共查询到20条相似文献，搜索用时 78 毫秒
1.
北祁连中段加里东俯冲－增生杂岩/火山弧带及其变形特征 总被引：16，自引：0，他引：16
分布于北祁连造山带中段的加里东期俯冲－增生杂岩／火山弧带可划分为托莱山俯冲杂岩带和走廊南山增生杂岩／火山弧带两个亚带。前者主要由蛇绿岩、蛇绿混杂岩及深海复理石组成，为古祁连洋俯冲作用后期由于岛弧的阻力在浅部刨铲作用的产物；后者由不完整的蛇绿岩透镜体、高压变质岩、弧火山岩及一些变质碎屑岩等组成，反映古祁连洋不断向北俯冲，火山弧前锋南移，增生杂岩不断增厚且在其下部发生板底垫托作用以及海沟不断向南倒退的复杂演化历史。俯冲－增生杂岩在加里东期共经历三期变形作用（Ｄ＿１、Ｄ＿２、Ｄ＿３）。Ｄ＿１、Ｄ＿２为简单剪切变形机制，反映从Ｎ向Ｓ的逆冲方向。Ｄ＿３为压扁型变形机制，代表走廊南山古岛弧与中祁连地块碰撞时的挤压变形。 相似文献
2.
北祁连山俯冲杂岩带的构造演化 总被引：76，自引：2，他引：76
北祁连位位于华北克拉西部阿拉善地块与中祁连－柴达木泛地块之间是我国最具特色的大陆造山带之一。带内发育有震旦纪－中寒武世的裂谷火山岩，晚寒武世－奥陶纪蛇绿岩，中晚奥陶世岛弧火山岩，晚奥陶世弧后拉张盆地火山－沉积岩，志留纪残余海盆相复理石和泥盆纪山间磨粒石等，中间夹两条变质和变形特征不同的加里东期俯冲杂岩带；南带为深层俯冲，北带为浅层俯冲杂岩；这两条杂岩石可能形成于同一俯冲带的不同深度，俯冲杂岩带中岩 相似文献
3.
4.
柴达木北缘超高压变质带形成与折返的时限及机制 总被引：49，自引：7，他引：42
位于青藏高原北缘的祁连山加里东造山带的形成是阿拉善板块、祁连微板块及柴达木一东昆仑板块在加里东期间汇聚和碰撞的结果。祁连微板块和柴达木一东昆仑板块之间的柴(达木)北缘超高压变质带形成于495～440Ma,是继南祁连洋壳向北俯冲于祁连微板块下形成增生的柴北缘火山岛弧带之后,陆壳深俯冲的产物。柴北缘超高压变质带是在祁连微板块及柴达木一东昆仑板块之间的“正向陆内俯冲”向“斜向陆内俯冲”转化过程中“斜向挤出”机制下折返的,开始折返年龄为470～460Ma,最后的折返时间为400～406Ma。折返构造很好地保存在超高压变质岩石中,并且记录了广泛的退变质作用。 相似文献
5.
青藏高原中的古特提斯体制与增生造山作用 总被引：28，自引：12，他引：16
青藏高原古特提斯体系的特征表现为古特提斯洋盆中多条状地体的存在,多俯冲、多岛弧增生体系的形成和多地体汇聚、碰撞造山的动力学环境,其构架包括4条代表古特提斯洋壳残片的蛇绿岩或蛇绿混杂岩(昆南-阿尼玛卿蛇绿岩带、金沙江-哀牢山-松马蛇绿岩带、羌中-澜沧江-昌宁-孟连蛇绿岩带和松多蛇绿岩带)、5条火山岩浆岛弧带(布尔汗布达岛弧岩浆带、义敦火山岩浆岛弧带、江达-绿春火山岛弧带、东达山-云县火山岛弧带和左贡-临沧岛弧-碰撞岩浆带)、4个陆块或地体(松潘-甘孜地体、羌北-昌都-思茅地体、羌南-保山地体)、3条洋壳深俯冲形成的高压-超高压变质带(金沙江得荣高压变质带、龙木错-双湖高压变质带、松多高(超)压变质带),以及5条弧前增生楔或增生杂岩(西秦岭增生楔、巴颜喀拉-松潘-甘孜增生楔、金沙江增生楔、双湖-聂荣-吉塘-临沧增生楔、松多增生杂岩)。古特提斯洋盆的俯冲增生造山作用普遍存在于青藏高原古特提斯复合造山体中,构成与多条古特提斯蛇绿岩带(缝合带)相伴随的俯冲增生杂岩带(链)。古特提斯俯冲增生杂岩带包括由弧前强烈变形的沉积增生楔、以及高压变质岩、岛弧岩浆岩、蛇绿岩和外来岩块组成的混杂体,代表在洋盆俯冲过程中的活动陆缘的地壳增生。 相似文献
6.
早古生代原特提斯洋在祁连造山带的分支本文称为古祁连洋。其洋内及邻区存在中祁连、阿拉善、柴达木、华北、扬子、塔里木等多个陆块、微陆块,处在一个复杂的多岛洋的环境中。祁连地区早古生代经历了较为复杂的俯冲拼合、碰撞造山过程。本文探讨了祁连造山带的几个构造单元构造属性,认为早古生代阿拉善微陆块南缘为被动大陆边缘,中祁连北缘为活动大陆边缘。阿拉善南部与之平行的龙首山构造单元为俯冲造山形成的增生楔体;北祁连构造带为一套俯冲增生杂岩,包含高压变质岩带、蛇绿岩带、岛弧岩浆和部分洋壳残片等,记录了古祁连洋壳从大陆裂解,洋壳形成,俯冲拼合,碰撞造山的造山过程。495Ma左右南祁连南部柴达木微陆块向北俯冲的影响,古祁连洋壳俯冲受阻,俯冲带向北后退,形成大岔大坂岛弧。弧前地区发生洋-洋俯冲事件,堆积增生大岔大坂、白泉门、九个泉等SSZ型北祁连蛇绿岩北带,并伴随第二期清水沟、牛心山、野牛滩等地岩浆事件。460Ma左右阿拉善微陆块和中祁连微陆块开始碰撞拼合,古祁连洋开始闭合。值得注意的是拼合过程不是均一的,存在自西向东斜向"剪刀式"的拼合方式,产生了由西向东年代变新的"S"型同碰撞岩浆岩。约440Ma古祁连洋闭合,进入陆内造山阶段。440Ma之后,拼合陆块处在一种拉伸的构造环境之下,金佛寺、牛心山、老虎山等地产生碰撞后岩浆岩。422~406Ma发生俯冲折返、高压榴辉岩和高压低温蓝片岩退变质作用,形成以紧闭不对褶皱为特征的第二幕变形。根据各陆块、微陆块碎屑锆石年龄谱分析对比,中祁连基底应与华北不同,而可能与扬子有关。Rodinia超大陆聚合之前,中祁连微陆块作为一个独立的微陆块与华北、扬子保持一定距离。1.0~0.8Ga Rodinia超大陆聚合过程中祁连微陆块与冈瓦纳北缘拼贴在一起,而距华北较远。随着Rodinia超大陆裂解,中祁连微陆块远离冈瓦纳,逐渐向华北靠近,500~400Ma原特提斯洋闭合,华北、阿拉善与中祁连拼合,并整体拼合到冈瓦纳大陆北缘。 相似文献
7.
8.
北祁连造山带东段白银地区的构造单元划分及韧性变形 总被引：15，自引：0，他引：15
北祁连造山带东段的白银地区可划分出四个构造单元（Ｂ１、Ｂ２、Ｂ３和Ｂ４）：Ｂ１属于中宫变质地块，Ｂ２为古祁洋在俯冲过程中形成的增生杂岩，Ｂ３属于加里东期的古火山岛弧Ｂ４为弧后残余海盆。本区存在两期韧性变形，和线期韧性变形以形成近垂直于造山带的ＮＥ－ＳＷ向拉伸线理为特征，剪切标志显示其主要为一系列从Ｎ－Ｓ的逆冲叠覆构造２，与古祁连洋向北的俯冲作用有关，第二期韧性变形形成四条韧性平移剪切带（ＳＺ１、Ｓ 相似文献
9.
祁连西段龚岔口地区榴闪岩的高压变质作用及其地质意义 总被引：1，自引：0，他引：1
在中祁连中新元古代的被动陆缘与野马南山构造单元结合部位的构造混杂岩带中发现了榴闪岩，对榴闪岩的岩石组合及其主要矿物进行了研究，认为该变质带是在约381～404℃和0．88～1．60GPa的低温高压变质条件下形成，结合区域地质背景资料分析，认为龚岔口低温高压变质带的产出构造环境可能是在祁连加里东期洋盆封闭过程中，中祁连陆块与火山弧碰撞，陆块前缘被俯冲下插带到很深的环境中，形成榴闪岩之后，在俯冲带后退的后续构造伸展和隆起过程中上升折返至浅处形成。该高压变质带的发现对于深入研究祁连造山带的构造演化具有重要的意义。 相似文献
10.
11.
本文分析了龙门山陆内俯冲带两侧岩石圈的强度结构特征及在侧向力作用下所发生的变形过程。盆地岩石圈中高强度层厚而紧凑,显示了较好的整体高强度性;造山带岩石圈上地壳具高强度,其下为低强度层。在侧向挤压力的作用下,变形主要发生于造山带一侧,最可能的变形方式是其脆性上地壳出现倾向后陆的逆冲断层,盆地岩石圈沿此断层俯冲,挤压其下部的低强度层,使之发生韧性增厚变形。 相似文献
12.
Tectonically the Dabie orogenic belt consists mainly of the Dabieshan Yanshanian uplifted zone and the Beihuaiyang Variscan-Indosinian folding zone. In the north boundary adjoining the North China Block, there are an Early Palaeozoic ophiolitic mixtite belt and the Hefei Mesozoic-Cenozoic faulted basin which overlaps on the suture belt. In the south of Dabie orogen, there is a secondary tectonic unit called Foreland thrust-faulted structural zone which was mainly formed by the intracontinental subductions during Mesozoic era. The study shows that the Dabie Block is a part of mid-late Proterozoic palaeo-island arc at the north margin of Yangtze Block. During Caledonian period, as a submerged uplift at the northen continental margin of Yangtze Block, the Dabie Block collided with the early Palaeozoic palaeo-island arc at the south margin of North China Block, resulting in the convergence of the North and South China Blocks and the disappearance of oceanic crust. Since then,large-scale intracontinental subductions were followed. Dabie Orogenic Belt is the product of overlapping of Yangtze Block, Dabie Block and North China Block under the mechanism of intracontinental subduction. Indosinian period is the period of chief deformation and high pressure dynamic metamorphism for Dabie Block, and Yanshan period is the main orogenic period in which the remelting of crust caused by basement shearing resulted in large scale thermometamorphism. The present tectonic framework of the orogen was finally formed by the rapid uplifting of the Dabieshan mountains and gliding southwards, which result in the developing of thrust belt on south side and the extensional tectonic movement on north side. 相似文献
13.
Tectonically the Dabie orogenic belt consists mainly of the Dabieshan Yanshanian uplifted zone and the Beihuaiyang Variscan-Indosinian folding zone. In the north boundary adjoining the North China Block, there are an Early Palaeozoic ophiolitic mixtite belt and the Hefei Mesozoic-Cenozoic faulted basin which overlaps on the suture belt. In the south of Dabie orogen, there is a secondary tectonic unit called Foreland thrust-faulted structural zone which was mainly formed by the intracontinental subductions during Mesozoic era. The study shows that the Dabie Block is a part of mid-late Proterozoic palaeo-island arc at the north margin of Yangtze Block. During Caledonian period, as a submerged uplift at the northen continental margin of Yangtze Block, the Dabie Block collided with the early Palaeozoic palaeo-island arc at the south margin of North China Block, resulting in the convergence of the North and South China Blocks and the disappearance of oceanic crust. Since then,large-scale intracontinental subductions were followed. Dabie Orogenic Belt is the product of overlapping of Yangtze Block, Dabie Block and North China Block under the mechanism of intracontinental subduction. Indosinian period is the period of chief deformation and high pressure dynamic metamorphism for Dabie Block, and Yanshan period is the main orogenic period in which the remelting of crust caused by basement shearing resulted in large scale thermometamorphism. The present tectonic framework of the orogen was finally formed by the rapid uplifting of the Dabieshan mountains and gliding southwards, which result in the developing of thrust belt on south side and the extensional tectonic movement on north side. 相似文献
14.
益阳火山岩特征及其形成构造环境分析 总被引：11，自引：0，他引：11
益阳火山岩中的熔岩、辉长辉绿岩和玄武质科马提岩,分别与蛇绿岩套中的熔岩、熔岩中的脉岩或岩墙杂岩和层状堆晶辉长岩有相似或相同的化学成分与微量元素含量,它们具有蛇绿岩套属性。与邻区广西、江西和安徽等省的蛇绿岩套分布在同一带上。因而认为,湖南境内沿通道—淑浦—宁乡—浏阳一带存在一条元古宙的古板块消减带,它控制了湖南中北部地区大地构造的演化和发展。 相似文献
15.
板块构造理论是古板块分区的基础。古板块构造分区和命名必须有明确的时空概念。按照威尔逊旋回，大洋俯冲阶段的构造分带最复杂、最明显，应该以该阶段作为分区的时间区间，一级构造单元是岩石图板块，以大洋型蛇绿混杂岩带作为分区界线；二级构造单元以地壳性质作为分区原则，可分为过渡壳和陆壳，地壳性质依据蛇绿岩（套）、沉积建造、岩浆岩组合特征来综合判别；三级构造单元是在二级构造区内以沉积岩、火山岩、岩浆岩建造的显著差异为分区原则，如岛弧弧盆带内分为弧前隆起、弧前盆地、岛弧带、弧间盆地、弧后盆地，在陆壳区内分为稳定陆壳区及活动陆壳区。四级构造单元是在三级构造区内以构造形态或局部地质特征作为分区原则，分为复背斜、复向斜、断褶带、岩浆岩带、蛇绿混杂岩带等。 相似文献
16.
苏鲁超高压带内石桥浅变质岩的地质成因及其研究意义 总被引：1，自引：1，他引：0
苏鲁造山带超高压变质带内部出露仅经过绿片岩相变质作用的浅变质岩系,地质调查显示,石桥浅变质岩与周边超高压变质岩呈构造接触(构造片岩);地球化学研究证实,该浅变质岩形成于扬子板块北缘大陆边缘厚地壳上裂陷或沉积盆地的构造背景;单矿物电子探针分析结果显示,其部分浅变质岩发育多硅白云母,形成于中-高压相变质环境,说明这些浅变质岩曾经历大陆板块俯冲的动力变质作用过程。在此基础上,进一步讨论浅变质岩的成因机制及其与超高压变质岩和扬子板块俯冲之间的关系。 相似文献
17.
Long-lived subduction complexes, such as the Franciscan Complex of California, include tectonic contacts that represent exhumed megathrust horizons that collectively accommodated thousands of kilometres of slip. The chaotic nature of mélanges in subduction complexes has spawned proposals that these mélanges form as a result of megathrust displacement. Detailed field and petrographic relationships, however, show that most Franciscan mélanges with exotic blocks formed by submarine landsliding. Field relationships at El Cerrito Quarry in the eastern San Francisco Bay area suggest that subduction slip may have been accommodated between the blueschist facies metagreywacke of the Angel Island nappe above and the prehnite-pumpellyite facies metagreywacke of the Alcatraz nappe below. Although a 100–200 m-thick mélange zone separates the nappes, this mélange is a variably deformed, prehnite-pumpellyite facies sedimentary breccia and conglomerate deposited on the underlying coherent sandstone, so the mélange is part of the lower nappe. A 20–30 m-thick fault zone between the top of the mélange, and the base of the Angel Island nappe displays an inverted metamorphic gradient with jadeite-glaucophane-lawsonite above lawsonite-albite assemblages. This zone has a strong seaward (SW)-vergent shear fabric and hosts ultracataclasite and pseudotachylite. These relationships suggest that significant subduction megathrust displacement at depths of 15–30 km was accommodated within the 20–30 m-thick fault zone. Field studies elsewhere in the Franciscan Complex suggest similar localization of megathrust slip, with some examples lacking mélanges. The narrow megathrust zone at El Cerrito Quarry, its uniform sense-of-shear, and the localization of slip along the contact of, rather than within a mélange, contrast sharply with the predictions of numerical models for subduction channels. 相似文献
18.
Alastair Robertson Osman Parlak Timur Ustaömer Kemal Taslı Nurdan İnan Paulian Dumitrica 《Geodinamica Acta》2013,26(3-4):230-293
This paper presents several types of new information including U–Pb radiometric dating of ophiolitic rocks and an intrusive granite, micropalaeontological dating of siliceous and calcareous sedimentary rocks, together with sedimentological, petrographic and structural data. The new information is synthesised with existing results from the study area and adjacent regions (Central Pontides and Lesser Caucasus) to produce a new tectonic model for the Mesozoic–Cenozoic tectonic development of this key Tethyan suture zone.The Tethyan suture zone in NE Turkey (Ankara–Erzincan–Kars suture zone) exemplifies stages in the subduction, suturing and post-collisional deformation of a Mesozoic ocean basin that existed between the Eurasian (Pontide) and Gondwanan (Tauride) continents. Ophiolitic rocks, both as intact and as dismembered sequences, together with an intrusive granite (tonalite), formed during the Early Jurassic in a supra-subduction zone (SSZ) setting within the ?zmir–Ankara–Erzincan ocean. Basalts also occur as blocks and dismembered thrust sheets within Cretaceous accretionary melange. During the Early Jurassic, these basalts erupted in both a SSZ-type setting and in an intra-plate (seamount-type) setting. The volcanic-sedimentary melange accreted in an open-ocean setting in response to Cretaceous northward subduction beneath a backstop made up of Early Jurassic forearc ophiolitic crust. The Early Jurassic SSZ basalts in the melange were later detached from the overriding Early Jurassic ophiolitic crust.Sedimentary melange (debris-flow deposits) locally includes ophiolitic extrusive rocks of boninitic composition that were metamorphosed under high-pressure low-temperature conditions. Slices of mainly Cretaceous clastic sedimentary rocks within the suture zone are interpreted as a deformed forearc basin that bordered the Eurasian active margin. The basin received a copious supply of sediments derived from Late Cretaceous arc volcanism together with input of ophiolitic detritus from accreted oceanic crust.Accretionary melange was emplaced southwards onto the leading edge of the Tauride continent (Munzur Massif) during latest Cretaceous time. Accretionary melange was also emplaced northwards over the collapsed southern edge of the Eurasian continental margin (continental backstop) during the latest Cretaceous. Sedimentation persisted into the Early Eocene in more northerly areas of the Eurasian margin.Collision of the Tauride and Eurasian continents took place progressively during latest Late Palaeocene–Early Eocene. The Jurassic SSZ ophiolites and the Cretaceous accretionary melange finally docked with the Eurasian margin. Coarse clastic sediments were shed from the uplifted Eurasian margin and infilled a narrow peripheral basin. Gravity flows accumulated in thrust-top piggyback basins above accretionary melange and dismembered ophiolites and also in a post-collisional peripheral basin above Eurasian crust. Thickening of the accretionary wedge triggered large-scale out-of-sequence thrusting and re-thrusting of continental margin and ophiolitic units. Collision culminated in detachment and northward thrusting on a regional scale.Collisional deformation of the suture zone ended prior to the Mid-Eocene (~45?Ma) when the Eurasian margin was transgressed by non-marine and/or shallow-marine sediments. The foreland became volcanically active and subsided strongly during Mid-Eocene, possibly related to post-collisional slab rollback and/or delamination. The present structure and morphology of the suture zone was strongly influenced by several phases of mostly S-directed suture zone tightening (Late Eocene; pre-Pliocene), possible slab break-off and right-lateral strike-slip along the North Anatolian Transform Fault.In the wider regional context, a double subduction zone model is preferred, in which northward subduction was active during the Jurassic and Cretaceous, both within the Tethyan ocean and bordering the Eurasian continental margin. 相似文献
19.
J.C.Aitchison Badengzhu A.M.Davis Liu J. Luo H. J.Malpas I.McDermid Zhou M.F. Wu H. S.Zyabrev WT ”BX 《地学前缘》2000,(Z1)
ACCRETION OF AN EARLY CRETACEOUS INTRA- OCEANIC ISLAND ARC TO INDIA: EVIDENCE FROM THE YARLUNG ZANGBO SUTURE ZONE 相似文献
20.
西武夷地区早古生代浅色花岗岩的厘定及其造山意义 总被引：1，自引：0，他引：1
西武夷地区的付坊超单元是一套白云母／二云母花岗岩组合,岩性包括白云母／二云母花岗闪长岩和白云母／二云母二长花岗岩,年龄为４７２～４４６Ｍａ。它是下生代华夏古陆向扬子板块爷冲、华夏板块内部武夷地块与罗霄地块接俣过程中形成的陆内俯冲花岗岩,两地块的接合部位－雩山接合带是一条陆内俯冲带。 相似文献