首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 46 毫秒
1.
郯庐断裂南段研究进展与断裂性质讨论   总被引:13,自引:3,他引:13  
据1:5万区域地质调查和专题研究资料,就郯庐断裂带是否南延与消失的原因,其与大别—苏鲁造山带交截形成的假位错效应,以及与中新生代沉积盆地形成演化的关系等作了新的阐述。在此基础上,讨论了郯庐断裂带是否为巨大的左行平移断层或转换断层。认为郯庐断裂带可能是在“古郯庐带”的基础上于早侏罗世重新活动、白垩纪强烈活动的地堑型枢纽断裂带。  相似文献   

2.
龙门山地区关口断裂形成与演化分析   总被引:1,自引:0,他引:1  
根据大量野外露头剖面资料与钻井数据,系统分析了关口断裂形成过程与演化特征。认为关口断裂在印支早、中期为张性大力构造背景下形成的同沉积正断层,在晚三叠世卡尼克期为生长性正断层;印支晚期构造事件中该断裂改变为逆冲断层。关口断裂活动性较强,其中在燕山晚期活动性最强。关口断裂在喜马拉雅期有多期次的、长时期的强烈活动;并且目前仍是一条活动性的断层。  相似文献   

3.
Based on high-resolution remote sensing image interpretation, digital elevation model 3-D analysis, field geologic field investigation, trenching engineering, and ground-penetrating radar, synthetic research on the evolution of the Yuguang Basin South Margin Fault (YBSMF) in northwest Beijing was carried out. We found that the propagation and growth of faults most often occurred often at two locations: the fault overlapping zone and the uneven or rough fault segment. Through detailed observation and analysis of all cropouts of faults along the YBSMF from zone a to zone i, we identified three major factors that dominate or affect fault propagation and growth. First, the irregularity of fault geometry determine the propagation and growth of the fault, and therefore, the faults always propagate and grow at such irregular fault segments. The fault finally cuts off and eliminates its irregularity, making the fault geometry and fault plane smoother than before, which contributes to the slipping movement of the half-graben block in the basin. Second, the scale of the irregularity of the fault geometry affects the result of fault propagation and growth, that is, the degree of the cutting off of fault irregularity. The degree of cutting off decreases as irregularity scale increases. Third, the maximum possible slip displacement of the fault segment influences the duration of fault propagation and growth. The duration at the central segments with a large slip displacement is longer than that at the end segments with a smaller slippage value.  相似文献   

4.
龚正  李海兵  唐方头  吴羿锋  王磊 《地质学报》2023,97(7):2111-2125
2008年汶川地震促使人们思考青藏高原东南缘走向和规模与龙门山断裂带相近的丽江- 小金河断裂的活动历史,但受限于地质条件制约断裂尤其是其北段相关研究极其薄弱。基岩断裂带的物质组成与结构特征是断层长期活动的产物,蕴含丰富的历史活动信息。本文以丽江- 小金河断裂盐源段多个天然剖面为研究对象,通过详细的断裂带宏观结构调查、断层岩显微构造及XRD分析发现:① 断层破碎带以一套厚度>20 m的破裂面密集带为特征,优势破裂面走向为NE20°~30°,推测为丽江- 小金河断裂长期活动形成的张剪性破裂;② 断层带核部以断层角砾岩和断层泥为主,灰岩角砾岩黏土矿物含量~2%,以伊利石和伊蒙混层为主,粉砂岩断层泥黏土矿物含量~52%,以坡缕石和绿泥石为主,石英含量36%,缺失长石类矿物。断裂带宏观结构和断层岩微观结构特征均表现为角砾呈棱角状,砾径差异极大且呈零散状分布,符合快速滑动特征,指示断层滑移方式为黏滑。此外,核部断层岩带统计厚5~8 m,这一规模相对于龙门山映秀- 北川断裂带核部180~280 m和安县- 灌县断裂带核部40~50 m显著偏小,表明前者自形成以来的活动性远低于后者,两者的地震行为并不能简单类比。结合断裂在宏观结构特征、断层岩成分与种类以及所反映的滑动方式与隆升剥蚀量的差异,认为丽江- 小金河断裂更可能是鲜水河断裂切断锦屏山- 龙门山构造带之后形成的,晚新生代与龙门山断裂带具有不同的活动历史。  相似文献   

5.
Field investigations allow to constrain the co-seismic surface rupture zone of ~400km with a strike-slip up to 16.3 m associated with the 2001Mw 7.8 Central Kunlun earthquake that occurred along the western segment of the Kunlun fault,northern Tibet.The co-seismic rupture structures are almost duplicated on the pre-existing fault traces of the Kunlun fault.The deformational characteristics of the co-seismic surface ruptures reveal that the earthquake had a nearly pure strike-slip mechanism.Theg eologic and topographice vidence clearly shows that spatial distributions of the co-seismic surface ruptures are re-stricted by the pre-existing geological structures of the Kunlun fault.  相似文献   

6.
《International Geology Review》2012,54(13):1575-1615
Salinia, as originally defined, is a fault-bounded terrane in westcentral California. As defined, Salinia lies between the Nacimiento fault on the west, and the Northern San Andreas fault (NSAF) and the main trace of the dextral SAF system on the east. This allochthonous terrane was translated from the southern part of the Sierra Nevada batholith and adjacent western Mojave Desert region by Neogene-Quaternary displacement along the SAF system. The Salina crystalline basement formed a westward promontory in the SW Cordilleran Cretaceous batholithic belt, relative to the Sierra Nevada batholith to the north and the Peninsular Ranges batholith to the south, making Salinia batholithic rocks susceptible to capture by the Pacific plate when the San Andreas transform system developed. Proper restoration of offsets on all branches of the San Andreas system is a critical factor in understanding the Salinia problem. When cumulative dextral slip of 171 km (106 mi) along the Hosgri–San Simeon–San Gregorio–Pilarcitos fault zone (S–N), or dextral slip of 200 km (124 mi) along the Hosgri–San Simeon–San Gregorio–Pilarcitos–northern San Andreas fault system, is added to the cumulative dextral slip of 315–322 km (196–200 mi) along the main trace of the SAF north of the San Emigdio–Tehachapi mountains, central California, there is a minimum amount of cumulative dextral slip of 486 km (302 mi) or a maximum amount of cumulative dextral slip of 522 km (324 mi) along the entire SAF system north of the Tehachapi Mountains. When these sums are compared with the offset distance (610–675 km or 379–420 mi) between the batholithic rocks associated with the Navarro structural discontinuity (NSD) in northern California, and those in the ‘tail’ of the southern Sierra Nevada granitic rocks in the San Emigdio–Tehachapi mountains, central California, a minimum deficit of from ~100 km (~62 mi) to a maximum deficit of ~189 km (~118 mi) is needed to restore the crystalline rocks associated with the NSD with the crystalline terranes within the San Emigdio and Tehachapi mountains – the enigma of Salinia. Two principal geologic models compete to explain the enigma (i.e. the discrepancy between measured dextral slip along traces of the SAF system and the amount of separation between the Sierra Nevada batholithic rocks near Point Arena in northern California and the Mesozoic and older crystalline rocks in the San Emigdio and Tehachapi mountains in southern California). (i) One model proposes pre-Neogene (>23 Ma), Late Cretaceous or Maastrichtian (<ca. 71 Ma) to early Palaeocene or Danian (ca. 66 Ma) sinistral slip of 500–600 km (311–373 mi) along the Nacimiento fault and of the western flank of Salinia from the eastern flank of the Peninsular Ranges (sinistral slip but in the opposite sense to later Neogene (<23 Ma) dextral slip along and within the SAF system. (ii) A second model proposes that the crystalline rocks of Salinia comprise a series of 100 km- (60 mi-) scale allochthonous (extensional) nappes that rode southwestward above the Rand schist–Sierra de Salinas (SdS) shear zone subduction extrusion channels. The allochthonous nappes are from NW–SE: (i) Farallon Islands–Santa Cruz Mountains–Montara Mountain, and adjacent batholithic fragments that appear to have been derived from the top of the deep-level Sierra Nevada batholith of the western San Emigdio–Tehachapi mountains; (ii) the Logan Quarry–Loma Prieta Peak fragments that appear to have been derived from the top of a buried detachment fault that forms the basement surface beneath the Maricopa sub-basin of the southernmost Great Valley; (iii) The Pastoria plate–Gabilan Range massif that appears to have been derived from the top of the deep-level SE Sierra Nevada batholith; and (iv) the Santa Lucia–SdS massif, which appears to be lower batholithic crust and underlying extruded schist that were breached westwards from the central to western Mojave Desert region. In this model, lower crustal batholithic blocks underwent ductile stretching above the extrusion channel schists, while mid- to upper-crustal level rocks rode southwestwards and westwards along trenchward dipping detachment faults. Salinian basement rocks of the Santa Lucia Range and the Big Sur area record the most complete geologic history of the displaced terrane. The oldest rocks consist of screens of Palaeozoic marine metasedimentary rocks (the Sur Series), including biotite gneiss and schist, quartzite, granulite gneiss, granofels, and marble. The Sur Series was intruded during Cretaceous high-flux batholithic magmatism by granodiorite, diorite, quartz diorite, and at deepest levels, charnockitic tonalite. Local nonconformable remnants of Campanian–Maastrichtian marine strata lie on the deep-level Salinia basement, and record deposition in an extensional setting. These Cretaceous strata are correlated with the middle to upper Campanian Pigeon Point (PiP) Formation south of San Francisco. The Upper Cretaceous strata, belonging to the Great Valley Sequence, include clasts of the basement rocks and felsic volcanic clasts that in Late Cretaceous time were brought to a coastal region by streams and rivers from Mesozoic felsic volcanic rocks in the Mojave Desert. The Rand and SdS schists of southern California were underplated beneath the southern Sierra Nevada batholith and the adjacent Salinia-Mojave region along a shallow segment of the subducting Farallon plate during Late Cretaceous time. The subduction trajectory of these schists concluded with an abrupt extrusion phase. During extrusion, the schists were transported to the SW from deep- to shallow-crustal levels as the low-angle subduction megathrust surface was transformed into a mylonitic low-angle normal fault system (i.e. Rand fault and Salinas shear zone). The upper batholithic plate(s) was(ere) partially coupled to the extrusion flow pattern, which resulted in 100 km-scale westward displacements of the upper plate(s). Structural stacking, temporal and metamorphic facies relations suggest that the Nacimiento (subduction megathrust) fault formed beneath the Rand-SdS extrusion channel. Metamorphic and structural relations in lower plate Franciscan rocks beneath the Nacimiento fault suggest a terminal phase of extrusion as well, during which the overlying Salinia underwent extension and subsidence to marine conditions. Westward extrusion of the subduction-underplated rocks and their upper batholithic plates rendered these Salinia rocks susceptible to subsequent capture by the SAF system. Evidence supporting the conclusion that the Nacimiento fault is principally a megathrust includes: (i) shear planes of the Nacimiento fault zone in the westcentral Coast Ranges locally dip NE at low angles. (ii) Klippen and/or faulted klippen are locally present along the trace of the Nacimiento fault zone from the Big Creek–Vicente Creek region south of Point Sur near Monterey, to east of San Simeon near San Luis Obispo in central California. Allochthonous detachment sheets and windows into their underplated schists comprise a composite Salinia terrane. The nappe complex forming the allochthon of Salinia was translated westward and northwestward ~100 km (~62 mi) above the Nacimiento megathrust or Franciscan subduction megathrust from SE California between ca. 66 and ca. 61 Ma (i.e. latest Cretaceous–earliest Palaeocene time). Much, or all, of the westward breaching of the Salinia batholithic rocks likely occurred above the extrusion channels of the Rand-SdS schists; following this event, the Franciscan Sur-Obispo terrane was thrust beneath the schists, perhaps during the final stages of extrusion in the upper channel. Later, the Sur-Obispo terrane was partially extruded from beneath the Salinia nappe terrane, during which time the upper plate(s) underwent extension and subsidence to marine conditions. Attenuation of the Salinia nappe sequence during the extrusion of the Franciscan Complex thinned the upper crust, making the upper plates susceptible to erosion from the top of the Franciscan Complex near San Simeon, where it is now exposed. In the San Emigdio Mountains, the relatively thin structural thickness of the upper batholithic plates made them susceptible to late Cenozoic flexural folding and disruption by high-angle dip–slip faults. The ~100 km (~62 mi) of westward and northwestward breaching of the Salinia batholithic rocks above the Rand-SdS channels, and the underlying Nacimiento fault followed by ~510 km (~320 mi) of dextral slip from ~23 Ma to Holocene time along the SAF system, allow for the palinspastic restoration of Salinia with the crystalline rocks of the San Emigdio–Tehachapi mountains and the Mojave terrane, resolving the enigma of Salinia.  相似文献   

7.
The Quaternary activity of the faults at the eastern end of the Altyn Tagh fault, including the Dengdengshan–Chijiaciwo, Kuantanshan and Heishan faults, was studied on the basis of interpretation of satellite images, trenching, geomorphologic offset measurements and dating. The Altyn Tagh fault has extended eastwards to Kuantanshan Mountain. The left–slip rates of the Altyn Tagh fault decreased through the Qilianshan fault and were transformed into thrust and folds deformation of many NW–trending faults within the Jiuxi basin. Meanwhile, under NE–directed compression of the Tibetan plateau, thrust dominated the Dengdengshan–Chijiaciwo fault northeast of the Kuantanshan uplift with a rate lower than that of every fault in the Jiuxi basin south of the uplift, implying that tectonic deformation is mainly confined to the plateau interior and the Hexi Corridor area. From continual northeastward enlargement of the Altyn Tagh fault, the Kuantanshan uplift became a triangular wedge intruding to the east, while the Kuantanshan area at the end of this wedge rose up strongly. In future, the Altyn Tagh fault will continue to spread eastward along the Heishan and Jintananshan faults. The results have implications for understanding the propagation of crustal deformation and the mechanism of the India–Eurasian collision.  相似文献   

8.
华熊地块马超营断裂走滑特征及演化   总被引:11,自引:0,他引:11  
对华熊地块南部的马超营断裂带的几何样式、组成特征及其变形特点等研究结果表明,马超营断裂带经历了韧性变形和脆性变形期。韧性变形分布于该断裂带的南侧,并发生了绿片岩相的动力变质作用,其中的S-C组构特征所指示的运动方向在其南北两侧,分别为向南和向北逆冲,呈现正花状特点,反映了该断裂带具有走滑逆冲性质的断裂。韧性变形主要发生于前印支期。燕山期,全面陆-陆碰撞期间其主要表现为脆性变形特征。脆性变形主要发育于其北侧,北东向的康山-七里坪断裂、红庄-陶村断裂是其次一级的派生断裂。通过对北东向断裂运动方向和前人的成果分析,以及这些构造的平面分布样式对比认为该断裂为一条左行走滑特征的断裂带。在此基础上,结合区域动力学背景,进而讨论了它的演化特征。  相似文献   

9.
研究表明,黄河口凹陷沙河街组三段中亚段发育的沉积相类型有辫状河三角洲相、扇三角洲相、湖底扇相和湖泊相。同沉积断裂特征对沉积具有控制作用,陡坡带活动盆缘断裂控制扇三角洲的分布,缓坡带活动盆缘断裂控制辫状河三角洲分布;二级断裂对湖底扇和深水沉积区有明显的控制作用,东部断阶带中部发育的F20东西向同沉积断裂,控制了物源的主要注入通道——沟谷,对东部物源的注入具有长期影响。  相似文献   

10.
岷山隆起边界断裂构造活动初步研究   总被引:16,自引:0,他引:16       下载免费PDF全文
岷山隆起西以岷江断裂为界,东为虎牙断裂。该地区构造活动强烈,地震活动频繁,是重要活动区。岷山隆起是岷江断裂和虎牙断裂由西向东的推覆逆掩运动差异运动导致的。GPS及地质研究表明岷江断裂、虎牙断裂现今仍在活动。岷江断裂为左右旋走滑断裂,运动速度大于2mm/a;虎牙断裂整体速度2.55mm/a,断裂性质为右旋走滑断裂,而震源机制解为左旋走滑断裂。这一结果,可能与GPS观测时段、位置及断裂面结构、几何特征有关。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号