共查询到20条相似文献，搜索用时 93 毫秒
1.
岩石流动性和变形显微构造的发育直接受温度、压力、应变速率和流体相等制约 ,致使在不同地壳层次岩石的流动性表现出很大的差异。对上部地壳环境条件下天然和实验变形岩石的显微构造分析揭示出一系列具有不同特点以及由不同的成核、扩展和联合方式形成的破裂与微破裂型式的存在。讨论了在上部地壳环境中 ,温度与围压的变化对岩石破裂的影响 ,并阐述了高压破裂与低压破裂及其力学、流变学和显微构造特点 ,提出高压破裂对应于天然变形环境下出现的剪切 (挤压 )破裂 ,而碎裂岩带是典型的天然低压破裂 ,其低压环境的出现可以是浅部低围压或深部高流体压力所致。流体相的存在不仅可以引起石英 ,也可以引起方解石类碳酸盐岩矿物的水解弱化 ,并进而导致岩石流动机制的转变。岩石变形及流体等因素所致的岩石粒度变化 ,则从另一个方面影响着上部地壳岩石流动性的变化。从变形环境考虑 ,随着深度的加大 ,温度和压力升高 ,导致岩石由脆性向韧性转变 ;转变域内岩石的变形是一个复杂过程 ,是多种不同脆性和晶质塑性机制的综合。 相似文献
2.
Klaus WEBER 《《地质学报》英文版》2002,76(3):292-299
Optical, cathodoluminescence and transmission electron microscope (TEM) analyses were conducted on four groups of calcite fault rocks, a cataclastic limestone, cataclastic coarse-grained marbles from two fault zones, and a fractured mylonite. These fault rocks show similar microstructural characteristics and give clues to similar processes of rock deformation. They are characterized by the structural contrast between macroscopic cataclastic (brittle) and microscopic mylonitic (ductile) microstructures. Intragranular deformation microstructures (i.e. deformation twins, kink bands and microfractures) are well preserved in the deformed grains in clasts or in primary rocks. The matrix materials are of extremely fine grains with diffusive features. Dislocation microstructures for co-existing brittle deformation and crystalline plasticity were revealed using TEM. Tangled dislocations are often preserved at the cores of highly deformed clasts, while dislocation walls form in the transitions to the fine-grained 相似文献
3.
《Journal of Structural Geology》2001,23(6-7):1167-1178
S–C fabrics similar to those found in mylonites are observed in foliated cataclastic granitic rocks from the Nojima fault zone, southwest Japan. The foliated cataclastic rocks comprise cataclasite, fault breccia, gouge, and crushing-originated pseudotachylyte. The S–C fabrics observed in these cataclastic rocks involve S-surfaces defined by shape preferred orientation of biotite fragments or aggregates of quartz and feldspar fragments, and C-and C′-surfaces defined by microshears and shear bands, respectively, where fine-grained material is concentrated. Striations on the main fault plane are oriented parallel to the cataclasite lineations. A significant microstructural difference between the foliated cataclastic rocks and S–C mylonites is the absence of dynamically recrystallized grains in the foliated cataclasites. The striations, cataclastic lineations, and the S–C fabrics in the cataclastic rocks formed from the late Tertiary to the late Holocene indicate that the Nojima fault zone has moved as a dextral strike-slip fault, with a minor reverse component since it formed. S–C fabrics in cataclastic rocks provide important information on the tectonic history and are reliable kinematic indicators of the shear sense in brittle shear zones or faults. 相似文献
4.
5.
Although the Indus-Tsangpo Suture(ITS) is the most spectacular thrust system of continent-continent collision in the world, fundamental questions about its strength evolution and deformation behavior transition remain unanswered. Here we reported, for the first time, frictional melting-induced pseudotachylytes in the intensively deformed felsic rocks along the ITS zone in southern Tibet. This study reveals that pseudotachylytes induced profound weakness of the boundary fault between Indian and Asian plates. The intrinsically low strength of the foliated microlites crystallized from frictional melt or glass(i.e., pseudotachylyte) at seismogenic depths compared with the surrounding coarse-grained quartzofeldspathic rocks in the brittle and semi-brittle regime is sufficient to explain the localization of shear strain, the development of ductile shear zones embedded in strong wall rocks, and the transition from the strong to weak fault behaviors without invoking the presence of high fluid pressure or low friction coefficient metasomatic materials(e.g., smectite or lizardite) within the faults. 相似文献
6.
S. White 《International Journal of Earth Sciences》2001,90(1):14-27
Fault rocks from the Siberia Fault Zone (SFZ) in southern New Zealand are derived from schists with varied mica contents. Regional evidence indicates that the rocks are exhumed from depths of 8-10 km and temperatures of 200-250 °C. Foliated cataclasites in a zone 5-40 m thick are accompanied by interlaced pseudotachylyte, and are cut through by a late-stage master fault and zones of random fabric cataclasite. Textures and microstructures in the foliated cataclasites reflect contemporaneous or cyclic operation of cataclastic, crystal-plastic and solution transfer deformation mechanisms, partitioned differently between different phases. The deformation regime is interpreted as a form of semi-brittle flow, facilitated by crystal-plastic deformation of phyllosilicate phases in a relatively weak interconnected matrix. Quartz and feldspar are deformed mainly by cataclasis. The presence of pseudotachylyte indicates the fault was seismically active, and non-localised semi-brittle flow was episodically punctuated by high strain-rate earthquake events. Late-stage formation of a discrete master fault probably reflects a change from semi-brittle flow to brittle faulting. The presently exposed level of the fault is thought to represent a section of the mid-crustal brittle-ductile transition in the seismogenic zone. Thus, this study provides a tangible natural example of theoretically and experimentally predicted fault rocks. 相似文献
7.
Quartz microstructures developed during non-steady state plastic flow at rapidly decaying stress and strain rate 总被引：7，自引：0，他引：7
Synseismic loading to very high stresses (>0.5 GPa) and subsequent creep during stress relaxation in the uppermost plastosphere at temperatures of ca. 300–350 °C, near the lower tip of an inferred once seismically active crustal scale fault, was proposed based on peculiar microstructures identified in rocks exposed over >100 km2 in the Sesia Zone, European Western Alps. Here we discuss the conspicuous and highly heterogeneous microstructural record of quartz in disseminated small-scale shear zones. Sub-basal deformation lamellae and arrays of elongate subgrains on the TEM-scale indicate an early stage of glide-controlled deformation at high stresses. Distributed brittle failure is indicated by healed microcracks. Very fine-grained recrystallised aggregates with a pronounced crystallographic preferred orientation reflect intense plastic flow by dislocation creep. Locally, a fine-grained foam microstructure indicates a final stage of static grain growth at low differential stress. For the previously inferred peak stresses of about 0.5 GPa and given temperatures, initial strain rates on the order of 10−10 s−1 are predicted by available flow laws for dislocation creep of quartz. We emphasise the importance of short-term non-steady state deformation in the uppermost plastosphere underlying seismically active upper crust. The related heterogeneous record of quartz is governed by the local stress history at constant temperature. 相似文献
8.
The unlined Bedretto tunnel in the Central Swiss Alps has been used to investigate in detail the fault architecture and late
Alpine brittle faulting processes in the Rotondo granite on macroscopic and microscopic scales. Brittle faults in the late
Variscan Rotondo granite preferentially are situated within the extent of preexisting ductile shear zones. Only in relatively
few cases the damage zone extends into or develops in the previously undeformed granite. Slickensides suggest a predominant
(dextral) strike-slip movement along these steeply dipping and NE–SW-striking faults. Microstructures of these fault rocks
illustrate a multi-stage retrograde deformation history from ductile to brittle conditions up to the cessation of fault activity.
In addition these fabrics allow identifying cataclastic flow, fluid-assisted brecciation and chemical corrosive wear as important
deformation mechanisms during this retrogressive deformation path. Based on the analysis of zeolite microfabrics (laumontite
and stilbite; hydrated Ca–Al- and Na–Ca–Al–silicate, respectively) in fault breccias, cataclasites and open fractures we conclude,
that the main phase of active brittle faulting started below 280°C and ceased ca. 14 Ma ago at temperatures slightly above
200°C. This corresponds to a depth of approx. 7 km. 相似文献
9.
The Moresby Seamount detachment (MSD) in the Woodlark Basin (offshore Papua New Guinea) is a large active low-angle detachment excellently exposed at the seafloor, and cutting through mafic metamorphic rocks. Hydrothermal infiltration of quartz followed by that of calcite occurred during cataclastic deformation. Subsequent deformation of these a priori softer minerals leads to mylonite formation in the MSD. This study aims at a better understanding of the deformation mechanism switch from cataclastic to plastic flow. Deformation fabrics of the fault rocks were analyzed by light-optical microscopy. Rheologically critical phases were mapped to determine distributions and area proportions, and EBSD was used to measure crystallographic preferred orientation (CPO). Strong calcite CPOs indicate dominant dislocation creep. Quartz CPOs, however, are weak and more difficult to interpret, suggesting at least some strain accommodation by diffusion creep mechanisms. When quartz aggregates are intermixed with the polymineralic mylonite matrix diffusion creep grain boundary sliding may be dominant. The syntectonic conversion from mafic cataclasites to more siliceous and carbonaceous mylonites induced by hydrothermal processes is a critical weakening mechanism enabling the MSD to at least intermittently plastic flow at low shear stresses. This is probably a crucial process for the operation of low-angle detachments in hydrated and dominantly mafic crust. 相似文献
10.
Faults in carbonates are well known sources of upper crustal seismicity throughout the world. In the outer sector of the Northern Apennines, ancient carbonate-bearing thrusts are exposed at the surface and represent analogues of structures generating seismicity at depth. We describe the geometry, internal structure and deformation mechanisms of three large-displacement thrusts from the km scale to the microscale. Fault architecture and deformation mechanisms are all influenced by the lithology of faulted rocks. Where thrusts cut across bedded or marly limestones, fault zones are thick (tens of metres) and display foliated rocks (S-CC′ tectonites and/or YPR cataclasites) characterized by intense pressure-solution deformation. In massive limestones, faulting occurs in localized, narrow zones that exhibit abundant brittle deformation. A general model for a heterogeneous, carbonate-bearing thrust is proposed and discussed. Fault structure, affected by stratigraphic heterogeneity and inherited structures, influences the location of geometrical asperities and fault strain rates. The presence of clay minerals and the strain rate experienced by fault rocks modulate the shifting from cataclasis-dominated towards pressure-solution-dominated deformation. Resulting structural heterogeneity of these faults may mirror their mechanical and seismic behaviour: we suggest that seismic asperities are located at the boundaries of massive limestones in narrow zones of localized slip whereas weak shear zones constitute slowly slipping portions of the fault, reflecting other types of “aseismic” behaviour. 相似文献
11.
Arrays of closely-spaced (approximately <70 mm) sub-parallel cataclastic deformation bands are common structures in deformed, high-porosity (∼10–35%) sandstones. The distribution of strain onto many small-displacement deformation bands is thought by some to result from strain-hardening of the cataclasite within individual bands. Examination of both normal and strike-slip faults with displacements ≤7 m from southeastern Utah, USA, and the North Island of New Zealand suggests, however, that clusters of deformation bands systematically develop at fault geometric irregularities (e.g., fault bends, steps, relays, intersections and zones of normal drag). The strain-hardening model does not account for clustering of deformation bands at fault geometric irregularities or the associated widespread coalescence of bands, and is not unequivocally demonstrated by post-peak macroscopic mechanical responses in laboratory rock deformation experiments. A geometric model is proposed in which individual bands within clusters develop sequentially due to migration of incremental shear strains at fault geometric irregularities as part of a slip localisation, asperity removal and strain weakening process. The geometric model, which does not require strain hardening of the fault rock, applies for the duration of faulting and a range of rock types in the brittle upper crust. 相似文献
12.
The San Andreas Fault zone in central California accommodates tectonic strain by stable slip and microseismic activity. We study microstructural controls of strength and deformation in the fault using core samples provided by the San Andreas Fault Observatory at Depth (SAFOD) including gouge corresponding to presently active shearing intervals in the main borehole. The methods of study include high-resolution optical and electron microscopy, X-ray fluorescence mapping, X-ray powder diffraction, energy dispersive X-ray spectroscopy, white light interferometry, and image processing.The fault zone at the SAFOD site consists of a strongly deformed and foliated core zone that includes 2–3 m thick active shear zones, surrounded by less deformed rocks. Results suggest deformation and foliation of the core zone outside the active shear zones by alternating cataclasis and pressure solution mechanisms. The active shear zones, considered zones of large-scale shear localization, appear to be associated with an abundance of weak phases including smectite clays, serpentinite alteration products, and amorphous material. We suggest that deformation along the active shear zones is by a granular-type flow mechanism that involves frictional sliding of microlithons along phyllosilicate-rich Riedel shear surfaces as well as stress-driven diffusive mass transfer. The microstructural data may be interpreted to suggest that deformation in the active shear zones is strongly displacement-weakening. The fault creeps because the velocity strengthening weak gouge in the active shear zones is being sheared without strong restrengthening mechanisms such as cementation or fracture sealing. Possible mechanisms for the observed microseismicity in the creeping segment of the SAF include local high fluid pressure build-ups, hard asperity development by fracture-and-seal cycles, and stress build-up due to slip zone undulations. 相似文献
13.
The Simplon Fault Zone is a late-collisional low-angle normal fault (LANF) of the Western Alps. The hanging wall shows evidence of brittle deformation only, while the footwall is characterized by a c. 1 km-thick shear zone (the Simplon Fault Zone), which continuously evolved, during exhumation and cooling, from amphibolite facies conditions to brittle-cataclastic deformations. Due to progressive localization of the active section of the shear zone, the thermal-rheological evolution of the footwall resulted in a layered structure, with higher temperature mylonites preserved at the periphery of the shear zone, and cataclasites occurring at the core (indicated as the Simplon Line). In order to investigate the weakness of the Simplon Line, we studied the evolution of brittle/cataclastic fault rocks, from nucleation to the most mature ones. Cataclasites are superposed on greenschist facies mylonites, and their nucleation can be studied at the periphery of the brittle fault zone. This is characterized by fractures, micro-faults and foliated ultracataclasite seams that develop along the mylonitic SCC′ fabric, exploiting the weak phases mainly represented by muscovite and chlorite. Approaching the fault core, both the thickness and frequency of cataclasite horizons increase, and, as their thickness increases, they become less and less foliated. The fault core itself is represented by a thicker non-foliated cataclasite horizon. No Andersonian faults or fractures can be found in the footwall damage zone and core zone, whilst they are present in the hanging wall and in the footwall further from the fault. Applying a stress model based on slip tendency, we have been able to calculate that the friction coefficient of the Simplon Line cataclasites was <0.25, hence this fault zone is absolutely weak. In contrast with other fault zones, the weakening effect of fluids was of secondary importance, since they accessed the fault zone only after an interconnected fracture network developed exploiting the cataclasite network. 相似文献
14.
地壳不同构造层次岩石变形机制及其构造岩类型 总被引：1，自引：0，他引：1
构造岩记录地壳构造变形演化重要信息,其成因、分类与命名一直没有统一认识。本文对构造岩变形机制、控制因素和构造岩分类进行系统总结。认为构造岩形成受物质成分、变形机制、应变速率、流体、温度、压力等因素控制,是物质成分与物理化学条件、变形机制等众多变量的函数。变形机制包括破裂作用、碎裂流动、晶质塑性、物质扩散、重结晶作用和超塑性流动,不同变形机制出现在不同地壳构造层次中,形成不同的显微组构。依据成因机制、物质组成和组构等标志对构造岩分类与命名进行重新修订,将构造岩划分为碎裂岩系列和变质构造岩系列,前者发育在地壳浅构造层次上,以破裂作用和碎裂流动变形机制为主;后者发育在中深部构造层次上,以晶质塑性、重结晶作用、物质扩散作用和超塑性流动作用为主。碎裂岩系列划分碎裂岩、角砾岩、微角砾岩、超碎裂岩、断层泥和假玄武玻璃;变质构造岩系列划分为构造片岩、糜棱岩和构造片麻岩。依据岩石流变性质、变形机制和构造岩分布,地壳构造层次划分为:脆性域,变形机制以碎裂作用和碎裂流动为主,发育碎裂岩系列;脆-韧性转换域,以晶质塑性、物质扩散和重结晶作用为主,并伴随有碎裂作用,形成糜棱岩、千糜岩和构造片岩;低温韧性域,以晶质塑性、物质扩散和重结晶作为主,发育糜棱岩与构造片岩;高温韧性域,以超塑性蠕变和重结晶作用为主,形成构造片麻岩。 相似文献
15.
Intense viscous-ductile deformations with multiorder flow folds and thin banding have been established in lherzolite and harzburgite of the Syumkeu massif 1.0–1.5 km below the boundary with crustal complexes. Intense shear deformation of mantle restites is traced along the entire boundary zone. The mineral composition of lherzolite and harzburgite in this zone occupies a transitional position between peridotite restites and olivine websterite from the lower part of the banded dunite-wehrlite-pyroxenite-gabbro complex. This implies that the mantle rocks from the crust-mantle transition zone were substantially transformed under transpressional intense shear stress settings along with a high-temperature ductile flow of mantle restites interacting with the supplied melt at a depth of more than 10 km. This type of transition zones differs from those known elsewhere in the Urals and supplements our knowledge on modes of mantle restite juxtaposition with crustal plutonic rocks. 相似文献
16.
Fault-valve behaviour in optimally oriented shear zones: an example at the Revenge gold mine, Kambalda, Western Australia 总被引：1，自引：0，他引：1
Phung T Nguyen Lyal B Harris Chris McA Powell Stephen F Cox 《Journal of Structural Geology》1998,20(12):1625-1640
Quartz vein systems developed in and adjacent to shear zones host major gold deposits in the Kambalda region of the Norseman–Wiluna greenstone belt. At the Revenge Mine, two groups of mineralised reverse shear zones formed as conjugate, near-optimally oriented sets during ESE subhorizontal shortening adjacent to a major transpressional shear system. The shear zones developed at temperatures of about 400°C in a transitional brittle–ductile regime. Deformation was associated with high fluid fluxes and involved fault-valve behaviour at transiently near-lithostatic fluid pressures. During progressive evolution of the shear system, early brittle and ductile deformation was overprinted by predominantly brittle deformation. Brittle shear failure was associated with fault dilation and the formation of fault-fill veins, particularly at fault bends and jogs. A transition from predominantly brittle shear failure to combined shear along faults and extension failure adjacent to faults occurred late during shear zone evolution and is interpreted as a response to a progressive decrease in maximum shear stress and a decrease in effective stresses. The formation of subhorizontal stylolites, locally subvertical extension veins and minor normal faults in association with thrust faulting, indicates episodic or transient reorientation of the near-field maximum principal stress from a subhorizontal to a near-vertical attitude during some fault-valve cycles. Local stress re-orientation is interpreted as resulting from near-total shear stress release and overshoot during some rupture events. Previously described fault-valve systems have formed predominantly in severely misoriented faults. The shear systems at Revenge Mine indicate that fault-valve action, and associated fluctuations in shear stress and fluid pressure, can influence the mechanical behaviour of optimally-oriented faults. 相似文献
17.
Velocity dependence of strength and healing behaviour in simulated phyllosilicate-bearing fault gouge 总被引：2，自引：0，他引：2
Despite the fact that phyllosilicates are widespread in fault zones, little is known about the strength of phyllosilicate-bearing fault rocks under brittle–ductile transitional conditions. In this study, we explored the steady state strength and healing behaviour of a simulated phyllosilicate-bearing fault rock, i.e. muscovite plus halite and brine, at room temperature, normal stresses of 1–9 MPa, atmospheric fluid pressure and sliding velocities of 0.001–13 μm/s, using a rotary shear apparatus. While 100% halite and 100% muscovite samples exhibit rate-independent frictional/brittle behaviour, the strength of mixtures containing 10–50% muscovite is both normal stress and sliding velocity dependent. At low velocities (< 1 μm/s), strength increases with increasing velocity and normal stress, and a mylonitic foliation develops. This behaviour results from pressure solution in the halite grains, which accommodates frictional sliding on the phyllosilicate foliation. The pervasive muscovite foliation, which coats all halite grains, prevents significant healing. At high velocities (> 1 μm/s), velocity-weakening frictional behaviour occurs, along with the development of a structureless, intermixed, cataclastic microstructure. The steady state porosity of samples deformed in this regime increases with increasing sliding velocity. We propose that this behaviour involves competition between dilatation due to granular flow and compaction due to pressure solution. Towards higher sliding velocities, dilatation increasingly dominates over pressure solution compaction, so that porosity increases and frictional strength decreases. During periods of zero slip, pressure solution compaction occurs, causing a significant strength increase on reshearing. Our results imply that cataclastic overprinting of mylonitic rocks in natural fault zones does not require any changes in temperature or effective pressure conditions, but can simply result from oscillating fault motion rates. Our healing data suggest that foliated, aseismically creeping fault segments will remain weak and aseismic, whereas segments that have slipped seismically will rapidly re-strengthen and remain in the unstable, velocity-weakening regime. 相似文献
18.
The Norumbega fault system in the Northern Appalachians in eastern Maine experienced complex post-Acadian ductile and brittle deformation from middle through late Paleozoic times. Well-preserved epizonal ductile shear zones in Fredericton belt metasedimentary rocks and granitic batholiths that intrude them provide valuable information on the nature, geometry, and evolution of orogen-parallel strike-slip Norumbega faulting. Metasedimentary rocks were ductilely sheared into phyllonite schistose mylonite, whereas granite into mylonite within the ductile shear zones. Ductile shearing took place at conditions of the lower greenschist facies with peak temperatures on the order of 300–350° based on comparison of plastic quartz and brittle feldspar microstructures, confirming a shallow crustal environment during faulting.Ductile shear strain was partitioned into two major shear zones in easternmost Maine—the Waite and Kellyland zones—but these zones converge toward the southwest. Megascopic, mesoscopic, and microscopic kinematic indicators confirm that fault motion in both zones was dominantly dextral strike-slip. Detailed mapping, especially in the plutonic rocks, reveals a complex ductile deformation history in the area where the Waite and Kellyland zones converge. Shear strain is broadly distributed in the rocks between Kellyland and Waite zones, and increases toward their junction. Multiple dextral high-strain zones oblique to both zones resemble megascopic synthetic c′ shear bands. Together with the Kellyland and Waite master shear zones, these define a megascopic S–C′ structure system produced in a regional-scale dextral strike-slip shear duplex that developed in the transition zone between the deeper (south-central Maine) and shallower (eastern Maine) segments of the Norumbega fault system.Granite plutons caught within the strike-slip shear duplex were intensely sheared and progressively smeared into long and narrow slivers identified by this study. The western lobe of the Deblois pluton and the Lucerne pluton have been recognized as the sources, respectively of the Third Lake Ridge and Morrison Ridge granite slivers. Restoration of both granite slivers to their presumed original positions yields approximately 25 km of dextral strike-slip displacement along only the Kellyland and synthetic ductile shear zones. 相似文献
19.
20.
<正>The Ailao Shan-Red River fault zone is the boundary between the Yangtze block to the northeast and the Indochina block to the southwest.It is an important tectonic zone due to its role in the southeastward extrusion of the Indochina block during and subsequent to the Indian-Eurasian collision.Diancang Shan(DCS) high-grade metamorphic complex,located at the northwest extension along the Ailao Shan-Red River(ASRR) shear zone,is a representative metamorphic complex of the ASRR tectonic belt.Structural and microstructural analysis of sheared rocks in the high-grade metamorphic rocks reveals that they are coherent with solid-state high-temperature ductile deformation,which is attributed to left-lateral shearing along the ASRR shear zone.New LA-ICP-MS zircon U-Pb geochronological and microstructural studies of the post-kinematic granitic plutons provide a straightforward time constraint on the termination ductile left-lateral shearing and exhumation of the metamorphic massif in the ASRR shear zone.It is suggested that the left-lateral shearing along the ASRR shear zone ended at ca.21 Ma at relative lower-temperature or decreasing temperature conditions.During or after the emplacement of the young dikes at ca.21 Ma,rapid brittle deformation event occurred,which makes the DCS massif start fast uplift/exhumation and cooling to a shallow crustal level. 相似文献