首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 31 毫秒
1.
The segment of the Interandean Depression of Ecuador between Ambato and Quito is characterized by an uppermost Pliocene–Quaternary basin, which is located between two N-S trending reverse basement faults: the Victoria Fault to the west, and the Pisayambo Fault to the east. The clear evidence of E-W shortening for the early Pleistocene (between 1.85 and 1.21 Ma) favours a compressional basin interpretation. The morphology (river deviations, landslides, folded and flexure structures) demonstrates continuous shortening during the late Quaternary. The late Pliocene-Quaternary shortening reached 3400 ± 600 m with a rate of 1.4 ± 0.3 mm yr−1. The E-W shortening is kinematically consistent with the current right-lateral reverse motion along the NE-SW trending Pallatanga Fault. The Quito-Ambato zone appears to act as a N-S restraining bend in a system of large right-lateral strike-slip faults. The compressive deformation which affects the Interandean Depression during the Pliocene is apparently coeval to the beginning subduction of very young oceanic lithosphere north of the Gulf of Guayaquil. The relatively buoyant new crust may have significantly increased the mechanical coupling in the subduction zone from Pliocene to Present.  相似文献   

2.
We identify and describe a series of east–west left-lateral strike-slip faults (named the Songino-Margats, the Hag Nuur, the Uliastay and the South Hangay fault systems) in the Hangay mountains of central Mongolia: an area that has little in the way of recorded seismicity and which is often considered as a rigid block within the India–Eurasia collision zone. The strike-slip faults of central Mongolia constitute a previously unrecognized hazard in this part of Mongolia. Each of the strike-slip faults show indications of late Quaternary activity in the form of aligned sequences of sag-ponds and pressure-ridges developed in alluvial deposits. Total bed-rock displacements of ∼3 km are measured on both the Songino-Margats and South Hangay fault systems. Bed-rock displacements of 11 km are observed across the Hag Nuur fault. Cumulative offset across the Uliastay fault systems are unknown but are unlikely to be large. We have no quantitative constraint on the age of faulting in the Hangay. The ≤20 km of cumulative slip on the Hangay faults might, at least in part, be inherited from earlier tectonic movements. Our observations show that, despite the almost complete absence of instrumentally recorded seismicity in the Hangay, this part of Mongolia is cut through by numerous distributed strike-slip faults that accommodate regional left-lateral shear between Siberia and China. Central Mongolia is thus an important component of the India–Eurasia collision that would be overlooked in models of the active tectonics based on the distribution of seismicity. We suggest that active faults such as those identified in the Hangay of Mongolia might exist in other, apparently aseismic, regions within continental collision zones.  相似文献   

3.
We present results from interpretation of a 3D seismic data set, located within the NW German sedimentary basin, as part of the Southern Permian Basin. We focused on the development of faults, the timing of deformation, the amount of displacement during multiphase deformation, strain partitioning, and the interaction between salt movements and faulting. We recognised the central fault zone of the study area to be the Aller-lineament, an important NW-trending fault zone within the superimposed Central European Basin System. From structural and sedimentological interpretations we derived the following evolution: (1) E–W extension during Permian rifting, (2) N–S extension within cover sediments, and E–W transtension affecting both basement and cover, contemporaneously during Late Triassic and Jurassic, (3) regional subsidence of the Lower Saxony Basin during Late Jurassic/Early Cretaceous, (4) N–S compression within cover sediments, and E–W transpression affecting both basement and cover, contemporaneously during Late Cretaceous/Early Tertiary inversion and (5) major subsidence and salt diapir rise during the Cenozoic. We suggest that the heterogeneity in distribution and timing of deformation in the working area was controlled by pre-existing faults and variations in salt thickness, which led to stress perturbations and therefore local strain partitioning. We observed coupling and decoupling between pre- and post-Zechstein salt units: in decoupled areas deformation occurred only within post-salt units, whereas in coupled areas deformation occurred in both post- and pre-salt units, and is characterised by strike-slip faulting.  相似文献   

4.
The Dien Bien Phu fault zone (DBP), orientated NNE to N, is one of the most seismically active zones in Indochina. In NW Vietnam, this zone is 160 km long and 6–10 km wide, cutting sedimentary and metamorphic rocks of the Late Proterozoic, Palaeozoic and Mesozoic age, as well as Palaeozoic and Late Triassic granitoids. Along the DBP relatively small, narrow pull-apart basins occur, the three largest of which (Chan Nua, Lai Chau and Dien Bien Phu) have been studied in detail. All of them are bounded by sinistral and sinistral-normal faults, responsible for offset and deflected drainage, presence of numerous shutter ridges and displaced terraces and alluvial fans. The normal component of motion is testified to by well-preserved triangular facets on fault scarps, highly elevated straths in river watergaps, overhanging tributary valleys, as well as high and uneven river-bed gradients.Our observations indicate a minimum recent sinistral offset ranging from 6–8 to 150 m for Holocene valleys to 1.2–9.75 km for middle–late Pleistocene valleys in different fault segments. The thickness of Quaternary sediments varies from 5–25 m in the Lai Chau area to some 130 m in the Dien Bien Phu Basin. In the Lai Chau Basin, the middle terrace (23 m) alluvia of Nam Na River at Muong Te bridge have been optically stimulated luminescence/single aliquot regenerative dose technique (OSL-SAR) dated at 23–40 to 13 ka. These sediments were normal-faulted by some 11 m after 13 ka, and mantled by vari-coloured slope loams, 8–12 m thick, containing colluvial wedges composed of angular debris. These wedges were probably formed due to at least three palaeoseismic events postdating 6 ka. In the Dien Bien Phu Basin, in turn, alluvium of the upper Holocene terraces has been OSL-SAR dated to 6.5–7 and 1.7–1.0 ka, whereas the younger (sub-recent) terrace sediments give ages of 0.5–0.2 ka.Displaced terraces and alluvial fans allow us to suppose that the sinistral and sinistral-normal faults bounding narrow pull-apart basins in the southern portion of the DBP fault reveal minimum rates of left-lateral strike-slip ranging from 0.6 to 2 mm/year in Holocene and 0.5–3.8 mm/year in Pleistocene times, whereas rates of Holocene uplift tend to attain 1 mm/year north of Lai Chau and 0.4–0.6 mm/year west of Dien Bien Phu. More precise estimations, however, are difficult to obtain due to poor age control of the displaced drainage. Rates of Quaternary strike-slip are comparable with those of the Red River fault; the sense of movement being, however, opposite. Taking into account the presence of two phases of Late Cenozoic strike-slip of contrasting sense of motion, as well as the geometry of the two fault zones, we hypothesize that the Red River and Dien Bien Phu faults are conjugate faults capable of generating relatively strong earthquakes in the future.  相似文献   

5.
We use teleseismic waveform analysis and locally recorded aftershock data to investigate the source processes of the 2004 Baladeh earthquake, which is the only substantial earthquake to have occurred in the central Alborz mountains of Iran in the modern instrumental era. The earthquake involved slip at 10–30 km depth, with a south-dipping aftershock zone also restricted to the range 10–30 km, which is unusually deep for Iran. These observations are consistent with co-seismic slip on a south-dipping thrust that projects to the surface at the sharp topographic front on the north side of the Alborz. This line is often called the Khazar Fault, and is assumed to be a south-dipping thrust which bounds the north side of the Alborz range and the south side of the South Caspian Basin, though its actual structure and significance are not well understood. The lack of shallower aftershocks may be due to the thick pile of saturated, overpressured sediments in the South Caspian basin that are being overthrust by the Alborz. A well-determined earthquake slip vector, in a direction different from the overall shortening direction across the range determined by GPS, confirms a spatial separation ('partitioning') of left-lateral strike-slip and thrust faulting in the Alborz. These strike-slip and thrust fault systems do not intersect within the seismogenic layer on the north side, though they may do so on the south. The earthquake affected the capital, Tehran, and reveals a seismic threat posed by earthquakes north of the Alborz, located on south-dipping thrusts, as well as by earthquakes on the south side of the range, closer to the city.  相似文献   

6.
Cozzi 《Basin Research》2000,12(2):133-146
The extensive shallow-water carbonate platform deposits of the Dolomia Principale Formation (Southern Alps, northern Italy) accumulated during the Late Triassic, a time of plate-scale reorganization and rifting. Synsedimentary tensional features such as fractures, neptunian dykes, normal faults, shatter breccias and laterally discordant intraformational breccias have been studied within a well-preserved platform-to-basin transition in the Monte Pramaggiore area (Carnian Prealps). These tensional features follow three preferential orientations: N–S, E–W and NE–SW. To fully explain these different arrays it is proposed that the study area experienced during the Late Triassic the waning rifting phase connected to the westward propagation of the NeoTethys (N–S extension) and the onset of the rifting phase that led in the Middle Jurassic to the opening of the Central Atlantic (E–W extension), with a contemporaneous reactivation of Early–Middle Triassic NE–SW-orientated faults. This palaeostress analysis reveals the good potential of tensional features as reliable palaeostress indicators.  相似文献   

7.
A network of 26 GPS sites was implemented in Iran and Northern Oman to measure displacements in this part of the Arabia–Eurasia collision zone. We present the GPS velocity field obtained from three surveys performed in 1999 September, 2001 October and 2005 September and the deduced strain tensor. This study refines previous studies inferred from only the two first surveys. Improvements are significant in NE Iran. The present-day shortening rate across the mountain belts of NE Iran is estimated to 5 ± 1 mm yr−1 at about N11°, 2 ± 1 mm yr−1 of NS shortening across the eastern Kopet Dag and 3 ± 1 mm yr−1 of NS shortening across Binalud and Kuh-e-Sorkh. Our GPS measurements emphasize the varying character of the Kopet Dag deformation between its southeastern part with prevailing thrusting at low rates and its northwestern part with dominant strike-slip activity at increasing rates. The principal axes of the horizontal strain tensor appears very homogeneous from the Zagros to the Alborz and the Kopet-Dag (N20°) and in eastern Iran (Makran and Lut block: N30°). Only NW Iran suffers a variable strain pattern which seems to wrap the Caspian basin. The strain tensor map underlines the existence of large homogeneous tectonic provinces in terms of style and amplitude of the deformation.  相似文献   

8.
A high-quality aeromagnetic survey of northern Brittany (line spacing 250  m; flight elevation 150  m) has been used to delineate the Lower Carboniferous St Malo dyke swarm in detail. The dyke swarm fans at its northern and southern ends, and is affected by N60° sinistral transcurrent faults. After restoration of these offsets, the full structure trends in a N–S direction. Small dykes are not imaged, and only one-third of the swarm is evidenced by magnetism. Gravity and magnetic modelling shows that the swarm overlies a single N–S elongated magma chamber.
  The distribution of K max inclinations of anisotropy of magnetic susceptibility (AMS) suggests that the dykes display a fanning magma flow in section. Computed K max inclinations are usually shallower than the measured geological dips, probably because the flow becomes more disturbed as the dyke becomes shallower. We observe that the mean susceptibility values increase when the magma flow is steeper than about 70°.
  A detailed cross-section of St Briac dyke, which is part of the St Malo dyke swarm, reveals that the main carrier of magnetization is magnetite in the centre of the dyke and magnetite + maghaemite on its rims. The emplacement of the St Malo dyke swarm could have been contemporaneous with the N60° shearing which displaced the dyke swarm by about 20  km. The dyke swarm is cut at its southern end by an E–W-orientated fault which probably acted during Late Carboniferous times.  相似文献   

9.
A thrust wedge with unusual geometry has developed under very oblique (50–60°) convergence between the Pacific and Australian Plates, along the 240‐km length of the Fiordland margin, New Zealand. The narrow (25 km‐wide) wedge comprises three overlapping components, lying west of the offshore section of the Alpine Fault, and straddles a change of > 30° in the regional strike of the plate boundary. Swath bathymetry, marine seismic reflection profiles, and dated samples together reveal the stratigraphy, structure, and evolution of the wedge and the underthrusting, continental, Caswell High (Australian Plate). Lateral variations in the composition and structure of the accretionary wedge, and the depth of the décollement thrust, result partly from variations in crustal structure and basement relief of the underthrust plate, and from associated variations in the thickness of turbidites available for frontal accretion. In the southern Fiordland Basin the underthrust plate is undergoing flexural uplift and extension, and a thick turbidite section is available for accretion. Along‐strike, a structurally elevated portion of the underthrust plate is very obliquely colliding with the central part of the accretionary wedge, the turbidite section available for accretion is condensed, and structural inversion occurs in the underthrust plate. Growth of the thrust wedge is inferred to have commenced in the Pliocene prior to 3 ± 1 Ma, but much of the wedge developed in the Quaternary. The spatial distribution of thrusting has varied through time, with most late Quaternary shortening occurring on structures within 10 km of the right‐stepping deformation front. Estimates of the magnitude and rates of deformation indicate that the wedge accommodates a significant component of the oblique convergence between the Pacific and Australian Plates. Shortening of up to 7.3 ± 1.4 km and 9.1 ± 1.8 km within the southern and central parts of the wedge, respectively, represent about 5–15% of the total 70–140 km of shortening predicted across the plate boundary since 6.4 Ma, and about 10–30% since 3 Ma. Late Quaternary shortening rates of the order of 1–5 mm yr?1, estimated across both the northern and southern parts of the wedge, represent about 10–50 and 5–21% of the total NUVEL‐1 A shortening across the plate boundary at these respective latitudes, implying that most shortening is occurring onshore. Furthermore, possible oblique‐slip thrusting within the wedge may be accommodating boundary‐parallel displacement of 0–6 mm yr?1, representing 0–17% of the total predicted within the plate boundary.  相似文献   

10.
The Parque Nacional Torres Del Paine and surrounding area in the Magallanes foreland basin in Chilean Patagonia is the site for numerous lakes fed by glaciers and rivers in the Andean highlands to the west. The lakes are elongate and have conspicuously systematic orientations. We hypothesize that the origin of the oriented lakes lies in the fault system, composed of a right-lateral strike-slip fault set oriented 58° from north, a left-lateral strike-slip set oriented 87°, and a thrust fault set oriented 167°, that exists within the underlying rocks. To test this hypothesis quantitatively, we determined the shape and orientation of the lakes by fitting each lake with an ellipse of appropriate aspect ratio, and later with multiple ellipses consistent with the composite geometry of some lakes. We then examined the faults in the area in terms of their kinematics, orientation and distribution. The distribution of lake orientations showed three distinct groups which appear to correspond to the three main fault groups. For lakes fitted with multiple ellipses, the difference in means between the right-lateral, left-lateral, and thrust faults and their corresponding groups of lakes are 3.05°, 1.57°, and 5.17°. Using a Kolmogorov–Smirnov (K–S) statistical test to compare the orientations of faults with respect to the lakes suggests that there is not a strongly significant difference between the fault orientations and the corresponding lake groups. These results indicate that the faults have a profound control on the orientation, shape, and distribution of the lakes. We attribute this to faults and their damage zones being weaker and therefore prone to a faster rate of erosion, and to stress perturbations associated with discontinuous faults resulting in localized high density fracturing and surface subsidence. These results have implications for lake and drainage system morphologies in other foreland basins along the Andes and other similar settings.  相似文献   

11.
The Stara Planina is an E–W-trending range within the Balkan belt in central Bulgaria. This topographically high mountain range was the site of Mesozoic through early Cenozoic thrusting and convergence, and its high topography is generally thought to have resulted from crustal shortening associated with those events. However, uplift of this belt appears to be much younger than the age of thrusting and correlates instead with the age of Pliocene–Quaternary normal faulting along the southern side of the range. Flexural modelling indicates the morphology of the range is consistent with flexural uplift of footwall rocks during Pliocene–Quaternary displacement on S-dipping normal faults bounding the south side of the mountains, provided that the effective elastic plate thickness of 12  km under the Moesian platform is reduced to about 3  km under the Stara Planina. This small value of elastic plate thickness under the Stara Planina is similar to values observed in the Basin and Range Province of the western United States, and suggests that weakening of the lithosphere is due to heating of the lithosphere during extension, perhaps to the point that large-scale flow of material is possible within the lower crust. Because weakening is observed to affect the Moesian lithosphere for ≈10  km beyond (north of) the surface expression of extension, this study suggests that processes within the uppermost mantle, such as convection, play an active role in the extension process. The results of this study also suggest that much of the topographic relief in thrust belts where convergence is accompanied by coeval extension in the upper plate (or 'back arc'), such as in the Apennines, may be a flexural response to unloading during normal faulting, rather than a direct response to crustal shortening in the thrust belt.  相似文献   

12.
ABSTRACT
Panamint Valley, in eastern California, is an extensional basin currently bounded by active, dextral-normal oblique-slip faults. There is considerable debate over the tectonic and topographic evolution of the valley. The least-studied structure, the Ash Hill fault, runs for some 50 km along the valley's western edge, and active strands of the fault continue south into the neighbouring Slate Range. Vertical displacement on the fault is valley-side up, creating topography that conflicts with the gross morphology of the valley itself. We use this topography, along with kinematic and geological markers, to constrain the Quaternary slip rate and orientation of the Ash Hill fault. The fault offsets all but the active channel deposits in the valley, and slickenlines indicate a strike-slip to dip-slip ratio of 3.5:1. An offset volcanic unit dated at 4 Ma provides a minimum slip rate of 0.3±0.1 mm yr−1, and a long-term strike-slip to dip-slip ratio of 5.2:1. Slip on the fault has warped a palaeolake shoreline within the valley. Simple elastic dislocation modelling of the vertical deformation of the shoreline suggests total fault slip of ≈60 m, valley-side up. The shoreline probably dates to 120–150 ka, implying a late Quaternary slip rate of 0.4–0.5 mm yr−1. We suggest two possible mechanisms for the apparently anomalous slip behaviour of the Ash Hill fault. The fault may be a listric structure related to the proposed low-angle fault underlying Panamint Valley. Alternatively, the Ash Hill fault is a high-angle fault, implying that the valley is currently bounded by high-angle dextral-slip faults. Lack of detailed subsurface information precludes any knowledge of the true relationships between the presently active faults.  相似文献   

13.
The Western Pyrenees presents a diffuse and moderate ( M ≤ 5.7) instrumental seismicity. It nevertheless historically suffered from strong earthquakes (I = IX MSK). The seismic sources of these events are not yet clearly identified. We focus on the Arudy (1980) epicentral area ( M = 5.1) and propose here the reactivation of early Cretaceous normal faults of the Iberian margin as a potential source. The late Cretaceous inversion of this basin, first in a left-lateral strike-slip mode and then in a more frontal convergence, resulted in a pop-up geometry. This flower structure attests of the presence of a deep crustal discontinuity.
The present-day geodynamic arrangement suggests that this accident is reactivated in a right lateral mode. This reactivation leads to a strain partitioning between the deep discontinuity that accommodates the lateral component of the motion and shallow thrusts, rooted on this discontinuity. These thrusts accommodate the shortening component of the strain. The distribution of the instrumental seismicity fits well the structural model of the Arudy basin. Whatever the compressive regional context, the structural behaviour of the system explains too the extensive stress tensor determined for the Arudy crisis if we interpret it in terms of strain ellipsoid. Indeed numerical modelling has shown that this concomitant activity of strike-slip and thrust faulting results in an extensive component that can rise 50 per cent of the finite strain.
We identify too a 25–30 km long potential seismic source for the Arudy area. The size of the structure and its potential reactivation in a strike-slip mode suggest that a maximum earthquake magnitude of ∼6.5 could be expected. The extrapolation of this model at the scale of the Western Pyrenees allows to propose other potential sources for major regional historical earthquakes.  相似文献   

14.
We use data from the Chile Argentina Geophysical Experiment (CHARGE) broad-band seismic deployment to refine past observations of the geometry and deformation within the subducting slab in the South American subduction zone between 30°S and 36°S. This region contains a zone of flat slab subduction where the subducting Nazca Plate flattens at a depth of ∼100 km and extends ∼300 km eastward before continuing its descent into the mantle. We use a grid-search multiple-event earthquake relocation technique to relocate 1098 events within the subducting slab and generate contours of the Wadati-Benioff zone. These contours reflect slab geometries from previous studies of intermediate-depth seismicity in this region with some small but important deviations. Our hypocentres indicate that the shallowest portion of the flat slab is associated with the inferred location of the subducting Juan Fernández Ridge at 31°S and that the slab deepens both to the south and the north of this region. We have also determined first motion focal mechanisms for ∼180 of the slab earthquakes. The subhorizontal T -axis solutions for these events are almost entirely consistent with a slab pull interpretation, especially when compared to our newly inferred slab geometry. Deviations of T -axes from the direction of slab dip may be explained with a gap within the subducting slab below 150 km in the vicinity of the transition from flat to normal subducting geometry around 33°S.  相似文献   

15.
The nature of the transition between the Zagros intra-continental collision and the Makran oceanic subduction is a matter of debate: either a major fault cutting the whole lithosphere or a more progressive transition associated with a shallow gently dipping fault restricted to the crust. Microearthquake seismicity located around the transition between the transition zone is restricted to the west of the Jaz-Murian depression and the Jiroft fault. No shallow micro-earthquakes seem to be related to the NNW–SSE trending Zendan–Minab–Palami active fault system. Most of the shallow seismicity is related either to the Zagros mountain belt, located in the west, or to the NS trending Sabzevaran–Jiroft fault system, located in the north. The depth of microearthquakes increases northeastwards to an unusually deep value (for the Zagros) of 40 km. Two dominant types of focal mechanisms are observed in this region: low-angle thrust faulting, mostly restricted to the lower crust, and strike-slip at shallow depths, both consistent with NS shortening. The 3-D inversion of P traveltimes suggests a high-velocity body dipping northeastwards to a depth of 25 km. This high-velocity body, probably related to the lower crust, is associated with the deepest earthquakes showing reverse faulting. We propose that the transition between the Zagros collision and the Makran subduction is not a sharp lithospheric-scale transform fault associated with the Zendan–Minab–Palami fault system. Instead it is a progressive transition located in the lower crust. The oblique collision results in partial partitioning between strike-slip and shortening components within the shallow brittle crust because of the weakness of the pre-existing Zendan–Minab–Palami faults.  相似文献   

16.
The opening of the Gulf of Aden and the Red Sea, and the collision of the Arabian plate with the jigsaw southern margin of the Anatolian plate have sheared the Sinai-Levant microplate off the NW part of the Arabian plate, and created the left-lateral Dead Sea (Levant) transform fault. The structural setting of the northern Levant region, particularly Lebanon and the Palmyrides, has been complicated by detachments along incompetent evaporitic horizons, roughly separating the post-Triassic succession from the underlying crustal material. The interpretation of the multiple source Werner deconvolution (MSWD) estimates of Bouguer gravity profiles, which were separately calculated for Syria and Lebanon, integrated with the available geological and geophysical results leads to the following interpretations: (1) the crust of Syria thickens southeastwards from approximately 32 km under the Al-Ghab Graben to >36 km under the Aleppo high, the Palmyride fold belt and the Rutbah high; (2) the lower-crustal (basaltic) layer thickens northwestwards from the hinterland to the Al-Ghab graben at the expense of the overlying andesitic layer; (3) the Mid-Beqa'a fault is delineated by the MSWD estimates in Lebanon and its NE extension in Syria; (4) the Phanerozoic section in the southwesternmost parts of the Palmyrides is ∼ 13 km thick, and the shortening there could exceed 30 km; (5) the Palmyride fold belt, and the Serghaya and Mid-Beqa'a faults could have accounted for about 70 km of the 105 km left-lateral displacement along the southern segment of the Dead Sea transform fault system, without transmission to the Syrian (northern) segment of the fault system; (6) the splitting of the Dead Sea transform fault in the Kuleh Depression into the Serghaya. Mid-Beqa'a, Yammouneh and Roum faults could be explained by the rotation of the detached post-Triassic succession over a stable deep left-lateral fracture of the Dead Sea fault in the underlying crustal material.  相似文献   

17.
A deep magnetotelluric sounding (MTS) investigation in the western part of the Gulf of Corinth has revealed a complex electrical image of the crustal structure. The geotectonic structure of the Parnassos unit and the Transition zone in the central Hellenides, overthrusting the Pindos zone both towards the west and towards the south, has been clearly identified by its higher resistivity and its intrinsic anisotropy related to the N–S strike of the Hellenides range. Subsequent N–S extension of the Gulf introduced another heterogeneous anisotropy characteristic that corresponds to E–W-trending normal faults on both sides of the Gulf. The 2-D modelling of the MTS results reveals the existence of a relatively conductive layer about 4 km thick at a depth greater than 10 km in the middle crust. It corresponds to a ductile detachment zone suggested by microseismic and seismic studies ( King et al . 1985 ; Rigo et al . 1996 ; Bernard et al . 1997a ). It may be attributed to the phyllite series lying between the allochthonous Hellenic nappes and the autochthonous Plattenkalk basement. Towards the east, under the Pangalos peninsula, approaching the internal Hellenides, the detachment zone could root deeply into the lower crust.
Some strong local electrical anomalies are observed, reaching the conductive layer in the middle crust, such as that under the Mamousia fault and under the front of the overthrust of the Transition zone on the Pindos zone. Other anomalies affect only the shallower zones such as that beneath the Helike fault and in the Psaromita peninsula. These shallower anomalies provide complementary information to the study of spatial and temporal variations of the seismic anisotropy in relation to the short- and long-term tectonic activity of the Gulf ( Bouin et al . 1996 ; Gamar et al . 1999 ).  相似文献   

18.
Focal mechanisms of small earthquakes with magnitudes of about 3 in the SE Brazilian shield are calculated using S / P amplitude ratios. Low attenuation ( Q p from 400 to 800) in the shield upper-crustal layers allowed sharp S arrivals to be recorded up to distances of 100 km. Besides P -wave polarities, SH -wave first motions were also used to constrain the nodal-plane orientations. Normal and reverse faulting mechanisms with strike-slip components were found. The inversion of four mechanisms to estimate the stress tensor indicated a strike-slip stress regime with roughly E–W-orientated σ 1 and N–S σ 3. Both the orientations and the shape factor ( φ =0.7) of the inverted stress are in excellent agreement with theoretical predictions for that part of Brazil from the driving-force model of Coblentz & Richardson (1996) . Good agreement with the nature of the stress, as well as its orientation, was also found for the model of Meijer (1995) . Both of these theoretical models include spreading stresses along the continent/ocean lithospheric transition. Because the earthquakes are more than 300 km from the continental shelf they should not be affected by the local flexural forces caused by sediment load in the marginal basins. The agreement between observed and theoretical stresses then confirms the importance of continental spreading forces in modelling intraplate stresses.  相似文献   

19.
Focal mechanisms determined from moment tensor inversion and first motion polarities of the Himalayan Nepal Tibet Seismic Experiment (HIMNT) coupled with previously published solutions show the Himalayan continental collision zone near eastern Nepal is deforming by a variety of styles of deformation. These styles include strike-slip, thrust and normal faulting in the upper and lower crust, but mostly strike-slip faulting near or below the crust–mantle boundary (Moho). One normal faulting earthquake from this experiment accommodates east–west extension beneath the Main Himalayan Thrust of the Lesser Himalaya while three upper crustal normal events on the southern Tibetan Plateau are consistent with east–west extension of the Tibetan crust. Strike-slip earthquakes near the Himalayan Moho at depths >60 km also absorb this continental collision. Shallow plunging P -axes and shallow plunging EW trending T -axes, proxies for the predominant strain orientations, show active shearing at focal depths ∼60–90 km beneath the High Himalaya and southern Tibetan Plateau. Beneath the southern Tibetan Plateau the plunge of the P -axes shift from vertical in the upper crust to mostly horizontal near the crust–mantle boundary, indicating that body forces may play larger role at shallower depths than at deeper depths where plate boundary forces may dominate.  相似文献   

20.
The landscape of today's central Iberian Peninsula has been shaped by ongoing tectonic activity since the Tertiary. This landscape comprises a mountain ridge trending E–W to NW–SE, the Central System, separating two regions of smooth topography: the basins of the rivers Duero and Tajo. In this study, we explore interrelationships between topography and tectonics in the central Iberian Peninsula. Regional landscape features were analysed using a digital elevation model (DEM). Slope gradients and slope orientations derived from the DEM were combined to describe topographic surface roughness. Topography trend-surfaces inferred from harmonic analysis were used to define regional topographic features. Low roughness emphasizes the smooth nature of the basins' topography, where surfaces of homogeneous slope gradient and orientation dominate. High roughness was associated with abrupt changes in gradient and slope orientation such as those affecting crests, valley bottoms and scarp edges present in the mountain chain and in some deep incised valleys in the basins. One of the applications of roughness mapping was its capacity to isolate incised valley segments. The area distribution of incised rivers shows their prevalence in the east. On a regional scale, the topographic surface can be described as a train of NE–SW undulations or waves of 20 km wavelength. These undulations undergo changes in direction and interruptions limited by N–S-trending breaks. E–W and NE–SW troughs and ridges clearly mark structural uplifts and depressions within the Central System. These structures are transverse to the compressive NW–SE stress field that controlled the deformation of the central Iberian Peninsula from the Neogene to the present. They represent the upper crustal folding that accommodates Alpine shortening. N–S breaks coincide with Late Miocene faults that control the basins' sedimentation. Further, associated palaeoseismic structures suggest the recent tectonic activity of N–S faults in the eastern part of the Tajo Basin. Apatite fission track analysis data for this area suggest the occurrence of a significant uplift episode from 7 to 10 Ma which induced the river incisions appearing in the roughness map. N–S and NE–SW faults could be seismogenic sources for the current moderate to low seismic activity of the east Tajo Basin and southeast Central System. Although N–S fault activity has already been established, we propose its significant contribution to shaping the landscape.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号