首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献，搜索用时 124 毫秒
1.
Present-day stress orientations in the Northern Perth Basin have been inferred from borehole breakouts and drilling-induced tensile fractures observed on image logs from eight wells. Stress indicators from these wells give an east – west maximum horizontal stress orientation, consistent with stress-field modelling of the Indo-Australian Plate. Previous interpretations using dipmeter logs indicated anomalous north-directed maximum horizontal stress orientations. However, higher-quality image logs indicate a consistent maximum horizontal stress orientation, perpendicular to dominant north – south and northwest – southeast fault trends in the basin. Vertical stress was calculated from density logs at 21.5 MPa at 1 km depth. Minimum horizontal stress values, estimated from leak-off tests, range from 7.4 MPa at 0.4 km to 21.0 MPa at 0.8 km depth: the greatest values are in excess of the vertical stress. The maximum horizontal stress magnitude was constrained using the relationship between the minimum and maximum horizontal stresses; it ranges from 8.7 MPa at 0.4 km to 21.3 MPa at 1 km depth. These stress magnitudes and evidence of neotectonic reverse faulting indicate a transitional reverse fault to strike-slip fault-stress regime. Two natural fracture sets were interpreted from image logs: (i) a north- to northwest-striking set; and (ii) an east-striking set. The first set is parallel to adjacent north- to northwest-striking faults in the Northern Perth Basin. Several east-striking faults are evident in seismic data, and wells adjacent to east-striking faults exhibit the second east-striking set. Hence, natural fractures are subparallel to seismically resolved faults. Fractures optimally oriented to be critically stressed in the present-day stress regime were probably the cause of fluid losses during drilling. Pre-existing north- to northwest -striking faults that dip moderately have potential for reactivation within the present-day stress regime. Faults that strike north to northwest and have subvertical dips will not reactivate. The east-striking faults and fractures are not critically stressed for reactivation in the Northern Perth Basin.  相似文献   

2.
The Australian continent displays the most complex pattern of present-day tectonic stress observed in any major continental area. Although plate boundary forces provide a well-established control on the large-scale (>500 km) orientation of maximum horizontal stress (SHmax), smaller-scale variations, caused by local forces, are poorly understood in Australia. Prior to this study, the World Stress Map database contained 101 SHmax orientation measurements for New South Wales (NSW), Australia, with the bulk of the data coming from shallow engineering tests in the Sydney Basin. In this study we interpret present-day stress indicators analysed from 58.6 km of borehole image logs in 135 coal-seam gas and petroleum wells in different sedimentary basins of NSW, including the Gunnedah, Clarence-Moreton, Sydney, Gloucester, Darling and Bowen–Surat basins. This study provides a refined stress map of NSW, with a total of 340 (A–E quality) SHmax orientations consisting of 186 stress indicators from borehole breakouts, 69 stress measurements from shallow engineering methods, 48 stress indicators from drilling-induced fractures, and 37 stress indicators from earthquake focal mechanism solutions. We define seven stress provinces throughout NSW and determine the mean orientation of the SHmax for each stress province. The results show that the SHmax is variable across the state, but broadly ranges from NE–SW to ESE–WNW. The SHmax is approximately E–W to ESE–WNW in the Darling Basin and Southeastern Seismogenic Zone that covers the west and south of NSW, respectively. However, the present-day SHmax rotates across the northeastern part of NSW, from approximately NE–SW in the South Sydney and Gloucester basins to ENE–WSW in the North Sydney, Clarence-Moreton and Gunnedah basins. Comparisons between the observed SHmax orientations and Australian stress models in the available literature reveal that previous numerical models were unable to satisfactorily predict the state of stress in NSW. Although clear regional present-day stress trends exist in NSW, there are also large perturbations observed locally within most stress provinces that demonstrate the significant control on local intraplate sources of stress. Local SHmax perturbations are interpreted to be due to basement topography, basin geometry, lithological contrasts, igneous intrusions, faults and fractures. Understanding and predicting local stress perturbations has major implications for determining the most productive fractures in petroleum systems, and for modelling the propagation direction and vertical height growth of induced hydraulic fractures in simulation of unconventional reservoirs.  相似文献   

3.
The Georgina Basin is a Neoproterozoic–Paleozoic basin that spans parts of the Northern Territory and Queensland in northern Australia. The basin is prospective for petroleum, phosphate and base metals (copper, lead and zinc). The Dulcie and Toko synclines in the southern part of the basin are prospective for petroleum, where a thick Cambro-Ordovician succession of marine carbonates hosts several source rocks and associated oil and gas shows. The key source rock units occur within the middle Cambrian Narpa Group, including both the Thorntonia Limestone (Series 2 and 3) and the Arthur Creek Formation (Series 3). The base of the Arthur Creek Formation is characterised by organic-rich ‘hot’ shales (associated with a prominent gamma spike in well logs) that have been targeted by petroleum explorers for both conventional and unconventional oil and gas. For this study, hyperspectral logging data collected by HyLogger? instruments were evaluated from 13 wells in the southern Georgina Basin, including petroleum, mineral and stratigraphic wells. Formation boundaries are commonly (but not always) characterised by distinctive changes in mineralogy, as determined by spectral and X-ray diffraction data. Key source rock units in the southern Georgina Basin were characterised and mapped in terms of their mineralogy, and other spectral properties (e.g. Short-Wave Infrared (SWIR) reflectance and spectral contrast). Interpretation of the hyperspectral data alongside wireline log data supports the differentiation of two successions within the Arthur Creek Formation that are each characterised by basal organic-rich shales, previously distinguished on the basis of biostratigraphic and well-log data. The older succession in the Dulcie Syncline is spectrally characterised as being quartz and carbonate dominated. The younger succession, distributed across the eastern part of the Dulcie Syncline and fully across the Toko Syncline, is spectrally characterised as quartz and carbonate dominated, with variable white-mica contributions. Key associations are observed between the HyLogger mineralogy and geophysical-log data. Peaks in the gamma log intensity in the middle Cambrian sediments commonly correspond to elevated measured total organic carbon contents, decreased carbonate contribution, SWIR reflectance and spectral contrast, and relatively increased proportions of white micas and quartz. This study demonstrates that HyLogging data can provide an improved understanding of the sedimentological, mineralogical and diagenetic characteristics, as well as associated spatial heterogeneity, of prospective hydrocarbon formations in sedimentary basins.  相似文献   

4.
Exploration of Perth's geothermal potential has been performed by the Western Australian Geothermal Centre of Excellence (WAGCoE). Detailed vertical temperature and gamma ray logging of 17 Western Australia Department of Water's (DoW) Artesian Monitoring (AM) wells was completed throughout the Perth Metropolitan Area (PMA). In addition, temperature logs from 53 DoW AM wells measured in the 1980s were digitised into LAS format. The logged data are available in the WAGCoE Data Catalogue.

Analysis of the gamma ray logs yielded the first estimates of radiogenic heat production in Perth Basin formations. Values by formation ranged between 0.24 and 1.065 μW m?3. The temperature logs provide a picture of true formation temperatures within shallow sediments in the Perth Basin. A three-dimensional model of the temperature distribution was used to produce maps of temperature at depth and on the top of the Yarragadee aquifer.

The temperature data were interpreted with a one-dimensional conductive heat model. Significant differences between the model and the observations was indicative of heat moving via non-conductive mechanisms, such as advection or convection. Evidence of non-conductive or advective heat flow is demonstrated in most formations in the region, with significant effects in the aquifers. Average conductive geothermal gradients range from 13°C km?1 to 39°C km?1, with sandstone formations exhibiting average gradients of approximately 25°C km?1, while insulating silt/shale formations show higher average gradients of over 30°C km?1.

To produce preliminary heat flow estimates, temperature gradients were combined with thermal conductivities measured elsewhere. The geometric mean heat flow estimates range between 64 mW m?2 to 91 mW m?2, with the standard deviation of the arithmetic mean heat flow ranging between 15 and 23 mW m?2.

The study characterises the shallow temperature regime in the Perth Metropolitan Area, which is of direct relevance towards developing commercial geothermal projects.  相似文献   

5.
The northwestern Junggar Basin in the southwestern Central Asian Orogenic Belt is a typical petroliferous basin. The widely distributed reservoirs in Jurassic–Cretaceous strata indicate that the region records Yanshanian–Himalayan tectonic activity, which affected the accumulation and distribution of petroleum. The mechanism of this effect, however, has not been fully explored. To fill the knowledge gap, we studied the structural geology and geochemistry of the well-exposed Wuerhe bitumen deposit. Our results indicate that deformation and hydrocarbon accumulation in the northwestern Junggar Basin during the Yanshanian–Himalayan geodynamic transformation involved two main stages. During the Yanshanian orogeny, a high-angle extensional fault system formed in Jurassic–Cretaceous strata at intermediate to shallow depths owing to dextral shear deformation in the orogenic belt. This fault system connected at depth with the Permian–Triassic oil–gas system, resulting in oil ascending to form fault-controlled reservoirs (e.g., a veined bitumen deposit). During the Himalayan orogeny, this fault system was deactivated owing to sinistral shear caused by far-field stress related to uplift of the Tibetan Plateau. This and the reservoir densification caused by cementation formed favorable hydrocarbon preservation and accumulation conditions. Therefore, the secondary oil reservoirs that formed during the Yanshanian–Himalayan tectonic transformation and the primary oil reservoirs that formed during Hercynian–Indosinian orogenies form a total and complex petroleum system comprising conventional and unconventional petroleum reservoirs. This might be a common feature of oil–gas accumulation in the Central Asian Orogenic Belt and highlights the potential for petroleum exploration at intermediate–shallow depths.  相似文献   

6.
Gas shales are one type of unconventional reservoirs which have attracted significant attention for gas production in recent years. Gas production from very tight shales requires employment of hydraulic fracturing as a stimulation technique. To design hydraulic fracture operation the mechanical properties of the targeted and surrounding formations should be estimated. Also, the magnitude and orientation of in situ stresses in the field need to be known to estimate the fracture initiation and propagation pressures. This study focuses on gas shale characteristics in the North Perth Basin and uses data corresponding to well Arrowsmith-2 (AS-2) which is the first dedicated shale gas well drilled in Western Australia. A log-based analysis was used to build the rock mechanical model (RMM). The RMM results were used to set up a hydraulic fracturing laboratory experiment. The test was done in the presence of three principal stresses to mimic the real field stress conditions. The test results include the pressure–time curve which was used to estimate the initiation and propagation pressure at that depth. The results were used to draw some practical conclusions related to hydraulic fracturing operation in the field.  相似文献   

7.
The Australian Cooper Basin is a structurally complex intra-cratonic basin with large unconventional hydrocarbon potential. Fracture stimulation treatments are used extensively in this basin to improve the economic feasibility; however, such treatments may induce fault activity and risk the integrity of hydrocarbon accumulations. Fault reactivation may not only encourage tertiary fluid migration but also decrease porosity through cataclasis and potentially compartmentalise the reservoir. Relatively new depth-converted three-dimensional seismic surveys covering the Dullingari and Swan Lake 3D seismic surveys were structurally interpreted and geomechanically modelled to constrain the slip tendency, dilation tendency and fracture stability of faults under the present-day stress. A field-scale pore pressure study found a maximum pressure gradient of 11.31 kPa/m within the Dullingari 3D seismic survey, and 11.14 kPa/m within the Swan Lake 3D seismic survey. The present-day stress tensor was taken from previously published work, and combined with local pore pressure gradients and depth-converted field-scale fault geometries, to conclude that SE–NW-striking strike-slip faults are optimally oriented to reactivate and dilate. High-angle faults striking approximately E–W appear most likely to dilate, and act as fluid conduits irrespective of being modelled under a strike-slip or compressional stress regime. Near-vertical SE–NW and NE–SW-striking faults were modelled to be preferentially oriented to slip and reactivate under a strike-slip stress regime. Considering that SE–NW-striking strike-slip faults have only recently been interpreted in the literature, it is possible that many reservoir simulations and development plans have overlooked or underestimated the effect that fault reactivation may have on reservoir properties. Future work investigating the likelihood that fracture stimulation treatments may be interacting, and reactivating, pre-existing faults and fractures would benefit field development programs utilising high-pressure hydraulic fracture stimulation treatments.  相似文献   

8.
The Campo de Dal??as, located between the central and eastern Betic Cordilleras, shows an evolution determined by the overprinting of two main stress fields since Pliocene times. The first of these develops hybrid and tensional joint sets up to Pleistocene (100 000 yr) and is characterized by NNW–SSE horizontal trend of compression and an ENE–WSW horizontal extension. The second stress field has prolate to triaxial extensional ellipsoids, also with ENE–WSW horizontal extension, and continues to be active today. The most recent stresses produce the reactivation of previous joints as faults whose trends are comprised mainly from N120°E to N170°E and have a normal and transtensional regime, with dextral or sinistral components. The palaeostress evolution of this region is similar to that undergone by other basins of the Eastern Betic Cordilleras, although the Pliocene–Pleistocene transcurrent deformations in the Campo de Dal??as only develop joints and not strike-slip faults.  相似文献   

9.
《China Geology》2020,3(4):591-601
The Sichuan Basin is one of the vital basins in China, boasting abundant hydrocarbon reservoirs. To clarify the intensity of the tectonic stress field of different tectonic episodes since the Mesozoic and to identify the regional dynamic background of different tectonic movements in the Sichuan Basin and its adjacent areas, the characteristics of the acoustic emission in rocks in different strata of these areas were researched in this paper. Meanwhile, the tectonic stress magnitude in these areas since the Mesozoic was restored. The laws state that the tectonic stress varied with depth was revealed, followed by the discussion of the influence of structural stress intensity on structural patterns in different tectonic episodes. These were conducted based on the paleostress measurement by acoustic emission method and the inversion principle of the stress fields in ancient periods and the present, as well as previous research achievements. The results of this paper demonstrate that the third episode of Yanshanian Movement (Yanshanian III) had the maximum activity intensity and tremendously influenced the structural pattern in the study area. The maximum horizontal principal stress of Yanshanian III varied with depth as follows: 0.0168 x + 37.001 (MPa), R2 = 0.8891. The regional structural fractures were mainly formed in Yanshanian III in Xujiahe Formation, west Sichuan Basin, of which the maximum paleoprincipal stress ranging from 85.1 MPa to 120.1 MPa. In addition, the law stating the present maximum horizontal principal stress varies with depth was determined to be 0.0159 x+10.221 (MPa), R2=0.7868 in Wuling Mountain area. Meanwhile, it was determined to be 0.0221 x+9.4733 (MPa), R2=0.9121 in the western part of Xuefeng Mountain area and 0.0174 x+10.247 (MPa), R2=0.8064 in the whole study area. These research results will not only provide data for the simulation of stress field, the evaluation of deformation degree, and the prediction of structural fractures, but also offer absolute geological scientific bases for the elevation of favorable shale gas preservation.  相似文献   

10.
深部泥页岩储层地应力状态的准确确定是页岩气等非常规能源高效开发的关键。综合基于原位地应力测试获得水平最小主应力,建立基于流变模型的地应力剖面,应用成像测井技术确定水平最大主应力方向等,是准确确定泥页岩储层地应力的有效方法。将该研究思路应用于陕西汉中SZ1井,利用水压致裂原地应力测试方法获得储层水平最小主应力值范围为32~41 MPa;利用偶极声波测井数据获得岩石力学参数,结合地壳应变率和储层埋藏史,建立了SZ1井地应力剖面,结果表明牛蹄塘组1950~2025 m深度范围内水平主应力差介于10~15 MPa,水平最小主应力值范围为28~41 MPa,水平最大主应力值范围为47~49 MPa,预测得到的水平最小主应力值与实测结果具有较好的一致性。原地应力实测及流变模型预测结果揭示SZ1井地应力为正断型(Sv＞SH＞Sh)或正断型与走滑型相结合的应力状态(Sv≈SH＞Sh)。水平主应力差随伽玛值的升高而变小,表明地应力剖面与地层岩性具有较好的对应关系。基于成像测井揭示的钻孔诱导张裂隙分布特征,SZ1井水平最大主应力方向约为N74°W,与区域构造应力场方向基本一致。相关结论为准确认识SZ1井目标层地应力状态,以及后期水平井布设及压裂控制等提供了重要依据。   相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号