共查询到20条相似文献，搜索用时 26 毫秒
1.
Arc–continent collision is a key process of continental growth through accretion of newly grown magmatic arc crust to older continental margin. We present 2D petrological–thermo-mechanical models of arc–continent collision and investigate geodynamic regimes of this process. The model includes spontaneous slab bending, dehydration of subducted crust, aqueous fluid transport, partial melting of the crustal and mantle rocks and magmatic crustal growth stemming from melt extraction processes. Results point to two end-member types of subsequent arc–continent collisional orogens: (I) orogens with remnants of accretion prism, detached fragments of the overriding plate and magmatic rocks formed from molten subducted sediments; and (II) orogens mainly consisting of the closed back-arc basin suture, detached fragments of the overriding plate with leftovers of the accretion prism and quasi insignificant amount of sediment-derived magmatic rocks. Transitional orogens between these two endmembers include both the suture of the collapsed back-arc basin and variable amounts of magmatic production. The orogenic variability mainly reflects the age of the subducting oceanic plate. Older, therefore colder and denser oceanic plates trigger subduction retreat, which in turn triggers necking of the overriding plate and opening of a backarc basin in which new oceanic lithosphere is formed from voluminous decompression melting of the rising hot asthenosphere. In this case, subducted sediments are not heated enough to melt and generate magmatic plumes. On the other hand, young and less dense slabs do not retreat, which hampers opening of a backarc basin in the overriding plate while subducted sediments may reach their melting temperature and develop trans-lithospheric plumes. We have also investigated the influences of convergence rate and volcanic/plutonic rocks' ratio in newly forming lithosphere. The predicted gross-scale orogenic structures find similarities with some natural orogens, in particular with deeply eroded orogens such as the Variscides in the Bohemian Massif. 相似文献
2.
Subduction erosion, which occurs at all convergent plate boundaries associated with magmatic arcs formed on crystalline forearc basement, is an important process for chemical recycling, responsible globally for the transport of ~1.7 Armstrong Units (1 AU = 1 km3/yr) of continental crust back into the mantle. Along the central Andean convergent plate margin, where there is very little terrigenous sediment being supplied to the trench as a result of the arid conditions, the occurrence of mantle-derived olivine basalts with distinctive crustal isotopic characteristics (87Sr/86Sr ≥ 0.7050; εNd ≤ −2; εHf ≤ +2) correlates spatially and/or temporally with regions and/or episodes of high rates of subduction erosion, and a strong case can be made for the formation of these basalts to be due to incorporation into the subarc mantle wedge of tectonically eroded and subducted forearc continental crust. In other convergent plate boundary magmatic arcs, such as the South Sandwich and Aleutian Islands intra-oceanic arcs and the Central American and Trans-Mexican continental margin volcanic arcs, similar correlations have been demonstrated between regions and/or episodes of relatively rapid subduction erosion and the genesis of mafic arc magmas containing enhanced proportions of tectonically eroded and subducted crustal components that are chemically distinct from pelagic and/or terrigenous trench sediments. It has also been suggested that larger amounts of melts derived from tectonically eroded and subducted continental crust, rising as diapirs of buoyant low density subduction mélanges, react with mantle peridotite to form pyroxenite metasomatites that than melt to form andesites. The process of subduction erosion and mantle source region contamination with crustal components, which is supported by both isotopic and U-Pb zircon age data implying a fast and efficient connectivity between subduction inputs and magmatic outputs, is a powerful alternative to intra-crustal assimilation in the generation of andesites, and it negates the need for large amounts of mafic cumulates to form within and then be delaminated from the lower crust, as required by the basalt-input model of continental crustal growth. However, overall, some significant amount of subducted crust and sediment is neither underplated below the forearc wedge nor incorporated into convergent plate boundary arc magmas, but instead transported deeper into the mantle where it plays a role in the formation of isotopically enriched mantle reservoirs. To ignore or underestimate the significance of the recycling of tectonically eroded and subducted continental crust in the genesis of convergent plate boundary arc magmas, including andesites, and for the evolution of both the continental crust and mantle, is to be on the wrong side of history in the understanding of these topics. 相似文献
3.
Contributions of Slab Fluid, Mantle Wedge and Crust to the Origin of Quaternary Lavas in the NE Japan Arc 总被引：8，自引：1，他引：8
Quaternary lavas from the NE Japan arc show geochemical evidenceof mixing between mantle-derived basalts and crustal melts atthe magmatic front, whereas significant crustal signals arenot detected in the rear-arc lavas. The along-arc chemical variationsin lavas from the magmatic front are attributable almost entirelyto geochemical variations in the crustal melts that were mixedwith a common mantle-derived basalt. The mantle-derived basaltshave slightly enriched Sr–Pb and depleted Nd isotopiccompositions relative to the rear-arc lavas, but the variationis less pronounced if crustal contributions are eliminated.Therefore, the source mantle compositions and slab-derived fluxesare relatively uniform, both across and along the arc. Despitethis, incompatible element concentrations are significantlyhigher in the rear-arc basalts. We examine an open-system, fluid-fluxedmelting model, assuming that depleted mid-ocean ridge basalt(MORB)-source mantle melted by the addition of fluids derivedfrom subducted oceanic crust (MORB) and sediment (SED) hybridsat mixing proportions of 7% and 3% SED in the frontal- and rear-arcsources, respectively. The results reproduce the chemical variationsfound across the NE Japan arc with the conditions: 0·2%fluid flux with degree of melting F = 3% at 2 GPa in the garnetperidotite field for the rear arc, and 0·7% fluid fluxwith F = 20% at 1 GPa in the spinel peridotite field beneaththe magmatic front. The chemical process operating in the mantlewedge requires: (1) various SED–MORB hybrid slab fluidsources; (2) variable amounts of fluid; (3) a common depletedmantle source; (4) different melting parameters to explain across-arcchemical variations. KEY WORDS: arc magma; crustal melt; depleted mantle; NE Japan; Quaternary; slab fluid 相似文献
4.
大陆弧岩浆幕式作用与地壳加厚:以藏南冈底斯弧为例 总被引：1，自引：0，他引：1
大陆弧岩浆带位于汇聚板块的前缘,记录了洋陆俯冲过程和大陆地壳生长过程,是研究壳幔相互作用的天然实验室。越来越多的研究发现,大陆弧岩浆的生长与侵位并不是均一的、连续的过程,而是呈现阶段性、峰期性特征,即幕式岩浆作用。弧岩浆峰期与岩浆平静期相比,岩浆增生速率显著增强,易于发生岩浆聚集,继而形成大的岩基,如北美西部科迪勒拉造山带内华达岩基、半岛岩基等。藏南冈底斯岩浆带位于拉萨地体南缘,属于印度-亚洲碰撞带的上盘,其南侧与喜马拉雅地体以雅鲁藏布蛇绿岩带为界。冈底斯弧岩浆形成时代集中在240~50 Ma期间,其形成与演化与新特提斯洋壳岩石圈板片俯冲到拉萨地体之下密切相关。因此,对冈底斯弧型岩浆作用的研究,将很好地揭示大陆型弧岩浆的演化过程,继而反演洋-陆俯冲过程,以及壳幔相互作用过程。通过对冈底斯岩浆带岩浆岩锆石U-Pb及Lu-Hf同位素,以及弧前和前陆盆地碎屑锆石U-Pb和Lu-Hf同位素的收集和整理,结合已经发表的区域地质资料的总结,我们发现冈底斯弧型岩浆演化具有如下特点:1幕式侵位,岩浆峰期为100~80 Ma和65~40 Ma,中间为岩浆平静期;2峰期阶段岩浆聚集,形成巨大岩基;岩石同位素非常亏损,预示着地幔物质的显著参与;3在弧岩浆的峰期阶段,冈底斯地壳厚度有显著增加,说明弧岩浆的峰期侵位对地壳加厚有重大贡献。 相似文献
5.
Role of the subducted slab,mantle wedge and continental crust in the generation of adakites from the Andean Austral Volcanic Zone 总被引：78，自引：2，他引：78
All six Holocene volcanic centers of the Andean Austral Volcanic Zone (AVZ; 49–54°S) have erupted exclusively adakitic andesites
and dacites characterized by low Yb and Y concentrations and high Sr/Y ratios, suggesting a source with residual garnet, amphibole
and pyroxene, but little or no olivine and plagioclase. Melting of mafic lower crust may be the source for adakites in some
arcs, but such a source is inconsistent with the high Mg# of AVZ adakites. Also, the AVZ occurs in a region of relatively
thin crust (<35 km) within which plagioclase rather than garnet is stable. The source for AVZ adakites is more likely to be
subducted oceanic basalt, recrystallized to garnet-amphibolite or eclogite. Geothermal models indicate that partial melting
of the subducted oceanic crust is probable below the Austral Andes due to the slow subduction rate (2 cm/year) and the young
age (<24 Ma) of the subducted oceanic lithosphere. Geochemical models for AVZ adakites are also consistent with a large material
contribution from subducted oceanic crust (35–90% slab-derived mass), including sediment (up to 4% sediment-derived mass,
representing approximately 15% of all sediment subducted). Variable isotopic and trace-element ratios observed for AVZ adakites,
which span the range reported for adakites world-wide, require multistage models involving melting of different proportions
of subducted basalt and sediment, as well as an important material contribution from both the overlying mantle wedge (10–50%
mass contribution) and continental crust (0–30% mass contribution). Andesites from Cook Island volcano, located in the southernmost
AVZ (54°S) where subduction is more oblique, have MORB-like Sr, Nd, Pb and O isotopic composition and trace-element ratios.
These can be modeled by small degrees (2–4%) of partial melting of eclogitic MORB, yielding a tonalitic parent (intermediate
SiO2, CaO/Na2O>1), followed by limited interaction of this melt with the overlying mantle (≥90% MORB melt, ≤10% mantle), but only very
little (≤1%) or no participation of either subducted sediment or crust. In contrast, models for the magmatic evolution of
Burney (52°S), Reclus (51°S) and northernmost AVZ (49–50°S) andesites and dacites require melting of a mixture of MORB and
subducted sediment, followed by interaction of this melt not only with the overlying mantle, but the crust as well. Crustal
assimilation and fractional crystallization (AFC) processes and the mass contribution from the crust become more significant
northwards in the AVZ as the angle of convergence becomes more orthogonal.
Received: 1 March 1995 / Accepted: 13 September 1995 相似文献
6.
大陆地壳的起源、生长和改造一直都是国际地学界广泛关注的热点问题,目前仍存在一定的争议,特别体现在陆壳增生的方式和速率上.为了探讨大陆地壳的生长方式,简要综述了俯冲带及其岩浆作用和大陆地壳生长的研究成果.俯冲带可划分为洋洋俯冲带、洋陆俯冲带和陆陆俯冲带,其岩浆作用以产出弧岩浆岩为主要特征,被广泛接受为大陆地壳生长的主要方式.目前主要有两种陆壳生长的假说:玄武岩模式和安山岩模式.玄武岩模式主要通过拆沉和底垫过程来实现新生地壳向大陆地壳的演化;安山岩模式则强调陆壳直接形成于产出安山质岩浆的俯冲带岩浆弧环境.俯冲带和碰撞带等板块汇聚边界是显生宙大陆地壳生长和改造的主要位置,俯冲带岩浆作用对陆壳生长发挥着重要的作用. 相似文献
7.
Crustal Growth by Magmatic Accretion Constrained by Metamorphic P-T Paths and Thermal Models of the Kohistan Arc, NW Himalayas 总被引：2，自引：0，他引：2
Magmatic accretion is potentially an important mechanism inthe growth of the continental crust and the formation of granulites.In this study, the thermal evolution of a magmatic arc in responseto magmatic accretion is modeled using numerical solutions ofthe one-dimensional heat conduction equation. The initial andboundary conditions used in the model are constrained by geologicalobservations made in the Kohistan area, NW Himalayas. Takingconsideration of the preferred intrusion locations for basalticmagmas, we consider two plausible modes of magmatic accretion:the first involves the repeated intrusion of basalt at mid-crustaldepths (‘intraplate model’), and the second evaluatesthe simultaneous intrusion of basalt and picrite at mid-crustaldepths and the base of the crust respectively (‘double-platemodel’). The results of the double-plate model accountfor both the inferred metamorphic P–T paths of the Kohistanmafic granulites and the continental geotherm determined frompeak P–T conditions observed for granulite terranes. Thedouble-plate model may be applicable as a key growth processfor the production of thick mafic lower crust in magmatic arcs. KEY WORDS: thermal model; magmatic underplating; P–T path; granulite; lower crust 相似文献
8.
华南板块发育有巨量新元古代岩浆岩，因而是研究罗迪尼亚（Rodinia）超大陆演化期间华南板块地幔属性、地壳演化和壳幔相互作用最理想的场所。虽然在扬子西缘新元古代镁铁质和酸性岩浆作用方面已有大量的研究，但是在系统研究中酸性花岗岩类所代表的不同深部动力学意义的方面还较为薄弱。文章基于团队近期对于扬子板块西缘新元古代典型花岗岩类的研究成果，系统揭示不同深度层次的岩浆作用。最新研究支持扬子西缘新元古代受控于俯冲构造背景，除发生俯冲流体和板片熔体交代地幔作用外，最新识别的ca.850~835 Ma高Mg#闪长岩指示俯冲沉积物熔体也参与了地幔交代作用。Ca.840~835 Ma过铝质花岗岩的发现说明扬子西缘新元古代时期不仅存在新生镁铁质下地壳的熔融，也发生了俯冲背景下成熟大陆地壳物质的重熔。Ca.780 Ma Ⅰ型花岗闪长岩-花岗岩组合揭示了俯冲阶段后期板片回撤断离后软流圈地幔瞬时上涌引发的不同地壳层次的岩浆响应。从ca.800 Ma的增厚下地壳来源的埃达克质花岗岩到ca.750 Ma的酸性地壳来源的A型花岗岩的出现，表明扬子西缘新元古代时期经历了俯冲有关的地壳增厚到俯冲后期弧后扩张背景下的区域性地壳减薄。 相似文献
9.
在大陆碰撞造山带中寻找消失的古洋壳再循环及其壳幔相互作用的证据,对理解从洋壳俯冲到陆壳俯冲化学地球动力学过程的转变,以及板块构造理论的发展具有重要意义.通过对桐柏-红安造山带晚古生代和晚中生代镁铁质岩浆岩的岩石地球化学特征进行总结,可以识别出俯冲古洋壳再循环的岩石学和地球化学记录.晚古生代岛弧型镁铁质岩石具有弧型微量元素特征和相对亏损的放射成因同位素组成,记录了俯冲古洋壳在弧下深度（80~160 km）的流体交代作用;而晚中生代洋岛型镁铁质岩石OIB型微量元素特征和亏损-弱富集的放射成因同位素组成,记录了俯冲古洋壳在弧后深度（>200 km）的熔体交代作用.这一定性的解释也进一步得到了定量计算的证实,其结果表明镁铁质岩浆岩中的不相容元素的含量以及放射性成因同位素的富集程度,主要受控于地幔源区中所加入的地壳组分的性质和比例.因此,碰撞造山带中的岛弧型和洋岛型镁铁质岩浆岩,分别记录了弧下和弧后深度的俯冲古洋壳物质再循环. 相似文献
10.
Renjie Zhao Quanshu Yan Haitao Zhang Yili Guan Zhenmin Ge Long Yuan Shishuai Yan 《地球科学进展》1986,35(8):789-803
Subducted sediments play an important role in crust-mantle interaction and deep mantle processes, especially for subduction zone magmatism and mantle geochemistry. The current rate of Global Subducting Sediments (GLOSS) is 0.5~0.7 km3/a. The GLOSS are composed of terrigenous material(76 wt.%), calcium carbonate(7 wt.%), opal(10 wt.%) and mineral-bound H2O+(7 wt.%). The chemical compositions of GLOSS are similar to those of upper continental crust which is mainly controlled by the terrigenous materials, and yet the materials formed by marine processes will dilute the terrigenous materials. The components of subducted sediments are different among trenches. In the accretionary margin, the components of subducted sediments are similar to those of the upper crust, while in the non-accretionary margin the components are terrigenous materials plus those produced by marine processes. During subduction, subducted sediments will released fluids, melt or supercritical fluid to affect island arc/back-arc basin magmatism by means of aqueous fluid or sediment melt. In addition, a part of subducted sediments, together with underlying altered oceanic crust/lithosphere, recycle into the mantle and contribute to the mantle heterogeneity. Geochemical tracers indicate that subducted sediments play variable contributions to the magmatic processes in different tectonic setting. Thus, subducted sediments play an important role in two relatively independent dynamics systems (plate tectonics and mantle plume), as well as related mantle evolution models. As a result, by accurately calculating the compositions of subduction sediments and using various geochemical indicators, we can further limit the input and output fluxes of various elements or isotopes, and then obtain more accurately residual subducted components, which can provide us some important clues for geodynamic process. 相似文献
11.
《China Geology》2021,4(1):32-43
When and how the Tibetan Plateau formed and maintained its thick crust and high elevation on Earth is continuing debated. Specifically, the coupling relationship between crustal thickening and corresponding paleoelevation changing has not been well studied. The dominant factors in crustal thickness changing are crustal shortening, magmatic input and surface erosion rates. Crustal thickness change and corresponding paleoelevation variation with time were further linked by an isostatic equation in this study. Since 120 Ma crustal shortening, magmatic input and surface erosion rates data from the central Tibetan Plateau are took as input parameters. By using a one-dimensional isostasy model, the authors captured the first-order relationship between crustal thickening and historical elevation responses over the central Tibetan Plateau, including the Qiangtang and Lhasa terranes. Based on the modeling results, the authors primarily concluded that the Qiangtang terrane crust gradually thickened to ca. 63 km at ca. 40 Ma, mainly due to tectonic shortening and minor magmatic input combined with a slow erosion rate. However, the Lhasa terrane crust thickened by a combination of tectonic shortening, extensive magmatic input and probably Indian plate underthrusting, which thickened the Lhasa crust over 75 km since 25 Ma. Moreover, a long-standing elevation >4000 m was strongly coupled with a thickened crust since about 35 Ma in the central Tibetan Plateau.©2021 China Geology Editorial Office. 相似文献
12.
A catalytic delamination-driven model for coupled genesis of Archaean crust and sub-continental lithospheric mantle 总被引：10，自引：0，他引：10
Jean H. Bédard 《Geochimica et cosmochimica acta》2006,70(5):1188-1214
There is no consensus on the processes responsible for near-coeval formation of Archaean continental crust (dominantly tonalite-trondhjemite-granodiorite: TTG), greenstone belts dominated by komatiitic to tholeiitic lavas (KT), and sub-continental lithospheric mantle (SCLM). The Douglas Harbour domain (2.7-2.9 Ga) of the Minto Block, northeastern Superior Province, has two TTG suites, the western and eastern Faribault-Thury (WFT and EFT), with embedded KT greenstones. Tonalites of both suites have high light/heavy rare-earth element ratios (L/HREE), high large ion lithophile element (U-Th-Rb-Cs-La: LILE) contents, positive Sr-Pb anomalies, and negative Nb-Ta-Ti anomalies. Such typical Archaean TTG signatures are commonly explained by melting of subducted oceanic crust, but could also originate by melting the base of thick basaltic plateaux formed above mantle upwellings (plumes), leaving behind restites containing pyroxene, garnet, and rutile. Field relationships (in situ segregation veins), phase equilibria (hornblende stabilized at lower crustal pressure), petrography (corroded epidote and muscovite phenocrysts, rare plagioclase phenocrysts), and trace element models, all imply that FT tonalite to trondhjemite evolution reflects hornblende-dominated fractional crystallization, not partial melting of subducted crust. The geochemistry of parental FT tonalites can be modeled by 15-30% melting of FT tholeiitic metabasalts, with residues of eclogite, garnet-websterite, or hornblende-garnet websterite. A minor residual Ti-phase such as rutile is also needed to generate negative Ti-Nb-Ta troughs in the TTGs. However, large volumes of eclogitic restites complementary to TTG are not observed either at the base of Archaean crustal sections, or in the SCLM. Additional problems with slab-melting models include: (a) the rarity of lithologies and associations characteristic of active margins (ophiolites, andesites, blueschists, accretionary mélanges, molasse, flysch, high-pressure belts, and thrust-and-fold belts); (b) the need to deliver plume-derived KT melt through the slab; and (c) extracting enough TTG melt from a subducting slab in the time available (200-300 my). In the plateau-melting model, heat for crustal anatexis is supplied by ongoing KT magma derived from mantle upwellings. However, SCLM rocks differ from predicted 1-stage mantle melting residua; and the voluminous residual eclogites complementary to TTG generation somehow need to be removed. These two problems might solve one another if the dense crustal restites disaggregated and mixed into the underlying depleted mantle. Mantle melting slows upon exhaustion of Ca-Al-rich phases, with large temperature increases needed to extract more melt from harzburgite residua. Physical addition of delaminated crustal restites would refertilize the refractory mantle, allowing extraction of additional melt increments, and might explain the ultra-depleted and orthopyroxene-rich nature of the SCLM. A hybrid source composed of 10% eclogitic restite of EFT tonalite generation, mixed with harzburgitic residues from 25% melting of primitive mantle, yields model melts with trace element signatures resembling typical Munro komatiites. Variations in the mineralogy and geochemistry of the delaminated component might account for the diversity of komatiite types. Degassing of hornblende-rich delaminated restites would transfer LILE to surrounding depleted mantle and could generate boninites. Fusion of undepleted metabasalt sandwiched among denser restites could generate sanukitoids. Mantle melt pulses generated by catastrophic delamination events would underplate nascent TTG crust and trigger renewed crustal melting, followed by delamination of newly formed eclogitic restites, triggering additional mantle melting, and so on. I posit that delamination of crustal restites catalyzed multi-stage melting of the SCLM and maturation of the Archaean continental crust. Thus, Archaean crust and SCLM are genetically inter-linked, and both form above major mantle upwellings. 相似文献
13.
岩浆岩中的熔体包裹体 总被引：15，自引：1，他引：15
熔体包裹体是岩浆岩矿物生长过程中捕获的天然岩浆珠滴 ,它们有效地保存了大量有关其主矿物形成时周围岩浆介质的物理化学信息 ,所以它们是其主矿物结晶演化史的忠实记录员 ,它们能够提供岩浆系统成分和演化的重要信息。文中对熔体包裹体研究的若干基本原理进行了讨论 ,它们涉及 :(1)熔体包裹体的一般特征 ;(2 )熔体包裹体封闭过程中和封闭后的演化 ;(3)熔体包裹体的均一化研究 ;(4 )熔体包裹体化学成分和挥发组分研究。熔体包裹体研究可以对岩浆岩石学中的一些重要问题进行更为深入的探索 :(1)重建天然岩浆结晶演化的热历史 ;(2 )提供有关岩浆沿下降液相线的成分数据 ;(3)查明天然岩浆结晶演化过程中化学成分的变迁规律 ;(4 )解决岩浆岩石学中的一些疑难问题 ,如岩浆不混溶作用、岩浆混合作用、岩浆混染作用、岩浆中硫的性状、地幔部分熔融和地幔交代作用等方面的问题。将熔体包裹体数据和常规的岩石学、地球化学和实验岩石学信息综合一体 ,可以提高我们模拟岩浆作用过程的能力。熔体包裹体研究已经成为现代岩浆岩石学的一个独立的分支 ,其前景十分广阔。 相似文献
14.
《Gondwana Research》2014,25(2):494-508
Large segments of the continental crust are known to have formed through the amalgamation of oceanic plateaus and continental fragments. However, mechanisms responsible for terrane accretion remain poorly understood. We have therefore analysed the interactions of oceanic plateaus with the leading edge of the continental margin using a thermomechanical–petrological model of an oceanic-continental subduction zone with spontaneously moving plates. This model includes partial melting of crustal and mantle lithologies and accounts for complex rheological behaviour including viscous creep and plastic yielding. Our results indicate that oceanic plateaus may either be lost by subduction or accreted onto continental margins. Complete subduction of oceanic plateaus is common in models with old (> 40 Ma) oceanic lithosphere whereas models with younger lithosphere often result in terrane accretion. Three distinct modes of terrane accretion were identified depending on the rheological structure of the lower crust and oceanic cooling age: frontal plateau accretion, basal plateau accretion and underplating plateaus.Complete plateau subduction is associated with a sharp uplift of the forearc region and the formation of a basin further landward, followed by topographic relaxation. All crustal material is lost by subduction and crustal growth is solely attributed to partial melting of the mantle.Frontal plateau accretion leads to crustal thickening and the formation of thrust and fold belts, since oceanic plateaus are docked onto the continental margin. Strong deformation leads to slab break off, which eventually terminates subduction, shortly after the collisional stage has been reached. Crustal parts that have been sheared off during detachment melt at depth and modify the composition of the overlying continental crust.Basal plateau accretion scrapes oceanic plateaus off the downgoing slab, enabling the outward migration of the subduction zone. New incoming oceanic crust underthrusts the fractured terrane and forms a new subduction zone behind the accreted terrane. Subsequently, hot asthenosphere rises into the newly formed subduction zone and allows for extensive partial melting of crustal rocks, located at the slab interface, and only minor parts of the former oceanic plateau remain unmodified.Oceanic plateaus may also underplate the continental crust after being subducted to mantle depth. (U)HP terranes are formed with peak metamorphic temperatures of 400–700 °C prior to slab break off and subsequent exhumation. Rapid and coherent exhumation through the mantle along the former subduction zone at rates comparable to plate tectonic velocities is followed by somewhat slower rates at crustal levels, accompanied by crustal flow, structural reworking and syndeformational partial melting. Exhumation of these large crustal volumes leads to a sharp surface uplift. 相似文献
15.
埃达克质岩的构造背景与岩石组合 总被引：6，自引：1，他引：5
本文介绍了埃达克质岩形成的构造背景与岩石组合。埃达克质岩可以形成于不同的构造背景并与不同类型的岩石同时出现：1）火山弧环境中常出现埃达克质岩一高镁安山岩-富Nb玄武质岩组合,它的形成可能与板片熔融以及熔体一地幔橄榄岩的相互作用有关;2）大陆活动碰撞造山带环境（如羌塘）中埃达克质岩常与同期钾质或橄榄玄粗质岩共生,这可能与俯冲陆壳熔融和俯冲陆壳熔体交代的地幔橄榄岩熔融有关;3）造山带伸展垮塌环境（如大别山）中埃达克质岩会伴随有镁铁质一超镁铁质岩浆出露,增厚下地壳产生埃达克质岩浆后的榴辉岩质残留体拆沉进入地幔,与地幔橄榄岩的混合可能形成后期镁铁质一超镁铁质岩浆的源区;4）大陆板内伸展环境中埃达克质岩常与同期橄榄玄粗质的岩石共生,增厚、拆沉下地壳,以及富集地幔的熔融或岩浆混合在岩石的成因中发挥了重要作用。 相似文献
16.
A series of 2D petrological–thermomechanical numerical experiments was conducted to: (i) characterize the variability of exhumation mechanisms of ultrahigh pressure metamorphic (UHPM) rocks during collision of spontaneously moving plates and (ii) study the possible geodynamic effects of melting at ultrahigh pressure conditions for the exhumation of high‐temperature–ultrahigh pressure metamorphic (HT–UHPM) rocks. To this end, the models include fluid‐ and melt‐induced weakening of rocks. Five distinct modes of exhumation of (U)HPM rocks associated with changes in several parameters in the models of plate collision and continent subduction are identified as follows: vertical crustal extrusion, large‐scale crustal stacking, shallow crustal delamination, trans‐lithospheric diapirism, and channel flow. The variation in exhumation mechanisms for (U)HPM rocks in numerical models of collision driven by spontaneously moving plates contrasts with the domination of the channel flow mode of exhumation in a majority of the published results from numerical models of collision that used a prescribed plate convergence velocity and/or did not include fluid‐ and melt‐induced weakening of rocks. This difference in the range of exhumation mechanisms suggests that the prescribed convergence velocity condition and the neglect of fluid‐ and melt‐related weakening effects in the earlier models may inhibit development of several important collisional processes found in our experiments, such as slab breakoff, vertical crustal extrusion, large‐scale stacking, shallow crustal delamination and relamination, and eduction of the continental plate. Consequently, the significance of channel flow for the exhumation of UHPM rocks may have been overstated based on the results of the earlier numerical experiments. In addition, the results from this study extend over a larger proportion of the high‐temperature range of P–T conditions documented from UHPM rocks, including those retrieved from HT–UHPM rocks, than the results of experiments from previous numerical models. In particular, the highest peak metamorphic temperatures (up to 1000 °C) are recorded in the case of the vertical crustal extrusion model in which subducted continental crust is subjected to a period of prolonged heating by asthenospheric mantle abutting the continental side of the vertically hanging slab. Nonetheless, some extreme temperature conditions which have been suggested for the Kokchetav and Bohemian massifs, perhaps up to 1100–1200 °C, are still to be achieved in experiments using numerical models. 相似文献
17.
Abstract Along the Periadriatic Lineament in the Alps and the Sava-Vardar Zone of the Dinarides and Hellenides, Paleogene magmatic associations form a continuous belt, about 1700 km long. The following magmatic associations occur: (1) Eocene granitoids; (2) Oligocene granitoids including tonalites; (3) Oligocene shoshonite and calc-alkaline volcanics with lamprophyres; (4) Egerian-Eggenburgian (Chattian) calc-alkaline volcanics and granitoids. All of these magmatic associations are constrained by radiometric ages, which indicate that the magmatic activity was mainly restricted to the time span between 55 and 29 Ma. These igneous rocks form, both at surface and in the subsurface, the distinct linear Periadriatic-Sava-Vardar magmatic belt, with three strikes that are controlled by the indentation of Apulia and Moesia and accompanying strike-slip faulting. The geology, seismicity, seismic tomography and magnetic anomalies within this belt suggest that it has been generated in the African-Eurasian suture zone. Based on published analytical data, the petrology, major and trace element contents and Sr, Nd and O isotopie composition of each magmatic association are briefly defined. These data show that Eocene and Oligocene magmatic associations of the Late Paleogene Periadriatic-Sava-Vardar magmatic belt originated along a consuming plate margin. Based on isotopie systems, two main rock groups can be distinguished: (1) 87Sr/86Sr = 0.7036–0.7080 and δ18O = 5.9–7.2‰, indicating basaltic partial melts derived from a continental mantle-lithosphere, and (2) 87Sr/86Sr = 0.7090–72131 and δ18O = 7.3–11.5‰, indicating crustal assimilation and melting. The mantle sources for the primary basalt melts are metasomatized garnet peridotites and/or spinel lherzolites and phlogopite lherzolites of upper mantle wedge origin. The geodynamic evolution of the plutonic and volcanic associations of the Periadriatic-Sava-Vardar magmatic belt was related to the Africa-Eurasia suture zone that was dominated by break-off of the subducted lithospheric slab of Mesozoic oceanic crust, at depths of 90–100 km. This is indicated by their contemporaneity along the 1700 km long belt. © 2002 Éditions scientifiques et médicales Elsevier SAS. All rights reserved. 相似文献
18.
稀有气体同位素对岩浆侵入方向的制约:以夏日哈木镍铜硫化物矿床为例 总被引：1，自引：0，他引：1
我国东昆仑造山带新发现的夏日哈木镍铜硫化物矿床是造山带环境产出全球镍资源最大的岩浆镍铜矿床。含矿岩体不同类型岩石中橄榄石和辉石的He、Ne和Ar同位素组成表明:~3He/~4He(0.39~0.03Ra)和~(40)Ar/~(36)Ar比值(292.0~316.9)较低,~(20)Ne/~(22)Ne和~(21)Ne/~(22)Ne沿放射性成因Ne及大陆地壳线分布,表明岩浆起源演化过程中有大陆地壳组分和大气饱和流体在橄榄石结晶前加入。He和Ar同位素混合模型计算表明岩浆中有7.8%再循环洋壳组分和87.7%大气饱和流体的加入,再循环洋壳可能带入了大气及地壳组分。~3He/~4He和~(40)Ar/~(36)Ar比值的自西向东系统性降低,以及微量元素、成矿元素和稀有气体同位素的空间协同变化特征表明地壳物质的逐步加入,即岩浆可能自西向东方向侵入,侵位过程中地壳流体的加入促使硫饱和及硫化物的熔离成矿。 相似文献
19.
为探讨水流体活动对板块俯冲隧道过程及大陆碰撞造山的制约作用,采用热力学和动力学耦合的数值模拟方法,建立了系统的数值模型.结果显示俯冲隧道内的混杂岩存在两种不同的折返路径:（1）平行于俯冲隧道斜向上折返,形成靠近缝合带的高压-超高压变质岩;（2）近垂直穿过上覆地幔楔侵入地壳深度.这两种差异性的模式主要受控于俯冲带热结构.俯冲带的温度结构控制俯冲隧道内水流体和熔体活动,从而影响上覆地幔楔的弱化程度,最终导致俯冲带内物质的不同运移过程和折返路径.同时,大陆俯冲碰撞带的岩石圈变形和拆沉作用均与俯冲带的流体-熔体活动所导致的岩石圈弱化息息相关.数值模拟结果极大促进了对于板块俯冲带流体-熔体活动及其动力学过程的理解. 相似文献