共查询到20条相似文献，搜索用时 375 毫秒
1.
We present a uniform asymptotic solution (UAS) for a displacement discontinuity (DD) that lies within the middle layer of a three‐layer elastic medium in which relative shear deformation between parallel interfaces is controlled by linear springs. The DD is assumed to be normal to the two interfaces between the elastic media. Using the Fourier transform method we construct a leading term in the asymptotic expansion for the spectral coefficient functions for a DD in a three‐layer‐spring medium. Although a closed‐form solution will require a solution in terms of an infinite series, we demonstrate how this UAS can be used to construct highly efficient and accurate solutions even in the case in which the DD actually touches the interface. We compare the results using the Green's function UAS solution for a crack crossing a soft interface with results obtained using a multi‐layer boundary element method. We also present results from an implementation of the UAS Green's function approach in a pseudo‐3D hydraulic fracturing simulator to analyze the effect of interface shear deformation on the fracture propagation process. These results are compared with field measurements. Copyright © 2008 John Wiley & Sons, Ltd. 相似文献
2.
3.
Hydraulic fracturing is the method of choice to enhance reservoir permeability and well efficiency for extraction of shale gas. Multi‐stranded non‐planar hydraulic fractures are often observed in stimulation sites. Non‐planar fractures propagating from wellbores inclined from the direction of maximum horizontal stress have also been reported. The pressure required to propagate non‐planar fractures is in general higher than in the case of planar fractures. Current computational methods for the simulation of hydraulic fractures generally assume single, symmetric, and planar crack geometries. In order to better understand hydraulic fracturing in complex‐layered naturally fractured reservoirs, fully 3D models need to be developed. In this paper, we present simulations of 3D non‐planar fracture propagation using an adaptive generalized FEM. This method greatly facilitates the discretization of complex 3D fractures, as finite element faces are not required to fit the crack surfaces. A solution strategy for fully automatic propagation of arbitrary 3D cracks is presented. The fracture surface on which pressure is applied is also automatically updated at each step. An efficient technique to numerically integrate boundary conditions on crack surfaces is also proposed and implemented. Strongly graded localized refinement and analytical asymptotic expansions are used as enrichment functions in the neighborhood of fracture fronts to increase the computational accuracy and efficiency of the method. Stress intensity factors with pressure on crack faces are extracted using the contour integral method. Various non‐planar crack geometries are investigated to demonstrate the robustness and flexibility of the proposed simulation methodology. Copyright © 2014 John Wiley & Sons, Ltd. 相似文献
4.
Numerical modeling of hydraulic fracture propagation,closure and reopening using XFEM with application to in‐situ stress estimation 
下载免费PDF全文
下载免费PDF全文 In this paper, a fully coupled model is developed for numerical modeling of hydraulic fracturing in partially saturated weak porous formations using the extended finite element method, which provides an effective means to simulate the coupled hydro‐mechanical processes occurring during hydraulic fracturing. The developed model is for short fractures where plane strain assumptions are valid. The propagation of the hydraulic fracture is governed by the cohesive crack model, which accounts for crack closure and reopening. The developed model allows for fluid flow within the open part of the crack and crack face contact resulting from fracture closure. To prevent the unphysical crack face interpenetration during the closing mode, the crack face contact or self‐contact condition is enforced using the penalty method. Along the open part of the crack, the leakage flux through the crack faces is obtained directly as a part of the solution without introducing any simplifying assumption. If the crack undergoes the closing mode, zero leakage flux condition is imposed along the contact zone. An application of the developed model is shown in numerical modeling of pump‐in/shut‐in test. It is illustrated that the developed model is able to capture the salient features bottomhole pressure/time records exhibit and can extract the confining stress perpendicular to the direction of the hydraulic fracture propagation from the fracture closure pressure. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
5.
随着扩展有限元理论的深入研究,利用扩展有限元方法模拟水力压裂具有了一定的可操作性。相比于常规有限元方法,XFEM方法具有计算结果精度高和计算量小的优点。但是,如何模拟射孔孔眼、如何模拟流体与岩石相互作用以及分析水力裂缝的扩展规律仍然是难题。以研究水力压裂裂缝扩展规律为目的,建立了岩石多孔介质应力平衡方程、流体渗流连续性方程和边界条件。通过有限元离散化方法对耦合方程矩阵进行处理。通过富集函数定义初始裂缝（射孔孔眼）,选择最大主应力及损伤变量D分别作为裂缝起裂和扩展判定准则,利用水平集方法模拟水力裂缝扩展过程。数值模拟结果显示：增加射孔方位角、压裂液排量和减小水平地应力差,起裂压力上升;黏度对起裂压力无明显影响。增加射孔方位角、压裂液排量、黏度和减小水平地应力差值有助于裂缝宽度的增加。增加水平地应力差值、压裂液排量和减小射孔方位角以及压裂液黏度有助于裂缝长度增加,反之亦然。基于ABAQUS的水力裂缝扩展有限元法可对不同井型和诸多储层物性参数及压裂施工参数进行分析,且裂缝形态逼真,裂缝面凹凸程度清晰,结果准确。此研究可作为一种简便有效研究水力压裂裂缝扩展规律的方法为油田水力压裂设计与施工提供参考与依据。 相似文献
6.
危岩是三峡库区典型的地质灾害类型之一,而主控结构面受荷断裂扩展是危岩发育成灾的关键核心。将危岩主控结构面类比为宏观裂纹,利用扩展有限元法在模拟裂纹扩展方面的优势,基于考虑裂纹面水压力作用的虚功原理推导出了采用扩展有限元法分析水力劈裂问题的控制方程,给出了危岩主控结构面水力劈裂问题的扩展有限元实现方法,对重庆万州太白岩危岩主控结构面的水力劈裂进行了数值模拟分析。计算结果表明：暴雨是威胁危岩稳定性的最敏感因素,随着裂隙水压力上升,裂端拉应力会急剧升高,危岩的稳定性降低;I型裂纹扩展是危岩主要的结构面扩展形式,结构面一旦发生开裂,将处于非稳定扩展状态。 相似文献
7.
This paper presents a boundary element method (BEM) procedure for a linear elastic fracture mechanics analysis in two‐dimensional anisotropic bimaterials. In this formulation, a displacement integral equation is only collocated on the uncracked boundary, and a traction integral equation is only collocated on one side of the crack surface. A fundamental solution (Green's function) for anisotropic bimaterials is also derived and implemented into the boundary integral formulation so that except for the interfacial crack part, the discretization along the interface can be avoided. A special crack‐tip element is introduced to capture the exact crack‐tip behavior. A computer program using FORTRAN has been developed to effectively calculate the stress intensity factors of an anisotropic bimaterial. This BEM program has been verified to have a good accuracy with previous studies. In addition, a central cracked bimaterial Brazilian specimen constituting cement and gypsum is prepared to conduct the Brazilian test under diametral loading. The result shows that the numerical analysis can predict relatively well the direction of crack initiation and the path of crack propagation. Copyright © 2007 John Wiley & Sons, Ltd. 相似文献
8.
A numerical procedure is described for the analysis of the vertical deformation and the stress distribution of the strip footings
on layered soil media. Three layers of soil with different stiffness are considered with the middle soil layer the thinnest
and most stiff layer. The soil media is discretized and using the theory of elasticity, the governing differential equations
are obtained in terms of vertical and horizontal displacements. These equations along with appropriate boundary and continuity
conditions are solved by using the finite difference method. The vertical and horizontal displacements, strains and stresses
are found at various nodes in the soil media. Parametric studies are carried out to study the effect of the placement depth
of the middle soil layer, the relative ratios of the moduli of deformation of the soil layers on the vertical displacement
of the footing and the vertical stress distribution. These studies reveal that the middle thin but very stiff layer acts like
a plate and redistributes the stresses on the lower soft soil layer uniformly. The displacement on the top and bottom of the
middle soil layer is almost the same showing that the compression of the middle layer is negligible as it is very stiff. 相似文献
9.
A fully coupled element‐free Galerkin model for hydro‐mechanical analysis of advancement of fluid‐driven fractures in porous media 下载免费PDF全文
下载免费PDF全文 Hydraulic fracturing (HF) of underground formations has widely been used in different fields of engineering. Despite the technological advances in techniques of in situ HF, the industry uses semi‐analytical tools to design HF treatment. This is due to the complex interaction among various mechanisms involved in this process, so that for thorough simulations of HF operations a fully coupled numerical model is required. In this study, using element‐free Galerkin (EFG) mesh‐less method, a new formulation for numerical modeling of hydraulic fracture propagation in porous media is developed. This numerical approach, which is based on the simultaneous solution of equilibrium and continuity equations, considers the hydro‐mechanical coupling between the crack and its surrounding porous medium. Therefore, the developed EFG model is capable of simulating fluid leak‐off and fluid lag phenomena. To create the discrete equation system, the Galerkin technique is applied, and the essential boundary conditions are imposed via penalty method. Then, the resultant constrained integral equations are discretized in space using EFG shape functions. For temporal discretization, a fully implicit scheme is employed. The final set of algebraic equations that forms a non‐linear equation system is solved using the direct iterative procedure. Modeling of cracks is performed on the basis of linear elastic fracture mechanics, and for this purpose, the so‐called diffraction method is employed. For verification of the model, a number of problems are solved. According to the obtained results, the developed EFG computer program can successfully be applied for simulating the complex process of hydraulic fracture propagation in porous media. Copyright © 2016 John Wiley & Sons, Ltd. 相似文献
10.
岩体中普遍存在着断层﹑节理和裂隙等结构面,这些结构面的存在和发展对岩体的整体强度﹑变形及稳定性有极大的影响。因此,研究岩体中原生结构面的萌生﹑发展以及贯通演化过程对评估岩体工程安全性和可靠性具有非常重要的理论与现实意义。扩展有限元法（XFEM）作为一种求解不连续问题的有效数值方法,模拟裂隙时独立于网格,因此,在模拟岩体裂隙扩展﹑水力劈裂等方面具有独特优势。针对扩展有限元法的基本理论及其在岩体裂隙扩展模拟中的应用展开了研究,建立了扩展有限元法求解岩体裂隙摩擦接触、岩体裂隙破坏等问题的数值模型,并将计算模型应用于岩质边坡稳定性分析和重力坝坝基断裂破坏等工程问题。 相似文献
11.
水力压裂作为一种主要的地热能开采手段,其压裂效果除与岩体基本物理力学性质有关外,还与裂隙分布、地应力状态、压裂工程参数等密切相关.为了探究以上因素对水力压裂过程中裂缝扩展行为的影响,以冀中坳陷碳酸盐岩储层岩体为研究对象,基于扩展有限元法,建立裂缝扩展流固耦合模型,分析了水平应力差、射孔方位角、注入液排量和压裂液黏度等参数对裂缝扩展行为的影响.结果表明:单裂缝扩展时,射孔方位角越小、注入量越大、越有利于裂缝扩展;双裂缝扩展时,水平应力差增大,裂缝偏转程度变小;水力裂缝与天然裂缝相交时,较小水平应力差有利于天然裂缝开启. 相似文献
12.
The intersection of natural fractures with hydraulic fractures results in formation of complex fracture networks, including non-planar fractures or multi-stranded fractures. On one hand, opening of these natural fractures improves productivity of the formation; on the other hand, coalescence of these fractures into a hydraulic fracture makes pressure analysis and prediction of fracture growth very complicated. Overall, interactions between natural fractures and hydraulic fractures pose more challenges in the fracturing design and its execution. Investigation and understanding of their interaction are crucial in achieving successful fracture treatments in formations with pre-existing natural fracture network. In this paper, we will review the numerical works that have been done in the last decade to model opening of natural fractures during hydraulic fracturing, focusing especially on mechanical models that address propagation of hydraulic fractures in naturally fractures reservoirs. Linear elastic fracture mechanics, cohesive element methods and continuum damage mechanics techniques utilized to understand interaction of hydraulic fractures with natural fractures are discussed here based on their capability to reproduce experimental results and field observations. 相似文献
13.
14.
Abolfazl Moradi Behzad Tokhmechi Vamegh Rasouli Mohammad Fatehi Marji 《Geotechnical and Geological Engineering》2017,35(3):1035-1050
Production of hydrocarbons from shale formations has been made possible mainly due to hydraulic fracture (HF) technology. It increases the permeability of reservoir rocks around a well by connecting fractures and improving conductivity. HF behavior especially in presence of natural fractures have recently given much attention in studies. This paper investigates HF propagation and its associated parameters in various conditions. A higher order displacement discontinuity method is used to achieve higher accuracy in the results. First, behavior of crack opening displacement (COD) of an HF i.e. HF width in various conditions is studied. COD is a key parameter in determination of an HF operation success. It is proportional to production rate of oil and gas wells and provides a path for proppant entrance into the fractures. An equation considering many important parameters, based on numerous numerical modellings of various mechanical and geometrical effects on COD is proposed with coefficient of determination and standard error of 94.35% and 4.37 × 10?4 respectively. The next part of the paper studies the HF propagation in a naturally fractured reservoir. These natural fractures alter the stress fields and hence affect the propagation of a hydraulic fracture. In fact, it is shown that in certain orientations of hydraulic fractures and natural fractures, the effect of natural fractures disappear or completely changes propagation path. Using a combination of several interaction criteria, a new modeling of HFs and NFs interaction is presented. The modellings showed that spacing and angle of intersection can significantly affect HFs propagation. The results of COD and HF propagation in presence of natural fractures may be considered in HG design and primary orientation of perforated fractures. 相似文献
15.
We present an algorithm to simulate curvilinear hydraulic fractures in plane strain and axisymmetry. We restrict our attention to sharp fractures propagating in an isotropic, linear elastic medium and driven by the injection of a laminar, Newtonian fluid governed by lubrication theory, and we require the existence of a finite lag region between the fluid front and the crack tip. The key novelty of our approach is in how we discretize the evolving crack and fluid domains: we utilize universal meshes (UMs), a technique to create conforming triangulations of a problem domain by only perturbing nodes of a universal background mesh in the vicinity of the boundary. In this way, we construct meshes, which conform to the crack and to the fluid front. This allows us to build standard piecewise linear finite element spaces and to monolithically solve the quasistatic hydraulic fracture problem for the displacement field in the rock and the pressure in the fluid. We demonstrate the performance of our algorithms through three examples: a convergence study in plane strain, a comparison with experiments in axisymmetry, and a novel case of a fracture in a narrow pay zone. 相似文献
16.
非连续面发育是非常规油气储层的显著地质特征之一,水力裂缝能否穿越非连续面扩展会关系到压裂的改造效果。为研究水力裂缝穿越非连续面扩展时断裂过程区（fracture process zone,简称FPZ）发育特征,采用自主设计的可视化压裂试验装置对含预制摩擦界面的砂岩平板试件开展水力压裂试验。基于数字图像相关法实时监测了水力裂缝正交穿越界面扩展过程中的位移及应变场特征。试验结果表明,水力裂缝穿越界面扩展之前,断裂过程区已经开始跨越界面发育;裂缝能否穿越界面扩展在FPZ的初始发育阶段已经注定,不受FPZ内应力软化过程影响。基于Renshaw-Pollard准则建立了考虑FPZ边界范围的裂缝穿越非连续面扩展准则,并通过前人及文中试验数据进行了可靠性验证。相比而言,改进准则更准确地考虑了裂缝前端线弹性断裂力学的适用范围。研究发现FPZ长宽比对裂缝穿越界面扩展准则有显著影响,相同条件下,FPZ长宽比越大,裂缝正交穿越界面扩展所需要的摩擦系数下限值越小。 相似文献
17.
水力压裂作为煤层强化增透技术的一种,其应力演化特征及裂隙形态与扩展范围的判断尤为重要。采用离散元数值方法,以导向压裂为背景,建立水力压裂流固耦合模型;通过应力路径、裂纹热点图等手段,探究水力压裂过程中压裂排量、泊松比、天然裂隙密度对应力演化和裂隙演化的影响及其细观规律。结果表明:不同压裂排量下的应力演化方向及最终应力路径曲线形状有着明显的不同,低排量下裂隙附近的应力比值逐渐增大,而在高排量下先增大后减小;煤层泊松比越大,平均压裂半径越低,但对起裂时间及裂隙的扩展形态影响不明显;天然裂隙的发育情况对水力裂隙的扩展起着关键性作用,高裂隙发育煤层水力裂隙扩展的方向性无法预测,应力演化方向会出现反转现象;压裂过程中不同区域的应力演化特征能够反映出裂隙的扩展状态,现场可通过监测压裂区域附近应力变化,判断水力压裂缝网的扩展范围。 相似文献
18.
基于完全流-固耦合的弹塑性理论给出了水力压裂数值计算的弥散裂缝模型,其中材料的弹性部分采用线弹性本构关系,塑性部分采用摩尔-库仑破坏准则及强化准则。依据当前的有效应力状态修正渗透系数来模拟压裂液在裂缝中的流动。渗透系数的修改使用双曲正切函数,并采用平均有效应力作为水力裂缝的起裂判据。在ABAQUS软件中通过用户自定义程序添加了该模型。根据岩石的切面照片建立了含有硬包裹体分布的非均质岩石的有限元计算模型,模拟了中心点注水条件下的水力压裂传播过程,讨论了在常应力状态下非均质岩石中开裂区域、典型位置的应力路径变化和裂缝传播范围随时间变化的特点。进行了多种条件下含有硬包裹体分布的岩石材料的数值试验,得出了基岩材料的弹性模量、凝聚力和渗透系数以及注水速率对峰值注水压力、平均注水压力和裂缝开度的影响规律。 相似文献
19.
To contribute to the understanding of how opening-mode fractures (joints) form and open or close at depth in layered rocks, we present a 2D numerical study aiming to determine whether tensile stress can develop in pre-fractured elastic multilayers submitted to biaxial compressive strain conditions.First, we investigate the role of the elastic and geometrical properties of the layers on the development of tensile stress in models with five bonded layers and containing one open fracture in the central layer. Our results indicate that, in absence of elastic contrast (in Young's modulus) between the layers, no tensile stress develops in the models. However, when the fractured layer is stiffer than the two adjacent layers directly above and below, a lobe of horizontal tensile stress develops centered on the pre-existing fracture. The creation of this tensile stress is contingent upon the partial closing of the fracture. The levels of tensile stress and the thickness of the lobe of tensile stress increase logarithmically with an increase in the elastic contrast and are systematically larger for a larger Soft/Stiff ratio (ratio of the total thickness of the soft layers with the total thickness of the stiff layers).Second, we investigate the role of fracture interaction in the development of tensile stress in models containing a pair of open fractures. We observe that the levels of tensile stress in the region between the fractures are systematically higher than those observed in identical models containing a single fracture. This increase in tensile stress is very large for small elastic contrasts between the layers but diminishes when the elastic contrast increases. Furthermore, the spacing between the pre-existing fractures plays an important role in the stress distribution in the region between them. When the fracture spacing is equal to or lower than 1.15 times the height of the fractured layer for the experimental conditions chosen, the lobes of tensile stress centered on the fractures coalesce. This results in the formation of vast areas of tensile stress in models under remote compressive loading conditions. Such tensile areas are likely to allow the initiation and propagation of subsequent opening-mode fractures.The results obtained provide new insights into the formation of joints in layered rocks in compressive environments, with important consequences on fluid flow. 相似文献
20.
Yao Yao 《Rock Mechanics and Rock Engineering》2012,45(3):375-387
Hydraulic fracturing technology is being widely used within the oil and gas industry for both waste injection and unconventional
gas production wells. It is essential to predict the behavior of hydraulic fractures accurately based on understanding the
fundamental mechanism(s). The prevailing approach for hydraulic fracture modeling continues to rely on computational methods
based on Linear Elastic Fracture Mechanics (LEFM). Generally, these methods give reasonable predictions for hard rock hydraulic
fracture processes, but still have inherent limitations, especially when fluid injection is performed in soft rock/sand or
other non-conventional formations. These methods typically give very conservative predictions on fracture geometry and inaccurate
estimation of required fracture pressure. One of the reasons the LEFM-based methods fail to give accurate predictions for
these materials is that the fracture process zone ahead of the crack tip and softening effect should not be neglected in ductile
rock fracture analysis. A 3D pore pressure cohesive zone model has been developed and applied to predict hydraulic fracturing
under fluid injection. The cohesive zone method is a numerical tool developed to model crack initiation and growth in quasi-brittle
materials considering the material softening effect. The pore pressure cohesive zone model has been applied to investigate
the hydraulic fracture with different rock properties. The hydraulic fracture predictions of a three-layer water injection
case have been compared using the pore pressure cohesive zone model with revised parameters, LEFM-based pseudo 3D model, a
Perkins-Kern–Nordgren (PKN) model, and an analytical solution. Based on the size of the fracture process zone and its effect
on crack extension in ductile rock, the fundamental mechanical difference of LEFM and cohesive fracture mechanics-based methods
is discussed. An effective fracture toughness method has been proposed to consider the fracture process zone effect on the
ductile rock fracture. 相似文献