首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
Utilizing two outcrop data sets with dip direction exposures of shallow-water (tens of meters) deltaic clinoforms, this paper quantifies sedimentary facies proportions and clinoform lengths and gradients, and links process regimes to delta clinoform dimensions. Both data sets are from foreland basins, the Cretaceous Chimney Rock Sandstone of the Rock Springs Formation from the US Western Interior, and the Eocene Brogniartfjellet Clinoform Complex 8 of the Battfjellet Formation from the Central Basin of Spitsbergen. Sedimentary facies indicate presence of both river- and wave-dominated clinothems in each data set. Facies characteristics and distribution implies that river-dominated clinothem progradation was primarily driven by deposition from weak hyperpycnal flow turbidity currents across the clinoforms, and minor slumps. Wave-dominated clinothems were constructed by wave processes rather than alongshore currents, and are also progradational subaerial clinoforms, with one exception, where the formation of a compound subaqueous clinoform set indicates erosion and sediment bypass above the wave base. Sediment distribution and lithological heterogeneity in the river-dominated clinothems is controlled by individual hyperpycnal flow events or mouth-bar collapse events, and thus by self-organization and minimal reworking that results in a heterogeneity that is difficult to predict (high entropy). The efficient reworking of river-derived sediments in wave-dominated clinothems results in predictable lithological sediment partitioning (low entropy). Clinoform dimension analyses show that although of similar sediment caliber, river-dominated clinoforms in both data sets are on average 3–4 times steeper and 3–4 times shorter than the wave-dominated clinoforms, with mean gradients of ca 4 degrees and ca 1 degree, respectively, and mean lengths of 150–230 m and 640–760 m. These results require corroboration from additional data sets, but do suggest that river- and wave-dominated delta clinoforms are likely to have distinct downdip extents (lengths) and gradients for given clinoform heights. Clinoform shape can thus be a method for differentiating ancient river- vs. wave-dominated deltaic clinoforms, in addition to their sedimentary facies, biogenic features and sandstone maturity, and helpful when incorporated into reservoir models.  相似文献   

2.
Lacustrine basins and their deposits are good paleoclimate recorders and contain rich energy resources. Shelf-margin clinoforms do exist in deep lacustrine basins, but with striking differences from those in deep marine basins, caused by a correlation between the river-derived sediment supply and the lake level. This study uses empirical relationships to calculate the water and sediment discharge from rivers and coeval lake level during wet–dry cycles at 10 s of ky time scale. Sediment supply and lake-level changes are used for a stratigraphic forward model to understand how lacustrine clinoforms develop under different climate conditions. The results show that both wet and dry cycles can be associated with thick deep-water fan deposits, supporting the existing climate-driven lacustrine model proposed based on field data (e.g. Neogene Pannonian Basin and Eocene Uinta Basin). The wet period with high sediment supply and rising lake level creates the highly aggradational shelf, progradational slope and thick bottomset deposits. This is contrary from marine basin settings where the presence of rising shelf-margin trajectory commonly indicates limited deep-water fan deposits. This work suggests marine-based stratigraphic models cannot be directly applied to lacustrine basins.  相似文献   

3.
This paper presents an overview of some of the most significant, recent to ancient, littoral morpho-sedimentary structures and deposits from the Lake Turkana Basin. We highlight the importance of wave-related sedimentary processes in lakes, and more specifically in rift lakes. In the published literature, references to wave-dominated shorelines are mainly in regards to coastal marine environments. However, numerous modern lakes exhibit typical wave-dominated littoral landforms, and related sedimentary deposits are known from several paleolake successions in the geological record. Wave-related processes are often of relatively minor importance in depositional models for lacustrine environments. Classical models emphasize clastics transported by rivers, which are then distributed by fan-deltas and/or deltas into a water body of fluctuating depth, where reworking of clastics is limited in the littoral domain, and episodic in deep waters. Modern processes in Lake Turkana and the exposed paleolake deposits of the Turkana Basin demonstrate that this view is incomplete. Wave-dominated shorelines are evident (1) for modern Lake Turkana based on prominent and active littoral landforms (e.g., beach ridges, sand spits, washover fans, and arcuate-cuspate deltas); (2) for the Holocene (African Humid Period) climate-driven highstand of Megalake Turkana and its subsequent forced regression based on conspicuous raised beach ridges and spits; and (3) for the Pliocene–Pleistocene (Omo Group, Nachukui Formation) from typical nearshore sedimentary facies and stratigraphic architectures associated with paleolake Turkana. These examples from the Turkana Basin coupled with examples from other lacustrine settings, suggest that wave-dominated clastic shorelines represent significant portions of existing and ancient lake-shores. As this view contrasts with classic depositional models for lakes, notably for those found in rift setting, we also present examples of wave-influenced littoral landforms from other lakes of the East African Rift System. Identifying lacustrine paleoshorelines from typical clastic landforms and deposits is the key to the spatial reconstruction of lakes over time, and to determine transgressive–regressive cycles. Waves action is an important agent in lakes for the erosion, transport, and deposition of clastics at the basin-scale, an aspect that needs to be integrated in sedimentary models.  相似文献   

4.
Two nested clinoform set types of different scales and steepness are mapped and analysed from high-resolution seismic data. Restoration of post-depositional faulting reveals a persistent pattern of small-scale, high-angle clinoforms contained within platform-scale, low-angle clinothems, showing a combined overall progradational depositional system. The large clinoforms lack a well-defined platform edge, and show a gradual increase in dip from topset to foreset. A consistent recurring stratal pattern is evident from the architecture, and is considered a result of interplay between relative sea-level change and autocyclic switching of sediment delivery focal points that brought sediment to the platform edge. This un-interrupted succession records how intra-shelf platforms prograde. Quantitative clinoform analysis may assist in determining the most influential depositional factors. Post-depositional uplift and erosion requires restoration with re-burial to maximum burial depth. Backstripping, decompaction and isostatic correction was performed assuming a range of lithologic compositions, as no wells test the lithology. Nearby wells penetrate strata basinward of the clinoforms, proving mudstone content above 50%, which in turn guide restoration values. Typical restored platform heights are 250–300 m, with correspondingly sized platform-scale clinoform heights. Typical large-scale clinoform foreset dip values are 1.3°–2.4°. Small-scale clinothems are typically 100 m thick, with restored foreset dip angles at 4.4° - > 10°. The results suggest that intrashelf platform growth occurs in pulses interrupted by draping of strata over its clinoform profile. The resultant architecture comprises small-scale clinoforms nested within platform-scale clinothems.  相似文献   

5.
Evolution of the late Cenozoic Chaco foreland basin, Southern Bolivia   总被引：3，自引：1，他引：3  
Eastward Andean orogenic growth since the late Oligocene led to variable crustal loading, flexural subsidence and foreland basin sedimentation in the Chaco basin. To understand the interaction between Andean tectonics and contemporaneous foreland development, we analyse stratigraphic, sedimentologic and seismic data from the Subandean Belt and the Chaco Basin. The structural features provide a mechanism for transferring zones of deposition, subsidence and uplift. These can be reconstructed based on regional distribution of clastic sequences. Isopach maps, combined with sedimentary architecture analysis, establish systematic thickness variations, facies changes and depositional styles. The foreland basin consists of five stratigraphic successions controlled by Andean orogenic episodes and climate: (1) the foreland basin sequence commences between ～27 and 14 Ma with the regionally unconformable, thin, easterly sourced fluvial Petaca strata. It represents a significant time interval of low sediment accumulation in a forebulge‐backbulge depocentre. (2) The overlying ～14–7 Ma‐old Yecua Formation, deposited in marine, fluvial and lacustrine settings, represents increased subsidence rates from thrust‐belt loading outpacing sedimentation rates. It marks the onset of active deformation and the underfilled stage of the foreland basin in a distal foredeep. (3) The overlying ～7–6 Ma‐old, westerly sourced Tariquia Formation indicates a relatively high accommodation and sediment supply concomitant with the onset of deposition of Andean‐derived sediment in the medial‐foredeep depocentre on a distal fluvial megafan. Progradation of syntectonic, wedge‐shaped, westerly sourced, thickening‐ and coarsening‐upward clastics of the (4) ～6–2.1 Ma‐old Guandacay and (5) ～2.1 Ma‐to‐Recent Emborozú Formations represent the propagation of the deformation front in the present Subandean Zone, thereby indicating selective trapping of coarse sediments in the proximal foredeep and wedge‐top depocentres, respectively. Overall, the late Cenozoic stratigraphic intervals record the easterly propagation of the deformation front and foreland depocentre in response to loading and flexure by the growing Intra‐ and Subandean fold‐and‐thrust belt.  相似文献   

6.
Sandy clinothems are of interest as hydrocarbon reservoirs but there is no proven, economic, clinothem reservoir in the Norwegian Barents Sea. We used high-resolution, 2D and 3D seismic, including proprietary data, to identify a previously untested, Barremian, clinoform wedge in the Fingerdjupet Subbasin (FSB). Data from recent well 7322/7-1 plus seismic have been used to characterize this wedge and older Lower Cretaceous clinoforms in the FSB. In the latest Hauterivian – early Barremian, during post-rift tectonic quiescence, shelf-edge clinoforms (foreset height > 150 m) prograded into an under-filled basin. Increased sediment input was related to regional uplift of the hinterland (northern Barents Shelf). Early Barremian erosion in the north-western FSB and mass wasting towards the SE were followed by deposition of delta-scale (<80 m high), high-angle (c. 8°) clinoform sets seaward of older shelf-edge clinoforms. This may be the local expression of a regional, early Barremian, regressive event. By the close of the Barremian, clinoforms had prograded, within a narrow, elongate basin, across the FSB and towards the uplifted Loppa High. A seismic wedge of high-angle (10–12°), low-relief, delta-scale (25–80 m) clinoform sets occurs between shelf-edge clinoforms to the NW and the uplifted area to the SE. Well 7322/7-1, positioned on a direct hydrocarbon indicator, <1 km NNW of the high-angle, low-relief, delta-scale clinoforms, found upward coarsening siltstone-cycles linked to relative sea-level fluctuations on a marine shelf. Sand may have accumulated, offshore from the well, in high-angle, low-relief foresets of the delta-scale clinothems (which are typical geometries elsewhere interpreted as ‘delta-scale, sand-prone subaqueous clinoforms’). Deposition was controlled by the paleosurface, storms and longshore currents on an otherwise mud-dominated shelf. The study highlights challenges associated with exploration for sandstone reservoirs in seismic wedges on an outer shelf.  相似文献   

7.
《Basin Research》2018,30(3):480-501
Understanding ancient deep‐water sedimentary systems that accumulated at complex plate boundaries requires confronting the stratigraphic record of deformed sedimentary successions by tracking sand‐fairways and identifying original relationships in later deformed sequences. Here, we investigate the Numidian turbidite system (early to mid‐Miocene) of Central‐East Sicily to explore a deep‐water sedimentary system deposited at an active thrust belt on the Central Mediterranean. Turbidites include multi‐metre thick‐bedded, ultra‐mature quartz sandstones that were sourced from North Africa and are now deformed and dismembered within the Apennine‐Maghrebian orogen. To date, much research has focused on the little‐deformed sections that sample discrete parts of the original turbidite pathways. Yet the bulk of these systems are represented by deformed successions and these have attracted little modern sedimentological and stratigraphic investigation. We present new data based on field mapping, sedimentological/structural fieldwork, and biostratigraphy (planktonic foraminifera and nannofossils) that focus on the Numidian turbidites of Central‐East Sicily. Thickness and facies variations, together with evidence of large‐scale sediment bypass and local substrate reworking, characterize the Numidian turbidites of the study area, consistent with a partially confined turbidite system. Our work demonstrates that the Numidian turbidite system accumulated across active structures and these provided tortuous, evolving corridors through which turbidity currents were routed, transporting coarse sand over many hundreds of km. These results provide insight on structurally confined turbidites in analogous tectonic settings and demonstrate the need to seek sedimentological and stratigraphic data from deformed and dismembered parts of deep‐water systems.  相似文献   

8.
Sediment supply rate and accommodation regime represent primary controls on the depositional architecture of basin margin successions, but their interaction is commonly inferred from 2D dip profiles and/or with limited constraints on sedimentary facies. In this study, three parallel (>40 km long) 2D depositional oblique‐dip profiles from outcrops of the lower Waterford Formation (Karoo Basin, South Africa) have been correlated. This data set provides a rare opportunity to assess the lateral variability in the sedimentary process record of the shelf‐to‐slope transition for eight successive clinothems over a 900 km2 area. The three profiles show similar shelf‐edge rollover trajectories, but this belies significant along‐margin variability in sedimentary processes and down‐dip sediment supply. The depositional architecture of three successive clinothems (WfC 3, 4 and 5) also show along‐shelf physiographic differences. The reconstructed shelf‐edge rollover position is not straight, and a westward curve to the north coincides with an area of greater sand supply to the slope beyond a shelf dominated by wave and storm processes. All the clinothems thicken northwards, indicating an along‐margin long‐term increase in accommodation that was maintained through multiple shoreline transits across the shelf. The origin of the differential subsidence cannot be discriminated confidently between tectonic or compaction processes. The interplay of basin margin physiography, differential subsidence rate and process regime resulted in significant across‐strike variability in the style and timing of sediment dispersal patterns beyond the shelf‐edge rollover. This study highlights the challenge for accurate prediction of the sediment partitioning across the shelf‐edge rollover in subsurface studies.  相似文献   

9.
Clinoforms are basinward-dipping and accreting palaeo-bathymetric profiles that record palaeo-environmental conditions and processes; thus, clinothems represent natural palaeo-archives. Here, we document shelf-edge scale clinoform sets which prograded through the entire width of an epicontinental marine basin (ca. 400 km), eventually encroaching onto the opposite basin flank, where they started to prograde upslope and landward, in defiance of gravity (“upslope-climbing clinoforms”). The giant westward-prograding Eridanos muddy shelf-edge clinothem originated from the Baltic hinterland in the Oligocene and achieved maximum regression in the Early Pleistocene, on the UK Central Graben (CG) and Mid North Sea High (MNSH), after crossing the whole North Sea mesopelagic depocentre and causing near complete basin infill. Here we integrate well and seismic data through the MNSH and CG and examine the Eridanos final heyday and demise, identifying five clinothem complexes (A1, A2, A3, B and C) and six depositional sequence boundaries (SB1 to SB6) in the Miocene-Recent section. Tectonic and climatic events drove the recent evolution of this system. Early Pleistocene climate cooling, in particular, resulted in a stepwise increase in sediment supply. This climaxed in the earliest Calabrian, following a likely Eburonian eustatic fall (=SB3) when the Eridanos clastic wedge was restructured from a 100–300 m thick compound shelf-edge and delta system to a “hybrid” shelf-edge delta at sequence boundary SB3 (ca. 1.75 Ma). In the ca. 40 kyr that followed SB3, a progradation rate peak (>1,000 m/kyr) is associated with clinoforms starting to accrete upslope, onto the east-dipping slope between CG and MNSH. This “upslope-climbing clinoform” phase was quickly followed by the maximum regression and final retreat of the Eridanos system in the Early Calabrian (=SB4), likely as the result of climate-driven changes in the Baltic hinterland and/or delta auto-retreat. To our knowledge, this contributions represents the first documentation of “upslope-climbing clinoforms” recorded in the stratigraphic record.  相似文献   

10.
Shelf-margin clinoforms and prediction of deepwater sands   总被引：1，自引：1，他引：1  
Early Eocene successions from Spitsbergen and offshore Ireland, showing well‐developed shelf‐margin clinoforms and a variety of deepwater sands, are used to develop models to predict the presence or absence of turbidite sands in clinoform strata without significant slope disturbance/ponding by salt or mud diapers. The studied clinoforms formed in front of narrow to moderate width (10–60 km) shelves and have slopes, 2–4°, that are typical of accreting shelf margins. The clinoforms are evaluated in terms of both shelf‐transiting sediment‐delivery systems and the resultant partitioning of the sand and mud budget along their different segments. Although this sediment‐budget partitioning is controlled by sediment type and flux, shelf width and gradient, process regime on the shelf and relative sea‐level behaviour, the most tell‐tale or predictive signs in the stratigraphic record appear to be (1) sediment‐delivery system type, (2) degree of shelf‐edge channelling and (3) character of shelf‐edge trajectory through time. The clinoform data sets from the Porcupine Basin (wells and 3‐D seismic) and from the Central Basin on Spitsbergen (outcrops) suggest that river‐dominated deltas are the most efficient delivery systems for dispersing sand into deep water beyond the shelf‐slope break. In addition, low‐angle or flat, channelled shelf‐edge trajectories associate with co‐eval deepwater slope and basin‐floor sands, whereas rising trajectories tend to associate with muddy slopes and basin floors. Characteristic features of the shelf‐edge, slope and basin‐floor segments of clinoforms for these trajectory types are documented. Seismic lines along the slope to basin‐floor transects tend to show apparent up‐dip sandstone pinchouts, but most of these are likely to be simply sidelap features. Dip lines aligned along the axes of sandy fairways show that stratigraphic traps are unlikely, unless slope channels become mud‐filled or are structurally partitioned. Another feature that is prominent in the data sets examined is the lack of slope onlap. During the relative rise of sea level back up to the shelf, the clinoform slopes are generally mud‐prone and they are characteristically aggradational.  相似文献   

11.
Late Miocene lacustrine clinoforms of up to 400 m high are mapped using a 1700 km2 3‐D seismic data set in the Dacian foreland basin, Romania. Eight Meotian clinoforms, constructed by sediment from the South Carpathians, prograded around 25 km towards southwest. The individual clinothems show thin (10–60 m thick), if any, topsets, disrupted foresets and highly aggradational bottomsets. Basin‐margin accretion occurred in three stages with changing of clinoform heights and foreset gradients. The deltaic system prograded into an early‐stage deep depocenter and contributed to high gradient clinoforms whose foresets were dominated by closely (100–200 m) spaced 1.5–2 km wide V‐shaped sub‐lacustrine canyons. During intermediate‐stage growth, 2–4 km wide canyons were dominant on the clinoform foresets. From the early to intermediate stages, the lacustrine shelf edges were consistently indented. The late‐stage outbuilding was characterised by smaller clinoforms with smoother foresets and less indentation along the shelf edge. Truncated and thin topsets persisted through all three stages of clinoform evolution. Nevertheless, the resulting long‐term flat trajectory shows alternating segments of forced and low‐amplitude normal regressions. The relatively flat trajectory implies a constant base level over time and was due to the presence of the Dacian–Black Sea barrier that limited water level rise by spilling to the Black Sea. Besides the characteristic shelf‐edge incision of the thin clinoform topsets and the resultant sediment bypass at the shelf edge, the prolonged regressions of the shelf margin promoted steady sediment supply to the basin. The high sediment supply at the shelf edges generated long‐lived slope sediment conduits that provided sustained sediment transport to the basin floor. Clinothem isochore maps show that large volumes of sediment were partitioned into the clinoform foresets, and especially the bottomsets. Sediment predominantly derived from frequent hyperpycnal flows contributed to very thick, ca. 300–400 m in total, bottomsets. Decreasing subsidence over time from the foredeep resulted in diminishing accommodation and clinoform height, reduced slope channelization and smoother slope morphology.  相似文献   

12.
Compaction-induced subsidence in the margin of a carbonate platform   总被引：1，自引：0，他引：1  
Abstract The Late Carnian Raibl Formation of the Sella Group (Dolomites, N Italy) forms a sedimentary wedge which thins progressively toward the core of a stratigraphically underlying Middle Carnian carbonate platform (Cassian Dolomite). The platform is composed largely of megabreccia clinoforms displaying progradation above the coeval basinal sequence (San Cassiano Formation). These basinal sediments thin from a maximum in a basinward direction to a pinchout towards the central core of the Sella buildup. The progradational foreslopes thin in an antithetic fashion, from a maximum immediately adjacent to the central core of the Sella to a minimum in a basinward direction. The wedge geometry and onlap of the Raibl Formation atop the Sella platform margin is interpreted as the result of compaction-induced differential subsidence and tilting of the platform top. Basinward increase in subsidence of the platform top resulted from a basinward increase in compaction of basinal San Cassiano sediments. Decompaction calculations and stratigraphic/geometric restoration of Carnian strata support this conclusion.  相似文献   

13.
《Basin Research》2018,30(4):708-729
The north–south trending, Late Cretaceous to modern Magallanes–Austral foreland basin of southernmost Patagonia lacks a unified, radiometric, age‐controlled stratigraphic framework. By simplifying the sedimentary fill of the basin to deep‐marine, shallow‐marine and terrestrial deposits, and combining 13 new U‐Pb detrital zircon maximum depositional ages (DZ MDAs) with published DZ MDAs and U‐Pb ash ages, we provide the first attempt at a unified, longitudinal stratigraphic framework constrained by radiometric age controls. We divide the foreland basin history into two phases, including (1) an initial Late Cretaceous shoaling upward phase and (2) a Cenozoic phase that overlies a Palaeogene unconformity. New DZ samples from the shallow‐marine La Anita Formation, the terrestrial Cerro Fortaleza Formation and several previously unrecognized Cenozoic units provide necessary radiometric age controls for the end of the Late Cretaceous foreland phase and the magnitude of the Palaeogene unconformity in the Austral sector of the basin. These samples show that the La Anita and Cerro Fortaleza Formations have Campanian DZ MDAs, and that overlying Cenozoic strata have Eocene to Miocene DZ MDAs. By filling this data gap, we are able to provide a first attempt at constructing a basinwide, age‐controlled stratigraphic framework for the Magallanes–Austral foreland basin. Results show southward progradation of shallow marine and terrestrial environments from the Santonian through the Maastrichtian, as well as a northward increase in the magnitude of the Palaeogene unconformity. Furthermore, our new age data significantly impact the chronology of fossil flora and dinosaur faunas in Patagonia.  相似文献   

14.
Geometric analysis shows that the angle of migration of coastal sedimentary facies is a function of the relative sea-level change and the thickness of sediment deposited or eroded. The angle of facies migration compared to the slopes on the sediment surface determines the degree of facies preservation and stratigraphic relationships to the surrounding facies. Vertical facies successions generated by radial migration of environments show a great deal of variety because the sediment surface in both marine and non-marine areas is concave-up. Both regressive and transgressive sequences with non-erosive marine-nonmarine contacts can be generated. Transgression at a slightly lower angle can form a ravinement surface cut on non-marine deposits with onlapping barrier sands or shallow marine deposits. Regression with relative sea-level drop generates a minor erosion surface with baselapping isolated shoreline deposits. Disequilibrium conditions occur when sea level varies at a rate exceeding the ability of the system to supply or redistribute sediment, with resulting changes in surficial slopes. Onlapping and downlapping stratal relationships across erosion surfaces result because of differences in slopes between marine and non-marine environments. These discontinuities are generally less than one degree, but could possibly be recognized on high quality multichannel seismic lines. Most of these discontinuities are probably not regionally extensive enough to be regarded as sequence boundaries. Tectonic tilting or differential subsidence of strata during depositional hiatuses is necessary to generate true regional unconformities or sequence boundaries. Where facies climb with respect to horizontal, erosion surfaces produced only by this migration may cut across lithostratigraphic units at higher angles, up to 3 or 4 degrees. Low-angle erosion surfaces relevant to the scales of sequence stratigraphic studies may result only from facies migration, even during a period of relative sea-level rise.  相似文献   

15.
《Basin Research》2018,30(Z1):452-478
Sedimentation in hangingwall dipslope settings is still a relatively underexplored topic in rift basin studies. A better understanding of the evolution of marine sedimentary environments in this kind of settings has to address the variations occurring both along the strike and down the dipslope. Previous work was mainly built on the analysis of subsurface data, relying on the visualization of coarse resolution (10s of m) seismic sections and sparsely located borehole logs (km apart). This study focuses on the sedimentology and stratal arrangement of excellent quality Miocene marine early syn‐rift and rift climax successions continuously exposed for more than 20 km along the strike of the hangingwall dipslope in the El Qaa Fault Block, Suez Rift, Egypt. The integration of traditional sedimentary field techniques and terrestrial LIDAR scanning allowed for a detailed analysis of dip and dip direction for the different depositional units. Three different phases of tilting were identified for the hangingwall dipslope, which controlled the overall evolution of the marine sedimentary environment in the area. The tilt of the hangingwall not only determined variations in facies, thickness and grain‐size of the deposits down the dipslope but also along its strike. The studied exposures of the El Qaa Fault Block dipslope constitute a unique outcrop analogue for marine sedimentation in hangingwall dipslopes.  相似文献   

16.
Conventional high resolution studies of varved sediments are able to identify clastic and biogenic laminae, but are often unable to resolve the nature of fine-scale lamination contained therein. This intra-annual signal provides us with the highest potential resolution from the sedimentary record and can be resolved using scanning electron microscopy (SEM). Six case studies from lacustrine and marine settings are presented to illustrate the combination of clastic and biogenic fabric types typically found in laminated sediments. Clastic laminae fabrics include those which originate through grain settling and those which are event deposits. The correct identification of event deposits is essential if varves are to be used chronologically. SEM-based biogenic laminae fabric studies have identified seasonal faunal successions where individual laminae may be less than 100 thick and most recently, deep chlorophyll maxima (DCM) summer diatom floras, providing an insight into seasonal scale processes. High resolution lamina fabric studies can provide a basis for generating records of seasonal and inter-annual variability, thus contributing to our understanding of lacustrine and marine processes and palaeoenvironmental interpretation.  相似文献   

17.
The adequate documentation and interpretation of regional‐scale stratigraphic surfaces is paramount to establish correlations between continental and shallow marine strata. However, this is often challenged by the amalgamated nature of low‐accommodation settings and control of backwater hydraulics on fluvio‐deltaic stratigraphy. Exhumed examples of full‐transect depositional profiles across river‐to‐delta systems are key to improve our understanding about interacting controlling factors and resultant stratigraphy. This study utilizes the ~400 km transect of the Cenomanian Mesa Rica Sandstone (Dakota Group, USA), which allows mapping of down‐dip changes in facies, thickness distribution, fluvial architecture and spatial extent of stratigraphic surfaces. The two sandstone units of the Mesa Rica Sandstone represent contemporaneous fluvio‐deltaic deposition in the Tucumcari sub‐basin (Western Interior Basin) during two regressive phases. Multivalley deposits pass down‐dip into single‐story channel sandstones and eventually into contemporaneous distributary channels and delta‐front strata. Down‐dip changes reflect accommodation decrease towards the paleoshoreline at the Tucumcari basin rim, and subsequent expansion into the basin. Additionally, multi‐storey channel deposits bound by erosional composite scours incise into underlying deltaic deposits. These represent incised‐valley fill deposits, based on their regional occurrence, estimated channel tops below the surrounding topographic surface and coeval downstepping delta‐front geometries. This opposes criteria offered to differentiate incised valleys from flood‐induced backwater scours. As the incised valleys evidence relative sea‐level fall and flood‐induced backwater scours do not, the interpretation of incised valleys impacts sequence stratigraphic interpretations. The erosional composite surface below fluvial strata in the continental realm represents a sequence boundary/regional composite scour (RCS). The RCS’ diachronous nature demonstrates that its down‐dip equivalent disperses into several surfaces in the marine part of the depositional system, which challenges the idea of a single, correlatable surface. Formation of a regional composite scour in the fluvial realm throughout a relative sea‐level cycle highlights that erosion and deposition occur virtually contemporaneously at any point along the depositional profile. This contradicts stratigraphic models that interpret low‐accommodation settings to dominantly promote bypass, especially during forced regressions. Source‐to‐sink analyses should account for this in order to adequately resolve timing and volume of sediment storage in the system throughout a complete relative sea‐level cycle.  相似文献   

18.
The South China Sea continental margin in the Qiongdongnan Basin (QDNB) area has incrementally prograded since 10.5 Ma generating a margin sediment prism more than 4km-thick and 150–200 km wide above the well-dated T40 stratigraphic surface. Core and well log data, as well as clinoform morphology and growth patterns along 28 2D seismic reflection lines, illustrate the evolving architecture and margin morphology; through five main seismic-stratigraphic surfaces (T40, T30, T27, T20 and T0) frame 15 clinothems in the southwest that reduce over some 200 km to 8 clinoforms in the northeast. The overall margin geometry shows a remarkable change from sigmoidal, strongly progradational and aggradational in the west to weakly progradational in the east. Vertical sediment accumulation rate increased significantly across the entire margin after 2.4 Ma, with a marked increase in mud content in the succession. Furthermore, an estimate of sediment flux across successive clinoforms on each of the three selected seismic cross sections indicate an overall decrease in sediment discharge west to east, away from the Red River depocenter, as well as a decrease in the percentage of total discharge crossing the shelf break in this same direction. The QDNB Late Cenozoic continental margin growth, with its overall increased sediment flux, responded to the climate-induced, gradual cooling and falling global sea level during this icehouse period.  相似文献   

19.
Deltaic sediments of the Billund and Bastrup sands were deposited in a ramp setting in the storm-dominated North Sea during the early Miocene. A marked relief in the hinterland and the relatively high precipitation resulted in a high sediment supply to the sea and progradation of major delta-coastal plains south of the present-day Norway. The focus of this study is on the forced regressive wedge system tracts of the two delta complexes, which show remarkably well-developed marine erosional surfaces associated with sand-rich packages characterised by steeply dipping clinoforms (up to 10°). The well-developed clinoformal packages indicate that deposition occurred in water depths of 60–100 m even under a sea-level fall. The sand-rich delta lobes also demonstrate that it was a high-energy environment and that wave-generated re-suspension at the delta front effectively re-sorted the sediments and sand-rich systems became separated from mud-dominated portions of the delta complexes. The evolution of the above occurred in a basin that has been exposed by inversion tectonism. The sediment supply was consequently high. During deposition, eustatic sea-level changes strongly controlled the evolution of sequences. The results found in this study may be applicable for mapping reservoir sands in ramp settings and in rift basins especially when looking for reservoir rocks in the basinal setting or when carrying out detailed reservoir mapping in already existing hydrocarbon fields.  相似文献   

20.
Although the trajectory and geometry of clinoforms in different types of basins have been described in many studies, few studies discuss the influence of halokinesis on clinoforms in salt-related basins. In this study, we analyse the Lower Cretaceous clinoforms in the Tiddlybanken Basin, Norwegian Barents Sea to evaluate the impact of salt mobilization on the geometry and trajectory of clinoforms as well as its implications on sediment partitioning. To accomplish this objective, we use a multidisciplinary approach consisting of seismic and well-interpretation, 3D structural restoration, and forward stratigraphic modelling. The results show that salt mobilization affects prograding clinoforms by: (a) causing lateral variations in progradation rates, resulting in complex palaeogeography, (b) increasing slope angles, which affect the equilibrium of the clinoform profile and can trigger slope-readjustment processes and (c) producing lateral and temporal variations in accommodation space, leading to different clinoform trajectories, stacking patterns and reservoir distribution along the basin. Forward stratigraphic modelling shows that in salt-related basins and other tectonically active basins, the isolated use of conventional methods for clinoform analysis might lead to potential interpretation pitfalls such as misinterpretation of trajectories and overestimation of foreset angles, which can have negative consequences for exploration models.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号