首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
New structural, metamorphic, finite strain, and kinematic vorticity data for mylonitic granitic rocks from northern thrust in Wadi Mubarak reveal a history of deformation reflecting different tectonic regimes. The vorticity analysis of porphyroclasts was determined in high temperature mylonites. The kinematic vorticity number for the mylonitic granitic samples in the northern thrust in Wadi Mubarak range from 0.66 to 0.90, and together with the strain data suggest deviations from simple shear. It is concluded that nappe stacking occurred early during the underthrusting event probably by brittle imbrication and that ductile strain was superimposed on the nappe structure during thrusting. The accumulation of ductile strain during thrusting was not by simple shear and involved a component of vertical shortening, which caused the subhorizontal foliation in the northern thrust in Wadi Mubarak and adjacent units.  相似文献   

2.
The present study aims to evaluate a relationship between the mineralogy and structural analysis in the Halaban area and to document the tectonic evolution of Halaban and Al Amar faults. The collected samples were taken from deformed granitiods rocks (such as granite, gneisses and tonalite), metasedimentary, metavolcanic, metagabbro and carbonate rocks are trend to NE-SW with low dip angle in the Halaban area. These samples were 8 from granite, 14 metagabbro, 6 metavolcanics, 5 tonalite, 6 metasedimentary, 10 gneisses and 8 carbonate rocks. Our results are described for the different axial ratios of deformed rocks as the following: XZ sections range from 1.10 to 4.60 in the Fry method and range from 1.70 to 2.71 in the Rf/? method. YZ sections range from 1.10 to 3.34 in the Fry method and range from 1.62 to 2.63 in the Rf/Phi method. In addition, XY sections range from 1 to 3.51 in the Fry method and range from 1 to 1.27 in the Rf/? method for deformed granite rocks, metasedimentry rocks, and metagabbro. The stretch axes for measured samples in the X direction axes (SX) variety from 1.06 to 2.53 in the Fry method and vary from 1.20 to 1.45 in the Rf/? method. The values of the Y direction axes (SY) vary from 0.72 to 1.43 in the Fry method, which indicates contraction and extension in this direction and vary from 1.13 to 1.37 in the Rf/? method which indicates extension in this direction. Furthermore, the Z direction axes (SZ) varies from 0.09 to 0.89 in the Fry method and from 0.52 to 0.71 in the Rf/? method. The stretches axes in the Z direction (SZ) show a vertical shortening about 11% to 91% in the Fry method and show vertical shortening about 29% to 48% in the Rf/? method. The studied rock units are generally affected by brittle-ductile shear zones, which are sub-parallel to parallel NW or NNW trend. It assumed that different rock types of have similar deformation behavior. Based on these results, it is concluded that the finite strain is accumulated during the metamorphism after that was started the deformation by thrusting activity. The contacts between the different rock types were deformed during thrusting under semi-brittle to ductile deformation conditions by simple shear. A component of vertical shortening is also involved causing subhorizontal foliation in the Halaban area.  相似文献   

3.
The use of porphyroclasts rotating in a flowing matrix to estimate mean kinematic vorticity number (Wm) is important for quantifying the relative contributions of pure and simple shear in wall rocks alterations of shear zone at Dungash gold mine. Furthermore, it shows the relationship between the gold mineralization and deformation and also detects the orientation of rigid objects during progressive deformation. The Dungash gold mine area is situated in an EW-trending quartz vein along a shear zone in metavolcanic and metasedimentary host rocks in the Eastern Desert of Egypt. These rocks are associated with the major geologic structures which are attributed to various deformational stages of the Neoproterozoic basement rocks. We conclude that finite strain in the deformed rocks is of the same order of magnitude for all units of metavolcano-sedimentary rocks. The kinematic vorticity number for the metavolcanic and metasedimentary samples in the Dungash area range from 0.80 to 0.92, and together with the strain data suggest deviations from simple shear. It is concluded that nappe stacking occurred early during the underthrusting event probably by brittle imbrication and that ductile strain was superimposed on the nappe structure during thrusting. Furthermore, we conclude that disseminated mineralization, chloritization, carbonatization and silicification of the wall rocks are associated with fluids migrating along shearing, fracturing and foliation of the metamorphosed wall rocks.  相似文献   

4.
Finite-strain was studied in the mylonitic granitic and metasedimentary rocks in the northern thrust in Wadi Mubarak belt to show a relationship to nappe contacts between the old granitic and metavolcano-sedimentary rocks and to shed light on the heterogeneous deformation for the northern thrust in Wadi Mubarak belt. We used the Rf/ϕ and Fry methods on feldspar porphyroclasts, quartz and mafic grains from 7 old granitic and 7 metasedimentary samples in the northern thrust in Wadi Mubarak belt. The finite-strain data shows that old granitic rocks were moderate to highly deformed and axial ratios in the XZ section range from 3.05 to 7.10 for granitic and metasedimentary rocks. The long axes (X) of the finite-strain ellipsoids trend W/WNW and E/ENE in the northern thrust in Wadi Mubarak belt. Furthermore, the short axes (Z) are subvertical associated with a subhorizontal foliation. The value of strain magnitudes mainly constants towards the tectonic contacts between the mylonitic granite and metavolcano-sedimentary rocks. The data indicate oblate strain symmetry (flattening strain) in the mylonitic granite rocks. It is suggested that the accumulation of finite strain was formed before or/and during nappe contacts. The penetrative subhorizontal foliation is subparallel to the tectonic contacts with the overlying nappes and foliation was formed during nappe thrusting.  相似文献   

5.
华北克拉通构造演化及破坏机制一直是地学界的热点话题,中生代华北克拉通东部主要受扬子板块的俯冲使区域内岩浆-变质事件频繁,形成一系列近EW向构造,包括位于辽西地区的一条中生代NEE向台里韧性剪切带。该韧性剪切带中发育有S-C组构、旋转碎斑、石香肠、长英质脉体等丰富的构造现象。通过野外观测和室内综合分析,识别出其中长英质脉体的演化序列为"分异脉→香肠化→透镜化→碎斑化→细粒化→丝带化"六个变形阶段。对各变形阶段样品切制垂直面理平行线理的薄片,并对薄片基质层进行二维有限应变测量分析与统计,包括真应变差(ε_1-ε_2)等值线图、岩层厚度比(S)等值线图、运动学涡度(W_k)等值线图。其中W_k在演化前期主要小于0.71,演化中期主要大于0.71,演化后期主要小于0.71,表明长英质脉体演化过程前期主要为纯剪切作用,中期为简单剪切作用,后期为纯剪切作用,同时W_k为正值和S小于1反映研究区内韧性剪切带在伸展减薄的动力学背景下形成,这对了解华北克拉通东部中生代构造演化提供了新的约束。  相似文献   

6.
Neoproterozoic rocks, Oligocene to Neogene sediments and Tertiary Red Sea rift-related volcanics (Harrat) are three dominant major groups exposed in the Jeddah tectonic terrane in Western Arabia. The basement complex comprises amphibolites, schists, and older and younger granites unconformably overlain by a post-amalgamation volcanosedimentary sequence (Fatima Group) exhibiting post-accretionary thrusting and thrust-related structures. The older granites and/or the amphibolites and schists display mylonitization and shearing in some outcrops, and the observed kinematic indicators indicate dextral monoclinic symmetry along the impressive Wadi Fatima Shear Zone. Finite strain analysis of the mylonitized lithologies is used to interpret the deformation history of the Wadi Fatima Shear Zone. The measured finite strain data demonstrate that the amphibolites, schists, and older granites are mildly to moderately deformed, where XZ (axial ratios in XZ direction) vary from 2.76 to 4.22 and from 2.04 to 3.90 for the Rf/φ and Fry method respectively. The shortening axes (Z) have subvertical attitude and are associated with subhorizontal foliation. The data show oblate strain ellipsoids in the different rocks in the studied area and indication bulk flattening strain. We assume that the different rock types have similar deformation behavior. In the deformed granite, the strain data are identical in magnitude with those obtained in the Fatima Group volcanosedimentary sequence. Finite strain accumulated without any significant volume change contemporaneously with syn-accretionary transpressive structures. It is concluded that a simple-shear deformation with constant-volume plane strain exists, where displacement is strictly parallel to the shear plane. Furthermore, the contacts between various lithological units in the Wadi Fatima Shear Zone were formed under brittle to semi-ductile deformation conditions.  相似文献   

7.
Tectonic lozenges are elongate bodies bounded by relatively more deformed rocks. The focus of this study is on the 2-D structure of tectonic lozenges developed during ductile shear in rocks with a pre-existing mechanical anisotropy. On the basis of a detailed analysis of shear zones in foliated rocks from the Cap de Creus area (Variscan of the eastern Pyrenees), five mechanisms to explain the development of different types of lozenges in foliated rocks are suggested. These mechanisms are explained on the basis of the orientation of the previous foliation relative to the bulk shearing direction. It is shown that the prevailing mechanism does not majorly depend on the bulk kinematics but on the angular relationship between the pre-existing foliation and the bulk kinematic axes, and on shear zone interaction. This has implications on the use of lozenge shapes in tectonic interpretations. The fact that there is a wide range of initial orientations, propagation modes and coalescence types implies that the final lozenge geometry is not univocally related neither to the type of strain nor to the kinematic regime.  相似文献   

8.
The estimation of finite strain in rocks is fundamental to a meaningful understanding of deformational processes and products on all scales from microscopic fabric development to regional structural analyses. The Rf/φ and Fry methods on feldspar porphyroclasts and mafic grains from 5 granite, 1 metavolcanic, 3 metasedimentary and 1 granodiorite samples were used in Wadi El Falek region. Finite-strain data shows that a high to moderate range of deformation of the granitic to metavolcano-sedimentary samples and axial ratios in the XZ section range from 1.60 to 4.10 for the Rf/φ method and from 2.80 to 4.90 for the Fry method. Furthermore, the short axes are subvertical associated with a subhorizontal foliation. We conclude that finite strain in the deformed granite rocks is of the same order of magnitude as that from metavolcano-sedimentary rocks. Furthermore, contacts formed during intrusion of plutons with some faults in the Wadi El Falek area under brittle to semi-ductile deformation conditions. In this case, finite strain accumulated during superimposed deformation on the already assembled nappe structure. It indicates that the nappe contacts formed during the accumulation of finite strain.  相似文献   

9.
Geometrical relations between quartz C-axis fabrics, textures, microstructures and macroscopic structural elements (foliation, lineation, folds…) in mylonitic shear zones suggest that the C-axis fabric mostly reflects the late-stage deformation history. Three examples of mylonitic thrust zones are presented: the Eastern Alps, where the direction of shearing inferred from the quartz fabric results from a late deformation oblique to the overall thrusting; the Caledonides nappes and the Himalayan Main Central Thrust zone, where, through a similar reasoning, the fabrics would also reflect late strain increments though the direction of shearing deduced from quartz fabric remains parallel to the overall thrusting direction. Hence, the sense of shear and the shear strain component deduced from the orientation of C-axis girdles relative to the finite strain ellipsoid axes are not simply related nor representative of the entire deformation history.  相似文献   

10.
辽西兴城—台里地区发育系列花岗质岩石,强烈构造变形特征均显示其具有韧性剪切带的特点。对剪切带北段进行详细宏微观构造解析,结合岩石变形强度差异性分析、有限应变测量、石英C轴EBSD测试以及古差异应力值估算等研究,结果表明剪切带内花岗质片麻岩和眼球状花岗质片麻岩具有NEE向左行剪切变形特征,变形岩石为S-L构造岩,应变类型属于平面应变,古差异应力值介于30~40 MPa之间。长石-石英矿物温度计以及石英C轴EBSD组构指示剪切带以中低温变形为主,温度在400℃~500℃,属绿片岩相变质,具中-低温韧性剪切带特征。韧性剪切带内普遍存在变形分解现象,弱变形带内岩石残斑含量较高,眼球状构造和S-C组构较为发育;强变形带岩石残斑含量较低,剪切面理较为发育,糜棱面理发育较弱或者不发育。  相似文献   

11.
吴林波  曾佐勋  高曦 《现代地质》2011,25(4):768-777
鄂东南铁山是亚洲首个发现骨节状石香肠构造的地区。以该区不对称骨节状石香肠构造为研究对象,利用惯量椭圆法对其基质层进行有限应变测量,获得真应变差、运动学涡度等相关参数及有限应变椭圆长轴展布方位的分布图。对所获数据资料研究表明:该不对称骨节状石香肠构造基质层的应变受其能干层控制,有限应变值与其离能干层的距离趋于负相关,且与其矿物颗粒粒径呈负相关,在平行于石香肠构造伸展方向上基质层有限应变分布不均;石香肠体附近与之相近规模的变形构造可使其相应基质中的应变分布紊乱;该不对称骨节状石香肠构造是由早期平行于层面简单剪切叠加晚期平行层面伸长、垂直层面压缩的纯剪切作用形成。与不对称鱼嘴状石香肠构造对比研究表明,两者基质层中简单剪切与纯剪切的分布均分别与其相对增厚与减薄区段对应,而两者形态的不同主要与石香肠体不连续处充填物的能干性不同有关,再次表明两者均是较好的岩石流变学标志。  相似文献   

12.
Quartz c-axis fabrics are widely used to determine the shear plane in ductile shear zones, based upon an assumption that the shear plane is perpendicular to both the central segment of quartz c-axis crossed girdle and single girdle. In this paper the development of quartz c-axis fabric under simple-pure shear deformation is simulated using the visco-plastic self-consistent (VPSC) model so as to re-examine this assumption. In the case of no or weak dynamic recrystallization, the simulated crossed girdles have a central segment perpendicular or nearly perpendicular to the maximum principal finite strain direction (X) and the XY finite strain plane, and at a variable angle relative to the imposed kinematic framework that is dependent on the modeled flow vorticity and finite strain. These crossed girdles have a symmetrical skeleton with respect to the finite strain axes, regardless of the bulk strain and the kinematic vorticity, and rotate in a way similar to the shear sense with increasing bulk strain ratio. The larger the vorticity number the more asymmetrical their legs tend to be. In the case of strong dynamic recrystallization and large bulk strain, under simple shear the crossed girdle switches into single girdles, sub-perpendicular to the shear plane, by losing the weak legs. The numerical results in our models do not confirm the above-mentioned assumption.  相似文献   

13.
A field example of strain partitioning has been analysed along the Nurra–Asinara transect of the NW Sardinian Variscan chain (Italy). The section in the Nurra–Asinara area is in a continuous sequence of tectono-metamorphic complexes made of low- to high-grade metamorphic rocks affected by a polyphase tectonic history. The principal fabric of the area is controlled by a D2 progressive deformation phase in which the strain is partitioned into folds and shear zone domains. The D2 stretching lineation and shear sense show a clear change from south to north. The principal meso- and micro-structures, vorticity gauges and a quantitative kinematic analysis of local strain suggest that the D2 kinematic history could be envisaged as an oblique heterogeneous deformation similar to the transpressive systems described in ancient and modern settings elsewhere. Using a simple kinematic model we also propose that both a transpressive system followed by “thrusting” or a partitioned transpressive system could be responsible for the fabric distribution and strain accumulation described in the study transect.  相似文献   

14.
This study highlights the usefulness of anisotropy of magnetic susceptibility data from a deformed granitoid in deciphering its kinematic evolution vis-à-vis shear zone. Data are presented from the Chakradharpur Granitoid (CKPG) that lies to the north of the northerly dipping, ENE–WSW striking Singhbhum Shear Zone (SSZ; eastern India). Whilst the foliation recorded in the field in some parts of the granitoid is parallel to the SSZ, the magnetic foliation is N54°E/90° (mean orientation). It is suggested that the magnetic fabric provides a window into an evolutionary stage prior to the final shearing/thrusting event, the evidence of which is preserved on the mesoscopic scale. It is envisaged that during the initial stages of deformation there was simple shear along the evolving SSZ that resulted in sinistral strike-slip movement; the vorticity axis at this stage was steeply plunging and sense of rotation was anticlockwise. Space was generated in a direction ∼N25°E (perpendicular to maximum-Instantaneous Stretching Axis) into which CKPG emplaced synchronously with regional deformation and evolving SSZ. With continued deformation, there was thrusting along the SSZ. The vorticity axis flipped to a sub-horizontal orientation, thus leading to the development of down-dip stretching lineations and sheath folds within the SSZ. However, at the same time, the vorticity axis responsible for fabric evolution within the syntectonically crystallizing/cooling CKPG was steeply plunging with clockwise rotation. The magnetic foliation (mean orientation N54°E/90°) developed during the final stage of syntectonic crystallization. However, deformation in the region and thrusting along the SSZ continued even after the CKPG had fully crystallized and solidified, which led to the development of the ENE–WSW striking mesoscopic foliation that is parallel with the SSZ. We propose that the angle between the magnetic foliation and the SSZ/foliation recorded in the field, enables to decipher the kinematic vorticity number of flow responsible for fabric evolution of the CKPG. It is concluded that transpression was an important mechanism, and during regional deformation, whilst the SSZ developed structures by dominantly simple shear, the CKPG underwent dominantly pure shear.  相似文献   

15.
The present study focuses on the gold mining in Mahd Ad Dahab region of Saudi Arabia. The study aims to assess the spatial relationship between tectonic contacts in Mahd Ad Dahab area and to provide a meaningful hypothesis relating gold metallogeny to the evolution of the Arabian Shield. Distribution and localization of gold occurrences in the study area was envisaged based on the different styles of microstructures and the major deformation phases affecting the area. The detailed petrographical and mineralogical investigations indicate that the metavolcanic rocks at the Mahd Ad Dahab gold mine area can be classified into metabasalt, metaandesite, and the felsic varieties (metadacite, metarhyodacite and metarhyolite) associating their metapyroclastics (conglomerate and tuffs). Furthermore, quartz forms allotriomorphic crystals which exhibit wavy extinction, deformational lamina and foliation due to subsequent deformations. Furthermore, we conclude that finite strain in the deformed rocks is of the same order of magnitude for all units of metavolcano-sedimentary rocks. Furthermore, contacts formed during intrusion of plutons with some faults in the Mahd Ad Dahab area under brittle to semi-ductile deformation conditions. In this case, finite strain accumulated during superimposed deformation on the already assembled nappe structure. It indicates that the contacts formed during the accumulation of finite strain.  相似文献   

16.
岩石磁化率椭球体的三个轴与应变椭球体的三个轴方向相平行,并具有一定的共构关系.变形岩石的磁组构参数P、T、F、L以及磁化率椭球体主张量方向等可以用来定量地表征岩石变形的性状及期次.本文通过实测和计算27个样品的磁组构参数,研究了博白-合浦断裂带的变形性状与期次,结果表明:博白-合浦断裂带大致经历了三期构造变形作用,不同时期具不同性质的构造变形.变形性状分别表现为韧性、韧-脆性及脆性变形,应变行为分别表现为平面、非平面和线性应变.  相似文献   

17.
秦岭洛南-栾川断裂带具有左旋斜向俯冲的运动学特征,其产状一般为107°/N∠65°。华南板块的俯冲方向为80°,俯冲角度为42°;华南板块运动方向为42°,运动方向与华北板块南部边界的夹角为65°,汇聚角25°。秦岭北缘强变形带内褶皱枢纽延伸方向为290°,与洛南-栾川断裂带存在15°的夹角。逆冲断层走向与褶皱的枢纽方向基本一致,大多数断层与洛南-栾川断裂带有相同的运动学极性,性质为左行平移逆断层。平移正断层走向主要为NE SW,断层性质、展布方向、运动学特征与板块汇聚的应力作用方式吻合;片理、片麻理走向117°,与洛南-栾川断裂带走向夹角为10°。在垂直剪切带的剖面上,系统观察岩石变形特征,测量面理产状,进行岩石有限应变测量,岩石非共轴递进变形分析结果表明:秦岭北缘强变形带内由南向北面理走向与剪切带走向的夹角逐渐增大,岩石剪应变量依次递减,造山带变形具有“三斜对称”特点。  相似文献   

18.
INTRODUCTIONIn recent years a num ber of detailed m ineralogical- petro-logical studies have been carried out on the UHP and HPmetamorphic belts in the Dabie- Sulu region,central China(see review papers by Jahn,1999;Ernst and L iou,1999;Wallis et al.,1999;Hacker et al.,1996 ;L iou et al.,1996 ;Cong et al.,1994) . Various tectonic evolution models for theUHP belt in the Dabie- Sulu region have been constructed(e.g.,Webb etal.,1999;Hacker et al.,1996 ;Cong et al.,1994) .However,as …  相似文献   

19.
Although calcite tectonites are widespread in nature their use to quantify flow vorticity is limited. We use new (micro-)structural, petrofabric and vorticity data to analyse the kinematics of flow in outcrop-scale calcite mylonite zones. These zones are genetically related to a crustal-scale NE-directed ductile thrust (Basal Thrust) that emplaced the Blueschist over the Basal unit during the exhumation of the Attico-Cycladic Massif. Calcite microstructures reveal that the last stage of deformation occurred at temperatures 200–300 °C achieved by mild heating, which is possibly related with the reburial of the Basal Thrust's footwall. Vorticity analyses were based on the degree of asymmetry of calcite c-axis fabrics as well as on the assumption that the orientation of the long axes of calcite neoblasts within an oblique foliation delineates the direction of instantaneous stretching axis. Both methodological approaches provide consistent estimates with a simple shear component between 55% and 82% (Wn = 0.76–0.96). The use of the stress axis (σ1) orientation recorded by twin-c-axis-pairs to quantify vorticity generally gives significantly lower simple shear component. Comparison of our vorticity estimates with previous estimates inferred from quartz fabrics and rigid porphyroclasts reveals that exhumation-related deformation in the nappe pile was steady state.  相似文献   

20.
吴林波  曾佐勋  高曦  王杰 《现代地质》2012,26(2):294-307
鄂东南铁山是全球第二个梯形石香肠构造的发现点。以该区成层分布、形态相近的梯形石香肠构造为研究对象,利用惯量椭圆法对其基质层进行有限应变测量,获得真应变差、岩层厚度比、运动学涡度分布等。结合梯形石香肠几何形态学、岩石学特征,对所得数据综合分析研究表明:剪切带中垂直剪切方向的厚度比值与其所受真应变差趋于负相关;该梯形石香肠构造是由其上、下相邻基质层厚度差异,基质层中总体上的纯剪切,局部相对集中的简单剪切及相对富集于张裂隙处角岩层中的热液流体等综合作用形成的;发育成层分布且形态相近的梯形石香肠构造所需特征性条件是能干层上、下相邻基质层厚度相差较大,且受总体上持续的平行层面拉伸、垂直层面压缩的纯剪切与局部的简单剪切共同作用。该类石香肠构造是较好的岩石流变学标志。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号