共查询到20条相似文献，搜索用时 46 毫秒
1.
Changho Lee Tae Sup Yun Jong-Sub Lee Jang Jun Bahk J. Carlos Santamarina 《Engineering Geology》2011,117(1-2):151-158
The geotechnical characteristics of Ulleung Basin sediments are explored using depressurized samples obtained at 2100 m water depth and 110 m below the sea floor. Geotechnical index tests, X-ray diffraction, and SEM images were obtained to identify the governing sediment parameters, chemical composition and mineralogy. We use an instrumented multi-sensor oedometer cell to determine the small-strain stiffness, zero-lateral strain compressibility and electromagnetic properties, and a triaxial device to measure shear strength. SEM images show a sediment structure dominated by microfossils, with some clay minerals that include kaolinite, illite, and chlorite. The preponderant presence of microfossils determines the high porosity of these sediments, defines their microstructure, and governs all macroscale properties. The shear wave velocity increases as the vertical effective stress increases; on the other hand, porosity, permittivity, electrical conductivity, and hydraulic conductivity decrease with increasing confinement. All these parameters exhibit a bi-linear response with effective vertical stress due to the crushable nature of microfossils. Well-established empirical correlations used to evaluate engineering parameters do not apply for these diatomaceous sediments which exhibit higher compressibility than anticipated based on correlations with index properties. Settlements will be particularly important if gas production is attempted using depressurization because this approach will cause both hydrate dissociation and increase in effective stress. 相似文献
2.
Shear wave velocity is a fundamental property of a granular assembly. It is a measure of the true elastic stiffness of a bulk specimen of discrete grains. Shear wave velocity is typically measured in the laboratory (e.g., using bender elements) or in-situ (e.g., using a seismic cone penetrometer, sCPT). In the current work, shear wave propagation is modeled numerically using the discrete element method (DEM). First, an appropriate method for measuring wave velocity is identified. Then the effects of particle size and elastic properties are investigated. Specimen fabric is then quantified before and after wave excitation and the elasticity of the response at the scale of the particle contacts is investigated. The results show that shear wave velocity may be robustly measured for discrete numerical specimens. The ability to measure shear wave velocity using DEM simulations may provide another tool for researchers seeking to link results from physical and numerical experiments. 相似文献
3.
Stress-induced evolution of anisotropic thermal conductivity of dry granular materials 总被引：1，自引：1，他引：0
Jinhyun Choo Young Jin Kim Jung Hwoon Lee Tae Sup Yun Jangguen Lee Young Seok Kim 《Acta Geotechnica》2013,8(1):91-106
Various factors, such as the volumetric fraction of constituents, mineralogy, and pore fluids, affect heat flow in granular materials. Although the stress applied on granular materials controls the formation of major pathways for heat flow, few studies have focused on a detailed investigation of its significance with regard to the thermal conductivity and anisotropy of the materials. This paper presents a numerical investigation of the stress-induced evolution of anisotropic thermal conductivity of dry granular materials with supplementary experimental results. Granular materials under a variety of stress conditions in element testing are analyzed by the three-dimensional discrete element method, and quantitative variations in their anisotropic effective thermal conductivity are calculated via the network model and conductivity tensor measurements. Results show that the directional development of contact area and fabric under anisotropic stress conditions leads to the evolution of anisotropy in thermal conductivity. The anisotropy induced in thermal conductivity by shear stress is higher than that induced by compressive stress because shear stress causes more significant changes in microstructural configurations and boundary conditions. The shear-stress-induced evolution of anisotropy between principal thermal conductivities depends on dilatancy as well as shearing mode, and the shear-driven discontinuity localizes the conductivity. Factors involved in the stress-induced evolution and their implications on the thermal conductivity characterization are discussed. 相似文献
4.
月壤的物理和机械性质 总被引：46，自引：0，他引：46
月壤是在O2、水、风和生命活动都不存在的情况下，由陨石和微陨石撞击、宇宙射线和太阳风轰击、月表温差导致岩石热胀冷缩破碎等因素的共同作用下形成的。月壤独特的形成过程，加上独特的月表环境，使月壤在粒度分布、颗粒形态、颗粒比重、孔隙比和孔隙率、电性和电磁性质、压缩性、抗剪性、承载力等方面均与地球土壤存在较大差异，这些参数的平均值和最佳估计值，可以作为月表机械设计和操作、宇航员装备设计、月球着陆场选址的主要依据，对月球资源开发和利用以及月球基地建设具有极其重要的意义。 相似文献
5.
颗粒形状是影响粗粒土密实度、力学与渗流等特性的主要因素之一。为了分析颗粒形状对粗粒土剪切特性的影响,采用离散元法生成4种不同形状的颗粒组,进行粗粒土直剪试验模拟与剪切宏细观响应研究,得出了颗粒形状对剪应力-剪位移、体应变-剪位移的影响,分析了粗粒土剪切应力、应变特性与剪胀特性。通过分析剪切带厚度、颗粒旋转量值、平均接触数、孔隙率及接触力系等宏细观参量的演化规律,研究颗粒形状在宏细观尺度上对粗粒土的影响。研究表明:异形颗粒间的咬合自锁作用大于纯圆颗粒,试样的抗剪强度有随形状系数的减小而增大的趋势。试样颗粒在外荷载作用下发生运动,应变主要表现在颗粒运动剧烈、剪胀幅度较大的剪切带内。颗粒形状系数F减小,试样的初始平均接触数增加,内摩擦角φ增大,剪切带内孔隙率增量越大,剪胀幅度越大。剪切过程中强力链聚集于剪切带内并起骨架作用,随着形状系数的减小,力链长度在0～5所占百分比呈增大趋势;剪切带内强力链的数目随着形状系数的减小而增加,峰值含量在30%～35%之间。 相似文献
6.
针对取自我国南部某海域的钙质砂样本,做了以下两方面工作：一是通过电子显微镜获取了钙质砂颗粒的几何投影图像,利用图像处理技术对图形进行黑白二值化处理,获取单元颗粒形状轮廓边界,使用圆度和粗糙度2个参数对钙质砂的颗粒形状进行定义和量化。二是通过不同围压下的三轴固结排水剪切试验及试验前后的颗分测量对比,研究了颗粒破碎对钙质砂的变形、强度、能量耗散等特性的影响。研究表明,大粒径钙质砂（粒径大于2.0 mm）和小粒径钙质砂（粒径小于0.5 mm）形态比较接近圆形、颗粒表面相对光滑;相比而言,中间粒径（粒径介于0.5～2.0 mm之间）钙质砂形状较不规则,表面棱角较多。钙质砂在三轴排水剪切过程中发生颗粒破碎,试样向着级配均匀的方向发展。随着初始围压的增大,颗粒破碎程度加大,土样整体剪胀趋势减小,而破碎引起的能量耗散增加。而在高围压（初始围压为600 kPa）剪切过程中,仅考虑摩擦耗散,以及同时考虑摩擦、体积耗散两种情况下,计算得到的最大颗粒破碎耗散分别可达土样总输入塑性功的25%和18%。 相似文献
7.
The macroscopic mechanical behavior of granular materials inherently depends on the properties of particles that compose them. Using the discrete element method, the effect of particle contact friction and polydispersity on the macroscopic stress response of 3D sphere packings is studied. The analytical expressions for the pressure, coordination number and fraction of rattlers proposed for isotropically deformed frictionless systems also hold when the interparticle coefficient of friction is finite; however, the numerical values of the parameters such as the jamming volume fraction change with varying microscopic contact and particle properties. The macroscopic response under deviatoric loading is studied with triaxial test simulations. Concerning the shear strength, our results agree with previous studies showing that the deviatoric stress ratio increases with particle coefficient of friction μ starting from a nonzero value for μ = 0 and saturating for large μ. On the other hand, the volumetric strain does not have a monotonic dependence on the particle contact friction. Most notably, maximum compaction is reached at an intermediate value of the coefficient of friction μ ≈ 0.3. The effect of polydispersity on the macroscopic stress–strain relationship cannot be studied independent of initial packing conditions. The shear strength increases with polydispersity when the initial volume fraction is fixed, but the effect of polydispersity is much less pronounced when the initial pressure of the packings is fixed. Finally, a simple hypoplastic constitutive model is calibrated with numerical test results following an established procedure to ascertain the relation between particle properties and material coefficients of the macroscopic model. The calibrated model is in good qualitative agreement with simulation results. 相似文献
8.
This paper describes a three-dimensional random network model to evaluate the thermal conductivity of particulate materials. The model is applied to numerical assemblies of poly-dispersed spheres generated using the discrete element method (DEM). The grain size distribution of Ottawa 20–30 sand is modeled using a logistic function in the DEM assemblies to closely reproduce the gradation of physical specimens. The packing density and inter-particle contact areas controlled by confining stress are explored as variables to underscore the effects of micro- and macro-scales on the effective thermal conductivity in particulate materials. It is assumed that skeletal structure of 3D granular system consists of the web of particle bodies interconnected by thermal resistor at contacts. The inter-particle contact condition (e.g., the degree of particle separation or overlap) and the particle radii determine the thermal conductance between adjacent particles. The Gauss–Seidel method allows evaluation of the evolution of temperature variation in the linear system. Laboratory measurements of thermal conductivity of Ottawa 20–30 sand corroborate the calculated results using the proposed network model. The model is extended to explore the evolution of thermal conduction depending on the nucleation habits of secondary solid phase as an anomalous material in the pore space. The proposed network model highlights that the coordination number, packing density and the inter-particle contact condition are integrated together to dominate the heat transfer characteristics in particulate materials, and allows fundamental understanding of particle-scale mechanism in macro-scale manifestation. 相似文献
9.
基于Leclaire对饱和双相孔隙弹性介质Biot模型的扩展,研究含有两种不同固相组分的三相多孔弹性介质中体波的传播特性。以饱和冻土为例,分析了各相体积分数、颗粒形状,接触参数等因素对波动方程中惯性参数、黏性参数、刚度参数的影响;对该三相介质模型进行了退化,分析了孔隙中只含液态水或固态冰时体波的特性;以饱和冻土为例,通过数值计算,探讨了饱和冻土中体波的相速度和衰减系数与胶结参数、接触参数、频率、饱和度、孔隙率等参数的关系。结果表明：与一般的饱和土不同,饱和冻土中存在5种体波,即3种纵波和2种横波;5种体波均具有弥散性和衰减性,且P1波、S1波弥散性和衰减性远小于P2、P3、S2波;胶结参数、饱和度、孔隙率对5种体波的传播特性影响显著,接触参数对传播特性影响较小。 相似文献
10.
为探究注采参数对松辽盆地干热岩物理力学及波动特征的影响，对不同注采参数下高温遇水冷却后花岗岩进行纵、横波波速测试试验和抗压强度试验。分别考虑注采参数（岩样温度、水温、高温遇水循环次数） 与岩样物理力学特征（外观形态、峰值强度、弹性模量、泊松比）、波动特征（纵、横波波速） 的关联性，建立不同注采参数下力学特征与波动特征拟合曲线，并研究搁置过程中不同岩样温度、不同水温条件下岩体物理力学及波动特征变化规律。研究发现：（1） 搁置初期，岩样温度越高，质量、纵、横波波速、弹性模量降幅越大；水温升高，质量、纵、横波波速、弹性模量降幅先增大后减小。（2） 对采热过程中岩体物理力学及波动特征影响由大到小的注采参数依次为靶区温度、注水循环次数、注水温度。提升岩样温度、增加注水循环次数，岩样力学与波动特征均逐渐下降，提高注水温度变化规律与其相反；经历600℃高温，岩样纵波波速、横波波速、峰值强度、弹性模量降幅分别达到53.44%、58.02%、66.56%、79.84%，高温遇水循环5 次
后降幅依次达到33.61%、33.63%、34.22%、56%。（3） 影响岩样力学与波动特征关联性的注采参数由大到小依次为岩样温度、高温遇水循环次数、水温。此研究能够为松辽盆地热采注采参数的选取提供一定参考。 相似文献
11.
砂土颗粒形状量化及其对力学指标的影响分析 总被引：2，自引：0，他引：2
砂作为一种特殊的散体材料,其宏观物理力学性质,如密实度、剪切特性（临界状态角,剪胀角）、压缩性及颗粒破碎特征等均受到颗粒形状的影响,目前为止,对于砂粒土颗粒形状的量化工作,未到达成熟阶段。试验采用普通光学显微镜获取3种不同砂颗粒及一种相似材料（玻璃球）数字图像,利用ImageJ图形软件对其进行黑白二值化处理,获取颗粒形状轮廓边界;从3个层次定义颗粒形状参数,并利用java语言编制形状量化插件程序,计算砂粒各形状参数值,最后通过相对密度试验、直剪试验测试不同砂样的极限孔隙比、剪切强度指标。试验结果表明：整体轮廓系数、球形度、棱角度3项形状参数可作为不同砂粒形状鉴别和量化的关键参数,且与剪胀角、临界状态摩擦角均具有良好的相关性,试验提供了一种量化砂颗粒形状的有效方法,并可将得到的关键量化参数应用到宏观力学性质分析与数值模拟工作中 相似文献
12.
软土预压工程中,初始和诱发各向异性对软土力学性质的影响十分显著,而现有研究缺乏对初始和诱发各向异性的统一研究方法。采用离散单元法,以颗粒长宽比作为定量评价指标,构建真实形态的颗粒模型,生成5组不同沉积角的初始各向异性试样,并进行竖直和水平两方向加载的双轴模拟实验,研究了初始各向异性和诱发各向异性对软土力学特性影响;在细观层面,以颗粒为对象研究了颗粒接触形式和转动角度的变化规律,以接触为对象研究了配位数和接触法向各向异性的发展趋势,在此基础上探究抗剪强度指标与各向异性关系。结果表明:初始和诱发各向异性共同影响试样力学性质,当加载方向和软土沉积方向垂直时,土体有最大的峰值强度。颗粒接触形式中面面接触的比例随加载的进行逐渐增大,并影响着试样初始模量和抗剪强度,配位数和接触法向各向异性受颗粒接触形式的影响有不同的演化规律,并在加载后期趋于稳定;同时,初始各向异性试样相较各向同性试样有更大的黏聚力,诱发各向异性主要影响试样内摩擦角,进而影响试样抗剪强度。 相似文献
13.
The local pore spaces in granular materials tend to be aligned parallel to the major principal stress direction upon particle mobilization. Manifestation of this response has been numerically validated in our previous studies with the aid of discrete element method modeling and image processing techniques during creep and shearing. We now extend the modeling of pore geometry, constructed with spherical particles, to assemblies of particle clumps. Two-dimensional simulations are performed for both loose and dense assemblies of spherical particles and particle clumps. Each particle packing is bound by rigid or flexible walls and subjected to biaxial compression and the particle mobilization effect on the evolution of pore orientation is explored. Randomly shaped pores surrounded by adjacent particles are geometrically quantified by Delaunay tessellation and fitted with ellipses. Results show that localization is apparent in dense assemblies, in particular for clumped particle packing, while loose assemblies exhibit diffusive failure. Small pores within well-defined shear bands tend to align either parallel to the direction of the shear band or perpendicular to the major principal stress. On the other hand, small pores within the blocks and large pores have a tendency to become elongate towards the major principal stress direction. This study reveals for the first time that pore orientation is dependent upon particle shape, pore size, and assembly conditions on the pore and global scales. 相似文献
14.
The stiffness characteristics of a packing of granules are influenced by the particle interactions at contacts, the void ratio, the co-ordination number and the packing structure. A stress-strain relationship for the packings of spheres is presented. The relationship explicitly includes the contact force-displacement law and the parameters characterizing the packing structure. The initial moduli computed using this relationship are compared with experimental measurements and empirical equations for sands. The theoretical results are also compared with experimental results on packings of glass balls. Closed-form solutions are derived for statistically isotropic packings under initial isotropic stress conditions. Numerical solutions for the stiffness properties are obtained for anisotropic initial stress conditions and anisotropic packing structures. 相似文献
15.
H. Kern 《Physics and Chemistry of Minerals》1979,4(2):161-171
The compressional and shear wave velocities in quarzite, granite, and granulite are determined at a fixed confining pressure of 2 kb as a function of temperature up to 720° C. The high-low quartz transition of the constituent quartz minerals is associated with a pronounced decrease in velocity of the compressional waves when approaching the transition and with a significant velocity increase after the transition. In contrast, the effect of the α-β transition on shear wave velocities is small. The drop of V P is explained by the elastic softening of structure of the constituent quartz minerals near the α-β transition and the opening of grain-boundary cracks, caused by the very high volumetric thermal expansion of the quartz relative to the other component minerals. The velocity increase in the β-field may be attributed to an elastic hardening of the quartz structure. Poisson ratios computed from the velocity data are anomalous for a solid: they become negative within the transition regime. The transition temperature, as indicated by the minimum velocities, is higher in the polycristalline rocks than is expected on grounds of single crystal behavior, and the discrepancy is more marked in granite than in quartzite. The shift of the transition temperature to higher values is explained by internal stresses that arise from the anisotropy of the thermal expansion and compressibility of individual grains and the differences in thermal expansion and compressibility between different component minerals. The role of the α-β quartz transition as a possible cause of low-velocity layers is discussed. 相似文献
16.
为了研究颗粒形状特征对砂土剪切模量的影响,选取4种形状不同的砂样（福建标准砂和人工石英砂）作为研究对象,通过扫描电镜获取其颗粒微观图像,使用Image Pro Plus软件和自编Matlab程序提取试样颗粒的形状特征。采用改进的半径角和轮廓指数综合描述颗粒偏离圆或椭圆的程度以及棱角变化程度,并基于这两个参数提出颗粒形状因子来综合表征颗粒的形状特征。之后在K0条件下通过弯曲元试验获得不同竖向荷载对应的4个试样的剪切模量,试验结果表明,砂土颗粒的形状因子与砂土的剪切模量具有良好的相关性。最后基于Hertz-Mindlin接触模型,推导出引入形状因子的砂土剪切模量理论计算公式,该计算公式与实测值吻合良好。 相似文献
17.
卵砾石地层被掘削时,其主要破坏模式并非一般的宏观整体剪切破坏,而是刀具切入卵砾石间的缝隙,将卵砾石颗粒剥离出原始地层,该过程较为契合颗粒离散元的物理力学假设。为确定掘削工况下的颗粒材料最优细观参数,对不同的颗粒接触法向刚度、接触刚度比、粒间摩擦系数、颗粒形状、颗粒尺寸等的颗粒材料开展了截割三维仿真试验,并分析研究了不同细观参数对掘削效果的影响。计算结果显示:颗粒接触法向刚度、接触刚度比的多种细观参数组合可以对应同一个宏观弹性模量值,接触刚度比大的细观参数组合的抗掘削能力更大。颗粒形状、粒间摩擦系数的多种细观参数组合可以对应同一个内摩擦角值,形状复杂的颗粒材料具有更大的抗掘削能力。在宏观参数相同的情况下,平均粒径更大的颗粒材料抗掘削能力更大。因此,利用颗粒离散元模拟掘削卵砾石地层问题时,除需保证虚拟颗粒材料的宏观整体剪切破坏响应与真实材料基本一致外,还需根据材料的抗掘削能力进一步标定细观参数,以获得更贴近实际情况的模拟效果。文章提出的方法可以为其他颗粒离散元掘削工况数值模拟中的参数标定提供参照依据。 相似文献
18.
砂石混合体由力学性质以及结构相差极大的材料组成,其组成的重塑地层易发生塌陷等问题,因此对砂石混合体力学特性的研究具有重要的工程意义。砾石形状是砂砾石力学特性研究的重要属性参数,但采用规则图形对砾石进行描述不能反映出其真实的力学性质,采用数字图像处理技术构建的砾石数据库能反映砾石真实形状并可对特定形状参数进行具体分析。由于砂石混合体的粒径分布较广,采用特征粒径等无法描述整体粒度分布,故本文结合分形理论构建砂石混合体的二重分形结构模型,通过粒度分维值反演出完整的级配分布曲线。考虑到砂石混合体离散型的特点,采用离散元软件进行直剪试验数值模拟并对细观结构进行分析,研究结果表明,砂石混合体一般具有2个粒度分维值:砂粒度分维值和砾石粒度分维值,砂、砾石粒度分维值越接近,抗剪强度和内摩擦角越大;当两者相等时,砂石混合体具有一重分维,此时均一性最好,抗剪强度和内摩擦角最大;轴向系数是形容砾石形状的一个重要参数,随着轴向系数的增加,砾石显示出明显的条状性,在直剪试验中抗转动能力增强、周围接触数量增加,导致抗剪强度和内摩擦角不断增加。 相似文献
19.
Gap-graded granular soils are used as construction materials worldwide, and their hydraulic conductivity depends on their relative content of coarse and fine grains, initial conditions, and particle shape. In this study, a series of constant head hydraulic conductivity tests were performed on gap-graded granular soils with different initial relative densities, fine contents, and particle shapes. The test results show that the hydraulic conductivity decreases with an increase in fine fraction and then remains approximately constant beyond the “transitional fine content.” The role of the structural effect on the hydraulic conductivity is different from that on the mechanical properties (such as stiffness and shear strength). This can be attributed to the degree of filling within inter-aggregate voids, disturbance of soil structure, and densified fine bridges between coarse aggregates. The equivalent void ratio concept was introduced into the Kozeny–Carman formula to capture the effect of fines (aggregates) on the “coarse-dominated” (“fine-dominated”) structure, and a simple model is proposed to capture the change of hydraulic conductivity of gap-granular soils. The model incorporates a structural variable to capture the effect of fines on “coarse-dominated” structure and coarse aggregates on “fine-dominated” structure. The performance of the model was verified with experimental data from this study and previously reported data compiled from the literature. The results reveal that the proposed model is simple yet effective at capturing the hydraulic conductivity of gap-graded granular soils with a wide range of fine contents, initial conditions, and particle shapes.
相似文献20.
运用数据挖掘技术进行了黄土湿陷性的预测挖掘,挖掘模型采用最小二乘支持向量机。建模过程中用主成份分析法进行数据的预处理,以剔除指标间的相关性,消除多指标信息冗余对挖掘模型的影响,并引入粒子群优化算法进行模型反演分析,确定最优参数。针对实际工程数据进行的预测挖掘表明：黄土的电阻率、剪切波速与土的结构特性、含水率、密度等指标密切相关,可较为全面地反映影响黄土湿陷性的因素;以电阻率、剪切波速及土层埋深作为模型的预测变量就可定量预测黄土的湿陷性;用所建模型和预测变量来预测黄土的湿陷性是可行的。 相似文献