首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Microstructural evidence commonly is used to infer metamorphic reactions, which are used to infer pressure–temperature–time ( P–T–t ) paths. However, this approach in low- P /high- T  (LPHT) granulite facies metamorphic terranes has two main problems. (1) Microstructural evidence may be inconclusive, so that reactions cannot be inferred with confidence. In particular, relative timing of mineral growth inferred from inclusions, moulding relationships and foliation–porphyroblast relationships is commonly ambiguous or invalid. The most reliable indicators of metamorphic reactions are partial pseudomorphs and corona structures, especially if symplectic intergrowths (indicating simultaneous growth of two or more minerals) are involved. (2) Even reactions that can be inferred with confidence do not indicate unique P–T  trends, owing to P–T  slopes of reaction curves. Where successive reactions can be shown to have occurred in the same rock, a line or curve joining reaction-curve intersections gives an apparent single-event path. However, isotopic evidence is needed to prove that polymetamorphism (involving more complex paths making fortuitous intersections with the apparent single-event path) did not occur. Although these problems are well known, their importance is not always emphasized in metamorphic investigations.
The difficulties are illustrated by published work on P–T–t paths for Proterozoic LPHT granulite facies rocks of central Australia and Antarctica. Recent work in Antarctica has shown that P–T–t paths may be episodic and more complex than the simple, single-event paths commonly inferred from microstructural evidence alone.  相似文献   

2.
Ultrahigh-temperature quartz-sapphirine granulite xenoliths in the post-Karoo Lace kimberlite, South Africa, comprise mainly quartz, sapphirine, garnet and sillimanite, with rarer orthopyroxene, antiperthite, corundum and zinc-bearing spinel; constant accessories are rutile, graphite and sulphides. Comparison with assemblages in the experimentally determined FMAS and KFMASH grids indicates initial equilibration at >1040 °C and 9–11  kbar. Corona assemblages involving garnet, sillimanite and minor cordierite developed on a near-isobaric cooling P–T  path as both temperature and, to a lesser extent, pressures decreased. Garnet-orthopyroxene Fe-Mg exchange thermometers record temperatures of only 830–916 °C. These estimates do not indicate the peak metamorphic conditions but instead reflect the importance of post-peak Fe-Mg exchange during cooling. Correction of mineral Fe-Mg compositions for this exhange using a convergence approach of Fitzsimons & Harley (1994 ) leads to retrieved P–T  estimates from garnet-orthopyroxene thermobarometry ( c . 1000 °C and 10.5±0.7  kbar) that are consistent with the petrogenetic grid constraints. U-Pb dating of a single zircon grain gives an age of 2590±83  Ma, interpreted as the age of the metamorphic event. Protolith major and trace element chemistries of the xenoliths differ from sapphirine-quartzites typical of the Napier Complex (Antarctica) but are comparable to less siliceous, high Cr and Ni, sapphirine granulites reported from several ultrahigh temperature granulite terranes.  相似文献   

3.
Phase diagrams involving solid solutions are calculated by solving sets of non-linear equations. In calculating P–T  projections and compatibility diagrams, the equations used for each equilibrium are the equilibrium relationships for an independent set of reactions between the end-members of the phases in the equilibrium. Invariant points and univariant lines in P–T  projections can be calculated directly, as can coordinates in compatibility diagrams. In calculating P–T  and T–x / P–x pseudosections – diagrams drawn for particular bulk compositions – the equilibrium relationship equations are augmented by mass balance equations. Lines in pseudosections, where the mode of one phase in the lower variance equilibrium is zero, and points, where the modes of two phases are zero, can then be calculated directly. The software, THERMOCALC, allows the calculation of these and a range of other types of phase diagram. Examples of phase diagrams and phase diagram movies, with instructions for their production, along with the THERMOCALC input and output files, and the MathematicaTM functions for assembling them, are presented in this paper, partly in hard copy and partly on the JMG web sites (http://www.gly.bris.ac.uk/www/jmg/jmg.html, or equivalent Australian or USA sites).
  相似文献   

4.
The high- P , medium- T  Pouébo terrane of the Pam Peninsula, northern New Caledonia includes barroisite- and glaucophane-bearing eclogite and variably rehydrated equivalents. The metamorphic evolution of the Pouébo terrane is inferred from calculated P–T  and P–T  – X H2O pseudosections for bulk compositions appropriate to these rocks in the model system CaO–Na2O–FeO–MgO–Al2O3–SiO2–H2O. The eclogites experienced a clockwise P–T  path that reached P ≈19  kbar and T  ≈600  °C. The eclogitic mineral assemblages are preserved because reaction consequent upon decompression consumed the rocks' fluid. Extensive reaction occurred only in rocks with fluid influx during decompression of the Pouébo terrane.  相似文献   

5.
The upper pressure limit of pyrophyllite is given by the equilibria (i) pyrophyllite=diaspore+quartz and (ii) pyrophyllite=diaspore+coesite. High- P experimental investigations carried out to locate equilibrium (i) yield brackets between 497 °C/24.8  kbar and 535 °C/25.1  kbar, and between 500 °C/23  kbar and 540 °C/23  kbar. Equilibrium (ii) was bracketed at 550 °C between 26.0 and 28.3  kbar. In the experimental P–T  range, equilibria (i) and (ii) are metastable with respect to kyanite. A stable P–T  grid is calculated using thermodynamic data derived under consideration of the present experimental results. According to these data, the lower pressure limit of the assemblage diaspore+quartz according to equilibrium (i) range from about 12  kbar/300 °C to 20  kbar/430 °C (in the presence of pure water). The upper stability of diaspore+quartz is limited by the reaction diaspore+quartz=kyanite+H2O at about 450 °C (nearly independent of pressure) and, to higher pressure, by the quartz=coesite transition. Equilibrium (ii) is metastable over the whole P–T  range.
Natural occurrences600.S of the diaspore–quartz assemblage in metamorphic rocks in Sulawesi, New Caledonia, Amorgos and the Vanoise are characterized by minerals indicative of high- P such as ferro-magnesiocarpholite, glaucophane, sodic pyroxene and lawsonite. The metamorphic P–T  conditions of these rocks are estimated to be in the range 300–400 °C, >8  kbar. These data are compatible with the derived P–T  stability field of the diaspore+quartz assemblage. We conclude that, in metamorphic rocks, diaspore+quartz is, as ferrocarpholite, an indicator for unusual low- T  /very high- P settings.  相似文献   

6.
The Barro Alto complex, central Brazil, is a layered mafic–ultramafic intrusion, which was subjected to granulite facies metamorphism during the Neoproterozoic. Ultra-high-temperature conditions are recorded by parageneses that occur in some lenses of quartz-bearing rock (metagranite, metapelite and impure quartzite). The peak paragenesis consists of spinel+quartz±cordierite±leucosome (recording the former presence of melt with quartz in excess), which is replaced by either orthopyroxene+sillimanite or garnet+sillimanite. Quartz+biotite±sillimanite±garnet symplectites are ubiquitous and indicate reactions between Fe–Mg phases and melt. Late kyanite porphyroblasts have overgrown these symplectites. The direct replacement of spinel+quartz±cordierite by orthopyroxene+sillimanite or garnet+sillimanite occurred around the [Sa] invariant point, which appears only in a petrogenetic grid with inverted topology. The topology inversion occurs at conditions of high oxygen fugacity or due to the presence of ZnO-bearing spinel. Minimum peak conditions of ultra-high-temperature metamorphism were calculated as c. 980 °C and c. 7.9 kbar. The succession of observed mineral textures can be explained by a near-isobaric cooling P–T  path, with a cooling stage occurring between c. 980 and 750 °C.  相似文献   

7.
Metamorphic field gradients in the Central Alps   总被引：8，自引：0，他引：8  
Metamorphic field gradients were determined across the entire amphibolite grade Central Alps ( c . 50×100 km). P – T  were calculated from 116 samples acquired from our own field work, from samples provided to us by others, and from rocks with mineral compositions described in the literature. Only fluid-conserved equilibria were used to determine P – T  . The use of an internally consistent thermodynamic database and mineral solid solution models makes the results robust and reduces relative errors. The results are presented in contour maps. Temperature increases from 500 to 550 °C along the limit of amphibolite grade metamorphism in the north and west, to c . 675 °C toward the south at the Insubric line near the town of Bellinzona. Maximum recorded pressures of c . 7 kbar are in a central region c . 20 km north of the Insubric line, and decrease both to the north (5.5 kbar) and south (4.5 kbar). The P–T  results indicate that there is a relatively large area that reached conditions in the sillimanite stability field but developed neither sillimanite nor fibrolite; this is interpreted as a result of kinetic constraints on nucleation and growth because of the small amounts of thermal overstep (<40 °C) of the kyanite-sillimanite phase boundary. Comparison of P–T  conditions with carbonate isograds in the region indicate that fluids present during metamorphism were not dominated by a homogeneous external source. Examination of the two-dimensional distribution of pressure and temperature in the context of thermal and tectonic models indicates that two thermal pulses affected the Central Alps during the Tertiary. In the second, heat affected only the southern parts of the area and overprinted the previously established P–T  gradients.  相似文献   

8.
The Tormes Gneissic Dome (TGD, NW sector of the Iberian Massif, Spain) is a high-grade metamorphic complex affected by a major episode of extensional deformation (D2). The syn-D2 P–T  path of the Lower Unit of the TGD was deduced from the analysis of reaction textures related to superimposed fabrics developed during exhumation, analysis of mineral zoning and thermobarometric calculations. It comprises an initial phase of decompression, determined using the tweequ thermobarometric technique, from 6.4–8.1 kbar at 735–750 °C (upper structural levels) and 7.2 kbar at 770 °C (lower structural levels) to 3.3–3.9 kbar and 645–680 °C. This evolution is consistent with the observed sequence of melting reactions and the generation of garnet- and cordierite-bearing anatectic granitoids. The later part of the syn-D2 P–T  path consisted of almost isobaric cooling associated with the thermal re-equilibration of the unit in the new structural position. This segment of the P–T  path is recorded by assemblages with And +Bt+Ms and Ms+ Chl +Ab related to the later mylonitic S2 fabrics, which indicate retrogression to low-amphibolite and greenschist facies conditions.  相似文献   

9.
High-pressure metamorphic rocks exposed in the Bantimala area, c . 40  km north-east of Ujung Pandang, were formed as a Cretaceous subduction complex with fault-bounded slices of melange, chert, basalt, turbidite, shallow-marine sedimentary rocks and ultrabasic rocks. Eclogites, garnet–glaucophane rocks and schists of the Bantimala complex have estimated peak temperatures of T  =580–630 °C at 18  kbar and T  =590–640 °C at 24  kbar, using the garnet–clinopyroxene geothermometer. The garnet–omphacite–phengite equilibrium is used to estimate pressures. The distribution coefficient K D1=[( X pyr)3( X grs)6/( X di)6]/[(Al/Mg)M2,wm (Al/Si)T2,wm]3 among omphacite, garnet and phengite is a good index for metamorphic pressures. The K D1values of the Bantimala eclogites were compared with those of eclogites with reliable P–T  estimates. This comparison suggests that peak pressures of the Bantimala eclogites were P =18–24  kbar at T  =580–640 °C. These results are consistent with the P–T  range calculated using garnet–rutile–epidote–quartz and lawsonite–omphacite–glaucophane–epidote equilibria.  相似文献   

10.
Chemical disequilibrium exists between all phases of the Alpe Arami garnet-peridotite body (Ticino, Switzerland) which hampers the evaluation of P–T  conditions of origin, yet disequilibrium offers the inherent possibility to derive a P–T–t path for this mantle slice. We tried to tackle this problem by carrying out new mineral analyses and taking diffusion rates and bulk-rock compositional effects into consideration. Peak metamorphic conditions from mineral core compositions were estimated as 1120±50 °C/5±0.2 GPa. These values are significantly higher than previously published results and were determined from a combination of the O'Neill & Wood (1979) Fe/Mg garnet–olivine exchange thermometer and the Al-in-orthopyroxene barometer (Brey & Köhler, 1990), and are supported by the Ca/Cr ratios in garnet, which are in accord with these conditions. Details of the exhumation path were derived from (1) rim compositions of minerals that yield a first retrograde stage of 720±50 °C/2±0.25 GPa (2) a spinel lherzolite assemblage in narrow shear zones (tectonic phase F0', after Möckel, 1969) which documents a second retrograde stage at 500–600 °C/0.8–1.5 GPa. The Ca content in olivine (Köhler & Brey, 1989) can be used to evaluate further P–T  conditions along the retrograde path. We measured very low values (30–40  ppm Ca) in the cores of olivine and a remarkable increase towards the rim (120  ppm). The low core values may reflect an equilibrium stage during the main Alpine metamorphism. The increasing values towards the olivine rims probably represent a late-stage heating event. The initial cooling rates for the peridotite body are between 2700 and 5100 °C Ma−1, depending on which diffusion data are used.  相似文献   

11.
The Okiep Copper District, part of the 1.2–1.0 Ga high-grade terrane in western Namaqualand, is composed of a mid-Proterozoic supracrustal sequence and several pre- to post-orogenic intrusive suites affected by two high-grade events (M2a/M2b, M3) of Kibaran and one low-grade event (M4) of Pan-African age. Peak assemblages in quartz-bearing pelites are characterized either by garnet+cordierite coexisting with sillimanite/biotite, or by biotite+sillimanite±garnet; a difference controlled by bulk composition and variation in water activities (0.1–0.7) during dehydration melting. Maximum P–T conditions were reached during M2a coevally with the major deformational event (D2a) and are estimated at 750–820  °C and 5–6  kbar. A counterclockwise P–T  path is indicated by regionally occurring pseudomorphs of sillimanite after andalusite and by prograde reaction textures preserved as relics in M2a porphyroblasts. Two stages of retrograde metamorphism are distinguished: M2a garnet+cordierite-bearing assemblages were retrogressed to biotite+sillimanite+quartz (M2b) along discontinuous foliation planes and shear zones (D2b). Retrograde M3 corona assemblages formed at similar P–T  conditions (580–660  °C and 5.8±0.5  kbar) to the M2b assemblages but M3 crystallization postdates penetrative D2 deformation, intrusion of 1.06 Ga granitoids and formation of associated W–Mo deposits. It is concluded that: (a) Kibaran high-grade metamorphism in the Okiep Copper District is thermally punctuated and (b) reaction textures documenting apparent isobaric cooling of this low- P high- T  terrane must be interpreted with caution.  相似文献   

12.
Corundum+quartz-bearing assemblages occur in small lenses in granulite facies metapelites in Rayagada, north-central part of the Eastern Ghats Granulite Belt, India. Corundum porphyroblasts and quartz coexist with porphyroblastic almandine-rich garnet, hercynite spinel, ilmenite and magnetite. Corundum and quartz are separated by sillimanite or a composite corona consisting of sillimanite and garnet, whereas corundum shows sharp grain boundaries with spinel, ilmenite and magnetite. Porphyroblastic corundum contains prismatic sillimanite inclusions in which irregularly shaped quartz is enclosed. Two distinct reactions are inferred from the textural features: corundum+quartz=sillimanite and spinel+quartz=garnet+sillimanite. From the petrographical features, we infer that corundum–quartz–garnet–spinel was the peak metamorphic assemblage. Although large uncertainties exist regarding the positions of the respective reactions in P–T  space, from several published experimental results and theoretical calculations a peak metamorphic condition of 12  kbar and 1100  °C is estimated as the lower stability limit of the corundum–quartz assemblage. Decompression from the peak P–T  condition to c .  9  kbar, 950  °C is inferred.  相似文献   

13.
Ultra-high pressure eclogites and granulites both occur in the Dabie Mountains, central China. A garnet porphyroblast from felsic granulite in the Dabie Mountains has been analysed for compositional zoning by electron microprobe. Two segments of the porphyroblast have opposite compositional variations. Segment I (from centre outward 9  mm to analytical point 18) has decreasing XSps and increasing XPyr, while Segment II (from analytical point 18, 1  mm outward to the rim) has increasing XSps and XAlm and decreasing XPyr and XGrs. The compositional zoning in segment I is considered as growth zoning and that in Segment II as diffusive retrograde zoning. Garnet growth zoning records a P–T  path prior to the peak granulite metamorphism. The minimum P – T  conditions are estimated to be 1.35  GPa and 850  °C for peak metamorphism, based on the highest Mg/(Fe+Mg) composition in the garnet (analytical point 18) and matrix hypersthene, biotite and plagioclase. A symplectitic corona surrounds the porphyroblast and appears to have formed at 0.6  GPa and 700  °C. The well-preserved growth zoning in garnet suggests a short residence time for the granulite at peak metamorphism and thus rapid tectonic uplift history. The P–T  path is consistent with that of ultra-high-pressure eclogite in the area. Tectonic movements during a collisional event could have brought both the granulite and the eclogite to their present positions.  相似文献   

14.
Two high-grade gneissic complexes of the Western Sudetes, the Góry Sowie Block and the Śnieżnik area complex, contain small, predominantly felsic granulitic inliers with minor Cpx-bearing intercalations. The P–T  conditions of the granulite facies events and of the subsequent re-equilibration are estimated using the ternary feldspar thermometer and the Geo-Calc computer program (version TWQ, Jan 92).
In the Góry Sowie granulites, the peak granulitic event occurred at c . 18–20 kbar and 900 °C, and the late decompressive re-equilibration within a range of 4–10 kbar and temperatures decreasing to 600–700 °C. The latter event is thought to have coincided with the main metamorphic phase in the surrounding gneisses.
The P–T  estimates are more scattered in the Śnieżnik granulites, but the peak conditions for the granulitic event are estimated at pressure over 22 kbar (possibly around 30 kbar) and temperature exceeding 900 °C. The analysed samples from the Śnieżnik area bear no significant evidence of lower-pressure re-equilibration.
Integrating the thermobarometric data and some age constraints indicates that the Góry Sowie granulites belong to the early stage 'type I' granulites of the Variscan Belt ( c . 400 Ma old), which are interpreted as fragments of continental crustal materials subducted to mantle depths in the earliest stages of the Variscan orogeny. The Śnieżnik granulites are more problematic; they may belong to a 'younger high- P suite' ( c . 350 Ma old), widespread in the southern and eastern parts of the Bohemian Massif, and possibly related to the climax of the Variscan continent–continent collision.  相似文献   

15.
A suite of metapelitic, basic and quartzofeldspathic rocks intruded by enderbitic gneiss from the southernmost tip of the Eastern Ghats Belt, India, and metamorphosed at c. 750–800  °C, 6  kbar, were subjected to repeated ductile shear deformation, hydration, cooling and accompanying alkali metasomatism along narrow shear zones. Gedrite-bearing assemblages developed in the shear zones traversing metapelitic rocks. Interpretation of the reaction textures in an appropriate P–T  grid in the system FMASH, an isothermal–isobaric μ H2O– μ Na2O grid in the system NFMASH, and geothermobarometric data suggest a complex evolutionary history for the gedrite-bearing parageneses. Initially, gedrite-bearing assemblages were produced due to increase in μ Na2O at nearly constant but high μ H2O accompanying cooling. Gedrite was partially destabilized to orthopyroxene+albite due to progressively increasing μ Na2O. During further cooling and at increased μ H2O a second generation of gedrite appeared in the rocks.  相似文献   

16.
The Mallee Bore area in the northern Harts Range of central Australia underwent high-temperature, medium- to high-pressure granulite facies metamorphism. Individual geothermometers and geobarometers and average P–T  calculations using the program Thermocalc suggest that peak metamorphic conditions were 705–810 °C and 8–12 kbar. Partial melting of both metasedimentary and meta-igneous rocks, forming garnet-bearing restites, occurred under peak metamorphic conditions. Comparison with partial melting experiments suggests that vapour-absent melting in metabasic and metapelitic rocks with compositions close to those of rocks in the Mallee Bore area occurs at 800–875 °C and >9–10 kbar. The lower temperatures obtained from geothermometry imply that mineral compositions were reset during cooling. Following the metamorphic peak, the rocks underwent local mylonitization at 680–730 °C and 5.8–7.7 kbar. After mylonitization ceased, garnet retrogressed locally to biotite, which was probably caused by fluids exsolving from crystallizing melts. These three events are interpreted as different stages of a single, continuous, clockwise P–T  path. The metamorphism at Mallee Bore probably occurred during the 1745–1730 Ma Late Strangways Orogeny, and the area escaped significant crustal reworking during the Anmatjira and Alice Springs events that locally reached amphibolite facies conditions elsewhere in the Harts Ranges.  相似文献   

17.
The Cretaceous Abukuma metamorphic terrane consists of the oceanic Gosaisyo Series overthrust onto the terrigenous Takanuki Series. Although the dominant mineralogy defines one of the classic areas of andalusite–sillimanite type progressive metamorphism, there are several lines of evidence suggesting an earlier higher-pressure (up to c . 12  kbar) history of the Takanuki Series and the nearby Gosaisyo Series. These are: (1) the occurrence of rare although widespread relic kyanite in sillimanite+K-feldspar zone-grade pelitic rocks; (2) the high grossular content of garnet interiors (up to c . 30  mol %) overgrown by Ca-poor rims ( c . 2  mol % grossular) in pelitic rocks containing Al2SiO5 minerals (sillimanite±relic kyanite±retrograde andalusite), plagioclase and quartz; (3) the occurrence of rutile as inclusions in garnet in pelitic rocks; and (4) the occurrence of relic corundum+almandine association in silica-poor and Al–Fe-rich rocks. Garnet in the Takanuki Series pelitic rocks commonly shows textural sector zoning and preserves growth zoning despite the high metamorphic grade, suggesting rapid changes in P–T  conditions and a relatively short duration of high-temperature conditions. Combined with radiometric dating, these observations suggest that the Abukuma sillimanite+K-feldspar zone-grade rocks underwent a clockwise P–T  path with very fast (>4  mm  y−1) average burial and exhumation rates.  相似文献   

18.
Hydration of eclogite, Pam Peninsula, New Caledonia   总被引：2，自引：0，他引：2  
Garnet glaucophanite and greenschist facies assemblages were formed by the recrystallization of barroisite-bearing eclogite facies metabasites in northern New Caledonia. The mineralogical evolution can be modelled by calculated P–T and P–X H2O diagrams for appropriate bulk rock compositions in the model system CaO–Na2O–FeO–MgO–Al2O3–SiO2–H2O. The eclogites, having developed in a clockwise P–T path that reached P ≈19 kbar and T  ≈590 °C, underwent decompression with the consumption of free H2O as the volume of hydrous minerals increased. Eclogite is preserved in domains that experienced no fluid influx following the loss of this fluid. Garnet glaucophanite formed at P ≈16 kbar during semi-pervasive fluid influx. Fluid influx, after further isothermal decompression, was focused in shear zones, and resulted in chlorite–albite-bearing greenschist facies mineral assemblages that reflect P ≈9 kbar.  相似文献   

19.
A study of the metamorphic and tectonic evolution of the Bündnerschiefer of the Engadine window shows that the individual nappes have been thinned by a large amount and that extension was active during and soon after nappe stacking.
Based on contrasting P–T  histories the Penninic Bündnerschiefer can be divided in two major units bounded by a horizontal contact. The lower (Mundin) unit shows typical high- P /low- T  parageneses in metapelites (Mg-carpholite) and in metabasites (glaucophane); metamorphic conditions are estimated around 12  kbar, 375  °C. The upper (Arina) unit contains no specific high- P minerals; metamorphic conditions are estimated around 7  kbar, 325  °C. A minimum pressure gap of 5  kbar is thus observed. The contact between the two units is marked by a mappable normal shear zone with top-to-the-north-west sense of shear. Near the shear zone, fresh carpholite fibres trend parallel to the regional stretching lineation, implying that the detachment is an early structure active from the depth of stability of the carpholite and persisting during subsequent exhumation. The good preservation of carpholite and the absence of retrograde chloritoid below the shear zone show that exhumation occurred along a cooling path, whereas the deeper units are exhumed along an isothermal path. Exhumation probably occurred during convergence and further nappe stacking during the earlier Eocene. These results suggest that pre-collisional tectonic thinning of the Penninic oceanic units may be more widespread and significant than generally recognized.
  相似文献   

20.
The Lewisian of Tiree, north-west Scotland, underwent granulite facies metamorphism prior to 2.4 Ga. The temperatures and pressures estimated from garnet–clinopyroxene, garnet–orthopyroxene, hornblende–plagioclase and garnet–biotite geothermometers and clinopyroxene–plagioclase–garnet–quartz and orthopyroxene–plagioclase–garnet–quartz geobarometers are 810 ± 50° C and 10.5 ± 1.5 kbar. The imprecision of pressure estimates stems largely from uncertainties in garnet activity models. Calculations of blocking temperatures for Fe–Mg interdiffusion in clinopyroxene and garnet suggest that these temperatures and pressures represent only slightly reset peak-metamorphic conditions.
Down-temperature re-equilibration resulted in chemical zoning over the outer 50–100 μm of the mafic minerals. P–T paths calculated from this mineralogical zoning suggest nearly isobaric cooling. However, the growth of late sillimanite in metapelites requires that the retrograde P–T path had a significant decompression component, suggesting that the mineralogical zonation does not define the retrograde P–T path. The discrepancy between the P–T path calculated from mineralogical zonation and that implied by mineral reactions probably results from the net-transfer geobarometry reactions closing at higher temperatures than the exchange geothermometers.
The Tiree rocks have a similar history to the mainland Scourian complex. Granulite facies metamorphism accompanied by partial melting occurred prior to the intrusion of the Scourie dykes at c. 2.4 Ga, and the rocks underwent retrogression both prior to and after dyke emplacement. However, peak metamorphic temperatures and pressures on Tiree were lower than those recorded in the Scourian complex, and the Tiree rocks may have been at a different crustal level at that time.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号