首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 125 毫秒
1.
The Huayuan Pb-Zn ore district in China, located in western Hunan Province, is a giant carbonate-hosted Pb-Zn ore district. The source of ore-forming brines in this ore district remains poorly constrained. Whether the highly saline brines are derived from evaporated seawater or dissolved evaporates continues to be intensely debated. Carbonate minerals associated with Pb-Zn mineralization have δ13CV-PDB and δ18OV-SMOW values ranging from ?5.55‰ to +1.35‰ (mean value of ?0.69‰; n = 14) and +16.28‰ to +25.05‰ (mean value of +20.22‰; n = 14), respectively. This indicates that carbonate minerals are dominantly formed from dissolved ore-hosted carbonate rocks. The δ34S values of sulfides range from +20.2‰ to +36.8‰, with an average value of +30.0‰ (n = 27). These results suggest that sulfur is predominantly derived from the thermochemical sulfate reduction of marine sulfate. The crush-leach analyzed solute data of fluid inclusions in sphalerite show the ore-forming fluids have Cl/Br molar ratios range from 118 to 384, and Na/Br molar ratios from 39 to 160 (n = 8). These Cl/Br ratios of hydrothermal fluid are much lower than those of seawater (657 to 564), but are consistent with bittern brines through early halite precipitation. We propose that ore-forming fluids are mainly derived from evaporitic basin brines, which leached base metals from the basement and/or country rocks. The brine then migrated to the basin margins through clastic rocks of basement and then precipitated sul?des by thermochemical sulfate reduction.  相似文献   

2.
The Yinchanggou-Qiluogou Pb-Zn deposit,located in the western Yangtze Block,southwest China,is hosted by the Upper Sinian Dengying Formation dolostone.Ore bodies occur in the Qiluogou anticline and the NS-and NNW-trending faults.Sulfide ores mainly consist of sphalerite,pyrite,galena and calcite,with subordinate dolomite and quartz.Seventeen ore bodies have been discovered to date and they have a combined 1.0 million tons of sulfide ores with average grades of 2.27wt%Zn and 6.89wt%Pb.The δD_(H2O-SMOW) and δ~(18)O_(H2O-SMOW) values of fluid inclusions in quartz and calcite samples range from-68.9‰ to-48.7‰ and 7.3‰ to 15.9‰,respectively,suggesting that H_2O in the hydrothermal fluids sourced from metamorphic water.Calcite samples have δ~(13)C_(PDB) values ranging from-6.2‰ to-4.1‰ and δ~(18)O_(SMOW) values ranging from 15.1‰ to 17.4‰,indicating C and O in the hydrothermal fluids likely derived from a mixed source of metamorphic fluids and the host carbonates.The δ~(34)S_(CDT) values of sulfide minerals range from 5.5‰ to 20.3‰,suggesting that thermal chemical reduction of sulfate minerals in evaporates were the most probable source of S in the hydrothermal fluids.The ~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb and ~(208)Pb/~(204)Pb ratios of sulfide minerals fall in the range of 18.11 to 18.40,15.66 to 15.76 and 38.25 to 38.88,respectively.The Pb isotopic data of the studied deposit plot near the upper crust Pb evolution curve and overlap with the age-corrected Proterozoic basement rocks and the Upper Sinian Dengying Formation hosting dolostone.This indicates that the Pb originated from a mixed source of the basement metamorphic rocks and the ore-hosting carbonate rocks.The ore geology and C-H-O-S-Pb isotopic data suggest that the YinchanggouQiluogou deposit is an unusual carbonate-hosted,strata-bound and epigenetic deposit that derived ore-forming materials from a mixed source of the underlying Porterozoic basements and the Sinian hosting carbonates.  相似文献   

3.
The extensive Changba-Lijiagou Pb-Zn deposit is located in the north of the Xihe–Chengxian ore cluster in West Qinling. The ore bodies are mainly hosted in the marble, dolomitic marble and biotite-calcite-quartz schist of the Middle Devonian Anjiacha Formation, and are structurally controlled by the fault and anticline. The ore-forming process can be divided into three main stages, based on field geological features and mineral assemblages. The mineral assemblages of hydrothermal stage I are pale-yellow coarse grain, low Fe sphalerite, pyrite with pits, barite and biotite. The mineral assemblages of hydrothermal stage II are black-brown cryptocrystalline, high Fe shalerite, pyrite without pits, marcasite or arsenopyrite replace the pyrite with pits, K-feldspar. The features of hydrothermal stage III are calcite-quartz-sulfide vein cutting the laminated, banded ore body. Forty-two sulfur isotope analyses, twenty-five lead isotope analyses and nineteen carbon and oxygen isotope analyses were determined on sphalerite, pyrite, galena and calcite. The δ34 S values of stage I(20.3 to 29.0‰) are consistent with the δ34 S of sulfate(barite) in the stratum. Combined with geological feature, inclusion characteristics and EPMA data, we propose that TSR has played a key role in the formation of the sulfides in stage I. The δ34 S values of stage II sphalerite and pyrite(15.1 to 23.0‰) are between sulfides in the host rock, magmatic sulfur and the sulfate(barite) in the stratum. This result suggests that multiple S reservoirs were the sources for S2-in stage II. The δ34 S values of stage III(13.1 to 22‰) combined with the structure of the geological and mineral features suggest a magmatic hydrothermal origin of the mineralization. The lead isotope compositions of the sulfides have 206 Pb/204 Pb ranging from 17.9480 to 17.9782, 207 Pb/204 Pb ranging from 15.611 to 15.622, and 208 Pb/204 Pb ranging from 38.1368 to 38.1691 in the three ore-forming stages. The narrow and symmetric distributions of the lead isotope values reflect homogenization of granite and mantle sources before the Pb-Zn mineralization. The δ13 CPDB and δ18 OSMOW values of stage I range from-0.1 to 2.4‰ and from 18.8 to 21.7‰. The values and inclusion data indicate that the source of fluids in stage I was the dissolution of marine carbonate. The δ13 CPDB and δ18 OSMOW values of stage II range from-4 to 1‰ and from 12.3 to 20.3‰, suggesting multiple C-O reservoirs in the Changba deposit and the addition of mantle-source fluid to the system. The values in stage III are-3.1‰ and 19.7‰, respectively. We infer that the process of mineralization involved evaporitic salt and sedimentary organic-bearing units interacting through thermochemical sulfate reduction through the isotopic, mineralogy and inclusion evidences. Subsequently, the geology feature, mineral assemblages, EPMA data and isotopic values support the conclusion that the ore-forming hydrothermal fluids were mixed with magmatic hydrothermal fluids and forming the massive dark sphalerite, then yielding the calcite-quartz-sulfide vein ore type at the last stage. The genesis of this ore deposit was epigenetic rather than the previously-proposed sedimentary-exhalative(SEDEX) type.  相似文献   

4.
The Mayuan stratabound Pb-Zn deposit in Nanzheng,Shaanxi Province,is located in the northern margin of the Yangtze Plate,in the southern margin of the Beiba Arch.The orebodies are stratiform and hosted in breciated dolostone of the Sinian Dengying Formation.The ore minerals are primarily sphalerite and galena,and the gangue minerals comprise of dolomite,quartz,barite,calcite and solid bitumen.Fluid inclusions from ore-stage quartz and calcite have homogenization tempreatures from 98 to 337℃ and salinities from 7.7 wt%to 22.2 wt%(NaCl equiv.).The vapor phase of the inclusions is mainly composed of CH_4 with minor CO_2 and H_2S.The δD_(fluid) values of fluid inclusions in quartz and calcite display a range from-68‰ to-113‰(SMOW),and the δ~(18)O_(fluid)values calculated from δ~(18)O_(quartz) and δ~(18)O_(calcite) values range from 4.5‰ to 16.7‰(SMOW).These data suggest that the ore-forming fluids may have been derived from evaporitic sea water that had reacted with organic matter.The δ~(13)C_(CH4) values of CH_4 in fluid inclusions range from-37.2‰ to-21.0‰(PDB),suggesting that the CH_4 in the ore-forming fluids was mainly derived from organic matter.This,together with the abundance of solid bitumen in the ores,suggest that organic matter played an important role in mineralization,and that the thermochemical sulfate reduction(TSR) was the main mechanism of sulfide precipitation.The Mayuan Pb-Zn deposit is a carbonate-hosted epigenetic deposit that may be classified as a Mississippi Valley type(MVT) deposit.  相似文献   

5.
Metallogenic Mechanism of the Tianbaoshan Pb—Zn Deposit,Sichuan   总被引：8，自引：3，他引：5  
The Tianbaoshan Pb-Zn deposit in Sichuan Province,exhibiting open-space-filling and /or replacement textures,occurs as being of vine style in the Sinian(Late Proterozoic) carbonate rocks,and is simple in ore composition.A systematic study of lead isotope and rareearth elements reveals that the ore-forming materials were derived from multiple sources.The ultimate source of the sulfur in all stages in seawater sulfate but the reducing mechanisms are different,The carbon was derved from marine carbonate and organic matter,The ore-forming fluid,meteoric in origin,belongs to a Ca^2 -Mg^2 -Cl^--Hco3^- type of weak acidic to alkalic solutions with a salinity of about 5wt% NaCl.The ore was formed at the depth of about 1 km from 150 to 250℃ during the main stage of ore deposition.The heated meteoric water,after extracting ore materials from wall rocks,evolved into ore-forming solution with a low salinity, in which metals were trasported as chloride complexes such as PbCl,ZnCl and ZnCl.The metal-bearing solution moved upward along deep faults to low-pressure zones,where the metal ions reacted with reduced sulfur and were precipitated as sulfied minerals.The textures of the minerals were controlled by the rate at which the reduced sulfur was supplied.  相似文献   

6.
The Kengdenongshe deposit is a newly discovered large Au-Ag-Pb-Zn polymetallic deposit in the eastern Kunlun metallogenic belt, and the genetic relationship between Pb-Zn-rich ore bodies and Au-rich ore bodies in this deposit is controversial. Therefore, comparative studies of mineralization, alteration, and fluid inclusions in the two types of ore bodies were carried out with the statistical analysis of the correlation among ore-forming elements of Au, Ag, Pb and Zn. The results show that, from north to south, the mineralization changes gradually from Pb-Zn-rich to Au-rich with the wall-rock alteration from silicification-epidotization to baritization-marbleization-silicification. In addition, the structures of Pb-Zn-rich ores indicate a hydrothermal sedimentary origin with the late hydrothermal superposition, while those of Au-rich ores show features of hydrothermal origin. Besides, based on the study of fluid inclusions in this mining area, the ore-forming fluid of Pb-Zn-rich ores is low temperature (focus on 150-170°C) and low-medium salinity (1.74%-10.24% NaCleqv), while that of Au-rich ores displays low-medium temperature (manily 130-250°C) with low-medium salinity (0.35%-10.24% NaCleqv). Pb-Zn and Au-Ag show positive correlation (correlation coefficient r>0.25), but Au is poorly correlated with Pb and Zn (correlation coefficient r<0.15). However, to due to the late stage hydrothermal superimposition, Au is rather well correlated with Pb in high grade ores. In summary, there may exist two epochs of mineralization in the Kengdenongshe polymetallic deposit. The early one is Pb-Zn mineralization stage with characteristics of hydrothermal sedimentary origin, and the ore-forming fluid may be derived from the mixture of magmatic water and seawater. While the later one is Au mineralization stage, having characteristics of hydrothermal origin with subsequent hydrothermal superimpositions, and the ore-forming fluid is mainly derived from magmatic water that mixed with meteoric water. © 2018, Science Press. All right reserved.  相似文献   

7.
Auriferous quartz veins in the Bankuan gold deposit occur in the interlayer broken zone of the basal conglomerate of the Tietonggou Formation or at the unconformity between the Tietonggou Formation and the crystalline basement.The composition of fluid inclusions in the minerals indicates that the nature and composition of ore-forming hydrothermal solutions show a drastical change soon after the solutions reached the Tietonggou Formation from the crystalline basement,resulting in gold precipitation.So the Bankuan gold deposit can be assigned to the conglomerate stata-bound-type deposits.137 thermometric data are concentrated in the three ranges 400-340℃,330-220℃ and 180-160℃,representing three episodes of metalogenesis,Oxygen isotope studies demonstrate the evolution of ore-forming hydrothermal solutions from early metamorphic to late meteoric,Diversity of ore-forming materials dominated by deep-source material is supported by sulphur and lead isotope data.From the above discussions it may be concluded that the deposit formed by metamorphism induced as a result of Mesozoic northward intracontinental subduction along the Machaoying fault.  相似文献   

8.
The Tianqiao Pb-Zn ore deposit of Guizhou Province, China, is located in the mid-east of the Si-chuan-Yunnan-Guizhou Pb-Zn-Ag multi-metallic mineralization area, which is representative of the Pb-Zn ore de-posits in this area. It consists of three main orebodies, whose Pb+Zn reserves are more than 0.2 million ton. This paper analyzes the sulfur isotopic composition of these orebodies. The data show that the ore minerals (galena, sphalerite, pyrite) in these orebodies are enriched in heavy sulfur, with δ34SV-CDT values varying between 8.35‰ and 14.44‰, i.e. the δ34SV-CDT values of pyrite are between 12.81‰ and 14.44‰, the mean value is 13.40‰; the δ34SV-CDT values of sphalerite are range from 10.87‰ to 14.00‰, the mean value is 12.53‰; the δ34SV-CDT values of galena are range from 8.35‰ to 9.83‰, the mean value is 8.84‰, and they have the feature of δ34Spyrite>δ34Ssphalerite>δ34Sgalena, which indicates the sulfur isotope in ore-forming fluids has attained equilibrium. The δ34S V-CDT values of the deposit are close to those of sulfates from carbonate strata of different ages in the ore-field (15‰), which suggests that the sulfur in the ore-forming fluids should be derived from the thermo-chemical sulfate reduction of sulfates from the sedimentary strata.  相似文献   

9.
The Huize Pb-Zn deposits of Yunnan Province, located in the south-central part of the Sichuan-Yunnan-Guizhou (SYG) Pb-Zn multimetal mineralization district (MMD), are strictly controlled by fault zones. The sources of ore-forming fluid in the deposits have been debated for a long time. Calcite, a gangue mineral, has uniform C and O isotopes. The δ13CPDB and δ18OSMOW values vary respectively from -2.1×10-3 to -3.5×10-3 (mean -2.8×10-3) and 16.7×10-3-18.6×10-3 (mean 17.7×10-3). No obvious difference can be found in C and O isotopes among occurrences and elevations and even ore-bodies. Types of inclusions include those of pure liquid (L), liquid-rich gas-liquid (L V), and three-phase ones containing a daughter mineral (S L V) and immiscible CO2 with three-phases (VCO2 LCO2 LH2O). Their homogenization temperatures vary from 110 to 400 ℃, and two peaks are shown. (87Sr/86Sr)0 ratios of calcite in the deposits are higher than those in the mantle and Emeishan basalts, and slightly higher than those in the Baizuo Formation, which the Huize lead-zinc deposits are found in. All of the (87Sr/86Sr)0 are low relative to those in the basement rocks. Fractionation of Sr isotope did not occur in the ore-forming fluid during the precipitation of minerals. The results indicate that the ore-forming fluid is homogeneous and derived from the mixing of different fluids. Gas-liquid inclusions can be separated into two groups in 300-400 ℃ with a salinity of 5 %-6 % and 12 %-16 % NaCl respectively. However, the salinities of inclusions vary from 7 % to 23 % NaCl in 100-300 ℃, especially in 150-250 ℃. The formation pressures of faulted zones are (50-320)×105 Pa. The estimated pressures of the overlying rocks on the ore bodies are 574×105-640×105 Pa. The pressures of ore-forming processes would be 145×105 to 754×105 Pa. Therefore, pressure sharply reduced and boiling occurred when the ore-forming fluid flew into the fault zones. As a result, the ore-forming fluid was highly concentrated, and metallic minerals began to precipitate from the fluid on a great scale. The high-grade lead-zinc deposits were formed when the fluid was under saturation or over-saturation conditions.  相似文献   

10.
The Anqing Cu-Fe deposit is one of the representative large Cu-Fe deposits along the Yangtze River in Anhui province, with controversial metallogenic mechanism. Based on the ore-forming geological characteristics, this paper focus on the sulfur, carbon and oxygen isotopic compositions of the ores and surrounding rocks, and discuss the sources and evolution processes of the ore-forming materials. The Cu-Fe deposit occurs in the contact zone between the early Yanshanian Yueshan diorite and Triassic marble, with clear horizontal zonings in the skarns and ore bodies. The garnet skarn and thick massive magnetite ore body commonly occur within the external contact zone, which have clear boundaries with the surrounding rocks; whereas the diopside skarns with disseminated copper sulfide commonly occur within the internal contact zone and show gradual and transitional relations with the diorite. The δ34S values of the ores range from -6.5‰ to 10.6‰, and show a V-shaped trend from the diorite to the outer marble. This compositional variation indicates that most of the sulfur may come from magma, with involvement of some pre-Triassic clastic strata sulfur and Triassic marine sulfates in the later stage. The δ13C values of the gangue minerals range from -5.5‰ to 2.0‰, which decrease from the external contact zone to internal contact zone, indicating that the carbons of the ore-forming fluids may be mainly derived from magma, with some Triassic carbonate stratigraphic carbon involved. The marbles nearby the orebody show δ18O values lower than those of the Triassic strata, indicating that they have been remolded by the low δ18O magmatic hydrothermal fluids. The magnetite have some magma filling geological features and extremely low δ18O value, may be the result from the filling of the high temperature iron-rich fluids along the contact zone and fault. This study shows that the ore-magma filling type and hydrothermal-metasomatic type ore bodies coexist in the Anqing Fe-Cu deposit. The immiscibility between iron oxide and silicate melt occurred in magma chamber, which resulted in the formation of iron-rich fluid. The fluid migrated upward and eventually precipitated in a favorable tectonic area or contact zone, and the magnetite ore bodies were formed in the outer contact zone. By the later fluid mixing, filling metasomasis, and water-rock reaction between the differentiated hydrothermal solutions and diorite, the copper ore bodies and the copper-bearing altered diorite were formed in the internal contact zone. © 2018, Science Press. All right reserved.  相似文献   

11.
The Dongsheng sandstone-type uranium deposit is one of the large-sized sandstone-type uranium deposits discovered in the northern part of the Ordos Basin of China in recent years. Geochemical characteristics of the Dongsheng uranium deposit are significantly different from those of the typical interlayered oxidized sandstone-type uranium ore deposits in the region of Middle Asia. Fluid inclusion studies of the uranium deposit showed that the uranium ore-forming temperatures are within the range of 150–160℃. Their 3He/4He ratios are within the range of 0.02–1.00 R/Ra, about 5–40 times those of the crust. Their 40Ar/36Ar ratios vary from 584 to 1243, much higher than the values of atmospheric argon. The δ18OH2O and δD values of fluid inclusions from the uranium deposit are -3.0‰– -8.75‰ and -55.8‰– -71.3‰, respectively, reflecting the characteristics of mixed fluid of meteoric water and magmatic water. The δ18OH2O and δD values of kaolinite layer at the bottom of the uranium ore deposit are 6.1‰ and -77‰, respectively, showing the characteristics of magmatic water. The δ13CV-PDB and δ18OH2O values of calcite veins in uranium ores are -8.0‰ and 5.76‰, respectively, showing the characteristics of mantle source. Geochemical characteristics of fluid inclusions indicated that the ore-formation fluid for the Dongsheng uranium deposit was a mixed fluid of meteoric water and deep-source fluid from the crust. It was proposed that the Jurassic-Cretaceous U-rich metamorphic rocks and granites widespread in the northern uplift area of the Ordos Basin had been weathered and denudated and the ore-forming elements, mainly uranium, were transported by meteoric waters to the Dongsheng region, where uranium ores were formed. Tectonothermal events and magmatic activities in the Ordos Basin during the Mesozoic made fluids in the deep interior and oil/gas at shallow levels upwarp along the fault zone and activated fractures, filling into U-bearing clastic sandstones, thus providing necessary energy for the formation of uranium ores.  相似文献   

12.
The Southern Great Xing'an Range(SGXR) hosts a number of Early Cretaceous Sn and associated metal deposits, which can be divided into three principal types according to their geological characteristics: skarn type deposits, porphyry type deposits and hydrothermal vein type deposits. Fluid inclusion assemblages of different types of deposits are quite different, which represent the complexities of metallogenic process and formation mechanism. CH_4 and CO_2 have been detected in fluid inclusions from some of deposits, indicating that the ore-forming fluids are affected by materials of Permian strata. Hydrogen and oxygen isotope data from ore minerals and associated gangue minerals indicate that the initial ore fluids were dominated by magmatic waters, some of which had clearly exchanged oxygen with wall rocks during their passage through the strata. The narrow range for the δ~(34)S values presumably reflects the corresponding uniformity of the ore forming fluids, and these δ~(34)S values have been interpreted to reflect magmatic sources for the sulfur. The comparation between lead isotope ratios of ore minerals and different geological units' also reveals that deeply seated magma has been a significant source of lead in the ores.  相似文献   

13.
The Dongjun Pb-Zn-Ag deposit in the northern part of the Great Xing’an Range (NE China) consists of quartz-sulfide vein-type and breccia-type mineralization, related to granite porphyry. Hydrothermal alteration is well-developed and includes potassic-silicic-sericitic alteration, phyllic alteration and propylitic alteration. Three stages of mineralization are recognized on the basis of field evidence and petrographic observation, demarcated by assemblages of quartz-pyrite-arsenopyrite (early stage), quartz-polymetallic sulfide (intermediate stage) and quartz-carbonate-pyrite (late stage). Zircon LA-ICP-MS U-Pb dating indicates that the granite porphyry was emplaced at 146.7 ± 1.2 Ma (Late Jurassic). Microthermometry and laser Raman spectroscopy shows that ore minerals were deposited in conditions of intermediate temperatures (175–359°C), low salinity (0.5–9.3 wt% NaCl eqv.) and low density (0.60–0.91 g/cm3). Ore-forming fluids were derived largely from magmatic hydrothermal processes, with late-stage addition of meteoric water, belonging to a H2O-NaCl-CO2 ± CH4 system. The δ34SV-CDT values range from 0.75‰ to 4.70‰. The 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb values of the ore minerals are in the ranges of 18.240–18.371, 15.542–15.570, and 38.100–38.178, respectively. Data for the S and Pb isotopic systems indicate that the ore-forming metals and sulfur were derived from Mesozoic magma. Based on the geological characteristics and geochemical signatures documented in this study, we conclude that the Dongjun deposit is a mesothermal magmatic hydrothermal vein-type Pb-Zn-Ag deposit controlled by fractures and related to granite porphyry, in response to Late Jurassic tectonic–magmatic–hydrothermal activity. We further conclude that fluid immiscibility, fluid mixing and fluid-rock interactions were the dominant mechanisms for deposition of the ore-forming materials.  相似文献   

14.
The Weiquan Ag-polymetallic deposit is located on the southern margin of the Central Asian Orogenic Belt and in the western segment of the Aqishan-Yamansu arc belt in East Tianshan,northwestern China. Its orebodies, controlled by faults, occur in the lower Carboniferous volcanosedimentary rocks of the Yamansu Formation as irregular veins and lenses. Four stages of mineralization have been recognized on the basis of mineral assemblages, ore fabrics, and crosscutting relationships among the ore veins. Stage I is the skarn stage(garnet + pyroxene), Stage Ⅱ is the retrograde alteration stage(epidote + chlorite + magnetite ± hematite 士 actinolite ± quartz),Stage Ⅲ is the sulfide stage(Ag and Bi minerals + pyrite + chalcopyrite + galena + sphalerite + quartz ± calcite ± tetrahedrite),and Stage IV is the carbonate stage(quartz + calcite ± pyrite). Skarnization,silicification, carbonatization,epidotization,chloritization, sericitization, and actinolitization are the principal types of hydrothermal alteration. LAICP-MS U-Pb dating yielded ages of 326.5±4.5 and 298.5±1.5 Ma for zircons from the tuff and diorite porphyry, respectively. Given that the tuff is wall rock and that the orebodies are cut by a late diorite porphyry dike, the ages of the tuff and the diorite porphyry provide lower and upper time limits on the age of ore formation. The δ~(13)C values of the calcite samples range from-2.5‰ to 2.3‰, the δ~(18)O_(H2 O) and δD_(VSMOW) values of the sulfide stage(Stage Ⅲ) vary from 1.1‰ to 5.2‰ and-111.7‰ to-66.1‰, respectively,and the δ~(13)C, δ~(18)O_(H2 O) and δD_(V-SMOW) values of calcite in one Stage IV sample are 1.5‰,-0.3‰, and-115.6‰, respectively. Carbon, hydrogen, and oxygen isotopic compositions indicate that the ore-forming fluids evolved gradually from magmatic to meteoric sources. The δ~(34)S_(V-CDT) values of the sulfides have a large range from-6.9‰ to 1.4‰, with an average of-2.2‰, indicating a magmatic source, possibly with sedimentary contributions. The ~(206)Pb/~(204)Pb, ~(207)Pb/~(204)Pb, and ~(208)Pb/~(204)Pb ratios of the sulfides are 17.9848-18.2785,15.5188-15.6536, and 37.8125-38.4650, respectively, and one whole-rock sample at Weiquan yields~(206)Pb/~(204)Pb,~(207)Pb/~(204)Pb, and ~(208)Pb/~(204)Pb ratios of 18.2060, 15.5674, and 38.0511,respectively. Lead isotopic systems suggest that the ore-forming materials of the Weiquan deposit were derived from a mixed source involving mantle and crustal components. Based on geological features, zircon U-Pb dating, and C-H-OS-Pb isotopic data, it can be concluded that the Weiquan polymetallic deposit is a skarn type that formed in a tectonic setting spanning a period from subduction to post-collision. The ore materials were sourced from magmatic ore-forming fluids that mixed with components derived from host rocks during their ascent, and a gradual mixing with meteoric water took place in the later stages.  相似文献   

15.
The Nage Cu-Pb deposit,a new found ore deposit in the southeast Guizhou province,southwest China,is located on the southwestern margin of the Jiangnan Orogenic Belt.Ore bodies are hosted in slate and phyllite of Neoproterozoic Jialu and Wuye Formations,and are structurally controlled by EW-trending fault.It contains Cu and Pb metals about 0.12 million tonnes with grades of 0.2 wt% to 3.4 wt% Cu and 1.1 wt% to 9.27 wt% Pb.Massive and disseminated Cu-Pb ores from the Nage deposit occur as either veinlets or disseminations in silicified rocks.The ore minerals include chalcopyrite,galena and pyrite,and gangue minerals are quartz,sericite and chlorite.The H-O isotopic compositions of quartz,S-Cu-Pb isotopic compositions of sulfide minerals,Pb isotopic compositions of whole rocks and ores have been analyzed to trace the sources of ore-forming fluids and metals for the Nage Cu-Pb deposit.The δ65CuNBS values of chalcopyrite range from-0.09% to +0.33‰,similar to basic igneous rocks and chalcopyrite from magmatic deposits.δ65CuNBS values of chalcopyrite from the early,middle and final mineralization stages show an increasing trend due to63Cu prior migrated in gas phase when fluids exsolution from magma.δ34SCDT values of sulfide minerals range from 2.7‰ to +2.8‰,similar to mantle-derived sulfur(0±3‰).The positive correlation between δ65CuNBS and δ34SCDT values of chalcopyrite indicates that a common source of copper metal and sulfur from magma.δDH2OSMOW and δ18OH2O-SMOW values of water in fluid inclusions of quartz range from 60.7‰ to 44.4‰ and +7.9‰ to +9.0‰(T=260°C),respectively and fall in the field for magmatic and metamorphic waters,implicating that mixed sources for H2O in hydrothermal fluids.Ores and sulfide minerals have a small range of Pb isotopic compositions(208Pb/204Pb=38.152 to 38.384,207Pb/204Pb=15.656 to 17.708 and 206Pb/204Pb=17.991 to 18.049) that are close to orogenic belt and upper crust Pb evolution curve,and similar to Neoproterozoic host rocks(208Pb/204Pb=38.201 to 38.6373,207Pb/204Pb=15.648 to 15.673 and 206Pb/204Pb=17.820 to 18.258),but higher than diabase(208Pb/204Pb=37.830 to 38.012,207Pb/204Pb=15.620 to 15.635 and206Pb/204Pb=17.808 to 17.902).These results imply that the Pb metal originated mainly from host rocks.The H-O-S-Cu-Pb isotopes tegather with geology,indicating that the ore genesis of the Nage Cu-Pb deposit is post-magmatic hydrothermal type.  相似文献   

16.
The Jinshachang lead–zinc deposit is mainly hosted in the Upper Neoproterozoic carbonate rocks of the Dengying Group and located in the Sichuan–Yunnan–Guizhou(SYG) Pb–Zn–Ag multimetal mineralization area in China.Sulfides minerals including sphalerite,galena and pyrite postdate or coprecipitate with gangue mainly consisting of fluorite,quartz,and barite,making this deposit distinct from most lead–zinc deposits in the SYG.This deposit is controlled by tectonic structures,and most mineralization is located along or near faults zones.Emeishan basalts near the ore district might have contributed to the formation of orebodies.The δ34S values of sphalerite,galena,pyrite and barite were estimated to be 3.6‰–13.4‰,3.7‰–9.0‰,6.4‰ to 29.2‰ and 32.1‰–34.7‰,respectively.In view of the similar δ34S values of barite and sulfates being from the Cambrian strata,the sulfur of barite was likely derived from the Cambrian strata.The homogenization temperatures(T ≈ 134–383°C) of fluid inclusions were not suitable for reducing bacteria,therefore,the bacterial sulfate reduction could not have been an efficient path to generate reduced sulfur in this district.Although thermochemical sulfate reduction process had contributed to the production of reduced sulfur,it was not the main mechanism.Considering other aspects,it can be suggested that sulfur of sulfides should have been derived from magmatic activities.The δ34S values of sphalerite were found to be higher than those of coexisting galena.The equilibrium temperatures calculated by using the sulfur isotopic composition of mineral pairs matched well with the homogenization temperature of fluid inclusions,suggesting that the sulfur isotopic composition in ore-forming fluids had reached a partial equilibrium.  相似文献   

17.
Located in Alxa Zuoqi (Left Banner) of Inner Mongolia, China, the Zhulazhaga gold deposit is the first largescale gold deposit that was found in the middle-upper Proterozoic strata along the north margin of the North China craton in recent years. It was discovered by the No. l Geophysical and Geochemical Exploration Party of Inner Mongolia as a result of prospecting a geochemical anomaly. By now, over 50 tonnes of gold has been defined, with an average Au grade of 4 g/t. The ore bodies occur in the first lithological unit of the Mesoproterozoic Zhulazhagamaodao Formation (MZF), which is composed mainly of epimetamorphic sandstone and siltstone and partly of volcanic rocks. With high concentration of gold,the first lithological unit of the MZF became the source bed for the late-stage ore formation. Controlled by the interstratal fracture zones, the ore bodies mostly appear along the bedding with occurrence similar to that of the strata. The primitiveore types are predominantly the altered rock type with minor ore belonging to the quartz veins type. There are also some oxidized ore near the surface. The metallic minerals are composed mainly of pyrite, pyrrhotite and arsenopyrite with minor chalcopyrite, galena and limonite. Most gold minerals appear as native gold and electrum. Hydrothermal alterations associated with the ore formation are actinolitization, silicatization, sulfidation and carbonation. A total of 100 two-phase H2O-rich and 7 three-phase daughter crystal-beating inclusions were measured in seven goldbearing quartz samples from the Zhulazhaga gold deposit. The homogenization temperatures of the two-phase H2O-rich inclusions range from 155 to 401℃, with an average temperature of 284℃ and bimodal distributions from 240 to 260℃ and 300 to 320℃ respectively. The salinities of the two-phase H2O-rich inclusions vary from 9.22wt% to 24.30wt% NaCl eqniv, with a mode between 23 wt% and 24wt% NaC1 equiv. Comparatively, the homogenization temperatures of the threephase daughter crystal-beating inclusions vary from 210 to 435℃ and the salinities from 29.13wt% to 32.62wt% NaCl equiv. It indicates that the ore-forming fluid is meso-hypothermal and characterized by high salinity, which is apparently different from the metamorphic origin with low salinity. It suggests a magmatic origin of the gold-bearing fluid. The δ^18O values of quartz from auriferous veins range from 11.9 to 16.3 per mil, and the calculated δ^18OH2O values in equilibrium with quartz vary from 1.06 to 9.60 per mil, which fall between the values of meteoric water and magmatic water. It reflects that the ore-forming fluid may be the product of mixing of meteoric water and magmatic water.Based on geological and geochemical studies of the Zhulazhaga gold deposit, it is supposed that the volcanism in the Mesoproterozoic might make gold pre-concentrate in the strata. The extensive and intensive Hercynian tectono-magmatic activity not only brought along a large number of ore-forming materials, but also made the gold from the strata rework. It can be concluded that the ore bodies were mainly formed in late hydrothermal reworking stage. Compared with typical gold deposits associated with epimetamorphic clastic rocks, the Zhulazhaga deposit has similar features in occurrence of ore bodies, ore-controlling structure, wall-rock alterations and mineral assemblages. Therefore, the Zhulazhaga gold deposit belongs to the epimetamorphic clastic rock type.  相似文献   

18.
In this paper the authors present the REE concentrations and Sr and Nd isotopic compositions of fluorites from the Bailashui tin deposit of the Furong ore field, southern Hunan Province. The results showed that the total amount of REE in fluorites is usually low, ranging from 0.705 to 8.785 μg/g with the chondrite-normalized REE distribution patterns similar to those of the Qitianling granites in the study area, characterized by LREE-enrichment patterns with pronounced negative Eu anomalies. The fluorites vary in Sr isotopic composition within the range of 0.7083-0.7091, the values are lower than those of the granites and higher than those of the host carbonate rocks in this area. The εNd（t） values of fluorites vary between -9.4 and ＋10.3, revealing that both the crust- and mantle-source materials were involved in the ore-forming hydrothermal fluids. Combined with previous studies on this ore deposit, the Bailashui tin deposit is temporally and spatially closely related with granitic magmatism in this area. The hydrothermal fluorites are the product of fluid/rock interactions between granitic magmatic hydrothermal fluid and marine carbonate rocks. The REE and F in the ore-forming fluid were derived from the granites, whereas Sr in the ore-forming fluid came mainly from the granitic magmatic hydrothermal fluid and marine carbonate rocks, although variations in Sr isotopic composition cannot be explained by a simple mixture of these two end-members. Evidence demonstrated that the ore-forming fluids are of crustal-mantle mixing origin, but that the fluids were probably incompletely homogenized and this may be caused by inhomogeneous mixing of the fluids of different sources.  相似文献   

19.
Trace elements and rare earth elements (REE) of the sulfide minerals were determined by inductively-coupled plasma mass spectrometry. The results indicate that V, Cu, Sn, Ga, Cd, In, and Se are concentrated in sphalerite, Sb, As, Ge, and Tl are concentrated in galena, and almost all trace elements in pyrite are low. The Ga and Cd contents in the light-yellow sphalerites are higher than that in the brown and the black sphalerites. The contents of Ge, Tl, In, and Se in brown sphalerites are higher than that in light-yellow sphalerites and black sphalerites. It shows that REE concentrations are higher in pyrite than in sphalerite, and galena. In sphalerites, the REE concentration decreases from light-yellow sphalerites, brown sphalerites, to black sphalerites. The ratios of Ga/In are more than 10, and Co/Ni are less than 1 in the studied sphalerites and pyrites, respectively, indicating that the genesis of the Tianqiao Pb–Zn ore deposit might belong to sedimentary-reformed genesis associated with hydrothermal genesis. The relationship between LnGa and LnIn in sphalerite, and between LnBi and LnSb in galena, indicates that the Tianqiao Pb–Zn ore deposit might belong to sedimentary-reformed genesis. Based on the chondrite-normalized REE patterns, δEu is a negative anomaly (0.13–0.88), and δCe does not show obvious anomaly (0.88–1.31); all the samples have low total REE concentrations (<3 ppm) and a wide range of light rare earth element/high rare earth element ratios (1.12–12.35). These results indicate that the ore-forming fluids occur under a reducing environment. Comparison REE compositions and parameters of sphalerites, galenas, pyrites, ores, altered dolostone rocks, strata carbonates, and the pyrite from Lower Carboniferous Datang Formation showed that the ore-forming fluids might come from polycomponent systems, that is, different chronostratigraphic units could make an important contribution to the ore-forming fluids. Combined with the tectonic setting and previous isotopic geochemistry evidence, we conclude that the ore-deposit genesis is hydrothermal, sedimentary reformed, with multisources characteristics of ore-forming fluids.  相似文献   

20.
The Yinkeng orefield in Yudu County, Jiangxi Province, SE China, is a zone of concentrated Au-Ag-Pb-Zn-Cu-Mn polymetallic ores. Based on summing up basic geology and ore geology of the orefield, the polymetallic deposits in the orefield have been divided into seven major substyles according to their occurring positions and control factors. The ore-forming fluid inclusion styles in the orefield include those of two-phase fluid, liquid CO2-bearing three-phase and daughter mineral-bearing multi-phase. The homogenization temperatures range from 382o to 122oC, falling into five clusters of 370o to 390o, 300o to 360o, 230o to 300o, 210o to 290o and 120o to 200o, and the clusters of 300o to 360o, 230o to 300o and 120o to 200o are three major mineralization stages, with fluid salinity peaks from 4.14% to 7.31%, 2.07% to 7.31% and 0.53% to 3.90%, respectively. The ore-forming fluids are mainly type of NaCl-H2O with medium to high density(0.74–1.02 g/cm3), or CO2-bearing NaCl-H2O with medium to low density(0.18–0.79 g/cm3). The fluid salinity and density both show a decline tendency with decreasing temperature. According to the measurement and calculation of Hand O-isotopic compositions in the quartz of the quartz-sulfide veins, δDV-SMOW of the ore-forming fluid is from-84‰ to-54‰, and δ18OV-SMOW of that is from 6.75‰ to 9.21‰, indicating a magmatic fluid. The δ34SV-CDT of sulfides in the ores fall into two groups, one is from-4.4‰ to 2.2‰ with average of-1.42‰, and the other from 18.8‰ to 21.6‰ with average of 19.8‰. The S-isotopic data shows one peak at-4.4‰ to 2.2‰(meaning-1.42‰) suggesting a simple magmatic sulfur source. The ore Pbisotopic ratios are 206Pb/204Pb from 17.817 to 17.983, 207Pb/204Pb from 15.470 to 15.620 and 208Pb/204Pb from 38.072 to 38.481, indicating characteristics of mantle-derived lead. The data show that the major ore deposits in the orefield have a magmatic-hydrothermal genesis and that the SHRIMP zircon age of the granodiorite porphyry, closely related to the mineralization, is 151.2±4.2 Ma(MSWD = 1.3), which can represent the formation ages of the ores and intrusion rocks. The study aids understanding of the ore-forming processes of the major metallic ore deposits in the orefield.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号