首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
对湘中桃江锰矿废矿堆的废石进行了主量元素、稀土元素、微量元素和重金属元素的地球化学分析。野外观察及分析结果表明:组成废矿堆的岩石主要是赋矿围岩中奥陶统黑色页岩和原生碳酸锰矿石。这些废石富含Cu、Pb、Zn、Cr、Tl、Sb、U等重金属元素。废石暴露地表而遭受风化分解,导致Sc、V、Cr、U、Cd、Th等重金属元素淋滤释出,在废石样品中均表现出不同程度的迁移特征,且以V、Cd、U的迁移性最为强烈。此外,黑色页岩中Ni、Cu、Zn、Pb、Tl、Sb也明显发生淋失。这些重金属元素如Cd、Tl等毒性极强,进入矿区周围不断积聚,便可能对环境造成严重的影响。故对区内分布的废矿堆作为重金属污染源应高度重视。  相似文献   

2.
Consuming edible plants contaminated by heavy metals transferred from soil is an important pathway for human exposure to environmental contaminants. In the past several decades, heavy metal accumulation in contaminated soil has been widely studied; however, few researches investigated the background levels of metals in plants and evaluated the difference in plants grown in soils produced from different parent rocks. In this study, a systemic survey of heavy metal distribution and accumulation in the soil–pepper system was investigated in an unpolluted area, Hainan Island, China. Levels of Cu, Pb, Zn and Cd were measured in soils and pepper fruits from five representative pepper-growing areas with different soil parent rocks (i.e. basalt, granite, sedimentary rock, metamorphic rock and alluvial deposits). Average concentrations of Cu, Pb, Zn and Cd in pepper fruits were 11.52, 0.84, 8.77 and 0.05 mg/kg, respectively. The concentrations of heavy metals in soils are controlled by the parent materials and varied greatly from in different areas. Heavy metal contents in all pepper samples were lower than the Chinese maximum contaminant levels. The relationship between heavy metals in soils and biological absorption coefficient (BAC) of pepper fruits suggests that the uptake ability of pepper for soil metals depends mainly on the physiological mechanism, while in some cases, the soil types and supergene environment are also important.  相似文献   

3.
Historical mining dumps are useful archives for the investigation of weathering processes. The objective of this study was to investigate the weathering behavior of waste-rock material derived from the 800-year-old silver ore mining in Freiberg, Germany. For identifying time-dependent weathering indices, dumped material of four dumps of different ages and corresponding rock was examined regarding the geochemical composition. The dumped material is characterized by high contents of heavy metal containing sulfidic ores, such as pyrite, arsenopyrite, sphalerite and galena. Acid mine drainage is produced by the oxidative weathering of the sulfide minerals and causes the increased dissolving of soluble metals with increasing age of dumps. As a result of these weathering processes, a clear depletion of chalcophile elements in the older dump material (800 years) compared to the youngest dump (100 years) was observed. In the soil horizons downstream the dumps, high quantities of heavy metals (e.g., up to 12,000 ppm As, 3,300 ppm Pb, 640 ppm Zn), mainly adsorbed on organic matter, were determined and indicate a time-dependent element transfer from the dumps into their surrounding soils.  相似文献   

4.
Groundwater down-gradient from a mine rock dump in Dalarna, Sweden was sampled from the onset of snowmelt runoff (April) until October in order to investigate seasonal variations in groundwater composition. The results demonstrate that considerable variation in solute concentration (Al, Cu, Fe, SO42−, Zn) and acidity occurs in groundwater; the greatest change in solute concentrations occurs during the melting of the snow cover, when sulfide oxidation products are flushed from the rock dump. During this period, groundwater flow is concentrated near the soil surface with an estimated velocity of 1 m/day. Groundwater acidity varied by a factor of four closest to the rock dump during the sampling period, but these variations were attenuated with distance from the rock dump. Over a distance of 145 m, groundwater pH increases from 2.5 to 4.0 and acidity decreases from 3–13 to 0.8–1.1 meq/L, which is the combined effect of ferric iron precipitation and aluminosilicate weathering. As a result of flushing from the upper soil horizons, peaks in total organic carbon and ammonium concentrations in groundwater are observed at the end of snowmelt. In soils impacted by acidic surface runoff, the sequential extraction of C horizon soils indicates the accumulation of Cu in well-crystallized iron oxyhydroxides in the upper C horizon, while Cu, Fe, Ni and Zn accumulate in a well-crystallized iron oxyhydroxide hardpan that has formed 2.5m below the ground surface. Surface complexation modeling demonstrates that SO42− and Cu adsorb to the abundant iron oxyhydroxides at pH < 4, while Zn adsorption in this pH range is minimal.  相似文献   

5.
 A field survey and modelling of the oxidation and carbonate buffering reactions inside the alum-shale-containing waste rock dumps located in Maardu, Estonia, was accomplished. In the slope areas, the shale has been altered at high temperatures due to the spontaneous combustion and the pyritic acidity has been eliminated through migration of SOx gases out from the dump. In the central parts of the waste rock plateaus, low temperature pyrite oxidation fronts develop towards the dump depth and towards the centres of individual shale lumps. The main secondary phases precipitating in the weathering profile are gypsum, ferric oxyhydroxide, K-jarosite and smectite. The respective field data made it possible to calibrate the two-stage oxygen diffusion model and the characteristic pyrite oxidation rate 0.06–0.08 mol of pyrite reacted per kg of available water (pyrox/H2O value) was estimated to describe the first tens of years of dump performance. The model is capable to compare different shale disposal strategies that are illustrated with two case scenarios. The buffering of sulphuric acid by Mg-calcite appears to be an incongruent reaction with gypsum precipitating that leads to the build-up of the high Mg/Ca ratio in the leachate. Application of the Mg/Ca method estimates the pyrox/H2O value in the range of 0.05–0.14 mol/kg. Received: 26 January 1999 · Accepted: 23. February 1999  相似文献   

6.
Fine-grained floodplain sediments of the catastrophic 2002 flood deposited along the lower reaches of the Berounka and Vltava Rivers, Czech Republic, were not highly contaminated with heavy metals and other toxic elements. This is due to the dominantly mineral character of the sediments (Ctot in the range 3.97–5.01%, relatively low content of clay minerals), and due to the very high degree of contamination dilution by eroded pre-industrial non-contaminated floodplain sediments. Despite this high degree of dilution, the influence of the small Litavka River, draining the historical Pb–Zn–Ag Příbram ore region, is well visible. The Litavka River is one of important sources of Pb and Zn contamination in the whole Berounka–Vltava–Labe river system. The 2002 flood sediments deposited in the floodplain of the Berounka and Vltava Rivers show poor vertical chemical zoning, except for some components enriched in the uppermost layer by precipitation from evaporated pore-water contained in the mud, i.e. secondary carbonate. The content of Ccarb of the sediments (0.05–0.15%) is partly represented by this secondary carbonate, which is later leached by rainwater, and partly by fragments of river mollusk shells. A majority of the heavy metals contained in sediments can be readily leached by diluted acids, and to a much smaller degree by rainwater.  相似文献   

7.
 About 50 million tonnes/year of waste rock from coal-mining is generated in the limited area of the thickly populated Upper Silesian Coal Basin (USCB) in Poland. There are 380 coal-mining waste dumps, including 76 active dump sites covering over 2,000 ha. About 15-16 million tonnes/year of waste rock is being reused for civil engineering purposes in the same area. This brings about a problem of ground water deterioration by constituents leached from waste rock exposed to atmospheric conditions. The major factors determining the ground water contamination potential from waste rock are chloride salinity, sulfur content and acid generation potential. The concept behind the presented studies was to provide data for correct evaluation and prediction of contaminant release from the waste rock, based on the characterization of coal-mining waste properties, as well as on long-term laboratory, lysimetric and field studies. The results show that coal-mining waste dumps can be a long-term source of ground water contamination, lasting for decades and increasing with time. Ground water down-gradient from the disused 15–30-years-old part of the studied dump displays high and increasing acidification, high TDS, SO4, and the highest, still increasing concentrations of Mn, Fe and Zn. Cost-effective and efficient pollution control measures, similar to the presented design and construction elements of the dump site, can mitigate the negative environmental impacts. Received: 3 July 1997 · Accepted: 9 September 1998  相似文献   

8.
陈俊  王剑  雷海艳  马聪  孟颖  齐婧 《现代地质》2022,36(4):1009-1021
红山嘴油田是准噶尔盆地典型的风化壳型油藏,具有广阔的勘探前景。利用宏微观岩矿分析、地球物理、地球化学等多种实验分析手段,对红山嘴地区火成岩岩石学特征、结构发育特征及控制因素开展综合研究,结果表明:(1)红山嘴地区发育侵入岩、次火山岩、火山熔岩、火山碎屑熔岩、火山碎屑岩和沉火山碎屑岩等6大类火成岩,其中安山岩和凝灰岩最为发育;(2)火成岩储集空间组合包括原生气孔—溶蚀孔—Ⅰ级裂缝型、溶蚀孔—Ⅰ/Ⅱ级裂缝型、Ⅲ级裂缝型和Ⅳ级裂缝型4类,Ⅰ—Ⅳ类储层物性依次变差;(3)风化壳自上而下发育水解带、淋蚀带、崩解Ⅰ带、崩解Ⅱ带、母岩带5个分带,顶部水解带风化强,多被分解成致密的泥土层,可作盖层,而淋蚀带和崩解Ⅰ带是风化淋蚀改造较好区,储层物性最好;(4)不同油气产能井与风化壳结构具有很好的对应关系,可为风化壳型火成岩油藏优势区带划分和产能预测提供指导。  相似文献   

9.
Urban roadside soils are the “recipients” of large amounts of heavy metals from a variety of sources including vehicle emissions, coal burning waste and other activities. The behavior of heavy metals in urban roadside soils depends on the occurrence as well as the total amount. Accordingly, knowledge of the interactions between heavy metals and other constituents in the soil is required to judge their environmental impact. In this study, correlations of heavy metal concentrations (Pb, Zn, Cu, Ag, Se, Ni, Cr and Ba) to iron extracted using dithionite–citrate–bicarbonate (DCB) buffer (FeDCB), fulvic acids and particle size fractions were examined from the Xuzhou urban roadside soils. Heavy metals except for Cr and fulvic acids had a positive significant correlation with FeDCB, indicating these metals and fulvic acids are principally associated with the surfaces of iron oxides of the soils. Significant positive correlations were also found between the contents of fulvic acids and heavy metals, showing these heavy metals (especially for Cu, Ni and Cr) form stable complexes with fulvic acids. Such finding is of importance with regard to the increased mobilization of heavy metals, e.g., into freshwater ecosystems. Ag, Se and Cr are independent of particle size fractions because of their low concentrations of Ag and Se in the studied soils. Pb, Zn, Cu, Ba and Ag are mainly enriched in the finer soil particles (especially <16 μm).  相似文献   

10.
Heavy metals in soils are of great environmental concern, in order to evaluate heavy metal contents and their relationships in the surface soil of industrial area of Baoji city, and also to investigate their influence on the soils. Soil samples were collected from 50 sites, and the concentration of Pb, Zn, Cu, Cr, Ni heavy metals and the contents of characteristics in soil from industrial area of Baoji city were determined with X-ray fluorescence method. The concentrations of Pb, Zn, Cu, Cr and Ni in the investigated soils reached the amount of 2,682.00–76,979.42, 169.30–8,288.58, 62.24–242.36, 91.96–110.54 and 36.14–179.28 mg kg−1, respectively. The major element Pb contents of the topsoils were determined. to highlight the influence of ‘anthropic’ features on the heavy metal concentrations and their distributions. To compare, all values of elements were much higher than those of unpolluted soils in the middle of Shaanxi province that average 16.0–26.5, 67.1–120.0, 17.8–57.0, 46.9–65.6 and 24.7–34.6 mg kg−1 for Pb, Zn, Cu, Cr and Ni, respectively. An ensemble of basic and relativity analysis was performed to reduce the precipitate of Pb in soil was extremely high and greatly relativity with other elements. Meanwhile, Pb, Zn, Cu, Cr, Ni heavy metals were typical elements of anthropic activities sources, so it was easy to infer to the tracers of anthropic pollutions from the factorial analysis, which was coming from the storage battery manufactory pollutions. The pollutant distributions were constructed for the urban area which identified storage battery manufactory soot precipitate as the main source of diffuse pollution and also showed the contribution of the topsoils of industrial area of Baoji city as the source point of pollution. Consequently, the impact of heavy metals on soil was proposed and discussed. These results highlight the need for instituting a systematic and continuous monitoring of heavy metals and other forms of pollutants in Baoji city to ensure that pollution does not become a serious problem in the future.  相似文献   

11.
The concentration of heavy metals such as Ba, Co, Cr, Cu, Ni, Pb, Rb, Sr, V, Y, Zn, Zr were studied in soils of Balanagar industrial area, Hyderabad to understand heavy metal contamination due to industrialization and urbanization. This area is affected by the industrial activities like steel, petrochemicals, automobiles, refineries, and battery manufacturing generating hazardous wastes. The assessment of the contamination of the soils was based on the geoaccumulation index, enrichment factor (EF), contamination factor, and degree of contamination. Soil samples were collected from Balanagar industrial area from top 10–50 cm layer of soil. The samples were analyzed using X-ray fluorescence spectrometer for heavy metals. The data revealed that the soils in the study area are significantly contaminated, showing high level of toxic elements than normal distribution. The ranges of concentration of Cr (82.2–2,264 mg/kg), Cu (31.3–1,040 mg/kg), Ni (34.3–289.4 mg/kg), Pb (57.5–1,274 mg/kg), Zn (67.5–5819.5 mg/kg), Co (8.6–54.8 mg/kg), and V (66.6–297 mg/kg). The concentration of above-mentioned other elements was similar to the levels in the earth’s crust pointed to metal depletion in the soil as the EF was <1. Some heavy metals showed high EF in the soil samples indicating that there is a considerable heavy metal pollution, which could be correlated with the industries in the area. A contamination site poses significant environmental hazards for terrestrial and aquatic ecosystems. They are important sources of pollution and may results in ecotoxicological effects on terrestrial, groundwater and aquatic ecosystems.  相似文献   

12.
In this work we studied the accumulation of heavy metals in nine species of fish with different life and feeding habitats which are native and major commercial fish in the Baotou Urban Section of the Yellow River. The results showed that the concentration of heavy metals was significantly dependent on fish species; the pollution index of heavy metals in different species were ranked as Hemiculter leucisclus > Carassius auratus auratus > Hemibarbus maculatus > Megalobrama amblycephala > Abbottina rivularis > Cyprinus carpio > Squaliobarbus curriculus > Perccottus glehni > Saurogobio dabryi. Product–moment correlation coefficients among the metal pairs Pb–Zn, Cu–Cd, Cu–Zn, Cu–Pb, Pb–Cd, and Zn–Cd revealed there was no competitions between metals in each tissue. Correlations between heavy metal concentrations and fish length or weight indicated that accumulation of the heavy metals by the different fish species was related to their surrounding environments and their life and feeding habitats. According to the mean bioconcentration factors (BCFs), the heavy metal concentrations in these nine species were ranked Zn ≫ Cu > Cd ≈ Pb. In this work, the bioaccumulation factors (BAFs) were developed by using the sum of exchangeable and bound-to-carbonate heavy metals as Cs values. It was found that BAFs better reveal the accumulation characteristics of the heavy metals in the fish, which might provide an effective method for assessing bioaccumulation of heavy metals.  相似文献   

13.
Concentration and distribution of heavy metals (Cd, Cu, Pb and Zn) in urban soils of Hangzhou, China, were measured based on different land uses. The contamination degree of heavy metals was assessed on the basis of pollution index (PI), integrated pollution index (IPI) and geoaccumulation index (I geo). The 0.1 mol l−1 HCl extraction procedure and gastric juice simulation test (GJST) were used to evaluate the potential mobility and environmental risk of heavy metals in urban soils. The average concentration of Cd, Cu, Pb and Zn in urban soils was measured at 1.2 (with a range of 0.7–4.6), 52.0 (7.4–177.3), 88.2 (15.0–492.1) and 206.9 (19.3–1,249.2) mg kg−1, respectively. The degree of contamination increased in the order of industrial area (IA) > roadside (RS) > residential and commercial areas (RC) > public park and green areas (PG). The PIs for heavy metals indicated that there is a considerable Cd, Cu, Pb and Zn pollution, which originate from traffic and industrial activities. The IPI of these four metals ranged from 1.6 to 11.8 with a mean of 3.5, with the highest IPI in the industrial area. The assessment results of I geo also supported that urban soil were moderately contaminated with Cd and to a lesser extent also with Cu, Pb and Zn. The IP and I geo values reveal the pollution degree of heavy metal was the order of Cd > Pb > Zn ≈ Cu. It was shown that mobility and bioavailability of the heavy metals in urban soils increased in the order of Cd > Cu > Zn ≈ Pb. Owing to high mobility of Cd and Cu in the urban soils, further investigations are needed to understand their effect on the urban environment and human health. It is concluded that industrial activities and emissions from vehicles may be the major source of heavy metals in urban contamination. Results of this study present a rough guide about the distribution and potential environmental and health risk of heavy metals in the urban soils.  相似文献   

14.
Organic amendment application to heavy metal contaminated soils may contribute to leaching of phosphorus (P). The objectives of this study were to determine the influence of sheep manure and ethylenediamine tetraacetic acid (EDTA) on the P leaching from a wide range of calcareous contaminated soils. Glass tubes, 4.9 cm diameter, and 40 cm long, were packed with contaminated soil. The resulting 20 cm long column of soils had bulk density of 1.3–1.4 g cm−3. The columns were leached with distilled water, 0.01 M EDTA, 0.01 M CaCl2 or sheep manure extract (SME) solutions. The breakthrough curves for P were different and the amounts of P leached varied considerably between different soils and leaching solutions. The amounts leached with SME were less than the amount added through the SME, indicating that some P was retained by the soil, mainly due to preliminary sorption of organic ligands on to the soil with the creation of new sorbing surfaces. The amount leached with EDTA solution varied from 9.9 to 46.3% of the extractable P when 15 pore volumes had passed through the column. Low amounts of P were leached by 0.01 M CaCl2, which is likely to be due to the high concentration of soluble Ca used in the solution. Thus, among leaching solutions the application of EDTA and SME on contaminated calcareous soils might enhance the mobility of P and large amounts of P will be leached, leading to contamination of ground and surface waters.  相似文献   

15.
Urban roadside soils are important environmental media for assessing heavy metal concentrations in urban environment. However, among other things, heavy metal concentrations are controlled by soil particle grain size fractions. In this study, two roadside sites were chosen within the city of Xuzhou (China) to reflect differences in land use. Bulk soil samples were collected and then divided by particle diameter into five physical size fractions, 500–250, 250–125, 125–74, 74–45, < 45 μm. Concentrations of metals (Ti, Cr, Al, Ga, Pb, Ba, Cd, Co, Cu, Mn, Ni, V, Zn, Mo, As, Sb, Se, Hg, Bi, Ag) were determined for each individual fraction. These metals could be roughly classified into two groups: anthropogenic element (Pb, Ba, Cd, Cu, Zn, Mo, As, Sb, Se, Hg, Bi, Ag) and lithophile element (Ti, Cr, Al, Ga, Co, Mn, Ni, V) in terms of values of enrichment factor. As expected, higher concentrations of anthropogenic heavy metals (Cu, Zn, Mo, As, Hg, Bi, Ag) are observed in the finest particle grain size fraction (i.e. < 45 μm). However, heavy metals Se, Sb and Ba behave independently of selected grain size fractions. From the viewpoint of mass loading, more than 30% of the concentrations for all anthropogenic heavy metals are contributed by the particle grain size fractions of 45–74 μm at site 1 and more than 70% of the concentrations for all heavy metals are contributed by the particle grain size fractions of 45–74 and 74–125 μm at site 2. These results are important for transport of soil-bound heavy metals and pollution control by various remedial options.  相似文献   

16.
 Trace element geochemistry of humus (<0.425 mm) and till (<0.002 mm) collected in the Flin Flon-Snow Lake area, northern Manitoba and Saskatchewan, provides a regional context for assessing smelter contamination in the environment. The area includes a Cu-Zn smelter known to discharge As, Cd, Cu, Fe, Hg, Pb, and Zn. In this study, sequential extraction analyses, scanning electron microscopy and x-ray diffraction analyses were used on a suite of samples to determine: (1) the chemical and physical characteristics of heavy metals in surficial sediments related to distance from the smelter, (2) criteria for assessing the relative contribution of these metals from natural and anthropogenic sources, and (3) the potential of these metals for remobilization in the environment. Humus geochemistry reflects the anthropogenic and natural component of heavy metal concentrations. Smelter-related elements show anomalously high values adjacent to the smelter, decreasing with distance until background values are reached at 70–104 km, depending on the element. In humus, Zn is associated primarily with labile phases; Hg with non-labile phases. Adjacent to the smelter, high proportions and concentrations of Zn and Hg in non-labile phases, indicative of smelter-derived particulates, are confirmed by SEM examination. The particles occur as spheres, irregular grains, and with organics. With increasing distance from the smelter, the geochemical response to bedrock composition is more obvious than the anthropogenic input. Till geochemistry reflects the natural variation imposed by bedrock composition. At highly contaminated sites (<3 km from the smelter), increased percentages of smelter-related elements in labile phases suggests heavy metals are leached from humus to the underlying sediment. Received: 5 November 1996 · Accepted: 31 March 1997  相似文献   

17.
The concentrations of heavy metals (As, Ba, Co, Cr, Cu, Ni, Mo, Pb, Sr, V and Zn) were studied in soils to understand metal contamination due to industrialization and urbanization around Manali industrial area in Chennai, Southern India. This area is affected by the industrial activity and saturated by industries like petrochemicals, refineries, and fertilizers generating hazardous wastes. The contamination of the soils was assessed on the basis of geoaccumulation index, enrichment factor (EF), contamination factor and degree of contamination. Soil samples were collected from the industrial area of Manali from the top 10-cm-layer of the soil. Soil samples were analyzed for heavy metals by using Philips MagiX PRO-2440 Wavelength dispersive X-ray fluorescence spectrometry. The data revealed elevated concentrations of Chromium (149.8–418.0 mg/kg), Copper (22.4–372.0 mg/kg), Nickel (11.8–78.8 mg/kg), Zinc (63.5–213.6 mg/kg) and Molybdenum (2.3–15.3 mg/kg). The concentrations of other elements were similar to the levels in the earth’s crust or pointed to metal depletion in the soil (EF < 1). The high-EFs for some heavy metals obtained in the soil samples show that there is a considerable heavy metal pollution, which could be correlated with the industries in the area. Contamination sites pose significant environmental hazards for terrestrial and aquatic ecosystems. They are important sources of pollution and may result in ecotoxicological effects on terrestrial, groundwater and aquatic ecosystems. In this perspective there is need for a safe dumping of waste disposal in order to minimize environmental pollution.  相似文献   

18.
 The southern Voltaian Sedimentary Basin underlies an area of about 5000 km2 in east-central Ghana. Groundwater in the basin occurs in fractures in highly consolidated siliciclastic aquifers overlain by a thin unsaturated zone. Aquifer parameters were evaluated from available aquifer-test data on 28 shallow wells in the basin. Hydraulic-conductivity values range from 0.04–3.6 m/d and are about two orders of magnitude greater than the hydraulic conductivity calculated using Darcy's Law and the average groundwater velocity estimated from carbon-14 dating. Linear-regression analysis of the transmissivity and specific-capacity data allowed the establishment of an empirical relationship between log transmissivity and log specific capacity for the underlying aquifers. Groundwater chemistry in the basin is controlled by the weathering of albitic plagioclase feldspar. The weathering rates of various minerals were estimated using 14C-derived average velocity in the basin. The weathering rate of albite was calculated to be 2.16 μmol L–1 yr–1 with the resulting formation of 3.3 μmol L–1 yr–1 of kaolinite and 0.047 μmol L–1 yr–1 of calcite. The low porosity and permeability of the aquifers in the basin are attributed to the precipitation of secondary minerals on fracture surfaces and interlayer pore spaces. Received, September 1997 Revised, July 1998, August 1998 Accepted, August 1998  相似文献   

19.
The formation of colloids during the weathering of phyllite was investigated by exposing ground phyllite to Milli-Q water. Secondary mineral colloids of 101–102 nm were detected in significant concentrations. At pH of about 8.5, the solution concentration of these colloids reached up to 10 mg/L (however, acidification to pH 4.0 prevented the formation of the colloids). The mineralogical composition of the secondary mineral colloids is assumed to be a mixture of ferrihydrite, manganese oxyhydroxides, aluminosilicates, amorphous Al(OH)3 and gibbsite with possible additions of iron silicates and␣iron-alumino silicates. The colloids were stable over longer periods of time (at least several weeks), even in the presence of suspended ground rock. Direct formation of iron-containing secondary mineral colloids at the rock–water interface by the weathering of rock material is an alternative to the well-known mechanism of iron colloid formation in the bulk of water bodies by mixing of different waters or by aeration of anoxic waters. This direct mechanism is of relevance for colloid production during the weathering of freshly crushed rock in the unsaturated zone as for instance crushed rock in mine waste rock piles. Colloids produced by this mechanism, too, can influence the transport of contaminants such as actinides because these colloids have a large specific surface area and a high sorption affinity.  相似文献   

20.
A 54-m long core was raised from the bed of the Nal Sarovar, a large shallow lake located in the middle of the low-lying region linking the Gulfs of Kachchh and Khambhat, in western India. A three-layer sequence comprising: Zone-1 (top 3 m), predominantly silty-clay/clayey; Zone-2 (3–18 m), sandy; and Zone-3 (18–54 m), dominated by sticky silty-clay/clayey-silt with occasional thin sand layers and basalt fragments was identified. Smectite and illite are the dominant clay minerals with minor amounts of kaolinite and chlorite. Very high content of smectite (53–97%) in the clays of the lowermost zone (18–54 m) and the geomorphic features of the surrounding region suggested that the sediments were derived from the basaltic terrain of Saurashtra and/or via the Gulf of Khambhat. The clay content in the middle zone (3–18 m), dominantly sandy, is very low. Therefore, provenance for this zone was derived using heavy minerals in the sand fraction. The heavy mineral species in this zone suggested the mixed metamorphic and igneous terrain of Aravallis as the major source. The grain-size distribution of this zone closely matched with the sediments underlying the modern Sabarmati riverbed at Ahmedabad, suggesting fluvial depositional environment. Clays also dominate sediments of the topmost (0–3 m) zone with illite as the dominant (74–81%) specie followed by smectite suggesting derivation from the mixed metamorphic and igneous terrain of Aravallis.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号