首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Abstract. Ages for thirty adularia samples collected from various veins were in the Hishikari gold deposit determined by 40Ar/39Ar dating to constrain the timing of adularia‐quartz vein formation and to determine the temporal change in temperature of hydrothermal fluid. Plateau ages were obtained from all adularia samples, and significant excess 40Ar is not recognized from inverse isochrones. The duration of mineralization within individual veins was determined by adularia ages from the early and late stages of mineralization within the same vein. The durations of mineralization in the Daisen‐1, Daisen‐3, Hosen‐2 and Keisen‐3 veins in the Honko‐Sanjin zone were 7,000, 140,000, 160,000 and 170,000 years, respectively. The durations of mineralization in the Seisen‐2 and Yusen‐1–2 veins in the Yamada zones were 360,000 and 320,000 years, respectively. Mineralization lasted for a relatively longer period in individual veins at the Yamada zone. Mineralization ages from the Honko‐Sanjin zone range from 1.04 to 0.75 Ma, and most mineralization ages are concentrated in a short period from 1.01 to 0.88 Ma. In contrast, mineralization ages for the Yamada zone range from 1.21 to 0.64 Ma. These results indicate that fracturing and subsequent vein formation lasted for a longer period in the Yamada zone (about 570,000 years) compared with those events in the Honko‐Sanjin zone (about 290,000 years). The homogenization temperatures of liquid‐rich fluid inclusions in columnar adularia used for age determination were determined to be 223°C on average, and most of these temperatures range from 180 to 258d?C. No significant temporal change in homogenization temperature is recognized in this study. However, adularia in the Keisen veins indicated higher homogenization temperatures compared with elsewhere in the deposit, suggesting that the principal ascent of mineralizing hydrothermal fluid was via the Keisen veins.  相似文献   

2.
The Don Sixto mining area in Mendoza province, central‐western Argentina, contains an epithermal low sulfidation Au–Ag deposit. It is a small deposit (～4 km2), with a gold resource of 36 t. In Don Sixto, ore minerals are disseminated in the hydrothermal quartz veins and hydrothermally altered volcanic‐pyroclastic rock units of Permian–Triassic age. On the basis of the texture, ore mineral paragenesis and cross cutting relationship of gangue minerals, seven stages of mineralization were recognized and described. The first six stages are characterized by quartz veins with minor amounts of base metal minerals and the last stage is represented by fluorite veins with minimal quantities of base metal minerals; the precious metal mineralization is mainly related to the fourth stage. The hydrothermal veins exhibit mainly massive, crustiform and comb infilling textures; the presence of bladed quartz replacement textures and quartz veins with adularia crystals are indicative of boiling processes in the system. Fluid inclusion and complementary stable isotope studies were performed in quartz, fluorite, and pyrite samples from the vein systems. The microthermometric data were obtained from primary, biphasic (liquid‐vapor) fluid inclusion assemblages in quartz and fluorite. The maximum values for salinity and homogenization temperature (Th) came from the stage IV where quartz with petrographic evidence of boiling has average values of 4.96 wt% NaClequiv. and 286.9°C respectively. The lower values are related to the last stage of mineralization, where the fluid inclusions in fluorite have average salinities of 1.05 wt% NaClequiv. and average homogenization temperatures of 173.1°C. The oxygen and sulfur isotopic fractionation was analyzed in quartz and pyrite. The calculated isotopic fractionation for oxygen in the hydrothermal fluid is in the range of δ18OH2O = ?6.92 up to ?3.08‰, which indicates dominance of a meteoric source for the water, while sulfur reaches δ34SH2S = 1.09‰, which could be reflecting a possible magmatic, or even a mixed source.  相似文献   

3.
Abstract: In the Hishikari low-sulfidation epithermal gold deposit, Japan, columnar adularia crystals commonly precipitated directly on to the fracture surface of wall rock, and then electrum precipitated on the columnar adularia with fine-grained adularia and quartz. To reveal the characteristics of mineralizing fluids and the elevation of paleo-water tables at the earliest stage of mineralization in the Honko-Sanjin zone of the Hishikari deposit, the fluid inclusions in the columnar adularia in gold-bearing quartz–adularia veins were studied.
Coexistence of vapor-rich and liquid-rich two–phase primary fluid inclusions indicates the deposition of columnar adularia from boiling fluids. The precipitation temperatures range from 175 to 215C, and generally increase with depth. The temperatures of final melting point of ice range from –1.2 to –0.1C with an average of –0.5C, corresponding to salinity ranging from 0.2 to 2.1 wt% NaCl equivalent with an average of 0.9 wt% NaCl (eq.). Concentrations of non-condensable gases such as CO2 were under the detection limit of a laser Raman microprobe spectrometer. From the precipitation temperature of columnar adularia in the Hosen–2 vein and the boiling point – depth curve for a 0.9 wt% NaCl (eq.) fluid, paleo-water table was estimated to be at an elevation of about +170 m. The elevation of the paleo-water tables for other veins was estimated to range from +140 to +215 m.  相似文献   

4.
Gold‐mineralized quartz veins at the Trenggalek district of the Southern Mountains Range in East Java, Indonesia, are hosted by Oligo‐Miocene volcaniclastic and volcanic rocks, and are distributed close to andesitic plugs in the northern prospects (Dalangturu, Suruh, Jati, Gregah, Jombok, Salak, and Kojan) and the southern prospects (Sentul and Buluroto). The plugs are subalkaline tholeiitic basaltic‐andesite to calc‐alkaline andesite in composition. 40Ar–39Ar dating of a quartz‐adularia vein at the Dalangturu prospect yielded an age of 16.29 ± 0.56 Ma (2σ), and a crystal tuff of a limestone‐pyroclastic rock sequence at the southwest of the Dalangturu prospect was determined as 15.6 ± 0.5 Ma (2σ). Statistic overlap of ages suggests that the gold mineralization in the northern prospects took place in a shallow marine to subaerial transitional environment. Hydrothermal alteration of the host rocks is characterized by the replacement of quartz, illite and adularia. Quartz veins in surface outcrops are up to 50 cm wide in the northern prospects and up to 3 m wide in the southern prospects, showing a banded or brecciated texture, and are composed of quartz, adularia, carbonates with pyrite, electrum, sphalerite, galena, and polybasite. Gold contents of quartz veins are positively correlated with Ag, Zn, Pb, and Cu contents in both the northern and southern prospects. The quartz veins at the Jati, Gregah, and Sentul prospects have relatively lower gold‐silver ratios (Ag/Au = 23.2) compared to those at the Kojan, Dalangturu, Salak, and Suruh prospects (Ag/Au = 66.8). The quartz veins at the Dalangturu prospect are relatively rich in base metal sulfides. Ag/(Au+Ag) ratios of electrum in the Dalangturu prospect range from 45.2 to 65.0 at%, and FeS contents of sphalerite range from 1.2 to 6.4 mol%. Fluid inclusion microthermometry indicates ore‐forming temperatures of 190–200°C and 220–230°C at the Sentul and Kojan prospects, respectively. Widely variable vapor/liquid ratio of fluid inclusions indicates that fluid boiling took place within the hydrothermal system at the Sentul prospect. Salinities of ore‐fluids range from 0 to 0.7 wt% (av. 0.4 wt% NaCl equiv.) and from 0.5 to 1.4 wt% (av. 0.9 wt%) for the Sentul and Kojan prospects, respectively. The boiling of hydrothermal fluid was one of the gold deposition mechanisms in the Sentul prospect.  相似文献   

5.
The Falun gold quartz vein mineralization is located ca 230 km NW of Stockholm, Sweden, within the Early Proterozoic volcano-sedimentary sequence of Bergslagen. The mineralization consists of a system with subparallel quartz veins that crosscut the alteration zone to the Falun massive sulphide deposit. Early barren and late gold-bearing quartz veins follow tectonic structures postdating the formation of the massive sulphide ore. Both generations of veins are epigenetic to the massive sulphide ore and were formed by hydrothermal processes. Fluid inclusion study of the gold-bearing quartz veins indicates a low-moderately saline fluid (0.3 to 17.4 equiv wt% NaCl). Heterogeneous trapping is indicated by coexisting inclusions showing a variable CO2 content from 100% CO2 ± CH4 to 100% aqueous fluid. Temperatures of total homogenization also show a wide spread from 116–350°C with a slightly bimodal distribution with peaks at ca 180°C and 280°C. MeasuredδD values — 69 to — 63%0 (SMOW), of inclusion fluid and calculatedδ 18O values of hydrothermal fluids — 7.5 to — 1.4%0 (SMOW), strongly suggest a meteoric origin for the fluids. The quite consistentδD values and the range inδ 18O values indicate that major water-rock interaction led to the evolution inδ18O of the hydrothermal fluids.  相似文献   

6.
The Chehugou Mo–Cu deposit, located 56 km west of Chifeng, NE China, is hosted by Triassic granite porphyry. Molybdenite–chalcopyrite mineralization of the deposit mainly occurs as veinlets in stockwork ore and dissemination in breccia ore, and two ore‐bearing quartz veins crop out to the south of the granite porphyry stock. Based on crosscutting relationships and mineral paragenesis, three hydrothermal stages are identified: (i) quartz–pyrite–molybdenite ± chalcopyrite stage; (ii) pyrite–quartz ± sphalerite stage; and (iii) quartz–calcite ± pyrite ± fluorite stage. Three types of fluid inclusions in the stockwork and breccia ore are recognized: LV, two‐phase aqueous inclusions (liquid‐rich); LVS, three‐phase liquid, vapor, and salt daughter crystal inclusions; and VL, two‐phase aqueous inclusions (gas‐rich). LV and LVS fluid inclusions are recognized in vein ore. Microthermometric investigation of the three types of fluid inclusions in hydrothermal quartz from the stockwork, breccia, and vein ores shows salinities from 1.57 to 66.75 wt% NaCl equivalents, with homogenization temperatures varying from 114°C to 550°C. The temperature changed from 282–550°C, 220–318°C to 114–243°C from the first stage to the third stage. The homogenization temperatures and salinity of the LV, LVS and VL inclusions are 114–442°C and 1.57–14.25 wt% NaCl equivalent, 301–550°C and 31.01–66.75 wt% NaCl equivalent, 286–420°C and 4.65–11.1 wt% NaCl equivalent, respectively. The VL inclusions coexist with the LV and LVS, which homogenize at the similar temperature. The above evidence shows that fluid‐boiling occurred in the ore‐forming stage. δ34S values of sulfide from three type ores change from ?0.61‰ to 0.86‰. These δ34S values of sulfide are similar to δ34S values of typical magmatic sulfide sulfur (c. 0‰), suggesting that ore‐forming materials are magmatic in origin.  相似文献   

7.
We discuss the nature of the ore-forming hydrothermal fluid in the Noya gold-bearing calcite-quartz-adularia veins of central Kyushu, Japan on the basis of oxygen, carbon, and strontium isotope ratios, and aqueous speciation calculations for the present-day geothermal fluid. The isotopic values of the Noya ore-forming fluid were estimated to be −6.5‰ for δ13C and −7.5‰ for δ18O. The oxygen isotopic equilibrium temperatures for vein calcite are more than 180°C at the bottom of the Noya mineralization zone, and decrease with increasing elevation. As the temperature decreased, the dominant carbon species in the fluid changed from H2CO3 to HCO3- at about 120°C. The equilibrium temperatures for vein quartz are consistent with the calcite calculations. The carbon and oxygen isotope trends of the Noya vein calcite and the isotope ratios of strontium suggest that the fluids that precipitated the Noya veins were controlled by an andesite-dominated geology. Chondrite-normalized REE patterns for the white-colored veins from wells 51-WT-1 and 51-WT-2 displayed a light REE-rich pattern with positive Eu anomalies, suggesting the existence of a reducing environment for the fluid. The pyrite-rich gray-colored veins and a silicified rock from well 51-WT-2 showed higher REE concentrations than did the white veins. Altered host andesitic rocks have similar REE patterns to that of the silicified rock, and have higher REE contents than the others in the drill cores. Aqueous speciation calculations showed that the fluid in the hydrothermal reservoir is currently in muscovite stability. The fluid at the ore-mineralization stage may have contained more potassium or have had a higher pH, so that adularia precipitated with calcite and quartz, as well as gold. Fluid boiling at depth in the system produced the gold-bearing calcite-quartz-adularia veins.  相似文献   

8.
Numerous gold deposits and occurrences were recognized in the regions of tectonomagmatic activation in the southeastern Siberian Platform. They are located in four metallogenic zones: the Ket-Kap (skarns, quartz veins, and stockworks; gold-bearing lodes in silicitolites; and argillisite-sericite metasomatites), Ulkan (clayey-micaceous metasomatites, quartz veins), Preddzhugdzhur (quartz veins, skarns, and sericite-hydromicaceous metasomatites), and Uda (sericite-hydromicaceous metasomatites). The skarn mineralization is of Meosozoic age, while the mineralization in the quartz veins, quartz-hydromicaceous metasomatites, and quartz-sulfide veins may have a Meosozoic, Paleozoic, or Late Paleozoic age. The highest temperatures were determined for the ore formation in the Preddzhugdzhur skarns (500–715 °C) and the hydrothermal-metasomatic rocks of the Ket-Kap zone (510–530 °C). The composition of gas-liquid inclusions in the minerals of these rocks is dominated by aqueous Na, K, and Ca chloride solutions with salinity up to 40 wt % NaCl equiv; fluid contains CO2. Quartz veins and stockworks of the Ket-Kap zone were formed under high (up to 465°C) and moderate temperatures and salinity up to 32 wt % NaCl equiv. Sometimes, the minerals in these rocks contain inclusions of low-density CO2. The gold-bearing veins of the Preddzhugdzhur zone formed at 225–230°C and salinity of 1–2 wt % NaCl equiv. The ore-bearing solutions in the gold-bearing veins of the Ulkan zone are characterized by a potassium-sodium-chlorine composition and salinity of 2–10 wt % NaCl equiv., and the temperature of their formation was 220–280 °C.  相似文献   

9.
The Daraloo field is located in the southeast of Iran (Kerman province). It is associated with Oligomiocene diorite/granodiorite to quartz monzonite stocks. Copper mineralization is basically relevant to potassic and phyllic alteration zones. Petrographic and geologic studies imply that mineralization is restricted to two major parts locating in the center and east of district. The larger central mineralization has a northwest–southeast trend perpendicular to the smaller one. Hydrothermal ore fluid formation occurred in relatively deep levels thereafter faulting and fracturing provided appropriate conduits to ascend fluids through shallower depths. Early hydrothermal alteration produced a confined potassic assemblage in the central and eastern parts of the stock. Two main fluid inclusion groups in relationship with alteration ore fluids have been identified. They are liquid-rich inclusions containing solid phases, with high temperatures (257°C to 554°C) and high salinities (31 to 67 wt.% NaCl equiv.), and vapor-rich inclusions with high temperatures and low salinities without any solid phases. These magmatic source fluids are responsible for boiling and also potassic and phyllic alteration zone. They also resulted in the formation of quartz groups I and II veins and chalcopyrite deposition. Propylitic alteration is attributed to a Ca-rich meteoric fluid. Inclusions originated from this fluid are liquid-rich having low temperatures (161°C to 269°C) and low salinities (1 to 13 wt.% NaCl). Mixing descending meteoric water with magmatic fluids reduces considerably the salinity of magmatic fluid. Mixing is also the impetus of leaching copper from potassic to the phyllic zone. It is possible to conclude that all these procedures are controlled by the main faults of district having NW–SE trend. Two fundamental events affecting the mineralization are cooling ore-bearing fluids and magnetite (±pyrite) emplacement. The latter one is formed in potassic and phyllic alteration zone in which copper-bearing fluids have interaction with magnetite minerals and so chalcopyrite minerals have been formed nearby magnetites. Temperature and pressure of hydrothermal fluid differentiation could be applied as a predictive tool to discriminate between barren and productive copper porphyry deposits. A simple comparison of temperature and pressure variations between Daraloo deposit and other copper porphyry deposits located in the same belt of Iran (Sahand-Bazman belt) illuminates that Daraloo system has high range of pressure implying deeper exsolution of hydrothermal fluid. On the other hand, economic mineralization has direct relationship with temperature range of orthomagmatic fluids so that if a deposit has a wide range of high temperature fluids, it could be inferred as a barren deposit. In conclusion, it could be inferred that Daraloo district can be categorized as a sub-economic porphyry deposit. On the other hand, restricted formation of chalcopyrite and the other copper-bearing minerals besides large amounts of magnetite and pyrite can approve obviously the low grade of mineralization in Daraloo district.  相似文献   

10.
The Hujiayu Cu deposit,representative of the "HuBi-type" Cu deposits in the Zhongtiao Mountains district in the southern edge of the North China Craton,is primarily hosted in graphitebearing schists and carbonate rocks.The ore minerals comprise mainly chalcopyrite,with minor sphalerite,siegenite[(Co,Ni)_3S_4],and clausthalite[Pb(S,Se)].The gangue minerals are mainly quartz and dolomite,with minor albite.Four fluid inclusion types were recognized in the chalcopyrite-pyrite-dolomite-quartz veins,including CO_2-rich inclusions(type Ⅰ),low-salinity,liquid-dominated,biphase aqueous inclusions(type Ⅱ),solid-bearing aqueous inclusions(type Ⅲ),and solid-bearing aqueous-carbonic inclusions(type Ⅳ).Type I inclusion can be further divided into two sub-types,i.e.,monophase CO_2 inclusions(type Ⅰa) and biphase CO_2-rich inclusions(with a visible aqueous phase),and type Ⅲ inclusion is divided into a subtype with a halite daughter mineral(type Ⅲa) and a subtype with multiple solids(type Ⅲb).Various fluid inclusion assemblages(FIAs) were identified through petrographic observations,and were classified into four groups.The group-1 FIA,consisting of monophase CO_2 inclusions(type Ⅰa),homogenized into the liquid phase in a large range of temperatures from-1 to 28℃,suggesting post-entrapment modification.The group-2 FIA consists of type Ⅰb,Ⅲb and Ⅳ inclusions,and is interpreted to reflect fluid immiscibility.The group-3 FIA comprises type Ⅱ and Ⅲa inclusions,and the group-4FIA consists of type Ⅱ inclusions with consistent phase ratios.The group-1 and group-2 FIAs are interpreted to be entrapped during mineralization,whereas group-3 and group-4 FIAs probably represent the post-mineralization fluids.The solid CO_2 melting temperatures range from-60.6 to56.6℃ and from-66.0 to-63.4℃ for type Ⅰa and type Ⅳ inclusions,respectively.The homogenization temperatures for type Ⅱ inclusions range from 132 to 170℃ for group-3 FIAs and115 to 219℃ for group-4 FIAs.The halite melting temperatures range from 530 to 562℃ for typeⅢ b and Ⅳ inclusions,whereas those for type Ⅲa inclusions range from 198 to 398℃.Laser Raman and SEM-EDS results show that the gas species in fluid inclusions are mainly CO_2 with minor CH_4,and the solids are dominated by calcite and halite.The calcite in the hosting marble and dolomite in the hydrothermal veins have δ~(13)C_(V-pdb) values of-0.2 to 1.2‰ and-1.2 to-6.3‰,and δ~(18)O_(v-smow) values of 14.0 to 20.8 ‰ and 13.2 to 14.3‰,respectively.The fluid inclusion and carbon-oxygen isotope data suggest that the ore-forming fluids were probably derived from metamorphic fluids,which had reacted with organic matter in sedimentary rocks or graphite and undergone phase separation at 1.4-1.8 kbar and 230-240℃,after peak metamorphism.It is proposed that the Hujiayu Cu deposit consists of two mineralization stages.The early stage mineralization,characterized by disseminated and veinlet copper sulfides,probably took place in an environment similar to sediment-hosted stratiform copper mineralization.Ore minerals formed in this precursor mineralization stage were remobilized and enriched in the late metamorphic hydrothermal stage,leading to the formation of thick quartz-dolomite-sulfides veins.  相似文献   

11.
Abstract. Mineral assemblage, precipitation sequence and textures of the gold‐bearing veins from the Hishikari epithermal vein‐type deposits, southern Kyushu, Japan, were examined. In addition, fluid inclusion microthermometry and carbon and oxygen isotopic compositions of calcite were determined. Calcite, and that replaced by quartz, were commonly observed throughout the precipitation sequence of the veins. Thus, calcite must be a more common gangue constituent initially than observed presently. Association of calcite and electrum is observed immediately subsequent to columnar adularia in some vein samples. In addition, close association of electrum with pseudo‐acicular quartz, and electrum with truscottite were observed. The initial coprecipitation of electrum and calcite might be a common phenomenon in the gold‐bearing veins at the Hishikari deposits. The Th (homogenization temperature) data from the Honko‐Sanjin deposits are generally higher than those from the Yamada deposit. Samples that show association of calcite and electrum yielded higher Th (206–217°C, average) than the Th data from calcite associated with low‐grade Au ore or barren (180–204°C, average). The measured Tm (temperature of last melting point of ice) range from ‐0.4 to 0.0°C. The result suggests that the salinity of the hydrothermal solution was low during the precipitation both of calcite associated with Au mineralization and of barren calcite. Fluid inclusion evidence suggestive of boiling of hydrothermal solution for the precipitation of calcite was not recognized in the present work. The δ13C and δ18O values of calcite range from ‐10.8 to —4.7 % and from +3.2 to +15.2 %, respectively. The δ13C value of H2CO3 and the δ18O value of H2O in the hydrothermal fluids calculated assuming isotopic equilibrium with calcite using the temperature obtained by fluid inclusion microthermometry, range from ‐14.4 to ‐9.1 %, and from ‐6.2 to +5.5 %, respectively. Thus, the calculated δ18O values of H2O for calcite further confirm the presence of the 18O‐enriched ore fluids during the mineralization at the Hishikari deposits. The hydrothermal solution isotopically equilibrated with the sedimentary basement rocks was responsible for the gold mineralization associated with calcite.  相似文献   

12.
The Guanajuato epithermal district is one of the largest silver producers in Mexico. Mineralization occurs along three main vein systems trending dominantly northwest–southeast: the central Veta Madre, the La Luz system to the northwest, and the Sierra system to the east. Mineralization consists dominantly of silver sulfides and sulfosalts, base metal sulfides (mostly chalcopyrite, galena, sphalerite, and pyrite), and electrum. There is a broad zonation of metal distribution, with up to 10 % Cu+Pb+Zn in the deeper mines along the northern and central portions of the Veta Madre. Ore occurs in banded veins and breccias and as stockworks, with gangue composed dominantly of quartz and calcite. Host rocks are Mesozoic sedimentary and intrusive igneous rocks and Tertiary volcanic rocks. Most fluid inclusion homogenization temperatures are between 200 and 300 °C, with salinities below 4 wt.% NaCl equivalent. Fluid temperature and salinity decreased with time, from 290 to 240 °C and from 2.5 to 1.1 wt.% NaCl equivalent. Relatively constant fluid inclusion liquid-to-vapor ratios and a trend of decreasing salinity with decreasing temperature and with increasing time suggest dilution of the hydrothermal solutions. However, evidence of boiling (such as quartz and calcite textures and the presence of adularia) is noted along the Veta Madre, particularly at higher elevations. Fluid inclusion and mineralogical evidence for boiling of metal-bearing solutions is found in gold-rich portions of the eastern Sierra system; this part of the system is interpreted as the least eroded part of the district. Oxygen, carbon, and sulfur isotope analysis of host rocks, ore, and gangue minerals and fluid inclusion contents indicate a hydrothermal fluid, with an initial magmatic component that mixed over time with infiltrating meteoric water and underwent exchange with host rocks. Mineral deposition was a result of decreasing activities of sulfur and oxygen, decreasing temperature, increasing pH, and, in places, boiling.  相似文献   

13.
The Asachinskoe epithermal Au‐Ag deposit is a representative low‐sulfidation type of deposit in Kamchatka, Russia. In the Asachinskoe deposit there are approximately 40 mineralized veins mainly hosted by dacite–andesite stock intrusions of Miocene–Pliocene age. The veins are emplaced in tensional cracks with a north orientation. Wall‐rock alteration at the bonanza level (170–200 m a.s.l.) consists of the mineral assemblage of quartz, pyrite, albite, illite and trace amounts of smectite. Mineralized veins are well banded with quartz, adularia and minor illite. Mineralization stages in the main zone are divided into stages I–IV. Stage I is relatively barren quartz–adularia association formed at 4.7 ± 0.2 Ma (K‐Ar age). Stage II consists of abundant illite, Cu‐bearing cryptomelane and other manganese oxides and hydroxides, electrum, argentite, quartz, adularia and minor rhodochrosite and calcite. Stage III, the main stage of gold mineralization (4.5–4.4 ± 0.1–3.1 ± 0.1 Ma, K‐Ar age), consists of a large amount of electrum, naumannite and Se‐bearing polybasite with quartz–adularia association. Stage IV is characterized by hydrothermal breccia, where electrum, tetrahedrite and secondary covellite occur with quartz, adularia and illite. The concentration of Au+Ag in ores has a positive correlation with the content of K2O + Al2O3, which is controlled by the presence of adularia and minor illite, and both Hg and Au also have positive correlations with the light rare‐earth elements. Fluid inclusion studies indicate a salinity of 1.0–2.6 wt% NaCl equivalent for the whole deposit, and ore‐forming temperatures are estimated as approximately 160–190°C in stage III of the present 218 m a.s.l. and 170–180°C in stage IV of 200 m a.s.l. The depth of ore formation is estimated to be 90–400 m from the paleo‐water table for stage IV of 200 m a.s.l., if a hydrostatic condition is assumed. An increase of salinity (>CNaCl≈ 0.2 wt%) and decrease of temperature (>T ≈ 30°C) within a 115‐m vertical interval for the ascending hydrothermal solution is calculated, which is interpreted as due to steam loss during fluid boiling. Ranges of selenium and sulfur fugacities are estimated to be logfSe2 = ?17 to ?14.5 and logfS2 = ?15 to ?12 for the ore‐forming solution that was responsible for Au‐Ag‐Se precipitation in stage III of 200 m a.s.l. Separation of Se from S‐Se complex in the solution and its partition into selenides could be due to a relatively oxidizing condition. The precipitation of Au‐Ag‐Se was caused by boiling in stage III, and the precipitation of Au‐Ag‐Cu was caused by sudden decompression and boiling in stage IV.  相似文献   

14.
目前冈底斯成矿带报道的斑岩型矿床主要集中在东段,而鲁尔玛斑岩型铜(金)矿为冈底斯成矿带西段新发现的铜矿,具有钾硅酸盐化、绢英岩化、青磐岩等明显的斑岩型矿床蚀变特征.其热液脉体从早到晚化分为:钾硅酸盐化脉(A脉)、石英-金属硫化物脉(B脉)以及石英-绿帘石-碳酸盐化脉(D脉).对各阶段热液脉体的的流体包裹体进行了岩相学、显微测温、显微激光拉曼和H-O-C同位素等分析.发现A脉石英中流体包裹体的形成温度集中在390~460℃,盐度介于4.5%~21.6%NaCleqv和43.6%~59.6%NaCleqv两个区间;B脉石英中流体包裹体的形成温度集中在310~380℃,盐度介于3.6%~19.8%NaCleqv和6.0%~16.0%NaCleqv两个区间;D脉石英和方解石中流体包裹体的形成温度集中在200~320℃,盐度集中在0.4%~14.7%NaCleqv.拉曼分析表明,鲁尔玛铜(金)矿的流体包裹体含CO2、N2、CH4等气体及石盐子晶和多种金属硫化物和金属氧化物子晶.各热液脉体石英中流体包裹体的δDH2O,V-SMOW值的变化范围为-128‰^-110‰,δ18OH2O,V-SMOW值的变化范围为-9.09‰^-1.45‰,方解石的δ13CCal,V-PDB值的变化范围为-20.8‰^-19.8‰,δ18OCal,V-SMOW值的变化范围为-5.9‰^-4.9‰,展现出岩浆热液的特征,晚期还有大气降水的加入.研究结果显示,成矿流体属高温、高盐度、含CO2、N2、CH4等气体和Cu、Fe、Mo等金属元素的Ca+-Na+-Cl-H2O体系流体,具有典型的斑岩型铜矿床成矿流体的特征.成矿流体从深部封闭体系运移到浅部的开放体系,温压环境突变导致金属硫化物沉淀,形成A脉和B脉型矿化.随着成矿物质的大量析出,同时伴随着大气降水等因素的影响,流体温度、盐度迅速降低,产生D脉型矿化.  相似文献   

15.
Abstract: The origin of mineralizing fluids responsible for the Hishikari vein-type epithermal Au deposits was studied on the basis of the hydrogen isotopic ratio (δD) of the inclusion fluid from vein quartz and adularia. The origin of hydrothermal fluids was estimated by combination of the present δ values and the oxygen isotopic ratios (δ18O) previously reported by Shikazono and Nagayama (1993). The water in the fluid inclusions was extracted by means of decrepitation of quartz at 500°C. Hydrogen was obtained by reduction of the collected water with Zn shot at 450°C. The δD values were determined by mass spectrometer. The δD values of inclusion fluid obtained from quartz range from –61 to –114%. These are significantly lower than the δD value of the thermal water presently venting from the Hishikari deposits and that of local meteoric water. Hydrogen isotopic fractionation between water and amorphous silica, which might have initially precipitated from the hydrothermal fluids at least partly, is not a probable cause of this isotopic depletion, while some water might have been released from the initial hydrous amorphous silica during recrystallization to quartz observed presently. Thus, a part of ore fluids for the Hishikari deposits is supposed to have been originated from the water having anomalous δD values of lower than –100%. Such D depletion cannot be caused by simple oxygen-shift of meteoric water or by contribution of magmatic volatiles. The δD values of water released from the shale samples of the Shimanto–Supergroup, a major host to the Hishikari veins range from –132 to –148%. Therefore, the anomalous δD values of inclusion fluids from some vein quartz and adularia suggest that the water released from hydrous minerals of the sedimentary basement rocks by dehydration or the groundwater isotopically exchanged with sedimentary rocks at elevated temperatures during circulation, partly contributed to the hydrothermal fluids responsible for the Hishikari deposits.  相似文献   

16.
Detailed hydrothermal alteration investigations, including petrography, infrared reflectance spectroscopy (IRS) and XRD of the low sulfidation epithermal Co–O mine, located in Eastern Mindanao (Philippines) revealed that both distal and intermediate hydrothermal alteration zones contain dominantly illite and chlorite, whereas the proximal alteration zone comprises mainly illite, chalcopyrite and pyrite. The gold-bearing veins and the proximal hydrothermal alteration zone display a distinct absence of K-rich hydrothermal alteration minerals such as K-feldspar (adularia).Gold mineralization in the Co–O mine is controlled by an extensive quartz-breccia vein system, which is characterized by three distinct stages of vein (incl. breccias) formation. Gold is mainly observed in stages 2 and 3 veins. Stage 1 veins appear as fragments in stage 2 veins and display boiling textures such as quartz pseudomophs after bladed calcite. These veins further display colloform to crustiform banding and contain pyrite, chalcopyrite and minor gold located in the colloform bands and between bladed quartz pseudomorphs. Stage 2 veins comprise mostly banded to massive quartz and contains sulfides parallel to bands or disseminated. These veins are fine-grained with mosaic/jigsaw quartz and contain calcite blebs and/or fragments of stage 1 veins. Gold is in textural equilibrium with chalcopyrite, sphalerite, and locally pyrite. Stage 3 veins consist of quartz and carbonate (locally Mn-rich), and display irregular banded and comb textures. In auriferous veins of this stage gold is in textural equilibrium with chalcopyrite and pyrite (with local abundance of sphalerite). Other sulfide minerals observed with gold in stages 2 and 3 are galena, acanthite and locally jalpaite.The XRD and IRS provide inconsistent results regarding the abundance of K-rich clays (e.g., illite) associated with auriferous veins. Illite, with possibly interlayered swelling clays, such as Al-smectite, was identified in auriferous vein stages 2 and 3 using IRS, but could not be confirmed by XRD. Comparative analysis of the results of these techniques with respect to the ordering of micaceous minerals, suggest less ordered white mica proximal to the veins.Vein textures such as banded quartz, the absence of K-feldspar and the abundance of illite (interlayered Al-smectite) suggest relatively low temperatures of formation of the hydrothermal alteration system and point to a potential boiling horizon located deeper or marginal to the currently exploited levels of the Co–O mine. The absence of K-feldspar may also be related to relatively low temperatures of the hydrothermal fluid, the medium potassium-rich magma series of the host rocks, and/or a relatively low oxidation state of the hydrothermal fluid.  相似文献   

17.
The Inkaya Cu-Pb-Zn-(Ag) mineralization, located about 20 km west of the Simav (Kütahya-Turkey), is situated in the northern part of the Menderes Massif Metamorphics. The mineralization is located along an E-W trending fault in the Cambrian Simav metamorphics consisting of quartz-muscovite schist, quartz-biotite schist, muscovite schist, biotite schist and the Ar?kayas? formation composed of marbles. Mineralized veins are 30–35 cm in width. The primary mineralization is represented by abundant galena, sphalerite, chalcopyrite, pyrite, fahlore and minor amounts of cerussite, anglesite, digenite, enargite, chalcocite, covellite, bornite, limonite, hematite and goethite with gangue quartz. Fluid inclusion studies on the quartz samples collected from the mineralized veins indicate that the temperature range of the fluids is 235°C to 340°C and the salinities are 0.7 to 4.49 wt. % NaCl equivalent. The wide range of homogenization temperatures indicates that two different fluid generations were trapped in quartz. Sulfur isotope studies of the sulfide minerals showed that all of the δ 34S values are between ?2.1 and 2.6 per mil. These values are a typical range for hydrothermal sulfide minerals that have sulfur derived from a magmatic source. Pyrite-galena and pyrite-chalcopyrite sulfur isotope fractionation is consistent with an approach to isotopic equilibrium, and calculated temperatures are 254.6 and 277.4°C for pyrite-galena and 274.7°C for pyrite-chalcopyrite. The microthermometric data and sulfur isotope thermometry indicate the existence of a hydrothermal fluid that circulated along the fault crossing the Simav metamorphics and Ar?kayas? formation. Fluid inclusion and sulfur isotope thermometry can be used in combination with ore petrographical and geological information to provide site-specific targets for meso-hypothermal metal concentrations.  相似文献   

18.
Mineralogic studies of major ore minerals and fluid inclusion analysis in gangue quartz were carried out for the for the two largest veins, the Aginskoe and Surprise, in the Late Miocene Aginskoe Au–Ag–Te deposit in central Kamchatka, Russia. The veins consist of quartz–adularia–calcite gangue, which are hosted by Late Miocene andesitic and basaltic rocks of the Alnei Formation. The major ore minerals in these veins are native gold, altaite, petzite, hessite, calaverite, sphalerite, and chalcopyrite. Minor and trace minerals are pyrite, galena, and acanthine. Primary gold occurs as free grains, inclusions in sulfides, and constituent in tellurides. Secondary gold is present in form of native mustard gold that usually occur in Fe‐hydroxides and accumulates on the decomposed primary Au‐bearing tellurides such as calaverite, krennerite, and sylvanite. K–Ar dating on vein adularia yielded age of mineralization 7.1–6.9 Ma. Mineralization of the deposit is divided into barren massive quartz (stage I), Au–Ag–Te mineralization occurring in quartz‐adularia‐clays banded ore (Stage II), intensive brecciation (Stage III), post‐ore coarse amethyst (Stage IV), carbonate (Stage V), and supergene stages (Stage VI). In the supergene stage various secondary minerals, including rare bilibinskite, bogdanovite, bessmertnovite metallic alloys, secondary gold, and various oxides, formed under intensely oxidized conditions. Despite heavy oxidation of the ores in the deposit, Te and S fugacities are estimated as Stage II tellurides precipitated at the log f Te2 values ?9 and at log fS2 ?13 based on the chemical compositions of hypogene tellurides and sphalerite. Homogenization temperature of fluid inclusions in quartz broadly ranges from 200 to 300°C. Ore texture, fluid inclusions, gangue, and vein mineral assemblages indicate that the Aginskoe deposit is a low‐sulfidation (quartz–adularia–sericite) vein system.  相似文献   

19.
This study reports a complex fluid and thermal history using petrography, electron microprobe, isotopic analysis and fluid inclusions in replacement minerals within gypsum pseudomorphs in Tithonian-Berriasian lacustrine deposits in Northern Spain. Limestones and dolostones, formed in the alkaline lakes, contain lenticularly shaped gypsum pseudomorphs, considered to form in an evaporative lake. The gypsum was replaced by quartz and non-ferroan calcite (Ca-2), which partially replaces the quartz. Quartz contains solid inclusions of a preexisting non-ferroan calcite (Ca-1), anhydrite and celestine. High homogenization temperatures (T h ) values and inconsistent thermometric behaviour within secondary fluid inclusion assemblages in quartz (147?C351°C) and calcite (108?C352°C) indicate high temperatures after precipitation and entrapment of lower temperature FIAs. Th are in the same range as other reequilibrated fluid inclusions from quartz veins in the same area that are related to Cretaceous hydrothermalism. Gypsum was replaced by anhydrite, likely during early burial. Later, anhydrite was partially replaced by Ca-1 associated with intermediate burial temperatures. Afterward, both anhydrite and Ca-1 were partially replaced by quartz and this by Ca-2. All were affected during higher temperature hydrothermalism and a CO2-H2O fluid. Progressive heating and hydrothermal pulses, involving a CO2-H2O fluid, produce the reequilibration of the FIAs, which was followed by uplift and cooling.  相似文献   

20.
The recently discovered Xiaobeigou fluorite deposit is situated in the southern part of the Southern Great Xing'an Range metallogenic belt. Fluorite‐bearing veins are rather common over the whole area. So far, 11 mineralized veins have been delineated at the Xiaobeigou deposit. Orebodies of the deposit are mainly hosted in Permian and Jurassic volcano‐sedimentary rocks. The orebodies in this mining district exhibit a well‐developed vertical zonation: from top to bottom, the orebodies can be divided into upper, central, and lower zones. The central zone is the most important part for mining operations, and it shows lateral zonation of fluorite mineralization. Rare earth element (REE) contents of the investigated samples are relatively low (less than 30.2 ppm). Furthermore, the REE contents of the fluorite grains from early to late ore stages exhibit a decreasing trend. All the fluorite samples show no or slightly positive Eu anomalies. Three types of fluid inclusions (FIs) are distinguished in the quartz and fluorite samples, including pure‐liquid single‐phase (PL‐type), liquid‐rich two‐phase (L‐Type), and vapor‐rich two‐phase (V‐type) FIs. The FIs hosted in early‐stage quartz were homogenized at 159.5–260.7°C (mainly 160–240°C); their salinities range from 0.18 to 1.22 wt.% NaCl eqv. The FIs hosted in early‐stage fluorite yield slightly lower homogenization temperatures of 144.4–266.8°C (peaking at 140–220°C), which correspond to salinities of 0.18–0.88 wt.% NaCl eqv. Homogenization temperatures and salinities for the late stage are 132.5–245.8°C (mainly 160–180°C) and 0.18–1.40 wt.% NaCl eqv., respectively. Laser Raman spectroscopy of FIs shows that both the vapor and liquid compositions of the inclusions are dominated by H2O. The H–O isotopic compositions at Xiaobeigou suggest that the ore‐forming fluids are predominantly of meteoric water origin. The Xiaobeigou deposit can be classified as a typical low‐temperature hydrothermal vein‐type fluorite deposit. Combined with regional data, we infer that the fluorite mineralization occurred during the Late Mesozoic in an extensional setting.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号