首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 546 毫秒
1.
New palaeoseismic trenching across the main splay of the Fucino fault system provides evidence for a High Middle Age surface‐faulting episode conceivably associated with a disruptive earthquake, similar to the one that occurred in 1915 (Mw 7.0). The existence of this event, which has already been suggested by some previous studies, implies a shortening of the recurrence interval for Mw 7.0 earthquakes with respect to current knowledge. If we assume that the palaeoseismic Holocene record is complete, this shortening is focused in the historical period, when the Fucino structure sourced three strong earthquakes in only 1.4 ka. A similar clustering of energy release in the recent past is consistent with both palaeoseismological studies on other faults affecting the Apennine divide, and the high GPS strain rates observed in the same chain sectors.  相似文献   

2.
Characterising youthful strike-slip fault systems within transtensional regimes is often complicated by the presence of tectonic geomorphic features produced by normal faulting associated with oblique extension. The Petersen Mountain fault in the northern Walker Lane tectonic province exhibits evidence of both normal and strike-slip faulting. We present the results of geologic and geomorphic mapping, and palaeoseismic trenching that characterise the fault's style and sense of deformation. The fault consists of two major traces. The western trace displaces colluvial, landslide, and middle to late Pleistocene alluvial fans and is associated with aligned range front saddles, linear drainages, and oversteepened range front slopes. The eastern trace is associated with a low linear bedrock ridge, a narrow graben, right deflected stream channels, and scarps in late Pleistocene alluvial fan deposits. A trench on the eastern trace of the fault exposed a clear juxtaposition of disintegrated granodiorite bedrock against sand and boulder alluvial fan deposits across a steeply east-dipping fault. The stratigraphic evidence supports the occurrence of at least one late Pleistocene earthquake with a component of lateral displacement. As such, the Petersen Mountain fault accommodates part of the ~7 mm/yr of dextral shear distributed across the northern Walker Lane.  相似文献   

3.
The East Anatolian Fault Zone (EAFZ) is among the most important active continental transform fault zones in the world as testified by major historical and minor instrumental seismicity. The first paleoseismological exploratory trenching study on the EAFZ was done on the Palu–Lake Hazar segment (PLHS), which is one of the six segments forming the fault zone, in order to determine its past activity and to assess its earthquake hazard.The results of trenching indicate that the latest surface rupturing earthquakes on this segment may be the Ms=7.1+ 1874 and Ms=6.7 1875 events, and there were other destructive earthquakes prior to these events. The recurrence interval for a surface rupturing large (M>7) earthquake is estimated as minimum 100±35 and maximum 360 years. Estimates for the maximum possible paleoearthquake magnitude are (Mw) 7.1–7.7 for the Palu–Lake Hazar segment based on empirical magnitude fault rupture relations.An alluvial fan dated 14,475–15,255 cal years BP as well as another similar age fan with an abandoned stream channel on it are offset in a left-lateral sense 175 and 160.5 m, respectively, indicating an average slip rate of 11 mm/year. Because 127 years have elapsed since the last surface rupturing event, this slip rate suggests that 1.4 m of left-lateral strain has accumulated along the segment, ignoring possible creep effects, folding and other inelastic deformation. A 2.5 Ma age for the start of left-lateral movement on the segment, and in turn the EAFZ, is consistent with a slip rate of 11 mm/year and a previously reported 27 km total left-lateral offset. The cumulative 5–6 mm/year vertical slip rate near Lake Hazar suggests a possible age of 148–178 ka for the lake. Our trenching results indicate also that a significant fraction of the slip across the EAFZ zone is likely to be accommodated seismically. The present seismic quiescence compared with the past activity (paleoseismic and historic) indicate that the EAFZ may be “locked” and accumulating elastic strain energy but could move in the near future.  相似文献   

4.
Metamorphic core complexes are usually thought to be associated with regional crustal extension and crustal thinning, where deep crustal material is exhumed along gently dipping normal shear zones oblique to the regional extension direction. We present a new mechanism whereby metamorphic core complexes can be exhumed along crustal‐scale strike‐slip fault systems that accommodated crustal shortening. The Qazaz metamorphic dome in Saudi Arabia was exhumed along a gently dipping jog in a crustal‐scale vertical strike‐slip fault zone that caused more than 25 km of exhumation of lower crustal rocks by 30 km of lateral motion. Subsequently, the complex was transected by a branch of the strike‐slip fault zone, and the segments were separated by another 30 km of lateral motion. Strike‐slip core complexes like the Qazaz Dome may be common and may have an important local effect on crustal strength.  相似文献   

5.
R. Hinsch  K. Decker 《地学学报》2003,15(5):343-349
Seismic slip rates of about 0.2 mm yr?1 calculated from cumulative seismic moments of earthquakes along the Vienna Basin Transfer Fault (VBTF) between the Alps and the Carpathians are very low compared to geologically and geodetically determined slip rates of 1–2 mm yr?1, proving a significant seismic slip deficit. Additional seismic slip calculations for arbitrarily selected fault sectors reveal large differences along strike ranging from c. 0.02 to 0.5 mm slip yr?1. As the earthquake frequency distribution suggests seismically coupled deformation, these variations might indicate locked fault segments. Results suggest that (1) the seismic cycle of the VBTF exceeds the length of available seismological observation, and (2) larger earthquakes than those recorded may occur along the fault. Thus, current local seismic hazard estimates, which are solely based on this historical database, probably underestimate the earthquake potential of the fault system.  相似文献   

6.
We use three‐dimensional mechanical modelling with fault as Coulomb‐type frictional surface to explore the active deformation of the Xianshuihe–Xiaojiang fault system in south‐eastern Tibet. Crustal rheology is simplified as an elastoplastic upper crust and a viscoelastic lower crust. Far‐field GPS velocities and Quaternary fault slip rates are used to constrain the model results. Numerical experiments show that effective fault friction lower than ∼0.1–0.08 leads to a high slip rate that fits well with geological estimates of the slip rate on the fault system. Associating with the modelled fault slip rate, strain in the surrounding crust distributes broadly, and is partitioned into strike–slip and thrust senses. This means that in the Indian‐Eurasia convergence, accommodation of the large fraction of sinistral motion on the fault system is achieved mainly due to its lower fault friction. This in turn affects crustal deformation around the south‐eastern Tibetan margin, resulting in negligible compression across the Longmen Shan.  相似文献   

7.
In this study, we draw on a unique combination of well‐resolved fault‐slip data and earthquake focal mechanisms to constrain spatial variations in style of faulting in the obliquely extending Main Ethiopian Rift, East Africa. These data show that both boundary and internal faults – oblique and orthogonal to the plate divergence (PD) respectively – exhibit almost pure dip‐slip motion, and indicate significant local deflection in orientation of the extension direction at rift margins. Scaled analogue models closely replicate the multidisciplinary observations from the rift and suggest that the process is controlled by the presence of a deep‐seated, pre‐existing weakness – oblique to the direction of PD – that is able to cause a local rotation in the orientation of the extension direction at rift margins. Minor counterclockwise block rotations are required to accommodate the difference in slip direction along the different fault systems, as supported by existing and new palaeomagnetic data from the rift.  相似文献   

8.
The Bekten Fault is 20-km long N55°E trending and oblique-slip fault in the dextral strike-slip fault zone. The fault is extending sub-parallel between Yenice-Gönen and Sar?köy faults, which forms the southern branch of North Anatolian Fault Zone in Southern Marmara Region. Tectonomorphological structures indicative of the recent fault displacements such as elongated ridges and offset creeks observed along the fault. In this study, we investigated palaeoseismic activities of the Bekten Fault by trenching surveys, which were carried out over a topographic saddle. The trench exposed the fault and the trench stratigraphy revealed repeated earthquake surface rupture events which resulted in displacements of late Pleistocene and Holocene deposits. According to radiocarbon ages obtained from samples taken from the event horizons in the stratigraphy, it was determined that at least three earthquakes resulting in surface rupture generated from the Bekten Fault within last ~1300 years. Based on the palaeoseismological data, the Bekten Fault displays non-characteristic earthquake behaviour and has not produced any earthquake associated with surface rupture for about the last 400 years. Additionally, the data will provide information for the role of small fault segments play except for the major structures in strike-slip fault systems.  相似文献   

9.
The Gemmi fault is a prominent NW–SE striking lineament that crosses the Gemmi Pass in the central Swiss Alps. A multidisciplinary investigation of this structure that included geological mapping, joint profiling, cathodoluminescence and scanning electron microscopy, stable isotope measurements, luminescence- and U-TH-dating, 3D ground penetrating radar (GPR) surveying and trenching reveals a history of fault movements from the Miocene to the Holocene. The main fault zone comprises a 0.5–3 m thick calcite cataclasite formed during several cycles of veining and brittle deformation. Displaced Cretaceous rock layers show an apparent dextral slip of 10 m along the fault.A detailed study of a small sediment-filled depression that crosses the fault provides evidence for a post-glacial reactivation of the fault. A trench excavated across the fault exposed a Late-Glacial-age loess layer and late Holocene colluvial-like slope-wash deposits that showed evidence for fault displacement of a few centimeters, indicating a recent strike-slip reactivation of the fault. Focal mechanisms of recent instrumentally recorded earthquakes are consistent with our findings that show that the fault at the Gemmi Pass, together with other parallel faults in this area, may be reactivated in today's stress field. Taking together all the observations of its ancient and recent activity, the Gemmi fault can be viewed as a window through geological space and time.  相似文献   

10.
The Engadine Line (EL) is a seismically active fault in southeastern Switzerland. In the field we studied its western segment, presently not affected by seismicity but characterised by features suggesting neotectonic motions, and the coterminous Gruf Line. Uphill‐ and downhill‐facing scarps, offset rivers, non‐equilibrium hydrological conditions and aligned deep‐seated gravitational slope deformations are dominant in the western sector of the EL in the Inn Valley. Landform offsets and the most recent fault striations point to oblique left‐lateral strike‐slip. Close to the EL, at the Maloja Pass, a huge collapse beheaded the Inn Valley. Trench excavation with palaeoseismic analysis, stratigraphic correlations of Quaternary deposits and optically stimulated luminescence dating indicate that the collapse and faulting mostly occurred in the Late Pleistocene. In the Bregaglia Valley, the Gruf Line stretches along the southwestern extension of the EL. Six deep‐seated gravitational slope deformations developed along the Gruf Line and were dated to pre‐ and post‐Last Glacial Maximum times. We suggest that the western sector of the EL moved also in a Pleistocene time interval during which tectonic forces in the area were probably larger than at present, favouring local uplift, widespread gravity deformation, and retrogressive slope failure at the Inn Valley head. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

11.
Across the extreme south of Patagonia, the Magallanes‐Fagnano Fault (MFF) accommodates the left‐lateral relative motion between South America and Scotia plates. In this paper, we present an updated view of the geometry of the eastern portion of the MFF outcropping in Tierra del Fuego. We subdivide the MFF in eight segments on the basis of their deformation styles, using field mapping and interpretation of high‐resolution imagery. We quantify coseismic ruptures of the strongest recorded 1949, Mw7.5 earthquake, and determine its eastern termination. We recognize several co‐seismic offsets in man‐made features showing a sinistral shift up to 6.5 m, greater than previously estimated. Using 10Be cosmogenic nuclides depth profiles, we date a cumulated offset in post‐glacial morphologies and estimate the long‐term slip rate of the eastern MFF. We quantify a 6.4 ± 0.9 mm/a left‐lateral fault slip rate, which overlaps geodetic velocity and suggests stable fault behaviour since Pleistocene.  相似文献   

12.
Although sliced by several strike slip faults, a large part of Central Iran remained aseismic during the period of time covered by the instrumental and historical seismic records. Stating the existence of earthquakes in the Holocene is therefore important for the assessment of the regional seismic hazard. A palaeoseismic study of the Deshir fault demonstrates that Central Iran hosted large earthquakes during latest Pleistocene and Holocene. The last event corresponds to 1 m‐deep fissures, which sandy infilling yielded an optically stimulated luminescence (OSL) age of 2.8 ± 1.4 ka. At least two previous events, outlined by older fissures and/or colluvial wedges, have been recorded over the last 10–30 ka. The magnitudes are difficult to assess because the actual slips per event are unknown. The size of the fissures and the significant vertical displacement associated with a colluvial wedge are nevertheless compatible with M ≈ 7 events along a primary strike‐slip surface break.  相似文献   

13.
The Kongur Shan Extensional System (KES) is a ~250 km long normal fault system that bounds the Muji–Tashkorgan basin of the Chinese Pamir. It accommodates E–W extension due to the northward indentation of the Pamir salient, and its late Miocene activity has been the focus of tectonic studies. While the KES has a main normal component, ~WNW–ESE‐striking segments have an additional right‐lateral strike‐slip component. Here, we quantify late Quaternary horizontal and vertical slip rates at three locations along the KES, where active faults cut and offset abandoned geomorphic features. We find rates of >3–4 mm a?1 (horizontal) along the western Muji fault in the north and of ~1.7 mm a?1 (vertical) and ~1 mm a?1 (horizontal) along the Kongur Shan fault in the south during the late Pleistocene. These rates are consistent with GPS and late Miocene rates, and imply that E–W extension in the Muji–Tashkorgan basin is faster in the north than in the south.  相似文献   

14.
We explored the submarine portions of the Enriquillo–Plantain Garden Fault zone (EPGFZ) and the Septentrional–Oriente Fault zone (SOFZ) along the Northern Caribbean plate boundary using high‐resolution multibeam echo‐sounding and shallow seismic reflection. The bathymetric data shed light on poorly documented or previously unknown submarine fault zones running over 200 km between Haiti and Jamaica (EPGFZ) and 300 km between the Dominican Republic and Cuba (SOFZ). The primary plate‐boundary structures are a series of strike‐slip fault segments associated with pressure ridges, restraining bends, step overs and dogleg offsets indicating very active tectonics. Several distinct segments 50–100 km long cut across pre‐existing structures inherited from former tectonic regimes or bypass recent morphologies formed under the current strike‐slip regime. Along the most recent trace of the SOFZ, we measured a strike‐slip offset of 16.5 km, which indicates steady activity for the past ~1.8 Ma if its current GPS‐derived motion of 9.8 ± 2 mm a?1 has remained stable during the entire Quaternary.  相似文献   

15.
The acceleration response spectra of earthquakes with M = 4–6.5 in the southwestern part of the Baikal Rift Zone have been studied. The absorption properties of the medium and the attenuation of seismic signals in the study area were determined. Average acceleration response spectra were obtained for regional earthquakes. A comparative analysis of the acceleration response spectra was made for earthquake focal mechanisms with different senses of motion: reverse fault, reverse slip, strike slip, and oblique slip. The effect of the sense of fault motion in the seismic source on acceleration response spectra was determined.  相似文献   

16.
Based on high-resolution remote sensing image interpretation, digital elevation model 3-D analysis, field geologic field investigation, trenching engineering, and ground-penetrating radar, synthetic research on the evolution of the Yuguang Basin South Margin Fault (YBSMF) in northwest Beijing was carried out. We found that the propagation and growth of faults most often occurred often at two locations: the fault overlapping zone and the uneven or rough fault segment. Through detailed observation and analysis of all cropouts of faults along the YBSMF from zone a to zone i, we identified three major factors that dominate or affect fault propagation and growth. First, the irregularity of fault geometry determine the propagation and growth of the fault, and therefore, the faults always propagate and grow at such irregular fault segments. The fault finally cuts off and eliminates its irregularity, making the fault geometry and fault plane smoother than before, which contributes to the slipping movement of the half-graben block in the basin. Second, the scale of the irregularity of the fault geometry affects the result of fault propagation and growth, that is, the degree of the cutting off of fault irregularity. The degree of cutting off decreases as irregularity scale increases. Third, the maximum possible slip displacement of the fault segment influences the duration of fault propagation and growth. The duration at the central segments with a large slip displacement is longer than that at the end segments with a smaller slippage value.  相似文献   

17.
Fault‐bend folding is the most commonly used kinematic mechanism to interpret the architecture and evolution of thrust‐related anticlines in thrust wedges. However, its basic requirement of an instantaneous propagation of the entire fault before hangingwall deformation, limits its kinematic effectiveness. To overcome this limitation, we used the interdependence between fold shape and fault slip vs. propagation rate (S/P ratio) implemented in double‐edge fault‐propagation folding. We show that very small S/P values produce fault‐propagation anticlines that, when transported forelandward along an upper décollement layer, closely resemble fault‐bend anticlines. Accordingly, if small geometric discrepancies between the two solutions are accepted, transported double‐edge fault‐propagation provides an effective kinematic alternative to fault‐bend folding. Even at very low S/P values, it in fact predicts a fast but finite propagation rate of the fault. We thus propose that double‐edge fault‐propagation folding provides a broadly applicable model of fault‐related folding that includes fault‐bend folding as an end‐member kinematic solution. Terra Nova, 18, 270–275, 2006  相似文献   

18.
The spacing of parallel continental strike‐slip faults can constrain the mechanical properties of the faults and fault‐bounded crust. In the western US, evenly spaced strike‐slip fault domains are observed in the San Andreas (SA) and Walker Lane (WL) fault systems. Comparison of fault spacing (S) vs. seismogenic zone thickness (L) relationships of the SA and WL systems indicates that the SA has a higher S/L ratio (~8 vs. 1, respectively). If a stress‐shadow mechanism guides parallel fault formation, the S/L ratio should be controlled by fault strength, crustal strength, and/or regional stress. This suggests that the SA‐related strike‐slip faults are relatively weaker, with lower fault friction: 0.13–0.19 for the SA vs. 0.20 for WL. The observed mechanical differences between the San Andreas and Walker Lane fault systems may be attributed to variations in the local geology of the fault‐hosting crust and/or the regional boundary conditions (e.g. geothermal gradient or strain rate).  相似文献   

19.
We derive a slip rate for a frontal thrust in the western Hexi Corridor along the northern Qilian Shan by combining topographic profiling and 10Be exposure dating. The active Yumen‐Beidahe thrust fault offsets late Pleistocene alluvial‐fan deposits, and a prominent north‐facing scarp is well preserved. To quantify the slip rate, we surveyed the uplifted terraces and sampled quartz‐rich pebbles on terrace surfaces and river channels to determine surface exposure ages and pre‐depositional inheritance. The minimum vertical slip rate of the fault is 0.73 ± 0.09 mm a?1. This represents a horizontal shortening rate of 1.26 ± 0.31 mm a?1 for a fault dip of 30 ± 5°. This estimated slip rate supports the inference made from previous geological and GPS constraints that NNE‐directed shortening across the western Qilian Shan and the Hexi Corridor is distributed on several active faults with a total shortening rate of 4–10 mm a?1.  相似文献   

20.
Abstract: This paper examines major active faults and the present-day tectonic stress field in the East Tibetan Plateau by integrating available data from published literature and proposes a block kinematics model of the region. It shows that the East Tibetan Plateau is dominated by strike-slip and reverse faulting stress regimes and that the maximum horizontal stress is roughly consistent with the contemporary velocity field, except for the west Qinling range where it parallels the striking of the major strike-slip faults. Active tectonics in the East Tibetan Plateau is characterized by three faulting systems. The left-slip Kunlun-Qinling faulting system combines the east Kunlun fault zone, sinistral oblique reverse faults along the Minshan range and two major NEE-striking faults cutting the west Qinling range, which accommodates eastward motion, at 10–14 mm/a, of the Chuan-Qing block. The left-slip Xianshuihe faulting system accommodated clockwise rotation of the Chuan-Dian block. The Longmenshan thrust faulting system forms the eastern margin of the East Tibetan Plateau and has been propagated to the SW of the Sichuan basin. Crustal shortening across the Longmenshan range seems low (2–4 mm/a) and absorbed only a small part of the eastward motion of the Chuan-Qing block. Most of this eastward motion has been transmitted to South China, which is moving SEE-ward at 7–9 mm/a. It is suggested from geophysical data interpretation that the crust and lithosphere of the East Tibetan Plateau is considerably thickened and rheologically layered. The upper crust seems to be decoupled from the lower crust through a décollement zone at a depth of 15–20 km, which involved the Longmenshan fault belt and propagated eastward to the SW of the Sichuan basin. The Wenchuan earthquake was just formed at the bifurcated point of this décollement system. A rheological boundary should exist beneath the Longmenshan fault belt where the lower crust of the East Tibetan Plateau and the lithospheric mantle of the Yangze block are juxtaposed.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号