首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The northern part of the Dead Sea Fault Zone is one of the major active neotectonic structures of Turkey. The main trace of the fault zone (called Hacıpaşa fault) is mapped in detail in Turkey on the basis of morphological and geological evidence such as offset creeks, fault surfaces, shutter ridges and linear escarpments. Three trenches were opened on the investigated part of the fault zone. Trench studies provided evidence for 3 historical earthquakes and comparing trench data with historical earthquake records showed that these earthquakes occurred in 859 AD, 1408 and 1872. Field evidence, palaeoseismological studies and historical earthquake records indicate that the Hacıpaşa fault takes the significant amount of slip in the northern part of the Dead Sea Fault Zone in Turkey. On the basis of palaeoseismological evidence, it is suggested that the recurrence interval for surface faulting event is 506 ± 42 years on the Hacıpaşa fault.  相似文献   

2.
Recent seismicity in and around the Gargano Promontory, an uplifted portion of the Southern Adriatic Foreland domain, indicates active E–W strike-slip faulting in a region that has also been struck by large historical earthquakes, particularly along the Mattinata Fault. Seismic profiles published in the past two decades show that the pattern of tectonic deformation along the E–W-trending segment of the Gondola Fault Zone, the offshore counterpart of the Mattinata Fault, is strikingly similar to that observed onshore during the Eocene–Pliocene interval. Based on the lack of instrumental seismicity in the south Adriatic offshore, however, and on standard seismic reflection data showing an undisturbed Quaternary succession above the Gondola Fault Zone, this fault zone has been interpreted as essentially inactive since the Pliocene. Nevertheless, many investigators emphasised the genetic relationships and physical continuity between the Mattinata Fault, a positively active tectonic feature, and the Gondola Fault Zone. The seismotectonic potential of the system formed by these two faults has never been investigated in detail. Recent investigations of Quaternary sedimentary successions on the Adriatic shelf, by means of very high-resolution seismic–stratigraphic data, have led to the identification of fold growth and fault propagation in Middle–Upper Pleistocene and Holocene units. The inferred pattern of gentle folding and shallow faulting indicates that sediments deposited during the past ca. 450 ka were recurrently deformed along the E–W branch of the Gondola Fault Zone.We performed a detailed reconstruction and kinematic interpretation of the most recent deformation observed along the Gondola Fault Zone and interpret it in the broader context of the seismotectonic setting of the Southern Apennines-foreland region. We hypothesise that the entire 180 km-long Molise–Gondola Shear Zone is presently active and speculate that also its offshore portion, the Gondola Fault Zone, has a seismogenic behaviour.  相似文献   

3.
We present a series of high-resolution seismic reflection lines across the Yizre'el valley, which is the largest active depression in Israel, off the main trend of the Dead Sea rift. The new seismic reflection data is of excellent quality and shows that the valley is dissected into numerous small blocks, separated by active faults. The Yizre'el valley is found to consist of a series of half grabens, rather than a single half graben, or a symmetrical graben. The faults are generally vertical and appear to have a dominant strike-slip component, but some dip-slip is also evident. A marked zone of compression near Megido is associated with the intersection of the two largest faults in the valley, the Carmel fault and the Gideon fault. Variable trend of the faults reflects the complexity of the local geology along the boundary between the wide NW–SE trending Farah–Carmel fault zone and the E–W trending basins and ranges in the Lower Galilee. This tectonic complexity is likely to result from a highly variable stress pattern, modified by the structures inside it. Normal faulting in the valley occurred at an early stage of its development as a tectonic depression. However, strike-slip motion on the Carmel fault, and possibly also on some of the other faults, appears to have started together with the onset of normal faulting. Earthquake hazard in the area appears to be uniform as faults are distributed throughout the Yizre'el valley.  相似文献   

4.
In the recent structure of the Baikal Rift Zone, the Kichera Fault serves as the northwestern boundary of the Angara-Kichera aggradation depression. A seismotectonic scarp 60 m high was formed as a result of normal faulting during the late Pleistocene and Holocene. The erosion-aggradation and seismic landforms testify to the nonuniform growth of this scarp. To study the character of the seismic activity in the Kichera Fault Zone, we excavated two trenches across the seismotectonic scarp. The Holocene stage of the seismotectonic activation within the fault zone and the preceding period of relative quiescence were outlined from the character of the deformations in the trench sections and previous geomorphic investigations. According to our preliminary estimations, the active stage that started at the end of the late Pleistocene and that has remained incomplete until now was accompanied by at least three rupture-forming earthquakes.  相似文献   

5.
The Betic-Rif Cordilleras, formed by the interaction of NW–SE convergence between the Eurasian and African plates and the westward motion of their Internal Zones, provide a good example of an active tectonic arc. The Campo de Dalías and Campo de Níjar constitute outcropping sectors of Neogene and Quaternary rocks located in the southeastern border of the Betic Cordilleras and allow us to study the recent deformations developed in the internal border of this tectonic arc.The main active faults with related seismicity, representing a moderate seismic hazard, associated to the southeastern Betic Cordilleras boundary, include high-angle NW–SE-oriented normal faults that affect, at least, the upper part of the crust, a main detachment located at 10 km depth, and probably another detachment at 20 km as well. Seismite structures, recent fault scarps with associated colluvial wedges that deform the drainage network and the alignment of the coastline, indicate that the high-angle faults have been active at least since the Quaternary.Paleostresses determined from microfault analysis in Quaternary deposits generally show an ENE–WSW trend of extension. Present-day earthquake focal mechanisms include normal, strike-slip and reverse faulting. Normal and strike-slip focal mechanisms generally indicate ENE–WSW extension, and strike-slip and reverse focal mechanisms are related to NNW–SSE compression.The maximum horizontal compression has a consistently NNW–SSE trend. The deep activity of detachments and reverse faults determines the NNW–SSE crustal shortening related to the Eurasian–African plate convergence. At surface, however, the predominance of normal faults is probably produced by the increase in the relative weight of the vertical stress axis, which in turn may be related to relief uplift and subsequent horizontal spreading. The internal mountain front boundary of the Betic Cordilleras developed through the activity of a set of structures that is more complex than a typical external mountain front, probably as a consequence of a vertical variable stress field that acted on previously deformed rocks belonging to the Internal Zone of the cordilleras.  相似文献   

6.
河套断陷带大青山山前断裂晚第四纪古地震完整性研究   总被引：11，自引：0，他引：11  
冉勇康  张培震  陈立春 《地学前缘》2003,10(Z1):207-216
通过沿大青山山前断裂 18个探槽的古地震分析 ,分别确定了 5个段落的 2 2次古地震事件。呼和浩特段 ,距今约 1.9万a以来 7次 ,平均重复间隔时间 (2 4 6 2± 4 13)a ;毕克齐段距今 2 .2万a以来 4次 ;土左旗西段距今 1.1万a以来 4次 ,平均重复间隔时间 (2 94 8± 5 6 0 )a ;土右旗西段距今约 1.1万a以来 5次 ,平均重复间隔时间 (2 2 89± 36 0 )a ;包头段距今 2 .3万a以来 2次。由断层位移量限定法和多探槽校验法判定 ,大青山山前断裂已揭露的古地震事件还不完全代表晚第四纪全断裂的大地震活动历史。只有在呼和浩特段 1.9万a以来、土左旗西段和土右旗西段约 1.1万a以来活动历史基本完整。其它两个段落不完整。这是用这些古地震资料评价该断裂未来地震危险性 ,以及今后进一步工作时应注意的问题。  相似文献   

7.
The Pajarito fault forms the western margin of the Rio Grande rift in north-central New Mexico, and lies adjacent to Los Alamos National Laboratory, a major Federal research facility. Vertical displacement on this normal fault over the past 1.2 Ma has created a 50- to 120-m-high fault scarp on Bandelier Tuff (1.2 Ma), yielding a long-term average slip rate of ca. 0.1 mm/yr. In support of a Laboratory-wide seismic hazards assessment, we excavated 14 trenches in the Pajarito fault zone to determine the age of the most recent displacement event, the recurrence interval between events, the displacement per event, and the variability in slip rate and recurrence through time. The large number of trenches was required by the large height of the fault scarp and the complexity of the fault zone. Only about half the trenches contained significant thicknesses of Holocene deposits, but in those trenches there was clear evidence for an early-to-mid-Holocene displacement event. The previous event was at least 20–40 ka, and the average recurrence interval over the past ca. 300 ka was about 20–40 kyr. We infer that much of the structural relief across this fault developed soon after eruption of the Bandelier Tuff between 1.0 and 1.2 Ma, and that slip rate slowed considerably after that time.  相似文献   

8.
Investigation of active faults is crucial for the seismic hazard assessment and, in the case of volcanic belts, it provides a deeper understanding of the interactions between volcanism and tectonic faulting. In this study, we report the results of the first paleoseismological and tephrochronological investigation undertaken on Holocene faulting in Kamchatka's volcanic belts. The studied trenches and additional excavations are located along the axial fault zone of the Eastern Volcanic Front, where the earlier dated tephra layers provide a robust age control of the faulting events. Electron microprobe analysis of glass from 22 tephra samples permitted correlations among the disparate tephra profiles for constructing a summary tephra sequence. The latter, together with published geochronological data, allowed the construction of a Bayesian age model. Detailed examination of the tephra layers deformed by faulting allowed us to reconstruct and date six faulting events with the offsets of 1 to 20 cm indicating paleoearthquakes with magnitudes of Mw < 5.4. Holocene crustal seismicity of the Eastern Volcanic Front manifests temporal clustering rather than a uniform flux of events. However, no correlation between dated seismic events and the largest Holocene eruptions of proximal volcanoes was observed.  相似文献   

9.
The Ericiyes Basin is a trans‐tensional basin situated 20 km north of the regional Ecemi? Fault Zone. Recently it has been hypothesized that faulting within the Erciyes Basin links with the Ecemi? Fault Zone further south as part of a regional Central Anatolian Fault Zone. New 40Ar/39Ar dating of volcanic and volcaniclastic rocks adjacent to faults, both along the margins and in the centre of the Erciyes Basin, constrains the timing of basin inception and later faulting. Extensional faulting occurred along the eastern and western margins of the basin during the Early Messinian (latest Miocene). Sinistral and minor normal faulting were active along the axis of the basin during the early Pleistocene. These fault timings are similar to those inferred for the Ecemi? Fault Zone further south, and support the hypothesis that faulting within the Erciyes Basin and the Ecemi? Fault Zone are indeed linked.  相似文献   

10.
Bora Uzel 《Geodinamica Acta》2016,28(4):311-327
Linking of normal faults forms at all scales as a relay ramp during growth stages and represents the most efficient way for faults to lengthen during their progressive formation. Here, I study the linking of normal faulting along the active K?rka?aç Fault Zone within the west Anatolian extensional system to reconstruct fault interaction in time and space using both field- and computer-based data. I find that (i) connecting of the relay zone/ramp occurred with two breaching faults of different generations and that (ii) the propagation was facilitated by the presence of pre-existing structures, inherited from the ?zmir-Bal?kesir transfer zone. Hence, the linkage cannot be compared directly to a simple fault growth model. Therefore, I propose a combined scenario of both hangingwall and footwall fault propagation mechanisms that explain the present-day geometry of the composite fault line. The computer-based analyses show that the approximate slip rate is 0.38 mm/year during the Quaternary, and a NE–SW-directed extension is mainly responsible for the recent faulting along the K?rka?aç Fault Zone. The proposed structural scenario also highlights the active fault termination and should be considered in future seismic hazard assessments for the region that includes densely populated settlements.  相似文献   

11.
Derek Rust   《Tectonophysics》2005,408(1-4):193
Transpressional tectonics are typically associated with restraining bends on major active strike-slip faults, resulting in uplift and steep terrain. This produces dynamic erosional and depositional conditions and difficulties for established lines of palaeoseismological investigation. Consequently, in these areas data are lacking to determine tectonic behaviour and future hazard potential along these important fault segments. The Big Bend of the San Andreas fault in the Transverse Ranges of southern California exemplifies these problems. However, landslides, probably seismically triggered, are widespread in the rugged terrain of the Big Bend. Fluvial reworking of these deposits rapidly produces geomorphic planes and lines that are markers for subsequent fault slip. The most useful are offset and abandoned stream channels, for these are relatively high precision markers for identifying individual faulting events. Palaeoseismological studies from the central Big Bend, involving 14C ages of charcoal fragments from trench exposures, illustrate these points and indicate that the past three faulting events, including the great 1857 earthquake, were relatively similar in scale, each producing offsets of about 7–7.5 m. The mean recurrence interval is 140–220 years. The pre-1857 event here may be the 1812 event documented south of the Big Bend or an event which took place probably between 1630 and 1690. Ground breakage in both events extended south of the Big Bend, unlike the 1857 event where rupture was skewed to the north. The preceding faulting event ruptured both to the north and south of the Big Bend and probably occurred between 1465 and 1495. All these events centred on the Big Bend and may be typical for this fault segment, suggesting that models of uniform long-term slip rates may not be applicable to the south-central San Andreas. A slip-rate estimate of 34–51 mm a− 1 for the central Big Bend, although uncertain, may also imply higher slip in the Big Bend and highlights difficulties in correlating slip-rates between sites with different tectonic settings. Slip rates on the San Andreas may increase within the broad compressional tectonics zone of the Big Bend, compared to the north and south where the plate boundary is a relatively linear and sub-parallel series of dominantly strike-slip faults. Partitioning slip within the Big Bend is inherently uncertain and insufficient suitably comparable data are available to sustain a uniform slip model, although such models are a common working assumption.  相似文献   

12.
We studied a sequence of small earthquakes that occurred during the months of April and May of 1997, in Jalisco, southwestern Mexico. The earthquakes were located along a set of active faults that form the Zacoalco half-graben (La Lima fault system), west of Lake Chapala, within the rift–rift–rift triple junction. A total of 33 events were located, with magnitudes ranging from 1.5 to 3.5, recorded by a portable array of broadband seismographs. We identified two groups of events: one corresponding to a shallow normal fault, synthetic to La Lima fault system, and another group associated with a deeper fault. The events that occurred on the synthetic fault show normal faulting oriented on a NW–SE plane, dipping shallowly towards the SW. The other group of mechanisms showed either a normal fault oriented NW–SE and dipping steeply to the NE, or a very shallow-dipping normal fault, dipping to the SW. Earthquake distribution and fault plane solutions suggest that the Zacoalco half-graben developed from blocks that rotate as slip occurs on listric faults. These mechanisms could represent the type of motion expected for larger earthquakes in the area, like the one that occurred in 1568.  相似文献   

13.
The 1511 Western Slovenia earthquake (M = 6.9) is the largest event occurred so far in the region of the Alps–Dinarides junction. Though it strongly influences the regional seismic hazard assessment, the epicenter and mechanism are still under debate. The complexity of the active tectonics of the Alps–Dinarides junction is reflected by the presence of both compressional and transpressional deformations. This complexity is witnessed by the recent occurrence of three main earthquake sequences, the 1976 Friuli thrust faulting events, the 1998 Bovec–Krn Mountain and the 2004 Kobarid strike-slip events. The epicenters of the 1998 and 2004 strike-slip earthquakes (Ms = 5.7 and Ms = 4.9, respectively) lie only 50 km far from the 1976 thrust earthquake (Ms = 6.5).We use the available macroseismic data and recent active tectonics studies, to assess a possible epicenter and mechanism for the 1511 earthquake and causative fault. According with previous works reported in the literature, we analyze both a two-and a single-event case, defining several input fault models. We compute synthetic seismograms up to 1 Hz in an extended-source approximation, testing different rupture propagations and applying a uniform seismic moment distribution on the fault segments. We extract the maximum horizontal velocities from the synthetics and we convert them into intensities by means of an empirical relation. A rounded-to-integer misfit between observed and computed intensities is performed, considering both a minimized and a maximized databases, built to avoid the use of half-degree macroseismic intensity data points. Our results are consistent with a 6.9 magnitude single event rupturing 50 km of the Idrija right-lateral strike-slip fault with bilateral rupture propagation.  相似文献   

14.
Dextral transtensional deformation is occurring along the Sierra Nevada–Great Basin boundary zone (SNGBBZ) at the eastern edge of the Sierra Nevada microplate. In the Lake Tahoe region of the SNGBBZ, transtension is partitioned spatially and temporally into domains of north–south striking normal faults and transitional domains with conjugate strike-slip faults. The normal fault domains, which have had large Holocene earthquakes but account only for background seismicity in the historic period, primarily accommodate east–west extension, while the transitional domains, which have had moderate Holocene and historic earthquakes and are currently seismically active, primarily record north–south shortening. Through partitioned slip, the upper crust in this region undergoes overall constrictional strain.Major fault zones within the Lake Tahoe basin include two normal fault zones: the northwest-trending Tahoe–Sierra frontal fault zone (TSFFZ) and the north-trending West Tahoe–Dollar Point fault zone. Most faults in these zones show eastside down displacements. Both of these fault zones show evidence of Holocene earthquakes but are relatively quiet seismically through the historic record. The northeast-trending North Tahoe–Incline Village fault zone is a major normal to sinistral-oblique fault zone. This fault zone shows evidence for large Holocene earthquakes and based on the historic record is seismically active at the microearthquake level. The zone forms the boundary between the Lake Tahoe normal fault domain to the south and the Truckee transition zone to the north.Several lines of evidence, including both geology and historic seismicity, indicate that the seismically active Truckee and Gardnerville transition zones, north and southeast of Lake Tahoe basin, respectively, are undergoing north–south shortening. In addition, the central Carson Range, a major north-trending range block between two large normal fault zones, shows internal fault patterns that suggest the range is undergoing north–south shortening in addition to east–west extension.A model capable of explaining the spatial and temporal partitioning of slip suggests that seismic behavior in the region alternates between two modes, one mode characterized by an east–west minimum principal stress and a north–south maximum principal stress as at present. In this mode, seismicity and small-scale faulting reflecting north–south shortening concentrate in mechanically weak transition zones with primarily strike-slip faulting in relatively small-magnitude events, and domains with major normal faults are relatively quiet. A second mode occurs after sufficient north–south shortening reduces the north–south Shmax in magnitude until it is less than Sv, at which point Sv becomes the maximum principal stress. This second mode is then characterized by large earthquakes on major normal faults in the large normal fault domains, which dominate the overall moment release in the region, producing significant east–west extension.  相似文献   

15.
Sakhalin Island straddles an active plate boundary between the Okhotsk and Eurasian plates. South of Sakhalin, this plate boundary is illuminated by a series of Mw 7–8 earthquakes along the eastern margin of the Sea of Japan. Although this plate boundary is considered to extend onshore along the length of Sakhalin, the location and convergence rate of the plate boundary had been poorly constrained. We mapped north-trending active faults along the western margin of the Poronaysk Lowland in central Sakhalin based on aerial photograph interpretation and field observations. The active faults are located east of and parallel to the Tym–Poronaysk fault, a terrane boundary between Upper Cretaceous and Neogene strata; the active faults appear to have reactivated the terrane boundary at depth in Quaternary time. The total length of the active fault zone on land is about 140 km. Tectonic geomorphic features such as east-facing monoclinal and fault scarps, back-tilted fluvial terraces, and numerous secondary faults suggest that the faults are west-dipping reverse faults. Assuming the most widely developed geomorphic surface in the study area formed during the last glacial maximum at about 20 ka based on similarities of geomorphic features with those in Hokkaido Island, we obtain a vertical component of slip rate of 0.9–1.4 mm/year. Using the fault dip of 30–60°W observed at an outcrop and trench walls, a net slip rate of 1.0–2.8 mm/year is obtained. The upper bound of the estimate is close to a convergence rate across the Tym–Poronaysk fault based on GPS measurements. A trenching study across the fault zone dated the most recent faulting event at 3500–4000 years ago. The net slip associated with this event is estimated at about 4.5 m. Since the last faulting event, a minimum of 3.5 m of strain, close to the strain released during the last event, has accumulated along the central portion of the active strand of the Tym–Poronaysk fault.  相似文献   

16.
The evolution of the seismogenic process associated with the Ms 5.8 Sangro Valley earthquake of May 1984 (Abruzzo, central Italy) is closely controlled by the Quaternary extensional tectonic pattern of the area. This pattern is characterised by normal faults mainly NNW striking, whose length is controlled by pre-existing Mio–Pliocene N100±10° left-lateral strike-slip fault zones. These are partly re-activated as right-lateral normal-oblique faults under the Quaternary extensional regime and behave as transfer faults.Integration of re-located aftershocks, focal mechanisms and structural features are used to explain the divergence between the alignment of aftershocks (WSW–ENE) and the direction of seismogenic fault planes defined by the focal mechanisms (NNW–SSE) of the main shock and of the largest aftershock (Ms=5.3).The faults that appear to be involved in the seismogenic process are the NNW–SSE Barrea fault and the E–W M. Greco fault. There is field evidence of finite Quaternary deformation indicating that the normal Barrea fault re-activates the M. Greco fault as right-lateral transfer fault. No surface faulting was observed during the seismic sequence. The apparently incongruent divergence between aftershocks and nodal planes may be explained by interpreting the M. Greco fault as a barrier to the propagation of earthquake rupturing. The rupture would have nucleated on the Barrea fault, migrating along-strike towards NNW. The sharp variation in direction from the Barrea to the M. Greco fault segments would have represented a structural complexity sufficient to halt the rupture and subsequent concentration of post-seismic deformation as aftershocks around the line of intersection between the two fault planes.Fault complexities, similar to those observed in the Sangro Valley, are common features of the seismic zone of the Apennines. We suggest that the zones of interaction between NW–SE and NNW–SSE Plio-Quaternary faults and nearly E–W transfer faults, extending for several kilometres in the same way as M. Greco does, might act as barriers to the along-strike propagation of rupture processes during normal faulting earthquakes. This might have strong implications on seismic hazard, especially for the extent of the maximum magnitude expected on active faults during single rupture episodes.  相似文献   

17.
On March 10 and September 13, 2007 two earthquakes with moment magnitudes 3.66 and 3.94, respectively, occurred in the eastern part of the United Arab Emirates (UAE). The two events were widely felt in the northern Emirates and Oman and were accompanied by a few aftershocks. Ground motions from these events were well recorded by the broadband stations of Dubai (UAE) and Oman seismological networks and provide an excellent opportunity to study the tectonic process and present day stress field acting in this area. In this study, we report the focal mechanisms of the two main shocks by two methods: first motion polarities and regional waveform moment tensor inversion. Our results indicate nearly pure normal faulting mechanisms with a slight strike slip component. We associated the fault plane trending NNE–SSW with a suggested fault along the extension of the faults bounded Bani Hamid area. The seismicity distribution between two earthquake sequences reveals a noticeable gap that may be a site of a future event. The source parameters (seismic moment, moment magnitude, fault radius, stress drop and displacement across the fault) were also estimated from displacement spectra. The moment magnitudes were very consistent with waveform inversion. The recent deployment of seismic networks in Dubai and Oman reveals tectonic activity in the northern Oman Mountains that was previously unknown. Continued observation and analysis will allow for characterization of seismicity and assessment of seismic hazard in the region.  相似文献   

18.
This paper reviews the research on active and earthquake faults in Taiwan conducted prior and after the 1999 Chichi earthquake. The Chichi earthquake plays as a turning point of the relevant studies, since the 1999 coseismic surface rupture exactly follows preexisting fault scarps, created in turn by previous seismic events along the Chelungpu Fault. This fact indicates that the precise mapping on the other active faults is fundamental to predict the location of surface rupture caused by large future earthquakes. Since 1999, many trenching studies have been carried out along the Chichi earthquake fault. A few of them demonstrates that the penultimate event is as young as probably only 200–430 years old; however, some others show a rather old age of several hundreds years or even older for the last faulting event before 1999. More trenching studies are necessary for such a long fault in order to understand the possible segmentation features and the correlation of the paleoseismic events identified along the entire fault length. In addition, we further discuss the offshore faulting associated with seismic event along the eastern coast of Taiwan, where the multiple Holocene terraces are well known.  相似文献   

19.
We carried out paleoseismological analyses in Norcia, one of the oldest town of central Italy. Four trenches were dug in late Pleistocene–Holocene deposits, across an unmapped, antithetic splay of the Norcia Fault System. The investigated fault runs through the recent settlement of the town, brushing against the middle-age city walls. We found evidence of repeated surface ruptures in the past 20 ky, the last one dated to a period fitting with the 1703 AD, catastrophic earthquake (M = 6.8). Our data (i) show definitively the late Pleistocene–Holocene activity of the Norcia Fault System, (ii) strengthen the historical accounts describing surface ruptures during the 1703 event in Norcia, (iii) cast light on the seismogenic behavior of the 70-km-long fault system between L'Aquila and Norcia (central Italy) and (iv) predict the occurrence of normal surface faulting inside the municipality of Norcia during future M ≥ 6 earthquakes.  相似文献   

20.
We describe and compare the two transform zones that connect the Icelandic rift segments and the mid-Atlantic Ridge close to the Icelandic hot spot, in terms of geometry of faulting and stress fields. The E–W trending South Iceland Seismic Zone is a diffuse shear zone with a Riedel fault pattern including N0°–N20°E trending right-lateral and N60°–N70°E trending left-lateral faults. The dominant stress field in this zone is characterised by NW–SE extension, in general agreement with left-lateral transform motion. The Tjörnes Fracture Zone includes three major lineaments at different stages of development. The most developed, the Húsavík–Flatey Fault, presents a relatively simple geometry with a major fault that trends ESE–WNW. The stress pattern is however complex, with two dominant directions of extension, E–W and NE–SW on average. Both these extensions are compatible with the right-lateral transform motion and reveal different behaviours in terms of coupling. Transform motion has unambiguous fault expression along a mature zone, a situation close to that of the Tjörnes Fracture Zone. In contrast, transform motion along the immature South Iceland Seismic Zone is expressed through a more complicate structural pattern. At the early stage of the transform process, relatively simple stress patterns prevail, with a single dominant stress field, whereas, when the transform zone is mature, moderate and low coupling situations may alternate, as a function of volcanic–tectonic crises and induce changes in stress orientation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号