首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 15 毫秒
1.
The Alhama de Murcia and Crevillente faults in the Betic Cordillera of southeast Spain form part of a network of prominent faults, bounding several of the late Tertiary and Quaternary intermontane basins. Current tectonic interpretations of these basins vary from late‐orogenic extensional structures to a pull‐apart origin associated with strike–slip movements along these prominent faults. A strike–slip origin of the basins, however, seems at variance both with recent structural studies of the underlying Betic basement and with the overall basin and fault geometry. We studied the structure and kinematics of the Alhama de Murcia and Crevillente faults as well as the internal structure of the late Miocene basin sediments, to elucidate possible relationships between the prominent faults and the adjacent basins. The structural data lead to the inevitable conclusion that the late Miocene basins developed as genuinely extensional basins, presumably associated with the thinning and exhumation of the underlying basement at that time. During the late Miocene, neither the Crevillente fault nor the Alhama de Murcia fault acted as strike–slip faults controlling basin development. Instead, parts of the Alhama de Murcia fault initiated as extensional normal faults, and reactivated as contraction faults during the latest Miocene–early Pliocene in response to continued African–European plate convergence. Both prominent faults presently act as reverse faults with a movement sense towards the southeast, which is clearly at variance with the commonly inferred dextral or sinistral strike–slip motions on these faults. We argue that the prominent faults form part of a larger scale zone of post‐Messinian shortening made up of SSE‐ and NNW‐directed reverse faults and NE to ENE‐trending folds including thrust‐related fault‐bend folds and fault‐propagation folds, transected and displaced by, respectively, WNW‐ and NNE‐trending, dextral and sinistral strike–slip (tear or transfer) faults.  相似文献   

2.
《Basin Research》2018,30(Z1):437-451
Many prospective sedimentary basins contain a variety of extrusive volcanic products that are ultimately sourced from volcanoes. However, seismic reflection‐based studies of magmatic rift basins have tended to focus on the underlying magma plumbing system, meaning that the seismic characteristics of volcanoes are not well understood. Additionally, volcanoes have similar morphologies to hydrothermal vents, which are also linked to underlying magmatic intrusions. In this study, we use high resolution 3D seismic and well data from the Bass Basin, offshore southern Australia, to document 34 cone‐ and crater‐type vents of Miocene age. The vents overlie magmatic intrusions and have seismic properties indicative of a volcanic origin: their moderate–high amplitude upper reflections and zones of “wash‐out” and velocity pull‐up beneath. The internal reflections of the vents are similar to those found in lava deltas, suggesting they are composed of volcaniclastic material. This interpretation is corroborated by data from exploration wells which penetrated the flanks of several vents. We infer that the vents we describe are composed of hyaloclastite and pyroclasts produced during submarine volcanic eruptions. The morphology of the vents is typical of monogenetic volcanoes, consistent with the onshore record of volcanism on the southern Australian margin. Based on temporal, spatial and volumetric relationships, we propose that submarine volcanoes can evolve from maars to tuff cones as a result of varying magma‐water interaction efficiency. The morphologies of the volcanoes and their links to the underlying feeder systems are superficially similar to hydrothermal vents. This highlights the need for careful seismic interpretation and characterization of vent structures linked to magmatic intrusions within sedimentary basins.  相似文献   

3.
P. Haughton 《Basin Research》2001,13(2):117-139
ABSTRACT The mechanisms driving subsidence in late orogenic basins are often not easily resolved on account of later fault reactivation and a rapidly changing stress field. Contained turbidites in such basins provide a unique opportunity of monitoring sea bed deformation and evolving bathymetry and hence patterns of subsidence during basin filling. A variety of interpretations have been proposed to explain subsidence in Neogene basins in SE Spain, including extensional, strike‐slip and thrust top mechanisms. Ponded turbidite sheets on the floor of the Neogene Sorbas Basin (SE Spain) were deposited by sand‐bearing currents which ran into enclosed bathymetric deeps where they underwent rapid suspension collapse. The structure and distribution of these sheets (and the thick mudstone caps which overlie them) act as a proxy for the containing sea bed bathymetry at the time of deposition. An analysis of the sheet architecture helps identify a trough‐axial zone of syndepositional faulting and reveals a westwards stepping of the ponding depocentre with time. Fault breaks at the sea bed influenced the position of flow arrest and the distribution of sandstone beds on the basin floor. Westward stepping of the deeper bathymetry was episodic and probably controlled by transverse faults. Re‐locations of the depocentre were accompanied by the destabilization of carbonate sand stores on the margins of the basin, resulting in the repeated emplacement of large‐volume carbonate megabeds and calciturbidites. The fill to the Sorbas Basin was shingled by the onset of compression in the east attributed to transfer of slip between intersecting strike‐slip fault strands. A sinistral fault (a splay of the Carboneras Fault System) propagated through the evolving basin fill from the east as the eastern part of the basin became inverted and the locus of subsidence migrated into the Tabernas area 20 km area to the west. The sedimentological analysis of the basin fill helps see through a late dextral overprint which ultimately juxtaposed basement rocks to the south against the inverted and upended basin, along a late slip‐modified unconformity. Conventional palaeostress analysis of fractures along the basin margin fails to see past this late dextral shearing event. Basin migration parallel to the E–W‐orientated basin axis, slip‐reversal (sinistral to dextral) and the active involvement of strike‐slip faults are now identified as important aspects of the evolution of the Sorbas Basin during the latestTortonian.  相似文献   

4.
The Sagaing Fault zone is the largest active fault in SE Asia, whose current displacement rate of around 1.8 cm year?1 is well‐established from GPS data. Yet determining the timing of initiation and total displacement on the fault zone has proven controversial. The timing problem can potentially be resolved through a newly identified syn‐kinematic sedimentary section directly related to displacement on the Sagaing Fault in the northern Minwun Ranges. The northern part of the western strand of the Sagaing Fault has a releasing splay geometry that sets up a syn‐kinematic oblique‐extensional basin in its hangingwall, here called the North Minwun Basin. A series of thick ridges probably composed of alluvial fan and fluvial sandstones dipping between 20 and 70° to the north, and younging northwards comprise the basin fill over a distance of 40 km. Total stratigraphic thickness (not vertical thickness) is estimated at 25 km. The basin in terms of depositional geometries, large displacements, and large stratigraphic thickness and appearance on satellite images has parallels with the extensional Hornelen basin, Norway and the strike‐slip Ridge Basin, California. Minimum likely displacement on the fault strand is 40 km, and may possibly be in excess of 100 km. The remote and inaccessible basin has yet to be properly dated, likely ages range between Eocene and Miocene. When dated the basin will provide an important constraint on the timing of deformation. The potential for this basin to constrain the timing and displacement along the northern part of the Sagaing Fault has not been previously recognised.  相似文献   

5.
This article focuses on the reinterpretation of well, seismic reflection, magnetic, gravimetric, surface wave and geological surface data, together with the acquisition of seismic noise data to study the Lower Tagus Cenozoic Basin tectono‐sedimentary evolution. For the first time, the structure of the base of the basin in its distal and intermediate sectors is unravelled, which was previously only known in the areas covered by seismic reflection data (distal and small part of intermediate sectors). A complex geometry was found, with three subbasins delimited by NNE‐SSW faults and separated by WNW‐ESE to NW‐SE oriented horsts. In the area covered by seismic reflection data, four horizons were studied: top of the Upper Miocene, Lower to Middle Miocene top, the top of the Palaeogene and the base of Cenozoic. Seismic data show that the major filling of the basin occurred during Upper Miocene. The fault pattern affecting Neogene and Palaeogene units derived here points to that of a polyphasic basin. In the Palaeogene, the Vila Franca de Xira (VFX) and a NNE‐SSW trending previously unknown structure (ABC fault zone) probably acted as the major strike‐slip fault zones of the releasing bend of a pull‐apart basin, which produced a WNW‐ESE to NW‐SE fault system with transtensional kinematic. During the Neogene, as the stress regime rotated anticlockwise to the present NW‐SE to WNW‐ESE orientation, the VFX and Azambuja fault zones acted as the major transpressive fault zones and Mesozoic rocks overthrusted Miocene sediments. The reactivation of WNW‐ESE to NW‐SE fault systems with a dextral strike‐slip component generated a series of horsts and grabens and the partitioning of the basin into several subbasins. Therefore, we propose a polyphasic model for the area, with the formation of an early pull‐apart basin during the Palaeogene caused by an Iberia–Eurasia plates collision that later evolved into an incipient foreland basin along the Neogene due to a NW‐SE to WNE‐ESE oriented Iberia–Nubia convergence. This convergence is producing uplift in the area since the Quaternary except for the Tagus estuary subbasin around the VFX fault, where subsidence is observed. This may be due to the locking or the development of a larger component of strike‐slip movement of the NNE‐SSW to N‐S thrust fault system with the exception of the VFX fault, which is more favourably oriented to the maximum compressive stress.  相似文献   

6.
The Turkana rifted zone in northern Kenya is a long‐lived and polyphased rift system where the lack of well‐marked rift morphology makes it difficult to identify the zone of active deformation. A high‐density river network is exceptionally well developed over the study area and shows evidence of drainage anomalies that suggest recent fault‐induced movements at various scales. Correlation of surface drainage anomalies with Landsat remote sensing and deep seismic reflection data permits to characterize the deep geometry of the inferred fault structures. Seismic stratigraphy further allows distinction between the inherited (Oligocene–Pliocene) and the newly formed (<3.7 Ma) origin of the recent deformation. Evidence for neotectonics are observed (1) along a large‐scale transverse (EW) fault rooted at depth along a steep basement discontinuity (Turkwell), (2) along a rift‐parallel (NS) fault zone probably emplaced during the Pliocene–Pleistocene and currently bounding the Napedet volcanic plateau to the west and (3) over a round‐shaped uplifted zone caused by positive inversion tectonics (Kalabata). The major contribution of this work is the recognition of a broad (80 km wide) zone of recent/active extensional deformation in the Turkana Rift in contrast with the narrow (20 km wide) N10°E‐trending axial trough forming the Suguta valley to the south, and the Chew Bahir faulted basin to the north. These along‐strike variations in structural style are partly controlled by the occurrence of rejuvenated Oligocene–Miocene rift faults and long‐lived transverse discontinuities in the Turkana Rift area. More generally, this study has implications for the use of river drainage network about recent/active extensional domains with subdued topography and slow deformation rate.  相似文献   

7.
A series of analogue models are used to demonstrate how the multistage development of the Mid‐Polish Trough (MPT) could have been influenced by oblique basement strike–slip faults. Based on reinterpretation of palaeothickness, facies maps and published syntheses of the basin development, the following successive stages in the Mesozoic history of the south eastern part of the MPT were simulated in the models: (1) Oblique extension of the NW segment of the MPT connected with sinistral movement along the Holy Cross Fault (HCF, Early Triassic–latest Early Jurassic). (2) Oblique extension of both NW and SE segment of the MPT, parallel to the HCF (latest Early and Middle Jurassic). (3) Oblique extension of the SE segment of the MPT and much lesser extension of its NW segment connected with dextral movement along the HCF (Early Oxfordian–latest Early Kimmeridgian). (4) Oblique extension of the SE segment of the MPT and much lesser extension of its NW segment connected with dextral movement along the Zawiercie Fault (ZF, latest Early Kimmeridgian–Early Albian). (5) Oblique inversion of the NW segment of the MPT connected with dextral movement along the HCF (Early Albian–latest Cretaceous). (6) Oblique inversion of the SE segment of the MPT along the W–E direction (latest Cretaceous–Palaeogene). The different sense of movements of these two basement strike–slip faults (HCF and ZF) resulted in distinct segmentation of the basin and its SW margin by successive systems of extensional en‐echelon faults. The overall structure of this margin is controlled by the interference of the border normal faults with the en‐echelon fault systems related to successive stages of movement along the oblique strike–slip faults. This type of en‐echelon fault system is absent in the opposite NE‐margin of the basin, which was not affected by oblique strike–slip faults. The NE‐margin of the basin is outlined by a typical, steep and distinctly marked rift margin fault zone, dominated by normal and dip–slip/strike–slip faults parallel to its axis. Within the more extended segment of the basin, extensive intra‐rift faults and relay ramps develop, which produce topographic highs running across the basin. The change in the extension direction to less oblique relative to the basin axis resulted in restructuring of the fault systems. This change caused shifting of the basin depocentre to this margin. Diachronous inversion of the different segments of the basin in connection with movement along one of the oblique basement strike–slip faults resulted in formation of a pull‐apart sub‐basin in the uninverted SE‐segment of the basin. The results of the analogue models presented here inspire an overall kinematic model for the southeastern segment of the MPT as they provide a good explanation of the observed structures and the changes in the facies and palaeothickness patterns.  相似文献   

8.
The Plataforma Burgalesa is a partly exposed extensional forced fold system with an intermediate salt layer, which has developed along the southern portion of the Basque‐Cantabrian Basin from Malm to Early Cretaceous as part of the Bay of Biscay‐Pyrenean rift system. Relationships between syn‐ and pre‐rift strata of the supra‐salt cover sequence and distribution of intra‐cover second‐order faults are observed both along seismic sections and at the surface. These relationships indicate an along‐strike variability of the extensional structural style. After a short period of salt mobilization and forced folding, high slip rates in the central portion of the major basement faults have rapidly promoted brittle behaviour of the salt layer, preventing further salt mobilization and facilitating the propagation of the fault across the salt layer. In contrast, at the tip regions of basement faults, slower slip rates have facilitated ductile salt behaviour, ensuring its further evaporite evacuation, preventing fault propagation across the salt layer and, in essence, allowing for a long‐living forced folding process. Our results indicate the important effect of along‐strike variation in displacement and displacement rates in controlling evaporite behaviour in extensional basins. Amount of displacement and displacement rates are key factors controlling the propagation of basement faults across evaporite layers. In addition, growth strata patterns are recognized as a powerful tool for constraining the up‐dip propagation history of basement faults in extensional fault‐related fold systems with intermediate décollement levels.  相似文献   

9.
An efficient high‐resolution (HR) three‐dimensional (3D) seismic reflection system for small‐scale targets in lacustrine settings was developed. In Lake Geneva, near the city of Lausanne, Switzerland, the offshore extension of a complex fault zone well mapped on land was chosen for testing our system. A preliminary two‐dimensional seismic survey indicated structures that include a thin (<40 m) layer of subhorizontal Quaternary sediments that unconformably overlie south‐east‐dipping Tertiary Molasse beds and a major fault zone (Paudèze Fault Zone) that separates Plateau and Subalpine Molasse (SM) units. A 3D survey was conducted over this test site using a newly developed three‐streamer system. It provided high‐quality data with a penetration to depths of 300 m below the water bottom of non‐aliased signal for dips up to 30° and with a maximum vertical resolution of 1.1 m. The data were subjected to a conventional 3D processing sequence that included post‐stack time migration. Tests with 3D pre‐stack depth migration showed that such techniques can be applied to HR seismic surveys. Delineation of several horizons and fault surfaces reveals the potential for small‐scale geologic and tectonic interpretation in three dimensions. Five major seismic facies and their detailed 3D geometries can be distinguished. Three fault surfaces and the top of a molasse surface were mapped in 3D. Analysis of the geometry of these surfaces and their relative orientation suggests that pre‐existing structures within the Plateau Molasse (PM) unit influenced later faulting between the Plateau and SM. In particular, a change in strike of the PM bed dip may indicate a fold formed by a regional stress regime, the orientation of which was different from the one responsible for the creation of the Paudèze Fault Zone. This structure might have later influenced the local stress regime and caused the curved shape of the Paudèze Fault in our surveyed area.  相似文献   

10.
Submarine magmatism and associated hydrothermal fluid flows has significant feedback influence on the petroleum geology of sedimentary basins. This study uses new seismic profiles and multibeam bathymetric data to examine the morphology and internal architecture of post‐seafloor spreading magmatic structures, especially volcanoes of the Xisha uplift, in extensive detail. We discover for the first time hydrothermal systems derived from magmatism in the northwestern South China Sea. Numerous solitary volcanoes and volcanic groups occur in the Xisha uplift and produce distinct seismic reflections together with plutons. Sills and other localized amplitude anomalies were fed by extrusions/intrusions and associated fluid flow through fractures and sedimentary layers that may act as conduits for magma and fluid flows transport. Hydrothermal structures such as pipes and pockmarks mainly occur in the proximity of volcanoes or accompany volcanic groups. Pipes, pockmarks and localized amplitude anomalies mainly constitute the magmatic hydrothermal systems, which are probably driven by post‐seafloor spreading volcanoes/plutons. The hydrothermal fluid flows released by magma degassing or/and related boiling of pore fluids/metamorphic dehydration reactions in sediments produced local overpressures, which drove upward flow of fluid or horizontal flow into the sediments or even seafloor. Results show that post‐seafloor spreading magmatic activity is more intense during a 5.5 Ma event than one in 2.6 Ma, whereas the hydrothermal activities are more active during 2.6 Ma than in 5.5 Ma. Our analysis indicates that post‐seafloor spreading magmatism may have a significant effect on hydrocarbon maturation and gas hydrate formation in the Xisha uplift and adjacent petroliferous basins. Consequently the study presented here improves our understanding of hydrocarbon exploration in the northwestern South China Sea.  相似文献   

11.
In areas of broadly distributed extensional strain, the back‐tilted edges of a wider than normal horst block may create a synclinal‐horst basin. Three Neogene synclinal‐horst basins are described from the southern Rio Grande rift and southern Transition Zone of southwestern New Mexico, USA. The late Miocene–Quaternary Uvas Valley basin developed between two fault blocks that dip 6–8° toward one another. Containing a maximum of 200 m of sediment, the Uvas Valley basin has a nearly symmetrical distribution of sediment thickness and appears to have been hydrologically closed throughout its history. The Miocene Gila Wilderness synclinal‐horst basin is bordered on three sides by gently tilted (10°, 15°, 20°) fault blocks. Despite evidence of an axial drainage that may have exited the northern edge of the basin, 200–300 m of sediment accumulated in the basin, probably as a result of high sediment yields from the large, high‐relief catchments. The Jornada del Muerto synclinal‐horst basin is positioned between the east‐tilted Caballo and west‐tilted San Andres fault blocks. Despite uplift and probable tilting of the adjacent fault blocks in the latest Oligocene and Miocene time, sediment was transported off the horst and deposited in an adjacent basin to the south. Sediment only began to accumulate in the Jornada del Muerto basin in Pliocene and Quaternary time, when an east‐dipping normal fault along the axis of the syncline created a small half graben. Overall, synclinal‐horst basins are rare, because horsts wide enough to develop broad synclines are uncommon in extensional terrains. Synclinal‐horst basins may be most common along the margins of extensional terrains, where thicker, colder crust results in wider fault spacing.  相似文献   

12.
昌马断裂带活动构造地貌之研究   总被引：4，自引：0，他引：4  
康来迅 《地理研究》1989,8(2):35-43
本文根据野外地质调查资料和人工探槽的剖折,并结合14C年龄数据,讨论了昌马活动断裂带晚更新世晚期以来形成的构造地貌的类型、特征及分期问题.  相似文献   

13.
《Basin Research》2018,30(5):942-964
Mass wasting is triggered on many continental slopes by a number of mechanisms, including seismic shaking, high sedimentation rates, the presence of weak geological units and gas hydrate dissociation. In this study, the morphology of a Late Miocene–Early Pliocene mass‐transport complex (MTC) on the Utgard High is unravelled and discussed in relation to possible trigger mechanisms. The approach used here includes 3D seismic interpretation and the analysis of variance attribute maps. The interpreted MTC is located on the crest and flanks of the Utgard High and is composed of three mass‐transport deposits with seismic characters varying from transparent and chaotic seismic facies at the base to slightly deformed layers composed of mounds and rafted blocks in the middle and chaotic to transparent reflections at the top. Lithologically, the MTC consists predominantly of claystone with high gamma ray and low density and resistivity values, demonstrating that the associated mounds represent remobilized ooze sediments. A vertical stack of six magmatic sills emplaced from 55.6 to 56.3 Ma into the Upper Cretaceous shales is interpreted at depths of 3,000–5,500 ms two‐way travel time (TWTT). In association with these magmatic sills are several hydrothermal vent complexes that interacted with the top MTC horizon, signifying that episodic and secondary fluid‐venting events might be the principal mechanism facilitating mass wasting in the study area. In addition, the remobilization of ooze sediments into mounds is hypothesized to be dependent on fluids and clayey layers. As a corollary of this work, the importance of relict and recurrent episodes of fluid flow in the Vøring Basin and their influence on the geotechnical integrity of the overburden and later mass wasting is established.  相似文献   

14.
Rift basin tectono‐stratigraphic models indicate that normal fault growth controls the sedimentology and stratigraphic architecture of syn‐rift deposits. However, such models have rarely been tested by observations from natural examples and thus remain largely conceptual. In this study we integrate 3D seismic reflection, and biostratigraphically constrained core and wireline log data from the Vingleia Fault Complex, Halten Terrace, offshore Mid‐Norway to test rift basin tectono‐stratigraphic models. The geometry of the basin‐bounding fault and its hangingwall, and the syn‐rift stratal architecture, vary along strike. The fault is planar along a much of its length, bounding a half‐graben containing a faultward‐thickening syn‐rift wedge. Locally, however, the fault has a ramp‐flat‐ramp geometry, with the hangingwall defined by a fault‐parallel anticline‐syncline pair. Here, an unusual bipartite syn‐rift architecture is observed, comprising a lower faultward‐expanding and an upper faultward‐thinning wedge. Fine‐grained basinfloor deposits dominate the syn‐rift succession, although isolated coarse clastics occur. The spatial and temporal distribution of these coarse clastics is complex due to syn‐depositional movement on the Vingleia Fault Complex. High rates of accommodation generation in the fault hangingwall led to aggradational stacking of fan deltas that rapidly (<5 km) pinch out basinward into offshore mudstone. In the south of the basin, rapid strain localization meant that relay ramps were short‐lived and did not represent major, long‐lived sediment entry points. In contrast, in the north, strain localization occurred later in the rift event, thus progradational shorefaces developed and persisted for a relatively long time in relay ramps developed between unlinked fault segments. The footwall of the Vingleia Fault Complex was characterized by relatively low rates of accommodation generation, with relatively thin, progradational hangingwall shorelines developed downdip of the fault block apex, sometime after the onset of sediment supply to the hangingwall. We show that rift basin tectono‐stratigraphic models need modifying to take into account along‐strike variability in fault structure and basin physiography, and the timing and style of syn‐rift sediment dispersal and facies, in both hangingwall and footwall locations.  相似文献   

15.
Along‐strike structural linkage and interaction between faults is common in various compressional settings worldwide. Understanding the kinematic history of fault interaction processes can provide important constraints on the geometry and evolution of the lateral growth of segmented faults in the fold‐and‐thrust belts, which are important to seismic hazard assessment and hydrocarbon trap development. In this study, we study lateral structural geometry (fault displacement and horizon shortening) of thrust fault linkages and interactions along the Qiongxi anticline in the western Sichuan foreland basin, China, using a high‐resolution 3D seismic reflection dataset. Seismic interpretation suggests that the Qiongxi anticline can be related to three west‐dipping, hard‐linked thrust fault segments that sole onto a regional shallow detachment. Results reveal that the lateral linkage of fault segments limited their development, affecting the along‐strike fault displacement distributions. A deficit between shortening and displacement is observed to increase in linkage zones where complex structural processes occur, such as fault surface bifurcation and secondary faulting, demonstrating the effect of fault linkage process on structural deformation within a thrust array. The distribution of the geometrical characteristics shows that thrust fault development in the area can be described by both the isolated fault model and the coherent fault model. Our measurements show that new fault surfaces bifurcate from the main thrust ramp, which influences both strain distribution in the relay zone and along‐strike fault slip distribution. This work fully describes the geometric and kinematic characteristics of lateral thrust fault linkage, and may provide insights into seismic interpretation strategies in other complex fault transfer zones.  相似文献   

16.
The thickness and distribution of early syn‐rift deposits record the evolution of structures accommodating the earliest phases of continental extension. However, our understanding of the detailed tectono‐sedimentary evolution of these deposits is poor, because in the subsurface, they are often deeply buried and below seismic resolution and sparsely sampled by borehole data. Furthermore, early syn‐rift deposits are typically poorly exposed in the field, being buried beneath thick, late syn‐rift and post‐rift deposits. To improve our understanding of the tectono‐sedimentary development of early syn‐rift strata during the initial stages of rifting, we examined quasi‐3D exposures in the Abura Graben, Suez Rift, Egypt. During the earliest stage of extension, forced folding above blind normal fault segments, rather than half‐graben formation adjacent to surface‐breaking faults, controlled rift physiography, accommodation development and the stratigraphic architecture of non‐marine, early syn‐rift deposits. Fluvial systems incised into underlying pre‐rift deposits and were structurally focused in the axis of the embryonic depocentre, which, at this time, was characterized by a fold‐bound syncline rather than a fault‐bound half graben. During this earliest phase of extension, sediment was sourced from the rift shoulder some 3 km to the NE of the depocentre, rather than from the crests of the flanking, intra‐basin extensional forced folds. Fault‐driven subsidence, perhaps augmented by a eustatic sea‐level rise, resulted in basin deepening and the deposition of a series of fluvial‐dominated mouth bars, which, like the preceding fluvial systems, were structurally pinned within the axis of the growing depocentre, which was still bound by extensional forced folds rather than faults. The extensional forced folds were eventually locally breached by surface‐breaking faults, resulting in the establishment of a half graben, basin deepening and the deposition of shallow marine sandstone and fan‐delta conglomerates. Because growth folding and faulting were coeval along‐strike, syn‐rift stratal units deposited at this time show a highly variable along‐strike stratigraphic architecture, locally thinning towards the growth fold but, only a few kilometres along‐strike, thickening towards the surface‐breaking fault. Despite displaying the classic early syn‐rift stratigraphic motif recording net upward‐deepening, extensional forced folding rather than surface faulting played a key role in controlling basin physiography, accommodation development, and syn‐rift stratal architecture and facies development during the early stages of extension. This structural and stratigraphic observations required to make this interpretation are relatively subtle and may go unrecognized in low‐resolution subsurface data sets.  相似文献   

17.
ABSTRACT Geological mapping and sedimentological investigations in the Guilin region, South China, have revealed a spindle‐ to rhomb‐shaped basin filled with Devonian shallow‐ to deep‐water carbonates. This Yangshuo Basin is interpreted as a pull‐apart basin created through secondary, synthetic strike‐slip faulting induced by major NNE–SSW‐trending, sinistral strike‐slip fault zones. These fault zones were initially reactivated along intracontinental basement faults in the course of northward migration of the South China continent. The nearly N–S‐trending margins of the Yangshuo Basin, approximately coinciding with the strike of regional fault zones, were related to the master strike‐slip faults; the NW–SE‐trending margins were related to parallel, oblique‐slip extensional faults. Nine depositional sequences recognized in Givetian through Frasnian strata can be grouped into three sequence sets (Sequences 1–2, 3–5 and 6–9), reflecting three major phases of basin evolution. During basin nucleation, most basin margins were dominated by stromatoporoid biostromes and bioherms, upon a low‐gradient shelf. Only at the steep, fault‐controlled, eastern margin were thick stromatoporoid reefs developed. The subsequent progressive offset and pull‐apart of the master strike‐slip faults during the late Givetian intensified the differential subsidence and produced a spindle‐shaped basin. The accelerated subsidence of the basin centre led to sediment starvation, reduced current circulation and increased environmental stress, leading to the extensive development of microbial buildups on platform margins and laminites in the basin centre. Stromatoporoid reefs only survived along the windward, eastern margin for a short time. The architectures of the basin margins varied from aggradation (or slightly backstepping) in windward positions (eastern and northern margins) to moderate progradation in leeward positions. A relay ramp was present in the north‐west corner between the northern oblique fault zone and the proximal part of the western master fault. In the latest Givetian (corresponding to the top of Sequence 5), a sudden subsidence of the basin induced by further offset of the strike‐slip faults was accompanied by the rapid uplift of surrounding carbonate platforms, causing considerable platform‐margin collapse, slope erosion, basin deepening and the demise of the microbialites. Afterwards, stromatoporoid reefs were only locally restored on topographic highs along the windward margin. However, a subsequent, more intense basin subsidence in the early Frasnian (top of Sequence 6), which was accompanied by a further sharp uplift of platforms, caused more profound slope erosion and platform backstepping. Poor circulation and oxygen‐depleted waters in the now much deeper basin centre led to the deposition of chert, with silica supplied by hydrothermal fluids through deep‐seated faults. Two ‘subdeeps’ were diagonally arranged in the distal parts of the master faults, and the relay ramp was destroyed. At this time, all basin margins except the western one evolved into erosional types with gullies through which granular platform sediments were transported by gravity flows to the basin. This situation persisted into the latest Frasnian. This case history shows that the carbonate platform architecture and evolution in a pull‐apart basin were not only strongly controlled by the tectonic activity, but also influenced by the oceanographic setting (i.e. windward vs. leeward) and environmental factors.  相似文献   

18.
本文对在南极长城站区附近活动的6科11种鸟类的数量、分布、繁殖、行为、栖息环境等作了比较详细的报道。作者认为:(1)在长城站区附近分布的鸟类全为肉食性种类;(2)企鹅在整个食物链中占有非常重要的作用;(3)亲鸟的护幼行为较强;(4)所观察到的鸟类全为早成或半早成鸟,但亲鸟育雏期又都较长,这是一种特殊习性。  相似文献   

19.
The spatial and temporal organization of depositional environments in drainage networks of foreland basins reflect the tectonic and erosional dynamics associated with the development of mountain belts. We provide field evidences for the initiation and evolution of a complex drainage system in the French South Alpine Foreland Basin related to Western Alps exhumation. Sedimentological and structural analyses of the Eocene–Early Miocene succession were investigated in the (1) Argens/Peyresq, (2) Barrême/Blieux/Taulanne and (3) Montmaur/St‐Disdier sectors. Combined with the existing structural data set, we propose a new model that integrates the regional tectonic activity, the palaeovalley orientation and their dynamics through time. The Eocene–Miocene deposits clearly show the existence of N–S‐oriented palaeovalleys. The systematic presence of early NE–SW‐ to N–S‐oriented strike‐slip and extensional faults in the palaeovalleys suggests that these tectonic structures were responsible for the formation of the initial N–S‐oriented basin‐floor topographies. The vertical offset of the strike‐slip faults induced sufficient accommodation space for the Cenozoic sedimentation since the Middle Eocene. It implies the creation of N–S‐oriented palaeovalleys during the northward Pyrenean‐Provençal phase, pre‐dating westward Alpine compression. Later, the Oligocene Alpine tectonic phase induced drainage expansion toward the orogenic wedge and the erosion of the exhumed internal massifs by transverse streams. The establishment of new connections between the old topographic lows formed a longitudinal drainage pattern that remains the locus of deposition in a regional sedimentary routing system. In this model, former strike‐slip faults correspond to weakness zones overprinted by the westward Alpine shortening that allowed the formation of the modern piggyback basin structure of the foreland and the long‐time preservation of the palaeovalley geometry.  相似文献   

20.
This paper investigates the tectono‐stratigraphic development of a major, segmented rift border fault (Thal Fault) during ca. 6 Myr of initial rifting in the Suez Rift, Egypt. The Thal Fault is interpreted to have evolved by the progressive linkage of at least four fault segments. We focus on two contrasting structural settings in its hangingwall: Gushea, towards the northern tip of the fault, and Musaba Salaama, ca. 20 km along‐strike to the south, towards the centre of the fault. The early syn‐rift stratigraphic succession passes upwards from continental facies, through a condensed marginal marine shell‐rich facies, into fully marine shoreface sandstone and offshore mudstone. Regionally correlatable stratal surfaces within this succession define time‐equivalent stratal units that exhibit considerable along‐strike variability in thickness and facies architecture. During the initial ca. 6 Myr of rifting, the thickest stratigraphy developed towards the centre of the array of fault segments that subsequently hard linked to form the Thal Fault. Thus, a displacement gradient existed between fault segments at the centre and tip of the fault array, suggesting that the fault segments interacted, and a fixed length was established for the fault array, at an early stage in rifting. Towards the centre of the Thal Fault the early syn‐rift succession shows pronounced thickening away from the fault and towards a series of intra‐block antithetic faults that were active for up to ca. 6 Myr. This indicates that a large proportion of fault‐controlled subsidence during the initial ca. 6 Myr of rifting occurred in the hangingwalls of antithetic intra‐block faults, and not the present‐day Thal Fault. The antithetic faults progressively switched off during rifting such that after ca. 6 Myr of rifting, fault‐activity had localised on the Thal Fault enabling it to accrue to the present‐day high level of displacement. Aspects of the development of the Thal Fault appear to be in contrast to many models of fault evolution that predict large‐displacement rift‐climax faults to have always had the greatest displacement during fault population evolution. This study has implications for tectono‐stratigraphic development during early rift basin evolution. In particular, we stress that caution must be taken when relating final rift‐climax fault structure to the early tectono‐stratigraphy, as these may differ considerably.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号