首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 109 毫秒
1.
杨房沟坝址高边坡工程地质特征及稳定性评价   总被引:1,自引:0,他引:1  
为掌握杨房沟坝址高边坡稳定性情况及治理措施,采用现场调查及室内分析计算方法对河谷高边坡岩体工程地质特征及稳定性展开了全面研究。得出以下结论:高边坡花岗闪长岩可划分为块状、次块状及镶嵌结构等类型;边坡岩体质量从坡面向内分别为Ⅲ2、Ⅲ1、Ⅱ类,Ⅳ类岩体很少;天然边坡存在松动张裂、楔形体滑动及崩塌等破坏形式,控制性结构面为顺河向卸荷裂隙;从河谷演化角度通过数值模拟方法分析现今边坡应力分布、塑性区范围、变形规律及总体稳定性,认为坝址区天然边坡整体稳定性较好,降雨或地震等不利条件边坡可能存在浅部块体滑移失稳。  相似文献   

2.
王旭  晏鄂川  余子华 《岩土力学》2006,27(4):601-604
分析结构面在岩体中的分布和组合特征是研究岩体稳定性的前提。根据结构面网络随机模拟方法,通过对岩体表面结构面的测量,可以建立岩体结构面空间分布的概率统计模型,从而确立了岩体结构面的网络结构模型。在此基础上分析了局部临空块体的空间几何形态,指出了块体的可能破坏形式,从宏观角度对块体系统整体稳定性进行了预测。  相似文献   

3.
边坡稳定性问题是川藏线工程建设面临的重要问题。野外调查发现基岩边坡失稳一般表现为块体塌落或滑动。基于岩体结构控制理论,作者以川藏线西藏境内宿瓦卡附近的人工高边坡为例,进行了块体边坡稳定性分析。对比现有理论方法的优缺点,采用坐标投影作图法及其计算机化程序CPH。坐标投影作图法是一种以正投影为基础,以分析岩体结构面的几何关系及由其切割出来的块体的稳定性为目的的图解方法。根据现场量测取得的数据,采用CPH程序确定了块体边坡的结构面方程,从而求出各结构面产状。在此基础上建立水平切面图,并求得各块体顶点坐标,计算出块体的表面积及体积。根据极限平衡理论,运用CPH程序进行块体稳定性分析,并求出块体的稳定性系数。通过分析可知,坐标投影作图法及其计算机化的CPH程序在块体边坡稳定性分析中有着很好的应用效果。  相似文献   

4.
汤屯高速公路存在大量变质砂岩组成的高边坡,岩体质量一般较好,但结构面发育,组合形成大量潜在失稳块体,这些块体的稳定性状况直接影响边坡安全.本文选取一个典型边坡,通过对边坡结构面详细地质素描,查明构成可能失稳块体的边界条件,并利用块体理论对可能失稳的块体在各种工况下的稳定性进行计算,并结合块体工程特性,对边坡的稳定性进行系统评价.该研究成果对该边坡的支护优化设计提供了基础资料,同时对同类型的边坡设计具有一定的指导意义.  相似文献   

5.
杜朋召  刘建  韩志强  徐华 《岩土力学》2013,34(Z1):393-405
用数值方法对岩质高边坡进行稳定性分析时,描述岩体结构对的精细程度会影响分析结果,但常见的有限单元法程序仍难以对复杂节理岩体进行精细建模。为解决这一问题,将结构面网络模拟与离散单元法相结合,在UDEC软件中,利用FISH语言编写网络模拟程序,依据结构面统计资料和结构面分级,实现对复杂岩体结构的精细描述。以某大型水电工程边坡为例,在对岩体结构进行精细描述的基础上,采用离散元强度折减法对边坡进行稳定性分析。通过与极限平衡法和一般离散元结果的对比,表明基于复杂岩体结构精细描述确定的边坡潜在滑动面和安全系数是合理的,为复杂岩质边坡破坏模式和稳定性的分析提供了新的途径。  相似文献   

6.
摘要:岩质高边坡整体稳定性主要受软弱结构面及其组合控制,在组合有利的情况下,边坡主要发生浅表层块体失稳,开挖时的爆破振动作用是影响浅表层块体稳定的重要因素。本文以大渡河中游某岩质块状结构高边坡为例研究浅表层块体的稳定性,在总结浅表层块体失稳特征的基础上,实测爆破振动曲线,进行块体稳定性评价。研究结果表明,开挖后已失稳浅表层块体大多小于10m3,80%受软弱结构面控制,70%集中在马道下缘;实测的浅表层块体爆破振动加速度曲线显示,与邻近围岩相比,浅表层块体振动持续时间长,频率低,峰值小;等效静力法评价结果较爆破参数推算法更适用于临界失稳浅表层块体的稳定性评价。  相似文献   

7.
块体理论是适用于分析节理发育破碎刚性岩体稳定性的有效方法。锦屏二级水电站皮带机隧洞岩体不连续面发育,隧洞开挖面是否产生可动块体影响着皮带机隧洞的稳定性。在对皮带机隧洞详细的地质调查和研究基础上,运用块体理论赤平解析法分析皮带机隧洞的稳定性,对各不连续面和开挖面构成的可动块体滑动形式进行判断,得出了块体的失稳形式以单面滑动为主,双面滑动和垂直掉块相对较少的结论;同时得出皮带机隧洞各部分可动块体分布的直观统计结果,即皮带机隧洞左侧墙,左、右顶拱失稳块体较多,右侧墙较少。  相似文献   

8.
小湾电站高边坡系统锚固与排水的优化设计方法   总被引:1,自引:0,他引:1  
据小湾电站地下厂房进水口开挖高边坡的岩体结构与工程地质特征,采用基于结构面网络模拟的随机楔体稳定分析方法对边坡的稳定性进行了三维分析。进一步运用风险分析理论对边坡系统锚杆与预应力锚索的布置进行了优化设计,最后运用结构面网络模拟理论对排水方案进行了优化设计。  相似文献   

9.
水电站料场高边坡具有高度大、坡度陡、卸荷速度快等特点,因多按临时边坡进行设计,故施工期变形破坏事例频发。基于这一现状,依托瀑布沟水电站两岩质料场边坡,通过两年多跟踪施工过程的支护设计工作,总结出一套操作性强的料场高边坡稳定性及支护设计方法。针对料场边坡存在的受软弱结构面控制的边坡整体稳定性、浅表层块体稳定性、碎裂岩体稳定性三种工程地质问题,在跟踪施工过程开展岩体结构调查的基础上,按照先整体后局部的稳定性评价思路,开展高边坡稳定性评价。施工期动态支护设计按照保证整体稳定,控制局部变形,顾全潜在失稳区域的理念,通过定性评价确定不稳定区域并优先设计提交施工;针对施工中最易出现的块体变形和碎裂岩体变形,建立了合理的支护设计原则和严格的施工规定;对稳定性差、施工风险高、支护造价大的潜在不稳定区域,应及时地调整开挖方案,减少工程造价。实践表明,这套方法保证了料场高边坡的快速施工安全,减少了工程投资。  相似文献   

10.
白鹤滩水电站左岸为强卸荷岩体三维复杂块体系统高边坡,采用三维地质力学模型试验,进行了边坡变形特性、失稳破坏过程、破坏机制、边坡稳定性及加固处理效果研究。模型试验表明,边坡失稳模式为块体滑动破坏,破坏形态表现为底滑面的剪切破坏和后缘结构面的拉裂破坏以及块体沿底滑面和侧滑面的滑动。边坡破坏过程为模型结构面初裂、结构面组合块体边界贯通、最终至边坡整体失稳3个阶段。采用地质力学模型试验综合法获得了左岸块体系统边坡整体稳定安全系数,典型块体稳定安全系数与三维刚体法及块体单元法(BEM)计算成果对比基本一致,模型试验综合法安全系数相对较大。同时,针对层内错动带LS_(337)界面部位相对变位监测表明,深层混凝土置换洞加固有效地控制了底滑面的滑动变形,提高了相关结构面组合块体的稳定性,边坡加固效果较为明显。研究成果对白鹤滩工程左岸强卸荷区三维复杂块体系统边坡及类似工程边坡稳定性及加固处理具有重要的指导意义。  相似文献   

11.
边坡岩体块体稳定性分析系统的开发与研究   总被引:18,自引:3,他引:15  
提出了复杂形态块体几何建模的切割法, 在此基础上, 对石根华等人提出的块体理论作了改进和完善。并基于Windows操作平台, 开发了一套实用方便、实用的边坡岩体块体稳定性分析系统。经大量的实例 (例如三峡工程船闸高边坡 )检验结果表明, 该系统可以作为对边坡中复杂形状块体稳定性进行现场快速评价的实用工具。  相似文献   

12.
The granitic rock mass that exists in the shiplock region of the Three Gorges dam site contains a number of major discontinuities and about four sets of minor discontinuities. One hundred and thirty three major discontinuities have been mapped around the shiplock covering an area of 1740×600 m. These major discontinuities were used to perform rock slope kinematic and block theory analyses. Kinematic analyses were performed under the following two cases: (1) assuming all the mapped discontinuities cross the shiplock; (2) using only discontinuities that actually intersect the shiplock. Under case (1) and case (2) the shiplock faces in the proposed permanent shiplock region in fresh rock were found to be stable up to a cut slope of about 45° and 58°, respectively. Block theory was applied to identify different block types that exist on the shiplock faces and to estimate the maximum safe slope angles on the shiplock faces. The orientations of the major discontinuities that actually intersect the shiplocks were considered in this analysis. The total length of the shiplock (1750 m) was divided into 50 m segments. From the stereo-plots, the key blocks (Type I) and/or potential key blocks (Type II) were found for only five segments of the shiplock slopes. It was found that the dip of the cut slope should be less than about 60° to avoid creation of a key block on the proposed shiplock slopes. However, it is important to keep in mind that these conclusions are based on the kinematic analyses performed using only the major discontinuities. Further kinematic as well as kinetic analyses are recommended incorporating minor discontinuities, water forces, earthquake forces etc. before making the final conclusions about the maximum safe slope angle for the shiplock region.  相似文献   

13.
Block theory has been widely applied to stability analysis of rock engineering due to its clear concept and elegant geometrical theory. For a general block with multiple discontinuity planes, it is assumed that contact is only maintained on a single plane (single-plane sliding) or two intersecting planes (double-plane sliding) in block theory analysis. Since the normal forces and shear resistances acting on the other discontinuity planes are omitted, it can cause unreasonable estimations of block failure modes and incorrect calculation of factors of safety. In this study, a new method is presented that permits to consider the contribution of the normal forces and shear resistances acting on each discontinuity plane to the block stability. The proposed method meets all of the force-equilibrium and moment-equilibrium conditions and provides a rigorous solution for stability of general blocks with any number of faces and any shape. Some typical polyhedral blocks in rock slopes are analyzed using block theory and the proposed method. The results indicate that the traditional block theory may give a misleading conclusion for the predictions of stability and sliding direction of rock blocks when contact occurs on more than two discontinuity planes.  相似文献   

14.
水下岩质边坡稳定性的模型试验研究   总被引:1,自引:0,他引:1  
姜海西  沈明荣  程石  肖汝诚 《岩土力学》2009,30(7):1993-1999
随着三峡水利建设工程的进行,许多原本位于水面以上且已趋于稳定的人工或自然岩质边坡将被淹没,导致边坡稳定性降低,而水的压力、冲击、渗流和侵蚀等综合作用,给下岩质边坡的稳定性带来大量的不确定性。基于已有的水下土质边坡稳定性试验和水下岩质边坡有限元分析,进行水下岩质边坡模型试验研究,探讨在水位升降水过程中和波浪作用下水下岩质边坡的稳定性和破坏机制。将结构面为30°和50°的两种岩质边坡模型布置在人工水槽中,采用波流系统进行水位升降水波浪冲击试验,量测岩质边坡的应力变化。通过分析边坡各测点应力变化,得出了一些有意义的结论:(1)把边坡前部岩体划分成3个区域,每个区域内应力变化规律相同;(2)水下岩质边坡坡脚处应力集中最大,破坏始于坡脚,并由此产生的塑性区沿结构面逐渐同坡顶发展,这与一般边坡从坡顶逐渐向下发展的开裂破坏形式完全不同;(3)波浪对水下岩质边坡结构面的影响,将随其倾角的变小而减弱。  相似文献   

15.
目前运动单元法的研究主要集中于土质边坡,未涉及到岩质边坡稳定性分析问题;而岩体中孕育有不同特性的结构面,控制着岩质边坡的力学行为。为求解结构面控制作用下岩质边坡“结构面滑移-岩桥剪断”复合型破坏问题,研究了塑性滑移区节点在岩桥内和结构面上的运动约束条件,推导了含结构面的运动单元计算公式,提出了改进运动单元法。通过经典算例的对比分析,验证了改进运动单元法计算结果的准确性。研究结果表明:岩桥位置、结构面贯通度和结构面倾角是控制岩质边坡力学行为的3个主要影响因素。岩桥越接近坡顶,改进运动单元法所得安全系数越大,而Jennings法无法反映岩桥位置的影响效应。高贯通度的结构面导致岩质边坡发生“结构面滑移-岩桥剪断”复合型破坏模式,安全系数较小;而低贯通度的结构面导致完整岩石发生破坏,安全系数较大。水平或陡倾角结构面导致滑裂面穿切结构面,安全系数较大;而对于其它倾角情况下的结构面,岩质边坡发生“结构面滑移-岩桥剪断”复合型破坏模式,安全系数较小。实例应用结果说明该方法可以有效评价岩质边坡的稳定状态,可在类似工程中应用推广。  相似文献   

16.
Linear infrastructure networks like roads play a vital role in the socio-economic development of hill towns centered on tourism. Stability of the slopes along the hill roads are therefore a major concern and slope failures lead to disruption of traffic and loss of property/life or both. This study analyses the stability of cut-slopes along the Kodaikkanal – Palani hill road in the Western Ghats, India using rock mass classification systems like rock mass rating (RMR), slope mass rating (SMR) and continuous slope mass rating (CSMR). These geomechanical classifications provide a preliminary assessment of rock quality based on rock strength, discontinuity properties, hydrogeological condition of the slopes and slope stability based on the inherent rock strength parameters, discontinuity orientation and method of excavation. The results showed that both rock quality and discontinuity orientation contribute to type of failure in rock slopes with RMR > 40. SMR results are conservative while CSMR classification is matches more closely to the failures obtained from the field survey. CSMR classification represents continuous slope stability conditions and hence are more suitable for development of spatial database. Cutting of roads, thereby, steepening slopes has a definite influence on the stability of slopes.  相似文献   

17.
Summary  We study the effects of discontinuity network parameters on the formation of removable wedges in rock slopes. Discontinuities are simulated using the Poisson disk model, and removable wedges are identified using block theory. The formation of removable wedges of different sizes is assumed to follow a Poisson process. Poisson regression and Monte Carlo simulation are then used to identify statistically relevant parameters of the model, and to study the effects that variations in their values have on formation of removable blocks. The sensitivity of the results as a function of the mean orientations of the discontinuity sets forming the blocks is also studied by means of a parametric study. The volumetric intensity of discontinuities in the rock mass is found to have a significant impact on the computed estimates of removable block formation. As predicted by theory, our results indicate that, everything else being equal, the expected rate of formation of removable wedges is proportional to the square of the intensity measure. Estimates are also sensitive to changes in discontinuity size, especially in cases in which discontinuities are smaller than one to two times the height of the slope. The interaction between the mean size of discontinuities and the coefficient of variation of discontinuity sizes is found to be significant as well. Finally, results of our sensitivity analysis suggest that the orientation of discontinuity sets significantly affects the rate of formation of removable blocks in rock slopes. Author’s address: Dr. Rafael Jimenez-Rodriguez, ETS Ing. de Caminos, Canales y Puertos. Universidad Politecnica de Madrid, Spain  相似文献   

18.
高大水  吴海斌  王莉 《岩土力学》2005,26(Z2):126-130
三峡双线五级船闸高边坡工程共安装了1 000 kN预应力锚索229束,3 000 kN预应力锚索3 975束,400 kN高强锚杆9.7万根,加固岩石边坡楔形块体1 054个,完成的边坡锚固量和岩石块体支护量均属世界之最。由于预应力锚索在船闸高边坡中起着至关重要的作用,在船闸预应力锚索设计和施工过程中对锚索的防腐措施进行了系统研究,并收集国内外锚索耐久性研究最新成果,结合船闸锚索的地下环境对锚索耐久性进行了全面研究。研究成果显示,三峡船闸高边坡预应力锚索防腐措施可靠,耐久性可以保证。  相似文献   

19.
永久船闸边坡稳定性声发射监测   总被引:2,自引:3,他引:2  
李金河  玉国进 《岩土力学》2001,22(4):478-480
岩体声发射检测技术是岩质工程结构受力破坏的实时动态检测方法,声发射信号参数与岩质工程结构受力产生破裂损伤或破坏紧密关联,具有 一个测点监控范围大,实时提供信息等突出优点。永久船闸边坡稳定性声发射监测实现了对边坡岩体全天候自动化连续监测与数据处理。根据声发射数据的变化及“突变”,对边坡岩体稳定性及其发展趋势进行评价,并为船闸边坡岩体受力损伤开裂部位的加固,及时地提供了有效依据。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号