共查询到20条相似文献，搜索用时 250 毫秒
1.
内源瞬态荷载作用下圆柱形孔洞的动力响应解答是土动力学的经典问题之一。已有研究大都假设孔洞周围土体为理想弹性介质或完全饱和多孔介质。然而,实际工程中不存在完全弹性和完全饱和土体。分别视衬砌结构和周围土体为弹性材料和准饱和多孔介质（饱和度 95%）,根据牛顿第二定律、达西定律和Biot波动理论推导出准饱和土体的控制方程。根据边界条件导出衬砌和土体的位移、应力和孔隙压力的Laplace变换空间的解答。利用反Laplace变换数值计算方法,将解答转换为时域解。分析了饱和度对衬砌位移、应力和孔压的影响,结果表明,当95% 99%时,饱和度对径向位移和切向应力的影响较小;99% 100%时,饱和度对径向位移和切向应力的影响较大;但饱和度对孔隙压力的影响远大于对径向位移和切向应力的影响。得出位移、应力和孔压沿径向的衰减规律,当95% 99%时,饱和度对径向位移和切向应力沿径向衰减影响较小,99% 100%时,饱和度对径向位移和切向应力沿径向衰减影响较大,但饱和度对孔压沿径向的衰减影响远大于对径向位移和切向应力沿径向的衰减。 相似文献
2.
无限元是一种有效的人工边界,可用于处理弹性波的传播问题。在传统动力无限元的基础上,提出了一种采用分向插值技术的新型动力无限元,详细地推导了这种无限元的形函数,建立了完全解析形式的刚度矩阵,以提高计算效率,采用该无限元边界,计算了弹性介质中的线源Lamb问题,通过对比解析解答的地基表面位移,验证了该无限元的有效性。算例分析表明,采用此类无限元时,有限元单元边长建议取不超过1/8剪切波波长,网格边界到激励源点的距离宜取5倍剪切波波长。无限单元中的幅值衰减系数对计算结果影响甚微,建议取较小值。 相似文献
3.
运用复变函数法和保角映射法对无限介质土中的衬砌结构进行分析.通过引入两个势函数将弹性介质的控制方程解耦成两个Helmholtz方程.利用所得势函数的通解,得到无限土介质和衬砌结构的位移和应力的表达式,利用无限介质与衬砌结构之间的连续性条件和衬砌结构内边界上的边界条件,可确定波函数展开式中的末知系数,并给出动应力集中系数的数值结果. 相似文献
4.
This paper considers the transient response of a pressurized long cylindrical cavity in an infinite poroelastic medium. To obtain transient solutions, Biot's equations for poroelastodynamics are specialized for this problem. A set of exact general solutions for radial displacement, stresses, pore pressure and discharge are derived in the Laplace transform space by using analytical techniques. Solutions are presented for three different types of prescribed transient radial pressures acting on the surface of a permeable as well as an impermeable cavity surface. Time domain solutions are obtained by inverting Laplace domain solutions using a reliable numerical scheme. A detailed parametric study is presented to illustrate the influence of poroelastic material parameters and hydraulic boundary conditions on the response of the medium. Comparisons are also presented with the corresponding ideal elastic solutions to portray the poroelastic effects. It is noted that the maximum radial displacement and hoop stress at the cavity surface are substantially higher than the classical static solutions and differ considerably from the transient elastic solutions. Time histories and radial variations of displacement, hoop stress, pore pressure and fluid discharge corresponding to a cavity in two representative poroelastic materials are also presented. 相似文献
5.
将围岩和衬砌分别视作均质、连续的线弹性正交各向异性和各向同性体,并充分考虑衬砌的支护滞后效应和隧洞运行时的内水压力作用,运用复变函数方法中的幂级数解法,提出了正交各向异性岩体中任意形状水工隧洞的力学解析方法。以直墙半圆拱形水工隧洞为例,所获得的解析解可精确满足衬砌内边界的应力边界条件以及围岩与衬砌接触面的应力、位移连续条件,同时还将解析结果与ANSYS数值结果对比分析,吻合良好。利用获得的解析解,讨论了围岩开挖面上不同的各向异性程度、不同的弹性对称面角度以及隧洞内不同的水压荷载对衬砌以及围岩上应力和位移分布的影响。 相似文献
6.
A. P. S. Selvadurai 《国际地质力学数值与分析法杂志》1989,13(2):159-170
The problem of the axial loading of a rigid disk-shaped anchor plate embedded in an isotropic elastic medium of infinite extent is examined. At the boundary of the disk anchor plate the elastic medium contains a cracked region of finite extent. The presence of the cracked region decreases the elastic stiffness of the anchor plate. The mathematical formulation of the problem is developed, and a numerical scheme is presented which can be used to solve the resulting coupled integral equations. The numerical technique is used to evaluate the results, which illustrate the manner in which the elastic stiffness of the anchor plate is influenced by the extent of cracking. Similar results are developed for the flaw shearing mode stress intensity factor at the external boundary of the cracked region. 相似文献
7.
借助于Biot 波动理论和弹性波的传播理论,采用复变函数和多级坐标法,对半空间饱和土中圆形衬砌结构对弹性稳态压缩波的散射问题进行求解和分析。利用一个半径很大的圆弧来逼近半空间直边界,将待解问题转化为稳态弹性压缩波在一个大圆孔和一个弹性衬砌结构的散射问题。通过引入势函数,将饱和土的Biot波动方程和衬砌的弹性波动方程解耦成Helmholtz 方程,借助复变函数级数展开便可以预先写出该组Helmholtz方程的通解。然后,通过引用复变量,把饱和土和衬砌结构中的应力、位移及孔压用设定的势函数表示出来,再利用半空间饱和土和衬砌结构的连续性条件和近似直边界的圆弧边界和衬砌内边界的边界条件求解出该组势函数的特解。最后,利用势函数的特解,得到饱和土中的位移,应力和孔压及衬砌结构的位移和应力;变换不同的参数求解衬砌结构内外边界的动应力和孔压的集中系数,通过对算例结果的分析得出一系列有益的结论。 相似文献
8.
研究了稳态水平剪切（SH）波作用下含有圆柱形孔洞的各向异性弹性半空间的动力响应问题,探讨介质的各向异性对孔附近动应力的影响规律。运用复变函数和多极坐标方法在变换空间中构造出各向异性弹性半空间中圆孔的散射波函数,所构造的散射波函数能够自动满足半空间水平表面上应力自由的边界条件和无穷远处的Sommerfeld辐射条件。根据圆孔表面应力自由的边界条件,采用最小二乘法求解所构造的散射波函数的系数。分析了SH波以不同角度自弹性半空间内入射时,不同介质特性、入射波数和埋深对圆孔附近动应力集中系数的影响。数值结果表明,各向异性弹性半空间中孔附近的动应力比各向同性情况有明显增高。 相似文献
9.
按照波函数展开法和镜像方法,对直角域中半圆形凸起和圆形孔洞对SH波的散射进行了分析,得到其稳态解。对含孔洞和凸起的直角域做分区,等效为一个含孔洞与凹陷的直角域和一个圆域的契合,其在分界面上满足位移和应力的连续性条件,即契合条件,分别构造两个区域内的位移波函数,按照孔洞边界柱面上的应力自由和契合条件定解波函数展开式的系数。按Fourier级数展开法,得到定解条件的线性代数方程组,截断求解,进而得到问题的解析解。数值算例给出圆形孔洞边沿动应力和地表位移幅值的分布情况,得到直角域自由边界、凸起、孔洞对散射和地震动的影响。 相似文献
10.
Influence functions, that permit us to determine stresses and displacements at an arbitrary point in an infinite, homogeneous, linear elastic, anisotropic medium due to different three-dimensional (3-D) stress or displacement discontinuities distributed on infinite, flat, band-type elements, are presented. Any straight-line segment on the band, which is perpendicular to its infinite side, has the same distribution of the discontinuities. Along with the functions, their Taylor series approximations are also provided. The last can be useful to analyse stresses and displacements at points distant from the elements. The functions allow us to avoid procedures of numerical integration in the Indirect Boundary Element Method and/or the Displacement Discontinuity Method computer codes that are able to solve complete plane-strain problems with 3-D boundary conditions for an elastic, anisotropic medium. © 1997 by John Wiley & Sons, Ltd. 相似文献
11.
We present a uniform asymptotic solution (UAS) for a displacement discontinuity (DD) that lies within the middle layer of a three‐layer elastic medium in which relative shear deformation between parallel interfaces is controlled by linear springs. The DD is assumed to be normal to the two interfaces between the elastic media. Using the Fourier transform method we construct a leading term in the asymptotic expansion for the spectral coefficient functions for a DD in a three‐layer‐spring medium. Although a closed‐form solution will require a solution in terms of an infinite series, we demonstrate how this UAS can be used to construct highly efficient and accurate solutions even in the case in which the DD actually touches the interface. We compare the results using the Green's function UAS solution for a crack crossing a soft interface with results obtained using a multi‐layer boundary element method. We also present results from an implementation of the UAS Green's function approach in a pseudo‐3D hydraulic fracturing simulator to analyze the effect of interface shear deformation on the fracture propagation process. These results are compared with field measurements. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
12.
13.
14.
This study presents an exact solution for drained spherical cavity expansion subjected to constant stress and zero displacement boundary conditions in finite medium. The solution is exact as no simplification is involved in the solution procedure in the plastic region and can be solved as an initial value problem. The effect of finite radial extent on the results of cavity expanding to a certain radius is accounted for through the initial values at the elastic-plastic boundary. A critical state constitutive model with a nonassociated flow rule is adopted. The model parameters from literature are then used in generating the results for cavity expansion in infinite and finite radial extent to highlight the difference. Also, the results are presented in a way that can be used to account for the boundary effect for the interpretation of cone penetration tests conducted in calibration chambers. 相似文献
15.
A. P. S. Selvadurai 《国际地质力学数值与分析法杂志》2004,28(2):191-208
This paper examines the problem of the advective transport of a contaminant from sources in the shape of either a penny-shaped crack or an elongated needle-shaped cavity located in a porous medium of infinite extent. The advective transport is induced by Darcy flow in the porous medium, where the internal boundary is maintained at a constant potential. The paper presents an approximate analytical solution to this problem, which is deduced from a formulation that models a cavity in the shape of either an oblate or a prolate spheroid. The results also represent one of the few spatially three-dimensional exact analytical solutions for the, albeit linear, hyperbolic problem governing the contaminant transport problem. The paper also presents a canonical proof of uniqueness for advective contaminant transport problems associated with media of infinite extent. Copyright © 2004 John Wiley & Sons, Ltd. 相似文献
16.
The paper presents a simple approximate analytical solution of the remote stresses that cause the collapse of a borehole or other circular cylindrical cavity in an infinite elastic space. Regions of parallel equidistant splitting cracks are assumed to form on the sides of the cavity. Their boundary is assumed to be an ellipse of a growing horizontal axis, the other axis remaining equal to the borehole diameter. The slabs of rock between the splitting cracks are assumed to buckle as slender columns, and their post-critical stress is considered as the residual stress in the cracked rock. The buckling of these slab columns is assumed to be resisted not only by their elastic bending stiffness but also shear stresses produced on rough crack faces by relative shear displacements. The energy release from the infinite medium caused by the growth of the elliptical cracking region is evaluated according to Eschelby's theorem. This release is set equal to the energy dissipated by the formation of all the splitting cracks, which is calculated under the assumption of constant fracture energy. This yields the collapse stress as a function of the elastic moduli, fracture energy, ratio of the remote principal stresses, crack shear resistance characteristic and borehole diameter. The collapse stress as a function of crack spacing is found to have a minimum, and the correct crack spacing is determined from this minimum. For small enough diameters, the crack spacing increases as the (4/5)-power of the borehole diameter, while for large enough diameters a constant spacing is approached. In contrast to plastic solutions, the breakout stress exhibits a size effect, such that for small enough diameters the breakout stress decreases as the (? 2/5)-power of the borehole diameter, while for large enough diameters a constant limiting value is approached. Finally, some numerical estimates are given and the validity of various simplifying assumptions made is discussed. 相似文献
17.
在以往关于圆柱形衬砌隧道的瞬态动力响应中,衬砌周围土体大多假定为弹性介质或饱和介质。然而,自然界中的土体大多为非饱和介质。考虑土体与衬砌结构的动力相互作用及动荷载引起的附加质量密度的影响,研究了瞬态荷载作用下非饱和土中无限长深埋圆柱形衬砌隧道的动力响应。基于多孔介质混合物理论和连续介质力学理论,建立了非饱和土中圆柱形衬砌隧道受到瞬态荷载作用时衬砌及周围土体的控制方程,利用Durbin数值反演法得到了衬砌及土体在时间域的动力响应。数值分析了饱和度对瞬态荷载下径向位移、径向应力、环向应力和孔隙水压力的影响。结果表明：饱和度对衬砌及周围土体的瞬态响应影响显著;饱和度对径向位移沿径向的衰减影响较小,对环向应力和孔隙压力沿径向的衰减影响较大。 相似文献
18.
M. E. Duncan Fama 《国际地质力学数值与分析法杂志》1989,13(3):331-337
It is shown that a finite element calculation which approximates an ‘infinite medium’; problem by a mesh with finite boundaries will yield greater accuracy when stress boundary conditions are applied on the far-field boundary than is obtainable with displacement boundary conditions. In particular, with Poisson's ratio close to 0.5, the accuracy of the latter model is severely impaired, whereas the stress boundary condition model is unaffected for Poisson's ratio of 0.49 and a reasonable mesh. The eight-node quadratic isoparametric element displays superb accuracy for the axisymmetric thick cylinder with either type of boundary condition. 相似文献
19.
均匀地应力场中球形洞室开挖问题可以简化为空间轴对称问题,为分析和评价球形洞室开挖的稳定性,采用有限差分方法对平衡方程与变形协调方程进行离散,将洞室围岩潜在塑性区划分为一系列的球壳,并考虑岩体的应变软化行为,可以得到满足线性Mohr-Coulomb（H-C）准则和非线性Hoek-Brown（H-B）屈服准则的围岩体塑性区范围及相应的应力与变形分布。计算结果表明,随着离散步的增加,数值解逐渐收敛,文中解与已有文献的结果完全吻合,且计算效率更高。对一组强度参数遵循CWFS（黏聚力弱化与摩擦角强化）规律的围岩体内塑性区范围、变形与应力的分布进行了分析,并与常规的应变软化模型的计算结果进行了对比,CWFS模型的结果更合理一些。 相似文献
20.
Theoretical formulations to the problem of expansion of spherical and cylindrical cavities in a layered elastic system are presented. The medium surrounding the cavity is assumed to consist of several layers, and each is idealized as a linear elastic solid. The solutions are expressed in matrix forms and can be obtained using a programmable calculator. The developed solutions are of some importance in geomechanics. The spherical cavity solution can be used to compute the settlement of single axially loaded piles. The predicted settlement using the analysis outlined herein agrees reasonably well with one case of field measurements. The cylindrical cavity solution can be used to manifest the effect of disturbed mass at the cavity wall on the stress–strain and deformation characteristics of the intact mass. 相似文献