共查询到20条相似文献，搜索用时 46 毫秒
1.
湿地水文是形成湿地的发生学因素,“淹埋深-历时-频率”(S, D, F)是表征湿地水文的特征指标。为了推进(S, D, F)阈值研究理论和方法的发展,总结了(S, D, F)阈值研究的一致结论:S阈值确定的原则是水饱和至地表;D阈值确定的原则是从水饱和开始到厌氧环境形成的时滞;F阈值应取≥50%。通过对这些一致结论的分析后认为:D阈值确定的原则存在着科学性问题;目前(S, D, F)阈值研究理论针对正常情况下湿地类型,不适合非正常情况下的湿地类型。为了科学地解决(S, D, F)阈值问题,必须构建新的(S, D, F)阈值确定的理论和方法,包括正常情况下和非正常情况(S, D, F)阈值确定的理论和方法以及(S, D, F)阈值科学性检验的理论和方法。 相似文献
2.
三维地理信息系统（3D—GIS）的发展现状及趋势 总被引：15，自引：0，他引：15
地理信息系统技术已经被大量应用于资源管理,环境监测,城市规划,土地管理及交通,水利,林业等领域,但ＧＩＳ技术的发展还远没有止境。人们已经不满足于传统的二维ＧＩＳ软件平台,取而代之的是空间的,立体的三维ＧＩＳ。但由于３Ｄ－ＧＩＳ包括了第三个坐标以及从平面到立体的换算,所以增加了大量的存储量和额外的数据量,因而时至今日,真正的３Ｄ－ＧＩＳ软件还很少。本文一方面介绍了３Ｄ－ＧＩＳ的概念,特点以及发展现状 相似文献
3.
RobertD.JACOBI 《《地质学报》英文版》2003,77(4):491-503
2-D and 3-D densities of fractures are commonly used in mining safety design, natural gas and oil production in fractured reservoirs, and the characterization of subsurface flow and transportation systems in fractured rocks. However, many field data sets are collected in 1-D frequency (f) (e.g., scanlines and borehole data). We have developed an ARC/ INFO-based technology to calculate fracture frequency and densities for a given fracture network. A series of numerical simulations are performed in order to determine the optimal orientation of a scanline, along which the maximum fracture frequency of a fracture network can be obtained. We calculated the frequency (f) and densities (both D1 and D2) of 36 natural fracture trace maps, and investigated the statistical relationship between fracture frequency and fracture density D1, i.e. D1=1.340f+ 0.034. We derived analytical solutions for converting dimensional density (D1) to non-dimensional densities (D2 and D3) assuming that fracture length distribution f 相似文献
4.
Joaquín García-Sansegundo P. Farias G. Gallastegui R. E. Giacosa N. Heredia 《International Journal of Earth Sciences》2009,98(7):1599-1608
In the Bariloche region, the Gondwanan basement consists of metamorphic and deformed igneous rocks intruded by Mesozoic and
Tertiary granitoids. Metasediments and amphibolites have been affected by three main deformation events (D1, D2 and D3). D1
(S1 foliation) is well shown preserved in the microlithons of the S2 regional foliation and in albite and garnet porphyroblasts.
Both foliations have been folded by upright open folds with associated crenulation (S3) locally developed in the D3 folds
hinge zones. An early-stage (syn-D1) subduction episode can be invoked based on evidence of high pressure (HP) metamorphism
in schists and amphibolites as well as on the presence of pre-collisional I-type granitoids. D2–D3 developed under regional
intermediate pressure–low pressure (IP–LP) metamorphic conditions. High temperature (HT) conditions were reached, as deduced
from regional migmatization and the intrusion of syn- to late-orogenic S-type granitoids. The transition from HP to IP metamorphic
conditions could be associated with the emplacement of NE directed crustal-scale thrusts during D2. 相似文献
5.
Three-Dimensional Modeling of Storm Surge and Inundation Including the Effects of Coastal Vegetation
Two-dimensional (2D) and three-dimensional (3D) hydrodynamic models are used to simulate the hurricane-induced storm surge and coastal inundation in regions with vegetation. Typically, 2D storm surge models use an enhanced Manning coefficient while 3D storm surge models use a roughness height to represent the effects of coastal vegetation on flow. This paper presents a 3D storm surge model which accurately resolves the effects of vegetation on the flow and turbulence. First, a vegetation-resolving 1DV Turbulent Kinetic Energy model (TKEM) is introduced and validated with laboratory data. This model is both robust enough to accurately model flows in complex canopies, while compact and efficient enough for incorporation into a 3D storm surge-wave modeling system: Curvilinear Hydrodynamics in 3D-Surface WAves Nearshore (CH3D-SWAN). Using the 3D vegetation-resolving model, three numerical experiments are conducted. In the first experiment, comparisons are made between the 2D Manning coefficient approach and the 3D vegetation-resolving approach for simple wind-driven flow. In a second experiment, 2D and 3D representations of vegetation produce similar inundations from the same hurricane forcing, but differences in momentum are found. In a final experiment, varying inundation between seemingly analogous 2D and 3D representations of vegetation are demonstrated, pointing to a significant scientific need for data within wetlands during storm surge events. This study shows that the complex flow structures within vegetation canopies can be accurately simulated using a vegetation-resolving 3D storm surge model, which can be used to assess the feasibility for future wetland restoration projects. 相似文献
6.
7.
The crystal liquid partitioning of Zr and Nb has been measured experimentally between diopsidic clinopyroxene and melts in the system Di-Ab-An. Nb was found to be excluded from diopside (D(Nb) is always less than 0.02). D(Zr) is quite variable, ranging from 0.05 to 0.45. D(Zr) is positively correlated with the Al content of both the melt and the pyroxene and is negatively correlated with temperature. Both D(Zr) and D(Nb) were found to be independent of oxygen fugacity. This implies that neither Zr or Nb suffer valence changes over a range of oxygen fugacities spanning both lunar and terrestrial conditions. 相似文献
8.
二维与三维边坡稳定性分析得到的安全系数存在着差异,讨论这种差异与滑体几何尺寸及土体强度参数间的变化规律及其形成机制,可为合理地评价边坡稳定性分析提供理论依据。针对均质三维边坡,利用基于滑面正应力修正模式的极限平衡法分析程序,定性地讨论滑体形态、长高比、坡比、土体强度参数等指标对二维与三维安全系数计算结果差异(以F3/F2表示)的影响,总结F3/F2与影响指标间的变化规律,分析变化规律形成的内在机制。从工程应用的角度,给出需要考虑该差异影响的分界标准。研究表明,F3/F2随着长高比L/H、内摩擦角?及坡比m的增大逐渐减小,随着黏聚力c的增大逐渐增大;对于满足下列条件之一的边坡,宜采用三维安全系数来评价其稳定性,(1) L/H ≤ 5的滑坡体;(2) 5< L/H ≤ 10且 c > 25 kPa(或? < 15°,或m < 1.0) 的滑坡体。研究成果可为合理评价边坡稳定性分析方法提供参考。 相似文献
9.
溪洛渡地下洞室群地震响应的二维及三维数值模型比较分析研究 总被引：5，自引：4，他引：1
验证了显示有限差分方法进行地震波衍射分析的可行性,并基于此方法分别建立了二维（2D）及三维（3D）数值模型,对溪洛渡地下洞室群的地震安全性进行了分析与讨论。研究表明,在唐山余震天津医院地震波作用下洞室群处于安全状态。对比2D及3D数值计算结果可以发现,2D数值模型计算效率远远高于3D数值计算模型;对于建造于完整性较好、强度较高的岩体介质中地下洞室群而言,可以采用2D数值模型粗略估算洞身部分的地震响应,而洞室端面的动力响应则必须通过建立3D模型来进行分析。 相似文献
10.
山西忻定盆地断层崩积楔OSL年龄及其对古地震事件的指示意义 总被引：4，自引：1，他引：3
断层陡坎崩积楔是断层活动的直接产物,是古地震事件的重要证据。对于崩积楔的准确定年是解决古地震事件的关键。近几年得益于释光技术与方法的发展,简单多片再生法(SMAR)已成功应用于130 ka以来黄土类型沉积物的定年。以山西忻定盆地五台山北麓南峪口探槽为例,对该探槽中的两期崩积楔（D1、D2）各个部位不同类型沉积物进行系统采样,对样品采用细颗粒石英(4~11 μm)简单多片再生法(SMAR)进行光释光(OSL)测年,根据光释光年龄,得出如下认识：(1)D1、D2崩积楔演化过程与常规的正断层崩积楔演化模式有些差别;(2)D1崩积楔古地形面由断层处向外延伸堆积而成,D2崩积楔古地形面由水平堆积形成,且较D1厚;（3）D1崩塌结束后经历较强的水流作用;(4)两次古地震事件分别发生于(42.77±2.46)～(61.72±282) ka、(32.80±2.87)～(47.92±0.94) ka,时间间隔为10～15 ka。 相似文献
11.
Petrogenesis and deformation history of the lawsonite‐bearing blueschist facies metabasalts of the Diamante‐Terranova oceanic unit (southern Italy) 
下载免费PDF全文
下载免费PDF全文 L. Fedele F. D'A. Tramparulo S. Vitale P. Cappelletti E. P. Prinzi S. Mazzoli 《Journal of Metamorphic Geology》2018,36(6):691-714
The Neotethyan oceanic Diamante‐Terranova unit (DIATU; southern Apennines–Calabria–Peloritani Terrane system) includes basic rocks that during the Cenozoic were subducted and metamorphosed to lawsonite‐blueschist facies conditions. Petrological and structural observations (both at the meso‐ and micro‐scale) show that lawsonite growth was continuous during three distinctive ductile deformation stages (D1–D3). These likely occurred close to the metamorphic peak, estimated at 350–390°C and 0.9–1.1 GPa, producing an equilibrium assemblage made of blue Na‐amphibole, lawsonite, chlorite and pumpellyite. Locally, pods dominated by quartz and epidote (plus chlorite, calcite and green Ca‐amphibole) developed at similar conditions (350–370°C, 0.8–0.9 GPa). Post‐peak evolution during the final exhumation of the DIATU along the subduction channel, also consisted of three deformation stages, defined by folding (D4) and normal faulting (D5) and finally by strike‐slip faulting (D6), affecting both the blueschist unit and the unconformably overlying Tortonian conglomerates. Vorticity analysis on syn‐tectonic lawsonite crystals indicates that severe flattening occurred during the D2 stage, with a significant secondary non‐coaxial strain component along the W–E plane. This is associated with an eastward tectonic vergence, consistent with the subsequent D3 and D4 folding stages characterized by a dominant ENE tectonic transport. It is suggested that exhumation started from the D2 stage and continued during D3 at similar HP/LT metamorphic conditions. The widespread occurrence of unreacted lawsonite crystals suggests that exhumation was very fast and supports the idea that concurrent ductile deformation might play a role in its preservation. 相似文献
12.
本文以阿尔金造山带南缘出露的高镁赞岐质闪长岩为研究对象,通过系统的野外地质工作、显微岩相学、年代学和全岩地球化学分析,探讨其成因类型和源区性质,限定了阿尔金造山带构造演化格架。闪长岩LA-ICP-MS锆石U-Pb测年结果表明其形成年龄为(445±3) Ma,属晚奥陶世。地球化学数据显示:闪长岩Al2O3含量为15.11%~16.19%,且具有高MgO(3.93%~5.29%)和K2O(1.68%~2.67%)含量的特征,属于高镁钙碱性准铝质岩石;闪长岩具有较高的Cr(29.3×10-6~140×10-6)、Ni(27.1×10-6~43.5×10-6)、Ba(606×10-6~936×10-6)、Sr(513×10-6~734×10-6)和Y(26.4×10-6~31.1×10-6)含量,与典型的高镁赞岐岩类地球化学特征一致;稀土配分图和微量元素蛛网图显示闪长岩样品富集轻稀土元素和大离子亲石元素(如Rb和K),而亏损高场强元素(如Nb、Ti和Zr),表现出与俯冲带环境岩浆岩相似的性质;高Ti/Zr比值(48~60)与Mg#(46.74~53.06)、高Cr(29.3×10-6~140×10-6)与高Ni(27.1×10-6~43.5×10-6)含量等暗示闪长岩岩浆源区来自遭受俯冲组分交代过的富集岩石圈地幔。岩石成因分析表明,阿尔金造山带南缘晚奥陶世高镁赞岐质闪长岩是后碰撞构造环境下俯冲板片断离诱发地幔楔发生减压熔融而形成,代表了早古生代最强烈的区域性幔源基性岩浆侵入事件。 相似文献
13.
《Journal of South American Earth Sciences》2000,13(4-5):389-402
The Teloloapan volcanic arc in SW Mexico represents the easternmost unit of the Guerrero Terrane. It is overthrust by the Arcelia volcanic unit and is thrust over the Guerrero–Morelos carbonate platform. These major structures result from two closely related tectonic events: first, an eastward verging, ductile deformation (D1) characterized by an axial-plane schistosity (S1) supporting an E–W trending mineral stretching lineation (L1) and associated with synschistose isoclinal, curvilinear folds (F1). Numerous kinematic indicators such as asymmetrical pressure-shadows, porphyroclast systems, and micro-shear bands (S–C structures) indicate a top-to-the-east shear along L1. This first deformation was followed by another ductile event (D2) that produced a crenulation cleavage (S2) associated with westward overturned folds (F2), hence showing that the vergence of D2 is opposite to that of D1. Regionally, both D1 and D2 deformations have been identified east and west of the Teloloapan unit, in the Arcelia volcanic rocks as well as in the Mexcala flysch of Late Cretaceous age overlying the Guerrero–Morelos platform. This implies that all three units were deformed and thrust simultaneously, during the Late Cretaceous or Paleocene, prior to the deposition of the overlying, undeformed Eocene red beds of the Balsas group. 相似文献
14.
上下重叠隧道施工时,后挖隧道施工过程对先建隧道是一种“卸载”作用,受此影响,先建隧道的衬砌管片将朝后挖隧道方向变形,但这种影响作用是暂时的。以深圳地铁3号线老街站-晒布路站区间重叠隧道工程为背景,采用三维有限元数值计算和室内离心模型试验相结合的手段,对上部隧道（后挖隧道）施工引起的下方已建隧道纵向变位进行了研究。结果表明,后挖隧道施工引起的先建隧道不均匀沉降主要出现在约掌子面前方3.5D（D为隧道直径）到后方3D的范围内。基于此,探讨了应对这种暂时纵向效应的对策措施,主要包括临时压重和临时内撑。在先建隧道位于掌子面后方(0~1)D、(1~2)D、(2~3)D范围内分别设置20 t/3 m、20 t/6 m、20 t/9 m的临时压重,且在掌子面前方4D和后方4D范围内为先建隧道设置临时内撑,可以较好地减小由于后挖隧道施工引起的先建隧道附加不均匀变形。 相似文献
15.
作为煤矿安全高效地质保障系统的核心技术之一,我国煤田地震勘探技术已经形成了从一维地震(1D)、二维地震(2D)到三维地震(3D)的技术系列,实现了从资源勘探向采区勘探、从构造勘探向岩性勘探的技术进步,而四维地震(4D)将进一步实现地震勘探从静态探测到动态探测的技术跨越。基于空间-时间维度的概念,在1D到4D地震勘探4个发展阶段的基础上,提出了1.5D(如非零偏移距VSP)、2.5D(如宽线二维地震)和3.5D(如三维地震动态解释)等3个过渡阶段,给出了1D与1.5D、2D与2.5D、3D与3.5D以及4D等7个不同阶段的时间-空间特征。研究发现:(1)煤田地震勘探从低维到高维、从空间维到时空维的维度增加,使得地震勘探所获地下信息量出现指数级增长,地震勘探解决地质问题的精度相应得到了显著的提高,这是煤田地震勘探技术不断进步的内在引擎;(2)基础理论研究的厚积薄发、地震勘探仪器的升级换代和煤矿开采技术的需求驱动,是煤田地震勘探技术持续进步的外部驱动力;(3)跨学科、跨行业和跨部门的学科交叉与技术融合,加速了煤田地震勘探技术的迭代升级。 相似文献
16.
Geology of the Ranger Uranium Mine, Northern Territory, Australia: structural constraints on the timing of uranium emplacement 总被引：1，自引：0，他引：1
The geology of the No 1 and 3 pits at the Ranger Mine in the Pine Creek Inlier (PCI) of Australia is dominated by Palaeoproterozoic volcanic, carbonate and sedimentary sequences that unconformably overlie Archaean granitic gneiss of the Nanambu Complex (2470±50 Ma). These sequences are folded, faulted and sheared, and crosscut by east-trending granite (sensu stricto) dykes and pegmatite veins, and gently dipping N–NE trending mafic dykes of the Oenpelli Dolerite (1690 Ma). Regional metamorphism is to greenschist facies and contact metamorphism is to hornblende-hornfels facies.The rocks of the Ranger Mine have been subjected to at least two phases of ductile–brittle deformation (D2–D3) and one phase of brittle deformation (D4). These events were preceded by regional diastathermal or extension-related metamorphism (D1) and the development of an ubiquitous bedding-parallel cleavage (S1).D2 resulted in the development of NNE–NNW trending mesoscopic folds (F2) and a network of thrusts and dextral reverse shears. The modelled palaeo-stress directions for the emplacement of pegmatite veins suggests that they formed early in D2. D3 resulted in the development of WNW–NW trending mesoscopic folds (F3), a weakly defined axial planar cleavage (S3) and sinistral reactivation of D2 shears. D2–D3 are correlated with deformation during the Maud Creek Event of the Top End Orogeny (1870–1780 Ma), while the emplacement of granite dykes and pegmatite veins is correlated with emplacement of regional granites at 1870–1860 Ma.D4 is associated with brittle deformation and resulted in the development of normal faults and fault breccias during a period of east–west extension. This event is correlated with regional east–west extension during deposition of Palaeo- to Mesoproterozoic platform sequences.The sequence of tectonic events established in this study indicates that uranium-bearing ore shoots in the Ranger No 1 and 3 pits formed during extension in D4, and after emplacement of the Oenpelli Dolerite at 1690 Ma. However, the currently accepted 1737±20 U–Pb Ma age places the mineralising event at time of regional post-orogenic erosion, after the Top End Orogeny and before emplacement of the Oenpelli Dolerite and extension in D4. The U–Pb age is not consistent with Sm–Nd ages for primary uranium mineralisation at Nabarlek and Jabiluka at 1650 Ma [Econ. Geol. 84 (1989) 64] and does not concur with currently accepted regional tectonic data of Johnston [Johnston, J.D., 1984. Structural evolution of the Pine Creek Inlier and mineralisation therein, Northern Territory, Australia. Unpublished PhD Thesis, Monash University, Australia], Needham et al. [Precambrian Res. 40/41 (1988) 543] and others. Consequently, the absolute age of uranium mineralisation at the Ranger Mine is open. 相似文献
17.
经历剪切变形历史的岩石节理表面粗糙特性分析 总被引：5，自引：1，他引：5
基于两类岩石节理剪切试验，采用非接触式激光测距仪，实测了剪切前后节理表面粗糙数据，统计分析了岩石节理表面粗糙特性的三维粗糙参数的物理含义，并将这些参数与相应的二维参数进行了充分比较。结果表明，三维参数与二维参数间存在的近似线性关系，而多个三维参数相对比单一的二维参数更全面有效地描述了节理表面粗糙特性。 相似文献
18.
Field studies in the Kandy district and elsewhere in the Highland Series demonstrate that these granulite facies rocks have been repeatedly deformed. The major folds (D3) postdate one and possibly two phases of isoclinal folding (D1 and D2) during which the main L-S fabric was formed. The main metamorphic peak probably occurred during these early phases, around 2200 Ma ago. The D3 episode appears to have predated the formation of the Vijayan gneisses at 1200 Ma. Hornblende-bearing gneisses mainly restricted to synformal basins are regarded as the result of local partial melting and mobilization during D3. 相似文献
19.
探讨了地质勘探线剖面三维坐标与剖面图二维坐标相互转换方法及其实现过程,建立了数学模型,并通过计算实例进行了验证。主要作法是,根据剖面图的特性选择勘探线剖面地表迹线与勘探基线所在垂直面的交点为转换计算基准点(B),以勘探线剖面内过基准点(B)的水平直线(L)为旋转轴,将勘探线剖面旋转至水平位置;再以基准点(B)为旋转点,将勘探线剖面在水平面内旋转至水平直线(L)成东西向,建立剖面内空间要素旋转前后的关系式,实现三维坐标向二维坐标转换。按相反的操作过程,已知转换后剖面图上点的二维坐标,可以计算出剖面上对应点的三维空间坐标,实现二维坐标向三维坐标转换。 相似文献
20.
A three-dimensional (3D) nuclear magnetic resonance (NMR) spectrum can simultaneously provide distributions of longitudinal relaxation time (T1), transverse relaxation time (T2), and diffusivity (D); thus, it greatly improves the capacity of fluid identification, typing, and quantitative evaluations. However, several challenges that significantly hinder the widespread application of this technique remain. The primary challenges are the high time and memory costs associated with the current 3D NMR inversion algorithms. In addition, an activation sequence optimization method for 3D NMR inversions has not been developed. In this paper, a novel inversion method for 3D NMR spectra and a detailed optimization method for activation sequences and acquisition parameters were proposed. The novel method, namely randomized singular value decomposition (RSVD) inversion algorithm, can reduce memory requirements and ensure computational efficiency and accuracy. Window averaging (WA) technique was also adopted in this study to further increase computational speed. The optimized method for pulse sequences is mainly based on projections of the 3D NMR spectra in the two-dimensional (2D) and one-dimensional (1D) domains. These projections can identify missing NMR properties of different fluids. Because of the efficiency and stability of this novel algorithm and the optimized strategy, the proposed methods presented in this paper could further promote the widespread application of 3D NMR. 相似文献