petrophysical properties (porosity, density, permeability, thermal conductivity [TC]) measured on cores collected along the EPS-1 borehole, a model of fault zone is proposed to describe them. A fault zone is a complex structure, showing different parts with different kinds of deformations and/or materials that could explain chemical and physical processes observed during fluid-rock interactions. The different parts composing the fault zone are: (1) the fault core or gauge zone; (2) the damage zone; (3) and the protolith. They are usually heterogeneous and show different physical properties. The damage zone is a potential high permeability channel and could become the main pathway for fluids if secondary minerals seal the fault core. Porosity is the lowest within the protolith, between 0.5 and 1%, but can go up to 15% in the fault zone. Permeability ranges from 10?20 m2 in the fresh granite to, at least, 10?15 m2 in the fault core, and TC ranges from 2.5 W K?1m?1 to 3.7 W K?1m?1. Finally, variations in specific surface are set over two orders of magnitude. If the lowest values usually characterize the fresh granite far from fault zones, physical properties could show variations spread over their whole respective ranges within these fault zones.  相似文献   

7.
《Quaternary Science Reviews》2003,22(10-13):1339-1343
The Wangsan fault is exposed at Kyeongju, Korea. The andesite is unconformably covered by Quaternary alternating conglomerate and sandstone deposits. The unconformity is cut by the thrust fault which displaces a hanging wall block of about 30 m. Exposed at the surface of this fault is a light gray and brown fault gouge, about 40–120 cm thick. In order to test the consistency of ESR ages from a single fault gouge zone, we collected six gouge samples systematically along and across the Wangsan fault. We found that six samples collected from the same gouge zone show consistent ESR date estimates (average 550 ka). Because fault rock is rare along faults in unconsolidated sediments due to low confining stress near the surface, we consider that this fault gouge has been moved up with the hanging wall block along the fault. The estimated average uplift rate of the hanging wall block is about 0.04 cm/year based on the age of the displaced Quaternary deposits (vertical separation; about 20 m) dated by OSL dating methods. The depth of the fault gouge at the time of reactivation, which was estimated from uplift rate and the ESR ages, is about 220 m. Therefore, we conclude that the results of ESR age estimates represent the time of reactivation of the fault gouge at a depth of 220 m in the past during fault movement, because later movements which occurred during uplift near the surface may not have zeroed ESR signals significantly for ESR dating of fault movements.  相似文献   

8.
The Heilongjiang complex, extending along a suture zone between the Jiamusi and Songliao blocks in Northeast China, is composed mainly of blueschists, greenschists, meta-ultramafic rocks, quartzites, muscovite–albite schists and two-mica schists. Controversy has long surrounded the ages and tectonic settings of mafic rocks from the complex, which are crucial part of the complex. The lithological associations and their major and trace element compositions indicate that the mafic protoliths of the Yilan greenschists can be subdivided into alkali and tholeiitic basalts, which were derived from partial melting of a garnet-bearing and spinel-bearing mixed source, whereas the protoliths of the amphibolites are tholeiitic and were generated from the partial melting of spinel peridotite. Magmatic zircons from a tholeiitic amphibolite sample yielded a 206Pb/238U age of 256 ± 2 Ma, interpreted as its protolithic age. The sample also contains small amounts of older inherited zircons up to 344 Ma, which, together with its origin from shallow lithospheric mantle, indicate that the tholeiitic rocks were generated in a continental rift. The geochemical data suggest that further rifting led to the formation of an ocean between the Jiamusi and Songliao blocks, in which some oceanic islands developed, represented by the alkali basaltic protoliths of the Yilan greenschists. Magmatic zircons from an alkaline greenschist sample yielded a 206Pb/238U age of 162 ± 3.9 Ma, which, together with protolithic age of 141.8 ± 1 Ma previously obtained for the Yilian blueschist, support the model that the ocean between the Jiamusi and Songliao blocks closed at some time after ~ 141 Ma, not earlier at 210–180 Ma as previously considered.  相似文献   

9.
The N–S oriented Coastal Cordillera of South Central Chile shows marked lithological contrasts along strike at ∼38°S. Here, the sinistral NW–SE-striking Lanalhue Fault Zone (nomen novum) juxtaposes Permo-Carboniferous magmatic arc granitoids and associated, frontally accreted metasediments (Eastern Series) in the northeast with a Late Carboniferous to Triassic basal-accretionary forearc wedge complex (Western Series) in the southwest. The fault is interpreted as an initially ductile deformation zone with divergent character, located in the eastern flank of the basally growing, upwarping, and exhuming Western Series. It was later transformed and reactivated as a semiductile to brittle sinistral transform fault. Rb–Sr data and fluid inclusion studies of late-stage fault-related mineralizations revealed Early Permian ages between 280 and 270 Ma for fault activity, with subsequent minor erosion. Regionally, crystallization of arc intrusives and related metamorphism occurred between ∼306 and ∼286 Ma, preceded by early increments of convergence-related deformation. Basal Western Series accretion started at >290 Ma and lasted to ∼250 Ma. North of the Lanalhue fault, Late Paleozoic magmatic arc granitoids are nearly 100 km closer to the present day Andean trench than further south. We hypothesize that this marked difference in paleo-forearc width is due to an Early Permian period of subduction erosion north of 38°S, contrasting with ongoing accretion further south, which kinematically triggered the evolution of the Lanalhue Fault Zone. Permo-Triassic margin segmentation was due to differential forearc accretion and denudation characteristics, and is now expressed in contrasting lithologies and metamorphic signatures in todays Andean forearc region north and south of the Lanalhue Fault Zone.  相似文献   

10.
Possible mechanisms of rifting and the thermal regime of the lithosphere beneath the rift zone of the Vilyui sedimentary basin are considered based on the available isotopic ages of dike swarms, rates of sedimentation, and results of numerical modeling. Temporal correlations between the intrusion of mafic magma and a sharp increase in the rate of subsidence and sedimentation in the rift basin prove the contribution of both plate-tectonic and magmatic factors to the formation of the Vilyui rift. The results show a relationship between the rapid extension of the lithosphere and the formation of mafic dike swarms in the Yakutsk-Vilyui Large Igneous Province of the Siberian Platform at the Frasnian-Famennian boundary, with a peak at ~ 374.1 Ma, and at the end of the Late Devonian, with a peak at ~ 363.4 Ma. There were two pulses of dike formation during rapid subsidence of the basin basement in the period 380-360 Ma, with a sedimentation rate of 100-130 m/Myr, at a background rate of 10-20 m/Myr. Analysis of numerical thermomechanical models revealed that the best-fit model is that combining the mechanisms of intraplate extension (passive rifting) and the ascent of a mantle magmatic diapir (active rifting). A conclusion about the nature of the heat source of trap magmatism has been drawn: The plume-driven regime of the lithosphere can better explain the dynamics of extension during rifting than the decompression melting mechanism.  相似文献   

11.
《Gondwana Research》2011,19(4):674-687
The Bocaina Plateau, which is situated on the eastern flank of the continental rift of southeastern Brazil, is the highest part of the Serra do Mar. Topographic relief in this area is suggested to be closely related to its complex tectono-magmatic evolution since the breakup of Western Gondwana and opening of the South Atlantic Ocean. Apatite fission track ages and track length distributions from 27 basement outcrops were determined to assess these hypotheses and reconstruct the denudation history of the Bocaina Plateau. The ages range between 303 ± 32 and 46 ± 5 Ma, and are significantly younger than the stratigraphic ages. Mean track lengths vary from 13.44 ± 1.51 to 11.1 ± 1.48 μm, with standard deviations between 1.16 and 1.83 μm. Contrasting ages within a single plateau and similar ages at different altitudes indicate a complex regional tectonothermal evolution. The thermal histories inferred from these data imply three periods of accelerated cooling related to the Early Cretaceous continental breakup, Early Cretaceous alkaline magmatism, and the Paleogene evolution of the continental rift of southeastern Brazil. The oldest fission track ages (> 200 Ma) were obtained in the Serra do Mar region, suggesting that these areas were a long-lived source of sediments for the Paraná, Bauru, and Santos basins.  相似文献   

12.
The Tan-Lu fault zone (TLFZ) is the largest of the major faults in eastern China. Many strong earthquakes have occurred on its section in North China, but no quake greater than M ⩾ 6 has been documented in history at its northeastern section, the Yilan-Yitong fault (YYF) in Northeast China. It is usually considered that this fault has been inactive since late Quaternary and incapable of generating moderate-sized quakes. This conclusion is, however, questioned by our recent work based on high-resolution satellite image interpretation and field investigation. We found a 70-km-long surface scarp near Fangzheng county in Heilongjiang province (HLJP) and a 20-km-long scarp near Shulan county in Jilin province (JLP), and both are associated with the YYF. The trenches across these two scarps reveal a 14C displacement date of 1730 ± 40 years BP at Fangzheng and of 4410 ± 30 years BP at Shulan. The dextral offsets of the Songhua River and Second Songhua River and nearly horizontal fault striations indicate that the new activity of the YYF has been dominated by dextral strike slipping with a normal component. These new data suggest that, at least for partial sections, the YYF has been active since the Holocene, implying a potential seismic hazard. However, current quake-protection standards in this region are very low due to the previous view that the YYF fault has not been active since the late Quaternary. If an M ⩾ 7 quake takes place on this fault, it will be a devastating event. Therefore, it is necessary to conduct a detailed study on the whole YYF and to reassess its future seismic risk.  相似文献   

13.
The Jiangshan–Shaoxing Fault Zone (JSFZ) in Zhejiang Province has been proposed to represent a suture between the Yangtze and Cathaysia blocks in South China. In this study, in-situ zircon U–Pb and Hf isotopic analysis and whole-rock major- and trace-element measurement of early to middle Cretaceous felsic rocks across the fault zone were conducted to constrain the nature of the fault zone. Twelve Cretaceous granitoid bodies were sampled from the NW and SE sides of the fault zone, respectively, with composition ranging from diorite to granite (SiO2 = 56.2–76.6 wt.%). These granitoids yielded U–Pb ages ranging from 135–100 Ma, with a systematic variation in zircon Hf isotopic compositions (εHf(t) = + 6.9 to –7.0 in the NW side vs. + 1.9 to ? 12.9 in the SE side). The TDM2 values for the granitoids from the NW side are 0.34 to 1.33 Ga, with two peaks at ca. 876 and 1170 Ma respectively, whereas those from the SE side are 0.70 to 1.62 Ga, with a single peak at ca. 1126 Ma. The Hf isotopic disparity for the two sides may indicate a fundamental difference in the lower crustal compositions of the Yangtze and Cathaysia blocks, supporting that the JSFZ is possibly a suture zone between the two blocks. Our results together with the available geological data suggest that the Mesoproterozoic materials are important for both the Yangtze and Cathaysia basement and the Neoproterozoic magmatic activities were important in the Yangtze Block, possibly related to the break-up of the Rodinia supercontinent, but less significant in the Cathaysia Block. This may imply that the two blocks have not completely juxtaposed in the Neoproterozoic.  相似文献   

14.
Understanding the roles of Cenozoic strike-slip faults in SE Asia observed in outcrop onshore, with their offshore continuation has produced a variety of structural models (particularly pull-apart vs. oblique extension, escape tectonics vs. slab-pull-driven extension) to explain their relationships to sedimentary basins. Key problems with interpreting the offshore significance of major strike-slip faults are: (1) reconciling conflicting palaeomagnetic data, (2) discriminating extensional, and oblique-extensional fault geometries from strike-slip geometries on 2D seismic reflection data, and (3) estimating strike-slip displacements from seismic reflection data.Focus on basic strike-slip fault geometries such as restraining vs. releasing bends, and strongly splaying geometries approach the gulfs of Thailand and Tonkin, suggest major strike-slip faults probably do not extend far offshore Splays covering areas 10,000’s km2 in extent are characteristic of the southern portions of the Sagaing, Mae Ping, Three Pagodas and Ailao Shan-Red River faults, and are indicative of major faults dying out. The areas of the fault tips associated with faults of potentially 100 km+ displacement, scale appropriately with global examples of strike-slip faults on log–log displacement vs. tip area plots. The fault geometries in the Song Hong-Yinggehai Basin are inappropriate for a sinistral pull-apart geometry, and instead the southern fault strands of the Ailao Shan-Red River fault are interpreted to die out within the NW part of the Song Hong-Yinggehai Basin. Hence the fault zone does not transfer displacement onto the South China Seas spreading centre. The strike-slip faults are replaced by more extensional, oblique-extensional fault systems offshore to the south. The Sagaing Fault is also superimposed on an older Paleogene–Early Miocene oblique-extensional rift system. The Sagaing Fault geometry is complex, and one branch of the offshore fault zone transfers displacement onto the Pliocene-Recent Andaman spreading centre, and links with the West Andaman and related faults to form a very large pull-apart basin.  相似文献   

15.
We perform 3D modeling of earthquake generation of the Xianshuihe fault, southwestern China, which is a highly active strike-slip fault with a length of about 350 km, in order to understand earthquake cycles and segmentations for a long-term forecasting and earthquake nucleation process for a short-term forecasting. Historical earthquake data over the last 300 years indicates repeated periods of seismic activity, and migration of large earthquake along the fault during active seismic periods. To develop the 3D model of earthquake cycles along the Xianshuihe fault, we use a rate- and state-dependent friction law. After analyzing the result, we find that the earthquakes occur in the reoccurrence intervals of 400–500 years. Simulation result of slip velocity distribution along the fault at the depth of 10 km during 2694 years along the Xianshuihe fault indicates that since the third earthquake cycle, the fault has been divided into 3 parts. Some earthquake ruptures terminate at the bending part of the fault line, which may means the shape of the fault line controls how earthquake ruptures. The change of slip velocity and displacement at 10 km depth is more tremendous than the change of the shallow and deep part of the fault and the largest slip velocity occurs at the depth of 10 km which is the exact depth of the seismic zone where fast rupture occurs.  相似文献   

16.
The original ore-fluid of the Huogeqi Cu–Pb–Zn deposit in Inner Mongolia, northern China, was enriched in heavy oxygen isotopes with δ18O values ranging from 9.9 to 11.4 per mil, which is characteristic of the metamorphic devolatilization of pelitic rocks. The δD values determined by direct measurement of syn-ore hydrothermal tremolite range from − 116 to − 82 per mil, lying between the domains of typical metamorphic fluid and meteoric water, which is in equilibrium with organic matter. Oxygen and hydrogen isotope ratios indicate that the ore-fluid was derived from deep-sourced metamorphic fluid and interacted with organic-rich shale during fluid migration, which is consistent with the fluid evolution history revealed by a previous fluid inclusion study. Sulfides in the deposit are characteristically enriched in heavy S isotopes, with an average δ34S value of 13.4 ± 6.2 per mil (1σ, n = 103). The S-isotope ratios are identical to stratabound sulfides generated through the non-bacterial reduction of Neoproterozoic marine sulfate (with δ34S values of ~ 17 per mil). Previous studies on lead isotopes of sulfides revealed that the ore-forming metals (Cu, Pb, and Zn) at the Huogeqi deposit were also remobilized from a stratabound source. This source was syngenetically elevated in its Cu-, Pb-, and Zn-sulfide content as a result of submarine hydrothermal activities forming sulfide-rich layers within a rift tectonic setting. The Fe isotope ratios for sulfides are consistent with those of an intercalated iron-formation within the ore-hosting rocks, suggesting that the Fe in the sulfides was derived from local host rocks during sulfide precipitation and the Fe-rich rocks are favorable lithological units for high-grade mineralization. The heterogeneous sources of ore-fluid, S, ore-forming metals, and Fe are explained by a multistage genetic model, which is supported by the geological characteristic of the deposit. The enriched sulfides were subsequently remobilized and enriched by metamorphic devolatilization during the Permian and Triassic periods. The metamorphic ore-fluid ascended along a shear zone and interacted with organic-rich shale. Sulfides eventually precipitated within the shear zone at a shallower crustal level, especially where the shear zone intersected Fe-rich host rocks. This multistage genetic model has implications for mineral exploration. Greenschist to amphibolite facies terranes containing thick Neoproterozoic rift sequences are ideal regions for potential Cu–Pb–Zn mineralization. In particular, intercalated volcanic rocks within the rift sequences are indicative of high heat-flow and are ideal for the development of submarine hydrothermal systems. The primary structures hosting mineralization and ore shoots in the Huogeqi area are jogs in the shear zones. In addition, Fe-rich lithological units, such as iron-formations, are ideal hosts for high-grade ore.  相似文献   

17.
To study the crustal structure beneath the onshore–offshore transitional zone, a wide-angle onshore–offshore seismic experiment was carried out in northern South China Sea near Hong Kong, using large volume airgun sources at sea and seismic stations on land. The crustal velocity model constructed from traveltime fitting shows that the sedimentary thickness abruptly increases seaward of the Dangan Islands based on the characteristics of Pg and Multiple Pg, and the crustal structure beneath the sedimentary layer is relatively simple. The Moho depth is about 25–28 km along the profile and the P-wave velocity increases gradually with depth. The velocities in the upper crust range from 5.5 to 6.4 km/s, while that in the lower crust is 6.4–6.9 km/s. It also reveals a low velocity zone with a width of more than 10 km crossing the crust at about 75–90 km distance, which suggests that the Littoral Fault Zone (LFZ) exists beneath the onshore–offshore transitional zone. The magnetism anomalies, bouguer gravity anomalies and active seismic zone along the coastline imply the LFZ is a main tectonic fault in the onshore–offshore area. Combined with two previously published profiles in the continental South China (L–G profile) and in the northern margin of South China Sea (OBS1993) respectively, we constructed a land-sea super cross-section about 1000 km long. The results show the onshore–offshore transitional zone is a border separating the unstretched and the stretched continental crust. The low velocity layer (LVL) in the middle crust was imaged along L–G profile. However, the high velocity layer (HVL) in the lower crust was detected along OBS1993. By analyzing the mechanisms of the LVL in the middle crust and HVL in the base of crust, we believe the crustal structures had distinctly different attributes in the continental South China and in the northern SCS, which indicates that the LFZ could be the boundary fault between them.  相似文献   

18.
In the paper we report the state-of-the-art of seismicity study in the Baikal rift system and the general results obtained. At present, the regional earthquake catalog for fifty years of the permanent instrumental observations consists of over 185,000 events. The spatial distribution of the epicenters, which either gather along well-delineated belts or in discrete swarms is considered in detail for different areas of the rift system. At the same time, the hypocenters are poorly constrained making it difficult to identify the fault geometry. Clustered events like aftershock sequences or earthquake swarms are typical patterns in the region; moreover, aftershocks of M ⩾ 4.7 earthquakes make up a quarter of the whole catalog. The maximum magnitude of earthquakes recorded instrumentally is MLH7.6 for a strike-slip event in the NE part of the Baikal rift system and MLH6.8 for a normal fault earthquake in the central part of the rift system (Lake Baikal basin). Predominant movement type is normal faulting on NE striking faults with a left lateral strike-slip component on W–E planes. In conclusion, some shortcomings of the seismic network and data processing are pointed out.  相似文献   

19.
Palaeoseismological and morphotectonic analyses enable us to define a 400-m-wide actively deformed zone associated with the active Eliki normal fault, central Greece, bounded on the south by a second-order fault and on the north by a composite and prominent fault scarp. This scarp is further analysed by trenching. Based on colluvium stratigraphy, displacement of distinct horizons and deposition of sedimentary layers, three faulting events have been identified along four fault strands affecting unconsolidated sediments in the trench. The two younger events, with throws of 0.93 and 1.37 m, respectively, the third event, with a throw of 0.44 m, and the penultimate 373 BC event suggest a variable seismic history.The entire alluvial plain of the Kerynitis and Vouraikos rivers, which cross the Eliki fault, has subsided at a rate of 1.4 mm/year, resulting in the burial of the Late Hellenistic–Roman occupation horizons under 3 m of fluvial and colluvial sediments in places.Extension in the broader area is accommodated by the seismically active Eliki and Egion faults. Structural and palaeoseismological analysis of those two faults indicates that they accommodate 1.5 mm/year, or about 10% of the geodetically estimated extension of up to 13 mm/year.  相似文献   

20.
《Gondwana Research》2014,25(3-4):886-901
The Late Mesoproterozoic (1085–1040 Ma) Ngaanyatjarra Rift, previously referred to as the Giles Event, is the dominant component of the Warakurna Large Igneous Province (LIP) that affected much of central and western Australia. This rift is well preserved and provides excellent examples of rift structure at a variety of crustal levels and times in the rift's evolution. Geological knowledge is integrated with geophysical interpretations and models to understand the crustal structure and evolution of this rift. Two phases are identified: an early rift stage (1085–1074 Ma) that is characterised by voluminous magmatism within the upper crust and relatively little tectonic deformation; and a late rift stage that is characterised by tectonic deformation, synchronous with the deposition of a thick pile of volcanic and sedimentary rocks (1074–1040 Ma). Compared to modern rift examples, this rift is unusual in that the crust was thickened by ~ 15 km and overall extension was very limited. However, its structure and evolution are very similar to the near-contemporaneous Midcontinent Rift, which shows the addition of a similar quantity of magmatic material as well as crustal thickening and limited extension. For these Mesoproterozoic rifts, we suggest that magmatism was the dominant process, and that the extension observed was a response to magmatism-induced crustal thickening and the gravitational collapse of the crustal column. Other Proterozoic rifts show similar characteristics (e.g. Transvaal Rift), whereas most Phanerozoic rifts are dissimilar, showing instead a dominance of extension, with magmatism largely a result of this extension. This change in the style of rifting from the Precambrian to the Phanerozoic may relate to the influence of a typically cooler and stronger lithosphere, which has caused stronger strain localisation and a greater role for extension as the controlling factor in rift evolution.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号