共查询到20条相似文献，搜索用时 93 毫秒
1.
The Yuchiling Mo deposit, East Qinling, China, belongs to a typical porphyry Mo system associated with high-K calc-alkaline intrusions. The pure CO2 (PC), CO2-bearing (C), aqueous H2O-NaCl (W), and daughter mineral-bearing (S) fluid inclusions were observed in the hydrothermal quartz. Based on field investigations, petrographic, microthermometric and LA-ICP-MS studies of fluid inclusions, we develop a five-stage fluid evolution model to understand the ore-forming processes of the Yuchiling deposit. The earliest barren quartz ± potassic feldspar veins, developed in intensively potassic alteration, were crystallized from carbonic-dominant fluids at high temperature (> 416 °C) and high pressure (> 133 MPa). Following the barren quartz ± potassic feldspar veins are quartz-pyrite veins occasionally containing minor K-feldspar and molybdenite, which were formed by immiscible fluids at pressures of 47–159 MPa and temperatures of 360–400 °C. The fluids were characterized by high CO2 contents (approximately 8 mol%) and variable salinities, as well as the highest Mo contents that resulted in the development of quartz-molybdenite veins. The quartz-molybdenite veins, accounting for > 90% Mo in the orebody, were also formed by immiscible fluids with lower salinity and lower CO2 content of 7 mol%, at temperatures of 340–380 °C and pressures of 39–137 MPa, as constrained by fluid inclusion assemblages. After the main Mo-mineralization, the uneconomic Cu-Pb-Zn mineralization occurred, as represented by quartz-polymetallic sulfides veins consisting of pyrite, molybdenite, chalcopyrite, digenite, galena, sphalerite and quartz. The quartz-polymetallic sulfide veins were formed by fluids containing 5 mol% CO2, with minimum pressures of 32–110 MPa and temperatures of 260–300 °C. Finally, the fluids became dilute (5 wt.% NaCl equiv) and CO2-poor, which caused the formation of late barren quartz ± carbonate ± fluorite veins at 140–180 °C and 18–82 MPa.It is clear that the fluids became more dilute, CO2-poor, and less fertile, with decreasing temperature and pressure from quartz-pyrite to late barren veins. Molybdenite and other sulfides can only be observed in the middle three stages, i.e., quartz-pyrite, quartz-molybdenite and quartz-polymetallic sulfide veins. These three kinds of veins are generally hosted in potassic altered rocks with remarkable K-feldspathization, but always partly overprinted by phyllic alteration. The traditional porphyry-style potassic–phyllic–propylitic alteration zoning is not conspicuous at Yuchiling, which may be related to, and characteristic of, the CO2-rich fluids derived from the magmas generated in intercontinental collision orogens.Among the fluid inclusions at Yuchiling, only the C-type contains maximum detectable Mo that gradationally decreases from 73 ppm in quartz-pyrite veins, through 19 ppm in quartz-molybdenite veins, and to 13 ppm in quartz-polymetallic sulfide veins, coinciding well with the decreasing CO2 contents from 8 mol%, through 7 mol%, to 5 mol%, respectively. Hence it is suggested that decreasing CO2 possibly results in decreasing Mo concentration in the fluids, as well as the precipitation of molybdenite from the fluids. This direct relationship might be a common characteristic for other porphyry Mo systems in the world.The Yuchiling Mo deposit represents a new type Mo mineralization, with features of collision-related setting, high-K calc-alkaline intrusion, CO2-rich fluid, and unique wall-rock alterations characterized by strong K-feldspathization and fluoritization. 相似文献
2.
The Yinjiagou Mo–Cu–pyrite deposit of Henan Province is located in the Huaxiong block on the southern margin of the North China craton. It differs from other Mo deposits in the East Qingling area because of its large pyrite resource and complex associated elements. The deposit’s mineralization process can be divided into skarn, sulfide, and supergene episodes with five stages, marking formation of magnetite in the skarn episode, quartz–molybdenite, quartz–calcite–pyrite–chalcopyrite–bornite–sphalerite, and calcite–galena–sphalerite in the sulfide episode, and chalcedony–limonite in the supergene episode. Re–Os and 40Ar–39Ar dating indicates that both the skarn-type and porphyry-type orebodies of the Yinjiagou deposit formed approximately 143 Ma ago during the Early Cretaceous. Four types of fluid inclusions (FIs) have been distinguished in quartz phenocryst, various quartz veins, and calcite vein. Based on petrographic observations and microthermometric criteria the FIs include liquid-rich, gas-rich, H2O–CO2, and daughter mineral-bearing inclusions. The homogenization temperature of FIs in quartz phenocrysts of K-feldspar granite porphyry ranges from 341 °C to >550 °C, and the salinity is 0.4–44.0 wt% NaCl eqv. The homogenization temperature of FIs in quartz–molybdenite veins is 382–416 °C, and the salinity is 3.6–40.8 wt% NaCl eqv. The homogenization temperature of FIs in quartz–calcite–pyrite–chalcopyrite–bornite–sphalerite ranges from 318 °C to 436 °C, and the salinity is 5.6–42.4 wt% NaCl eqv. The homogenization temperature of FIs in quartz–molybdenite stockworks is in a range of 321–411 °C, and the salinity is 6.3–16.4 wt% NaCl eqv. The homogenization temperature of FIs in quartz–sericite–pyrite is in a range of 326–419 °C, and the salinity is 4.7–49.4 wt% NaCl eqv. The ore-forming fluids of the Yinjiagou deposit are mainly high-temperature, high-salinity fluids, generally with affinities to an H2O–NaCl–KCl ± CO2 system. The δ18OH2O values of ore-forming hydrothermal fluids are 4.0–8.6‰, and the δDV-SMOW values are between −64‰ and −52‰, indicating that the ore-forming fluids were primarily magmatic. The δ34SV-CDT values of sulfides range between −0.2‰ and 6.3‰ with a mean of 1.6‰, sharing similar features with deeply sourced sulfur, implying that the sulfur mainly came from the lower crust composed of poorly differentiated igneous materials, but part of the heavy sulfur came from the Guandaokou Group dolostone. The 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb values of sulfides are in the range of 17.331–18.043, 15.444–15.575, and 37.783–38.236, respectively, which is generally consistent with the Pb isotopic signature of the Yinjiagou intrusion, suggesting that the Pb chiefly originated from the felsic–intermediate intrusive rocks in the mine area, with a small amount of lead from strata. The Yinjiagou deposit is a porphyry–skarn deposit formed during the Mesozoic transition of a tectonic regime that is EW-trending to NNE-trending, and the multiepisode boiling of ore-forming fluids was the primary mechanism for mineral deposition. 相似文献
3.
The Dabu Cu-Mo porphyry deposit is situated in the southern part of the Lhasa terrane within the post-collisional Gangdese porphyry copper belt (GPCB). It is one of several deposits that include the Qulong and Zhunuo porphyry deposits. The processes responsible for ore formation in the Dabu deposit can be divided into three stages of veining: stage I, quartz–K-feldspar (biotite) ± chalcopyrite ± pyrite, stage II, quartz–molybdenite ± pyrite ± chalcopyrite, and stage III, quartz–pyrite ± molybdenite. Three types of fluid inclusions (FIs) are present: liquid-rich two-phase (L-type), vapor-rich two-phase (V-type), and solid bearing multi-phase (S-type) inclusions. The homogenization temperatures for the FIs from stages I to III are in the ranges of 272–475 °C, 244–486 °C, and 299–399 °C, and their salinities vary from 2.1 to 49.1, 1.1 to 55.8, and 2.9 to 18.0 wt% NaCl equiv., respectively. The coexistence of S-type, V-type and L-type FIs in quartz of stage I and II with similar homogenization temperatures but contrasting salinities, indicate that fluid boiling is the major factor controlling metal precipitation in the Dabu deposit. The ore-forming fluids of this deposit are characterized by high temperature and high salinity, and they belong to a H2O–NaCl magmatic–hydrothermal system. The H–O–S–Pb isotopic compositions indicate that the ore metals and fluids came primarily from a magmatic source linked to Miocene intrusions characterized by high Sr/Y ratios, similar to other porphyry deposits in the GPCB. The fluids forming the Dabu deposit were rich in Na and Cl, derived from metamorphic dehydration of subducted oceanic slab through which NaCl-brine or seawater had percolated. The inheritance of ancient subduction-associated arc chemistry, without shallow level crustal assimilation and/or input of the meteoric water, was responsible for the generation of fertile magma, as well as CO2-poor and halite-bearing FIs associated with post-collisional porphyry deposits. The estimated mineralization depths of Qulong, Dabu and Zhunuo deposits are 1.6–4.3 km, 0.5–3.4 km and 0.2–3.0 km, respectively, displaying a gradual decrease from eastern to western Gangdese. Deep ore-forming processes accounted for the generation of giant-sized Qulong deposit, because the exsolution of aqueous fluids with large fraction of water and chlorine in deep or high pressure systems can extract more copper from melts than those formed in shallow systems. However, the formation of small-sized Dabu deposit can be explained by a single magmatic event without additional replenishment of S, metal, or thermal energy. In addition, the ore-forming conditions of porphyry Cu–Mo deposits in GPCB are comparable to those of porphyry Cu ± Au ± Mo deposits formed in oceanic subduction-related continental or island arcs, but differ from those of porphyry Mo deposit formed in the Dabie-Qinling collisional orogens. The depth of formation of the mineralization and features of primary magma source are two major controls on the metal types and ore-fluid compositions of these porphyry deposits. 相似文献
4.
The Sandaowanzi epithermal gold deposit (0.5 Moz or ca. 14 tons), located at the northern edge of the Great Xing'an range, NE China, is unique in that nearly all the gold (> 95%) is contained in gold tellurides mostly in bonanza grade ore shoots (the highest grade being up to 20,000 g/t). The bonanza ores are hosted in the central parts of large-scale (> 3 m wide, 200 m long) quartz veins which crosscut Early Cretaceous andesitic trachyte and trachytic andesite, and are, in turn, crosscut by diabase dykes of similar age. There are two ore types: low-grade disseminated ores and high-grade vein ores. In the former, very fine grains of Ag-rich tellurides (mainly hessite and petzite) coexist with sulfides (pyrite, sphalerite, galena and chalcopyrite), occurring as disseminated grains or sometimes as grain aggregates. In the high-grade vein ores, coarse-grained Au–(Ag)–tellurides (calaverite, sylvanite, krennerite, and petzite) form a major part of quartz–telluride veins. Chalcopyrite forms separate monomineralic veins emplaced within the quartz–telluride veins. Spectacular textures among coarse-grained (up to 3 cm in diameter) tellurides, and micron-scale bamboo shoot-like grains are observed. Two- and three-phase telluride symplectites are common in the vein ores.Fluid inclusion studies suggest that the mineralizing fluids are a mixture of magmatic and meteoric fluids, that homogenized in the temperature range of 260–280 °C. Sulfur isotope compositions of pyrite and chalcopyrite (δ34S − 1.64 to 1.91‰) support the origin of fluids from a deep source. It is suggested that faulting, temperature changes and variation in fS2 and fTe2 were major factors contributing to the two main types of mineralization and the differences between them. Early rapid cooling and subsequent slow cooling of the later fluids along fault and fracture zones were instrumental in formation of the two superposed ore types. Open-space filling and crack-sealing along fractures predominates over replacement during telluride mineralization. The Sandaowanzi deposit is a unique bonanza-grade accumulation of gold tellurides genetically related to subalkaline magmatism, which was genetically associated with Early Cretaceous regional extension. 相似文献
5.
The Aitik Cu–Au–Ag deposit in the Gällivare area in northern Sweden is Sweden's largest sulphide mine with an annual production of 35 Mt of ore, and the biggest open pit operation in northern Europe. It is proposed in the present study that the Aitik deposit represents a Palaeoproterozoic, strongly metamorphosed porphyry copper deposit that was affected ca. 100 Ma later by a regional IOCG-type hydrothermal event. Consequently, the Aitik deposit might represent a mixed ore system where an early copper mineralisation of porphyry type has been overprinted by later regional IOCG mineralisation.Several attempts have previously been made to genetically classify the Aitik Cu–Au–Ag deposit as a distinct ore type. New geochemical, petrographic, structural, and fluid inclusion results combined with published data have provided the opportunity to present new ideas on the genesis and evolution of the Aitik Cu–Au–Ag deposit. The emplacement of a ca. 1.9 Ga quartz monzodiorite that host the ore at Aitik was related to subduction processes and volcanic arc formation, and synchronous with quartz vein stockwork formation and porphyry copper mineralisation. Highly saline aqueous (38 wt.% NaCl) fluid inclusions in the stockwork veins suggest entrapment at 300 °C and a pressure of nearly 3 kbar, a high pressure for a typical porphyry copper ore, but consistent with conditions at associated deep root zones of intrusion-related magmatic–hydrothermal systems. The highly saline fluid formed disseminated and vein-type ore of mainly chalcopyrite and pyrite within comagmatic volcaniclastic rocks, and caused potassic alteration (biotite, microcline) of the host rocks. The early porphyry copper mineralising event was followed, and largely overprinted, by CO2 and aqueous medium- to high-salinity (16–57 wt.% salts) fluids related to a ca. 1.8 Ga tectonic and metamorphic event (peak conditions 500–600 °C and 4–5 kbar). Extensive deformation of rocks and redistribution of metals occurred. Magnetite enrichment locally found within late veins, and late amphibole–scapolite and K feldspar alterations within the deposit, are some of the features at Aitik implying that aqueous fluids responsible for IOCG-mineralisation (200–500 °C and ~ 1 kbar) and extensive Na–Ca alteration in the region during the 1.8 Ga tectonic event also affected the Aitik rocks, possibly leading to addition of copper ± gold. 相似文献
6.
The Lermontovskoe deposit (∼48 Kt WO3; average 2.6% WO3, 0.24% Cu, 0.23 g/t Au) is situated in a W-Sn-Au metallogenic belt that formed in a collisional tectonic environment. This tungsten skarn deposit has a W-Au-As-Bi-Te-Sb signature that suggests an affinity with reduced intrusion-related Au deposits. The deposit is associated with an intrusion that is part of the ilmenite-series, high-K peraluminous granitoid (granodiorite to granite) suite. These rocks formed via mantle magma-induced melting of crustal sources.The deposit comprises reduced-type, pyroxene-dominated prograde and retrograde skarns followed by hydrosilicate (amphibole-chlorite-pyrrhotite-scheelite-quartz) and phyllic (muscovite/sericite-carbonate-albite-quartz-scheelite-sulfide, with abundant apatite) alteration assemblages. Fluid inclusions from the skarn assemblages indicate high-temperature (>500 °C), high-pressure (1400–1500 bars) and high-salinity (53–60 wt% NaCl-equiv.) magmatic-hydrothermal fluids. They were post-dated by high-carbonic, methane-dominate, low-salinity fluid at the hydrosilicate alteration stage. These fluids boiled at 360–380 °C and 1300–1400 bars. The subsequent phyllic alteration started again with a high-temperature (>450 °C), high-pressure (1000–1100 bars) and high-salinity (42–47 wt% NaCl-equiv.) fluid, with further incursion of high-carbonic, methane-dominated, low-salinity fluid that boiled at 390–420 °C and 1150–1200 bars. The latest phyllic alteration included the lower-temperature (340–360 °C), lower pressure (370–400 bars) high-carbonic, methane-dominated (but with higher CO2 fraction), low-salinity fluid, and then the low-temperature (250–300 °C) H2O-CO2-CH4-NaCl fluid, with both fluids boiled at the deposit level. The high-salinity aqueous fluids are interpreted to have come from crystallizing granitoid magma, whereas the reduced high-carbonic fluids probably came from a deeper mafic magma source. Both of these fluids potentially contributed to the W-Au-As-Bi-Te-Sb metal budget. Decreasing temperatures coupled with high aCa2+ and fluid boiling promoted scheelite deposition at all post-skarn hydrothermal stages.The deposit is characterized by limited downdip extent of mineralized zones and abundant coarse-grained muscovite-quartz (+apatite, scheelite) aggregates that formed at the phyllic alteration stage. Together with presence of high-temperature, high-pressure and high-salinity fluids directly exsolving from crystallizing magma, this suggests a root level of the mineralized magmatic-hydrothermal system of reduced W skarn deposits. 相似文献
7.
A new high sulfidation epithermal Cu–Au occurrence (Nadun) has been discovered adjacent to the Cretaceous Duolong porphyry Cu–Au deposit within the Bangong–Nujiang metallogenic belt, central Tibet. The Nadun Cu–Au mineralization is hosted in a tectonic–hydrothermal breccia with advanced argillic alteration, which occurs above sandstone, associated with quartz–pyrite veins. The granodiorite porphyry with strong argillic alteration yields a zircon U–Pb age of 119.1 ± 1.3 Ma, whereas the weakly argillic granodiorite porphyry intruded into the breccia has a younger age of 116.1 ± 1.3 Ma. This indicates that Cu–Au epithermal mineralization likely occurred between ~ 116 Ma and ~ 119 Ma, consistent with the duration of magmatic–hydrothermal activity at Duolong (~ 115–118 Ma), and providing evidence that Nadun and Duolong were formed during the same event. Moreover, the Nadun and Duolong porphyries have similar Hf isotopic compositions (εHf(t) values ranging from − 8.8 to 8.1; mean = 5.0 ± 1.1, n = 32), likely indicating that the deposits are comagmatic. In addition, boiling assemblages in vapor-rich inclusions coexisting with brines occur in early stage quartz–pyrite veins, and likely record phase separation at a temperature of > 550–300 °C and pressure of 700–110 bars. Most liquid-rich fluid inclusions formed at the breccia stage show similar salinity (1.7–19.3 wt.% NaCl equiv) to vapor-rich inclusions from the underlying quartz–pyrite veins, likely indicating vapor contraction during cooling at elevated presssure. This suggests that quartz–pyrite veins may act as conduits for ore-forming fluid traveling from the porphyry to the epithermal hydrothermal system. O and H isotopic compositions (δ18Ofluid = 0.42–9.71‰ and δD = − 102 to − 66‰) suggest that ore-forming fluids are dominantly from a magmatic source with a minor addition of meteoric water at a later stage. The S and Fe isotope compositions of sulfides (δ34S = − 5.9 to 0.5‰ and δ57Fe = − 2.15 to 0.17‰) decrease from the quartz–pyrite vein to breccia ore, indicating that ore-forming fluids gradually become SO42-enriched and relatively oxidized. This body of evidence suggests that the Nadun Cu–Au mineralization may represent the root of a high sulfidation epithermal deposit. 相似文献
8.
The Xiongcun district, located in the western segment of the Gangdese porphyry copper belt (GPCB), hosts the only known Jurassic mineralization in the GPCB, Tibet, PRC. The No. I deposit in the Xiongcun district is related to the Middle Jurassic quartz diorite porphyry (167–161 Ma) and the mineralization was formed at ca. 161.5 ± 2.7 Ma. Ore-bearing Middle Jurassic quartz diorite porphyry emplaced into the Early Jurassic volcano-sedimentary rock sequences of the Xiongcun Formation. Veinlets and disseminated mineralization developed within the Middle Jurassic quartz diorite porphyry and the surrounding metamorphosed tuff, hosting a measured and indicated resource of 1.04 Mt copper, 143.31 t gold and 900.43 t silver with an average grade of 0.48% copper, 0.66 g/t gold, and 4.19 g/t silver. The mineralization can be assigned to four stages, including three main stages of hypogene mineralization and one epigenetic stage. The main alteration associated with mineralization is potassic. Seven mineralization-related hydrothermal veins have been recognized, including quartz–sulfide, biotite–sulfide, magnetite–sulfide, quartz–molybdenite–sulfide, chalcopyrite–pyrite–pyrrhotite, pyrite and polymetallic veins. The S and Pb isotopic compositions of the ore sulfides and the Re contents of the molybdenite suggest a mantle source for the ore-forming materials with minor contamination from the subducted sediments. Hydrogen and oxygen isotope compositions of quartz in the ores suggest that both magmatic and meteoric waters were involved in the ore-forming process. The ore-bearing porphyry (167–161 Ma) and ore-forming (161.5 ± 2.7 Ma) ages of the No. I deposit correspond to the time of northward subduction of Neo-Tethys oceanic slab. The geochemical data of the ore-bearing porphyry indicate that the No. I deposit formed in an intra-oceanic island arc setting and the ore-bearing porphyry originated from the partial melting of mantle with limited contribution of subducted sediments. The genesis of the ore-bearing porphyry and No. I deposit is interpreted as being related to northward intra-oceanic subduction of Neo-Tethys oceanic slab in the Middle Jurassic time (167–161 Ma). 相似文献
9.
《Chemie der Erde / Geochemistry》2016,76(3):391-404
The quartz veins and pegmatites of the Sierra de Comechingones (Sierras de Córdoba, NE Argentina) belong to the Comechingones Pegmatite field (CPF). For the quartz veins and the zoned pegmatites related parental granites are missing. The country rock of the quartz veins are mylonitic augengneisses in granulite to upper amphibolite facies. Field relations, microscopy, cathodoluminescence, radiometric age data, fluid inclusion, chemical and isotopic composition and literature define the quartz veins as synorogenic formed during the high-temperature phase of the Famatinian (480–460 Ma) event. During the Famatinian up to the Achalian (382–366 Ma) event the synorogenic quartz veins were subjected to high temperature ductile deformation documented by folding, boudinage and finally brittle shearing. K-Ar ages of illite from the shear zones of about 166 Ma document the final cooling of the Sierras Pampeanas below 100 °C. The long lasting thermal and deformational history of the study area is reflected by very different populations of fluid inclusions in vein quartz with remarkably high contents of thermogenic hydrocarbons in the early-formed fluid inclusions. LA–ICP–MS analysis reveals very low lattice-bound trace element contents, i.e. high purity quartz. 相似文献
10.
The Weilasituo and Bairendaba Zn–Pb–Ag–Cu–(Sn–W) sulphide deposits are located in the southern part of Great Xing'an Range of Inner Mongolia in China. The deposits are located at shallow depths in the newly discovered Weilasituo porphyry hosting Sn–W–Rb mineralization. The mineralization at Weilasituo and Bairendaba consist of zoned massive sulphide veins within fractures cutting the Xilinhot Metamorphic Complex and quartz diorite. The Weilasituo deposit gradually zones from the Cu-rich Zn–Cu sulphide mineralization in the west to Zn-rich Zn–Cu sulphide mineralization in the east. The Bairendaba deposit has a Cu-bearing and Zn-rich core through a transitional zone devoid of copper to an outer zone of Zn–Pb–Ag mineralization. Three main veins contain more than 50 wt.% of the contained metal in the two deposits with their metal ratios displaying a systematic and gradual increase in Zn/Cu, Pb/Zn and Ag/Zn ratios from the western part of Weilasituo to the eastern part of Bairendaba.Three stages of vein-type mineralization are recognized. Early, sub-economic mineralization consists of a variable proportion of euhedral arsenopyrite, pyrite, quartz, and rare wolframite, scheelite, cassiterite, magnetite and cobaltite. This was succeeded by main stage mineralization with economic concentration of zoned Cu, Zn, Pb and Ag sulphide minerals along strike within the veins. The zones consist of the assemblages: (1) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–quartz–fluorite) at west Weilasituo; (2) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) at east Weilasituo; (3) pyrrhotite–Fe-rich sphalerite–chalcopyrite(–galena–tetrahedrite–quartz–fluorite) in the centre of Bairendaba; (4) pyrrhotite–Fe-rich sphalerite–galena(–chalcopyrite–tetrahedrite–quartz–fluorite) in the transition zone of Bairendaba; and (5) pyrrhotite–Fe-rich sphalerite–galena–tetrahedrite(–chalcopyrite–falkmanite–argentite–pyrargyrite–quartz–fluorite) in the outer zone at Bairendaba. Post-main ore stage is devoid of sulphides and characterized overprinting of fluorite, sericite, chlorite, illite, kaolinite and calcite.Zircon SHRIMP U–Pb dating, Zircon LA–ICP–MS U–Pb dating, molybdenite Re–Os isochron dating, and muscovite Ar–Ar dating indicate the Beidashan granitic batholith was intruded at 140 ± 3 Ma (MSWD = 3.3), the porphyritic monzogranite from marginal facies of the Beidashan batholith was intruded at 139 ± 2 Ma (MSWD = 0.75), the mineralized quartz porphyry was intruded at 135 ± 2 Ma (MSWD = 0.91), the greisen mineralization occurred at 135 ± 11 Ma (MSWD = 7.2), and the post-main ore stage muscovite deposited at 129.5 ± 0.9 Ma. The new geochronology data show the porphyry Sn–W–Rb and vein-type sulphide mineralization are contemporaneous with granitic magmatism in the region.The metal zonation at the Weilasituo and Bairendaba deposits is a result of progressive metal deposition. This was during the evolution of a metal-bearing fluid along the strike of the veins and during the main stage of ore formation at the upper part of the deep-seated porphyry Sn–W–Rb system. This progressive zonation indicates that the deposits represent end-numbers formed from one ore-forming fluid, which moved from west to east from the porphyry. The metal zonation patterns of the major veins are consistent with metal-bearing fluid entering the system with the precipitation of chalcopyrite proximally and sphalerite, galena and Ag-bearing minerals more distally. We show that the mechanism of metal deposition is therefore controlled by thermodynamic conditions resulting in the progressive separation of sulphides from the metal-bearing fluid. The temperature gradient between the inflow zone and the outflow zone appears to be one of the key parameters controlling the formation of the metal zonation pattern. The sulphide precipitation sequence is consistent with a low fS2 and low fO2 state of the acidic metal-bearing fluid. The metal zonation pattern provides helpful clues from which it is possible to establish the nature of fluid migration and metal deposition models to locate a possible porphyry mineralization at depth in the Great Xing'an Range, which is consistent with the geology of the newly discovered porphyry Sn–W–Rb system. 相似文献
11.
Arapucandere is one of a number of similar Cu–Zn–Pb ± Au–Ag epithermal deposits in the Biga Peninsula, which are mineralogically and tectonically similar. Fluid inclusions have very low salinities between 1.7 and 0 wt.% NaCl and a wide range of temperatures from ~ 360 to 160 °C. There was extensive boiling and “flashing” of the hydrothermal fluids which initiated mineral deposition. The range of temperatures is consistent with emplacement of the veins at ~ 700 m depth, with the pressure decreasing from near lithostatic to near hydrostatic and a decrease in temperature to ~ 250 °C due to adiabatic expansion of the fluids. There is evidence of a limited amount of boiling, but the temperature and pressure decrease was close to the liquid–vapour curve. Flashing of the fluids was caused by sudden drops to sub-hydrostatic pressures and even lower temperatures. Mineralization was caused by these pressure related temperature decreases as there is no evidence of cooling and dilution of the ore-fluids. δ34S values of sulphides indicate a magmatic source but the more negative than usual values also suggest boiling affected isotopes. δD and δ18O of the fluids indicate a mixing between meteoric waters and magmatic fluids, with the large range of δD due to boiling. LA-ICP-MS analyses of fluid inclusions reveal high Cu–Zn–Pb concentrations in the fluids, despite their low salinity, transported as chloride complexes. Exceptional pressure and temperature decrease causing the fluids to “flash” was likely to have been in response to earthquakes. 相似文献
12.
The Fuxing porphyry Cu deposit is a recently discovered deposit in Eastern Tianshan, Xinjiang, northwestern China. The Cu mineralization is associated with the Fuxing plagiogranite porphyry and monzogranite, mainly presenting as various types of hydrothermal veins or veinlets in alerted wall rocks, with potassic, chlorite, phyllic, and propylitic alteration developed. The ore-forming process can be divided into four stages: stage I barren quartz veins, stage II quartz–chalcopyrite–pyrite veins, stage III quartz–polymetallic sulfide veins and stage IV quartz–calcite veins. Four types of fluid inclusions (FIs) can be distinguished in the Fuxing deposit, including hypersline (H-type), vapor-rich two-phase (V-type), liquid-rich two-phase (L-type), and trace amounts of pure vapor inclusions (P-type), but only the stage I quartz contains all types of FIs. The stages II and III quartz have two types of FIs, with exception of H- and P-types. In stage IV quartz minerals, only the L-type inclusions can be observed. The FIs in quartz of stages I, II, III and IV are mainly homogenized at temperatures of 357–518 °C, 255–393 °C, 234–322 °C and 145–240 °C, with salinities of 1.9–11.6 wt.% NaCl equiv., 1.6–9.6 wt.% NaCl equiv., 1.4–7.7 wt.% NaCl equiv. and 0.9–3.7 wt.% NaCl equiv., respectively. The ore-forming fluids of the Fuxing deposit are characterized by high temperature, moderate salinity and relatively oxidized condition. Carbon, hydrogen and oxygen isotopic compositions of quartz indicate that the ore-forming fluids were gradually evolved from magmatic to meteoric in origin. Sulfur and lead isotopes suggest that the ore-forming materials were derived from a deep-seated magma source. The Cu mineralization in the Fuxing deposit occurred at a depth of ~ 1 km, and the changes of oxygen fugacity, decompression boiling, and local mixing with meteoric water were most likely critical for the formation of the Fuxing Cu deposit. 相似文献
13.
The Kalatag Cu–Zn–Au district contains a number of economically important Cu deposits in eastern Tianshan in Xinjiang, NW China. Due to the lack of precise mineralization ages, the metallogenesis of this area has long been a matter of debate. In this study, chalcopyrite Re–Os isotope methods are used to date the South Meiling Cu–Zn and Hongshi Cu deposits in the eastern part of Kalatag area.The South Meiling Cu–Zn deposit is hosted in volcanic-sedimentary rocks of the Late Ordovician to Early Silurian Daliugou Formation. The deposit consists of two parts: a concordant massive sulfide ores and discordant vein-type ores located in the footwall strata. The principal ore minerals are pyrite, chalcopyrite, sphalerite, minor tetrahedrite, galena and pyrrhotite. Gangue minerals include quartz, sericite and barite, and minor chlorite, plagioclase and carbonate minerals. The Hongshi Cu deposit represents a hydrothermal vein system hosted in the mafic volcanic rocks of Daliugou Formation. The orebodies are associated with quartz veins and controlled by subsidiary faults of the Kalatag fault. The ore-forming process can be divided into the early, middle and late stages and is characterized by quartz–pyrite, quartz–chalcopyrite–pyrite and quartz–carbonate–gypsum veins, respectively.Re–Os analyses of chalcopyrite from the South Meiling Cu–Zn deposit yield an isochron age of 434.2 ± 3.9 Ma and initial 187Os/188Os ratio of 0.647 ± 0.098 (MSWD = 0.59). Re–Os analyses of chalcopyrite from the Hongshi Cu deposit yield an isochron age of 431.8 ± 2.7 Ma and initial 187Os/188Os ratio of − 0.165 ± 0.075 (MSWD = 0.77). Since chalcopyrite is the primary copper mineral, we interpret these isochron ages as the timing of Cu mineralization, based on field geology and petrographic evidence. These results suggest that the Re–Os ages presented here provide, for the first time, a direct constraint on an early Paleozoic Cu mineralization event of the eastern Tianshan Orogen. The high initial 187Os/188Os ratios (0.647 ± 0.098) ratio of ~ 434 Ma chalcopyrite from the South Meiling deposit suggest that the metal was sourced from a two end-member mixing of crust and mantle materials. Moreover, we propose that the VMS mineral system and hydrothermal vein system of the Kalatag district were related to the south-dipping subduction of the Kalamaili oceanic plate during the Late Ordovician–Silurian. 相似文献
14.
The Urals is a complex fold belt, which underwent long geological evolution. The formation of most gold deposits in the Urals is related to the collision stage. In this paper, we review some relatively small listvenite-related gold deposits, which are confined to the large Main Uralian fault zone and some smaller faults within the Magnitogorsk zone. The Mechnikovskoe, Altyn-Tash, and Ganeevskoe deposits are studied in detail in this contribution. They comprise the ore clusters along with other numerous small gold deposits, and constituted the sources for the gold placers exploited in historical time. The gold is hosted by metasomatites (listvenites, beresites) and quartz veins with economic gold grades (up to 20 g/t Au). Listvenites are developed after serpentinites and composed of quartz, fuchsite, and carbonates (magnesite, dolomite) ± albite. Volcanic and volcanoclastic rocks are altered to beresites, consisting of sericite, carbonates (dolomite, ankerite), quartz and albite. Pyrite and chalcopyrite are major ore minerals associated with gold; pyrrhotite, Ni sulfides, galena, sphalerite, arsenopyrite and Au-Ag tellurides are subordinate and rare. Gold in these deposits is mostly high-fineness (>900‰). The lower fineness (∼800‰) is typical of gold in assemblage with polymetallic sulfides and tellurides. The ores have been formed from the NaCl–CO2–H2O ± CH4 fluids of low (∼2 wt% NaCl-equiv.) to moderate (8–16 wt% NaCl-equiv.) salinity at temperatures of 210–330 °C. The oxygen isotopic composition of quartz (δ18O) varies from 14.7 to 15.4‰ (Mechnikovskoe deposit), 13.2 to 13.6‰ (Altyn-Tash deposit) and 12.0 to 12.7‰ (Ganeevskoe deposit). The oxygen isotopic composition of albite from altered rocks of the Ganeevskoe deposit is 10.1‰. The calculated δ18OH2O values of the fluid in equilibrium with quartz are in a range of 5.7–6.3, 4.2–4.6 and 6.3–6.7‰ respectively, and most likely indicate a magmatic fluid source. 相似文献
15.
The Zhazixi Sb–W deposit in the Xuefeng uplift, South China, exhibits a unique metal association of W and Sb, where the W orebodies are hosted by interlayer fractures and the Sb orebodies are contained within NW-trending faults. This study proposes that the W and Sb mineralization took place in two separate periods. The mineral paragenesis of the W mineralization reveals a mass of quartz, scheelite and minor calcite. The mineral assemblage of the Sb mineralization developed after W mineralization and consists of predominantly quartz and stibnite, and small amounts of native Sb, berthierite, chalcostibnite, pyrite, and chalcopyrite. Fluid inclusions in quartz and coexisting scheelite are dominated by two-phase, liquid-rich, aqueous inclusions at room temperature. Microthermometric studies suggest that ore-forming fluids for W mineralization are characterized by moderate temperatures (170–270 °C), low salinity (3–7 wt% NaCl equiv.), low density (0.75–0.95 g/cm3), and moderate to high pressure (57.2–99.7 MPa) and these fluids experienced a cooling and dilution evolution during W mineralization. Ore-forming fluids for Sb mineralization are epithermal types with low temperatures (150–230 °C), low salinity (4–6 wt% NaCl equiv.), moderate density (0.82–0.94 g/cm3), and high pressure (42.2–122.5 MPa) and these fluids display an evident decline in homogenization temperature during Sb mineralization. Laser Raman analyses of the vapor phase indicate that the ore-forming fluids for both W and Sb mineralization contain a small amount of CO2.The ore-forming fluids for Sb mineralization are identified as predominantly originating from the continental crust, as suggested by the low 3He values (0.009 × 10−12 cc.STP/g) and 3He/4He ratios (0.002–0.056 Ra) as well as high 36Ar values (1.93 × 10−9 cc.STP/g) and 40Ar/36Ar ratios (909.5–2279.7). The source of S is identified to be the Neoproterozoic Wuqiangxi Formation, as traced by the δ34SV-CDT values of stibnite (3.1–9.4‰). The 208Pb/204Pb (37.643–40.222), 207Pb/204Pb (15.456–15.681), and 206Pb/204Pb (17.093–20.042) ratios suggest a mixture of lower crustal and supracrustal Pb sources.It is thus concluded that the ore genesis of the Zhazixi Sb–W deposit is related to the intracontinental orogeny during the early Mesozoic. Fluid mixing is considered to be the critical mechanism involved in W mineralization, whereas a fluid cooling process is responsible for Sb mineralization. Furthermore, the absence of Au is attributed to the low Σas content in Sb-mineralizing fluids. 相似文献
16.
The large (>180 Kt WO3 and at least 10–15 t Au) Vostok-2 deposit is situated in a metallogenic belt of W, Sn-W, Au, and Au-W deposits formed in late to post-collisional tectonic environment after cessation of active subduction. The deposit is related to an ilmenite-series high-K calc-alkaline plutonic suite that, by its petrologic signatures, is transitional between those at W-dominant and Au-dominant reduced intrusion-related deposits. Consistently, besides large W-Cu skarns of the reduced type, the deposit incorporates quartz stockworks with significant Au-W-Bi mineralization also formed in a reduced environment. The hydrothermal stages include prograde and retrograde, essentially pyroxene skarns, hydrosilicate (amphibole, chlorite, quartz) alteration, and phyllic (quartz, sericite, albite, apatite, and carbonate) alteration assemblages. These assemblages contain abundant scheelite associated with pyrrhotite, chalcopyrite and, at the phyllic stage, also with Bi minerals, As-Bi-Sb-Te-Pb-Zn sulfides and sulfosalts, as well as Au mineralization. The fluid evolution included hot, high-pressure (420–460 °C, 1.1–1.2 kbar), low-salinity (5.4–6.0 wt% NaCl-equiv.) aqueous fluids at the retrograde skarn stage, followed by lower temperature cyclic releases of high-carbonic, low salinity to non-carbonic moderate-salinity aqueous fluids. At the hydrosilicate stage, a high-carbonic, CH4-dominated, hot (350–380 °C) low salinity fluid was followed by cooler (300–350 °C) non-carbonic moderate-salinity (5.7–14.9 wt% NaCl-equiv.) fluid. At the phyllic stage, a high-carbonic, CO2-dominated, moderately-hot (330–355 °C, 0.9 kbar) low salinity fluid was followed by cooler (230–265 °C) non-carbonic moderate-salinity (6.6–12.0 wt% NaCl-equiv.) fluid. A homogenized magmatic source of water (δ18OH2O = +8.3 to +8.7‰), and a sedimentary source of sulfur (δ34S = −6.9 to −6.2‰) and carbon (δ13Cfluid = −20.1 to −14.9‰) at the hydrosilicate stage are suggested. A magmatic source of water (δ18O = +8.6 to +9.2‰) and a sedimentary source of sulfur (δ34S = −9.3 to −4.1‰) but a magmatic (mantle- to crustal-derived) source of carbon (δ13Cfluid = −6.9 to −5.2‰) are envisaged for fluids that formed the early mineral assemblage of the phyllic stage. Then, the role of sedimentary carbon again increased toward the intermediate (δ13Cfluid = −16.4 to −14.5‰) and late (δ13Cfluid = −16.3 to −14.7‰) phyllic mineral assemblages. The magmatic differentiation was responsible for the fluid enrichment in W, whereas Au and Bi could also have been sourced from mafic magma. The decreasing temperatures, together with elevated Ca content in non-boiling fluids, promoted scheelite deposition at the early hydrothermal stages. The most intense scheelite deposition at the phyllic stage was caused by CO2 removal due to boiling of CO2-rich fluids; further cooling of non-boiling fluids favoured joint deposition of scheelite, Bi and Au. 相似文献
17.
Porphyry systems are known to form in magmatic arc environment and commonly include porphyry Cu, epithermal Pb–Zn–Au–Ag, skarn polymetallic mineralization, etc. The systems are rarely reported in collisional zones, such as the Gangdese belt in southern Tibet where many postcollisional porphyry copper deposits occurred. In addition, other types of mineral systems are rarely present except porphyry copper mineralization in the Gangdese belt. In this study, we present Pb–Zn-bearing quartz veins at Luobuzhen in the western Gangdese belt. The Luobuzhen Pb–Zn veins cross-cut dacite of the Linzizong Group with zircon U–Pb age of 50.1 ± 0.2 Ma and monzogranite with zircon U–Pb age of 17.1 ± 0.1 Ma. Ore minerals include sphalerite, galena, chalcopyrite, and pyrite; gangue minerals are quartz with minor chlorite and sericite. Primary fluid inclusions of quartz are liquid-rich, aqueous, and two-phase inclusions. The homogenization temperatures of these primary inclusions are moderate to high (267–400 °C), and salinities range from 8.9 to 18.4 wt.% NaCl equiv. Quartz has δ18OSMOW values of 6.2–9.3‰, while sulfides have δ34SV-CDT values of −5.1‰ to 0.1‰, 206Pb/204Pb of 18.722–18.849, 207Pb/204Pb of 15.640–15.785, and 208Pb/204Pb of 39.068–39.560. These data suggest that magmatic fluids with contribution from meteoric water, magmatic sulfur, and lead derived from upper crust and metasomatized mantle by Indian continental materials would be critical for the Luobuzhen base metal mineralization.The Dongshibu area, located at ∼2 km east of the Luobuzhen, is characterized by high concentrations of Cu (up to 1450 ppm) and Mo (up to 130 ppm) of stream sediments, which is quite different from high concentrations in Pb, Zn, Ag, and Au shown in the Luobuzhen area. In addition, porphyry copper mineralization-related alteration and veins/veinlets occur in the Miocene monzogranite at Dongshibu. The monzogranite is characterized by high Sr/Y ratios, which are also shown on ore-forming intrusions in the Gangdese postcollisional porphyry copper deposits, and shows similar zircon Hf isotopes to the ore-related high Sr/Y intrusions from the Zhunuo porphyry copper deposit which is located ∼20 km northeast of the Luobuzhen-Dongshibu. A comprehensive analysis allows us to infer that the base metal veins at Luobuzhen are components of a porphyry Cu system with porphyry Cu mineralization likely present at Dongshibu and epithermal Au–Ag veins possibly occurring at Luobuzhen, which are indicative of the existence of porphyry copper systems in collisional zones. The potential porphyry Cu mineralization and epithermal Au–Ag veins should be targeted in future exploration at Luobuzhen-Dongshibu. 相似文献
18.
T. Bjerkgard H.J. Stein B. Bingen I.H.C. Henderson J.S. Sandstad A. Moniz 《Journal of African Earth Sciences》2009,53(1-2):45-58
The Niassa Gold Belt, in northernmost Mozambique, is hosted in the Txitonga Group, a Neoproterozoic rift sequence overlying Paleoproterozoic crust of the Congo–Tanzania Craton and deformed during the Pan-African Orogeny. The Txitonga Group is made up of greenschist-facies greywacke and schist and is characterized by bimodal, mainly mafic, magmatism. A zircon U–Pb age for a felsic volcanite dates deposition of the sequence at 714 ± 17 Ma. Gold is mined artisanally from alluvial deposits and primary chalcopyrite-pyrite-bearing quartz veins containing up to 19 ppm Au have been analyzed. In the Cagurué and M’Papa gold fields, dominantly N–S trending quartz veins, hosted in metagabbro and schist, are regarded as tension gashes related to regional strike-slip NE–SW-trending Pan-African shear zones. These gold deposits have been classified as mesozonal and metamorphic in origin. Re–Os isotopic data on sulfides suggest two periods of gold deposition for the Cagurué Gold Field. A coarse-crystalline pyrite–chalcopyrite assemblage yields an imprecise Pan-African age of 483 ± 72 Ma, dating deposition of the quartz veins. Remobilization of early-formed sulfides, particularly chalcopyrite, took place at 112 ± 14 Ma, during Lower Cretaceous Gondwana dispersal. The ～483 Ma assemblage yields a chondritic initial 187Os/188Os ratio of 0.123 ± 0.058. This implies a juvenile source for the ore fluids, possibly involving the hosting Neoproterozoic metagabbro. The Niassa Gold Belt is situated at the eastern end of a SW–NE trending continental-scale lineament defined by the Mwembeshi Shear Zone and the southern end of a NW–SE trending lineament defined by the Rukwa Shear Zone. We offer a review of gold deposits in Zambia and Tanzania associated with these polyphase lineaments and speculate on their interrelation. 相似文献
19.
《Journal of African Earth Sciences》2008,50(2-4):234-254
The Paleoproterozoic terranes (Birimian) of West Africa are well known to host numerous economic gold mineralizations. The Angovia gold mineralization is located in a brecciated and mylonitic zone within the Birimian greenstones. The sulfide–gold mineralization is mainly represented by gold associated with pyrite and chalcopyrite. A fluid inclusion study undertaken on mineralized quartz veins revealed the presence of aqueous-carbonic (CO2–H2O) fluids, the association of carbonic (CO2) and early aqueous fluids, followed by later aqueous (H2O-salt) and finally nitrogen-rich fluids. Entrapment of the initial homogeneous aqueous-carbonic fluids prior to fluid immiscibility depicts the evolution of the P–T conditions during the exhumation of the terranes after the peak of green-schist metamorphism. The CO2 rich-fluid occurs especially in gold-bearing quartz, and are considered as the main evidence of the ore-forming process in the gold-bearing quartz veins. It is considered as a product of immiscibility of the CO2–H2O parent. The volatile fraction of carbonic and aqueous-carbonic fluid inclusions is dominated by CO2, containing minor amounts of N2, even smaller amounts of CH4 and sporadically, H2S. The aqueous-carbonic fluids have moderate salinity (3–10 wt.% eq. NaCl). Late aqueous and N2 – (CH4–CO2) fluids are considered as later, unrelated to the main ore stage, and were trapped during the cooling of the hydrothermal system from 300 to 200 °C.The immiscibility has been favored by a strong pressure drop, the main trapping P–T conditions being 320–370 °C and 105–135 MPa. The mineralizing process is likely related to the immiscibility event, which was probably favored by the release of the fluid pressure after fracturing along the main shear zones. The ore process is likely to have occurred along the main shear zones or related secondary structures affected by cycling of the fluid pressure and quartz sealing–fracturing processes. The superimposed process can also explain the relative complexity of the quartz textures and fluid inclusion microfractures, and the rather wide range in the density of both parent fluid and CO2-dominated fluid. 相似文献
20.
Several occurrences of gold-bearing quartz veins are situated along the east–northeast-trending Barramiya–Um Salatit ophiolitic belt in the central Eastern Desert of Egypt. In the Barramiya mine, gold mineralization within carbonaceous, listvenized serpentinite and adjacent to post-tectonic granite stocks points toward a significant role of listvenitization in the ore genesis. The mineralization is related to quartz and quartz–carbonate lodes in silicified/carbonatized wallrocks. Ore minerals, disseminated in the quartz veins and adjacent wallrocks are mainly arsenopyrite, pyrite and trace amounts of chalcopyrite, sphalerite, tetrahedrite, pyrrhotite, galena, gersdorffite and gold. Partial to complete replacement of arsenopyrite by pyrite and/or marcasite is common. Other secondary phases include covellite and goethite. Native gold and gold–silver alloy occur as tiny grains along micro-fractures in the quartz veins. However, the bulk mineralization can be attributed to auriferous arsenopyrite and arsenic-bearing pyrite (with hundreds of ppms of refractory Au), as evident by electron microprobe and LA-ICP-MS analyses.The mineralized quartz veins are characterized by abundant carbonic (CO2 ± CH4 ± H2O) and aqueous-carbonic (H2O–NaCl–CO2 ± CH4) inclusions along intragranular trails, whereas aqueous inclusions (H2O–NaCl ± CO2) are common in secondary sites. Based on the fluid inclusions data combined with thermometry of the auriferous arsenopyrite, the pressure–temperature conditions of the Barramiya gold mineralization range from 1.3 to 2.4 kbar at 325–370 °C, consistent with mesothermal conditions. Based on the measured δ34S values of pyrite and arsenopyrite intimately associated with gold, the calculated δ34SΣs values suggest that circulating magmatic, dilute aqueous-carbonic fluids leached gold and isotopically light sulfur from the ophiolitic sequence. As the ore fluids infiltrated into the sheared listvenite rocks, a sharp decrease in the fluid fO2 via interaction with the carbonaceous wallrocks triggered gold deposition in structurally favorable sites. 相似文献