首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The Upper Jurassic to Lower Cretaceous platform‐slope to basinal carbonate strata cropping out in Gargano Promontory (southern Italy) are partly dolomitized. Fieldwork and laboratory analyses (petrographic, petrophysical and geochemical) allowed the characterization of the dolomite bodies with respect to their distribution within the carbonate succession, their dimensions, geometries, textural variability, chemical stability, age, porosity, genetic mechanisms and relation with tectonics. The dolomite bodies range from metres to kilometres in size, are fault‐related and fracture‐related, and probably formed during the Early Cretaceous at <500 m burial depths and temperatures <50°C. The proposed dolomitization model relies on mobilization of Early Cretaceous seawater that flowed, downward and then upward, along faults and fractures and was modified in its isotopic composition moving through Triassic and Jurassic strata that underlie the studied dolomitized succession. Despite the numerous cases reported in literature, this study demonstrates that hydrothermal and/or high‐temperature fluids are not necessarily required for fault‐controlled dolomitization. Distribution and geometries of dolomite bodies can be used for palaeotectonic reconstructions, as they partly record the characteristics (size, attitude and kinematics) of the palaeo‐faults, even if not preserved, that controlled dolomitization. In Gargano Promontory, dolomites record Early Cretaceous palaeo‐faults from metres to kilometres long, striking north‐west/south‐east to east/west and characterized by normal to strike‐slip kinematics. Dolomitization increases the matrix porosity by up to 7% and, therefore, can improve the geofluid storage capacity of tight, platform‐slope to basinal limestones. The results have a great significance for characterization of geofluid (for example, hydrocarbons) reservoirs hosted in similar dolomitized carbonate successions. Distribution, size and shapes of reservoir rocks (i.e. dolomite bodies) could be broadly predictable if the characteristics of the palaeo‐fault system present at the time of dolomitization are known.  相似文献   

2.
The present article illustrates a straightforward case of hydrothermal dolomitization, affecting Jurassic platform limestones of the Provençal and Subbriançonnais Domains (Maritime Alps, North-Western Italy). Dolomitized bodies are randomly distributed within the host limestone, and are commonly associated with dolomite vein networks and tabular bodies of dolomite-cemented breccias discordant with respect to bedding. Main dolomite types are a finely to medium-crystalline replacive dolomite and a coarsely-crystalline saddle dolomite occurring both as replacive and as cement. Stratigraphic constraints indicate that dolomitization occurred during the Cretaceous, in a shallow burial context, and was due to the circulation of hot fluids (temperature about 200 °C, as indicated by fluid inclusion microthermometry) through faults and related fracture networks. Hydrothermal dolomitization therefore indirectly documents a Cretaceous fault activity in the Maritime Alps segment of the European Tethyan passive margin.  相似文献   

3.
Viséan limestones on the Isle of Man host numerous examples of fault‐controlled and fracture‐controlled dolomitization, which have been investigated to determine their macro‐scale to micro‐scale characteristics, geofluid origin, timing and relation to basin evolution. Geobodies composed of fabric destructive, ferroan, non‐planar dolomite range from several centimetres to >300 m wide and tens to hundreds of metres long parallel to faults and/or fractures; they have sharply defined margins, cross‐cut stratigraphy and locally finger out along beds or bed boundaries for tens of metres. Larger geobodies accompany NNE–SSW extensional faults with substantial breccia zones. One of these bodies hosts a sphalerite‐rich breccia deposit cemented by dolomite. Saddle dolomite lines or fills vugs and fractures within dolomite geobodies, and is a minor late diagenetic phase in undolomitized limestones. Replacive dolomite has low matrix porosity owing to non‐planar texture and associated cementation, and there is no evidence for subsequent leaching. Three dolomite stages are discriminated by texture, cathodoluminescence petrography and electron microscopy. Disseminated ‘Dolomite 1’ is substantially replaced and may be residual early diagenetic dolomite. Pervasive ‘Dolomite 2’ and ‘Dolomite 3’ have overlapping carbon–oxygen–strontium isotopic and fluid‐inclusion characteristics that indicate precipitation from allochthonous, high‐temperature (98 to 223°C) and high‐salinity (15 to 24 wt% NaCl eq.) brines. These variably equilibrated with host limestones and mixed with resident pore fluids. Overlying mudrocks formed a seal for ascending fluids. Integration of data from the mineral deposit suggests that fault‐fracture systems tapped different deep‐seated fluid reservoirs at different temperatures, and implies fluid interactions with both metamorphic basement and sedimentary cover in large‐scale circulation systems. This phenomenon probably took place during Mesozoic rifting, although an earlier event at the end of the Early Carboniferous cannot be discounted. In either case, a transient heat flow anomaly, previously unrecognized in the Irish Sea region, may be required to account for the hottest fluids.  相似文献   

4.
Dolomites occur extensively in Cambrian to Lower Ordovician carbonates in the Tienshan orogen of the Quruqtagh area, north‐east Tarim Basin, where thick (up to 1 km), dark grey lenticular limestones of semi‐pelagic to pelagic origin are prominent. The dolomites generally occur as beige, anastomosed geobodies that cross‐cut well‐stratified limestones. Based on detailed field investigations and petrographic examination, three types of matrix dolomite are identified: fine crystalline planar‐e (Md1), fine to medium crystalline planar‐s (e) (Md2) and fine to coarse crystalline non‐planar‐a (Md3) dolomites. One type of cement dolomite, the non‐planar saddle dolomite (Cd), is also common. The preferential occurrence of Md1 along low‐amplitude stylolites points to a causal link to pressure dissolution by which minor Mg ions were probably released for replacive dolomitization during shallow burial compaction. Type Md2, Md3 and Cd dolomites, commonly co‐occurring within the fractured zones, have large overlaps in isotopic composition with that of host limestone, implying that dolomitizing fluids inherited their composition from remnant pore fluids or were buffered by the formation water of host limestones through water–rock interaction. However, the lower δ18O and higher 87Sr/86Sr ratios of these dolomites also suggest more intense fluid–rock interaction at elevated temperature and inputs of Mg and radiogenic Sr from the host limestones with more argillaceous matter and possibly underlying Neoproterozoic siliciclastic strata. Secondary tensional faults and fractures within a compressional tectonic regime were probably important conduits through which higher‐temperature Mg‐rich fluids that had been expelled from depth were driven by enhanced tectonic compression and heating during block overthrusting, forming irregular networks of dolomitized bodies enclosed within the host limestones. This scenario probably took place during the Late Hercynian orogeny, as the Tarim block collided with Tienshan island arc system to the north and north‐east. Subsequent downward recharges of meteoric fluids into the dolomitizing aquifer probably terminated dolomitization as a result of final closure of the South Tienshan Ocean (or Palaeo‐Asian Ocean) and significant tectonic uplift of the Tienshan orogen. This study demonstrates the constructive role of notably tensional (or transtensional) faulting/fracturing in channelling fluids upward as a result of intense tectonic compression and heating along overthrust planes on the convergent plate margin; however, a relatively short‐lived, low fluid flux may have limited the dolomitization exclusively within the fractured/faulted limestones in the overthrust sheets.  相似文献   

5.
It has long been recognized that the Arab‐D reservoir in Ghawar field has been significantly dolomitized and that the distribution of dolomites is highly heterogeneous across this reservoir. Previous studies indicated that dolomite occurs with either a stratigraphic or non‐stratigraphic distribution; when mapped, dolomite tends to form several parallel linear trends across the field. Although stratigraphic dolomite was suggested to be formed early from highly evaporated pore fluids sourced from overlying evaporite deposits, non‐stratigraphic dolomite was thought to be generated primarily from hydrothermal fluids sourced from below. This study focuses primarily on these non‐stratigraphic dolomites, and proposes that: (i) these dolomites initially formed via seepage reflux, but were reinforced by late stage hydrothermal dolomitization; and (ii) reflux is also responsible for the formation of parallel, linear trends of dolomite. The reflux model hypothesizes that an evaporative lagoon (which is the source of dolomitizing fluids) formed during the falling stage systems tract of a depositional sequence, and that with continuing sea‐level fall this lagoon migrated progressively towards deeper parts of an intrashelf basin adjacent to the Ghawar field, leaving behind lines of dolomite bodies along a series of temporary coastlines. Two‐dimensional reactive transport models have been built to test this hypothesis, and have resulted in a predicted pattern of dolomite bodies that agrees with both the observed vertical distribution of non‐stratigraphic dolomite, as well as the mapped lateral distribution of the dolomite trends. In addition, the major ion compositions of Late Jurassic seawater are calculated based on fluid inclusion data in the literature. Using Jurassic seawater in current models leads to the absence of anhydrite cements and less potential of over‐dolomitization than using modern seawater.  相似文献   

6.
An integrated approach consisting of fracture analysis, petrography, carbon, oxygen and strontium‐isotope analyses, as well as fluid‐inclusion micro‐thermometry, led to a better understanding of the evolution of fluid–rock interactions and diagenesis of the Upper Permian to Upper Triassic carbonates of the United Arab Emirates. The deposited carbonates were first marked by extensive early dolomitization. During progressive burial, the carbonates were affected by dolomite recrystallization as well as precipitation of vug and fracture‐filling dolomite, quartz and calcite cements. After considerable burial during the Middle Cretaceous, sub‐vertical north–south oriented fractures (F1) were cemented by dolomite derived from mesosaline to hypersaline fluids. Upon the Late Cretaceous maximum burial and ophiolite obduction, sub‐vertical east–west fractures (F2) were cemented by dolomite (Dc2) and saddle dolomite (Ds) derived from hot, highly saline fluids. Then, minor quartz cement has precipitated in fractures from hydrothermal brines. Fluid‐inclusion analyses of the various diagenetic phases imply the involvement of increasingly hot (200°C) saline brines (20 to 23% NaCl eq.). Through one‐dimensional burial history numerical modelling, the maximum temperatures reached by the studied rocks are estimated to be in the range of 160 to 200°C. Tectonically‐driven flux of hot fluids and associated diagenetic products are interpreted to have initiated during the Late Cretaceous maximum burial and lasted until the Oligocene–Miocene compressional tectonics and related uplift. The circulation of such hydrothermal brines led to partial dissolution of dolomites (Dc2 and Ds) and to precipitation of hydrothermal calcite C1 in new (mainly oriented north–south; F3) and pre‐existing, reactivated fractures. The integration of the obtained data confirms that the diagenetic evolution was controlled primarily by the interplay of the burial thermal evolution of the basin and the regional tectonic history. Hence, this contribution highlights the impacts of regional tectonics and basin history on diagenetic processes, which may subsequently affect reservoir properties.  相似文献   

7.
Speleothems, mostly composed of calcium carbonate, are widely present in modern karst‐originated caves, but have rarely been reported in palaeokarst systems. This study presents a novel type of dolomite speleothem and subsequent submarine dolomite cement, which are widely present in the upper Ediacaran Dengying Formation in the upper Yangtze area. These precipitated materials occur in the cavity system that cuts across several peritidal cycles. The interconnected cavity networks with irregular shapes, embayed walls, internal breccias on cavity floor and their preferential development in the shallower cycle tops (for example, tepee‐deformed beds) suggest that they were initially generated by subaerial dissolution. As the earliest infills, the hemispherical protrusions, icicle‐like pendants and ground‐up columns show similar morphological features and occurrence patterns to the cave popcorn, stalactites and stalagmites, respectively. Thus, these earliest infills are speleothems resulting from associated meteoric precipitation during subaerial exposure. The isopachous growth pattern of subsequent more extensive fibrous dolomite cements points to a submarine diagenetic environment in which they were precipitated. Microscopically, the micritic to micro‐crystalline dolomite, acicular dolomite in speleothems and the subsequent fibrous dolomite share similar crystal fabrics to metastable precursors (for example, Mg‐calcite). Meanwhile, the carbon‐oxygen isotope compositions of the speleothem and fibrous dolomite, although partly altered by burial diagenesis, share a large overlap with host rock and coeval marine carbonates all over the Yangtze Platform. For these reasons, these speleothems and fibrous cements are considered to have been initially precipitated as metastable carbonate precursors in meteoric and submarine environments, respectively, and stabilized during submarine mimetic dolomitization. The cyclic occurrence of cavity systems filled with speleothems and submarine cements reflects periodic subaerial exposure and marine flooding of broad tidal flat in the upper Yangtze area, driven by high‐frequency sea‐level fluctuations. Furthermore, the Neoproterozoic seawater chemistry that favoured early dolomitization of carbonate precursor mineralogies was an advantage for the preservation of fabrics from metastable precursor minerals.  相似文献   

8.
《Sedimentology》2018,65(6):1973-2002
Dolomitization is commonly associated with crustal‐scale faults, but tectonic rejuvenation, diagenetic overprinting and a fluid and Mg mass‐imbalance often makes it difficult to determine the dolomitization mechanism. This study considers differential dolomitization of the Eocene Thebes Formation on the Hammam Faraun Fault block, Gulf of Suez, which has undergone a simple history of burial and exhumation as a result of rifting. Stratabound dolostone bodies occur selectively within remobilized sediments (debrites and turbidites) in the lower Thebes Formation and extend into the footwall of, and for up to 2 km away from, the Hammam Faraun Fault. They are offset by the north–south trending Gebel fault, which was active during the earliest phases of rifting, suggesting that dolomitization occurred between rift initiation (26 Ma) and rift climax (15 Ma). Geochemical data suggest that dolomitization occurred from evaporated (ca 1·43 concentration) seawater at less than ca 80°C. Geothermal convection is interpreted to have occurred as seawater was drawn down surface‐breaching faults into the Nubian sandstone aquifer, convected and discharged into the lower Thebes Formation via the Hammam Faraun Fault. Assuming a ca 10 Myr window for dolomitization, a horizontal velocity of ca 0·7 m year−1 into the Thebes Formation is calculated, with fluid flux and reactivity likely to have been facilitated by fracturing. Although fluids were at least marginally hydrothermal, stratabound dolostone bodies do not contain saddle dolomite and there is no evidence of hydrobrecciation. This highlights how misleading dolostone textures can be as a proxy for the genesis and spatial distribution of such bodies in the subsurface. Overall, this study provides an excellent example of how fluid flux may occur during the earliest phases of rifting, and the importance of crustal‐scale faults on fluid flow from the onset of their growth. Furthermore, this article presents a mechanism for dolomitization from seawater that has none of the inherent mass balance problems of classical, conceptual models of hydrothermal dolomitization.  相似文献   

9.
The Kesrouane Formation, which is characterized by pervasive dolomitization, has a stratigraphic thickness that exceeds 1000 m. It is part of a broad carbonate platform deposited in the Levant region and represents 60% of the Lebanese Jurassic rocks. Two genetically distinct dolostones are recognized within this unit: (1) fine‐to‐medium crystalline non‐planar grey dolostone; and (2) coarse‐crystalline planar beige dolostone. The former is stratabound and of Early Jurassic age (87Sr/86Sr = 0·707455). This dolostone locally exhi‐bits pseudomorphs of evaporite nodules, pointing towards seepage‐reflux dolomitization by hypersaline‐ to marine‐related fluids. Exposures of the coarse‐crystalline dolostone are associated with regional pre‐Cretaceous faults, along which Late Jurassic volcanics also occur. Sedimentological and diagenetic considerations coupled with microthermometry support a hydrothermal origin for this dolostone, with TH values of primary inclusions between 50 and 80 °C. The related dolomitizing fluids are mesosaline (3·5–12·0 eq. wt% NaCl), and are believed to result from the mixing of evaporative brines and sea water. Dolomitization is thus believed to have occurred in two stages, whereby fluids invaded the host rocks first by seepage‐reflux, explaining the resulting Early Jurassic stratabound dolostone, and later through fracture flow along the faults associated with the Late Jurassic volcanism, explaining the coarse‐crystalline hydrothemal dolostone.  相似文献   

10.
Hydrothermal mineral assemblages and related hydrothermally enhanced fracturing are common in the Precambrian Dengying Formation of Central Sichuan Basin. Petrographic and geochemical analyses of core samples show that the hydrothermal dolomite reservoirs of Dengying Formation consist of four main types of pores in the reservoir facies. These include: 1) hydrothermal dissolution vug(or pore), 2) intercrystalline pore, 3) residual inter-breccia vug(or pore), and 4) enlarged dissolved-fracture. There are three different fabrics dolomite in hydrothermal dolomite reservoirs, namely, saddle dolomite, fine-medium dolomite and micritic dolomite. Micritic dolomite is the original lithology of host rock. Saddle dolomite with curved or irregular crystal faces was directly crystallized from hydrothermal fluids(average temperature 192°C). Fine-medium dolomites are the products of recrystallization of micritic dolomite, resulting in abnormal geochemical characteristics, such as slight depletion of δ18O, significant enrichment of Mn-Fe and 87Sr/86Sr, and positive Eu anomaly. A model for the distribution of various hydrothermal dolomite reservoir facies is proposed here, which incorporates three fundamental geological controls: 1) extensional tectonics and tectono-hydrothermal events(i.e., the Xingkai Taphrogenesis of Late Sinian-Early Cambrian, and Emei Taphrogenesis of Late Permian), 2) hydrothermal fluid storage in clastic rocks with large thickness(e.g., Nanhua System of Chengjiang Formation and part of Doushantuo Formation), and 3) confining bed for hydrothermal fluids(such as, the shale in Qiongzhusi Formation). The supply of hydrothermal fluid is critical. Large basement-rooted faults and associated grid-like fracture system may function as the channels for upward migration of hydrothermal fluid flow. The intersection of the above-mentioned faults(including the conversion fault), especially transtensional sags above negative flower structures on wrench faults can serve as a key target for future hydrocarbon exploration.  相似文献   

11.
Burial hydrothermal dolomitization is a common diagenetic modification in sedimentary basins with implications for oil and gas reservoir performance. Outcrop analogues represent an easily accessible source of data to refine the genetic models and assess risk in hydrocarbon exploration and production. The Palaeozoic succession of northern Spain contains numerous excellent exposures of epigenetically dolomitized limestones, particularly in the Carboniferous and Cambrian. The epigenetic dolomites in the Cambrian carbonates of the Láncara Formation are volumetrically small, but have a large aerial distribution across different tectonic units of the Variscan fold and thrust belt. Coarse crystals, abundant saddle dolomite cement, negative δ18O and fluid inclusion homogenization temperatures between 80°C and 120°C characterize these dolomites, which are petrographically and geochemically similar to the tens of kilometre‐sized hydrothermal dolomites replacing the Upper Carboniferous succession in the same area. In both cases, the dolomitizing fluids are derived from highly evaporated sea water, modified to a limited degree through fluid‐rock interaction. The dolomitization events affecting both Cambrian and Carboniferous strata are probably related to the same post‐orogenic hydrothermal fluid flow. The formation of the post‐collisional (latest Carboniferous) Cantabrian arc fostered dolomitization: the extension related to bending of the arc generated deep‐reaching faults and strike‐slip movements, which favoured the circulation of hot dolomitizing fluids in the outer parts of this orocline. A similar dolomitization process affected other areas of Europe after the main stages of the Variscan orogeny. Dolomitization was a continuous, uninterrupted, isochemical process. Limestone replacement resulted in a major porosity redistribution and focused the fluid flow into the newly created porous zones. Replacement was followed immediately by partial to complete cementation of the pores (including zebra fabrics and vugs) with saddle dolomite. The amount of porosity left depends on the volume of cement and therefore on the volume of fluids available.  相似文献   

12.
Cambrian dolostone reservoirs in the Tarim Basin, China, have significant potential for future discoveries of petroleum, although exploration and production planning is hampered by limited understanding of the occurrence and distribution of dolomite in such ancient rocks buried to nearly 8 km. The study herein accessed new drill core samples which provide an opportunity to understand the dolomitization process in deep basins and its impact on Cambrian carbonate reservoirs. This study documents the origin of the dolostone reservoirs using a combination of petrology, fluid‐inclusion microthermometry, and stable and radiogenic‐isotopes of outcrop and core samples. An initial microbial dolomitization event occurred in restricted lagoon environments and is characterized by depleted δ13C values. Dolomicrite from lagoonal and sabkha facies, some fabric‐retentive dolomite and fabric‐obliterative dolomite in the peloidal shoal and reef facies show the highest δ18O values. These dolomites represent relatively early reflux dolomitization. The local occurrence of K‐feldspar in dolomicrite indicates that some radiogenic strontium was contributed via terrigenous input. Most fabric‐retentive dolomite may have precipitated from seawater at slightly elevated temperatures, suggested by petrological and isotopic data. Most fabric‐obliterative dolomite, and medium to coarse dolomite cement, formed between 90°C and 130°C from marine evaporitic brine. Saddle dolomite formed by hydrothermal dolomitization at temperatures up to 170°C, and involved the mixing of connate brines with Sr‐ enriched hydrothermal fluids. Intercrystalline, moldic, and breccia porosities are due to the early stages of dolomitization. Macroscopic, intergranular, vuggy, fracture and dissolution porosity are due to burial‐related dissolution and regional hydrothermal events. This work has shown that old (for example, Cambrian or even Precambrian) sucrosic dolomite with associated anhydrite, buried to as much as 8000 m, can still have a high potential for hosting substantial hydrocarbon resources and should be globally targeted for future exploration.  相似文献   

13.
A multidisciplinary study, conducted over the carbonate platform deposits of the Liassic Calcari Grigi Group (Southern Alps), highlighted how the use of outcrop analogues can contribute to better define the distribution of dolomitic bodies related to fault networks, to characterize the petrophysical properties of the dolomitic sequence and unravel a complex diagenetic history. This study was carried out in the Asiago Plateau (southernmost part of the eastern Southern Alps, northern Italy) which provides excellent outcrops of the Jurassic Calcari Grigi Group. The dolomitization of the Jurassic sequence is variable in terms of stratigraphic extension and geographic distribution. In the studied localities the dolomitization is generally limited to the Mount Zugna Formation and is characterized by an undulatory front, with ‘sub‐vertical dolomitic chimneys’ along the major faults. Within this unit, and often associated with faults, stacked high‐porosity and permeability bed‐parallel dolomitic bodies are developed that show excellent petrophysical properties. The dolomitic intervals are characterized by pervasive unimodal and patchy polymodal dolomite crystals. Thin section, cathodoluminescence, isotopic and fluid inclusion analyses were used to constrain the paragenetic evolution of the sequence which is similar in all the studied localities. The first dolomitization stage is marked by zoned dolomite crystals with a dull luminescent core. The porosity is thought to have increased after this stage, with dark blue luminescent dolomite accompanied by the corrosion of older crystals. The appearance of saddle dolomite marks the onset of the porosity reduction stage, ending with the infilling of vugs and the remaining open pores with calcite cement. The diagenetic evolution locally stopped at the saddle dolomite stage with the complete occlusion of the remaining pores. Paragenetic and fluid‐inclusion data suggest an evolutionary trend of increasing temperatures and decreasing salinity toward brackish fluids responsible for dolomite and calcite precipitation. The integration of the available data seem to indicate that the diagenetic evolution of the study area is related to: (i) the interplay between evolving fluids (from marine to brackish); (ii) the burial of the sequence (increasing temperature); and (iii) the evolution of the hydrogeological system (fault and fracture network, fluid mixing). This complex paragenetic evolution is strongly linked to the evolution of the porosity framework that evolved from a good, widespread network in the early stages of the burial history to a confined system in the later stages due to reduction of porosity by the deposition of late calcite and dolomite cements.  相似文献   

14.
Partially dolomitized carbonate successions provide a good opportunity to understand the commonly multistage process of dolomitization. Petrographic methods, fluid inclusion microthermometry and stable isotope measurements were applied to reconstruct the diagenetic evolution and dolomitization of a partially dolomitized Carnian reef limestone from the Transdanubian Range, Hungary. The diagenetic history began with reef diagenesis and formation of dolomite micro‐aggregates in microbial fabric elements; this was followed by the development of euhedral porphyrotopic dolomite crystals through overgrowths around the previously formed dolomite micro‐aggregates during the earliest burial stage. Increasing burial resulted in the extension of the dolomite patches via formation of finely crystalline replacement dolomite. From the Late Norian, when the Carnian reef carbonates reached the depth of 1·0 to 1·8 km, the diagenetic evolution continued in an intermediate to deep‐burial setting. Contemporaneously, an extensional regime was established, leading to fracturing. The progressive burial resulted in the recrystallization of the pre‐existing dolomite with increasing temperature, while saddle dolomite cement was precipitated in fractures. In connection with the Alpine Orogeny, intense denudation took place during the Late Cretaceous, accompanied by fracturing. Similar tectonically controlled denudation and fracturing occurred in several stages during the Cenozoic. As a result of these processes, the studied Carnian carbonates were raised to a near‐surface position or became subaerially exposed, leading to dedolomitization of the last dolomite phase and precipitation of calcite cement in cavities and fractures. This study revealed that by investigating partially and selectively dolomitized rock types, it is possible to document and understand those stages of the multiple dolomitization process which can barely be detected in the completely dolomitized rock bodies. Recognition of the dolomitization phases could provide the basis for the analysis of their relations with the depositional, diagenetic and tectonic processes, and stages of basin evolution.  相似文献   

15.
Hydrothermal Dolomite （HTD） is present in the Upper Sinian （Upper Proterozoic） Dengying Formation, east Sichuan Basin, China. The strata are comprised by primary dolomite. The HTD has various textures, including zebra dolomite, subhorizontal sheet-like cavities filled by saddle dolomite and breccias cemented by saddle dolomites as well occur as a fill of veins and fractures. Also co-occur MVT type lead-zinc ores in the study area. The δ13C and δ18O isotopes of HTD in the Upper Sinian Dengying Formation are lighter than those of the host rocks, while STSr/86Sr is higher. The apparent difference in carbon, oxygen and strontium isotopes, especially the large difference in S7Sr/S6Sr isotopes ratio indicate crystallization from hot basinal and/or hydrothermal fluids. Saddle dolomite was precipitated at temperatures of 270-320℃. The diagenetic parasequences of mineral assemblage deposited in the Dengying Formation are： （1） dolomite host rock →sphalerite-galena-barite-fluorite; （2） dolomite host rock →saddle dolomite →quartz; （3） dolomite host rock →saddle dolomite→bitumen; （4） dolomite host rock →saddle dolomite →barite. The mean chemical composition of the host dolomite matrix and HTD didn＇t change much during hydrothermal process. The fluids forming the HTDs in the Dengying Formation were mixtures of freshwater from the unconformity at the top of Sinian, fluids from diagenetic compaction and hydrocarbon generation ＆ expulsion from the Lower Cambrian Niutitang Formation mudstones or the Doushantuo Formation silty mudstones, and hydrothermal fluids from the basement. The hydrocarbon reservoirs associated with the HTD were mostly controlled by the basement faults and fractures and karsting processes at the unconformity separating Sinian and Cambrian strata. The hydrocarbon storage spaces of HTD included dissolved cavities and intercrystalline pores. Dissolution cavities are extensive at the top of Dengying Formation, up to about 46m below the unconformity between Sinian an  相似文献   

16.
The partly dolomitized Swan Hills Formation (Middle‐Upper Devonian) in the Simonette oil field of west‐central Alberta underwent a complex diagenetic history, which occurred in environments ranging from near surface to deep (>2500 m) burial. Five petrographically and geochemically distinct dolomites that include both cementing and replacive varieties post‐date stylolites in limestones (depths >500 m). These include early planar varieties and later saddle dolomites. Fluid inclusion data from saddle dolomite cements (Th=137–190 °C) suggest that some precipitated at burial temperatures higher than the temperatures indicated by reflectance data (Tpeak=160 °C). Thus, at least some dolomitizing fluids were ‘hydrothermal’. Fluorescence microscopy identified three populations of primary hydrocarbon‐bearing fluid inclusions and confirms that saddle dolomitization overlapped with Upper Cretaceous oil migration. The source of early dolomitizing fluids probably was Devonian or Mississippian seawater that was mixed with a more 87Sr‐rich fluid. Fabric‐destructive and fabric‐preserving dolostones are over 35 m thick in the Swan Hills buildup and basal platform adjacent to faults, thinning to less than 10 cm thick in the buildup between 5 and 8 km away from the faults. This ‘plume‐like’ geometry suggests that early and late dolomitization events were fault controlled. Late diagenetic fluids were, in part, derived from the crystalline basement or Palaeozoic siliciclastic aquifers, based on 87Sr/86Sr values up to 0·7370 from saddle dolomite, calcite and sphalerite cements, and 206Pb/204Pb of 22·86 from galena samples. Flow of dolomitizing and mineralizing fluids occurred during burial greater than 500 m, both vertically along reactivated faults and laterally in the buildup along units that retained primary and/or secondary porosity.  相似文献   

17.
The Precambrian Dengying Formation is a set of large-scale, extensively dolomitized, carbonate reservoirs occurring within the Sichuan Basin. Petrographic and geochemical studies reveal dolomitization was a direct result of precipitation by chemically distinct fluids occurring at different times and at different intensities. Based on this evidence, dolomitization and multiple fluid flow events are analyzed, and three types of fluid evolution models are proposed. Results of analysis show that Precambrian Dengying Formation carbonates were deposited in a restricted peritidal environment(630–542 Ma). A high temperature and high Mg~(2+) concentration seawater was a direct result of dolomitization for the micrite matrix, and for fibrous aragonite in primary pores. Geochemical evidence shows low δ~(18)O values of micritic dolomite varying from-1.29‰ to-4.52‰ PDB, abundant light rare earth elements(REEs), and low dolomite order degrees. Microbes and meteoric water significantly altered dolomite original chemical signatures, resulting in algal micritic dolomite and the fine-grained, granular, dolosparite dolomite having very negative δ~(18)O values. Finely crystalline cement dolomite(536.3–280 Ma) and coarsely crystalline cement dolomite have a higher crystallization degree and higher order degree. The diagenetic sequence and fluid inclusion evidence imply a linear correlation between their burial depth and homogenization temperatures, which closely resemble the temperature of generated hydrocarbon. Compared with finely crystalline dolomite, precipitation of coarsely crystalline dolomite was more affected by restricted basinal fluids. In addition, there is a trend toward a more negative δ~(18)O value, higher salinity, higher Fe and Mn concentrations, REE-rich. Two periods of hydrothermal fluids are identified, as the exceptionally high temperatures as opposed to the temperatures of burial history, in addition to the presence of high salinity fluid inclusions. The early hydrothermal fluid flow event was characterized by hot magnesium-and silicon-rich fluids, as demonstrated by the recrystallized matrix dolomite that is intimately associated with flint, opal, and microcrystalline quartz in intergranular or intercrystalline pores. This event was likely the result of a seafloor hydrothermal chimney eruption during Episode I of the Tongwan Movement(536.3±5.5 Ma). In contrast, later hydrothermal fluids, which caused precipitation of saddle dolomite, were characterized by high salinity(15–16.05 wt% NaCl equivalent) and homogenization temperatures(250 to 265°C), δ~(18)O values that were more enriched, and REE signatures. Geochemical data and the paragenetic sequence indicate that this hydrothermal fluid was related to extensive Permian large igneous province activity(360–280 Ma). This study demonstrates the presence of complicated dolomitization processes occurring during various paleoclimates, tectonic cycles, and basinal fluids flow; results are a useful reference for these dolomitized Precambrian carbonates reservoirs.  相似文献   

18.
白云石化作用及白云岩储层研究进展   总被引：1，自引：0，他引：1  
白云石化作用和白云岩储层一直都是碳酸盐岩研究中的重要领域。近年来,随着实验分析技术的进步以及油气勘探的深入,对白云岩的研究也取得了诸多进展:1数值模拟技术逐步应用到白云岩研究中,实现了白云石化模式研究由定性到定量的转变;2对微生物白云石化的研究不断加强,识别出了微生物相关白云石的特殊显微形貌特征并对其生物矿化机制进行了分析;3对已有白云石化模式的重新审视:包括对混合水白云石化的修正、对回流白云石化的扩展以及对构造—热液白云石化模式的丰富;4在白云石化与孔隙相关关系的研究中,突破了白云石化增孔的传统认识,逐步强调白云石化在孔隙保存方面的作用;5注重研究白云岩结构、成岩环境、原始相带以及白云岩形成之后的溶蚀改造等因素对白云岩储层发育的控制作用。在未来的研究中,应加强3个方面内容,一是对白云岩结构演化规律的定量研究,二是在成岩流体示踪方面要加强对新技术手段(如二元同位素、Mg同位素)的使用,同时注意借鉴成矿流体研究中的成熟技术和方法,三是要加强对深部白云岩储层形成和保存机制的探索。  相似文献   

19.
Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ18Owater and 87Sr/86Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO2-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.  相似文献   

20.
鄂尔多斯盆地奥陶系马家沟组马五段属于浅海碳酸盐层系,间夹蒸发岩层。盆地中东部通常含有白云岩,它们是主要油气储集层。一些研究者把它们看成近地表回流白云岩。然而白云岩的岩石学和地球化学表明这些白云岩具有埋藏成因的证据。〓〓马家沟组白云岩（马五段）具有暗红色阴极发光,微量元素Fe为5 500×10-6～6 200×10-6,Mn为170×10-6~210×10-6,稳定同位素氧组分为-7.093‰～-9.932‰PDB,（平均值为-8.671‰PDB）,稳定同位素锶（87Sr/86Sr）为0.709 766～0.708 65（有硅质碎屑物的放射性87Sr的影响）。薄片下可以看到白云石沿着裂缝交代,上述特征表明白云岩可能在埋藏条件下形成。〓〓白云岩稀土元素的分布模式与海水的稀土元素分布有明显的差别,缺少Ce和Eu的负异常,表明交代流体不会是海水或蒸发海水。包裹体的均一化温度为160~220℃,盐度为5wt%～25wt%,暗示白云石化作用温度高,压力大,交代流体为卤水。〓〓密西西比谷型（MVT）矿化作用（方铅矿和闪锌矿）以及共生的低温热液矿物——钾长石、萤石、石英、黄铁矿等表明白云岩具有区域热液特征。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号