首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 46 毫秒
1.
We present detailed observations of rivers crossing active normal faults in the Central Apennines, Italy, where excellent constraints exist on the temporal and spatial history of fault movement. We demonstrate that rivers with drainage areas > 10 km2 and crossing faults that have undergone an increase in throw rate within the last 1 My, have significant long-profile convexities. In contrast, channels that cross faults that have had a constant-slip rate for 3 My have concave-up profiles and have similar concavities and steepness indices to rivers that do not cross any active fault structures. This trend is consistent across the Central Apennines and cannot be explained by appeal to lithology or regional base level change. The data challenge the belief that active faulting must always be reflected in river profiles; instead, the long-profile convexities are best explained as a transient response of the river system to a change in tectonic uplift rate. Moreover, for these rivers we demonstrate that the height of the profile convexity, as measured from the fault, scales with the magnitude of the uplift rate increase on the fault; and we establish that this relationship holds for throw rate variation along strike for the same fault segment, as well as between faults. These findings are shown to be consistent with predictions of channel response to changing uplift rate rates using a detachment-limited fluvial erosion model, and they illustrate that analysis of the magnitude of profile convexities has considerable predictive potential for extracting tectonic information. We also demonstrate that the migration rate of the profile convexities varies from 1.5–10 mm/y, and is a function of the slip rate increase as well as the drainage area. This is consistent with n > 1 for the slope exponent in a classical detachment-limited stream-power erosion law, but could potentially be explained by incorporating an erosion threshold or an explicit role for sediment in enhancing erosion rates. Finally, we show that for rivers in extensional settings, where the response times to tectonic perturbation are long (in this case > 1 My), attempts to extract tectonic uplift rates from normalised steepness indices are likely to be flawed because topographic steady state has not yet been achieved.  相似文献   

2.
New estimates on the Quaternary slip rate of the active transform margin of North Anatolia are provided. We investigated the area struck by a Mw 7.1 earthquake on the 12th of November 1999 that ruptured the Düzce Fault segment of the North Anatolian Fault. In order to analyze the spectacular tectonically driven cumulative landforms and the drainage pattern settings, we carried out a 1:25,000-scale geological and geomorphological mapping along the fault trace. We reconstruct and describe, as offset geomorphic markers, right-hand stream deflections and fluvial terraces inset into alluvial fan deposits. Radiocarbon dating indicates that  100 m stream deflections were built up by the last  7000 yrs of fault activity. Conversely, two documented and correlated Late Pleistocene fluvial terraces are horizontally offset by  300 and  900 m, respectively. These were dated by means of Optically Stimulated Luminescence (OSL) to  21 ka BP and 60 ka BP. Assuming a constant rate of deformation for the Düzce Fault, ages and related offsets translate to consistent slip rates that yield an average slip rate of 15.0 ± 3.2 mm/yr for the last 60 ka. Thus, the Düzce Fault importantly contributes to the North Anatolian margin deformation, suggesting a present-day partitioning of displacement rates with the Mudurnu Fault to the south and confirming its important role in the seismic hazard of the area.  相似文献   

3.
We present a study on the impact of litho-structural setting and neotectonic activity on meso- and macro-scale relief production in Alpine areas. The topography of the high alpine Triglav Lakes Valley, NW Slovenia, was studied by means of detailed mapping and stratigraphic study of the valley. The Triglav Lakes Valley is characterised by a generally asymmetric transverse (E–W) profile: a very steep eastern slope, a relatively flat valley and a relatively gentle western slope. On the transverse profile the valley floor is essentially flat, gently dipping towards the east. In the longitudinal cross-section, however, the valley floor is marked by sharply-defined fault blocks extending in a W–E to NW–SE direction. Additionally, the highest block (elevations  2100 m) is in the northern part of the valley, the lowest (elevations  1600 m) in the southern part of the valley. Our research shows that the Triglav Lakes Valley directly represents the topographic expression of Paleogene–Neogene thrusting and faulting, having recorded the following geomorphologic evolutionary stages: 1. an Oligocene to early Miocene W-vergent thrusting phase, with steep W-facing slopes of the eastern part of the valley directly representing the thrusting front; and 2. a Neogene-to-present strike–slip faulting in NNE–SSW direction with two bifurcating right-lateral strike–slip systems. We show that the Triglav Lakes Valley almost perfectly mimics the wedge-shaped damage zone located between these faults.  相似文献   

4.
The structural evolution of the Miocene to Recent Gediz Graben is intimately related to the evolution of its southern margin. This margin is shaped by a time‐transgressive, composite structure that possesses flat‐ramp geometry with three separate dip domains: a low‐angle shallow segment; a steeper middle segment; and a low‐angle deeper segment. This geometry was probably produced by one of two mechanisms, which operated perpendicular to the general trend of the graben, resulting in gradual back‐rotation followed by abandonment of the shallow segment as it was dissected by the high‐angle normal fault(s). The geometry of the southern margin structure is not simple along‐strike. It includes broad undulations and discrete fault segments, developed by large‐scale fault growth processes through segment linkage. The along‐strike growth of the southern margin‐bounding structure is responsible for the composite character of the Gediz Graben and controls the observed stratigraphic variability. Two sub‐basins aligned with the major segments of the southern graben margin structure have been investigated. The Salihli and Ala?ehir sub‐basins comprising 3000 m sedimentary thickness are separated by an intervening basement high, that is covered by a thin veneer of post‐Miocene sediments. The two sub‐basins, which evolved as isolated basins during most of the graben history, amalgamated during post‐Miocene time to form the composite configuration of the graben. There is a general east to west trend of growth for the Gediz Graben.  相似文献   

5.
High resolution topographic data along fault zones are important aids in the delineation of recently active breaks. A 15 km-long portion of the south-central San Andreas Fault (SAF) along the southern Cholame segment contains well preserved tectonic landforms such as benches, troughs, scarps, and aligned ridges that indicate recurring earthquake slip. Recently acquired LiDAR topographic data along the entire southern SAF (“B4” project) have shot densities of 3–4 m− 2. Computed from the LiDAR returns, Digital Elevation Models (DEMs) of 0.25 to 0.5 m resolution using local binning with inverse distance weighting and 0.8 m or larger search radii depict the tectonic landforms at paleoseismic sites well enough to assess them confidently. Mapping of recently active breaks using a LiDAR-only based approach compares well with aerial photographic and field based methods. The fault zone varies in width from meters to nearly 1 km and is comprised of numerous en echelon meter to kilometer-length overlapping sub parallel fault surfaces bounding differentially moving blocks that elongate parallel to the SAF. The semantic variations of what constitutes “active” and the importance of secondary traces influence the breadth and complexity of the resulting fault trace maps.  相似文献   

6.
Studies on the geomorphological evolution of the South American passive margin have been based on the pediplanation model, which predicts that its morphology is a response to regional uniform uplift and concomitant development of erosion surfaces. We combined remote sensing, geological mapping, lithostratigraphic and facies analyses, and luminescence dating in the Cariatá trough, northeastern Brazil, in order to determine how brittle tectonics and climate influenced colluviation and the shaping of local landforms in the Quaternary. Our work indicates that Cariatá is an asymmetrical trough  40 km long,  25 km wide, 250–550 m deep, and delimited by ENE–WSW-trending faults to the north and south. We recognized an ENE–WSW-oriented compression related to a strike-slip faulting regime, which corresponds to the present-day stress field in the region. This faulting event led to the deposition of colluvial fans, shed from adjacent uplifted crustal blocks, in a tectonically controlled depression. The colluvial succession is  45 m thick and presents two facies assemblages that filled the southern and, in particular, the northern borders of the trough: non-cohesive debrisflow and mudflow deposits. Optically stimulated luminescence dates of the sedimentary infill yielded ages at 224–128 ka and 45–28 ka, dominated by debrisflow and mudflow deposits, respectively. These ages may be over-estimated due to poor bleaching of colluvium, but they and our field data suggest that the margins of the trough were tectonically uplifted and eroded twice in the Late Pleistocene. The spasmodic colluvial accretion reflects the occurrence of high-magnitude, low-recurrence episodes probably associated with climate shifts in a semi-arid hillslope system. It follows that the present-day low-lying piedmont in which the Cariatá trough occurs is a juxtaposition of surfaces of various ages. This trough may have counterparts across the region. These conclusions do not corroborate the application of the cyclical pediplanation hypothesis in the area.  相似文献   

7.
The Otway Basin in the south of Victoria, Australia underwent three phases of deformation during breakup of the southern Australian margin. We assess the geometry and kinematics of faulting in the basin by analysing a 3‐D reflection seismic volume. Eight stratigraphic horizons and 24 SW‐dipping normal faults as well as subordinate antithetic faults were interpreted. This resulted in a high‐resolution geological 3‐D model (ca. 8 km × 7 km × 4 km depth) that we present as a supplementary 3‐D PDF (Data S1). We identified hard‐ and soft‐linking fault connections over the entire area, such as antithetic faults and relay ramps, respectively. Most major faults were continuously active from Early to Late Cretaceous, with two faults in the northern part of the study area active until at least the Oligocene. Allan maps of faults show tectonic activity continuously waned over this time period. Isopach maps of stratigraphic volumes quantify the amount of syn‐sedimentary movement that is characteristic of passive margins, such as the Otway Basin. We show that the faults possess strong corrugations (with amplitudes above the seismic resolution), which we illustrated by novel techniques, such as cylindricity and curvature. We argue that the corrugations are produced by sutures between sub‐vertical fault segments and this morphology was maintained during fault growth. Thus, they can be used to indicate the kinematics vector of the fault movement. This evidences, together with left‐stepping relay ramps, that 40% of the faults had a small component (up to 25°) of dextral oblique slip as well as normal (dip‐slip) movement.  相似文献   

8.
The geomorphology of the western sector of the Mid-Channel Anticline (MCA), Santa Barbara, southern California suggests the actively growing fold is laterally propagating to the west. The presence of fold scarps and cross faults that segment the structure suggests that buried faults that are producing the folding are present at shallow depths. The summit area of the anticline at the Last Glacial Maximum (22 to 19 ka) was probably a small late Pleistocene island. Evidence for presence of the island includes what appears to be terrestrial erosion and is supported by assumption of sea level change and rates of uplift and subsidence.Pockmarks and domes ranging in diameter from  10 to 100 m, and several meters deep are present along the crest and flanks of the MCA. These features appear to be the result of hydrocarbon emission. Their formation has significantly modified the surface features, producing simple to complex erosional and/or constructional topography. A large pockmark near the anticline crest dated by two calibrated AMS radiocarbon dates of 25.3 and 36.9 ka continues to emit hydrocarbon gases. We term the topography produced by hydrocarbon emission as Hydrocarbon Induced Topography (HIT).  相似文献   

9.
Using the Ar–Ar technique, we have obtained the first numerical dates for the Pleistocene volcanism along the valley of the River Ceyhan in the Düziçi area of southern Turkey, in the western foothills of the Amanos Mountains. Our six dates indicate a single abrupt episode of volcanism at  270 ka. We have identified a staircase of 7 fluvial terraces, at altitudes of up to  230 m above the present level of the Ceyhan. Using the disposition of the basalt as an age constraint, we assign these terraces to cold-climate stages between marine oxygen isotope stages 16 and 2, indicating rates of fluvial incision, equated to surface uplift, that increase upstream through the western foothills of this mountain range at between 0.25 and 0.4 mm a− 1. Extrapolation of these uplift rates into the axis of the range suggests that the entire  2300 m of present-day relief has developed since the Mid-Pliocene, a view that we confirm using numerical modelling. Since  3.7 Ma the Amanos Mountains have formed a transpressive stepover along the northern part of the Dead Sea Fault Zone, where crustal shortening is required by the geometry. Using a physics-based technique, we have modelled the overall isostatic response to the combination of processes occurring, including crustal thickening caused by the shortening, erosion caused by orographic precipitation, and the resulting outward flow of mobile lower-crustal material, in order to predict the resulting history of surface uplift. This modelling suggests that the effective viscosity of the lower crust in this region is in the range  1–2 × 1019 Pa s, consistent with a Moho temperature of  590 ± 10 °C, the latter value being in agreement with heat flow data. This modelling shows that the nature of the active crustal deformation is now understood, to first order at least, in this key locality within the boundary zone between the African and Arabian plates, the structure and geomorphology of which have been fundamentally misunderstood in the past.  相似文献   

10.
Late Quaternary slip across the Cañada David detachment has produced an extensive array of Quaternary scarps cutting alluvial-fans along nearly the entire length (~ 60 km) of the range-bounding detachment. Eight regional alluvial-fan surfaces (Q1 [youngest] to Q8 [oldest]) are defined and mapped along the entire Sierra el Mayor range-front. Terrestrial cosmogenic nuclide 10Be concentrations from individual boulders on alluvial-fan surfaces Q4 and Q7 yield surface exposure ages of 15.5 ± 2.2 ka and 204 ± 11 ka, respectively. Formation of the fans is probably tectonic, but their evolution is strongly moderated by climate, with surfaces developing as the hydrological conditions have changed in response to climate change on Milankovitch timescales. Systematic mapping reveals that the fault scarp array along active range-bounding faults in Sierras Cucapa and El Mayor can be divided into individual rupture zones, based on cross-cutting relationships with alluvial-fans. Quantitative morphological ages of the Laguna Salada fault-scarps, derived from linear diffusive degradation modeling, are consistent with the age of the scarps based on cross-cutting relationships. The weighted means of the maximum mass diffusivity constant for all scarps with offsets < 4 m is 0.051 and 0.066 m2/ka for the infinite and finite-slope solutions of the diffusion equation, respectively. This estimate is approximately an order of magnitude smaller than the lowest diffusivity constants documented in other regions and it probably reflects the extreme aridity and other microclimatic conditions that characterize the eastern margin of Laguna Salada.  相似文献   

11.
We analyze remarkable examples of the large ( 10,000 km2) and local-scale ( 100 km2) landscape forms related to Late Cenozoic geomorphologic evolution of the Andean forearc region in the Southern Atacama Desert. We also consider the continental sedimentary deposits, so-called “Atacama Gravels”, which are related to the degradation of the landscape during the Neogene. Our analysis integrates 1:50,000 field cartography, Landsat TM images observations,  1:1000 sedimentary logging data, and 50 m horizontal resolution topographic data to reconstruct the Late Cenozoic geomorphologic evolution of this region and discuss the factors that control it, i.e., Miocene aridification of the climate and Neogene Central Andean uplift. We determine that the Precordillera was already formed in the Oligocene and most of the present-day altitude of the Precordillera was reached before that time. Afterward, five episodes of geomorphologic evolution can be differentiated: (1) the development of an Oligocene deep incised drainage system cutting the uplifted Precordillera (up to 2000 m of vertical incision) and connecting it to the Ocean; followed by (2) the infilling of deep incised valleys by up to 400 m of Atacama Gravels. This infill started in the Early Miocene with the development of fluvial deposition and finished in the Middle Miocene with playa and playa lake depositions. We propose that playa-related deposition occurs in an endorheic context related to tectonic activity of the Atacama Fault System and Coastal Cordillera uplift. However, the upward sedimentologic variation in the Atacama Gravels evidences a progressive aridification of the climate. Subsequently, we have identified the effects of the Middle–Upper Miocene slow tectonic deformation: the Neogene Andean uplift is accommodated by a tilting or flexuring of the inner-forearc (Central Depression and Precordillera) related to some hundreds of meters of uplift in the Precordillera. This tilting or flexuring results in (3) the Middle Miocene re-opening of the valley network to the Pacific Ocean. Upper Miocene aridification, from arid to hyperarid, induces alluvial fans backfilling in the Central Depression (4) resulting in up to 50 m of Atacama Gravel deposition. Finally, in response to an increase in the rate of tilting, a new phase of vertical incision (up to 800 m in the Precordillera) allows the development of the canyon that crosses the forearc (5).  相似文献   

12.
The Central Graben in the Danish North Sea sector consists of a series of N–S to NW–SE trending, eastward‐tilted half‐grabens, bound to the east by the Coffee Soil Fault zone. This fault zone has a complex Jurassic history that encompasses at least two fault populations; N–S to NNW–SSE striking faults active in the Late Aalenian–Early Oxfordian, and NNW–SSE to WNW–ESE striking faults forming in Late Kimmeridgian time (sensu gallico), following a short period of tectonic quiescence. Sediment transport across the Coffee Soil Fault zone was controlled by fault array evolution, and in particular the development of relay ramps that formed potential entry points for antecedent drainage systems from the Ringkøbing–Fyn High east of the rift. Fault and isochore trends of the Upper Kimmeridgian–Lower Volgian succession in the northeast Danish Central Graben show that accommodation space was initially generated close to several minor, isolated or overlapping faults. Subsidence became focused along a few master faults in the Early Volgian through progressive linkage of selected faults. Seismic time isochore geometries, seismic facies, amplitude trends and well ties indicate the presence of coarse clastic lithologies locally along the fault zone. The deposits probably represent submarine mass flow deposits supplied from footwall degradation and possibly also from the graben hinterland via a relay ramp. The latter source appears to have been cut off as the relay ramp was breached and the footwall block are uplifted. Fault growth and linkage processes thus controlled the spatial and temporal trends of accommodation space generation and sediment supply to the rift basin.  相似文献   

13.
Alpa Sridhar   《Geomorphology》2007,88(3-4):285-297
This paper attempts to quantify contemporary and palaeo-discharges and changes in the hydrologic regime through the mid–late Holocene in the alluvial reach of the arid Mahi River basin in western India. The occurrence of terraces and pointbars high above active river levels and change in the width/depth ratio can be regarded as geomorphic responses to changes in discharge. Discharge estimates are made based on the channel dimensions and established empirical relations for the three types of channels: mid–late Holocene, historic (the channel that deposited extensive pointbars above the present-day average flow level) and the present ones. The bankfull discharge of the mid–late Holocene channel was  55 000 m3 s− 1 and that of the historic channel was  9500 m3 s− 1, some  25 times and  5 times greater than that of the present river (2000 m3 s− 1), respectively. Since the mid–late Holocene, the channel form has changed from wide, large-amplitude meanders to smaller meanders, and decreases in the width/depth ratio, unit stream power and the bed shear stresses have occurred. It can be inferred that there has been a trend of decreasing precipitation since the mid–late Holocene.  相似文献   

14.
About 2000 active faults are known to exist within the land area of Japan. Most of these active faults have deformed the topographic surfaces which were formed in the late Quaternary, including fluvial terraces; and the formative ages of these terraces are estimated mainly by tephrochronology. Fluvial terraces in the eastern Hokuriku region, comprising the Toyama, Tonami, and Kanazawa Plains, northern central Japan, are widely distributed and have been deformed by reverse active faults. The formative age of terraces in this area has not been reported, as volcanic ash deposits are rarely visible within terrace deposits and the overlying loamy soil, and outcrops of fluvial terraces are quite scarce in this area. In the present study, we carried out a drilling survey on these terraces to obtain samples of the overlying loamy soil and upper part of terrace deposits. From these samples, we extracted some well-known widespread volcanic ash, from which we were able to estimate the approximate age of the terraces and the vertical slip rate of the active faults. Late Quaternary fluvial terraces in eastern Hokuriku are divided into 12 levels: Terraces 1 to 12 in descending order. Widespread tephras such as the Kikai-Tozurahara Tephra (K-Tz: 95 ka) are contained in the lowest part of the loamy soil in Terrace 4 and the Daisen-Kurayoshi Pumice (DKP: 55 ka) is present in the lowest part of the loamy soil in Terrace 6. From the ages and the vertical displacements of the fluvial terraces, the late Quaternary average vertical slip rates of active faults in eastern Hokuriku are estimated to be 0.2–0.9 mm/year (Uozu fault), 0.1–0.4 mm/year (Kurehayama fault), 0.1–0.3 mm/year (Takashozu fault), 0.1–0.4 mm/year (Hohrinji fault), and 0.5–0.8 mm/year (Morimoto-Togashi fault). We also estimated the recurrence interval of earthquakes related to active faults from displacement per event and ages of terraces and no significant difference in vertical displacement per single earthquake for different active faults, and recurrence intervals tend to be inversely proportional to vertical displacement rates. This study demonstrates that a combination of drilling of loamy soil and precise cryptotephra analysis of fluvial terraces can be used to estimate the formative age of the terraces and the average slip rate of active faults in areas where volcanic ash deposits are rare.  相似文献   

15.
A Karst Connection model for Grand Canyon, Arizona, USA   总被引：2，自引：1，他引：1  
C.A. Hill  N. Eberz  R.H. Buecher   《Geomorphology》2008,95(3-4):316-334
Along the Asturian coast of northern Spain an uplifted wave-cut platform extends for  100 km east–west. The steep cliff which bounds the gently seaward-dipping platform to the north increases in height from 30 m in the west to 100 m in the east and reflects the overall eastward increase in platform elevation. The southern edge of the 2–4 km-wide platform runs along the foothills of the Cantabrian Mountains, as constrained by a high-resolution digital elevation model. The marine platform, which was carved into deformed Paleozoic bedrock with abundant quartzite beds, is largely covered by weathered marine and continental sediments. Quartzite samples from flat bedrock outcrops which are currently not covered by sediment or soil yield cosmogenic nuclide concentrations (21Ne, 10Be and 26Al) that demonstrate a long and complex exposure history, including periods of burial with partial or complete shielding from cosmic rays. The combination of multiple cosmogenic nuclides yields a minimum age of 1–2 Ma for the platform. Taking into account (i) the horizontal and vertical extent of the platform, (ii) the high resistance to erosion of the quartzitic bedrock, and (iii) published data on the magnitude of past sea level fluctuations, we suggest that the wave-cut platform formed in the Pliocene. Subvertical faults cutting the platform at high angles to the coastline offset the southern edge of the platform by 20 to 40 m and reactivate the pre-existing anisotropy in the Paleozoic bedrock. Uplift and crustal deformation of the coastal region have occurred after platform formation in the Pliocene and may still be active. The slow deformation of the northern edge of the Iberian plate including the Cantabrian Mountains may result from the ongoing slow convergence at an incipient subduction zone extending along the coast of northern Spain.  相似文献   

16.
《Geomorphology》2002,42(3-4):255-278
The Hunter Mountain fault zone strikes northwesterly, is right-lateral strike-slip, and kinematically links the northern Panamint Valley fault zone to the southern Saline Valley fault zone. The most recent displacement of the fault is recorded in the offset of Holocene deposits along the entire length of the fault zone. Right-lateral offsets of drainage channels within Grapevine Canyon reach up to 50 to 60 m. Initial incision of the offset channels is interpreted on the basis of geomorphic and climatic considerations to have occurred approximately 15 ka. The 50 to 60 m of offset during 15 ka corresponds to a right-lateral fault slip rate of 3.3–4.0 mm/year within Grapevine Canyon. Further to the north along the Nelson Range front, the fault is composed of two sub-parallel fault strands and the fault begins to show an increased normal component of motion. A channel margin that is incised into a Holocene surface that is between 10 and 128 ka in age is offset 16–20 m, which yields a broad minimum bound on the lateral slip rate of 0.125–2.0 mm/year. The best preserved single-event displacements recorded in Holocene deposits range from 1.5 to 2.5 m. In addition to faulting within Grapevine Canyon and the main rangefront fault along the southwest edge of Saline Valley, there also exist normal fault strands within the Valley that strike northeasterly and towards Eureka Valley. The northeasterly striking normal faults in the Valley appear to be actively transferring dextral slip from the Hunter Mountain fault zone north and east onto the Furnace Creek fault zone. Separations on northerly trending, normal faults within Saline Valley yield estimates of slip rates in the hundredths of millimeters per year.  相似文献   

17.
We analyze geomorphic properties extracted from LiDAR and SRTM (Shuttle Radar Topography Mission) data to test whether the damage zone along the central San Jacinto Fault (SJF) zone can be resolved with remotely-sensed data in a quantitative fashion. The SJF is one of the most active faults in southern California, with well expressed geomorphology and a fast slip rate, as seen in the geology and by GPS. We use ArcMap and the TauDEM toolbox to compare several morphometric parameters, including drainage density (Dd), on both sides of the fault, using a 1 km and a 5 km buffer for the LiDAR and SRTM data, respectively. We also analyze the spatial patterns of Dd near the fault, using two different definitions of spatial Dd. The high resolution of the LiDAR data allows us to focus on a single fault, eliminating the effects of parallel nearby faults. From the LiDAR data we find that the highest Dd values occur in areas between two fault strands, followed generally by rocks on the northeast side of the fault, with the lowest Dd values occurring on the southwest side of the fault. The SRTM data shows a band of high Dd values centered on the main fault trace with ~ 1 km width. Our results indicate that there is a strong correlation between drainage density and proximity to the fault, with zones of structural complexity along the fault displaying the highest Dd. We interpret this to largely be an effect of degree of rock damage, as these are areas that are expected to be more damaged, and field observations support this contention. If we are correct, then it appears that the northeast side of the SJF is generally more damaged. South of the trifurcation area there is evidence that the signal is reversed on the larger scale, with more damage on the southwest side of the fault inferred from the SRTM data, possibly caused by extension between the Coyote Creek and Clark faults. The implications of the observed asymmetry could be geological evidence for rupture propagation direction, because a preferred propagation direction is predicted to produce asymmetric damage structure that would be recorded in the volume of rock surrounding a fault.  相似文献   

18.
Vimal Singh  S.K. Tandon   《Geomorphology》2008,102(3-4):376-394
The Himalayan orogenic belt, formed as a result of collision tectonic processes, shows abundant evidence of neotectonic activity, active tectonics, and the occurrence of historical earthquakes. Its frontal deformation zone is characterized, in some segments, by intermontane longitudinal valleys (duns). Such frontal segments of the Himalaya are marked by the occurrence of multiple mountain fronts.In one such segment of the foothills of the NW Himalaya, the Pinjaur dun is developed and marked by three mountain fronts: MF1A and MF1B associated with the southernmost Himalayan Frontal Thrust (HFT), MF2 associated with the Sirsa fault, and MF3 associated with the Barsar thrust along the southern margin of the relatively higher main part of the sub-Himalaya. Geomorphic responses to the tectonic activity of these and related structural features have been analyzed through the use of geomorphic indices, drainage density, stream longitudinal profiles, drainage anomalies, and hypsometric analysis. Also, fault and fold growth and their expression on landform development was studied using a combination of surface profiles and field observations.The values of valley floor width to height ratio (Vf) for valleys associated with MF1 ranged between 0.07 and 0.74, and for valleys associated with MF2 ranged from 1.02–5.12. Vf for the four major valleys associated with MF1B ranged from 1.1–1.7. The asymmetry factor for 26 drainage basins related to MF1A indicate these have developed under the influence of a transverse structure. These results taken together with those obtained from the Hack profiles and SL index values, hypsometry, drainage density, and drainage anomalies suggest that the faults associated with the mountain fronts and related structures are active.Active tectonics and neotectonic activity have led to the formation of four surfaces in the Pinjaur dun. In addition, an important drainage divide separating the Sirsa and Jhajara drainage networks also developed in the intermontane valley. Surface profile analysis helped in deciphering the growth history of the fault bend fold structures of the outermost Siwalik hills. The effects of tectonic activity on the proximal part of the Indo-Gangetic plains are interpreted from the remarkable river deflections that are aligned linearly over tens of kilometers in a zone about 10 km south of the HFT.Based on these integrated structural and tectonic geomorphological approaches, a morphotectonic evolutionary model of the dun has been proposed. This model highlights the role of uplift and growth history of the fault bend fold structures of the outermost Siwalik hills on (i) the depositional landforms and drainage development of the Pinjaur dun, and (ii) valley development of the outermost Siwalik hills.Importantly, this study postulates the formation of an incipient mountain front that is evolving ahead of the HFT and the outermost Siwalik hills in the Indo-Gangetic plains.  相似文献   

19.
The landscape evolution in Neogene intramontane basins is a result of the interaction of climatic, lithologic, and tectonic factors. When sedimentation ceases and a basin enters an erosional stage, estimating erosion rates across the entire basin can offer a good view of landscape evolution. In this work, the erosion rates in the Guadix–Baza basin have been calculated based on a volumetric estimate of sediment loss by river erosion since the Late Pleistocene. To do so, the distribution of a glacis surface at ca. 43 kyr, characterised by a calcrete layer that caps the basin infilling, has been reconstructed. To support this age, new radiometric data of the glacis are presented. The volume of sediment loss by water erosion has been calculated for the entire basin by comparing the reconstructed geomorphic surface and the present-day topography. The resulting erosion rates vary between 4.28 and 6.57 m3 ha− 1 yr− 1, and are the consequence of the interaction of climatic, lithologic, topographic, and tectonic factors. Individual erosion rates for the Guadix and Baza sub-basins (11.80 m3 ha− 1 yr− 1 and 1.77 m3 ha− 1 yr− 1 respectively) suggest different stages of drainage pattern evolution in the two sub-basins. We attribute the lower values obtained in the Baza sub-basin to the down-throw of this sub-basin caused by very recent activity along the Baza fault.  相似文献   

20.
The glacial buzzsaw hypothesis suggests that efficient erosion limits topographic elevations in extensively glaciated orogens. Studies to date have largely focussed on regions where large glaciers (tens of kilometres long) have been active. In light of recent studies emphasising the importance of lateral glacial erosion in lowering peaks and ridgelines, we examine the effectiveness of small glaciers in limiting topography under both relatively slow and rapid rock uplift conditions. Four ranges in the northern Basin and Range, Idaho, Montana, and Wyoming, USA, were chosen for this analysis. Estimates of maximum Pleistocene slip rates along normal faults bounding the Beaverhead–Bitterroot Mountains (~ 0.14 mm y− 1), Lemhi Range (~ 0.3 mm y− 1) and Lost River Range (~ 0.3 mm y− 1) are an order of magnitude lower than those on the Teton Fault (~ 2 mm y− 1). We compare the distribution of glacial erosion (estimated from cirque floor elevations and last glacial maximum (LGM) equilibrium line altitude (ELA) reconstructions) and fault slip rate with three metrics of topography in each range: the along-strike maximum elevation swath profile, hypsometry, and slope-elevation profiles. In the slowly uplifting Beaverhead–Bitterroot Mountains, and Lemhi and Lost River Ranges, trends in maximum elevation parallel ELAs, independent of variations in fault slip rate. Maximum elevations are offset ~ 500 m from LGM ELAs in the Lost River Range, Lemhi Range, and northern Beaverhead–Bitterroot Mountains, and by ~ 350 m in the southern Beaverhead–Bitterroot Mountains, where glacial extents were less. The offset between maximum topography and mean Quaternary ELAs, inferred from cirque floor elevations, is ~ 350 m in the Lost River and Lemhi Ranges, and 200–250 m in the Beaverhead–Bitterroot Mountains. Additionally, slope-elevation profiles are flattened and hypsometry profiles show a peak in surface areas close to the ELA in the Lemhi Range and Beaverhead–Bitterroot Mountains, suggesting that small glaciers efficiently limit topography. The situation in the Lost River Range is less clear as a glacial signature is not apparent in either slope-elevation profiles or the hypsometry. In the rapidly uplifting Teton Range, the distribution of ELAs appears superficially to correspond to maximum topography, hypsometry, and slope-elevations profiles, with regression lines on maximum elevations offset by ~ 700 and ~ 350 m from the LGM and mean Quaternary ELA respectively. However, Grand Teton and Mt. Moran represent high-elevation “Teflon Peaks” that appear impervious to glacial erosion, formed in the hard crystalline bedrock at the core of the range. Glacier size and drainage density, rock uplift rate, and bedrock lithology are all important considerations when assessing the ability of glaciers to limit mountain range topography. In the northern Basin and Range, it is only under exceptional circumstances in the Teton Range that small glaciers appear to be incapable of imposing a fully efficient glacial buzzsaw, emphasising that high peaks represent an important caveat to the glacial buzzsaw hypothesis.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号