首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
During 2003–2006, a pilot project of alternating water and CO2 injection was performed on a limited part of the Upper Miocene sandstone oil reservoir of the Ivani? Field. During the test period oil and gas recovery was significantly increased. Additionally 4,440 m3 of oil and 2.26 × 106 m3 of gas were produced. It has initiated further modelling of sandstone reservoirs in the Ivani? Field in order to calculate volumes available for CO2 injection for the purpose of increasing hydrocarbon production from depleted sandstone reservoirs in the entire Croatian part of the Pannonian Basin System. In the first phase, modelling was based on results of laboratory testing on the core samples. It considered applying analogies with world-known projects of CO2 subsurface storage and its usage to enhance hydrocarbon production. In the second phase, reservoir variables were analysed by variograms and subsequently mapped in order to reach lithological heterogeneities and to determine reliable average values of reservoir volumes. Data on porosity, depth and reservoir thickness for the “Gamma 3” and the “Gamma 4” reservoirs, are mapped by the ordinary kriging technique. Calculated volume of CO2 expressed at standard condition which can be injected in the main reservoirs of the Ivani? Field at near miscible conditions is above 15.5 billion m3.  相似文献   

2.
The present paper provides a case study of the assessment of the potential for CO2 storage in the deep saline aquifers of the Bécancour region in southern Québec. This assessment was based on a hydrogeological and petrophysical characterization using existing and newly acquired core and well log data from hydrocarbon exploration wells. Analyses of data obtained from different sources provide a good understanding of the reservoir hydrogeology and petrophysics. Profiles of formation pressure, temperature, density, viscosity, porosity, permeability, and net pay were established for Lower Paleozoic sedimentary aquifers. Lateral hydraulic continuity is dominant at the regional scale, whereas vertical discontinuities are apparent for most physical and chemical properties. The Covey Hill sandstone appears as the most suitable saline aquifer for CO2 injection/storage. This unit is found at a depth of more than 1 km and has the following properties: fluid pressures exceed 14 MPa, temperature is above 35 °C, salinity is about 108,500 mg/l, matrix permeability is in the order of 3 × 10?16 m2 (0.3 mDarcy) with expected higher values of formation-scale permeability due to the presence of natural fractures, mean porosity is 6 %, net pay reaches 282 m, available pore volume per surface area is 17 m3/m2, rock compressibility is 2 × 10?9 Pa?1 and capillary displacement pressure of brine by CO2 is about 0.4 MPa. While the containment for CO2 storage in the Bécancour saline aquifers can be ensured by appropriate reservoir characteristics, the injectivity of CO2 and the storage capacity could be limiting factors due to the overall low permeability of aquifers. This characterization offers a solid basis for the subsequent development of a numerical hydrogeological model, which will be used for CO2 injection capacity estimation, CO2 injection scenarios and risk assessment.  相似文献   

3.
CO2 pilot injection studies, with site-specific geologic assessment and engineering reservoir design, can be instrumental for demonstrating both incremental enhanced oil recovery and permanent geologic storage of greenhouse gases. The purpose of this paper is to present the geologic and reservoir analyses in support of a field pilot test that will evaluate the technical and economic feasibility of commercial-scale CO2-enhanced oil recovery to increase oil recovery and extend the productive life of the Citronelle Oil Field, the largest conventional oil field in Alabama (SE USA). Screening of reservoir depth, oil gravity, reservoir pressure, reservoir temperature, and oil composition indicates that the Cretaceous-age Donovan sand, which has produced more than 169 × 106 bbl in Citronelle Oil Field, is amenable to miscible CO2 flooding. The project team has selected an 81 ha (200 ac) 5-spot test site with one central gas injector, two producers, and two initially temporarily abandoned production wells that are now in production. Injection is planned in two separate phases, each consisting of 6,804 t (7,500 short tons) of food-grade CO2. The Citronelle Unit B-19-10 #2 well (Permit No. 3232) is the CO2 injector for the first injection test. The 14-1 and 16-2 sands of the upper Donovan are the target zones. These sandstone units consist of fine to medium-grained sandstone that is enveloped by variegated mudstone. Both of these sandstone units were selected based on the distribution of perforated zones in the test pattern, production history, and the ability to correlate individual sandstone units in geophysical well logs. The pilot injections will evaluate the applicability of tertiary oil recovery to Citronelle Field and will provide a large volume of information on the pressure response of the reservoirs, the mobility of fluids, time to breakthrough, and CO2 sweep efficiency. The results of the pilot injections will aid in the formulation of commercial-scale reservoir management strategies that can be applied to Citronelle Field and other geologically heterogeneous oil fields and the design of similar pilot injection projects.  相似文献   

4.
Frontier exploration in the Kuqa Depression, western China, has identified the continuous tight-sand gas accumulation in the Lower Cretaceous and Lower Jurassic as a major unconventional gas pool. However, assessment of the shale gas resource in the Kuqa Depression is new. The shale succession in the Middle–Upper Triassic comprises the Taliqike Formation (T3t), the Huangshanjie Formation (T3h) and the middle–upper Karamay Formation (T2–3k), with an average accumulated thickness of 260 m. The high-quality shale is dominated by type III kerogen with high maturity and an average original total organic carbon (TOC) of about 2.68 wt%. An improved hydrocarbon generation and expulsion model was applied to this self-contained source–reservoir system to reveal the gas generation and expulsion (intensity, efficiency and volume) characteristics of Middle–Upper Triassic source rocks. The maximum volume of shale gas in the source rocks was obtained by determining the difference between generation and expulsion volumes. The results indicate that source rocks reached the hydrocarbon expulsion threshold of 1.1% VR and the hydrocarbon generation and expulsion reached their peak at 1.0% VR and 1.28% VR, with the maximum rate of 56 mg HC/0.1% TOC and 62.8 mg HC/0.1% TOC, respectively. The volumes of gas generation and expulsion from Middle–Upper Triassic source rocks were 12.02 × 1012 m3 and 5.98 × 1012 m3, respectively, with the residual volume of 6.04 × 1012 m3, giving an average gas expulsion efficiency of 44.38% and retention efficiency of 55.62%. Based on the gas generation and expulsion characteristics, the predicted shale gas potential volume is 6.04 × 1012 m3, indicating a significant shale gas resource in the Middle–Upper Triassic in the eastern Kuqa Depression.  相似文献   

5.
A mathematical model was developed to predict the coal bed methane (CBM) production and carbon dioxide (CO2) sequestration in a coal seam accounting for the coal seam properties. The model predictions showed that, for a CBM production and dewatering process, the pressure could be reduced from 15.17 MPa to 1.56 MPa and the gas saturation increased up to 50% in 30 years for a 5.4 × 105 m2 of coal formation. For the CO2 sequestration process, the model prediction showed that the CO2 injection rate was first reduced and then slightly recovered over 3 to 13 years of injection, which was also evidenced by the actual in seam data. The model predictions indicated that the sweeping of the water in front of the CO2 flood in the cleat porosity could be important on the loss of injectivity. Further model predictions suggested that the injection rate of CO2 could be about 11 × 103 m3 per day; the injected CO2 would reach the production well, which was separated from the injection well by 826 m, in about 30 years. During this period, about 160 × 106 m3 of CO2 could be stored within a 21.4 × 105 m2 of coal seam with a thickness of 3 m.  相似文献   

6.
Deep brine recovery enhanced by supercritical CO2 injection is proposed to be a win–win method for the enhancement of brine production and CO2 storage capacity and security. However, the cross-flow through interlayers under different permeability conditions is not well investigated for a multi-layer aquifer system. In this work, a multi-layer aquifer system with different permeability conditions was built up to quantify the brine production yield and the leakage risk under both schemes of pure brine recovery and enhanced by supercritical CO2. Numerical simulation results show that the permeability conditions of the interlayers have a significant effect on the brine production and the leakage risk as well as the regional pressure. Brine recovery enhanced by supercritical CO2 injection can improve the brine production yield by a factor of 2–3.5 compared to the pure brine recovery. For the pure brine recovery, strong cross-flow through interlayers occurs due to the drastic and extensive pressure drop, even for the relative low permeability (k = 10?20 m2) mudstone interlayers. Brine recovery enhanced by supercritical CO2 can successfully manage the regional pressure and decrease the leakage risk, even for the relative high permeability (k = 10?17 m2) mudstone interlayers. In addition, since the leakage of brine mainly occurs in the early stage of brine production, it is possible to minimize the leakage risk by gradually decreasing the brine production pressure at the early stage. Since the leakage of CO2 occurs in the whole production period and is significantly influenced by the buoyancy force, it may be more effective by adopting horizontal wells and optimizing well placement to reduce the CO2 leakage risk.  相似文献   

7.
We estimated CO2 and CH4 emissions from mangrove-associated waters of the Andaman Islands by sampling hourly over 24 h in two tidal mangrove creeks (Wright Myo; Kalighat) and during transects in contiguous shallow inshore waters, immediately following the northeast monsoons (dry season) and during the peak of the southwest monsoons (wet season) of 2005 and 2006. Tidal height correlated positively with dissolved O2 and negatively with pCO2, CH4, total alkalinity (TAlk) and dissolved inorganic carbon (DIC), and pCO2 and CH4 were always highly supersaturated (330–1,627 % CO2; 339–26,930 % CH4). These data are consistent with a tidal pumping response to hydrostatic pressure change. There were no seasonal trends in dissolved CH4 but pCO2 was around twice as high during the 2005 wet season than at other times, in both the tidal surveys and the inshore transects. Fourfold higher turbidity during the wet season is consistent with elevated net benthic and/or water column heterotrophy via enhanced organic matter inputs from adjacent mangrove forest and/or the flushing of CO2-enriched soil waters, which may explain these CO2 data. TAlk/DIC relationships in the tidally pumped waters were most consistent with a diagenetic origin of CO2 primarily via sulphate reduction, with additional inputs via aerobic respiration. A decrease with salinity for pCO2, CH4, TAlk and DIC during the inshore transects reflected offshore transport of tidally pumped waters. Estimated mean tidal creek emissions were ～23–173 mmol m?2 day?1 CO2 and ～0.11–0.47 mmol m?2 day?1 CH4. The CO2 emissions are typical of mangrove-associated waters globally, while the CH4 emissions fall at the low end of the published range. Scaling to the creek open water area (2,700 km2) gave total annual creek water emissions ～3.6–9.2?×?1010 mol CO2 and 3.7–34?×?107 mol CH4. We estimated emissions from contiguous inshore waters at ～1.5?×?1011 mol CO2?year?1 and 2.6?×?108 mol CH4?year?1, giving total emissions of ～1.9?×?1011 mol CO2?year?1 and ～3.0?×?108 mol CH4?year?1 from a total area of mangrove-influenced water of ～3?×?104 km2. Evaluating such emissions in a range of mangrove environments is important to resolving the greenhouse gas balance of mangrove ecosystems globally. Future such studies should be integral to wider quantitative process studies of the mangrove carbon balance.  相似文献   

8.
In this study, CO2 storage capacity in unmineable coalbeds in China at depths of 1,000–2,000 m has been evaluated using the methodology recommended by CSLF. This evaluation is one part of the countrywide CO2 storage capacity evaluations in China, initiated by the Chinese Ministry of Land and Resources. This level of CO2 storage capacity evaluation gives a rough scale of assessment with the least site-specific detail. The results show that there is a storage capacity of 98.81 × 108 t CO2 in coalbeds buried at a depth range of 1,000–2,000 m and 4.26 × 1012 m3 additional coalbed methane can be recovered by CO2 injection. These results appear to show great potential and an attractive economic perspective of CO2 storage in unmineable coalbeds in China. Another part of this study is to classify the potential coalbed basins based on CO2 storage capacity and storage capacity per unit area. The study results reveal the distribution of the most potential basins for large-scale CO2 storage and the best economic basins for early CO2 storage in the future.  相似文献   

9.
Radon gas is a human health hazard; long-term exposure to high radon concentrations through inhalation is the second leading cause of lung cancer. Nova Scotia has been previously identified as a potential high risk region because of the geology. As such, the gas transport through Halifax’s fine grained leucomonzogranite (FGL) unit of the South Mountain Batholith needed to be quantified to further remediation efforts. Using controlled laboratory experiments, four different soil columns were created using the Halifax Regional Municipality’s (HRM) highest producing field tills and bedrock. Permeability, diffusivity, radon-222 gas concentrations, and gas transit time/speed were measured in both dry tills (field moisture) and wet tills (simulated rain event moisture). Columns with HRM till displayed the highest radon concentrations, and were less permeable with additional moisture. Radon diffusivity calculated from CO2 was 7.52 × 10?8 m2 (dry), and 3.37 × 10?8 m2 (wet); diffusivity calculated from 222Rn was 7.30 × 10?7 m2 (dry), and 6.47 × 10?7 m2 (wet). The average FGL transit time in a 60 cm column was 3.57 days (dry), and 3.82 days (wet). Locally this study presents two different methods for diffusivity calculations, for a unit lacking previous diffusivity information. The radon gas concentrations and transport speeds quantified the transport mechanisms within the till. Globally, the correlation between soil moisture, and radon/permeability values was established using these results. The link between diffusivity and permeability was also confirmed using field tills. Implications were made for building foundations, as well as the depth and type of material necessary to reduce radon gas from reaching the surface.  相似文献   

10.
《International Geology Review》2012,54(14):1792-1812
Abundant crude oil and CO2 gas coexist in the fourth member of the Upper Cretaceous Quantou reservoir in the Huazijing Step of the southern Songliao Basin, China. Here, we present results of a petrographic characterization of this reservoir based on polarizing microscope, X-ray diffraction, fluid inclusion, and carbon–oxygen isotopic data. These data were used to identify whether CO2 might be trapped in minerals after the termination of a CO2-enhanced oil recovery (EOR) project, and to determine what effects might the presence of CO2 have on the properties of crude oil in the reservoir. The crude oil reservoir in the study area, which coexists with mantle-derived CO2, is hosted by dawsonite-bearing lithic arkoses and feldspathic litharenites. These sediments are characterized by a paragenetic sequence of clay, quartz overgrowth, first-generation calcite, dawsonite, second-generation calcite, and ankerite. The dawsonite analysed during this study exhibits δ13 C (Peedee Belemnite, PDB) values of ?4.97‰ to 0.67‰, which is indicative for the formation of magmatic–mantle CO2. The paragenesis and compositions of fluid inclusions in the dawsonite-bearing sandstones record a sequence of two separate filling events, the first involving crude oil and the second involving magmatic–mantle CO2. The presence of prolate primary hydrocarbon inclusions within the dawsonite indicates that these minerals precipitated from oil-bearing pore fluids at temperatures of 94–97°C, in turn suggesting that CO2 could be stored as carbonate minerals after the termination of a CO2-EOR project. In addition, the crude oil in the basin would become less dense after deposition of bitumen by deasphalting the injection of CO2 gas into the oil pool.  相似文献   

11.
This paper studied the CO2-EGR in Altmark natural gas field with numerical simulations. The hydro-mechanical coupled simulations were run using a linked simulator TOUGH2MP-FLAC3D. In order to consider the gas mixing process, EOS7C was implemented in TOUGH2MP. A multi-layered 3D model (4.4 km × 2 km × 1 km) which consists of the whole reservoir, caprock and base rock was generated based on a history-matched PETREL model, originally built by GDF SUEZ E&P Deutschland GmbH for Altmark natural gas field. The model is heterogeneous and discretized into 26,015 grid blocks. In the simulation, 100,000 t CO2 was injected in the reservoir through well S13 within 2 years, while gas was produced from the well S14. Some sensitivity analyses were also carried out. Simulation results show that CO2 tends to migrate toward the production well S14 along a NW–SE fault. It reached the observation wells S1 and S16 after 2 years, but no breakthrough occurred in the production well. After 2 years of CO2 injection, the reservoir pressure increased by 2.5 bar, which is beneficial for gas recovery. The largest uplift (1 mm) occurred at the bottom of the caprock. The deformation was small (elastic) and caprock integrity was not affected. With the injection rate doubled the average pressure increased by 5.3 bar. Even then the CO2 did not reach the production well S14 after 2 years of injection. It could be concluded that the previous flow field was established during the primary gas production history. This former flow field, including CO2 injection/CH4 production rate during CO2-EGR and fault directions and intensity are the most important factors affecting the CO2 transport.  相似文献   

12.
李玮  师庆三  董海海  侯锐 《中国地质》2022,49(2):485-495
[研究目的]克拉玛依油田X区克下组低渗透油藏存在物性差、水驱开发采收率低等问题,影响了油田的可持续发展.CO2是全球变暖的主要成分,世界各国都在想方设法减少CO2的排放量,本文试图利用CO2驱油气方式提高该油藏的采收率,变害为利.[研究方法]文章选取研究区60余口取心井目标层位岩心样品,开展扫描电镜及压汞测试分析等研究...  相似文献   

13.
In this paper the ability of analytical solutions for four-component three-phase flow to predict displacement efficiency in water alternating gas (WAG) injection processes is studied. First analytical solutions for Riemann problems with injection compositions that are the average water and gas mixture for various WAG injection schemes are presented. These solutions are compared to numerical calculations with variable slug sizes and used to explore the effect of slug size, injecting water vs gas first, and the average injection composition on displacement efficiency in compositional WAG schemes. The example model is partially miscible WAG injection of water and CO2 into an oil reservoir containing C10 and CH4 with and without a mobile aqueous phase present initially. The trailing end of the water and gas profiles are sensitive to whether water or gas is injected first, but the magnitude of the oil bank and the breakthrough time of the injected fluids are accurately predicted by the analytical solutions, even for displacements where large water and gas slugs are injected. Fluctuations in the saturation and composition profiles resulting from the alternating injection sequence in the WAG simulations appear as super-imposed on top of the sequence of rarefaction and shock waves predicted by analytical solutions. As the number of slugs increases, the effect of alternating boundary conditions diminishes and the displacements predicted by numerical calculations converge to the analytical solutions.  相似文献   

14.
综合钻井、大量实测剖面、样品测试分析和区域地质资料，对西昌盆地白果湾组烃源岩生烃强度、镜质体反射率、砂岩储层物性等关键指标进行了系统评价。西昌盆地上三叠统白果湾组主要油气储层类型为中-粗砂岩，有利层段主要发育在白果湾组一段、三段和四段，砂岩具有中孔低渗、区域分布广、厚度大等特征，ZD-1井揭示砂岩含油气性好。西昌盆地白果湾组烃源岩在盆地中心厚度大，盆地中心的生烃强度达（56.74~97.70）×108 m3/km2。烃源岩成熟度（RO）在1.08%~3.98%范围，具有东低西高的特征。通过综合分析西昌盆地油气形成的关键指标，优选了夹铁-四开致密砂岩油气成藏有利区和4个甜点区，该区生烃强度（10~80）×108m3/km2，RO为1.08%~3.0%，中-粗砂岩厚度为10~50m，天然气资源量为6756×108m3，可形成"改造再重建"致密砂岩油气藏。  相似文献   

15.
The Upper Paleozoic section contains a tight gas sandstone reservoir (of 2.75 × 1012 m3) in the Ordos Basin, central China. The measured porosities (< 10%) and permeabilities (generally < 1 mD) are the result of significant mechanical and chemical compaction and precipitation of carbonate, quartz and authigenic clay cements. Fluid inclusion geochemistry and kinetic modeling (generation of gaseous components and δ13C1) were integrated to constrain the timing of gas charge into the tight reservoir. The modeling results indicate that the natural gases in the present reservoir are similar to gases liberated from quartz inclusions in both composition and stable carbon isotope values and also similar to gas generated from Upper Paleozoic coal. The similar geochemistry suggests that an important phase of quartz cementation must have occurred after gas emplacement in the reservoirs during regional uplift at the end of the Cretaceous. The latest carbonate cement, postdating quartz cementation, consumed most of the late CO2 generated from coal at high maturity (RO > 1.7%) and reduced the reservoir quality dramatically. On the contrary, tight sandstones from non-producing areas have fluid inclusions that were trapped in quartz cements much earlier. These data indicate that natural gas migrated into the Upper Paleozoic reservoir when it still retained high porosity and permeability. The reservoir continued to experience porosity and permeability reduction from continued quartz and carbonate cementation after gas charging due to low gas saturation. Comparison of the relative timing of gas charging with that of sandstone cementation can help to predict areas of risk during tight gas exploration and development.  相似文献   

16.
The delivery of dissolved carbon from rivers to coastal oceans is an important component of the global carbon budget. From November 2013 to December 2014, we investigated freshwater-saltwater mixing effects on dissolved carbon concentrations and CO2 outgassing at six locations along an 88-km-long estuarine river entering the Northern Gulf of Mexico with salinity increasing from 0.02 at site 1 to 29.50 at site 6 near the river’s mouth. We found that throughout the sampling period, all six sites exhibited CO2 supersaturation with respect to the atmospheric CO2 pressure during most of the sampling trips. The average CO2 outgassing fluxes at site 1 through site 6 were 162, 177, 165, 218, 126, and 15 mol m?2 year?1, respectively, with a mean of 140 mol m?2 year?1 for the entire river reach. In the short freshwater river reach before a saltwater barrier, 0.079 × 108 kg carbon was emitted to the atmosphere during the study year. In the freshwater-saltwater mixing zone with wide channels and river lakes, however, a much larger amount of carbon (3.04 × 108 kg) was emitted to the atmosphere during the same period. For the entire study period, the river’s freshwater discharged 0.25 × 109 mol dissolved inorganic carbon (DIC) and 1.77 × 109 mol dissolved organic carbon (DOC) into the mixing zone. DIC concentration increased six times from freshwater (0.24 mM) to saltwater (1.64 mM), while DOC showed an opposing trend, but to a lesser degree (from 1.13 to 0.56 mM). These findings suggest strong effects of freshwater-saltwater mixing on dissolved carbon dynamics, which should be taken into account in carbon processing and budgeting in the world’s estuarine systems.  相似文献   

17.
Sequestration of CO2 into a deep geological reservoir causes a complex interaction of different processes such as multiphase flow, phase transition, multicomponent transport, and geochemical reactions between dissolved CO2 and the mineral matrix of the porous medium. A prognosis of the reservoir behaviour and the feedback from large-scale geochemical alterations require efficient process-based numerical models. For this purpose, the multiphase flow and multicomponent transport code OpenGeoSys-Eclipse have been coupled to the geochemical model ChemApp. The newly developed coupled simulator was successfully verified for correctness and accuracy of the implemented reaction module by benchmarking tests. The code was then applied to assess the impact of geochemical reactions during CO2 sequestration at a hypothetical but typical Bunter sandstone formation in the Northern German Basin. Injection and spreading of 1.48 × 107 t of CO2 in an anticline structure of the reservoir were simulated over a period of 20 years of injection plus 80 years of post-injection time. Equilibrium geochemical calculations performed by ChemApp show only a low reactivity to the geochemical system. The increased acidity of the aqueous solution results in dissolution of small amounts of calcite, anhydrite, and quartz. Geochemical alterations of the mineral phase composition result in slight increases in porosity and permeability, which locally may reach up to +0.02 and 0.1 %, respectively.  相似文献   

18.
Very limited investigations have been done on the numerical simulation of carbon dioxide (CO2) migration in sandstone aquifers taking consideration of the interactions between fluid flow and rock stress. Based on the poroelasticity theory and multiphase flow theory, this study establishes a mathematical model to describe CO2 migration, coupling the flow and stress fields. Both finite difference method (FDM) and finite element method (FEM) were used to discretize the mathematical model and generate a numerical model. A case study was carried out using the numerical model on the Jiangling sandstone aquifer in the Jianghan basin, China. The rock mechanics parameters of reservoir and overlying strata of Jiangling depression were obtained by triaxial tests. A two-dimensional model was then built to simulate carbon dioxide migration in the sandstone aquifer. The numerical simulation analyzes the carbon dioxide migration distribution rule with and without considering capillary pressure. Time-dependent migration of CO2 in the sandstone aquifer was analyzed, and the result from the coupled model was compared with that from a traditional non-coupled model. The calculation result indicates a good consistency between the coupled model and the non-coupled model. At the injection point, the CO2 saturation given by the coupled model is 15.39 % higher than that given by the non-coupled model; while the pore pressure given by the coupled model is 4.8 % lower than that given by the non-coupled model. Therefore, it is necessary to consider the coupling of flow and stress fields while simulating CO2 migration for CO2 disposal in sandstone aquifers. The result from the coupled model was also sensitized to several parameters including reservoir permeability, porosity, and CO2 injection rate. Sensitivity analyses show that CO2 saturation is increased non-linearly with CO2 injection rate and decreased non-linearly with reservoir porosity. Pore pressure is decreased non-linearly with reservoir porosity and permeability, and increased non-linearly with CO2 injection rate. When the capillary pressure was considered, the computed gas saturation of carbon dioxide was increased by 10.75 % and the pore pressure was reduced by 0.615 %.  相似文献   

19.
The present analysis adjusts previous estimates of global ocean CaCO3 production rates substantially upward, to 133 × 1012 mol yr?1 plankton production and 42 × 1012 mol yr?1 shelf benthos production. The plankton adjustment is consistent with recent satellite-based estimates; the benthos adjustment includes primarily an upward adjustment of CaCO3 production on so-called carbonate-poor sedimentary shelves and secondarily pays greater attention to high CaCO3 mass (calcimass) and turnover of shelf communities on temperate and polar shelves. Estimated CaCO3 sediment accumulation rates remain about the same as they have been for some years: ~20 × 1012 mol yr?1 on shelves and 11 × 1012 mol yr?1 in the deep ocean. The differences between production and accumulation of calcareous materials call for dissolution of ~22 × 1012 mol yr?1 (~50 %) of shelf benthonic carbonate production and 122 × 1012 mol yr?1 (>90 %) of planktonic production. Most CaCO3 production, whether planktonic or benthonic, is assumed to take place in water depths of <100 m, while most dissolution is assumed to occur below this depth. The molar ratio of CO2 release to CaCO3 precipitation (CO2↑/CaCO3↓) is <1.0 and varies with depth. This ratio, Ψ, is presently about 0.66 in surface seawater and 0.85 in ocean waters deeper than about 1000 m. The net flux of CO2 associated with CaCO3 reactions in the global ocean in late preindustrial time is estimated to be an apparent influx from the atmosphere to the ocean, of +7 × 1012 mol C yr?1, at a time scale of 102–103 years. The CaCO3-mediated influx of CO2 is approximately offset by CO2 release from organic C oxidation in the water column. Continuing ocean acidification will have effects on CaCO3 and organic C metabolic responses to the oceanic inorganic C cycle, although those responses remain poorly quantified.  相似文献   

20.
The Huntly coalfield has significant coal deposits that contain biogenically-sourced methane. The coals are subbituminous in rank and Eocene in age and have been previously characterised with relatively low to moderate measured gas (CH4) contents (2–4 m3/ton). The CO2 holding capacity is relatively high (18.0 m3/ton) compared with that of CH4 (2.6 m3/ton) and N2 (0.7 m3/ton) at the same pressure (4 MPa; all as received basis). The geothermal gradient is also quite high at 55 °C/km.A study has been conducted which simulates enhancement of methane recovery (ECBM) from these deposits using a new version of the TOUGH2 (version 2) reservoir simulator (ECBM-TOUGH2) that can handle non-isothermal, multi-phase flows of mixtures of water, CH4, CO2 and N2. The initial phase of the simulation is CH4 production for the first 5 years of the field history. The model indicates that methane production can be significantly improved (from less than 80% recovery to nearly 90%) through injection of CO2. However, although an increase in the rate of CO2 injection increases the amount of CO2 sequestered, the methane recovery (because of earlier breakthrough with increasing injection rate) decreases. Modeling of pure N2 injection produced little enhanced CH4 production. The injection of a hypothetical flue gas mixture (CO2 and N2) also produced little increase in CH4 production. This is related to the low adsorption capacity of the Huntly coal to N2 which results in almost instantaneous breakthrough into the production well.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号