首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 62 毫秒
1.
Endosulfan, a chlorinated cyclodiene insecticide is of environmental concern because of its apparent persistence and toxicity to many non target organisms. Endosulfan is hydrophobic and persists in soil for more than a year. To overcome the problem of hydrophobic and limited availability, surfactants play a major role in soil remediation. In the present study, the effect of Tween 80 added to the soil on the degradation of endosulfan by Pseudomonas aeruginosa at different pH (7.0 and 8.5) was studied. The addition of synthetic surfactant Tween 80 enhanced the solubility and degradation of endosulfan. A significant degradation (94%) was observed in pH 8.5 and Tween 80 added soil; the bacterial population in the treatment unit T8 was 75 × 109 CFU/g of soil. The unit T4 inoculated at pH 8.5 showed 86 % alpha and 60 % beta endosulfan degradation, the bacterial population was 73 × 108 CFU / g of soil. The degradation of both the isomers were observed and accompanied with formation of endodiol and endosulfan sulfate.  相似文献   

2.
Remediation with surfactant foam of PCP-contaminated soil   总被引：5，自引：0，他引：5  
An investigation was made into evaluating the capability of surfactants in the form of foam for removing the contaminant pentachlorophenol (PCP), a highly toxic, wood preservative, from soil. Several surfactants were investigated for their ability to make foam. Two of them, Triton X-100 and JBR425 (a rhamnolipid biosurfactant), generated foam with higher quality (99%) and higher stability than other surfactants. Triton X-100 and JBR425 were then used to investigate the removal efficiency in soils contaminated with pentachlorophenol (PCP). Triton X-100 showed better results in terms of final removal efficiency. Triton X-100 (1%) removed 85% and 84% of PCP from fine sand soil and sandy-silt, respectively, contaminated with 1000 mg/kg PCP. These values were 60% and 61% for JBR425 (1%). Of this, 66% and 57% of the PCP was removed by volatilization by Triton X-100 and 36% and 44% by JBR425. Further experiments with Triton X-100 indicated that 1% Triton X-100 removed more than 0.5% and that PCP removal was approximately the same for 1% Triton X-100 for a higher contaminant level (3000 mg/kg) but more pore volumes of foam were required for fine sand (23 pore volumes compared to 12). For the sandy-silt soil, PCP removal was higher for the higher contaminant level, 84% compared to 76%. More pore volumes were required (35 compared to 21). Comparison of liquid and foam injection of 1% Triton X-100 indicated that the foam removed more than twice as much PCP in all cases than the liquid surfactant solution. The results of this study on a sandy and sandy-silt media, thus, found that the foam can be used as a fluid to enhance soil remediation under low pressures compared to other fluids such as liquid surfactant solutions.  相似文献   

3.
Biosurfactants are frequently used in petroleum hydrocarbon and dense non-aqueous phase liquids (DNAPLs) remediation. The applicability of biosurfactant use in clayey soils requires an understanding and characterization of their interaction. Comprehensive effects of surfactants and electrolyte solutions on kaolinite clay soil were investigated for index properties, compaction, strength characteristics, hydraulic conductivities, and adsorption characteristics. Sodium dodecyl sulfate (SDS) and NaPO3 decreased the liquid limit and plasticity index of the test soil. Maximum dry unit weights were increased and optimum moisture contents were decreased as SDS and biosurfactant were added for the compaction tests for mixtures of 30% kaolinite and 70% sand. The addition of non-ionic surfactant, biosurfactant, and CaCl2 increased the initial elastic modulus and undrained shear strength of the kaolinite–sand mixture soils. Hydraulic conductivities were measured by fixed-wall double-ring permeameters. Results showed that the hydraulic conductivity was not significantly affected, but slightly decreased from 1×10−7 cm/s (water) to 0.3×10−7 cm/s for Triton X-100 and SDS. The adsorption characteristics of the chemicals onto kaolinite were also investigated by developing isotherm curves. SDS adsorbed onto soil particles with the strongest bonding strength of the fluids tested. Correlations among parameters were developed for surfactants, electrolyte solutions, and clayey soils.  相似文献   

4.
One large group of persistent and toxic contaminants is the hydrophobic organic contaminants. Among them, perchloroethylene (PCE) has been recognized as a representative group of these pollutants with low solubility. This study reports on the effects of electrokinetic remediation with non-ionic surfactant on PCE-contaminated soil. The performance of electrokinetic process was investigated in the treatment of clay soil that artificially contaminated with two levels: 10,000 and 30,000 mg/kg PCE and 0.33 g/kg Triton X-100. A DC power supply with electric voltage (1 V/cm) was used for 8–16 days. A negatively charged soil surface resulted in a more negative zeta potential and greater electroosmotic flow toward the cathode. The PCE was measured after extraction using n-hexane and analyzed by Fourier transform infrared spectroscopy instrument. The water content of soil was kept 25 % (w/w). Results were shown that PCE removal efficiency achieved was 74 and 89 % for 10,000 and 30,000 mg/kg PCE, respectively, for 16 days. Therefore, in this study, the integration of electrokinetic with non-ionic surfactant as a hybrid method was most effective for the remediation of PCE-contaminated soils.  相似文献   

5.
Sorption of three surfactants and personal care products in four types of commonly occurring Indian soils was extensively studied. The soils used in the study were red soil, clay soil, compost soil and sandy soil as classified by American Society for Testing and Materials (ASTM). The three surfactants used in the study were representative of cationic, non-ionic and anionic surfactant groups. The sorption of surfactants followed the descending order: sodium dodecyl sulphate (SDS) > trimethyl amine (TMA) > propylene glycol (PG). The maximum adsorption capacity (Qmax) was obtained in compost soil (28.6 mg/g for SDS; 9.4 mg/g for TMA and 4 mg/g for PG). The rate of adsorption was the maximum in compost soil followed by clay and red soils, and minimum for sandy soils. It is found that the Freundlich model fits the isotherm data better than the Langmuir model. Freundlich coefficient (K f) increased as the organic content of soils increased. Desorption of target pollutants in tap water was 20–50% whereas acid desorbs 40–90% of target pollutants from soil matrix. It was also found that the adsorption and desorption were significantly affected by the presence of clay and organic matter. The results also indicate that surfactants and personal care products, especially TMA and PG, are highly mobile in sandy soil followed by red soil. Therefore, immobilization of target pollutants is most economical and effective in compost and clayey soils whereas for other type of soils the combination of physiochemical and biological process will be effective option for remediation.  相似文献   

6.
In this research, effect of temperature, pressure, salinity, surfactant concentration, and surfactant type on interfacial tension (IFT) and critical micelle concentration of Saudi Arabian crude oil and various aqueous phases were investigated. The temperature ranged from ambient condition to 90°C, and the pressures were varied from atmospheric to 4,000 psi (27.58 MPa). Surfactant solutions were prepared using several aqueous phases, i.e., purified water, 10% brine consisting of 100% NaCl, 10% brine consisting of 95% NaCl and 5% CaCl2, and 10% brine consisting of 83% NaCl and 17% CaCl2. Out of 13 commercial surfactants, only three surfactants showed good solubility in pure water and brine. Those are Zonyl FSE Fluorosurfactant®, Triton X-100®, and Triton X-405®. Therefore, they were investigated thoroughly by measuring their efficiency in reducing the crude oil-aqueous phase IFT. Based on this screening process, laboratory surfactant flooding experiments for crude oil recovery were conducted using Triton X-405 and Triton X-100. The chemical flood was made at both original oil in place and at residual oil in place subsequent to conventional water flooding. Based on the obtained results, both surfactants were efficient, and more oil was recovered than that obtained through water flooding. Comparing both surfactant solutions, it was observed that Triton X-405 was more efficient than Triton X-100 at the same surfactant concentration and reservoir conditions.  相似文献   

7.
Surfactant-enhanced remediation of contaminated soil: a review   总被引：48，自引：0，他引：48  
Extracting aqueous solutions with or without additives are employed to solubilize contaminants in soil. Since water solubility is the controlling removing mechanism, additives are used to enhance efficiencies. These additives can reduce the time to treat a site compared to the use of water alone. Additives must be of low toxicity and biodegradable. The research in this area has focussed mainly on halogenated volatile organic compounds (VOCs) and is still quite limited for metal removal. Additives include surfactants, organic and inorganic acids, sodium hydroxide, which can dissolve organic soil matter, water-soluble solvents such as methanol, displacement of cations with nontoxic ones, complexing agents such as EDTA, acids in combination with complexing agents or oxidizing/reducing agents. Cationic, anionic and nonionic surfactants are particularly used for soil washing or flushing. They contain both hydrophobic and hydrophilic portions, making them ideal for solubilization of hydrophobic compounds. Numerous studies have indicated that surfactants enhance recoveries of non-aqueous phase liquids (NAPLs). There have also been indications that pretreatment of soil with surfactant washing to solubilize hydrophobic compounds such as PAHs enhances biodegradation of these contaminants. A few in situ field studies have been performed with surfactants. Large-scale treatment has been done mostly for organic removal. Soil pH, soil type, cation exchange capacity (CEC), particle size, permeabilities and contaminants all affect removal efficiencies. High clay and organic matter contents are particularly detrimental. Understanding the chemistry of the binding of the contaminant and the hydrogeology of the site are very important. Once the water is pumped from the soil, it must be extracted and then treated to remove the hydrocarbons and metals. Several technologies exist such as sodium hydroxide or sodium sulfide precipitation, ion exchange, activated carbon adsorption, ultrafiltration, reverse osmosis, electrodialysis and biological processes. Recycling of the surfactants is desired to decrease treatment costs.

This paper will provide an overview of the laboratory research, field demonstration and full-scale application of surfactants for the remediation of contaminated soil. The majority of pilot scale in situ flushing tests, particularly in the United States, have involved the use of surfactants and co-solvents. There are only a few full-scale projects however. Recent laboratory scale efforts by the authors concerning the use of biosurfactants, biologically produced surfactants, to enhance the removal of copper, cadmium and zinc from contaminated soils and sediments are discussed. Three types of biosurfactants were evaluated for their effectiveness. They included a lipopeptide called surfactin from Bacillus subtilis, a rhamnolipid from Pseudomonas aeruginosa and a sophorolipid from Torulopsis bombicola. The results indicated the feasibility of removing the metals with the anionic biosurfactants even though the exchangeable fractions were not significant.  相似文献   


8.
Ulsan mine produced the iron ore minerals of magnetite, arsenopyrite, and scheelite in 1992, and serpentine was developed from 1977 to 2002. The soils of the mine were contaminated by heavy metals such as As, Zn, Ni, and Cd. Heavy metals of Ni and Zn came mostly from serpentinite, and As was derived mainly from arsenopyrite in the scan-type iron ore body. As, Zn, and Ni were major contaminants, but Cd was a minor contaminant on a basis of Korean standard. The heavy metals in the deep depth (>?5 m) came from the host rocks, and those in the shallow depth (<?5 m) were derived from the organic–mineral complexation soil. The remediation plan was a soil washing for highly contaminated soils and the containment of clay materials for less contaminated soils. Even though the remediation methods were successful, the continuous monitoring and the analysis of monitoring data are still necessary for the conservation of soil and groundwater around the study area.  相似文献   

9.
采用Tween80溶液冲洗修复萘污染地下水,分析了Tween80溶液质量浓度和冲洗流速对修复效果的影响,并考察了Tween80溶液对萘的增溶效果及对萘在介质上吸附特性的影响。结果表明：萘和Tween80在中砂介质上的吸附分别符合线性吸附和F型吸附;Tween80增溶萘效果较好,10.0 g/L Tween80溶液中,萘的表观溶解度达到500 mg/L,约为水相饱和溶解度的17倍;确定Tween80洗脱萘的临界解吸质量浓度为2.0 g/L;不同质量浓度、不同冲洗流速修复萘污染地下水实验结果表明,10.0 g/L Tween80溶液、3.0 mL/min流速为最佳冲洗修复参数,萘的去除率达到90%以上。  相似文献   

10.
Contamination of soils with heavy metals is widespread and poses a long-term risk to ecosystem health. Abandoned and active mining sites contain residues from ore-processing operations that are characterised by high concentrations of heavy metals. The distribution and mobility characteristics of heavy metals (As, Cd, Cu, Pb, and Zn) in paddy soil samples from Kočani Field (Macedonia) using ICP-EAS and a sequential extraction procedure was evaluated. The results indicate that highly elevated concentrations of As, Cd, Cu, Pb, and Zn were detected in the paddy soil sample from location VII-2 in the vicinity of Zletovo mine and Zletovska river in the western part of Kočani Field, which drains the untreated acid mine waters and mine wastes from the active Zletovo mine. The degree of contamination based on index of geoaccumulation (I geo) from strong to weak in the paddy soils samples is Pb > As > Cd > Zn > Cu. The mobility potential of heavy metals in all paddy soil samples increases in the order As < Cu < Pb < Zn < Cd. According to the results of the anthropogenic impact on the paddy soils, a further study on the heavy metal concentrations in rice and other edible crops, the remediation process of the paddy soils and a dietary study of the local population are needed.  相似文献   

11.
Surface soil and sediment samples were collected from the surroundings of the Ittehad Chemical Industries Kalashah Kaku industrial zone to assess residual level of 19 organochlorine pesticides (OCPs) and identify their sources. DDTs and HCHs were most prevalent OCPs and general pattern of contamination followed the order: ∑DDT > ∑HCH > dicofol > endrin > heptachlor > dieldrin > endosulfan II. Total measured concentrations of HCHs (6.38–121.71 ng/g) and DDTs (759.65–1811.98 ng/g) were greater in the soil samples collected from fodder/rice fields irrigated with the factory effluents and in the surrounding of waste disposal site. Ratios of β to γ-HCH highlighted an old mixed source of technical HCH and lindane in surface soils. Predominance of p,p′-DDT and p,p′-DDE among isomers and metabolites showed that large quantity of technical grade DDT is still present in the surrounding surface soils. Six soil samples were categorized as heavy polluted soils (class III category of DDT > 1,000 ng/g), two soil samples into less polluted soil between class I and II (50–500 ng/g) and 28 soil samples as non-polluted (<50 ng/g) according to environmental quality standards for surface soils. Six soil samples were categorized as less polluted between class I and II of HCHs (50–500 ng/g). Greater concentration of DDTs and HCHs above quality guideline poses potential exposure risk to biological organisms, safety of agricultural products and human health in the surrounding of the Ittehad Chemical Industries.  相似文献   

12.
Throughout the world, subsurface contamination has become a widespread and pervasive problem. Toxic chemicals such as heavy metals and organic compounds are commonly used in a myriad of industries. However, largely through inadvertent or accidental release, these chemicals are presently polluting sites across the United States. In order to protect public health and the environment, further pollution must be prevented and sites with existing contamination urgently need remediation. Unfortunately, remediating subsurface contamination has proved to be a daunting task. Heavy metals and organic compounds often coexist and their distribution within the subsurface is highly dependent on particle and macro-scale heterogeneities. Vast resources have been invested to develop efficient remediation technologies, yet very few of these technologies have been successful. In-situ remediation is often preferred due to minimal site disturbance, safety, simplicity, and cost-effectiveness. The effectiveness of in-situ remediation technologies depends largely on the contaminant chemistry and subsurface heterogeneities (including particle-scale heterogeneities such as fine-grained soils, soils with reactive minerals, and/or soils rich in organic matter as well as macro-scale heterogeneities such as irregular soil layers and/or lenses). Under such heterogeneous conditions, integrated electrokinetic remediation technology has great potential. As a safe and economical remedial option for so many contaminated sites, the application of integrated electrokinetic remediation offers enormous public health, environmental, and financial benefits.  相似文献   

13.
Microbially produced lipopeptide have been isolated and studied for microbial enhanced oil recovery. About 60 gram positive bacteria isolated from soil contaminated with crude oil, near the crude oil storage tank in Tehran Refinery, Tehran, Iran. However, most of these studies have produced lipopeptide by one of the pure-culture microbes isolated in a laboratory. Among the isolates, heamolytic tests revealed two biosurfactant producers. The isolated strains were designated as C2, E1. By using morphological, biochemical and molecular biology tests (16 SrRNA), the strains identified as Bacillus licheniformis and Bacillus subtitlis, respectively. Emulsification activity and measurement of surface tension indicated that, the isolates were high producers of biosurfactant. The product of C2 and E1 is mainly lipopeptide. This product reduce surface tension from 65 to 30 mN/m. Emulsified activity of crude oil was 92% for C2 and 90 % in case of E1. This is the first report of indigenous Bacillus licheniformis and Bacillus subtilis from a soil contaminated with oil in an Iranian refinery with ability to produce biosurfactant.  相似文献   

14.
采用微波萃取-Florisil固相萃取柱净化分离、气相色谱和气相色谱-质谱相结合的方法测定土壤中的痕量半挥发性有机氯农药。优化了微波萃取和固相萃取柱净化条件,在最优条件下18种有机氯农药(α-HCH、β-HCH、γ-HCH、δ-HCH、七氯、艾氏剂、环氧七氯、硫丹Ⅰ、p,p′-DDE、狄氏剂、异狄氏剂、硫丹Ⅱ、p,p′-DDD、o,p′-DDT、异狄氏剂醛、硫丹硫酸酯、p,p′-DDT、甲氧滴滴涕)的回收率在89.56%~114.22%。对气相色谱和气相色谱-质谱法的仪器检出限、回收率、精密度和方法检出限进行对比,确定了采用气相色谱-质谱定性和气相色谱定量相结合的方法,测定实际土壤样品中的有机氯农药,使得定性和定量的准确度都得到提高。  相似文献   

15.
A crude contaminated soil, arising from an oil production zone in Tabasco, Mexico was studied. A sample of about 40 kg was dried and screened through meshes 10–100. Total petroleum hydrocarbons and 6 metals (Cd, Cu, Cr, Ni, V and Zn) were determined to the different portions. For soil which passed mesh 10, six non-ionic, three anionic and one zwitterionic surfactant solutions (0.5%) were employed to wash the soil. Additional tests using surfactant salt mixtures and surfactants mixtures were carried out. Once the best soil washing conditions were identified, these experimental conditions were applied for washing the rest of the soil portions obtained (meshes 4, 6, 20, 40, 60, 80, 100). Total petroleum hydrocarbons values were in the range of 51, 550 to 192, 130 mg/kg. Cd was not found in any of the soils portions, and the rest of the metals were found at different concentrations, for every soil mesh. Treatability tests applied to the soils indicated that it is possible to get removals between 9.1 to 20.5%. For the case of a sodium dodecyl sulphate 1% solution, total petroleum hydrocarbons removal was as high as 35.4%. Combinations of sodium docecyl sulphate and salts, gave removal rates up to 49.5%. Total petroleum hydrocarbons concentrations for the whole soil were about 150,600 mg/kg. The higher the particle size, the lower the washing removal rate. The combined effect of particle size and total petroleum hydrocarbons concentration, determines the total petroleum hydrocarbons removal efficiencies. These facts are very important for designing an appropriate soil washing remediation process.  相似文献   

16.
The relationship of atrazine-degrading bacteria Arthrobacter sp. HB-5 and nitrogen and phosphorus fertilizer to atrazine degradation and detoxification in soil was investigated in a microcosm pot experiment. Treatments of soil containing atrazine (AW) with atrazine plus strain HB-5 alone (A), together with atrazine and strain HB-5 plus nitrogen alone (AN), phosphate alone (AP), and nitrogen and phosphate together (ANP) were used to investigate atrazine degradation and ecotoxicity. Atrazine residues in the soils were determined by high performance liquid chromatography, while soil ecotoxicity was tested by micronucleus (MN) assay of Vicia faba root tip cells. The results showed that degradation of atrazine in soil could be facilitated by the treatment of strain HB-5 as well as strain HB-5 application with the addition of nitrogenous and/or phosphorus fertilizers. The degradation rates varied as the following: ANP > AP > AN > A > AW in different treatments. At 10 days post treatment, degradation efficiency of over 90 % was achieved in all strain HB-5 treatments except AW, but with no statistically significant differences found between treatments. Soil ecotoxicity was significantly reduced along with the degradation of atrazine by strain HB-5, and the ecotoxicity of soils with applied fertilizer was below that of treatments without fertilizer. On the seventh day and later, the MN frequencies of all treatments were decreased in the control levels except for AW. Thus, adjusting soil nutrient contents not only promoted strain HB-5 to remove atrazine in soil but also mitigated soil ecotoxicity effects caused by atrazine. These results are important keystones for future remediation of atrazine-contaminated soils.  相似文献   

17.
The aim of this study was to evaluate the release kinetics, speciation, and fractionation of boron (B) in some calcareous soils of western Iran. Ten surface soil samples were incubated with 100 mg B kg?1 for a week at field capacity moisture. After air drying of samples, the trend of B release was experimented using sequential extraction with 10 mM CaCl2. B speciation in soil solution was calculated for the first and the last steps of extraction by the visual MINTEQ program. The distribution of B among five fractions including exchangeable (F1), specially adsorbed (F2), bound by Fe–Mn oxides (F3), organically bound (F4) and residual (F5), was determined in control and spiked soils. The results indicated that the release rates were initially rapid followed by a slower reaction and the main proportion of the added B was extracted by CaCl2. The release kinetics of B was described well with Elovich, parabolic diffusion, power function, and first-order equations. The speciation results revealed that the uncharged boric acid (H3BO 3 0 ) was the dominant species in soil solutions. In control soils, B concentration in different fractions decreased in the following order: F5 > F1 > F2 > F3 > F4. In spiked soils, however, the largest and the smallest fractions were exchangeable and residual, respectively. This implies that B transformation from soluble to less mobile and non-labile forms is not a rapid process and requires more than a week. The significant relationship observed between kinetic parameters of power and parabolic equations and organically bound B fraction and OM content indicated that organic matter played an important role in B adsorption and release in calcareous soils.  相似文献   

18.
研究了固定配比的钠化膨润土与土壤在不同pH条件下对重金属离子的吸附效果。钠化膨润土与污染土壤按质量比1∶10和1∶20的比例混合,用碳酸氢铵-二乙三胺五乙酸(AB-DTPA)法提取土壤中有效态重金属。结果表明,在钠化膨润土与土壤质量比为1∶20的条件下,取得了最佳的修复效果;在pH=9.14时该混合土壤对重金属的总体吸附效果最佳。在实际土壤修复中,针对不同重金属污染,应灵活调整修复材料与污染土壤的配比和土壤的pH条件。  相似文献   

19.
土壤中可挥发性污染物清除的离心试验研究   总被引：2，自引：1，他引：1  
郝荣福  胡黎明  邢巍巍 《岩土力学》2004,25(7):1037-1040
土工离心模拟试验技术是研究环境岩土工程问题的有效手段。本文研究了非水相流体污染物在非饱和土中的迁移以及随后的抽气清除过程。 当离心机运行到要求的加速度时,汽油污染物从地下油罐中释放并在非饱和土中迁移一年,之后采用土壤通气法对污染土壤进行修复。对土壤取样分析,得到污染物在土体中的迁移规律和分布特征。试验结果表明,土壤通气法可以清除非饱和土体中的挥发性有机污染物,是一种有效的原位土壤修复技术。  相似文献   

20.
The aim of this study was to select the appropriate surfactant for the remediation of dichlorodiphenyltrichloroethane-contaminated soil using an in situ foam-flushing technique. The research investigated the performance of the nonionic surfactants polyethylene glycol octyl phenyl ether, polysorbate, and polyoxyethylene lauryl ether, as well as the anionic surfactant sodium dodecyl sulfate, in foam static characteristics, solubility enhancement of dichlorodiphenyltrichloroethane, adsorption loss onto soil, and dichlorodiphenyltrichloroethane desorption from contaminated soil using a foam-flushing approach. Considering the above four criteria, the overall performance suggested polyethylene glycol octyl phenyl ether should be selected for the remediation of dichlorodiphenyltrichloroethane-contaminated soil due to its better foamability and stability, relatively high solubilization ability for dichlorodiphenyltrichloroethane, and greatest contaminant desorption efficiency from soil via foam flushing. Results of the dichlorodiphenyltrichloroethane desorption experiments showed that desorption efficiency of dichlorodiphenyltrichloroethane by different surfactants was largely influenced by foam static characteristics and solubility enhancement of dichlorodiphenyltrichloroethane rather than adsorption loss onto soil, which indicated that foam static characteristics and solubilization ability of surfactants were two key criteria for selection of high-performance foam surfactant.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号