共查询到20条相似文献，搜索用时 531 毫秒
1.
The Nyctosaurus specimen KJ1 was reconstructed under the hypothesis that there is a membrane attached to the crest; the so-called headsail crest. The aerodynamic forces and moment acting on the headsail crest were analyzed. It was shown that KJ1 might adjust the angle of the headsail crest relative to the air current as one way to generate thrust (one of the aerodynamic forces, used to overcome body drag in forward flight) and that the magnitude of the thrust and moment could vary with the gesture angle and the relative location between the aerodynamic center of the headsail crest and body’s center of gravity. Three scenarios were tested for comparison: the crest with membrane attachment, the crest without membrane attachment and the absence of a cranial crest. It was shown that the aerodynamic characteristics (increasing, maintaining and decreasing thrusts and moment) would have almost disappear in flight for the crest without membrane attachment and was non-existent without the cranial crest. It is suggested from aerodynamics evidence alone that Nyctosaurus specimen KJ1 had a membrane attached to the crest and used this reconstructed form for auxiliary flight control. 相似文献
2.
XING Li WANG Yikun Eric SNIVELY ZHANG Jianping DONG Zhiming Michael E. BURNS Philip J. CURRIE 《《地质学报》英文版》2015,89(1):1-11
The paired cranial crests of Sinosaurus(Theropoda) have been hypothesized as too weak to resist mechanical loads during combat. Finite element analysis(FEA) is used to test this hypothesis, first with geometry obtained through direct laser scanning of a well-preserved fossil of the crest, and then with two conceptual FE models of both crests analyzing the structure-deformation effects of fenestration. In the original fossil model, under direct loading on the dorsal faces of the crest, we found that the areas surrounding cavities on the crest experience shear stress that implies a high chance of material failure – the fracture of bone. In the conceptual model, a series of computational studies were conducted with varying loading directions. One simulation found that the shear stress and strain in the material around the cavity presented more deformation compared with the conceptual model without the cavities, and under this morphologically realistic scenario the loading conditions would result in local bone fractures. These model-based computational results indicate that the crest could not resist high loads, because it could not effectively decentralize the loading stress. Future investigations need to focus on more comprehensive computational experiments with more conditions, e.g. dynamical loading conditions, and direct palaeontological evidence. 相似文献
3.
XING Lida WU Jianghao LU Yi L Junchang JI Qiang Institute of Geology Chinese Academy of Geological Sciences Beijing China School of Transportation Science Engineering Beijing University of Aeronautics Astronautics Beijing China 《《地质学报》英文版》2009,83(1)
The Nyctosaurus specimen KJ1 was reconstructed under the hypothesis that there is a membrane attached to the crest;the so-called headsail crest.The aerodynamic forces and moment acting on the headsail crest were analyzed.It was shown that KJ1 might adjust the angle of the headsail crest relative to the air current as one way to generate thrust (one of the aerodynamic forces,used to overcome body drag in forward flight) and that the magnitude of the thrust and moment could vary with the gesture angle and ... 相似文献
4.
《Sedimentology》2018,65(6):1859-1874
Ripples are prevalent in aeolian landscapes. Many researchers have focused on the shape and formation of sand ripples, but few have studied the differences in the particle size of sand on crests and in troughs along bed, especially the variations caused by changes in friction velocity and the wind‐blowing duration. A particle size of 158 μm (d ) was used to create aeolian ripples in a wind tunnel under four friction velocities (u *) with different wind duration times (t ). Samples were collected from the surfaces of ripple crests and troughs, respectively, at seven sites, and particle sizes were measured using a Malvern Mastersizer 2000. The main results were: (i) The particle size distributions of sand in troughs are unimodal with slight variations of particle size parameters, including mean particle size, standard deviation, skewness and kurtosis, etc., under different conditions, while these particle size parameters of sand on crests change with friction velocity and deflation time. Moreover, some of the particle distribution curves for the sand on crests do not follow typical unimodal curves. (ii) With increasing friction velocity or deflation duration, the sand on the crests shows a coarsening process relative to those on the bed surface. The particle size of sand on crests at a 1 m bed increases linearly with friction velocity (d = 344·27 + 34·54 u *) at a given wind‐blowing duration. The particle sizes of sand on crests at 1 m, 2 m and 4 m beds increase with a power‐law relationship (d = a + t b, where a and b are fitting parameters) with deflation time at a given friction velocity. (iii) The probability cumulative curves of sand showed a three‐section pattern in troughs and on most of the crests but a four‐section pattern at crest locations due to increased influence by friction velocity and deflation time. The proportions of the sediment moved by suspension, saltation and creep in the three‐section pattern were within the ranges of 0·2% to 2·0%, 97·0% to 98·9%, and 0·8% to 3·0%, respectively. For the four‐section pattern, suspension accounted for 0·3% and 3·0%, and the proportion of creep increased with friction velocity and deflation time, while saltation decreased accordingly. Although these results require additional validation, they help to advance current understanding of the grain‐size characteristics of aeolian ripples. 相似文献
5.
Preserved in Quebrada de las Lajas, near San Juan, Argentina, is an ancient subaqueous proglacial sedimentary succession that includes a small‐scale (ca 50 m thick and ca 200 m wide) channel–levée system with excellent exposure of the channel axis and levée sediments. Coeval deposition of both the channel axis and the levées can be demonstrated clearly by lateral correlation of individual beds. The channel axis consists predominantly of a disorganized, pebble to boulder conglomerate with a poorly sorted matrix. The channel axis varies from 10 to 20 m wide and has a total amalgamated thickness of around 50 m. Beds fine gradationally away from the cobble–boulder conglomerates of the channel axis within a few metres, transitioning to well‐organized pebble to cobble conglomerates and sandstones of the channel margin. Within 60 m outboard of the channel axis in both directions, perpendicular to the trend of the channel axis, the mean grain size of the beds in the levées is silt to fine‐grained sand. Deposits in this channel–levée system are the product of both debris flows (channel axis) and co‐genetic turbidity currents (channel margins and levées). Bed thicknesses in the levées increase for up to 10 to 25 m away from the channel axis, beyond which bed thicknesses decrease with increasing distance. The positions of the bed thickness maxima define the levée crests, and the thinning beds constitute the outer levée slopes. From these relationships it is clear that the levée crest migrated both away from and toward the channel axis, and varied in height above the channel axis from 4 to 5 m (undecompacted), whereas the height of the levée crest relative to the distal levée varied from 4·5 to 10 m, indicating that the channel was at times super‐elevated relative to the distal levée. Bed thickness decay on the outside of the levée crest can be described quite well with a power‐law function (R2 = 0·85), whereas the thickness decay from the levée crest toward the channel axis follows a linear function (R2 = 0·78). Grain‐size changes are quite predictable from the channel margin outward, and follow logarithmic (R2 = 0·77) or power‐law (R2 = 0·72) decay curves, either of which fit the data quite well. This study demonstrates that, in at least this case: (i) levée thickness trends can be directly related to channel‐flow processes; (ii) individual bed thickness changes may control overall levée geometry; and (iii) levée and channel deposits can be coeval. 相似文献
6.
Rico Stecher 《Swiss Journal of Geoscience》2008,101(1):185-201
A new basal non-pterodactyloid pterosaur, Raeticodactylus filisurensis gen. et sp. nov., is reported. It has been discovered in shallow marine sediments from the Upper Triassic of the lowest Kössen beds (late Norian/early Rhaetian boundary) in the central Austroalpine of Canton Grisons (Switzerland). The disarticulated specimen is comprised of an almost complete skull and a partial postcranial skeleton. A high and thin bony, sagittal cranial crest characterizes the anterodorsal region of the skull. The large mandible, with an additional keel-like expansion at the front, partly matches the enlarged sagittal cranial crest. A direct and close relationship to Austriadactylus cristatus, the only known Triassic pterosaur with a bony cranial crest so far, cannot be established. The teeth of the premaxilla are monocuspid and exhibit very strongly bowed enamel wrinkles on the lingual side whereas the enamel is smooth on the labial side. These monocuspid teeth are large and fang-like. The numerous smaller teeth of the maxilla show three, four and five cusps. These are very similar to the teeth of the Triassic pterosaur Eudimorphodon ranzii. The humerus shows a thinner construction than that seen in other Triassic pterosaurs. The femur is quite unusual with a caput femoris perpendicular to the shaft. The bones of the extremities are almost twice as long as the ones from the largest Triassic specimen E. ranzii (MCSNB 2888). The newly described pterosaur is an adult, with a wingspan of approximately 135 cm. A morphofunctional analysis suggests that R. filisurensis was a highly specialized piscivore and possibly a skim-feeder. 相似文献
7.
8.
A common assumption in the geological analysis of modern reefs is that coral community zonation seen on the surface should also be found in cores from the reef interior. Such assumptions not only underestimate the impact of tropical storms on reef facies development, but have been difficult to test because of restrictions imposed by narrow‐diameter cores and poor recovery. That assumption is tested here using large‐diameter cores recovered from a range of common zones across three Campeche Bank reefs. It is found that cores from the reef‐front, crest, flat and rubble‐cay zones are similar in texture and coral composition, making it impossible to recognize coral assemblages that reflect the surface zonation. Taphonomic signatures imparted by variations in encrustation, bioerosion and cementation, however, produce distinct facies and delineate a clear depth zonation. Cores from the reef‐front zone (2–10 m depth) are characterized by sections of Acropora palmata cobble gravel interspersed with sections of in‐place (but truncated) A. palmata stumps. Upper surfaces of truncated colonies are intensely bioeroded by traces of Entobia isp. and Gastrochaenolites isp. and encrusted by mm‐thick crustose corallines before colony regeneration and, therefore, indicate punctuated growth resulting from a hurricane‐induced cycle of destruction and regeneration. Cores from the reef crest/flat (0–2 m depth) are also characterized by sections of hurricane‐derived A. palmata cobble‐gravels as well as in‐place A. palmata colonies. In contrast to the reef front, however, these cobble gravels are encrusted by cm‐thick crusts of intergrown coralline algae, low‐relief Homotrema and vermetids, bored by traces of Entobia isp. and Trypanites isp. and coated by a dense, peloidal, micrite cement. Cores from the inter‐ to supratidal rubble‐cay zone (+0–5 m) are only composed of A. palmata cobble gravels and, although clasts show evidence of subtidal encrustation and bioerosion, these always represent processes that occurred before deposition on the cay. Instead, these gravels are distinguished on the basis of their limited bioerosion and marine cements, which exhibit fabrics formed in the intertidal zone. These results confirm that hurricanes have a major influence on facies development in Campeche Bank reefs. Instead of reflecting the surface coral zonation, each facies records a distinctive, depth‐related set of taphonomic processes, which reflect colonization, alteration and stabilization following the production of new substrates by hurricanes. 相似文献
9.
The spaceborne laser ranging (or lasering) system provides a method of precise positioning of a large number of points on the earth's surface in a short period of time. That is, a measure of the relative location of geodetic markers from a space platform can maintain horizontal and vertical control to 2–5 cm. At this level of control, small earth surface crustal motions should be detectable. Development of a model for the strain field can be constructed. Furthermore, the spaceborne lasering system can survey an area in a very short period of time (1–2 weeks) and resurvey the area as required.System design parameters are now being established by NASA for a possible test flight aboard the Shuttle in 1982. These include design specifications of economical corner cubes for ground retroreflectors, coupled with the evolution of engineering model to flight model development. If the experiment of the Shuttle proves successful, it is hoped to put the laser in a free flight satellite. This paper presents the results of a simulated analysis for this contingency.The system is conceived as an orbiting ranging device with a ground base grid of reflectors or transponders (spacing 1.0–30 km), which are projected to be of low cost (maintenance-free and unattended) and which will permit the saturation of a local area to obtain data useful in monitoring crustal movements. The test network includes 75 stations with roughly half of them situated on either side of the San Andreas fault. Critical study comparatively evaluates various observational schemes and statistically analyzes crustal motion recovery.The study considers laser radar as the main ranging system, pending final selection from many possible candidates. The satellite orbit is inclined at 110° and slightly eccentric (e = 0.04) with orbital altitudes varying from 370 to 930 km. 相似文献
10.
A new species of tapejarid pterosaur, Huaxiapterus coroUatus sp. nov. is erected on the basis of a nearly complete skull and postcranial skeleton from the Lower Cretaceous Jiufotang Formation of Liaoning Province, China. Huaxiapterus coroUatus sp. nov. is characterized by a hatchet-shaped rectangular process on the premaxilla, whose short axis is perpendicular to the anterior margin of the premaxillae. Except for this process, other characters of the skull such as the breadth of the snout between the anterior margin of the nasoantorbital fenestra and the anterior margin of the premaxilla are similar to that of Huaxiapterus jii. Huaxiapterus and a second Chinese tapejarid, Sinopterus, share several unique cranial characters in common with Tapejara and these three genera appear to be more closely related to each other than to other azhdarchoids. The Chinese tapejarids （Sinopterus and Huaxiapterus） have relatively elongate skulls and weakly developed cranial crests and seem to be less derived than Tapejara, with its shorter, deeper skull and large cranial crest. Tupuxuarids （Tupuxuara and Thalassodromeus） have often been associated with tapejarids in the family Tapejaridae, but this relationship is controversial because some phylogenetic analyses have supported the pairing of tupuxuarids with Azhdarchidae. We propose that Tapejaridae be restricted to Tapejara, Sinopterus and Huaxiapterus. 相似文献
11.
Large symmetric and asymmetric dunes occur in the Fraser River, Canada. Symmetric dunes have stoss and lee sides of similar length, stoss and lee slope angles <8°, and rounded crests. Asymmetric dunes have superimposed small dunes on stoss sides, sharp crests, stoss sides longer than lee sides, stoss side slopes <3° and straight lee side slopes up to 19°. There is no evidence for lee side flow separation, although intermittent separated flow is possible, especially over asymmetric dunes. Dune symmetry and crest rounding of symmetric dunes are associated with high sediment transport rates. High near-bed velocity and bed load transport near dune crests result in crest rounding. Long, low-angle lee sides are produced by deposition of suspended sediment in dune troughs. Asymmetric dunes appear to be transitional features between large symmetric dunes and smaller dunes adjusted to lower flow velocity and sediment transport conditions. Small dunes on stoss sides reduce near-bed flow velocity and bed load transport, causing a sharper dune crest. Reduced deposition of suspended sediment in troughs results in a short, steep lee slope. Dunes in the Fraser River fall into upper plane bed or antidune stability fields on flume-based bedform phase diagrams. These diagrams are probably not applicable to large dunes in deep natural flows and care must be taken in modelling procedures that use phase diagram relations to predict bed configuration in such flows. 相似文献
12.
He Qing Xing Lid Zhang Jianping Martin G. Lockley Hendrik Klein W. Scott Persons IV Qi Liqi Jia Chengkai 《《地质学报》英文版》2013,87(6):1477-1485
A pterosaur-bird track assemblage from a sandstone-siltstone-mudstone sequence of the Lower Cretaceous Tugulu Group of Xinjiang comprises the first pterosaur track record from this province and the largest specimen thus far known from China.The pterosaur tracks are assigned to the ichnogenus Pteraichnus based on the triangular overall-shape,the four elongate digit traces and the robust manual digit trace Ⅲ.Supposed trackmakers were dsungaripterid pterodactyloids whose skeletal remains are well known from the Tugulu Group.The bird tracks that occur on the same surface,are those of typical shorebirds,known from different other localities in southeast Asia.The congruence with Koreanaornis dodsoni described from the same stratigraphic level justifies an assignment to this ichnospecies.This is a further evidence of the co-occurrence of pterosaurs and birds in a typical iakeshore environment with possible seasonal alteration of water supply and aerial exposure indicated by wave ripples,mudcracks and repeated cycles of coarse to fine sediment.Pterosaurs and birds frequented the shoreline and may have fed also on the numerous invertebrates such as the Scoyenia tracemaker that left abundant burrows. 相似文献
13.
A new Early Cretaceous enantiornithine bird from Liaoning Province of northeastern China, Shengjingornis yangi, gen. et sp. nov., is reported. This new bird possesses the following unique combination of features: a long rostrum, with some teeth in the front; short nasal; slender jugal; Y-shaped furcula, with expanded distal end of the hypocleidum; cake-like sternum, with a low and caudally distributed keel; strut-like and caudally concave coracoid. The derived features of the scapula and the wings suggest a powerful flapping flight capability. 相似文献
14.
K. Grohs A. Marton 《Fragblast: International Journal for Blasting and Fragmentation》2002,6(3):345-358
Concerns with crest losses have seen changes to a number of design and operating parameters to retain the integrity of the wall and the berms of the Kidston Gold Mines' Eldridge Pit. Until trials began in 1999 most final wall designs utilised large diameter blastholes up to the presplit row to achieve the wall angle. The berm crests were being lost, wall support requirements were increasing and affecting mining schedules and several fault areas were putting pit access at risk. Standard designs had been determined during the early mining years and while periodic modifications had been made there was a need for major blast pattern revision. This paper traces the development of wall control blasting programs over the years, relating designs to the geology and the evidence in the walls with the theories of the day and includes the recent trials that were conducted in what is a most unforgiving geology. Trials and improvements to ensure the walls were safe were conducted even as the mine neared its economic life. Instrumented monitoring of trials blasts has greatly increased the understanding of the damage criteria and enabled rapid revision of designs. Recent changes included reduction in presplit energy, charge redistribution and use of smaller blastholes for the trim patterns. Determination of a minimum proximity-to-final wall limit for production blastholes, establishment of the correct standoff to berm crests and walls and selective use of presplitting techniques for protecting crests have resulted in cost effectiveness, improved bench crest retention and an overall reduction in visible wall damage. 相似文献
15.
Influence of a low-viscosity layer between rigid inclusion and viscous matrix on inclusion rotation and matrix flow: A numerical study 总被引：1，自引：0，他引：1
We have used 2-D finite element modelling to investigate the influence of a permanent low-viscosity layer between matrix and inclusion on matrix flow and inclusion rotation under viscous simple shear flow. Rigid inclusions of different shape (circle, square, ellipse, lozenge, rectangle and skewed rectangles) and aspect ratio (R) were used. The calculated matrix flow pattern is neither bow tie nor eye-shaped. It is a new flow pattern that we call cat eyes-shaped, which is characterized by: (i) straight streamlines that slightly bend inwards at the inclusion's crests; (ii) elongate eye-shaped streamlines on each side of the inclusion; (iii) stagnation points in the centre of the eyes; (iv) absence of closed streamlines surrounding the inclusion; (v) changes in flow configuration with inclusion orientation; the lines of flow reversal bend and tilt, closed streamline circuits may disappear, and streamlines may bend outwards at the inclusion's crests.Concerning inclusion rotation, the numerical results show that: (i) a low-viscosity layer (LVL) makes inclusions with R = 1 rotate synthetically, but the rotation rate depends upon shape (circle or square) and orientation. Therefore, shape matters in the slipping mode. (ii) All studied shapes with R > 1 rotate antithetically when starting with the greatest principal axis (e1) parallel to the shear direction ( = 0°); (iii) rotation is limited because there is a stable equilibrium orientation (se) for all studied shapes with R > 1. (iii) There is also an unstable equilibrium orientation (ue), and both se and ue depend upon inclusion's R and shape.The present numerical results closely agree with previous results of analogue experiments with a permanent low viscosity interface. Only minor deviations related with small shape differences were detected. 相似文献
16.
Rock nailing of the surface instability test specimen is considered as a means to reinforce the rock and increase its free surface strength (FSS). This technique is modeled using Cox's original shear‐lag method. In the continuum sense, nail reinforcement is modeled as a body force that acts as a confinement. Results are presented for a single nail in a surface instability test specimen and for a nail‐reinforced test specimen with a given nail density. The results show that nail length and the nail–rock contact modulus are important parameters. The effect of nail reinforcement increases with the second power of nail length. Rock dilation is also important since the action of the nails is mobilized from the difference in displacement between the rock and the nail. The results show the potential for a significant increase in the FSS of the rock. Copyright © 2011 John Wiley & Sons, Ltd. 相似文献
17.
The holotype of ‘Procheneosaurus’ convincens, a juvenile lambeosaurine, is the most complete hadrosaurid known from Kazakhstan. North American species of Procheneosaurus are considered juveniles of Corythosaurus, Hypacrosaurus, and Lambeosaurus, rendering the generic name unusable. A replacement name, Kazaklambia convincens comb. nov., is herein proposed as this specimen is morphologically distinct from other Eurasian taxa and known juvenile lambeosaurines at a similar ontogenetic stage in having a prefrontal process of the postorbital with a dorsal thickening forming a dome lateral to the frontal dome, doming of the nasal anterodorsal to the orbit, and a frontal length/width ratio <1. The juvenile status of Kazaklambia makes phylogenetic placement difficult; however, morphometric and morphological information (particularly in relation to the hollow cranial crest and the length of the frontal) suggest a close affiliation with the basal lambeosaurines Amurosaurus and Tsintaosaurus, and support the hypothesis for an Asian origin for Lambeosaurinae. 相似文献
18.
A New Species of Gobiconodon (Mammalia) from Western Liaoning,China and its Implication for the Dental Formula of Gobiconodon 总被引：1，自引：0，他引：1
A new species of Gobiconodon from the Early Cretaceous in the Lujiatun locality of western Liaoning is erected based on an almost complete skull and lower jaw. It has a flatten skull roof, the lambdoidal crest is strongly curved forward, and the sagittal crest is short and low. There is a protuberance near the anterior base of the zygoma. The preservation of the upper teeth is very rare in all known Gobiconodon, and this provides important information for the study on the formula of Gobiconodon. The new species is the fifth primitive mammal unearthed from the Lujiatun locality, and is of great value for the study of the geological age of the stratigraphy at Lujiatun by primitive mammal material. 相似文献
19.
Natural levées of the Columbia River near Golden, British Columbia, were investigated to identify the mechanisms that control levée development and morphology. Topographic profiles of 12 levée pairs were surveyed, and measurements of water-surface elevation, flow velocity, flow direction and turbidity were obtained during an average magnitude flood (1·2 years recurrence interval). Sedimentation rates and grain-size distributions were measured from sediment traps placed along levée-to-floodbasin transects. Results show that water and sediment exchange between the channel and floodbasin was mainly by advection. During flooding, local floodbasins behave more as efficient water pathways than water storage features, resulting in down-valley floodbasin flows capable of limiting basinward growth of levées. Levée shape results primarily from two independent factors: (1) maximum channel water stage, which limits levée height; and (2) floodbasin hydraulics, which control width. In the Columbia River, the competence of floodbasin flows results in relatively narrow and steep levées. Natural levées grow under two general conditions of deposition as governed by flood-stage elevation relative to levée-crest elevation: front loading and back loading. During large floods when crests are inundated, front loading preferentially aggrades the proximal portions of levées with sediment directly from the channel, thus increasing levée slope. During average or below-average floods when many levée crests are not overtopped, back loading preferentially aggrades the distal levée areas and floodbasin floor, reducing levée slope. In the study area, a balance between front and back loading sustains these narrow and steep levée shapes for long periods, reflecting an equilibrium between hydraulic regime, floodplain morphology and deposition. 相似文献
20.
《Geomechanics and Geoengineering》2013,8(3):191-197
A translational failure of a highway embankment constructed on sloping ground may occur either in the mode of overall instability or in the mode of local instability. The stability analysis of the first mode is based on the assumption that the whole cross-section of the embankment will slide along the inclined base surface, whilst the second mode is based on the assumption of Rankine's active state of stress. In this paper the determination of the prevalent mode of failure – overall or local – is provided via a chart derived from force polygon analysis, with the dimensionless parameter, c′/γH, and the effective friction angle, φ′, as its axes. Furthermore, the determination of the most probable failure plane in the cross-section of the embankment is attempted and additionally the role of the cohesion in the stability is discussed. Finally, an estimation of the amplitude of failure at the road surface in the case of local instability is given. A confirmation of the aforementioned was achieved through case studies of highway embankments that have failed as a consequence of water infiltration and the development of high pore water pressures. A comparison between the local and the respective overall instability safety factor is given. 相似文献