首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 282 毫秒
1.
Mineral assemblages present within the Charmitan gold(-tungsten) quartz-vein mineralization have been investigated for their cathodoluminescence behaviour, chemical composition and noble gas isotope systematics. This inventory of methods allows for the first time a systematic reconstruction of the paragenetic relationships of quartz, scheelite, sulphides and native gold within the gold mineralization at Charmitan and provides the basis to utilise noble gas data in the discussion of sources and evolution of ore-forming fluids. The vein quartz is classified into four generations based on microscopic and cathodoluminescence investigations. Quartz I shows intense brittle deformation as associated scheelite I. Undeformed scheelite II overgrows scheelite I and has lower light rare earth element and higher intermediate rare earth element contents as well as higher strontium concentrations. Scheelite II is associated with the economic gold mineralization and formed during re-crystallisation and re-precipitation of material which was partly re-mobilised from early scheelite I during infiltration of gold-bearing fluids. Early stage native gold inclusions are often associated with stage 2 sulphides, scheelite II and bismuth tellurides and contain Ag (3.6–24.4 wt.%), Hg (≤1.0 wt.%) and Bi (≤0.2 wt.%). Later stage electrum grains occur in association with stage 3 sulphides and sulphosalts and contain Hg (<0.8 wt.%) and elevated Sb concentrations (up to 3.0 wt.%). Noble gas isotope data (3He/4He: 0.2-0.4 Ra) for hydrothermal ore fluids trapped in the gold-related sulphides and sulphosalts (stage 2 pyrite and arsenopyrite; stage 3 pyrite, sphalerite, galena and lead sulphosalts) suggest that diverse fluid sources were involved in the formation of the Charmitan gold deposit. These data are indicative of a small, but significant input of fluids from external, deep-seated (mantle and possibly lower crust) sources. A decrease in the input of mantle helium and an increasing role of crustal helium from early to later stages of the mineralization is suggested by the measured 3He/4He and 40Ar*/4He ratios. Sulphides from ore veins in meta-sedimentary rocks contain higher portions of meteoric fluids than those in intrusive rock types as indicated by their lower 3He/36Ar ratios. The 3He/36Ar ratios in the meta-sedimentary rocks agree well with ratios typical of gold mineralizations in the Tien Shan gold province completely hosted by meta-sedimentary sequences, indicating intense fluid-wall rock interaction.  相似文献   

2.
The Bulong gold deposit, located in the southwest Tianshan in China, occurs in the Upper Devonian finegrained clastic rocks. The gold orebodies are controlled by an gently inclined interlayer fractured zone. They are hosted only in quartz-barite veins though there are barite veins and quartz veins in the ore district. The δ34S values of pyrite in the ores range from 14.6‰ to 19.2‰ and those of barite from 35.0‰ to 39.6‰, indicating that the sulfur was derived from the strata. 3He/4He ratios of fluid inclusions in pyrite are 0.24-0.82 R/Ra, approximating to that of the crust. The 40Ar/39Ar ratios range from 338 to 471, slightly higher than that of the atmosphere. 40Ar /4He ratios of ore fluids range from 0.015 to 0.412 with a mean of 0.153. Helium and argon isotope compositions of fluid inclusions show that the ore fluids of the Bulong gold deposit were mainly derived from the crust.  相似文献   

3.
Several F, Pb, Zn and Ba deposits are located in the province of Zaghouan in north-eastern Tunisia. They are hosted in Lower Liassic or Upper Jurassic reef limestones, and the overlying condensed Carixian phosphatic limestones and Campanian marls, respectively. The mineralization occurs in three types of orebodies: stratiform replacement heaps and lenses (Jebel Stah and Hammam Zriba), breccia fillings and dissolution void fillings (Sidi Taya) and lodes (Jebel Oust). More than one generation of fluorite is observed in the stratiform deposits. Microthermometric analyses of the inclusion fluids observed in fluorite and quartz show that the economic concentrations of fluorite have deposited from moderate to highly saline (12–22.5 wt% NaCl equivalents) hydrothermal (110–160 °C) mineralizing fluids at the center (Jebel Stah, Sidi Taya) and to the east of the province (Hammam Zriba). Late remobilizations, observed in the stratiform deposits, are related to the circulation of a warmer (up to 185 °C) but less saline (10 wt% NaCl equivalents) fluid (Jebel Stah) and more saline (12–22 wt% NaCl equivalents) fluid (Hammam Zriba). The highest temperature (up to 250 °C) and salinity (32–34 wt% NaCl equivalents) are observed to the west of the province of Zaghouan (Jebel Oust). Less saline (3–6 wt% NaCl equivalents) and moderately hot to hot fluids (up to 220 ± 20 °C) and rich in gaseous CO2 invade most of the ore deposits in later stages and give rise to the massive quartz within fractures at Jebel Stah. Chemical analyses of the fluids extracted from the inclusions occuring in fluorite show compositions dominated by the presence of Na+, Ca2+ and Cl− ionic species and allow the mean temperature of the fluids in the source reservoir to be estimated as 275 ± 25 °C. The circulation of the ore-forming fluids is triggered by a regional tectonic extensional phase which occurs within the post-Jurassic to ante-Miocene time interval. The deposition of the economic concentrations of fluorite resulted from the decrease in pressure and temperature of the hydrothermal brines (Jebel Oust), along with the increase in the dissolved calcium activity (Jebel Stah and Sidi Taya), or a decrease in salinity due to the mixing with a hot, less saline and Na-poor, Ca-rich fluid (Hammam Zriba). The mineralogical associations (CaF2, PbS, ZnS, BaSO4) hosted within carbonate rocks, the temperatures and the salinities of the fluids that gave rise to the more important ore deposits (110–160 °C and 12–22.5 wt% NaCl equivalents), their composition (Na, Ca, Cl) and the molar ratios between the major ionic species, as well as the presence of liquid hydrocarbons in the mineralizing fluids, show that the ore deposits of the province of Zaghouan belong to the carbonate-hosted F, Pb, Zn, Ba Mississippi Valley-type deposits. Received: 23 June 1995 / Accepted: 18 November 1996  相似文献   

4.
Fluid chemistry and processes at the Porgera gold deposit, Papua New Guinea   总被引：4，自引：0，他引：4  
The Porgera gold deposit in Papua New Guinea is a world-class example of an alkalic-type epithermal gold system (stage II), which overprints a precursor stage of magmatic-hydrothermal gold mineralization (stage I). Gas and ion chromatographic analyses of fluid inclusions contained in vein minerals from both mineralization stages have been carried out in order to constrain the compositions of the fluids involved in, and the processes attending, ore deposition. These data indicate the presence of three end-member liquids, the most dilute of which was present throughout the mineralization history and is interpreted to represent evolved groundwater of meteoric origin. Its composition is estimated to have been approximately 500 mM Na+, 10 mM K+, 5 mM Li+, 250 mM Cl−, 0.15 mM Br−, and 0.01 mM I−, plus significant concentrations of dissolved gases. More saline liquids were also present during the two main stages of ore formation, and although their compositions differ, both are interpreted to have been derived at least in part from magmatic fluids, and to have been the media by which gold was introduced into the system. Stage I minerals contain fluid inclusions which decrease in salinity towards this dilute end-member composition through the vein paragenesis, reflecting progressive dilution at depth of the magmatic fluid source by groundwaters. Ore deposition is thought to have been caused largely by simple cooling and/or wallrock reactions, although limited in situ fluid mixing may also have occurred. The most saline fluids, present in early quartz and pyrite, contain at least 810 mM Na+, 530 mM Ca2+, 130 mM K+, 12 mM Li+, 87 mM SO4 2−, 960 mM Cl−, 1.1 mM Br−, and 0.05 mM I−, plus significant but variable concentrations of dissolved gases. Fluid inclusions from stage II hydraulic breccia veins reveal the presence of two distinct liquids with contrasting salinities, which were present at different times during vein formation. A higher salinity liquid appears to have predominated during mineralization, whereas lower salinity groundwaters filled the structures during intervening periods. The ore-forming fluid may have been forcibly injected into the veins from depth during fracturing and depressurization events, displacing the resident groundwaters in the process. The original composition of this fluid is estimated to have been at least 1770 mM Na+, 59 mM K+, 180 mM Li+, 210 mM SO4 2−, 680 mM Cl−, 1.4 mM Br−, and 0.09 mM I−, plus 1.5 mol% CO2, 0.19 mol% CH4, and 0.04 mol% N2. Gas chromatographic analyses of fluid inclusions from stage II samples show a decrease in total gas content between early unmineralized veins and post-mineralization vuggy quartz (suitable samples could not be obtained from the ore stage itself). Post-mineralization samples plot along an experimental gas-saturation curve in the CO2-CH4-H2O-NaCl system, obtained at conditions similar to those attending stage II ore deposition at Porgera (200–300 bar, ˜165 °C). These results are interpreted to indicate a period of depressurization-induced phase separation during hydraulic fracturing, which resulted in rich ore deposition. Volatile gases such as CH4 and N2, in addition to CO2 in solution, are shown to have a significant negative effect on total gas solubility. This effect may be of critical importance in lowering the temperature and increasing the depth (pressure) at which phase separation can occur in epithermal systems. Received: 28 November 1995 / Accepted: 17 July 1996  相似文献   

5.
安徽铜陵冬瓜山铜、金矿床两阶段成矿模式   总被引：21，自引：0，他引：21  
冬瓜山铜金矿床包括层状硫化物矿体、矽卡岩型和斑岩型矿体。层状硫化物矿体具层状形态和层控特征，矿石具块状、层纹状和揉皱状构造。燕山期岩浆岩及其岩浆流体对层状矿体进行了叠加和改造，改变了其结构构造、矿物组合和矿石成分，并在其上叠加蚀变和矿化。层状矿体中的铜是由含铜流体交代块状硫化物矿石形成的。冬瓜山铜金矿床经历了两次成矿作用：第一成矿阶段．在石炭纪中期，海底喷流作用形成了块状硫化物矿床，矿石成分以硫、铁矿为主；第二成矿阶段。燕山期岩浆侵人，一方面岩浆热液与围岩相互作用发生矽卡岩化、硅化、钾长石化、石英绢云母化和青磐岩化，形成矽卡岩型和斑岩型矿体，另一方面岩浆流体对块状硫化物矿体进行叠加改造，致使块状硫化物矿体富集铜等成矿物质。  相似文献   

6.
安徽铜陵新桥铜-金矿床的He、Ar同位素组成及其意义   总被引：3，自引：1，他引：3  
对安徽铜陵新桥铜 金矿床层状矿体和块状矿体的黄铁矿进行了流体包裹体的He、Ar同位素研究。结果表明,成矿流体的N(40Ar)/N(36Ar)≈238～293,N(3He)/N(4He)≈1 03～1 23Ra,与大气饱和水(包括大气降水和海水)的特征值N(3He)/N(4He)=1Ra,N(40Ar)/N(36Ar)=295 5非常接近,表明成矿流体含大气降水和海水,这与野外地质特征也相符合,反映了成矿流体来自海底喷流(热水)沉积作用过程,这一认识为该区铜 金矿床可能的海底热液喷流成因提供了新的证据。  相似文献   

7.
Niuxinshan is a typical example of the numerous mesothermal gold deposits formed during Mesozoic tectono-magmatic reactivation of the Archean North China Craton in eastern Hebei province. Gold occurs in quartz-sulfide lodes in Archean amphibolites and also in greisen zones in the Mesozoic Niuxinshan granite stock. Four mineralization stages can be recognized from early to late: (1) quartz-K-feldspar, (2) quartz-pyrite, (3) quartz-polysulfide, and (4) quartz-carbonate. Gold mineralization mainly occurs in stages 2 and 3. Fluid inclusions in quartz and fluorite from greisen zones in the Niuxinshan granite, and inclusions in vein quartz and sphalerite from stages 1 to 3 in the amphibolites, have been studied by microthermometry. Three compositional types of inclusions are recognized: type 1 (Tp1) are H2O-CO2-bearing inclusions and include primary (Tp1-P) and secondary (Tp1-S) inclusions. These are found in quartz and fluorite from the greisen zones as well as in vein quartz and sphalerite from stages 1 to 3. The Tp1-P inclusions are considered to represent the gold-bearing hydrothermal fluids. Type 2 (Tp2-S) are secondary H2O-CO2 + solid phase inclusions in fluorite from the greisen zones. Type 3 (Tp3-S) are secondary aqueous inclusions with a solid phase which coexist with the Tp2-S in fluorite from the greisen zones. The Tp1-P inclusions show variable VCO2 (commonly 0.3 to 0.6) and XCO2 values (mainly 0.1 to 0.4). The salinities of inclusions cluster around 3 to 11 wt.% NaCl equivalent and their homogenization temperatures to the liquid phase (Th(L)) fall dominantly in the range of 260 to 360 °C. The compositional variations of inclusions in stage 1 probably result from exsolution of magmatic fluids at various stages; immiscibility or boiling of the fluids can be ruled out. The compositional variations of inclusions in the greisen zones and in vein stages 2 and 3 are attributed to cooling, mixing (dilution), and necking-down of the fluids. The Tp1-S and Tp2-S inclusions show salinities of 3 to 6 wt.% NaCl equivalent and XCO2 values of 0.04 to 0.17. Th(L) clusters at 240 to 260 °C. The Tp3-S inclusions have salinities of 3 to 6 wt.% NaCl equivalent and Th(L) of 170 to 240 °C. Isochoric reconstructions, combined with oxygen and sulfur isotope geothermometry of mineral pairs, give trapping P-T conditions for the gold-bearing fluids. The greisen zones formed at 310 to 460 °C and 1.3 to 3.7 kbar; stage 1 veins at 300 to 430 °C and 1.2 to 3.7 kbar; stage 2 veins at 290 to 380 °C and 1 to 3 kbar; stage 3 veins at 250 to 350 °C and 1 to 3 kbar. H2O-CO2 fluids with low to moderate salinities and moderate to high densities (0.66 to 1.01 g/cm3) dominated at early mineralization stages, and evolved towards H2O-richer and CO2- and less saline fluids through time. The retrograde P-T evolution probably resulted from regional uplift and cooling of gold-bearing hydrothermal fluids. The gold bisulfide complex was dominant in the fluids during mineralization and gold deposition was mainly induced by decreases of temperature and pressure, as well as destabilization of the bisulfide complex during sulfidization of wall rocks. Received: 16 March 1998 / Accepted: 11 January 1999  相似文献   

8.
ABSTRACT

The Suyunhe porphyry Mo deposit, located in the West Junggar terrane, is the largest molybdenum deposit found in Xinjiang to date, with a proven reserve of 0.57 Mt. The Suyunhe deposit is associated with Early Permian granitic rocks, which emplaced into the volcano-sedimentary sequences of the Middle Devonian Barluk Formation. Four metallogenic stages are identified in this study. Stage I is marked by the quartz-magnetite-K-feldspar±biotite±pyrite±molybdenite veins, which mainly occurred in the intensively potassic alternation zone and were formed at high temperature (>481°C), high salinity (58.6?65.18 wt.%), and relatively high oxygen fugacity conditions with a fluid system of NaCl-H2O-CO2. Stage II is the main metallogenic stage and develops numerous quartz-molybdenite±pyrite veins associated with muscovite–chlorite alteration, which were formed by immiscible fluids at medium-high temperature (210?427°C), medium-high salinity (43.36?49.90 wt.%), and relatively low oxygen fugacity conditions with the fluid system of NaCl-H2O-CO2-CH4-C2H6. After the main Mo-mineralization, quartz-polymetallic sulphides veins associated with quartz–sericite alteration were formed by fluids at medium-low temperature, low-salinity conditions with the fluid system of NaCl-H2O-CO2 in stage III. The following quartz-polymetallic sulphide veins are quartz-calcite±pyrite veins associated with calcite alteration, which were formed by fluids at low temperature and low-salinity conditions with a fluid system of NaCl-H2O in stage IV.

The δ18O‰ values indicate that the ore fluids of stages I and II are dominated by magmatic water, whereas stages III and IV are dominated by meteoric water. A wide range of δ34S‰ values (?7.1 to 3.4‰) of sulphides between stages I and II indicates that increasing the reducibility plays an important role in molybdenum mineralization. The δ13CCH4 values suggest that CH4 of the ore fluids mainly results from the assimilation–contamination of carbonaceous country rocks, and partly derives from magma. However, the δ13CCO2 values suggest that CO2 of the ore fluids mainly originates from magma, and minor derives from wall-rocks as well as meteoric water.  相似文献   

9.
Vein-type tin mineralization in the Dadoushan deposit, Laochang ore field, Gejiu district, SW China, is predominantly hosted in Triassic carbonate rocks (Gejiu Formation) over cupolas of the unexposed Laochang equigranular granite intrusion. The most common vein mineral is tourmaline, accompanied by skarn minerals (garnet, diopside, epidote, phlogopite) and beryl. The main ore mineral is cassiterite, accompanied by minor chalcopyrite, pyrrhotite, and pyrite, as well as scheelite. The tin ore grade varies with depth, with the highest grades (~1.2 % Sn) prevalent in the lower part of the vein zone. Muscovite 40Ar–39Ar dating yielded a plateau age of 82.7 ± 0.7 Ma which defines the age of the vein-type mineralization. Measured sulfur isotope compositions (δ 34S = −4.1 to 3.9 ‰) of the sulfides (arsenopyrite, chalcopyrite, pyrite, and pyrrhotite) indicate that the sulfur in veins is mainly derived from a magmatic source. The sulfur isotope values of the ores are consistent with those from the underlying granite (Laochang equigranular granite, −3.7 to 0.1 ‰) but are different from the carbonate wall rocks of the Gejiu Formation (7.1 to 11.1 ‰). The calculated and measured oxygen and hydrogen isotope compositions of the ore-forming fluids (δ 18OH2O = −2.4 to 5.5 ‰, δD = −86 to −77 ‰) suggest an initially magmatic fluid which gradually evolved towards meteoric water during tin mineralization.  相似文献   

10.
Scheelite-mineralized microtonalite sheets occur on the SE margin of the end-Caledonian Leinster Granite in SE Ireland. Scheelite, polymetallic sulphides and minor cassiterite occur in veins in the microtonalites, disseminated throughout the greisened microtonalite sheets and in the adjacent wallrocks. Two major mineralized vein types occur in the microtonalite sheets: (1) Scheelite ± arsenopyrite ± pyrrhotite occur in quartz-fluorite veins, generally without a muscovite selvage; (2) Sphalerite ± chalcopyrite ± pyrite ± galena ± cassiterite ± stannite occur in quartz + fluorite veins with a coarse muscovite selvage and are often intergrown with the muscovite. Quartz-hosted fluid inclusions were examined from representative samples of both vein types using petrographic, microthermometric and laser Raman spectroscopic techniques. Three distinct types of fluid inclusions have been recognized. Primary, vapour rich Type 1 inclusions in quartz from the scheelite-mineralized veins are of H2O-CO2-CH4-N2 ± H2S ± NaCl composition and formed between 360–530 °C. Primary and secondary, liquid-rich Type 2 fluid inclusions in the base metal sulphide-mineralized veins are of H2O-CH4-N2 ± H2S-NaCl composition and formed between 340–480 °C. They also occur as pseudosecondary and secondary inclusions in scheelite-mineralized veins. Late dilute, low temperature H2O-NaCl + KCl fluid inclusions may be related to late-Caledonian convection of meteoric waters around the cooling Leinster Granite batholith. Received: 4 September 1996 / Accepted: 23 May 1997  相似文献   

11.
The Janggun iron deposits, Republic of␣Korea, occur as lens-shaped magnesian skarn, magnetite and base-metal sulfide orebodies developed in the Cambrian Janggun Limestone Formation. Mineralization stage of the deposits can be divided into two separate events. The skarn stage (107 Ma) consists of magnetite, pyrrhotite, base-metal sulfides, carbonates and magnesian skarn minerals. The hydrothermal stage (70 Ma) consists of base-metal sulfides, native bismuth, bismuthinite, tetrahedrite, boulangerite, bournonite and stannite. Mineral assemblages, chemical compositions and thermodynamic considerations indicate that formation temperatures, −log fs2 and −log fo2 values of ore fluids from the skarn stage were 433 to 345 °C, 8.1 to 9.7 bar and 29.4 to 31.6 bar, and the hydrothermal stage was 245 to 315 °C, 10.4 to 13.2 bar and 33.6 to 35.4 bar, respectively. Thermochemical considerations indicate that the XCO2 during magnesian skarnization ranged from 0.06 to 0.09, and the activity of H+ presumably decreased when the fluids equilibrated with host dolomitic limestone which resulted in a pH change from about 6.1 to 7.8, and decreases in fo2 and fs2. The δ34S values of ore sulfides have a wide range from 3.2 to 11.6 ‰ (CDT). Calculated 34SH2 S values of ore fluids are 2.9 to 5.4 ‰ (skarn stage) and 8.7 to 13.5 ‰ (hydrothermal stage). These are interpreted to represent an initial deep-seated, igneous source of sulfur which gave way to influence of oxidized sedimentary sulfur to hydrothermal stage. The δ13C values of carbonates in ores range from −4.6 to −2.5 ‰ (PDB). It is likely that carbon in the ore fluids was a mixture of deep-seated magmatic carbon and dissolved carbon of dolomitic limestone. The δ18OH2 O and δD values (SMOW) of water in the ore fluids were 14.7 to 1.8 and −85 to −73 ‰ during the skarn stage and 11.1 to −0.2 and −87 to −80 ‰ in the hydrothermal stage. Received: 5 March 1997 / Accepted: 28 August 1997  相似文献   

12.
桐木山云英岩型锡矿床是湘东锡田锡多金属矿田中一个典型矿床,在详尽的野外考察、矿石结构观察以及流体包裹体岩相学研究的基础上,采用流体包裹体组合的研究方法,利用冷热台、激光拉曼等测试手段,对矿床中锡石中流体包裹体进行直接测定,同时开展与锡石共生的石英及切割矿体的后期石英脉石英中流体包裹体对比研究。结果显示,锡石中流体包裹体的组分、均一温度、盐度与共生的石英存在明显差异,表明锡石与石英形成的P-T-X条件不同。切割矿体的石英脉为成岩成矿后流体作用的产物。与锡石形成相关的流体为中高温、中低盐度的Na Cl-H_2O流体体系,与石英形成相关的流体为复杂的含碳流体。流体体系的冷却作用及流体与围岩的反应可能是导致锡石沉淀的主要因素,与石英形成相关的流体在演化过程中则经历了明显的流体不混溶作用。  相似文献   

13.
The Kalyadi polymetallic copper deposit occurs within the Middle Archaean (≥3.0 Ga), medium-grade Kalyadi schist belt which consists predominantly of ultramafic-mafic schists interbedded with chemogenic chert, detrital high Al-Mg schists and siliceous schists. This sedimentary exhalative type (SEDEX type) ore-body is the only copper deposit hosted in cherts in the western Dharwar craton. The Kalyadi supracrustal rocks are intruded by tonalite-trondhjemitic gneisses (ca. 3.0 Ga) and granite (ca. 2.6 Ga). The Kalyadi copper deposit is polygenetic in nature. The primary ores represented by disseminations of pyrite ± linneite and chalcopyrite ± magnetite essentially along the bedding lamination of the metachert are referred to as the metamorphosed chert-sulphide rhythmites of a primary stratiform type. The ore is of low-grade and records imprints of at least two events of deformation. Pyrite is characterised by high-Co values (262–4524 ppm) and high–Co/Ni ratios (3.0–19.7). Rare earth element patterns of the primary ores and the host metacherts are identical, characterised by La enrichment, absence of Eu anomalies and flat to depleted HREE patterns with δ 34 S = −0.8‰. The secondary (remobilised) ores are structurally controlled occurring as veins and stringers discordant to the bedding lamination or schistosity. The constituent ores are chalcopyrite-pyrite-pyrrhotite with minor pentlandite. These sulphides with low-Co/Ni ratios (0.87–1.80), have either a strong positive or negative Eu anomaly and show slight HREE enrichment. The δ 34 S value ranges from +2.64 to −4.29‰. It is interpreted that the primary stratiform ores and the cherts were derived from volcanogenic hydrothermal fluids as syngenetic/chemical deposits in a deep sea environment. The secondary epigenetic mineralisation is related to subsequent migmatisation, deformational events and granitic activity. Received: 8 September 1995 / Accepted: 18 November 1996  相似文献   

14.
The Jinshan orogenic gold deposit is a world-class deposit hosted by a ductile shear zone caused by a transpressional terrane collision during Neoproterozoic time. Ore bodies at the deposit include laminated quartz veins and disseminated pyrite-bearing mylonite. Most quartz veins in the shear zone, with and without gold mineralization, were boudinaged during progressive shear deformation with three generations of boudinage structures produced at different stages of progressive deformation. Observations of ore-controlling structures at various scales indicate syn-deformational mineralization. Fluid inclusions from pyrite intergrown with auriferous quartz have 3He/4He ratios of 0.15–0.24 Ra and 40Ar/36Ar ratios 575–3,060. δ18Ofluid values calculated from quartz are 5.5–8.4‰, and δD values of fluid inclusions contained in quartz range between −61‰ and −75‰. The δ13C values of ankerite range from −5.0‰ to −4.2‰, and ankerite δ18O values from 4.4‰ to 8.0‰. The noble gas and stable isotope data suggest a predominant crustal source of ore fluids with less than 5% mantle component. Data also show that in situ fluids were generated locally by pervasive pressure solution, and that widespread dissolution seams acted as pathways of fluid flow, migration, and precipitation. The in situ fluids and fluids derived from deeper levels of the crust were focused by deformation and deformation structures at various scales through solution-dissolution creep, crack-seal slip, and cyclic fault-valve mechanisms during progressively localized deformation and gold mineralization.  相似文献   

15.
Gold ore-forming fluids of the Tanami region, Northern Australia   总被引：1，自引：0，他引：1  
Fluid inclusion studies have been carried out on major gold deposits and prospects in the Tanami region to determine the compositions of the associated fluids and the processes responsible for gold mineralization. Pre-ore, milky quartz veins contain only two-phase aqueous inclusions with salinities ≤19 wt% NaCl eq. and homogenization temperatures that range from 110 to 410°C. In contrast, the ore-bearing veins typically contain low to moderate salinity (<14 wt% NaCl eq.), H2O + CO2 ± CH4 ± N2-bearing fluids. The CO2-bearing inclusions coexist with two-phase aqueous inclusions that exhibit a wider range of salinities (≤21 wt% NaCl eq.). Post-ore quartz and carbonate veins contain mainly two-phase aqueous inclusions, with a last generation of aqueous inclusions being very CaCl2-rich. Salinities range from 7 to 33 wt% NaCl eq. and homogenization temperatures vary from 62 to 312°C. Gold deposits in the Tanami region are hosted by carbonaceous or iron-rich sedimentary rocks and/or mafic rocks. They formed over a range of depths at temperatures from 200 to 430°C. The Groundrush deposit formed at the greatest temperatures and depths (260–430°C and ≤11 km), whereas deposits in the Tanami goldfield formed at the lowest temperatures (≥200°C) and at the shallowest depths (1.5–5.6 km). There is also evidence in the Tanami goldfield for late-stage isothermal mixing with higher salinity (≤21 wt% NaCl eq.) fluids at temperatures between 100 and 200°C. Other deposits (e.g., The Granites, Callie, and Coyote) formed at intermediate depths and at temperatures ranging from 240 to 360°C. All ore fluids contained CO2 ± N2 ± CH4, with the more deeply formed deposits being enriched in CH4 and higher level deposits being enriched in CO2. Fluids from deposits hosted mainly by sedimentary rocks generally contained appreciable quantities of N2. The one exception is the Tanami goldfield, where the quartz veins were dominated by aqueous inclusions with rare CO2-bearing inclusions. Calculated δ 18O values for the ore fluids range from 3.8 to 8.5‰ and the corresponding δD values range from −89 to −37‰. Measured δ 13C values from CO2 extracted from fluid inclusions ranged from −5.1 to −8.4‰. These data indicate a magmatic or mixed magmatic/metamorphic source for the ore fluids in the Tanami region. Interpretation of the fluid inclusion, alteration, and structural data suggests that mineralization may have occurred via a number of processes. Gold occurs in veins associated with brittle fracturing and other dilational structures, but in the larger deposits, there is also an association with iron-rich rocks or carbonaceous sediments, suggesting that both structural and chemical controls are important. The major mineralization process appears to be boiling/effervescence of a gas-rich fluid, which leads to partitioning of H2S into the vapor phase resulting in gold precipitation. However, some deposits also show evidence of desulfidation by fluid–rock interaction and/or reduction of the ore-fluid by fluid mixing. These latter processes are generally more prevalent in the higher crustal-level deposits.  相似文献   

16.
The stratiform Cu–Co ore mineralisation in the Katangan Copperbelt consists of dispersed sulphides and sulphides in nodules and lenses, which are often pseudomorphs after evaporites. Two types of pseudomorphs can be distinguished in the nodules and lenses. In type 1 examples, dolomite precipitated first and was subsequently replaced by Cu–Co sulphides and authigenic quartz, whereas in type 2 examples, authigenic quartz and Cu–Co sulphides precipitated prior to dolomite and are coarse-grained. The sulphur isotopic composition of the copper–cobalt sulphides in the type 1 pseudomorphs is between −10.3 and 3.1‰ relative to the Vienna Canyon Diablo Troilite, indicating that the sulphide component was derived from bacterial sulphate reduction (BSR). The generation of during this process caused the precipitation and replacement of anhydrite by dolomite. A second product of BSR is the generation of H2S, resulting in the precipitation of Cu–Co sulphides from the mineralising fluids. Initial sulphide precipitation occurred along the rim of the pseudomorphs and continued towards the core. Precipitation of authigenic quartz was most likely induced by a pH decrease during sulphide precipitation. Fluid inclusion data from quartz indicate the presence of a high-salinity (8–18 eq. wt.% NaCl) fluid, possibly derived from evaporated seawater which migrated through the deep subsurface. 87Sr/86Sr ratios of dolomite in type 1 nodules range between 0.71012 and 0.73576, significantly more radiogenic than the strontium isotopic composition of Neoproterozoic marine carbonates (87Sr/86Sr = 0.7056–0.7087). This suggests intense interaction with siliciclastic sedimentary rocks and/or the granitic basement. The low carbon isotopic composition of the dolomite in the pseudomorphs (−7.02 and −9.93‰ relative to the Vienna Pee Dee Belemnite, V-PDB) compared to the host rock dolomite (−4.90 and +1.31‰ V-PDB) resulted from the oxidation of organic matter during BSR.  相似文献   

17.
Carbonate-limonite veins formed in steeply dipping fractures in the upper few hundred metres of basement greywacke in the actively rising Southern Alps of New Zealand. The veins are found commonly in extensional fractures near to, but not in, major faults associated with mountain uplift, and/or sinistral faults which bound mountain ranges. Some of the veins contain sulphides and minor gold deposited as part of incrementally formed fracture fillings. Oxygen isotope ratios of calcite range widely between +6 and +24‰, and calcite δ13CPDB=−5.5 to −11.5‰. The veins formed from isotopically exchanged crustal fluid with a probable meteoric water component. The shallow vein network is the near-surface expression of a tectonically induced hydrothermal system which has deposited gold-bearing veins with a mesothermal style over several vertical kilometres. This vein network has formed in a dilatational zone of the oblique collisional orogen where near-vertical fractures tap deep-sourced fluids. Similar processes acting at the southern end of the Southern Alps in the Miocene resulted in locally rich mesothermal quartz-gold veins. Received: 21 May 1997 / Accepted: 30 June 1998  相似文献   

18.
The Samgwang mine is located in the Cheongyang gold district (Cheonan Metallogenic Province) of the Republic of Korea. It consists of eight massive, gold-bearing quartz veins that filled NE- and NW-striking fractures along fault zones in Precambrian granitic gneiss of the Gyeonggi massif. Their mineralogy and paragenesis allow two separate vein-forming episodes to be recognized, temporally separated by a major faulting event. The ore minerals occur in quartz and calcite of stage I, associated with fracturing and healing of veins. Hydrothermal wall-rock alteration minerals of stage I include Fe-rich chlorite (Fe/(Fe+Mg) ratios 0.74-0.81), muscovite, illite, K-feldspar, and minor arsenopyrite, pyrite, and carbonates. Sulfide minerals deposited along with electrum during this stage include arsenopyrite, pyrite, pyrrhotite, sphalerite, marcasite, chalcopyrite, galena, argentite, pyrargyrite, and argentian tetrahedrite. Only calcite was deposited during stage II. Fluid inclusions in quartz contain three main types of C–O–H fluids: CO2-rich, CO2–H2O, and aqueous inclusions. Quartz veins related to early sulfides in stage I were deposited from H2O–NaCl–CO2 fluids (1,500–5,000 bar, average 3,200) with T htotal values of 200°C to 383°C and salinities less than about 7 wt.% NaCl equiv. Late sulfide deposition was related to H2O–NaCl fluids (140–1,300 bar, average 700) with T htotal values of 110°C to 385°C and salinities less than about 11 wt.% NaCl equiv. These fluids either evolved through immiscibility of H2O–NaCl–CO2 fluids as a result of a decrease in fluid pressure, or through mixing with deeply circulated meteoric waters as a result of uplift or unloading during mineralization, or both. Measured and calculated sulfur isotope compositions (δ34SH2S = 1.5 to 4.8‰) of hydrothermal fluids from the stage I quartz veins indicate that ore sulfur was derived mainly from a magmatic source. The calculated and measured oxygen and hydrogen isotope compositions (δ18OH2O = −5.9‰ to 10.9‰, δD = −102‰ to −87‰) of the ore-forming fluids indicate that the fluids were derived from magmatic sources and evolved by mixing with local meteoric water by limited water–rock exchange and by partly degassing in uplift zones during mineralization. While most features of the Samgwang mine are consistent with classification as an orogenic gold deposit, isotopic and fluid chemistry indicate that the veins were genetically related to intrusions emplaced during the Jurassic to Cretaceous Daebo orogeny.  相似文献   

19.
The Honghuagou Au deposit is located in the Chifeng-Chaoyang region within the northern margin of the North China Craton. The auriferous quartz veins are mainly hosted in the mafic gneiss and migmatite of the Neoarchean Xiaotazigou Formation along NNW- and NE-striking faults, with pyrite as the predominant ore mineral. The gold mineralization process can be divided into two stages, involving stage I quartz-pyrite and stage II quartz-calcite-polymetallic sulfide. Three types of fluid inclusions (FIs) have been identified in the Honghuagou deposit, namely, carbonic inclusions, aqueous‑carbonic inclusions, and aqueous inclusions. Quartz of stage I contains all types of FIs, whereas only aqueous inclusions are evident in stage II veins. The FIs of stages I and II yield homogenization temperatures of 275–340 °C and 240–290 °C with salinities of 3.4–10.7 wt% and 1.4–9.7 wt% NaCl eqv., respectively. The ore-forming fluids are characterized by medium temperature and low salinity, belonging to the H2O–NaCl–CO2 system. The δ18OH2O values of the ore fluids are between 2.1‰ and 5.9‰, within the range of enriched mantle-derived fluids in the North China Craton. The carbon isotope compositions of calcite (δ13CPDB = −4.4‰ to −4‰) are also similar to mantle carbon. He-Ar isotope data (3He/4He = 0.38–0.44 Ra; 40Ar/36Ar = 330–477) of fluid inclusions in pyrite indicate a mixed crustal and mantle source for the ore-forming fluids. Whereas, S-Pb isotope compositions of sulfides reveal that ore metals are principally derived from crustal rocks. On the basis of available geological and geochemical evidence, we suggest that the Honghuagou deposit is an orogenic gold deposit.  相似文献   

20.
The Mississippi Valley-type (MVT) Pb–Zn ore district at Mežica is hosted by Middle to Upper Triassic platform carbonate rocks in the Northern Karavanke/Drau Range geotectonic units of the Eastern Alps, northeastern Slovenia. The mineralization at Mežica covers an area of 64 km2 with more than 350 orebodies and numerous galena and sphalerite occurrences, which formed epigenetically, both conformable and discordant to bedding. While knowledge on the style of mineralization has grown considerably, the origin of discordant mineralization is still debated. Sulfur stable isotope analyses of 149 sulfide samples from the different types of orebodies provide new insights on the genesis of these mineralizations and their relationship. Over the whole mining district, sphalerite and galena have δ 34 S values in the range of –24.7 to –1.5‰ VCDT (–13.5 ± 5.0‰) and –24.7 to –1.4‰ (–10.7 ± 5.9‰), respectively. These values are in the range of the main MVT deposits of the Drau Range. All sulfide δ 34 S values are negative within a broad range, with δ 34 S pyrite <δ 34 S sphalerite <δ 34 S galena for both conformable and discordant orebodies, indicating isotopically heterogeneous H2S in the ore-forming fluids and precipitation of the sulfides at thermodynamic disequilibrium. This clearly supports that the main sulfide sulfur originates from bacterially mediated reduction (BSR) of Middle to Upper Triassic seawater sulfate or evaporite sulfate. Thermochemical sulfate reduction (TSR) by organic compounds contributed a minor amount of 34S-enriched H2S to the ore fluid. The variations of δ 34 S values of galena and coarse-grained sphalerite at orefield scale are generally larger than the differences observed in single hand specimens. The progressively more negative δ 34 S values with time along the different sphalerite generations are consistent with mixing of different H2S sources, with a decreasing contribution of H2S from regional TSR, and an increase from a local H2S reservoir produced by BSR (i.e., sedimentary biogenic pyrite, organo-sulfur compounds). Galena in discordant ore (–11.9 to –1.7‰; –7.0 ± 2.7‰, n = 12) tends to be depleted in 34 S compared with conformable ore (–24.7 to –2.8‰, –11.7 ± 6.2‰, n = 39). A similar trend is observed from fine-crystalline sphalerite I to coarse open-space filling sphalerite II. Some variation of the sulfide δ 34 S values is attributed to the inherent variability of bacterial sulfate reduction, including metabolic recycling in a locally partially closed system and contribution of H2S from hydrolysis of biogenic pyrite and thermal cracking of organo-sulfur compounds. The results suggest that the conformable orebodies originated by mixing of hydrothermal saline metal-rich fluid with H2S-rich pore waters during late burial diagenesis, while the discordant orebodies formed by mobilization of the earlier conformable mineralization.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号