共查询到20条相似文献，搜索用时 484 毫秒
1.
金属矿床地质的发展——纪念《矿床地质》创刊十周年 总被引：6，自引：1，他引：6
矿床知识来自矿业。有关矿石成因的争论曾引导到野外现场实际观察的良好趋向。20世纪中叶以来,先后应用先进的设备仪器以及如同位素和流体包裹体等对矿床进行研究;这不仅扩大了成矿作用的视野,而且更加深入洞察矿石的习性。然而,有关矿石成因与来源问题的争论仍在继续;不过进入了更深的层次。欲探索矿石形成的客观规律,最合理的方法是结合野外的现场观察进行室内的仔细研究。 相似文献
2.
阿尔玛雷克斑岩铜矿地质特征：——矿床地质特征 总被引：3，自引：0，他引：3
阿尔玛雷克斑岩铜矿包括了两个超大型矿床、一个大型矿床和一个中型矿床。矿田内４条主断裂切割成５个构造断块，矿床产于西部和东部上升断块中，含矿岩体为海西中晚期中本乡性复式岩体，成矿与晚期富碱高钾浅成花岗闪长斑岩有关，具有成矿元素高含量和低Ｌｉ、Ｒｂ、Ｃｓ含量的特点。矿床具有良好的蚀变－矿化分带特征，矿石中高钾钠比值说明矿化 富集与钾质交代关系密切。 相似文献
3.
5.
6.
7.
8.
阿尔玛雷克斑岩铜矿地质特征：区域成矿地质背景 总被引：1，自引：0，他引：1
阿尔玛雷克斑岩铜矿是乌兹别克斯坦共和国最大的铜矿床，也是世界上著名的超大型铜矿。它产于地壳深部地幔隆起区和地幔幼陷区过渡带，康氏面和费氏面隆起区边缘，前苏联中天山地地槽褶皱带中间地块南缘加里东－海构造－岩浆活化带东段，具多期构造－岩浆强烈活化特点。区域内正交断裂体系和斜交断裂体系强烈发育，并控制差区域矿产分布；区内加里东期和海西期岩浆活动强烈，而海西中、晚期广泛发育的富碱的安山岩－英安岩－流纹岩火 相似文献
9.
11.
A Barremian microflora is recorded in the terrigenous facies (Weald) of the Lower Cretaceous in the northern region of the Province of Valencia (Spain), these beds have been poorly dated up to now due to the absence of fossils. The Villar del Arzobispo microflora correspond unquestionably to the Barremian-Aptien period, but the numerical importance of derived forms from the Jurassic, the remarkable variety of forms of Cicatricosisporites, and the rareness of pollen of Angiosperms, indicate a Barremian age to be more likely.This discovery permits us to establish the stratigraphical relationship of this terrigenousfacies of Villar del Arzobispo with the dated “Weald” of other areas of the Iberian Chain and to give a complete chrono-stratigraphical interpretation to the different litho-stratigraphical units that constitute the Lower Cretaceous of this region. 相似文献
12.
苏皖坡缕石粘土中蛋白石特征及其成因意义 总被引：1，自引：0，他引：1
TEM和XRD研究表明，在苏皖坡缕石粘土矿床的蛋白石坡缕石层中存在0pal-A和0pal-CT两种结构的蛋白石。蛋白石坡缕石层主要含坡缕石、opal-A、opal-CT，以及少量白云石和其它矿物，由富opal-A层和富opal-CT层互层组成，交互层的厚度在几个厘米左右。蛋白石坡缕石层中的矿物基本是自生矿物，从蒸发湖水中化学沉淀形成。矿物组成特征研究表明，蛋白石坡缕石层的矿物组分(Si、Mg、Al)来源于盆地周围玄武岩淋滤的浅层地下水。根据Opal-A和Opal-CT溶解度图解和城缕石、白云石形成物理化学条件图解，当湖水具有高浓度溶解SiO2和Mg^2 时，有利于opal-A和坡缕石形成，当湖水具有低浓度溶解SiO2时，有利于opal-CT结晶。因此，沉淀SiO2的结构状态取决于地下水补给的湖水溶解SiO2浓度。富opal-A和富opal-CT交互层的形成是古气候、古水文周期性变化的指示。富opal-CT层指示高地下水补给流入量，低蒸发量，湖水低盐度和溶解组分，代表湿润气候时期；而富opal-A层代表低地下水补给流入量，高蒸发量，高溶解组分浓度，代表干旱气候时期。 相似文献
13.
Summary Finite element analyses were conducted to investigate the magnitude of tensile strains imposed on landfill liners due to the
formation of subsurface cavities. The study incorporated the significance of using geogrids to reduce the magnitude of strains
and possibly the potential for collapse of landfill liners. Variations of key parameters included depth of overburden (D) and diameter of the cavity (B). Estimated stress distributions were compared to theoretical values obtained from a model reported in the literature.
Results indicated that, contrary to conventional wisdom, the critical area based on the mechanics of arching was above the
edge of the cavity where stress concentration occurred. Incorporation of geogrid reinforcement reduced the magnitude of tensile
strains. The tensile force in the geogrid was dependent upon the size of the cavity, the depth of the overburden, and the
applied pressure. 相似文献
14.
This paper concerns the evaporite units, depositional systems, cyclicity, diagenetic products and anhydritization patterns of the Calatayud Basin (nonmarine, Miocene, central Spain). In outcrop, the sulphate minerals of these shallow lacustrine evaporites consist of primary and secondary gypsum, the latter originating from the replacement of anhydrite and glauberite. In the evaporative systems of this basin, gypsiferous marshes of low salinity can be distinguished from central, saline lakes of higher salinity. In the gypsiferous marsh facies, the dominant, massive, bioturbated gypsum was partly replaced by synsedimentary chert nodules and siliceous crusts. In the saline lake facies, either cycles of gypsiferous lutite‐laminated gypsarenite or irregular alternations of laminated gypsum, nodular and banded glauberite, thenardite and nodular anhydrite precipitated. Early replacement of part of the glauberite by anhydrite also occurred. Episodes of subaerial exposure are represented by: (1) pedogenic carbonates (with nodular magnesite) and gypsiferous crusts composed of poikilitic crystals; and (2) nodular anhydrite, which formed in a sabkha. Additionally, meganodular anhydrite occurs, which presumably precipitated from ascending, highly saline solutions. The timing of anhydritization was mainly controlled by the salinity of the pore solutions, and occurred from the onset of deposition to moderate burial. Locally, a thick (>200 m) sequence of gypsum cycles developed, which was probably controlled by climatic variation. A trend of upward‐decreasing salinity is deduced from the base to the top of the evaporite succession. 相似文献
15.
Alan M. Jacobs 《Mathematical Geology》1971,3(3):227-238
Relative percentages of sand, silt, and clay from samples of the same till unit are not identical because of different lithologies in the source areas, sorting in transport, random variation, and experimental error. Random variation and experimental error can be isolated from the other two as follows. For each particle-size class of each till unit, a standard population is determined by using a normally distributed, representative group of data. New measurements are compared with the standard population and, if they compare satisfactorily, the experimental error is not significant and random variation is within the expected range for the population. The outcome of the comparison depends on numerical criteria derived from a graphical method rather than on a more commonly used one-way analysis of variance with two treatments. If the number of samples and the standard deviation of the standard population are substituted in at-test equation, a family of hyperbolas is generated, each of which corresponds to a specific number of subsamples taken from each new sample. The axes of the graphs of the hyperbolas are the standard deviation of new measurements (horizontal axis) and the difference between the means of the new measurements and the standard population (vertical axis). The area between the two branches of each hyperbola corresponds to a satisfactory comparison between the new measurements and the standard population. Measurements from a new sample can be tested by plotting their standard deviation vs. difference in means on axes containing a hyperbola corresponding to the specific number of subsamples used. If the point lies between the branches of the hyperbola, the measurements are considered reliable. But if the point lies outside this region, the measurements are repeated. Because the critical segment of the hyperbola is approximately a straight line parallel to the horizontal axis, the test is simplified to a comparison between the means of the standard population and the means of the subsample. The minimum number of subsamples required to prove significant variation between samples caused by different lithologies in the source areas and sorting in transport can be determined directly from the graphical method. The minimum number of subsamples required is the maximum number to be run for economy of effort. 相似文献
16.
17.
1 IntroductionThe term“Environmental Geochemical Baseline(EGB)”first appeared in the International Geochemi-cal Mapping Program (IGCP259) and the InternationalGeochemical Baseline Program (IGCP360) of Interna-tional Geography Contrast Program. The defin… 相似文献
18.
Discontinuities such as fractures or cracks are common in geo-materials. Connectivity is a comprehensive parameter that includes the influence of length, orientation and density of the discontinuities. The main objectives of this paper are to define connectivity based on the statistical geometrical parameters of a network of random discontinuities and to quantify the hydraulic properties of the network using connectivity. An analytical method is first proposed to evaluate connectivity through the density of degree of freedom (DDOF). The analytically estimated DDOF is verified using numerical analysis. DDOF increases with the increases in the mean length, relative orientation and density of the random discontinuity network. Connectivity becomes better and the permeability becomes larger with increasing DDOF. The representative element volume (REV) of a random discontinuity network can be estimated based on connectivity. When a discontinuity network is poorly connected, a REV does not exist when the size of the discontinuity network is smaller than 10 times of the mean length of the discontinuities. When a discontinuity network is normally connected, a REV exists when the REV size is smaller than 10 times of the mean length of the discontinuities. When the discontinuity network is highly connected, the REV size is only 2–4 times of the mean length of the discontinuities. The results indicate that DDOF is a good indicator to quantify the connectivity of a random discontinuity network and the relationship between connectivity and permeability. 相似文献
19.
利用孔隙度和渗透率参数,将陕西定边张韩区块油藏储层分为4类流动单元.分析各流动单元的物性特征,阐明不同级别流动单元分布特点及其与沉积微相的关系,获得各类流动单元物性特征参数. 相似文献
20.
Jan Drzymala Janusz Kapusniak Piotr Tomasik 《International Journal of Mineral Processing》2003,70(1-4):147-155
Potato starch and dextrins resulting from thermolysis of potato starch in the absence of reagents and presence of
-amino acids are promising depressants for separation of lead and copper minerals present in the Polish industrial copper concentrates. The polysaccharides were used for differential xanthate flotation of the final industrial concentrates produced by flotation with sulfhydryl collectors in the absence of depressants. The polysaccharides depressed galena and provided froth concentrate rich in chalcocite and other copper minerals as well as cell product containing lead minerals. The best results of separation were obtained in the presence of plain dextrin prepared by a thermal degradation of potato starch. The industrial concentrate containing 18.5% Cu and 5.5% Pb was divided into a froth product containing 38.1% Cu with 77% recovery of copper and a cell product assaying 7.3% Pb with 83% recovery of lead. It was accomplished using 2500 g/t of dextrin, 50g/t of potassium ethyl xanthate, and 50 g/t of frother (α-terpineol). The pH of flotation was 8.0–8.2. 相似文献