共查询到20条相似文献，搜索用时 46 毫秒
1.
《China Geology》2021,4(2):299-310
To accurately identify the natural gas hydrates (NGH) in the sea area of the Makran Accretionary Prism, Pakistan, this paper presents the testing and analysis of major and trace elements in sediment samples taken from two stations (S2 and S3) in the area by the China Geological Survey. As shown by testing results, all major elements are slightly different in content between the two stations except SiO2 and CaO. This also applies to the trace elements that include Sr and Ba primarily and Cr, Ni and Zn secondarily. It can be concluded in this study that the tectonic setting of the Makran Accretionary Prism is dominated by oceanic island arc and that provenance of the Makran Accretionary Prism is dominated by felsic igneous provenance, which is at the initial weathering stage and mainly consists of granodiorite. Besides terrigenous detritus, there are sediments possibly originating from Makran-Bela Ophiolite from the northwestern part and Murray Ridge igneous rocks from the southeastern part. The V/Cr, Ni/Co, and V/(V+Ni) ratios indicate that sediments of the two stations are in an oxidation-suboxidation environment. However, the authors infer that the sedimentary environment of the sediments 3.0 m below the seafloor tends to be gradually transformed into a reduction environment by comparison with the Qiongdongnan Basin in the South China Sea where NGH has been discovered. The sediments in the Makran Accretionary Prism are rich in organic matter, with total organic carbon (TOC) content greater than 1%. According to comprehensive research, the organic matter in the sediments mainly originates from marine algae and has high TOC content, which is favorable for the formation of NGH. 相似文献
2.
《地学前缘(英文版)》2023,14(2):101522
The Durkan Complex is a tectonic element of the Makran Accretionary Prism (SE Iran) that includes fragments of Late Cretaceous seamounts. In this paper, the results of map- to micro-scale structural studies of the western Durkan Complex are presented with the aim to describe its structural and tectono-metamorphic evolution. The Durkan Complex consists of several tectonic units bordered by mainly NNW-striking thrusts. Three main deformation phases (D1, D2, and D3) are distinguished and likely occurred from the Late Cretaceous to the Miocene–Pliocene. D1 is characterized by sub-isoclinal to close and W-verging folds associated with an axial plane foliation and shear zone along the fold limbs. This phase records the accretion of fragments of the seamount within the Makran at blueschist facies metamorphic conditions (160–300 °C and 0.6 – 1.2 GPa). D2 is characterized by open to close folds with sub-horizontal axial plane that likely developed during the exhumation of previously accreted seamount fragments. An upper Paleocene – Eocene siliciclastic succession unconformably sealed the D1 and D2 structures and is, in turn, deformed by W-verging thrust faults typical of D3. The latter likely testifies for a Miocene – Pliocene tectonic reworking of the accreted seamount fragments with the activation of out of sequence thrusts. Our results shed light on the mechanism of accretion of seamount materials in the accretionary prisms, suggesting that seamount slope successions favour the localization and propagation of the basal décollement. This study further confirms that the physiography of the subducting plates plays a significant role in the tectonic evolution of the subduction complexes. 相似文献
3.
国内外不少地质学家大都将雅鲁藏布江蛇绿岩带视为印度板块与亚洲板块之间的缝合带。但是,笔者等在喜玛拉雅造山带的东段即仁布-康马一线以东地区的研究却发现,在雅鲁藏布江蛇绿岩带的南侧发育着一个宽大的增生杂岩体,它与雅江蛇绿岩是同一大洋即特提斯喜玛拉雅洋俯冲消减的产物,前者代表着特提斯喜玛拉雅洋消亡遗迹的主体,是印度板块与拉萨地块之间缝合带的主要组成部分;而后者代表的是俯冲带与拉萨地块之间的残余洋壳,它由北向南仰冲,构成日喀则-桑日弧前盆地前缘脊和南部基底,因而其不代表主缝合带。北喜玛拉雅增生杂岩体的发现改变了以Gansser(1964)为代表提出的喜玛拉雅造山带的构造模式,为重新审视印度板块与拉萨地块缝合作用过程提供了一个重要的地质制约和新的研究途径。 相似文献
4.
The structural framework of the Rajang Accretionary Complex is interpreted on the basis of field surveys conducted around the Lupar Fault Zone in southwestern Sarawak. Bedding dips in the Rajang Accretionary Complex are generally southward, while the complex as a whole becomes younger northward. The complex is interpreted as a series of thrust slices formed by accretion at a subduction trench. Each slice forms a unit 10 to 15 km in width. Thrust slices of this order of this order of magnitude are consistent with those formed by accretion processes at modern subduction trenches. It is suggested that accretion of Late Jurassic to Cretaceous oceanic crust occurred initially from the Pacific (eastern) side of Borneo in the Late Cretaceous, forming part of an arc system extending all along the eastern margin of Asia from Japan to Kalimantan. Subsequently, in the Early Tertiary, due to bending of the southern end of the arc system in Borneo, the direction of subduction changed, so that accretion occurred from the north. 相似文献
5.
The mud volcanoes of Pakistan 总被引：1，自引：0，他引：1
Marine-geologic investigations on the Arabian Sea by Bundesanstalt für Geowissenschaften und Rohstoffe (BGR) in 1995 and 1998, and land expeditions in 1998 and 1999 to the coastal regions of the Makran Desert/Pakistan have extended the knowledge of the aerial distribution of mud volcanoes. These structures rise from under-compacted formations within the regional accretionary prism, which is built by the subduction of the oceanic crust of the Arabian Sea and its km-thick sedimentary load. The occurrence of mud volcanoes is limited to the abyssal plain near the accretionary front, to the coastal region of the Makran Desert and to a region in the interior of the Desert to the south to southeast of the so-called Hinglay Synform. The location of mud volcanoes in Pakistan is clearly tied to fault systems. Mud volcanoes are conspicuously absent on the lower slope of the accretionary prism, where thick gas hydrate layers have developed. The presence of large gas plumes emerging from the seafloor landward of the gas hydrate stability zone at water depths of less than 800 m points to a redirection of fluids from depth, which might explain the absence of mud volcanoes along the lower slope. 相似文献
6.
Loren A. Raymond 《International Geology Review》2015,57(5-8):801-823
Accretionary complex histories are broadly understood. Sedimentation in seafloor and trench environments on drifting subducting plates and in associated trenches, followed by (1) deformation and metamorphism in the subduction zone and (2) subsequent uplift at the overriding plate edge, result in complicated stratigraphic and structural sequences in accretionary complexes. Recognizing, defining, and designating individual terranes in subduction complexes clarify some of these complicated relationships within the resulting continent-scale orogenic belts. Terrane designation does not substitute for detailed stratigraphic and structural mapping. Stratigraphic and structural mapping, combined with radiometric and palaeontologic dating, are necessary for delineation of coherent, broken, and dismembered formations, and various mélange units, and for clarification of the details of subduction complex architecture and history. The Franciscan Complex is a representative subduction complex that has evolved through sedimentation, faulting, folding, and low-temperature metamorphism, followed by uplift, associated deformation, and later overprinted deformation. Many belts of Franciscan rocks are offset by strike-slip faults associated with the dextral San Andreas Fault System. In the Franciscan Complex, among the terrane names applied widely, are the ‘Yolla Bolly Terrane’ and the ‘Central Terrane’. Where detailed mapping and detrital zircon ages exist, data reveal that the two names have been applied to rocks of similar general character and age. In the northeastern Diablo Range, Franciscan Complex rocks include coherent units, broken and dismembered formations, and various types of mélanges, all assigned at various times to the Yolla Bolly and other terranes. The details of stratigraphic and structural history revealed by large-scale mapping and radiometric dating prove to be more useful in clarifying the accretionary complex history than assigning a terrane name to the rocks. That history will assist in resolving terrane assignment issues and allow discrimination of subduction-associated and post-subduction events, essential for understanding the overall history of the orogen. 相似文献
7.
Cenozoic geodynamics of the Bering Sea region 总被引：1，自引：0，他引：1
In the Early Cenozoic before origination of the Aleutian subduction zone 50–47 Ma ago, the northwestern (Asian) and northeastern (North American) parts of the continental framework of the Pacific Ocean were active continental margins. In the northwestern part, the island-arc situation, which arose in the Coniacian, remained with retention of the normal lateral series: continent-marginal sea-island arc-ocean. In the northeastern part, consumption of the oceanic crust beneath the southern margin of the continental Bering shelf also continued from the Late Cretaceous with the formation of the suprasubduction volcanic belt. The northwestern and northeastern parts of the Paleopacific were probably separated by a continuation of the Kula-Pacific Transform Fracture Zone. Change of the movement of the Pacific oceanic plates from the NNW to NW in the middle Eocene (50–47 Ma ago) was a cause of the origin of the Aleutian subduction zone and related Aleutian island arc. In the captured part of the Paleopacific (proto-Bering Sea), the ongoing displacement of North America relative to Eurasia in the middle-late Eocene gave rise to the formation of internal structural elements of the marginal sea: the imbricate nappe structure of the Shirshov Ridge and the island arc of the Bowers Ridge. The Late Cenozoic evolution was controlled by subduction beneath the Kamchatka margin and its convergence with the Kronotsky Terrane in the south. A similar convergence of the Koryak margin with the Goven Terrane occurred in the north. The Komandorsky minor oceanic basin opened in the back zone of this terrane. Paleotectonic reconstructions for 68–60, 56–52, 50–38, 30–15, and 15–6 Ma are presented. 相似文献
8.
The eastern segment of Central Asian Orogenic Belt underwent not only a long evolution history related to the Paleo-Asian Ocean during Paleozoic but also the tectonic overprinting by the westward subduction of Paleo-Pacific Ocean crust during Mesozoic. When the subduction of Paleo-Pacific Ocean crust started has been long debated issue for understanding the tectonic evolution of the eastern Asian continental margin. The eastern margin of the Jimusi Block (Wandashan Terrane) preserved complete records for the accretionary process of the westward subduction of Paleo-Pacific Ocean crust. Comprising the Yuejinshan Complex and Raohe Accretionary Complex (RAC), the Wandashan Terrane is located in the eastern margin of Jiamusi Block, NE China, and is considered to be an accretionary wedge of the westward subducting oceanic crust. To reconstruct the marginal accretion processes of the Jiamusi Block, the structural deformation of the Wandashan Terrane was investigated in the field and the geochronology of the Dalingqiao and Yongfuqiao formations were studied, which were formed syn-and-post RAC accretion respectively. The Yuejinshan and Raohe complexes were discontinuously accreted to the eastern margin of the Jiamusi Block. Contrary to the previous consideration of the Late Triassic to Early Jurassic, this study suggests that the Yuejianshan Complex in southwest Wandashan Terrane probably accreted from Late Carboniferous to Middle Permian, which was driven by unknown oceanic crust subduction existing to the east (present position) of the Jiamusi Block at that time. The siltstones of the Dalingqiao Fm. yield the youngest zircon U-Pb age of 142 ± 2 Ma, indicating the emplacement of the RAC not earlier than the Late Jurassic. Thus, the RAC might start to accrete from the Jurassic and emplace during 142–131 Ma, resulted from the Paleo-Pacific subduction which started from the Late Triassic to Early Jurassic. 相似文献
9.
The lateral variability of structural elements in the collision zone of the Cretaceous-Paleocene Achaivayam-Valagin island arc with the northeastern Asian margin is considered. The similarity and difference of Eocene collision structural elements in the north and the south of Kamchatka are shown. In northern Kamchatka, the continent-arc boundary is traced along the Lesnaya-Vatyn Thrust Fault, which completed its evolution about 45 Ma ago. The thin, near-horizontal allochthon of this thrust, composed of island-arc rocks, overlies the deformed but unmetamorphosed terrigeneous sequences of the Asian margin. The general structure of this suture in the Kamchatka Isthmus and southern Koryakia is comparable with the uppermost subduction zone, where a thin lithospheric wedge overlaps intensely deformed sediments detached from the plunging plate. In southern Kamchatka (Malka Uplift of the Sredinny Range), the arc-continent collision started 55–53 Ma ago with thrusting of island-arc complexes over terrigenous rocks of continental margin. However, the thickness of the allochthon was much greater than in the north. Immediately after this event, both the autochthon and lower part of allochthon were deformed and subsided to a significant depth. This subsidence gave rise to metamorphism of both the autochthon (Kolpakov and Kamchatka groups, Kheivan Formation) and lower allochthon (Andrianovka and Khimka formations). The anomalously fast heating of the crust was most likely related to the ascent of asthenospheric masses due to slab breakoff, when the Eurasian Plate was plunging beneath the Achaivayam-Valagin arc. 相似文献
10.
A. Deif I. El-Hussain K. Al-Jabri N. Toksoz S. El-Hady S. Al-Hashmi K. Al-Toubi Y. Al-Shijbi M. Al-Saifi 《Arabian Journal of Geosciences》2013,6(12):4947-4960
The Sultanate of Oman forms the southeastern part of the Arabian plate, which is surrounded by relatively high active tectonic zones. Studies of seismic risk assessment in Oman have been an important on-going socioeconomic concern. Using the results of the seismic hazard assessment to improve building design and construction is an effective way to reduce the seismic risk. In the current study, seismic hazard assessment for the Sultanate of Oman is performed through the deterministic approach with particular attention on the uncertainty analysis applying a recently developed method. The input data set contains a defined seismotectonic model consisting of 26 seismic zones, maximum magnitudes, and 6 alternative ground motion prediction equations that were used in four different tectonic environments: obduction zone earthquake (Zagros fold thrust belt), subduction zone earthquakes (Makran subduction zones), normal and strike-slip transform earthquakes (Owen and Gulf of Aden zones), and stable craton seismicity (Arabian stable craton). This input data set yielded a total of 76 scenarios at each point of interest. A 10 % probability that any of the 76 scenarios may exceed the largest median ground acceleration is selected. The deterministic seismic hazards in terms of PGA, 5 % damped spectral acceleration at 0.1, 0.2, 1.0 and 2.0 s are performed at 254 selected points. The ground motion was calculated at the 50th and 84th percentile levels for selected probability of exceeding the median value. The largest ground motion in the Sultanate of Oman is observed in the northeastern part of the country. 相似文献
11.
Edoardo Barbero Luca Pandolfi Morteza Delavari Asghar Dolati Emilio Saccani Rita Catanzariti Valeria Luciani Marco Chiari Michele Marroni 《地学前缘(英文版)》2021,12(3):101106
The Durkan Complex is a key tectonic element of the Makran accretionary prism (SE Iran) and it has been interpreted as representing a continental margin succession. We present here a multidisciplinary study of the western Durkan Complex, which is based on new geological, stratigraphic, biostratigraphic data, as well as geochemical data of the volcanic and meta-volcanic rocks forming this complex. Our data show that this complex consists of distinct tectonic slices showing both non-metamorphic and very low-grade metamorphic deformed successions. Stratigraphic and biostratigraphic data allow us to recognize three types of successions. Type-I is composed by a Coniacian – early Campanian pelagic succession with intercalation of pillow lavas and minor volcaniclastic rocks. Type-II succession includes a volcanic sequence passing to a volcano-sedimentary sequence with Cenomanian pelagic limestones, followed by a hemipelagic sequence. This succession is characterized by abundant mass-transport deposits. Type-III succession includes volcanic and volcano-sedimentary sequences, which are stratigraphically covered by a Cenomanian platform succession. The latter is locally followed by a hemipelagic sequence. The volcanic rocks in the different successions show alkaline geochemical affinity, suggesting an origin from an oceanic within-plate setting. Our new results indicate that the western Durkan Complex represents fragments of seamounts tectonically incorporated in the Makran accretionary wedge during the latest Late Cretaceous–Paleocene. We propose that incorporation of seamounts in the frontal prism caused a shortening of the whole convergent margin and possibly contributed to controlling the deformation style in the Makran Accretionary Wedge during Late Cretaceous–Paleocene times. 相似文献
12.
The Mw 7.7 earthquake that struck SE Pakistan on 24 September 2013 at 11.29.48 UTC was a sinistral strike-slip event on a branch of the Ornach-Nal-Chaman fault system which hereabouts separates the Eurasian Plate from the Indian Plate. Although the focus was at a depth of 15 km and 400 km inland the earthquake was accompanied by the emergence of an island off the Makran coast and the generation of a tsunami with a peak amplitude of 27 cm at Muscat (Oman) and 20 cm at Chah Bahar (Iran). At DART marine buoy 23228 in the Indian Ocean 500 km to the south a series of seismic Rayleigh waves about 4 min after the main shock was followed 54 min later by a tsunami with a peak amplitude of 1 cm. The Rayleigh series is here attributed to seafloor vibration during accelerated subduction of the Arabian Plate beneath the Eurasian Plate, and the tsunami to the development or reactivation of one or more reverse faults on the seaward portion of the Makran imbricate fan. As in the 2010.2.27 Mw 8.8 Maule (Chile), the 2004.12.26 Mw 9.2 Sumatra–Andaman, the 2005.3.28 Mw 8.7 Nias (Indonesia) and the 2011.3.11 Mw 9.0 Tohoku (Japan) earthquakes, the link between tsunami generation and slip on the megathrust is thus very indirect, to the detriment of attempts to mitigate coastal hazards using teleseismic data when nearshore seafloor monitoring would probably prove more effective. 相似文献
13.
Arslan Muhammad Kaminski Michael A. Tawabini Bassam S. Ilyas Muhammad Frontalini Fabrizio 《Arabian Journal of Geosciences》2016,9(4):1-22
The Uromia–Dokhtar Magmatic Arc (UDMA) is a northwest–southeast trending magmatic belt which is formed due to oblique subduction of Neotethys underneath Central Iran and dominantly comprises magmatic rocks. The Jebal-e-Barez Plutonic Complex (JBPC) is located southeast of the UDMA and composed of quartz diorite, granodiorite, granite, and alkali granite. Magmatic enclaves, ranging in composition from felsic to mafic, are abundant in the studied rocks. Based on the whole rock and mineral chemistry study, the granitoids are typically medium-high K calc-alkaline and metaluminous to peraluminous that show characteristics of I-type granitoids. The high field strength (HFS) and large ionic radius lithophile (LIL) element geochemistry suggests fractional crystallization as a major process in the evolution of the JBPC. The tectonomagmatic setting of the granitoids is compatible with the arc-related granitic suite, a pre-plate collision granitic suite, and a syncollision granitic suite. Field observations and petrographic and geochemical studies suggest that the rocks in this area are I-type granitoids and continental collision granitoids (CCG), continental arc granitoids (CAG), and island arc granitoid (IAG) subsections. The geothermobarometry based on the electron probe microanalysis of amphibole, feldspars, and biotite from selected rocks of JBPC implies that the complex formed at high-level depths (i.e., 9–12 km; upper continental crust) and at temperatures ranging from 650 to 750 °C under oxidation conditions. It seems that JBPC is located within a shear zone period, and structural setting of JBPC is extensional shear fractures which are product of transpression tectonic regime. All available data suggested that these granitoids may be derived from a magmatic arc that was formed by northeastern ward subduction of the Neotethyan oceanic crust beneath the Central Iran in Paleogene and subsequent collision between the Arabian and Iranian plates in Miocene.
相似文献14.
I. El-Hussain Y. Al-Shijbi A. Deif A. M. E. Mohamed M. Ezzelarab 《Arabian Journal of Geosciences》2018,11(15):435
A seismic source model is developed for the entire Arabian Plate, which has been affected by a number of earthquakes in the past and in recent times. Delineation and characterization of the sources responsible for these seismic activities are crucial inputs for any seismic hazard study. Available earthquake data and installation of local seismic networks in most of the Arabian Plate countries made it feasible to delineate the seismic sources that have a hazardous potential on the region. Boundaries of the seismic zones are essentially identified based upon the seismicity, available data on active faults and their potential to generate effective earthquakes, prevailing focal mechanism, available geophysical maps, and the volcanic activity in the Arabian Shield. Variations in the characteristics given by the above datasets provide the bases for delineating individual seismic zones. The present model consists of 57 seismic zones extending along the Makran Subduction Zone, Zagros Fold-Thrust Belt, Eastern Anatolian Fault, Aqaba-Dead Sea Fault, Red Sea, Gulf of Aden, Owen Fracture Zone, Arabian Intraplate, and a background seismic zone, which models the floating seismicity that is unrelated to any of the distinctly identified seismic zones. The features of the newly developed model make the seismic hazard results likely be more realistic. 相似文献
15.
《Journal of African Earth Sciences》2000,30(1):149-168
A petrological model for the upper mantle and lower crust under the northern part of the Arabian Plate (Syria) has been derived on the basis of petrology of upper mantle and lower crustal xenoliths occurring in the Neogene to Quaternary alkali basalts of the Shamah volcanic fields. The xenolith suite has been classified by texture mineralogy and chemistry into the following groups: (1) Type I metasomatised and dry Cr diopside xenoliths with protogranular to porphyroclastic textures; (2) Type II Al augite spinal and garnet pyroxenite and websterite which have igneous and/or porphyroclastic textures and abundant phlogopite and/or amphibole; (3) Cr-poor megacrysts; and (4) mafic lower crustal xenoliths. Estimates of Type I xenolith temperatures are 990–1070°C with pressure between 13 and 19 kbar. Type II xenoliths yield temperatures of 930–1150°C and pressures in the range 12—13 kbar. The lower crustal xenolith mineral assemblages and geothermometry based on coexisting minerals suggest equilibration conditions between 6 and 8 kbar and 820–905°C. Mantle plumes, which may be the source of the volatile flux, have implications for melt generation in the Arabian basalt provinces. It is estimated that the lithosphere beneath the Arabian Plate is less than 80 km thick. Xenolith data and geophysical studies indicate that the Moho is located at a depth of 40–37 km and that the crust-mantle transition zone has a thickness of 8–5 km and occurs at a depth of 27–30 km. The boundary between an upper granitic crust and a lower mafic crust occurs at a depth of 19 km. Type I dry xenoliths show a low overall concentration of REE (La/Yb =1–2 and Sm = 0.7–1.1 times chondrite), whereas Type I hydrous xenoliths are LREE enriched (La/Yb=6–9 and Sm=1.1–1.3 times chondrite). Type II xenoliths show high overall LREE enrichment. Petrological and geochemical data for the lower crustal xenoliths indicate that these xenoliths represent basaltic cumulates crystallised at lower crustal pressures. 相似文献
16.
那丹哈达增生杂岩为中国东部古太平洋板块俯冲最为可靠的地质记录之一,对限定古大洋板块的西向俯冲具有重要的理论意义.饶河杂岩位于那丹哈达增生杂岩的核心位置,发育典型的增生杂岩组合,其中玄武岩类多呈构造透镜体状产出于超镁铁质-镁铁质杂岩带,变形轻微,没有遭受变质.对饶河杂岩中枕状玄武岩样品进行的同位素年代学和地球化学研究结果表明：饶河杂岩中枕状玄武岩锆石LA-ICP-MS U-Pb年龄为中侏罗世（168±2 Ma）,枕状玄武岩大离子亲石元素Rb、Sr亏损,高场强元素Nb、Ta富集,Th元素丰度较高,形成于洋岛（OIB型）环境.饶河杂岩中枕状玄武岩的形成时代和成因环境,对于该区侏罗纪时期构造动力学背景研究具有意义. 相似文献
17.
藏南吉隆地区眼球状片麻岩是大喜马拉雅结晶岩系的一部分,其矿物组成为石英、斜长石、钾长石、黑云母和少量的白云母。片麻岩中的锆石具有核边结构,由继承碎屑锆石核和具有同心环带结构的岩浆锆石边组成,SHRIMP U Pb测年显示,边部岩浆锆石加权平均年龄为（4989±44） Ma,表明片麻岩的原岩为早古生代的花岗岩,εHf加权平均值为-83±095,暗示片麻岩原岩为壳源,可能是印度大陆北部地壳部分熔融的产物。文中和现有的地质年代学数据表明,喜马拉雅造山带是一个复合造山带,经历了早古生代的造山作用,早古生代的喜马拉雅造山带是原特提斯洋向冈瓦纳大陆北缘俯冲的结果,是冈瓦纳大陆拼合之后在其边缘形成的安第斯型造山带,而不属于冈瓦纳超大陆聚合过程中陆陆碰撞形成的泛非造山带的一部分。 相似文献
18.
In northeastern Sanandaj-Sirjan structural zone, the Takab-Ghorveh belt comprises a volcanic province which related to the collision between the Eurasian and Arabian continents. It contains almost Quaternary andesitic basalt to alkali basalt. These alkali basaltes show Strombolian type eruptions. The volcanic rocks in Bijar area represent a range of mafic magmas, re-vealed by mingling and mixing textures. A variety of features suggest that the lava flows before eruption from magma chambers, contaminated by continental crust. 相似文献
19.
Shuguang Chen Xiaofeng Liu Yongqian Cui Xianzheng Zhao Jianli Zhang 《International Geology Review》2017,59(3):259-273
Based on the new all-covering 3D seismic data and the drilling-logging data, we established the sequence stratigraphic framework for Dongying Depression and identified two kinds of structural systems in Palaeogene, i.e. the extensional structural system and the transtensional structural system. The extensional structural system consists of different normal faults that predominantly trend NE, EW, and NW. The attitudes of the normal faults vary in different tectonic settings. However, the transtensional structural system consists of some strike–slip faults and some normal faults. According to the analysis of the relationships between the faults and the sedimentary sequences of Dongying Depression, we considered that the extensional structural system was developed mainly from the Palaeocene to the middle Eocene, whereas the transtensional structural system was mostly developed from the middle Eocene to the Oligocene. In addition, we found that the structural systems had transformed since 43.5 Ma, when the subduction direction and activity rates of the Pacific Plate changed and the dextral strike–slip movement of the large-scale Tanlu fault zone started from eastern China. The extensional structural deformation was probably derived from the back-arc extension triggered by subduction rollback of the Pacific Plate under the Eurasian Plate, whereas the transtensional structural deformation was probably related to the regional dextral strike–slip movement induced by the subduction of the Pacific Plate and the continents’ collision between the Indian Plate and the Eurasian Plate. 相似文献
20.
New geological observations, recent published data and U–Pb SHRIMP zircon dating from the Karakoram Mountains along the Nubra and Shyok Rivers reveal that the initial subduction of the Tethyan oceanic lithosphere took place ~ 110 Ma beneath the Paleozoic–Mesozoic platform of the southern edge of the Asian Plate. This has produced the I-type plutons within the Karakoram Batholith Complex, well before the juxtaposition of the Asian Plate along the Karakoram Shear Zone. Within this shear zone, U–Pb zircon crystallisation ages of ~ 75 Ma from mylonitised granitoids and 68 Ma from undeformed Tirit granodiorite constrain the timing of suturing of the Karakoram terrain with the Trans-Himalaya between 75 and 68 Ma. Post-shearing leucogranite was episodically generated within frontal migmatised Karakoram Metamorphic Belt and emplaced between 20 and 13 Ma within the shear zone. Presence of a low resistivity zone as a possible indication of mid-crustal partial molten crust underneath the Higher Himalaya–Ladakh–Karakoram terrains manifests the impingement of the Indian Plate along the Main Himalayan Thrust at depth.
Physical continuity of the Baltoro granite belt into the Karakoram Batholith is established as well as the continuity of the Shyok suture as the Shiquanhe Suture Zone in western Tibet through the Chushul–Dungti sector. The Karakoram Shear Zone, therefore, displays a complex geological history of movements since ~ 75 Ma and plays a very significant role in the overall India–Asia convergence, rather than merely being a strike-slip fault for eastward extrusion of a segment of Asia in Tibet. 相似文献