首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
认识深部裂隙岩体中的地下水渗流特征(流速、渗流路径等),是深部地质工程开发建设的重要前提。近年来,分布式光纤测温技术作为识别深部裂隙岩体地下水渗流特征的有效方法,在国外开展了大量的研究,但在国内鲜少见在实际场地开展的相关工作。本研究以我国首个地下实验室场址甘肃北山新场花岗岩岩体中的两个钻孔(BSQ02及BSQ03)为试验对象,开展基于分布式光纤测温(Fiber-Optic Distributed Temperature Sensing,FO-DTS)的现场温度-水力试验,实现了对钻孔地下水温度的高精度、连续性观测。通过分析现场试验获取的钻孔温度-深度剖面随时间的变化,推断BSQ02在试验过程中存在外源地下水的流入,然后结合钻孔柱状图对钻孔中的入流导水裂隙进行了定位;基于现场观测数据建立了钻孔的渗流-传热耦合数值模型,反演估算出钻孔中地下水平均流速为0.01 m·s-1,通过裂隙流入地下水温度小于钻孔中原地下水温度,两者之间的温度差为0.7 ℃,通过裂隙流入的地下水流速为1×10-5 m·s-1,获取了地下水的渗流特征。该项工作可为基于分布式光纤测温技术的裂隙介质地下水渗流规律研究提供借鉴与指导。  相似文献   

2.
Fractured-rock aquifers display spatially and temporally variable hydraulic conductivity generally attributed to variable fracture intensity and connectivity. Empirical evidence suggests fracture aperture and hydraulic conductivity are sensitive to in situ stress. This study investigates the sensitivity of fractured-rock hydraulic conductivity, groundwater flow paths, and advection-dominated transport to variable shear and normal fracture stiffness magnitudes for a range of deviatoric stress states. Fracture aperture and hydraulic conductivity are solved for analytically using empirical hydromechanical coupling equations; groundwater flow paths and ages are then solved for numerically using groundwater flow and advection-dispersion equations in a traditional Toth basin. Results suggest hydraulic conductivity alteration is dominated by fracture normal closure, resulting in decreasing hydraulic conductivity and increasing groundwater age with depth, and decreased depth of long flow paths with decreasing normal stiffness. Shear dilation has minimal effect on hydraulic conductivity alteration for stress states investigated here. Results are interpreted to suggest that fracture normal stiffness influences hydraulic conductivity of hydraulically active fractures and, thus, affects flow and transport in shallow (<1 km) fractured-rock aquifers. It is suggested that observed depth-dependent hydraulic conductivity trends in fractured-rock aquifers throughout the world may be partly a manifestation of hydromechanical phenomena.  相似文献   

3.
Inflow data from 23 tunnels and galleries, 136 km in length and located in the Aar and Gotthard massifs of the Swiss Alps, have been analyzed with the objective (1) to understand the 3-dimensional spatial distribution of groundwater flow in crystalline basement rocks, (2) to assess the dependency of tunnel inflow rate on depth, tectonic overprint, and lithology, and (3) to derive the distribution of fracture transmissivity and effective hydraulic conductivity at the 100-m scale. Brittle tectonic overprint is shown to be the principal parameter regulating inflow rate and dominates over depth and lithology. The highest early time inflow rate is 1,300 l/s and has been reported from a shallow hydropower gallery intersecting a 200-m wide cataclastic fault zone. The derived lognormal transmissivity distribution is based on 1,361 tunnel intervals with a length of 100 m. Such interval transmissivities range between 10?9 and 10?1 m2/s within the first 200–400 m of depth and between 10?9 and 10?4 m2/s in the depth interval of 400–1,500 m below ground surface. Outside brittle fault zones, a trend of decreasing transmissivity/hydraulic conductivity with increasing depth is observed for some schistous and gneissic geological units, whereas no trend is identified for the granitic units.  相似文献   

4.
The trend of decreasing permeability with depth was estimated in the fractured-rock terrain of the upper Potomac River basin in the eastern USA using model calibration on 200 water-level observations in wells and 12 base-flow observations in subwatersheds. Results indicate that permeability at the 1–10 km scale (for groundwater flowpaths) decreases by several orders of magnitude within the top 100 m of land surface. This depth range represents the transition from the weathered, fractured regolith into unweathered bedrock. This rate of decline is substantially greater than has been observed by previous investigators that have plotted in situ wellbore measurements versus depth. The difference is that regional water levels give information on kilometer-scale connectivity of the regolith and adjacent fracture networks, whereas in situ measurements give information on near-hole fractures and fracture networks. The approach taken was to calibrate model layer-to-layer ratios of hydraulic conductivity (LLKs) for each major rock type. Most rock types gave optimal LLK values of 40–60, where each layer was twice a thick as the one overlying it. Previous estimates of permeability with depth from deeper data showed less of a decline at <300 m than the regional modeling results. There was less certainty in the modeling results deeper than 200 m and for certain rock types where fewer water-level observations were available. The results have implications for improved understanding of watershed-scale groundwater flow and transport, such as for the timing of the migration of pollutants from the water table to streams.  相似文献   

5.
In many regions of the world, crystalline bedrock aquifers are the only choice for groundwater supply. This is the case in northern Wisconsin, located in the upper Midwest of the continental United States. Here, groundwater flow to wells occurs only through fractures in the granitic basement. Although hydrofracturing of these wells is common and generally increases well yield, the precise mechanism for the increased yields remained unknown. Stressed and ambient flow logs were obtained in two 305-m-deep granitic boreholes in northern Wisconsin prior to hydrofracturing. From those logs, it was determined that nearly all of the groundwater flow to the boreholes occurred in less than 10 fractures in the upper 80 m, with no measureable contribution below that depth. Following hydrofracturing of the boreholes, stressed and ambient flow logs were again obtained. The transmissivity of the two boreholes increased by factors of 8.6 and 63 times. It was found that (1) the fractures that had contributed flow to the boreholes increased in transmissivity, (2) although the applied pressures were large enough in some instances to create new fractures, those new fractures did not increase the borehole transmissivities significantly, and (3) fractures without measureable flow before hydrofracturing remained without measureable flow. Hydrofracturing increases yield in granitic boreholes; however, that increase seems to only occur in fractures where flow was pre-existing and in the upper 80 m of the boreholes. These observations suggest that efforts to enhance yield in granitic aquifers should be focused on the upper part of the borehole.  相似文献   

6.
Drilling of a deep borehole does not normally allow for hydrologic testing during the drilling period. It is only done when drilling experiences a large loss (or high return) of drilling fluid due to penetration of a large-transmissivity zone. The paper proposes the possibility of conducting flowing fluid electrical conductivity (FFEC) logging during the drilling period, with negligible impact on the drilling schedule, yet providing important information on depth locations of both high- and low-transmissivity zones and their hydraulic properties. The information can be used to guide downhole fluid sampling and post-drilling detailed testing of the borehole. The method has been applied to the drilling of a 2,500-m borehole at Åre, central Sweden, firstly when the drilling reached 1,600 m, and then when the drilling reached the target depth of 2,500 m. Results unveil eight hydraulically active zones from 300 m down to borehole bottom, with depths determined to within the order of a meter. Further, the first set of data allows the estimation of hydraulic transmissivity values of the six hydraulically conductive zones found from 300 to 1,600 m, which are very low and range over one order of magnitude.  相似文献   

7.
Filter analysis of lineaments in Precambrian metamorphic rocks was used to delineate fracture-correlated lineaments and hydraulically significant fractures. The unfiltered analysis technique fails to show correlation between major lineaments and fractures. Domain-based and discrete filtering techniques successfully identify fracture-correlated lineaments within the brittle-ductile shear zone in conjunction with fractures characterized by high fracture frequencies (>10/m). The locales of hydraulically significant fractures can thus be assessed if the geological controls governing the spatial distribution of fracture frequencies are computed using structural domain approach. The concurrence of fracture-correlated lineaments and hydraulically significant fractures within the brittle-ductile shear zone is evident.  相似文献   

8.
Fault zone structure and lithology affect permeability of Triassic Muschelkalk limestone-marl-alternations in Southwest Germany, a region characterized by a complex tectonic history. Field studies of eight fault zones provide insights into fracture system parameters (orientation, density, aperture, connectivity, vertical extension) within fault zone units (fault core, damage zone). Results show decreasing fracture lengths with distances to the fault cores in well-developed damage zones. Fracture connectivity at fracture tips is enhanced in proximity to the slip surfaces, particularly caused by shorter fractures. Different mechanical properties of limestone and marl layers obviously affect fracture propagation and thus fracture system connectivity and permeability. Fracture apertures are largest parallel and subparallel to fault zones and prominent regional structures (e.g., Upper Rhine Graben) leading to enhanced fracture-induced permeabilities. Mineralized fractures and mineralizations in fault cores indicate past fluid flow. Permeability is increased by the development of hydraulically active pathways across several beds (non-stratabound fractures) to a higher degree than by the formation of fractures interconnected at fracture tips. We conclude that there is an increase of interconnected fractures and fracture densities in proximity to the fault cores. This is particularly clear in more homogenous rocks. The results help to better understand permeability in Muschelkalk rocks.  相似文献   

9.
Application of the cross-borehole flow method, in which short pumping cycles in one borehole are used to induce time-transient flow in another borehole, demonstrated that a simple hydraulic model can characterize the fracture connections in the bedrock mass between the two boreholes. The analysis determines the properties of fracture connections rather than those of individual fractures intersecting a single borehole; the model contains a limited number of adjustable parameters so that any correlation between measured and simulated flow test data is significant. The test was conducted in two 200-m deep boreholes spaced 21?m apart in the Melechov Granite in the Bohemian-Moravian Highland, Czech Republic. Transient flow was measured at depth stations between the identified transmissive fractures in one of the boreholes during short-term pumping and recovery periods in the other borehole. Simulated flows, based on simple model geometries, closely matched the measured flows. The relative transmissivity and storage of the inferred fracture connections were corroborated by tracer testing. The results demonstrate that it is possible to assess the properties of a fracture flow network despite being restricted to making measurements in boreholes in which a local population of discrete fractures regulates the hydraulic communication with the larger-scale aquifer system.  相似文献   

10.
Gas production from shale formations by hydraulic fracturing has raised concerns about the effects on the quality of fresh groundwater. The migration of injected fracking fluids towards the surface was investigated in the North German Basin, based on the known standard lithology. This included cases with natural preferential pathways such as permeable fault zones and fracture networks. Conservative assumptions were applied in the simulation of flow and mass transport triggered by a high pressure boundary of up to 50 MPa excess pressure. The results show no significant fluid migration for a case with undisturbed cap rocks and a maximum of 41 m vertical transport within a permeable fault zone during the pressurization. Open fractures, if present, strongly control the flow field and migration; here vertical transport of fracking fluids reaches up to 200 m during hydraulic fracturing simulation. Long-term transport of the injected water was simulated for 300 years. The fracking fluid rises vertically within the fault zone up to 485 m due to buoyancy. Progressively, it is transported horizontally into sandstone layers, following the natural groundwater flow direction. In the long-term, the injected fluids are diluted to minor concentrations. Despite the presence of permeable pathways, the injected fracking fluids in the reported model did not reach near-surface aquifers, either during the hydraulic fracturing or in the long term. Therefore, the probability of impacts on shallow groundwater by the rise of fracking fluids from a deep shale-gas formation through the geological underground to the surface is small.  相似文献   

11.
L. Lin  H. Jia  Y. Xu 《Hydrogeology Journal》2007,15(7):1419-1432
Core samples from an 800-m deep borehole at the Rietfontein Farm, 10 km west of Graafwater, Western Cape, South Africa, were examined and interpreted for the hydrogeological significance of the Table Mountain Group (TMG) in the area. A suite of fracture data was collected and analysed to characterize the aquifer and conceptualize flow in the vicinity of the hole. Based on these data, the hydraulic conductivity, and density and coating intensity (due to precipitation) of the fractures against depth were computed. The dependence of fracture density on depth is very weak, while the intensity of fracture coatings is closely linked to the distribution of hydraulically active fractures that represents the maximum number of fractures currently open to groundwater flow. Four scenarios of depth ranges reflecting the development of hydraulically active fractures are proposed as a depth model of groundwater flow, implying that the majority of groundwater exists above 400 m depth. The top of the hydraulically inactive fracture zone clearly indicates that no groundwater flow could take place below a depth of about 570 m. The depth model gives a better understanding of the properties of the aquifers in the area and improves conceptual models, considering the lower limit of aquifer depth in particular.
Résumé Des carottes issues d’un forage profond de 800 m, situé à la ferme Rietfontein à 10 km à l’ouest de Graafwater au Cap Ouest en Afrique du Sud, ont été examinées et analysées dans le cadre de l’étude de l’importance hydrogéologique du Table Mountain Group (TMG) dans la zone. Un ensemble de données de fracture a été collecté et analysé afin de caractériser l’aquifère et de conceptualiser l’écoulement aux alentours du puits. A partir de ces données, la conductivité hydraulique, la densité et l’intensité du remplissage des fractures (causé par la précipitation) ont été calculées en fonction de la profondeur. La relation entre la densité de fracture et la profondeur est faible, alors que l’intensité du remplissage des fractures est intimement liée à la distribution des fractures hydrauliquement actives qui sont définies par le nombre maximum de fractures ouvertes à l’écoulement de l’eau souterraine. Quatre scenarii avec différentes profondeurs représentant le développement de fractures hydrauliquement actives sont proposés comme modèle de la profondeur de l’écoulement souterrain en supposant que la majorité de l’eau souterraine se situe au dessus de 400 m de profondeur. La partie supérieure de la zone de fractures hydrauliquement inactives montre clairement qu’aucun écoulement souterrain ne pourrait avoir lieu en dessous de 570 m de profondeur. Le modèle de profondeur permet une meilleure compréhension des propriétés aquifères dans la zone et améliore les modèles conceptuels en particulier du fait qu’il prenne en compte la limite inférieure de l’aquifère.
Resumen Se han examinado e interpretado testigos de un sondeo de 800 m realizado en la Granja Rietfontein, situada a 10 km al Oeste de Graafwater, Western Cape, Sudáfrica, para estudiar la importancia hidrogeológica del Grupo Table Mountain (TMG) en el área. Un conjunto de datos de fracturas fueron recogidos y analizados para caracterizar el acuífero y conceptualizar el flujo en las cercanías de la perforación. Basándose en estos datos, se computerizaron la conductividad hidráulica y la densidad y relleno de las fracturas (debida a precipitación) frente a su profundidad. La dependencia de la densidad de fracturación con la profundidad es muy débil, mientras que el relleno de la fractura está directamente ligada con la distribución de las fracturas hidráulicamente activas que representan el máximo número de fracturas abiertas actualmente al flujo de aguas subterráneas. Se propone cuatro escenarios de rangos de profundidad que reflejan el desarrollo de fracturas activas hidráulicamente, como un modelo de profundidad del flujo del agua subterránea que implica que la mayor parte del agua subterránea se encuentra por encima de los 400 m de profundidad. La parte superior de la zona de fracturas hidráulicamente inactivas indica claramente que el flujo del agua subterránea puede producirse por debajo de una profundidad de unos 570 m. El modelo de profundidades ofrece una mejor comprensión de las propiedades de los acuíferos en el área y mejora los modelos conceptuales considerando el límite inferior de la profundidad del acuífero en particular.
  相似文献   

12.
Recent work in southern Ontario, Canada, demonstrates anomalously high vertical groundwater flow velocities (>1 m/year) through a thick (as much as 60 m), sandy silt till aquitard (Northern till), previously assumed to be of very low permeability (hydraulic conductivity <10–10 m/s). Rapid recharge is attributed to the presence of fractures and sedimentary heterogeneities within the till, but the field-scale flow regime is poorly understood. This study identifies the nature of physical groundwater pathways through the till and provides estimates of the associated groundwater fluxes. The aquitard groundwater flow system is characterized by integrating details of the outcrop and subsurface sedimentary characteristics of the till with field-based hydrogeologic investigation and numerical modeling. Outcrop and subsurface data identify a composite internal aquitard stratigraphy consisting of tabular till beds (till elements) separated by laterally continuous sheet-like sands and gravels (interbeds) and boulder pavements. Individual till elements contain sedimentary heterogeneities, including discontinuous sand and gravel lenses, vertical sand dikes, and zones of horizontal and vertical fractures. Hydrogeologic field investigations indicate a three-layer aquitard flow system, consisting of upper and lower zones of more hydraulically active and heterogeneous till separated by a middle unit of relatively lower hydraulic conductivity. Groundwater pathways and fluxes in the till were evaluated using a two-dimensional aquitard/aquifer flow model which indicates a step-wise flow mechanism whereby groundwater moves alternately downward along vertical pathways (fractures, sedimentary dikes) and laterally along horizontal sand interbeds within the till. This model is consistent with observed hydraulic-head and isotope profiles, and the presence of tritiated pore waters at various depths throughout the till. Simulations suggest that a bulk aquitard vertical hydraulic conductivity on the order of 1×10–9 m/s is required to reproduce observed hydraulic-head and tritium profiles. Electronic Publication  相似文献   

13.
The feasibility of using geological and geophysical well-log and borehole-televiewer data for the identification of hydraulically transmissive fractures is evaluated. Twenty-nine boreholes were drilled to a depth of 100?m in the middle-stream basin of Jhuoshuei River, Taiwan. Four criteria that assist in indicating the potential presence of permeable zones are proposed, including: lower gamma-ray response compared with the average response, divergence of the short normal-resistivity log relative to that of the long one, longer sonic travel time, and the appearance of discernible openings detected with the televiewer. With these, the transmissivities at the predetermined depths were estimated and verified by an in-situ hydraulic test. The statistical results indicate that, particularly in the mountainous area where a complex folded structure with a succession of synclines and anticlines is shown, the interpretation of lithologic conditions is not necessary to identify the presence of a relatively higher-permeability zone. Comparatively, the estimates of porosity and fracture aperture are the necessary premises to the prediction of hydraulically transmissive fractures. A joint consideration of all four criteria is found, allowing a less biased evaluation of the fracture transmissivity.  相似文献   

14.
Temperature profiles from 25 boreholes were used to understand the spatial and vertical groundwater flow systems in the Western Nile Delta region of Egypt, as a case study of a semi-arid region. The study area is located between the Nile River and Wadi El Natrun. The recharge areas, which are located in the northeastern and the northwestern parts of the study area, have low subsurface temperatures. The discharge areas, which are located in the western (Wadi El Natrun) and southern (Moghra aquifer) parts of the study area, have higher subsurface temperatures. In the deeper zones, the effects of faults and the recharge area in the northeastern direction disappear at 80 m below sea level. For that depth, one main recharge and one main discharge area are recognized. The recharge area is located to the north in the Quaternary aquifer, and the discharge area is located to the south in the Miocene aquifer. Two-dimensional groundwater-flow and heat-transport models reveal that the sealing faults are the major factor disturbing the regional subsurface thermal regime in the study area. Besides the main recharge and discharge areas, the low permeability of the faults creates local discharge areas in its up-throw side and local recharge areas in its down-throw side. The estimated average linear groundwater velocity in the recharge area is 0.9 mm/day to the eastern direction and 14 mm/day to the northwest. The average linear groundwater discharge velocities range from 0.4 to 0.9 mm/day in the southern part.  相似文献   

15.
Efforts to map the lithology and geometry of sand and gravel channel‐belts and valley‐fills are limited by an inability to easily obtain information about the shallow subsurface. Until recently, boreholes were the only method available to obtain this information; however, borehole programmes are costly, time consuming and always leave in doubt the stratigraphic connection between and beyond the boreholes. Although standard shallow geophysical techniques such as ground‐penetrating radar (GPR) and shallow seismic can rapidly obtain subsurface data with high horizontal resolution, they only function well under select conditions. Electrical resistivity ground imaging (ERGI) is a recently developed shallow geophysical technique that rapidly produces high‐resolution profiles of the shallow subsurface under most field conditions. ERGI uses measurements of the ground's resistance to an electrical current to develop a two‐dimensional model of the shallow subsurface (<200 m) called an ERGI profile. ERGI measurements work equally well in resistive sediments (‘clean’ sand and gravel) and in conductive sediments (silt and clay). This paper tests the effectiveness of ERGI in mapping the lithology and geometry of buried fluvial deposits. ERGI surveys are presented from two channel‐fills and two valley‐fills. ERGI profiles are compared with lithostratigraphic profiles from borehole logs, sediment cores, wireline logs or GPR. Depth, width and lithology of sand and gravel channel‐fills and adjacent sediments can be accurately detected and delineated from the ERGI profiles, even when buried beneath 1–20 m of silt/clay.  相似文献   

16.
The present study deals with the seismic site classification of Bahrah area, Wadi Fatima, to characterize the local site conditions. The dynamic behavior of sediments was studied by the application of surface wave inversion. The multichannel analysis of surface waves (MASW) shallow geophysical technique was utilized for site classification. MASW survey was carried out at 66 sites along with 13 seismic refraction profiles at suitable localities. MASW and seismic refraction profiles were processed and compared with the available borehole data. The integration of MASW techniques with seismic refraction and borehole data progressively enhanced the subsurface visualization and reliability of the shear wave velocity estimation in the subsurface in the study area. The subsurface shear-wave velocity model was achieved by the solution of an inverse problem-based dispersion of surface waves and propagation in a vertically heterogeneous medium. The 2D genetic algorithm was employed for the inversion of dispersion curves to obtain velocity and thickness of subsurface layers. The depth to engineering bedrock and velocity of shear waves in the first 30 m was deciphered and mapped. The depth of bedrock in study area varies from 4 to 30 m, and V S 30 ranges from 320 to 800 m/s. The most of study area falls in B and C class categories in addition to few sites of D class according to the NEHRP guidelines.  相似文献   

17.
Khuff Formation is of utmost importance in Saudi Arabia for oil and gas reservoir although it is composed mainly of limestone. This reason refers to the existence of intensive fractures which play a vital role in the increase in porosity and permeability of this formation. The fracture pattern in the study area was verified through 2D and 3D ground penetrating radar (GPR)-defined and electrical resistivity tomography (ERT)-defined surveys. In this respect, ten of 2D GPR surveys were collected along an intersected grid of profiles covering the study area while ERT data were collected along three profiles of the GPR grid. The results were interpreted in light of the field-based structural and stratigraphic assessment of the outcropping rocks. The analysis of the inverted ERT and filtered GPR sections revealed the presence of fractures. Several resistivity and electromagnetic reflection anomalies were laterally and vertically identified across the measured sections clarifying fractures that extend to a depth of 24 m in the limestone. Most fractures are oriented vertical to sub-vertical dipping both east-west and north-south.  相似文献   

18.
As part of a larger regional research program “KarstEAU”, the authors have applied electrical resistivity tomography (ERT) techniques to characterize heterogeneities in the Port-Miou coastal karst aquifer (Cassis, SE France). Field surveys were carried out on intensely fractured and karstified Urgonian carbonates. Extensive research has characterized macro- and micro-scale geology of the Port-Miou area and particularly underground water-filled conduits and fault/fracture and karst systems within a former quarry. The authors applied 2D ERT along two surface profiles of length 420 and 595 m to test capability for delineating subsurface conduits and possibly relationship between conduit and fault/fracture/karst orientation; and 3D ERT with a dense 120 electrode array at 1 m spacing (11 × 10 m) was applied over an area of the quarry that had been profiled using 3D georadar and which has had intensive nearby structural geological interpretation. The 2D profiling imaged several underground conduits at depths to >50 m below ground surface and below sea level, including possibly the main Port Miou submarine spring and smaller springs. The 2D profiling within the quarry provided a better understanding of the connectivity between major fractures and faults on the quarry walls and secondary springs along the coast supporting flow of the secondary springs along interpreted fracture orientations. In addition, 2D inversion-derived conductivity models indicate that high resistivity zones above sea-level are associated with non-saturated zones and low resistivity anomalies in the non-saturated zone are associated with residual clays in paleokarsts. A partitioned lower resistivity zone below sea-level can be associated with a higher porosity/permeability zone with fractures and karstic features. Inversion models of the dense 3D ERT data indicate a higher resistivity volume within the larger surveyed block. The survey characterized the non-saturated zone and the ERT resistivities are correlated with karst features interpreted by 3D georadar and visible in the inferior wall of the quarry.  相似文献   

19.
This paper describes the application of magnetotelluric (MT) method to investigate Björkö impact structure located at west of Stockholm, Sweden. This structure has formed in crystalline rocks ca. 1.2 Ga ago and located relatively close to the district heating infrastructure of the Stockholm region, as the largest district heating system in Europe. Since impact structures mostly contain fractured rock volumes in the form of breccia formations, the occurred brecciation zones in this region are more favorable potential targets for geothermal investigations. The main objective is evaluating the capability of the study area to have potential for geothermal resources by mapping the subsurface structure. To image electrical characteristic of underground layers, 1D and 2D bimodal inversions of TE and TM modes of MT data are performed. The results are also compared with the outputs of the inversion of the determinant data (yielding a direction-independent average of the subsurface conductivity) along the same profiles, proving good accordance of the outputs. The processed resistivity sections at depth along with measuring various rock physical properties across two drilled boreholes at Björkö and Midsommar islands localized two conductors at depths of 1 km and from 2.5 to 4.5 km, which may be attributed to be a potential zone for geothermal energy retrieval.  相似文献   

20.
A two-dimensional fracture model based on micro-fracture mechanics is applied to the Hertzian indentation stress field to simulate subsurface fractures in an axi-symmetrical plane. The simulation of fracture development reveals quantitatively the effects of loading force, mechanical properties of the rocks, and original micro cracks on the formation of subsurface fractures. The distribution patterns of the subsurface fractures are determined by the magnitudes and trajectories of the indentation stresses. Lateral confinement prohibits the fracture development. Simulations of the subsurface fractures in granite and marble are in good agreement with the indentation experiments. © 1997 by John Wiley & Sons, Ltd.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号