首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Introducing and applying an appropriate strategy for reservoir modeling in strongly heterogeneous and fractured reservoirs is a controversial issue in reservoir engineering. Various integration approaches have been introduced to combine different sources of information and model building techniques to handle heterogeneity in geological complex reservoir. However, most of these integration approaches in several studies fail on modeling strongly fractured limestone reservoir rocks of the Zagros belt in southwest Iran. In this study, we introduced a new strategy for appropriate modeling of a production formation fractured rock. Firstly, different rock types in the study area were identified based on well log data. Then, the Sarvak Formation was divided into nine zones, and the thinner subzones were used for further fine modeling procedure. These subzones were separated based on different fracture types and fracture distribution in each zone. This strategy provided sophisticated distribution of petrophysical parameters throughout the grids of the model, and therefore, it can handle strong heterogeneity of the complex reservoir. Afterward, petrophysical parameters were used to produce an up-scaled 3D gridded petrophysical model. Subsequently, maps of petrophysical properties were derived for each zone of the Sarvak Formation. Evidences achieved in this study indicates Sarvak Formation zone 2 as the target production zone with better performance of reservoir rock and the southwestern part of the field as area of maximum porosity.  相似文献   

2.
Seismic wave propagation through the earth is often strongly affected by the presence of fractures. When these fractures are filled with fluids (oil, gas, water, CO2, etc.), the type and state of the fluid (liquid or gas) can make a large difference in the response of the seismic waves. This paper summarizes recent work on methods of deconstructing the effects of fractures, and any fluids within these fractures, on seismic wave propagation as observed in reflection seismic data. One method explored here is Thomsen's weak anisotropy approximation for wave moveout (since fractures often induce elastic anisotropy due to non-uniform crack-orientation statistics). Another method makes use of some very convenient crack/fracture parameters introduced previously that permit a relatively simple deconstruction of the elastic and wave propagation behaviour in terms of a small number of crack-influence parameters (whenever this is appropriate, as is certainly the case for small crack densities). Then, the quantitative effects of fluids on these crack-influence parameters are shown to be directly related to Skempton's coefficient B of undrained poroelasticity (where B typically ranges from 0 to 1). In particular, the rigorous result obtained for the low crack density limit is that the crack-influence parameters are multiplied by a factor  (1 − B )  for undrained systems. It is also shown how fracture anisotropy affects Rayleigh wave speed, and how measured Rayleigh wave speeds can be used to infer shear wave speed of the fractured medium in some cases. Higher crack density results are also presented by incorporating recent simulation data on such cracked systems.  相似文献   

3.
Summary. In order to separate the scattering effect from the intrinsic attenuation, we need a multiple scattering model for seismic wave propagation in random heterogeneous media. In this paper, we apply radiative transfer theory to seismic wave propagation and formulate in the frequency domain the energy density distribution in space for a point source. We consider the cases of isotropic scattering and strong forward scattering. Some numerical examples are shown. It is seen that the energy density–distance curves have quite different shapes depending on the values of medium seismic albedo B 0=ηs/(ηs+ηa) where ηs is the scattering coefficient and ηa is the absorption coefficient of the medium. For a high albedo ( B > 0.5) medium, the energy–distance curve is of arch shape and the position of the peak is a function of the extinction coefficient of the medium ηe=ηs+ηa. Therefore it is possible to separate the scattering effect and the absorption based on the measured energy density distribution curves.  相似文献   

4.
  相似文献   

5.
Generalized Born scattering of elastic waves in 3-D media   总被引：1，自引：0，他引：1  
It is well known that when a seismic wave propagates through an elastic medium with gradients in the parameters which describe it (e.g. slowness and density), energy is scattered from the incident wave generating low-frequency partial reflections. Many approximate solutions to the wave equation, e.g. geometrical ray theory (GRT), Maslov theory and Gaussian beams, do not model these signals. The problem of describing partial reflections in 1-D media has been extensively studied in the seismic literature and considerable progress has been made using iterative techniques based on WKBJ, Airy or Langer type ansätze. In this paper we derive a first-order scattering formalism to describe partial reflections in 3-D media. The correction term describing the scattered energy is developed as a volume integral over terms dependent upon the first spatial derivatives (gradients) of the parameters describing the medium and the solution. The relationship we derive could, in principle, be used as the basis for an iterative scheme but the computational expense, particularly for elastic media, will usually prohibit this approach. The result we obtain is closely related to the usual Born approximation, but differs in that the scattering term is not derived from a perturbation to a background model, but rather from the error in an approximate Green's function. We examine analytically the relationship between the results produced by the new formalism and the usual Born approximation for a medium which has no long-wavelength heterogeneities. We show that in such a case the two methods agree approximately as expected, but that in a media with heterogeneities of all wavelengths the new gradient scattering formalism is superior. We establish analytically the connection between the formalism developed here and the iterative approach based on the WKBJ solution which has been used previously in 1-D media. Numerical examples are shown to illustrate the examples discussed.  相似文献   

6.
The phase velocity and the attenuation coefficient of compressional seismic waves, propagating in poroelastic, fluid-saturated, laminated sediments, are computed analytically from first principles. The wavefield is found to be strongly affected by the medium heterogeneity. Impedance fluctuations lead to poroelastic scattering; variations of the layer compressibilities cause inter-layer flow (a 1-D macroscopic local flow). These effects result in significant attenuation and dispersion of the seismic wavefield, even in the surface seismic frequency range, 10–100 Hz. The various attenuation mechanisms are found to be approximately additive, dominated by inter-layer flow at very low frequencies. Elastic scattering is important over a broad frequency range from seismic to sonic frequencies. Biot's global flow (the relative displacement of solid frame and fluid) contributes mainly in the range of ultrasonic frequencies. From the seismic frequency range up to ultrasonic frequencies, attenuation due to heterogeneity is strongly enhanced compared to homogeneous Biot models. Simple analytical expressions for the P -wave phase velocity and attenuation coefficient are presented as functions of frequency and of statistical medium parameters (correlation lengths, variances). These results automatically include different asymptotic approximations, such as poroelastic Backus averaging in the quasi-static and the no-flow limits, geometrical optics, and intermediate frequency ranges.  相似文献   

7.
We investigate the effect of laterally varying earth structure on centroid moment tensor inversions using fundamental mode mantle waves. Theoretical seismograms are calculated using a full formulation of surface wave ray theory. Calculations are made using a variety of global tomographic earth models. Results are compared with those obtained using the so-called great-circle approximation, which assumes that phase corrections are given in terms of mean phase slowness along the great circle, and which neglects amplitude effects of heterogeneity. Synthetic tests suggest that even source parameters which fit the data very well may have large errors due to incomplete knowledge of lateral heterogeneity. The method is applied to 31 shallow, large earthquakes. For a given earthquake, the focal mechanisms calculated using different earth models and different forward modelling techniques can significantly vary. We provide a range of selected solutions based on the fit to the data, rather than one single solution. Difficulties in constraining the dip-slip components of the seismic moment tensor often produce overestimates of seismic moment, leading to near vertical dip-slip mechanisms. This happens more commonly for earth models not fitting the data well, confirming that more accurate modelling of lateral heterogeneity can help to constrain the dip-slip components of the seismic moment tensor.  相似文献   

8.
We present a technique based on the single-scattering approximation that relates time-lapse localized changes in the propagation velocity to changes in the traveltime of singly scattered waves. We describe wave propagation in a random medium with homogeneous statistical properties as a single-scattering process where the fluctuations of the velocity with respect to the background velocity are assumed to be weak. This corresponds to one of two end-member regimes of wave propagation in a random medium, the first being single scattering, and the second multiple scattering. We present a formulation that relates the change in the traveltime of the scattered waves to a localized change in the propagation velocity by means of the Born approximation for the scattered wavefield. We validate the methodology with synthetic seismograms calculated with finite differences for 2-D acoustic waves. Potential applications of this technique include non-destructive evaluation of heterogeneous materials and time-lapse monitoring of heterogeneous reservoirs.  相似文献   

9.
Elastic scattered waves from a continuous and heterogeneous layer   总被引：3，自引：0，他引：3  
Elastic scattering from a continuous and laterally unbounded heterogeneous layer has been formulated using the Born approximation. A general solution of the scattered wave equation for the above-stated medium has been given in terms of a Fourier integral over plane waves. Far-field asymptotic expressions for weak elastic scattering by a finite, continuous and inhomogeneous layer have been presented which agree with earlier results. For perturbations of the two elastic parameters and the density having the same form of spatial variation, the spectrum of plane waves scattered from a heterogeneous layer is expressed as a product of an 'elastic scattering factor'and a 'distribution factor'. As in earlier results for small-scale heterogeneity, the scattering pattern depends on various combinations of perturbations of elastic parameters and density. In order to show the general characteristics of the elastic wave scattering, some scattering patterns have been given.  相似文献   

10.
Summary. The paper presents the results of modelling of diffracted and reflected-diffracted waves in fracture zones. The Berryhill method was used and the calculations were made for a profile perpendicular to the diffracting edge. Several homogeneous models of the Earth's crust, characterized by different values of crustal thickness, velocity and horizontal distance between shot point and diffracting edge were considered. A dependence of the relative amplitude of diffracted waves on the location of the diffracting edge is given. The pattern of the seismic wavefield depends upon the dimensions of the fracture zone. Amplitude curves of reflected-diffracted waves are presented for a series of models of fracture zones. The possibility of applying the amplitudes of reflected-diffracted wave trains to the interpretation of the structure of fracture zones in the Earth's crust is andysed for different types of fracture zones.  相似文献   

11.
Laboratory measurements of ultrasonic wave propagation in tuffaceous sandstone (Kimachi, Japan) and granite (Iidate, Japan) were performed during increasing fracturing of the samples. The fracturing was achieved by unconfined uniaxial compression up to and beyond the point of macrofracture of the specimen using a constant low strain rate. The observed variation of wave velocity (up to 40 per cent) due to the development of micro- and macrofractures in the rock is interpreted by rock models relating velocity changes to damage and crack density. The calculated density of the newly formed cracks reaches higher values for the sandstone than for the granite. Using the estimated crack densities, the attenuation behaviour is interpreted in terms of different attenuation mechanisms; that is, friction and scattering. Rayleigh scattering as described by the model of Hudson (1981 ) may explain the attenuation qualitatively if the largest plausible crack dimensions are assumed in modelling.  相似文献   

12.
Anomalous seismic crustal structure of oceanic fracture zones   总被引：2，自引：0，他引：2  
Summary. The seismic structure of crust found within fracture zones falls outside the range of velocity structures observed for normal oceanic crust in the North Atlantic. The crust in fracture zones is frequently very thin and is characterized by low crustal velocities and by the conspicuous absence of a refractor with a velocity typical of oceanic layer 3. Anomalous crust is present in both large- and small-offset fracture zones. Since they are among the most common tectonic features in the ocean basins, and are particularly closely spaced on slow-spreading ridges, fracture zones represent a major source of seismic crustal heterogeneity. We interpret the anomalous crust as a thin, intensely fractured, faulted and hydrothermally altered basaltic and gabbroic section overlying ultramafics that, in places, are extensively serpentinized. The unusually thin crust found within fracture zones and the gradual crustal thinning over a distance of several tens of kilometres on either side of the fracture zones can be explained by two main processes; firstly the cold lithosphere edge opposite the spreading centre at the ridgetransform intersection modifies the normal intrusive and extrusive processes of the spreading centre leading to the accretion of an anomalous and thin igneous section; and secondly each spreading ridge segment is fed from a separate subcrustal magma supply point, so as the magma flows laterally down the spreading centre it generates a crustal section of decreasing thickness, culminating in the very thin crust of the fracture zones at either end of the ridge segment.  相似文献   

13.
Velocity estimation remains one of the main problems when imaging the subsurface with seismic reflection data. Traveltime inversion enables us to obtain large-scale structures of the velocity field and the position of seismic reflectors. However, as the media currently under study are becoming more and more complex, we need to know the finer-scale structures. The problem is that below a certain range of velocity heterogeneities, deterministic methods become difficult to use, so we turn to a probabilistic approach. With this in view, we characterize the velocity field as a random field defined by its first and second statistical moments. Usually, a seismic random medium is defined as a homogeneous velocity background perturbed by a small random field that is assumed to be stationary. Thus, we make a link between such a random velocity medium (together with a simple reflector) and seismic reflection traveltimes. Assuming that the traveltimes are ergodic, we use 2-D seismic reflection geometry to study the decrease in the statistical traveltime fluctuations as a function of the offset (the source–receiver distance). Our formulae are based on the Rytov approximation and the parabolic approximation for acoustic waves. The validity and the limits are established for both of these approximations in statistically anisotropic random media. Finally, theoretical inversion procedures are developed for the horizontal correlation structure of the velocity heterogeneities for the simplest case of a horizontal reflector. Synthetic seismograms are then computed (on particular realizations of random media) by simulating scalar wave propagation via finite difference algorithms. There is good agreement between the theoretical and experimental results.  相似文献   

14.
Numerical simulation of the propagation of P waves in fractured media   总被引：1，自引：0，他引：1  
We study the propagation of P waves through media containing open fractures by performing numerical simulations. The important parameter in such problems is the ratio between crack length and incident wavelength. When the wavelength of the incident wavefield is close to or shorter than the crack length, the scattered waves are efficiently excited and the attenuation of the primary waves can be observed on synthetic seismograms. On the other hand, when the incident wavelength is greater than the crack length, we can simulate the anisotropic behaviour of fractured media resulting from the scattering of seismic waves by the cracks through the time delay of the arrival of the transmitted wave. The method of calculation used is a boundary element method in which the Green's functions are computed by the discrete wavenumber method. For simplicity, the 2-D elastodynamic diffraction problem is considered. The rock matrix is supposed to be elastic, isotropic and homogeneous, while the cracks are all empty and have the same length and strike direction. An iterative method of calculation of the diffracted wavefield is developed in the case where a large number of cracks are present in order to reduce the computation time. The attenuation factor Q −1 of the direct waves passing through a fractured zone is measured in several frequency bands. We observe that the attenuation factor Q −1 of the direct P wave peaks around kd = 2, where k is the incident wavenumber and d the crack length, and decreases proportionally to ( kd ) −1 in the high-wavenumber range. In the long-wavelength domain, the velocity of the direct P wave measured for two different crack realizations is very close to the value predicted by Hudson's theory on the overall elastic properties of fractured materials.  相似文献   

15.
Summary. Scattering of surface waves by lateral heterogeneities is analysed in the Born approximation. It is assumed that the background medium is either laterally homogeneous, or smoothly varying in the horizontal direction. A dyadic representation of the Green's function simplifies the theory tremendously. Several examples of the theory are presented. The scattering and mode conversion coefficients are shown for scattering of surface waves by the root of an Alpine-like crustal structure. Furthermore a 'great circle theorem'in a plane geometry is derived. A new proof of Snell's law is given for surface wave scattering by a quarter-space. It is shown how a stationary phase approximation can be used to simplify the Fourier synthesis of the scattered wave in the time domain. Finally a procedure is suggested to do 'surface wave holography'.  相似文献   

16.
  相似文献   

17.
It is now widely accepted that elastic properties of the continental lithosphere and the underlying sublithospheric mantle are both anisotropic and laterally heterogeneous at a range of scales. To fully exploit modern three-component broad-band array data sets requires the use of comprehensive modelling tools. In this work, we investigate the use of a wide-angle, one-way wave equation to model variations in teleseismic 3-D waveforms due to 2-D elastic heterogeneity and anisotropy. The one-way operators are derived based on a high-frequency approximation of the square-root operator and include the effects of wave propagation as well as multiple scattering. Computational cost is reduced through a number of physically motivated approximations. We present synthetic results from simple 1-D (layer over a half-space) and 2-D (subduction zone) models that are compared with reference solutions. The algorithm is then used to model data from an array of broad-band seismograph stations deployed in northwestern Canada as part of the IRIS-PASSCAL/LITHOPROBE CANOE experiment. In this region radial-component receiver functions show a clear continental Moho and the presence of crustal material dipping into the mantle at the suture of two Palaeo-Proterozoic terranes. The geometry of the suture is better defined on the transverse component where subduction is associated with a ∼10 km thick layer exhibiting strong elastic anisotropy. The modelling reproduces the main features of the receiver functions, including the effects of anisotropy, heterogeneity and finite-frequency scattering.  相似文献   

18.
This paper presents the development of a 2.5-D simulation technique for acoustic wave propagation in media with variable density and velocity. A comparative study of the 2-D and 2.5-D responses of a model reveals the spatially and temporally damped nature of the 2.5-D acoustic wave equations. The simulated results for constant and variable density models show that the density variation affects only the reflectivity of the layer. The computational cost for variable density models is 2.17 and 2.26 times that for constant density models for the 2.5-D and 2-D cases, respectively. Furthermore, the 2.5-D computational cost in the time domain is only about 10–15 per cent more than that for two dimensions, so this modest increase in computational cost can avoid the exorbitant 3-D computational cost.
Snapshots for a crosshole geometry were computed at various times in order to study the effect of heterogeneity on the amplitude and shape of the wave front. Extensive analysis of an oil-bearing reservoir with and without the inclusion of a gas zone was performed using a point source as well as multiple sources. In addition, the effects of the thickness of a low-velocity layer (oil-bearing) and of the location of the source have been studied. It is concluded from the numerical response that the waveguide action of the low-velocity layer depends on its thickness in terms of the dominant wavelength. Trapping of waves was not observed when the source was outside the low-velocity layer. Furthermore, the presence of heterogeneity in the low-velocity layer contributes considerably to the leakage of energy in the adjacent layers due to scattering/diffraction. It was found that, in the 2.5-D numerical simulation, the stability condition and the requirement of the number of grid points per wavelength to avoid grid dispersion are the same as for the 2-D case.  相似文献   

19.
Wide-angle seismic velocities in heterogeneous crust   总被引：5，自引：0，他引：5  
Seismic velocities measured by wide-angle surveys are commonly used to constrain material composition in the deep crust. Therefore, it is important to understand how these velocities are affected by the presence of multiscale heterogeneities. The effects may be characterised by the scale of the heterogeneity relative to the dominant seismic wavelength (λ); what is clear is that heterogeneities of all scales and strengths bias wide-angle velocities to some degree. Waveform modelling was used to investigate the apparent wide-angle P -wave velocities of different heterogeneous lower crusts. A constant composition (50 per cent felsic and 50 per cent ultramafic) was formed into a variety of 1- and 2-D heterogeneous arrangements and the resulting wide-angle seismic velocity was estimated. Elastic, 1-D models produced the largest velocity shift relative to the true average velocity of the medium (which is the velocity of an isotropic mixture of the two components). Thick (width > λ) horizontal layers, as a result of Fermat's Principle, provided the largest increase in velocity; thin (width ≪λ) vertical layers produced the largest decrease in velocity. Acoustic 2-D algorithms were shown to be inadequate for modelling the kinematics of waves in bodies with multiscale heterogeneities. Elastic, 2-D modelling found velocity shifts (both positive and negative) that were of a smaller magnitude than those produced by 1-D models. The key to the magnitude of the velocity shift appears to be the connectivity of the fast (and/or slow) components. Thus, the models with the highest apparent levels of connectivity between the fast phases, the 1-D layers, produced the highest-magnitude velocity shifts. To understand the relationship between measured seismic velocities and petrology in the deep crust it is clear that high-resolution structural information (which describes such connectivity) must be included in any modelling.  相似文献   

20.
  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号