首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 30 毫秒
1.
The paper presents a constitutive model for simulating the high strain‐rate behavior of sands. Based on the concepts of critical‐state soil mechanics, the bounding surface plasticity theory and the overstress theory of viscoplasticity, the constitutive model simulates the high strain‐rate behavior of sands under uniaxial, triaxial and multi‐axial loading conditions. The model parameters are determined for Ottawa and Fontainebleau sands, and the performance of the model under extreme transient loading conditions is demonstrated through simulations of split Hopkinson pressure bar tests up to a strain rate of 2000/s. The constitutive model is implemented in a finite‐element analysis software Abaqus to analyze underground tunnels in sandy soil subjected to internal blast loads. Parametric studies are conducted to examine the effect of relative density and type of sand and of the depth of tunnel on the variation of stresses and deformations in the soil adjacent to the tunnels. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

2.
Analytical solutions are presented for linear finite‐strain one‐dimensional consolidation of initially unconsolidated soil layers with surcharge loading for both one‐ and two‐way drainage. These solutions complement earlier solutions for initially unconsolidated soil layers without surcharge and initially normally consolidated soil layers with surcharge. Small‐strain solutions for the consolidation of initially unconsolidated soil layers with surcharge loading are also presented, and the relationship between the earlier solutions for initially unconsolidated soil without surcharge and the corresponding small‐strain solutions, which was not addressed in the earlier work, is clarified. The new solutions for initially unconsolidated soil with surcharge loading can be applied to the analysis of low stress consolidation tests and to the partial validation of numerical solutions of non‐linear finite‐strain consolidation. They also clarify a formerly perplexing aspect of finite‐strain solution charts first noted in numerical solutions. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

3.
This paper suggests a new method for obtaining steady‐state solutions for ‘full‐flow’ penetrometers. The method is based on the numerical solution of the small strain plastic‐flow problem (i.e. rigid plastic material) with an inhomogeneous strength field, which is determined by converting changes of material properties over time in a stationary frame of reference into spatial distribution of strength in a moving frame of reference. Rather than building streamlines from back integration of soil element distortion, as previous methods have suggested, the method treats the domain as continuous with the associated field equations. The method employs an upstream weighting technique for the determination of information flow within the domain. The execution order for the calculation is based on topological ordering. This results in the calculation having a complexity of O(N), as compared with O(N1.5) for the strain path or streamline methods (N is the number of discretized points), which significantly reduces the calculation time. The formulation is presented for the cylindrical (T‐bar) penetrometer, and includes aspects of soil strength degradation, strain rate effects, strength anisotropy, and interface strength law. Comparison to previously published values, based on large displacement finite element simulations with remeshing, showed good agreement, indicating on the correctness of the suggested approach. Investigation into the soil rigid‐body rotation and the remolding effect on anisotropy characteristics showed an interesting behavior, where the decrease of strength anisotropy due to remolding has a greater influence when the soil strength is higher in the vertical direction. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

4.
Analytical solutions for the steady‐state response of an infinite beam resting on a visco‐elastic foundation and subjected to a concentrated load moving with a constant velocity are developed in this paper. The beam responses investigated are deflection, bending moment, shear force and contact pressure. The mechanical resistance of the foundation is modeled using two parameters ks and ts — ks accounts for soil resistance due to compressive strains in the soil and ts accounts for the resistance due to shear strains. Since this model represents the ground behavior more accurately than the Winkler spring model, the developed solutions produce beam responses that are closer to reality than those obtained using the existing solutions for Winkler model. The dynamic beam responses depend on the damping present in the system and on the velocity of the moving load. Based on the study, dynamic amplification curves are developed for beam deflection. Such amplification curves for deflection, bending moment, shear force and contact pressure can be developed for any beam‐foundation system and can be used in design. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

5.
In order to study the ongoing tectonic deformation in the Rhine Graben area, we reconstruct the local crustal velocity and the strain rate field from GPS array solutions. Following the aim of this work, we compile the velocities of permanent GPS stations belonging to various networks (EUREF, AGNES, REGAL and RGP) in central western Europe. Moreover, the strain rate field is displayed in terms of principal axes and values, while the normal and the shear components of the strain tensor are calculated perpendicular and parallel to the strike of major faults. The results are compared with the fault plane solutions of earthquakes, which have occurred in this area. A broad-scale kinematic deformation model across the Rhine Graben is provided on the basis of tectonics and velocity results of the GPS permanent stations. The area of study is divided into four rigid blocks, between which there might be relative motions. The velocity and the strain rate fields are reconstructed along their borders, by estimating a uniform rotation for each block. The tectonic behaviour is well represented by the four-block model in the Rhine Graben area, while a more detailed model will be needed for a better reconstruction of the strain field in the Alpine region.
Magdala TesauroEmail:
  相似文献   

6.
The paper presents analytical solutions for the evolution of excess pore pressures in the vicinity of a shear band in a rate‐dependent, strain‐softening permeable soil, with the aim to explore, both qualitatively and quantitatively, the potential variation of failure shear stress in the shear band. The solutions encompass both dissipation of a pre‐existing pore pressure regime within the main soil domain, and the effects of generation of additional pore pressure within the shear band itself. The simplified analytical solutions were checked by numerical inversion of exact solutions in Laplace transform space, confirming their high accuracy. The solutions show that it is possible for the failure shear stress to rise initially because of short‐term dissipation of the pre‐existing excess pore pressure at a faster rate than generation of new excess pore pressure within the shear band. This apparent strain hardening in a strain‐softening soil can be misleading in that it can temporarily slow down the sliding mass and create a false sense of stabilization of the slope. It can also result in additional temporary shear resistance for sliding foundations or pipelines on the seabed. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

7.
This paper deals with the unloading problem of a spherical or circular opening excavated in elastic‐perfectly plastic media with a nonassociated Mohr–Coulomb yield criterion. A large strain similarity solution, using incremental velocity approach, is presented by replacing partial differential equations from stress equilibrium, constitutive law, consistency condition, and displacement equation with first‐order ordinary differential equations. The classical Runge–Kutta method is used to solve the first‐order ordinary differential equations. Comparisons among small and large strain solutions are made using some data sets of soil and rock. The results show that the displacements by large strain similarity solution are smaller than those by exact small strain solution and somewhat larger than those by large strain solution using total strain approach. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

8.
Most analytical or semi‐analytical solutions of the problem of load‐settlement response of axially loaded piles are based on the assumption of zero radial displacement. These solutions also are only applicable to piles embedded in either a homogeneous or a Gibson soil deposit. In reality, soil deposits consist of multiple soil layers with different properties, and displacements in the radial direction within the soil deposit are not zero when the pile is loaded axially. In this paper, we present a load‐settlement analysis applicable to a pile with circular cross section installed in multilayered elastic soil that accounts for both vertical and radial soil displacements. The analysis follows from the solution of the differential equations governing the displacements of the pile–soil system obtained using variational principles. The input parameters needed for the analysis are the pile geometry and the elastic constants of the soil and pile. We compare the results from the present analysis with those of an analytical solution that considers only vertical soil displacements. The analysis presented in this paper also provides useful insights into the displacement and strain fields around axially loaded piles. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

9.
A general decomposition approach for the static method of limit analysis is proposed. It is based on piecewise linear stress fields, on a partition into finite element sub‐problems and on a specific coordination of the subproblem stress fields through auxiliary interface problems. The final convex optimization problems are solved using nonlinear interior point programming methods. As validated for the compressed bar with Tresca/von Mises materials in plane strain, this method appears rapidly convergent, so that very large problems with millions of constraints and variables can be solved. Then the method is applied to the classical problem of the stability of a Tresca vertical cut: the static bound to the stability factor is improved to 3.7752, a value to be compared with the recent best upper bound 3.7776. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

10.
The Strain Path Method (SPM) is an approximate framework for simulating the disturbance caused by piles or penetrometers in soil. The key conceptual assumption of the SPM is that the deformation and strain fields caused during these penetration processes are strongly kinematically constrained (especially during undrained penetration of clays) and can be estimated independently from the actual constitutive properties of the surrounding soil. Previous applications of SPM have estimated strain fields for a variety of penetrometer geometries using velocity fields of ideal inviscid fluids. This paper refines the strain field for penetrometers with 60° conical tips using numerically computed velocity fields in viscous fluids with a variety of boundary conditions imposed on the penetrometer shaft. Following a parametric study, a set of flow conditions is selected which provides a best fit between computed soil deformations and physical displacement measurements made in three separate experiments. The approach is simple and rapid and, while highlighting some of the inaccuracies associated with the existing SPM solution, may also be used for comparative purposes to assist the development of other approaches to the deep penetration problem. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

11.
The textural variability of river bed gravels at bar scales is poorly understood, as are the relations between variability at this scale and at reach and river scales. Surface and subsurface grain‐size distributions were therefore examined at reach, bar and bedform scales along lower Fraser River, British Columbia, Canada. Grain‐size variations within compound bars are conditioned by longitudinal position, elevation and morphological setting. Surface and subsurface sediments tend to decrease in median size from bar head to bar tail by 33% and 17%, respectively. Sediment size is constrained at some upper limit that is inversely related to bar surface elevation and which is consistent with competence considerations. The surface sediments on unit bars are finer and better sorted than the bed materials in bar‐top channels and along the main bar edges. Secondary unit bars tend to have a lower sand content than other features, a consequence of sediment resorting. Individual unit bars and gravel sheets exhibit streamwise grain‐size fining and lee‐side sand deposition. Over time, significant amounts of cut and fill do not ipso facto cause changes in surface grain sizes; yet, sediment characteristics can change without any significant morphological adjustment taking place. At the reach scale there is a clear downstream fining trend, but local variability is consistently high due to within‐bar variations. The surface median grain‐size range on individual bars is, on average, 25% of that along the entire 50 km reach but is 68% on one bar. While the overall fining trend yields a downstream change in surface median size of 0·76 mm km?1, the average value for ‘head‐to‐tail’ size reduction on individual bars is 6·3 mm km?1, an order of magnitude difference that highlights the effectiveness of bar‐scale sorting processes in gravel‐bed rivers. Possibilities for modelling bar‐scale variability and the interaction of the different controls that are identified are discussed.  相似文献   

12.
A mesh-free based limit analysis approach is proposed, to determine the upper bound solutions for the collapse loads associated with cohesive soils, under plane strain conditions. In the presented technique, the geometry of problem is just simulated by nodes and there is no need of mesh in the traditional sense. The process of finding an upper bound solution consists of combining limit analysis theory and a mesh-free numerical technique as a discretisation tool. To satisfy the required conditions for the admissibility of the discretised velocity field at the entire problem domain, a strain rate smoothing technique has been adopted. The outcome of proposed combination is a nonlinear optimisation problem which is solved by a direct iterative technique. The solution found by an iterative algorithm is an upper bound for limit load of the stability problem. The efficiency of the proposed method is demonstrated by solving different example problems in the soil mechanics engineering field, at the end of the paper.  相似文献   

13.
Since development of cavity expansion theory and strain path method, almost all the conventional analyses of pile penetration problem have been based on circular cross section penetrometer. However, noncylindrical pile (with noncircular cross section) is also required in geotechnical engineering such as rectangular cross‐sectional pile, X‐sectional cast‐in‐place concrete pile, H‐shaped steel pile, prefabricated vertical drains, and flat dilatometer. This paper presents a novel and general analytical approach for capturing the soil deformation mechanism around the pile with arbitrary cross section. The penetration problem is simulated by a new 2‐dimensional (radial and circumferential) cavity expansion model. Based on the theoretical framework of strain path method, the kinematics (velocity field) of the noncylindrical cavity expansion is reduced to solve the Laplace equation with arbitrary velocity boundary conditions by using the conformal mapping technique. Then, solutions for the strain and displacement, which could consider the large deformation effect, are obtained by the integration of the strain rate and velocity along the streamline. The analytical solution is validated by comparing the degenerate solution of this study with conventional circular (cylindrical) cavity expansion theory. Subsequently, typical numerical examples for the deformation mechanism of elliptical and rectangular cavity expansion are presented to prove the advantage of the proposed new solution particularly in capturing the noncylindrical symmetric displacement field. A brief application of the proposed new analytical solution to the interpretation of the smear effect of prefabricated vertical drain installation confirms its useful in geotechnical engineering.  相似文献   

14.
An analytical solution is developed in this paper to investigate the dynamic response of a large‐diameter end‐bearing pipe pile subjected to torsional loading in viscoelastic saturated soil. The wave propagation in saturated soil and pile are simulated by Biot's two‐phased linear theory and one‐dimensional elastic theory, respectively. The dynamic equilibrium equations of the outer soil, inner soil, and pile are established. The solutions for the outer and inner soils in frequency domain are obtained by Laplace transform technique and the separation of variables method. Then, the dynamic response of the pile is obtained on the basis of the perfect contacts between the pile and the outer soil as well as the inner soil. The results in this paper are compared with that of a solid pile in elastic saturated soil to verify the validity of the solution. Furthermore, the solution in this paper is compared with the classic plane strain solution to verify the solution further and check the accuracy of the plane strain solution. Numerical results are presented to analyze the vibration characteristics and illustrate the effect of the soil parameters and the geometry size of the pile on the complex impedance and velocity admittance of the pile head. Finally, the displacement of the soil at different depth and frequency is analyzed. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

15.
黄传志 《岩土力学》2007,28(10):2127-2132
对屈服条件与屈服函数的极值条件进行了讨论,在不需要流动法则的情况下建立了速度方程。平衡方程、屈服条件与屈服函数的极值条件、速度方程就是土体极限分析的基本方程。这样,对荷载、速度边界条件（包括荷载与速度边界同时存在）,均构成了完备的极限平衡问题。对边坡稳定问题的上、下限定理给出了严密的证明,并建立了求解极限平衡问题的广义极限平衡法,均质土的计算结果表明,圆弧滑动面的广义极限平衡法与对数螺旋面的上限解法基本一致。  相似文献   

16.
Previous work on three‐dimensional shakedown analysis of cohesive‐frictional materials under moving surface loads has been entirely for isotropic materials. As a result, the effects of anisotropy, both elastic and plastic, of soil and pavement materials are ignored. This paper will, for the first time, develop three‐dimensional shakedown solutions to allow for the variation of elastic and plastic material properties with direction. Melan's lower‐bound shakedown theorem is used to derive shakedown solutions. In particular, a generalised, anisotropic Mohr–Coulomb yield criterion and cross‐anisotropic elastic stress fields are utilised to develop anisotropic shakedown solutions. It is found that shakedown solutions for anisotropic materials are dominated by Young's modulus ratio for the cases of subsurface failure and by shear modulus ratio for the cases of surface failure. Plastic anisotropy is mainly controlled by material cohesion ratio, the rise of which increases the shakedown limit until a maximum value is reached. The anisotropic shakedown limit varies with frictional coefficient, and the peak value may not occur for the case of normal loading only. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

17.
A numerical model, called CCRS1, is presented for one‐dimensional large strain consolidation under constant rate of strain loading conditions. The algorithm accounts for vertical strain, general constitutive relationships, relative velocity of fluid and solid phases, changing compressibility and hydraulic conductivity during consolidation, and an externally applied hydraulic gradient acting across the specimen. Soil compressibility is rate independent, and as such, the current model is most appropriate for less‐structured clays. Verification checks show excellent agreement with analytical and numerical solutions for small and large strain conditions. A series of numeric examples indicates that compressibility and hydraulic conductivity constitutive relationships can have an important effect on constant rate of strain consolidation response. Results also indicate that analytical solutions obtained using small strain theory can be in significant error for large strain conditions with changing coefficient of consolidation. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

18.
This paper discusses the excess pore‐air and pore‐water pressure dissipations and the average degree of consolidation in the 2D plane strain consolidation of an unsaturated soil stratum using eigenfunction expansion and Laplace transformation techniques. In this study, the application of a constant external loading on a soil surface is assumed to immediately generate uniformly or linearly distributed initial excess pore pressures. The general solutions consisting of eigenfunctions and eigenvalues are first proposed. The Laplace transform is then applied to convert the time variable t in partial differential equations into the Laplace complex argument s. Once the domain is obtained, a simplified set of equations with variable s can be achieved. The final analytical solutions can be computed by taking a Laplace inverse. The proposed equations predict the two‐dimensional consolidation behaviour of an unsaturated soil stratum capturing the uniformly and linearly distributed initial excess pore pressures. This study investigates the effects of isotropic and anisotropic permeability conditions on variations of excess pore pressures and the average degree of consolidation. Additionally, isochrones of excess pore pressures along vertical and horizontal directions are presented. It is found that the initial distribution of pore pressures, varying with depth, results in considerable effects on the pore‐water pressure dissipation rate whilst it has insignificant effects on the excess pore‐air pressure dissipation rate. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

19.
单粒组密砂剪切带的直剪试验离散元数值分析   总被引：7，自引：1，他引：6  
为分析砂土的剪切力学特性,采用离散元商业软件PFC2D对单粒组密砂在直剪试验中出现的剪切带进行了数值分析。改进传统的分条带观察方式,采用矩形格分割法观察试样内部不同区域的变形特性。对离散元商业软件进行了二次开发,实现了大小主应力及其应力主方向角的可视化,分析了试样内部的应力偏转情况。同时,以纯转动率和颗粒速度等微观变量为中心,观察了试样内部颗粒的运动状态,解析了直剪试验中砂土剪切带形成的微观机制。研究表明,直剪试验中应变局部化区域集中在剪切面附近的一个条带内。通过转动场和速度场的分析可知,剪切带宽度约为10～15倍的砂土平均粒径,带内颗粒转动明显,带边缘出现大的速度和转动变化梯度。对组构和接触力分布的分析可知,剪切过程中粒间接触点和接触力的主轴方向发生了相一致的偏转,偏转后的主轴方向为60°左右。  相似文献   

20.
The concurrent multiscale method, which couples the discrete element method (DEM) for predicting the local micro‐scale evolution of the soil particle skeleton with the finite element method (FEM) for estimating the remaining macro‐scale continuum deformation, is a versatile tool for modeling the failure process of soil masses. This paper presents the separate edge coupling method, which is degenerated from the generalized bridging domain method and is good at eliminating spurious reflections that are induced by coupling models of different scales, to capture the granular behavior in the domain of interest and to coarsen the mesh to save computational cost in the remaining domain. Cundall non‐viscous damping was used as numerical damping to dissipate the kinetic energy for simulating static failure problems. The proposed coupled DEM–FEM scheme was adopted to model the wave propagation in a 1D steel bar, a soil slope because of the effect of a shallow foundation and a plane‐strain cone penetration test (CPT). The numerical results show that the separate edge coupling method is effective when it is adopted for a problem with Cundall non‐viscous damping; it qualitatively reproduces the failure process of the soil masses and is consistent with the full micro‐scale discrete element model. Stress discontinuity is found in the coupling domain. Copyright © 2017 John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号