首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
A geochemical survey of Belgium and Luxembourg was carried out as part of an international research project entitled ‘Regional geochemical mapping of Western Europe towards the year 2000'. The aim of this research was to map regional background geochemical patterns based on pristine or at least pre-industrial overbank samples and to deduce regional information on the degree of environmental pollution of floodplain and present-day river sediments. Over the entire study area (about 33,000 km2), 66 overbank sites have been sampled. Catchment areas range between 60 and 600 km2. At each site an overbank profile has been dug out in the immediate vicinity of the river and described in detail. A first composite sample was taken 5–25 cm below the surface. This sample is supposed to represent deposition over the last centuries. Human interferences in this interval are often inferable based on changed sedimentary characteristics and the presence of anthropogenic particles such as charcoal, slags and brick fragments. A second composite sample was taken at depth, usually >1.5 m below the surface over an interval of about 20 cm. In most sites, the profile characteristics allowed to assume pre-industrial or even pristine conditions for this lower overbank sample. In some profiles this was confirmed by 14C-dating and/or by the absence of anthropogenic particles. Finally, a present-day stream sediment was sampled on the site to infer the actual pollution status. After drying at 80°C, disaggregation and sieving, the <125 μm fractions of the three sediment samples were analysed by XRF for major elements and several trace elements. Lower overbank samples generally show a direct link with the geological substrate and allow to assess natural background concentrations. Results from the mapping exercise as well as from the statistical analyses display a clear contrast between the northern part of Belgium where Cenozoic unconsolidated sandy and silty formations dominate which are especially vulnerable for erosion, and the southern part of Belgium and Luxembourg where Paleozoic and Mesozoic sandstones, carbonates, marls and shales are the prevalent lithologies. Here the shales are the most intensively eroded lithologies. This is especially reflected in the element patterns of Al2O3, MgO, K2O, Ga, Ni, Rb, Sc and V which negatively correlate with SiO2. Despite the human related pollution, the geological contrast between north and south Belgium is still recognisable in the geochemical pattern of the upper overbank and present-day stream sediment samples for the above-mentioned elements. Furthermore there is a clear increase in heavy metal contents (Zn, Cd, Pb, Cu), As and in certain locations in Ba from the lower to the upper overbank sediment, as well as to the present-day stream sediment. The relative increase in element content allows to assess the degree of pollution and helps to define those drainage areas where more detailed research is needed.  相似文献   

2.
Molybdenum mining in the Knabena—Kvina drainage basin (1918–1973) left more than eight million tons of tailings in two small lakes in the headwater area of the Knabena river. The piles, that reach above the water surface, were freely eroded until a dam was built to reduce the dispersion in 1976. Sampling of tailings and fluvial sediments took place almost 20 years later. Sampling media were natural sediment sources, 1-cm-thick slices of overbank sediments of various depths, material from the tailings pond, sandbars, stream sediments, fjord sediments, and integrated samples of floodplain surfaces (0–25 cm). In total 734 samples were collected. Chemical analysis (ICP-AES after aqua regia or HNO3 extraction) showed that overbank sediments at a certain depth represent the pre-industrial trace metal concentrations within the drainage basin. The tailings and recent fluvial sediments were enriched in approximately the same element suite. The highest enrichment factors were obtained for Cu (8–53) and Mo (22–57). Fluvial processes in the tailings pond have probably selectively eroded fine-grained, low-density particles. Thus, coarse chalcopyrite may have been left behind, while molybdate associated with fine-grained particles may have been selectively entrained causing dilution of Cu and enrichment of Mo in the downstream fluvial sediments. In the sandbars, the highest Cu and Mo concentrations were found in fine-grained sediments downstream of a low-gradient reach that act as a bedload trap. On the floodplains, it is seen that the first areas to be inundated in a flood situation (proximal to the river and in depressions) have the highest metal concentrations. For regional geochemical mapping it is suggested that overbank sediment profiles along river reaches with a laterally stable or slowly migrating channel, should be sampled. In such floodplains, pre-industrial overbank sediments are usually preserved at depth. In case of laterally unstable reaches upstream of the sampling point, polluted and unpolluted sediments may be interlayered or mixed. Therefore, samples should be collected from various depths or sedimentary units in such profiles. A similar sampling strategy should probably be adopted to detect vertical migration of elements especially in areas with acid rain and low bedrock buffer capacity. To obtain high contrasts between polluted and unpolluted drainage basins, the overbank sediment profiles should be within the proximal part of the floodplain.  相似文献   

3.
Overbank sediments of the Geul River (East Belgium) are highly contaminated by the heavy metals Pb, Zn, and Cd due to former Pb-Zn mining activities in the drainage basin. Geochemical variations in vertical overbank sediment profiles sampled 1 km north of the mine tailings of Plombiéres allow metal fluxes back to the 17th century to be reconstructed. The vertical profiles are subdivided into three major units corresponding to different industrial periods based on sedimentological criteria as well as on the distribution of contaminants. Alluvial sediments with the highest heavy metal concentrations correspond to the major period of mining activity of the 19th century. The fact that Zn mining at the La Calamine open mine started before large-scale mining of the PbS-ZnS subsurface exploitations is reflected in the vertical profiles by an increase in Zn content before a marked increase in Pb and Cu. The regional extent of contamination in the alluvial deposits was evaluated on the basis of the geochemical analysis of sediments at depths of the 0–20 cm and 80–100 cm. Most of the upper samples are extremely contaminated. Significant local variations in heavy metal concentration in the lower samples are interpreted in terms of which overbank sediment horizon has been sampled at a depth of 80–100 cm. This indicates that blind sampling of overbank sediments to characterize the degree of contamination in shallow boreholes can give very erratic results.  相似文献   

4.
Conventional stream sediment sampling in which sediments are taken from the active channels during reconnaissance regional geochemical surveys in gold exploration has over the years failed to delineate prospective target zones in northern Ghana, where the relict is flat. Whereas the technique has been successful in the south western Ghana, which is characterised by moderate to high relief, generally the savannah north is associated with low relief, commonly with flat topographies and generally decoupled stream channels. Geochemical comparison of active stream and overbank sediments in this study demonstrate that active stream channels may contain contaminated materials of recent origin, but overbank sediments, except for the uppermost horizons, represent alluvial regolith of earlier depositional cycles over time. Based on gold value repeatability, composite samples taken from the overbank sediment layers were relatively less erratic and are considered to be an appropriate geochemical medium in delineating potential regional gold targets for follow up. The results show that overbank sediment sampling can be used as a cost-effective method to define broad anomalous zones; and the technique must be considered useful during reconnaissance geochemical surveys in the savannah regions.  相似文献   

5.
To develop a technique of implementing global ultra-low density geochemical sampling and as a contribution to the International Geochemical Mapping Program (IGCP Project No. 259), an orientation study in the use of deep (lower-layer) overbank sediments was conducted in Jiangxi Province of Southeast China in 1989–1990. Ninety-four samples were collected at depths of 50 to 120 cm from overbank terraces at an average density of 1 site per 1800 km2. The total area of sampled catchment basins is approximately equivalent to 18% of Jiangxi Province. Most of the samples were collected at outflow sites of catchment basins with areas of 100 to 800 km2. The samples were analyzed for 39 elements.The representativity of wide-spaced lower-layer overbank sediment sampling is discussed from various perspectives; the following features have been observed: (1) Widespaced lower-layer overbank sediment data and the data from China's national geochemical mapping (RGNR) project show similar geochemical patterns for W, Sn, Pb, Cu and Zn. (2) The results of wide-spaced lower-layer overbank sediment sampling demonstrate that catchment basins with areas of 100 to 800 km2 are suitable sample site locations for the global geochemical reference network. (3) Wide-spaced lower-layer overbank sediment sampling is a fast and cost-effective way to identify geochemical provinces and has strategic significance in mineral exploration. (4) There is a significant correlation between the W content of wide-spaced lower-layer overbank sediment samples and the presence of W mineralizations within the catchment basins. (5) The distributions of Ni, Cr and V in wide-spaced lower-layer overbank sediment samples distinctly reveals the boundary between the Yangtze sedimentary platform and the South China Caledonian fold system in Jiangxi Province. (6) Distributions of Rb and Be coincide with the Yanshan granites, which are closely related to the major ore-forming episodes in Jiangxi Province.  相似文献   

6.
 As, Be, Cd, Co, Cr, Cu, Hg, Ni, Pb, V, Se and Zn concentrations were determined and compared in lake and overbank sediments from 33 catchments without local pollution sources in southern Norway. There were no significant differences in concentrations of Be, Co, Cr, Cu, Ni, and V in overbank and pre-industrial lake sediments. In areas with shallow overburden, and significant influence from long-range atmospheric pollution, concentrations of As, Cd, Hg, Pb, Se, and Zn in overbank sediments were probably modified by vertical percolating water. In such areas, we suggest using lake sediments as a better sampling medium for mapping pre-industrial concentrations. Pre-industrial lake sediments yield natural concentrations of Hg and Se, which consist of both geogenic and natural atmospheric deposition. Important covariables like organic carbon content, Fe oxides, and fine mineral fraction were generally higher in pre-industrial lake sediments as compared to overbank sediments. By adjusting for such differences overbank sediments could be used as an alternative in mapping background concentrations of trace metals in regions with few lakes. Received: 19 February 1999 · Accepted: 17 April 1999  相似文献   

7.
In the mining district of Plombières-La Calamine (East Belgium), extensive Pb–Zn mining activities resulted in an important contamination of overbank sediments along the Geul river. Moreover, a huge amount of heavy metals is stored in a dredged mine pond tailing, which is located along the river. In the dredged mine pond tailing sediments, Pb–Zn minerals control the solubility of Zn, Pb and Cd. Although Pb, Zn and Cd display a lower solubility in overbank sediments compared to the mine tailing pond sediments, elevated concentrations of Pb, Zn and Cd are still found in the porewater of the overbank sediments. The considerable ‘actual’ and ‘potential’ mobility of Zn, Pb and Cd indicates that the mine pond tailing sediments and the overbank sediments downstream from the mine pond tailing represent a considerable threat for the environment. Besides the chemical remobilisation of metals from the sediments, the erosion of overbank sediments and the reworking of riverbed sediments act as a secondary source of pollution.  相似文献   

8.
In Scandinavia, most fluvial erosion takes place in the Quaternary glacial overburden at a restricted number of small source areas along individual drainage channels. As a consequence, a sample of active stream sediment is representative of only a very limited portion of the drainage area. This restriction makes stream sediment less reliable for regional exploration than generally expected. Overbank (levee or river-plain) sediment produced during large floods is an alternate more representative sampling medium. The sediment suspended during a flood has a much more widespread origin, and when the load is deposited upon the flood plain, nearly horizontal strata are formed and preserved at levels above the ordinary stream channel. A composite sample through a vertical section of such strata represents a great number of sediment sources that have been active at different times and forms an integrated sample of the entire catchment area. Because young sediments overlay older, the uppermost layers will be contaminated by pollutants in industrialized regions, but those at depth may remain pristine and will to a greater extent reflect the natural pre-industrial environment. In regional geochemical mapping, overbank sediment can be sampled at widely spaced sites, keeping costs per unit area low. Examples from Norway (1 sample station per 500 km2) show that overbank sediment produces broad geochemical patterns with high contrasts reflecting the bedrock geochemistry. Some patterns agree with known geological units and metallogenic provinces, but hitherto unknown major structures have also been indicated. A large Mo-deposit missed by a traditional stream survey is readily detected in the overbank sediment. It is concluded that overbank sediment is a promising alternate sample medium that should be tested in other physiographic regions.  相似文献   

9.
An anomalous area (100 km2) revealed by a previous regional overbank sediment sampling survey by the Geological Survey of Norway was followed-up for Ti, Nb, Y, Zr, La and Ce by drainage and lithogeochemical sampling and analyses. The drainage samples were anomalous in the same elements as in the overbank samples and contained similar concentrations. The lithogeochemical results did not indicate mineralization and showed only a small enhancement of Ti, Zr, La and Ce in mylonitic rocks.Mineralogical studies of the drainage samples revealed, apart from proportions of quartz and feldspars, that stream sediments and heavy mineral concentrates are similar in mineralogy, with epidote predomination and several vol% of fine-grained titanite and zircon. Drainage samples contained amounts of Nb, Y, and Zr up to ten times larger than average contents of rock samples. Enhanced light REE (La and Ce) and Nb reflect host minerals, titanite, and enhanced Y possibly zircon and/or allanite.Anomalies in both media do not relate to mineralization. The overbank samples and the drainage samples provide comparable geochemical data.  相似文献   

10.
The geochemical study of alluvial sediments allows to reconstruct pollution through time. Geochemical and sedimentological variations recorded in 40 vertical overbank sediment profiles from Belgium and Luxembourg can be classified in three dominant pattern types:• type 1 profiles with dominantly non-anthropogenically influenced geochemical distribution patterns. These profiles are devoid of anthropogenic particles such as charcoal, plastic, brick and slag fragments, with the exception, in some cases, of their uppermost parts. Background concentrations thus are displayed throughout the profile (subtype 1A). However, in this group, profiles displaying anomalous values caused by the presence of heavy minerals (subtype 1B) or by base metal mineralisations in the catchment (subtype 1C) also occur;• type 2 profiles displaying clear evidence of anthropogenic influences. Most of these profiles display a gradual increase in heavy metal content in their upper part, with values doubling or tripling (subtype 2A). However, other profiles display a dramatic increase in pollution-related elements caused by past or present-day heavy industrial activities in the catchment (subtype 2B). Here also the sedimentological patterns reflect the influence of the industrial activities;• type 3 profiles contain features related to pedogenetic translocations of mobile elements. Apart from classical pedogenetic features such as illuviation/eluviation, the mobility of As and Cd is of particular importance. From a sedimentological point of view, these profiles do not necessarily differ from type 1 or 2 profiles.It should be noted that in some profiles, pattern types can be superimposed. Type 2B profiles are of particular environmental concern, because the potential release of heavy metals may have consequences for agricultural activities or groundwater contamination in the catchment. Furthermore, reworking of polluted sediments temporarily stored in the alluvial plain can also have negative effects on the ecosystem.  相似文献   

11.
A regional geochemical and mineralogical study aimed at investigating the mineralization in the western-part of the Walawe Ganga (river) Basin in Sri Lanka is represented in this paper. The river basin is the 3rd largest in the country and has within it a boundary zone between two geologically different crustal blocks, which are marked by granulitic grade rocks and amphibolite grade rocks. Size fractions of stream sediments (< 63 μm; 63–125 μm; 125–177 μm and 177–250 μm) developed on the granulite-grade metamorphic terrain have been analysed at their source for their mineralogical and selected element compositions. Thirty-eight (38) sediment samples and 15 representative probable parent rock samples were chemically analysed giving special emphasis to the High Field Strength trace Elements (HFSE) including the Rare Earth Elements (REE). The granulite grade rocks in the study area is geochemically similar to that of post Archean upper crust. However the stream sediments developed from the high-grade rocks during the intense weathering, are markedly enriched with HFSE and REE. The enrichment of HFSE and LREE is accounted for by the presence of HFSE- and REE- rich accessory mineral phases such as zircon, monazite, apatite, garnet and rutile in the sediments. In some samples, the content of heavy minerals contributes as much as 50 wt. %. These minerals act as a source of elements in the sediments. However, extreme hydraulic sorting of HFSE- and REE-bearing minerals during the sediment deposition cannot be expected within a short distance from near the sources except from a mineralized occurrence. Therefore, the higher enrichment of these elements presumably indicates occurrences of scattered mineral sources such as highly differentiated granites and associated pegmatites within the Walawe Ganga drainage basin. These granitic pegmatites are probably intruded during or soon after the main granulite-facies metamorphic event and similar events are seen in other terrains of East-Gondwana.  相似文献   

12.
A geochemical investigation was carried out mainly in a 14-km thick sedimentary sequence of late Precambrian age. The project included analysis of rock samples and drainage samples for Cu, Co, and Zn. The drainage samples were heavy-mineral concentrates and stream sediment samples.The results for the drainage sediments distinguish three well defined cupriferous horizons in the sedimentary column. Lithogeochemical studies of quartzites, pelites, and carbonates confirm that the anomalous values obtained in the drainage sediments arise from several Cu-mineralized horizons.The study has shown that geochemical prospecting appears to be well suited to Cu prospecting in Central East Greenland under arctic climate conditions even with a low sampling density of one sample per 5–10 km2 for the drainage samples, and one sample per 10–100 m of the sedimentary stratigraphic column for the rock samples.  相似文献   

13.
The Mapocho river, which crosses downtown Santiago, is one of the most important rivers in contact with a population of about six million inhabitants. Anthropogenic activities, industrialization, farming activities, transport, urbanization, animal and human excretions, domestic wastes and copper mining have affected the river, contaminating it and its sediments with heavy metals. Concentration and distribution of Cu, Zn, Pb and Cd were studied with the purpose of determining their bioavailability and their relation with the characteristics of the sediments. Freshly deposited seasonal sediments were collected from 0–8 cm depths from 6 locations (S1 to S6) along the 30-km long channel length, in the four seasons of year on the following dates: May 2001 (D1, autumn); August 2001 (D2, winter); October 2001 (D3, spring) and January 2002 (D4, summer). The dried samples were sifted to obtain the < 63-μm sediment fraction, since it has been shown that large amounts of heavy metals are bound in the fine-grained fraction of the sediment. Cu and Zn were analyzed by atomic absorption spectrophotometry and Pb and Cd by square wave anodic stripping voltammetry. The highest concentrations of Cu (2850 μg g− 1) were found in the northern part of the river (S1, average D1–D4), near the mountains and a copper mine, and then decreased downstream to 209 μg g− 1 (S6). Total Zn showed an irregular variation, with higher values at S1 (1290 μg g− 1) and high values in some winter sampling (1384 μg g− 1 S4, S5–D2). Pb showed different trends, increasing from S1 to S6 (17 to 61 μg g− 1), with the highest values in the summer samples (83 μg g− 1, S4–S6, D4), and total Cd increased slightly from mean values of 0.2 and 0.5 μg g− 1. Partition into five fractions was made using Tessier's analytical sequential extraction technique; the residue was treated with aqua regia for recovery studies, although this step is not part of the Tessier procedure. The results show that Cu, Zn and Pb in the sediments were dependent on the sampling places along the river, and variation in two years was low (D1–D4). The highest values of total organic matter, carbonate and conductivity were found in S6, which has the smallest size particles, while at S1 the sediments were predominantly sand and contain larger amounts of silica. Cu associated with carbonate decreased gradually from 58% (1771 μg g− 1, S1) to 16% (32 μg g− 1, S6); Cu bonded to reducible fraction was almost constant (33% to 37%), and Cu associated with oxidizable fraction increased from 7% (S1) to 34% (S6), but copper content was lower (214 to 68 μg g− 1). Zn had a similar fractionation profile. However, Pb bound to oxidizable fraction did not show significant percent variation along the river (20% to 19%), but the amount bounded was 4 to 12 μg g− 1. The residual fraction increased from 24% to 41% (5 to 25 μg g− 1, S1 to S6). The distribution of Cd in the sediment was almost independent of the sampling stations and was bound to carbonate, reducible and residual fraction in similar proportion. Cu and Zn at S1 were mainly bound to carbonates and reducible phases with 91% and 73% (2779 and 965 μg g− 1, respectively), and with a change in the pH and/or the redox potential of the sediment–water system, these contaminants could easily enter the food chain. In S6 the amount of Cu and Zn in these phases was 50% and 53% (100 to 313 μg g− 1, respectively).  相似文献   

14.
ABSTRACT

Siliciclastic sediments from the Upper Palaeozoic Konya Complex and its Mesozoic cover were studied by a multi-method approach combining thin-section petrography, bulk-rock geochemistry, mineral chemistry of rutile, and U–Pb geochronology of detrital zircons. Provenance sensitive data of samples from the Upper Palaeozoic Hal?c? Formation indicate sediment supply from mainly low- to medium-grade metamorphosed sedimentary rocks of felsic character, while the contribution from volcanic rocks was rare. The detrital zircon record of sediments from the Hal?c? Formation documents sediment supply from different sources and excludes a similar provenance. Some samples show great similarities with Palaeozoic sandstones from the cover sequence of the Saharan Metacraton and the Arabian–Nubian Shield, while the other samples indicate a provenance that must be sought in units with a southern Eurasian affinity. The upper limit for sediment deposition in the Hal?c? Formation is mostly constrained by Early Palaeozoic zircon populations; however, sediment accumulation in Pennsylvanian–Cisuralian time is more likely, contemporaneously with the Upper Palaeozoic succession on the Karaburun Peninsula (western Turkey). The provenance of sediments from the Upper Triassic Ard?çl? Formation remains enigmatic, but the source should be sought nonetheless in units close to the depositional site. In any case, detrital zircon age spectra and compositional data exclude recycling of underlying rock units (i.e. Hal?c? Formation). Overall, our new provenance data reveal great similarities between the Konya Complex and comparable units (Chios, Karaburun) but also highlight distinct differences in terms of sediment composition and provenance.  相似文献   

15.
This study compares the geochemical response of stream sediments and adjacent vegetation samples, with variations in drainage catchment lithology and the occurrence of mineralisation, within a 14,000-km2 block of the northeastern region of New South Wales, Australia. The area contains a range of lithologies within a Devonian–Permian accretionary complex and Mesozoic sedimentary basin, as well as a wide range of mineral deposits. Sampling was designed to confine each sub-catchment to a single lithological group (mafic and ultramafic rocks, acid intrusives, volcanics, metasedimentary and sedimentary rocks or alluvium). Leaves of over 20 genera, dominated by (Allo-)Casuarina, Eucalyptus, Acacia, Callistemon and Melaleuca, and the <250-μm fraction of the stream sediments were analysed by INAA. The uptake of most trace elements varied between genera, with Callistemon displaying the highest median As and La contents and Eucalyptus the highest Co contents. The stream sediment and vegetation geochemistry reflect both hydromorphic and mechanical dispersion within sub-catchments, with regional patterns dominant over local influences. The vegetation appears to be influenced to a greater extent by hydromorphic dispersion, as indicated by differences in the ratio of leaf to sediment Cr concentrations in sub-catchments draining serpentinites and basalts. Although most known mineral deposits in the region produced anomalies in at least one medium, there was little correlation between the trace element concentrations of the vegetation and stream sediments on a site-by-site basis. A number of Au targets were only detected on the basis of the biogeochemistry and others were only reflected in the stream sediment geochemistry. In general, vegetation displayed more extensive dispersion trains away from mineralisation than did the stream sediments. Differences in the response of the two sampling media suggest their joint use in exploration or environmental surveys to maximise the probability of detecting mineralisation.  相似文献   

16.
Three undisturbed sediment samples were collected from the intertidal zone of the Jiaojiang Estuary of Zhejiang Province, China. The sediments were found to contain remarkably low concentrations of organic carbon (<0.6%) and acid volatile sulfide (AVS) (<30 μmol g−1). The availability of these two substrates likely constrained sulfate reduction and pyritization of several trace metals, respectively. This was especially true at one station where AVS concentrations in the upper 20 cm averaged less than 0.05 μmol g−1. Although the depth dependence of the degree of trace metal pyritization was generally consistent with expectations based on redox conditions, depth profiles of reactive-metal and pyrite-metal concentrations in several cases revealed more complex behavior and a positive correlation between reactive-metal concentrations and pore water metal concentrations.  相似文献   

17.
Chromium ore was treated to produce ferrochromium from 1979 until 2000 in a smelter in Burrel, 35 km NE of Tirana (Albania). As a consequence, large amounts of solid waste, i.e. slags (about 9.106 m3) have been disposed next to the smelter, disfiguring the landscape. In an attempt to define contaminated sites, heavy metal content of the different sampling media have been compared with respective background samples.In the study area, the determination of background values in soil samples is complicated due to the different geological substrates. Cr and Ni background concentrations in serpentinite-derived soils, west of the smelting plant, are markedly higher than in the Pliocene gravel/sandy soils, where the smelter is situated (Cr 2147 and 193 mg/kg, respectively; Ni 2356 and 264 mg/kg). These values are clearly lower than those encountered around the smelter. Average total Cr and Ni concentrations in soils around the smelter are 3117 and 1243 mg/kg, respectively. The highest concentrations of Cr (up to 2.3 wt.%), were recorded in samples taken near the smelting compartment within the industrial plant and next to the slags clearly indicating that the smelter forms a point source of Cr contamination. The Cr / Fe ratio is the best indicator to differentiate non-polluted (Cr / Fe Serpentinite soil: 130–390; Pliocene soils: < 130) from polluted areas (> 390 smelting nearby of the slags).Cr and Ni values for local backgrounds in stream and overbank sediments were taken in the Mat river 6 km upstream and to the east of the smelter (268 and 430 mg/kg for Cr, and 306 and 604 mg/kg for Ni, respectively). Equivalent sediments taken from the Zalli i Germanit river, which drains the smelter area are respectively 816 and 1126 mg/kg for Cr and 1115 and 1185 mg/kg for Ni.Dust samples, taken from the lofts of houses up to 2 km from the smelter, display high concentrations of Cr, Ni and Zn (average contents of 2899, 436 and 902 mg/kg, respectively). The later concentrations in the dust samples have been confirmed by mineralogical analysis where Cr-bearing mineral phases such as ferrochromium and chromium oxides, clearly relate to the activity of the smelter. Consequently, atmospheric deposition of dust particles forms a serious problem and can also be responsible for the elevated contents encountered in soil samples around the smelter.All these data show that the degree of contamination caused by industrial activity of the Burrel Cr-smelter is severe, although no Cr(VI) was detected in soil water extractions nor in the surface or groundwater where concentrations were < 0.01 mg/kg.  相似文献   

18.
Four anoxic sediment cores were collected from Chini Lake, Malaysia in order to investigate the variability of polycyclic aromatic hydrocarbon (PAH) and perylene concentrations. The study also determined significant differences of perylene concentrations in different sediment layers. Total PAH concentrations ranged from 248 to 8098 ng g−1 in the samples. Diagnostic PAH ratios such as methylphenanthrenes/phenanthrene (MP/P), phenanthrene/anthracene (P/A) and fluoranthene/(fluoranthene + pyrene) (Fl/(Fl + Py) revealed a dominance of pyrogenic influences and partial petrogenic inputs to the top sediment layers. Perylene concentrations were high in the top layers (<12 cm) and increased with increasing depth. There is a significant positive correlation (r = 0.705, p = 0.01) between perylene concentrations and TOC. Analysis of variance (ANOVA) and LSD revealed significant differences (p < 0.05) in TOC-normalized perylene concentrations between the upper (<12 cm) and bottom layers (>12 cm). The average perylene concentrations accounted for 26–50% (0–12 cm) and 50–77% (12–36 cm) of pentacyclic-aromatic hydrocarbon isomers (PAI) present whereas it made up 10–34% (0–12 cm) and 46–66% (12–36 cm) of the total PAH. The average pyrene concentrations decreased with increasing depth and accounted for 62% (0–3 cm), 20–23% (3–12 cm) and 3–1.4% (12–36 cm) of perylene present. The results of hierarchical cluster analysis based on these ratios suggested different input sources for the top and bottom layers. It is concluded that the activity of termites on woody plants produced perylene which is supplied to the lake by run-off from the heavy and frequent rains in this Asian tropical climate. In addition, there was also in situ formation of perylene in the bottom layers due to diagenetic processes.  相似文献   

19.
Accumulation and distribution of heavy metals and phosphorus in sediments impact water quality. There has been an increasing concern regarding fish health in the St. Lucie Estuary, which is related to increased inputs of nutrients and metals in recent decades. To investigate vertical changes of contaminants (P, Cd, Cr, Co, Cu, Ni, Pb, Zn, and Mn) in sediments of the St. Lucie Estuary in South Florida, 117 layer samples from six of the 210 to 420 cm depth cores were analyzed for their total and water-soluble P and heavy metals, clay, total Fe, Al, K, Ca, Mg, Na, and pH. Principal component analysis (PCA) was used in two sets of analytical data (total and water-soluble contaminant concentrations) to document changes of contaminants in each core of sediments. The PCA of total contaminants and minerals resulted in two factors (principal components). The first and second factors accounted for 61.7 and 17.2 % of the total variation in all variables, and contrast indicators associated with contaminants of P, Cd, Co, Cr, Ni, Pb, Zn, and Mn and accumulation of Fe and Al oxides, respectively. The first factor could be used for overall assessment of P and heavy metal contamination, and was higher in the upper 45–90 cm than the lower depths of each core. The concentrations of P and heavy metals in the surface layers of sediments significantly increased, as compared with those in the sediments deeper than 45–90 cm. The PCA of water-soluble contaminants developed two factors. The second factor (Cu–P) was higher in the upper than the lower depths of the sediment, whereas the highest score of the first factor (Cd–Co–Cr–Ni–Pb–Zn–Mn) occurred below 100 cm. The water-soluble Cu and P concentrations were mainly dependent on their total concentrations in the sediments, whereas the water-soluble Cd, Co, Cr, Ni, Pb, Zn, and Mn concentrations were mainly controlled by pH.  相似文献   

20.
Reproducibility of overbank sediment sampling was tested in twenty-nine floodplains in Europe, ten in Greece and nineteen in Norway, by the collection of duplicate pairs of samples. Distances between duplicate sites in Greece were 60 to 100 m, and in Norway 100 to 200 m. In Norway the same nineteen floodplains were sampled by a second team for the purpose of investigating differences in sampling variability and technique. Total element contents were determined in all samples. Paired samples were compared by calculating Spearman's rank correlation coefficient on the raw analytical data, and one-way analysis of variance on the log-transformed data. Pairs of overbank sediment samples collected from different floodplains by the Hellenic team and the first Norwegian team showed high rank correlations and low within-basin variability (sampling and analytical variance). Statistical results of the second Norwegian team were comparatively poorer; both Spearman's rank correlation coefficient and one-way analysis of variance, showed very low positive to negative correlations and high within-basin variation, suggesting a non-uniform distribution of elements in the Norwegian overbank sediment sequences and differences in the sampling technique of the two teams. Nevertheless, careful location of sample sites, as has been done by the Hellenic and the first Norwegian teams, reduces considerably the sampling variability, and the overall sampling reproducibility for most elements is very good for distances up to 100 m in Greece and 200 m in Norway, provided correlated overbank sediment sequences are sampled. The implication of this study for multinational regional geochemical mapping is that overbank sediment sampling must be carried out by well-trained professional teams of exploration geochemists, and where possible by one sampling team for the whole country.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号