共查询到19条相似文献，搜索用时 122 毫秒
1.
Pi-SAR极化数据与K分布指数估算森林生物量与实验验证 总被引：1，自引：0，他引：1
用2002年和2003年日本Pi-SAR全极化数据,研究日本北海道苫小牧森林地区的森林生物量.雷达后向散射系数随森林生物量的增大而增大并迅速达到饱和,L波段雷达数据饱和点约为40t/hm2,X波段仅约为20t/hm2.在SAR数据统计分布中,K分布的指数参数在饱和点以上仍随生物量的增大而增大,并且HV极化方式时相关性最高.根据交叉极化数据K分布的指数参数与森林生物量的关系,本文估算了23个观测点的森林生物量,结果表明平均准确率为85%.因此该算法可以作为一种新的估算森林生物量的手段. 相似文献
2.
森林地上生物量的极化相干层析估计方法 总被引：2，自引：1，他引：1
基于微波的后向散射系数估计森林地上生物量(AGB)易受后向散射系数饱和的影响,而利用森林高度,根据生长方程估计AGB,却没有考虑和AGB密切相关的林分密度、树种组成、林层垂直分布等空间结构特征的作用,针对这些问题,提出一种基于极化相干层析(Polarization Coherence Tomography,PCT)技术的AGB估计方法。基于德国宇航局(DLR)机载SAR系统(ESAR)获取的特劳斯坦(Traunstein)试验区L-波段极化干涉SAR(PolInSAR)数据,通过对具有不同AGB水平的典型林分的相对反射率函数曲线的分析,定义了9个与AGB具有相关性的特征参数。然后基于20个林分的实测AGB数据,以林分尺度上这9个特征参数的平均值为自变量,以实测林分平均AGB为因变量,采用逐步回归分析法构建了AGB估测模型,并对该模型进行评价,对影响模型估计精度的因素进行分析,结果表明,由PCT提取的相对反射率函数特征参数对AGB很敏感,充分利用相对反射率函数信息可提高AGB估计精度。 相似文献
3.
魏雪梅 《武汉大学学报(信息科学版)》2019,44(9):1385-1390
以Landsat8 OLI（operational land imager）为遥感数据源，森林资源二类调查和地理国情数据为主要辅助数据，对森林地上生物量（aboveground biomass，AGB）进行了反演和估算。以安徽省金寨县的天然林为研究对象，通过计算覆盖研究区Landsat8 OLI的光谱、纹理和地形特征，利用森林资源二类调查、地理国情普查与监测和外业调查数据建立AGB定量反演模型，以此为基础分析了不同特征对于AGB估算的影响。结果表明，基于所采用的方法得到的金寨县的森林地上生物量，最优反演模型的实测值与估算值相对误差为0.708 718，均方根误差为1.318 983，精度较高。依据该模型计算得到金寨县的生物总量为4 723 728 530 t，结果与实际情况符合。该研究对AGB定量反演和研究所采用的方法对于大范围监测森林资源具有可用性。 相似文献
4.
机载LiDAR数据估算样地和单木尺度森林地上生物量 总被引：2，自引：0，他引：2
利用机载激光雷达点云数据,结合大量实测单木结构信息,分别从样地和单木尺度估算了森林地上生物量AGB。首先,利用局部最大值单木提取算法提取了每个样地内的单木结构参数,并针对样地和单木尺度分别计算了一组激光雷达变量。然后,利用激光雷达变量和地上生物量及其两者的对数形式,从样地和单木尺度分别构建了估算模型。最后,针对两种尺度估算过程中存在的不确定性进行了详细讨论。结果表明:(1)样地和单木尺度模型估算的森林地上生物量与地面实测值都具有明显的相关性,且对数模型估算效果要优于非对数模型;(2)样地尺度模型估算效果(R2=0.84,rRMSE=0.23)明显优于单木尺度模型(R2=0.61,rRMSE=0.46);(3)按树木类型分别进行估算可以提高单木地上生物量的估算精度;(4)不论是样地还是单木尺度地上生物量估算都存在一定的不确定性,与样地尺度相比,单木尺度估算过程的不确定性更大,这种不确定性主要来自单木识别过程。 相似文献
5.
红树林湿地植被生物量的雷达遥感估算 总被引：19，自引：0，他引：19
根据雷达后向散射系数建立了红树林湿地植被生物量的估算模型,并运用遗传算法确定其中非线性模型的最优参数.对比分析表明,雷达后向散射系数模型比NDVI模型在植被生物量估算中有更高的精度.使用NDVI指数有可能导致某些植被类型的生物量估算出现较大的误差.这是因为一些具有密集冠层的草本植被（例如互花米草等）有比红树林高得多的NDVI值.而雷达遥感所具有的侧视特点及一定的穿透能力能有效地获取植被的垂直信息,大大减低植被生物量估算的误差. 相似文献
6.
7.
针对经典的PolInSAR森林高度三阶段几何反演算法在单基线条件容易受到地体幅度比假设以及地形坡度影响的问题,从测量平差角度提出了基于S-RVoG模型的PolInSAR非线性复数最小二乘森林高度反演算法。该算法不再需要假设某一个极化通道地体幅度比为零,且采用考虑地形坡度影响的S-RVoG模型作为平差模型。为了验证算法,本文采用欧空局BioSAR2008项目提供的3景P波段极化干涉SAR数据进行两组单基线森林高度反演试验。结果表明,在单基线条件下,基于RVoG模型的非线性复数最小二乘算法反演结果优于三阶段几何反演算法,而基于S-RVoG模型的非线性复数最小二乘算法进一步提高反演精度,对于坡度较大区域（坡度>10°）,精度平均提高了18.48%。 相似文献
8.
结合树龄信息的遥感森林生态系统生物量制图 总被引：10，自引：0，他引：10
森林生态系统是陆地生态系统中的重要组成部分，其中的地上生物量（AGB，Aboveground Biomass）在全球气候变化和碳循环研究中起着重要的作用。本文利用ETM^＋遥感影像，首先建立了实测叶面积指数（LAI，Leaf Area Index）与实测生物量数据的回归关系，基于遥感叶面积指数图像得到初步地上生物量空间分布图；同时在短波植被指数（SWVI，Short Wave Vegetation Index）与实测树龄之间建立了回归关系，在此基础上得到了树龄空间分布图。然后通过将植被指数（VI，Vegetation Index），LAI，树龄等变量针对不同的树种类型进行逐步回归，得到了较好的回归模型，并结合土地利用／土地覆盖估算了贵州省黎平县的地上生物量，绘制了其空间分布图。统计结果显示：总体森林生态系统的AGB与LAI和RSR（Reduced Simple Ratio）之间有一定的相关关系（R^2=0．895）；杉木林的AGB与LAI和归一化植被指数（NDVI，Normalized Difference Vegetation Index）之间有较强的相关性（R^2=0．93）；针叶树种的LAI与年龄是AGB较好的估算因子（R^2=0．937）；阔叶林的AGB与年龄有一定的相关性（R^2=0．792）；混交林的AGB与LAI和SR（Simple Ratio）有较强的相关性（R^2=0．931）。结果表明，将树龄和土地覆盖／土地利用类型的信息加入到地上生物量估算模型的建立中，是一种改善利用多光谱遥感估算精度的较好的方法。结合土地覆盖／土地利用类型的高分辨率的树龄空间分布图，可为森林生态系统的可持续发展和管理提供科学的论据。 相似文献
9.
10.
大光斑激光雷达数据已广泛应用于森林冠层高度提取,但通常仅限于地形坡度小于20°的平缓地区。在地形坡度大于20°的陡峭山区,地形引起的波形展宽使得地面回波和植被回波信息混合在一起,给森林冠层高度提取带来巨大挑战。本文利用激光雷达回波模型和地形信息,提出了一种模型辅助的坡地森林冠层高度反演算法。该方法以激光雷达回波信号截止点为参考,定义了波形高度指数H50和H75,使用激光雷达回波模型与已知地形信息模拟裸地的激光雷达回波,将裸地回波信号截止点与森林激光雷达回波信号截止点对齐,利用裸地回波计算常用的波形相对高度指数RH50和RH75,对森林冠层高度进行反演。并与高斯波形分解法和波形参数法的反演结果进行了比较。研究结果表明:(1)利用所提取的波形指数RH50和RH75对胸高断面积加权平均高(Lorey’s height)进行了估算,在坡度小于20°时,高斯波形分解法、波形参数法和模型辅助法的估算结果与实测值线性拟合的相关系数(R2)分别为0.70,0.78和0.98,对应的均方根误差(RMSE)分别为2.90 m,2.48 m和0.60 m,模型辅助法略优于其他两种方法;(2)在坡度大于20°时,高斯波形分解法、波形参数法和模型辅助法的R2分别为0.14,0.28和0.97,相应的RMSE分别为4.93 m,4.53 m和0.81 m,模型辅助法明显优于其他两种方法;(3)在0°—40°时,模型辅助法对Lorey’s height估算结果与实测值的R2为0.97,RMSE为0.80 m。本研究提出的模型辅助法具有更好的地形适应性,在0°—40°的坡度范围内具备对坡地森林冠层高度反演的潜力。 相似文献
11.
Kiran Chand Thumaty Rakesh Fararoda Suresh Middinti Rajashekar Gopalakrishnan C. S. Jha V. K. Dadhwal 《Journal of the Indian Society of Remote Sensing》2016,44(1):31-39
Reliable and accurate estimates of tropical forest above ground biomass (AGB) are important to reduce uncertainties in carbon budgeting. In the present study we estimated AGB of central Indian deciduous forests of Madhya Pradesh (M.P.) state, India, using Advanced Land Observing Satellite – Phased Array type L-band Synthetic Aperture Radar (ALOS-PALSAR) L-band data of year 2010 in conjunction with field based AGB estimates using empirical models. Digital numbers of gridded 1?×?1° dual polarization (HH & HV) PALSAR mosaics for the study area were converted to normalized radar cross section (sigma naught - σ0). A total of 415 sampling plots (0.1 ha) data collected over the study area during 2009–10 was used in the present study. Plot-level AGB estimates using volume equations representative to the study area were computed using field inventory data. The plot-level AGB estimates were empirically modeled with the PALSAR backscatter information in HH, HV and their ratios from different forest types of the study area. The HV backscatter information showed better relation with field based AGB estimates with a coefficient of determination (R2) of 0.509 which was used to estimate spatial AGB of the study area. Results suggested a total AGB of 367.4 Mt for forests of M.P. state. Further, validation of the model was carried out using observed vs. predicted AGB estimates, which suggested a root mean square error (RMSE) of ±19.32 t/ha. The model reported robust and defensible relation for observed vs. predicted AGB values of the study area. 相似文献
12.
Accurate estimation of forest aboveground biomass (AGB) using remote sensing is a requisite for monitoring, reporting and verification (MRV) system of the United Nations Programme on Reducing Emissions from Deforestation and Forest Degradation. However, attaining high accuracy remains a great challenge in the diverse tropical forests. Among available technologies, l-band Synthetic Aperture Radar (SAR) estimates AGB with reasonably high accuracy in the terrestrial tropical forests. Nevertheless, the accuracy is relatively low in the mangrove forests. In this context, the study was carried out to model and map AGB using backscatter coefficients of Advanced Land Observing Satellite-2 (ALOS-2) Phased Array l-band SAR-2 (PALSAR-2) in part of the restored mangrove forest at Mahakam Delta, Indonesia. PALSAR-2 data was acquired with image scene observation during the peak low tide on 30 July 2018 from Japan Aerospace Exploration Agency. The forest parameters namely tree height and diameter at breast height were measured from 71 field plots in September-October 2018. The parameters were used in mangrove allometry to calculate the field AGB. Finally, HV polarized backscatter coefficients of PALSAR-2 were used to model AGB using linear regression. The model demonstrated a comparatively high performance using three distinct methods viz. independent validation (R2 of 0.89 and RMSE of 23.16 tons ha−1), random k-fold cross validation (R2 of 0.89 and RMSE of 24.59 tons ha−1) and leave location out cross validation (LLO CV) (R2 of 0.88 and RMSE of 24.05 tons ha−1). The high accuracy of the LLO CV indicates no spatial overfitting in the model. Thus, the model based on LLO CV was used to map AGB in the study area. This is the first study that successfully obtains high accuracy in modeling AGB in the mangrove forest. Therefore, it offers a significant contribution to the MRV mechanism for monitoring mangrove forests in the tropics and sub-tropics. 相似文献
13.
R. Suraj Reddy G. Rajashekar C. S. Jha V. K. Dadhwal Raphel Pelissier Pierre Couteron 《Journal of the Indian Society of Remote Sensing》2017,45(4):657-665
Assessment of above ground forest biomass (AGB) is essential in carbon modelling studies to provide mitigation strategies as demonstrated by reducing emissions from deforestation and forest degradation. Several researchers have demonstrated the use of remote sensing data in spatial AGB estimation, in terms of spectral and radar backscatter based approaches at a landscape scale with several known limitations. However, these methods lacked the predictive ability at high biomass ranges due to saturation. The current study addresses the problem of saturation at high biomass ranges using canopy textural metric from high resolution optical data. Fourier transform based textural ordination (FOTO) technique, which involves deriving radial spectrum information via 2D fast Fourier transform and ordination through principal component analysis was used for characterizing the textural properties of forest canopies. In the current study, plot level estimated AGB from 15 (1 ha) plots was used to relate with texture derived information from very high resolution datasets (viz., IKONOS and Cartosat-1). In addition to the estimation of high biomass ranges, one of the prime objective of the current study is to understand the effects of spatial resolution on deriving textural-AGB relationship from 2.5 m IRS Cartosat data (Cartosat-A, viewing angle = ?5°) to that of IKONOS imagery with near nadir view. Further, since texture is impacted by several illumination geometry issues, the effect of viewing geometry on the relationship was evaluated using Cartosat-F (Viewing angle = 26°) imagery. The results show that the FOTO method using stereo Cartosat (A and F) images at 2.5 m resolution are able to perform well in characterizing high AGB values since the texture-biomass relationship is only subjected to 18 % relative error to that of 15 % in case of IKONOS and could aid in reduction of uncertainty in AGB estimation at a large landscape levels. 相似文献
14.
为克服传统农田土地平整测量方法耗时费力的特点，提出采用LiDAR技术对农田地形进行重建的探索性研究。通过HDL-32E型激光雷达等搭建了系统的硬件平台，应用C++语言编写了系统数据的采集程序；在此基础上对激光雷达所采集数据进行了标定，研究了农田地形重建系统中不同坐标系的转换方法；同时基于最小值去噪法设计了更适用于农田地形点云去噪的均值限差去噪法。通过对比在农田起伏较大区域不同坡度范围内RTK与激光雷达所测单元个数，对系统精度进行了评价；最后实现了车载农田地形重建系统的界面显示、应用与精度评估。结果表明，在10°~15°、25°~30°大坡度范围内激光雷达所获农田地形更为丰富，精度更高。该方法重建的农田地形模型点云数据和原始农田地形点云数据投影面积逼近度可达93%，验证了本文研究方法应用于农田地形环境重建的可行性，同时为今后的土地精细平整工作提供了理论参考与依据。 相似文献
15.
Synthetic Aperture Radar (SAR) texture has been demonstrated to have the potential to improve forest biomass estimation using backscatter. However, forests are 3D objects with a vertical structure. The strong penetration of SAR signals means that each pixel contains the contributions of all the scatterers inside the forest canopy, especially for the P-band. Consequently, the traditional texture derived from SAR images is affected by forest vertical heterogeneity, although the influence on texture-based biomass estimation has not yet been explicitly explored. To separate and explore the influence of forest vertical heterogeneity, we introduced the SAR tomography technique into the traditional texture analysis, aiming to explore whether TomoSAR could improve the performance of texture-based aboveground biomass (AGB) estimation and whether texture plus tomographic backscatter could further improve the TomoSAR-based AGB estimation. Based on the P-band TomoSAR dataset from TropiSAR 2009 at two different sites, the results show that ground backscatter variance dominated the texture features of the original SAR image and reduced the biomass estimation accuracy. The texture from upper vegetation layers presented a stronger correlation with forest biomass. Texture successfully improved tomographic backscatter-based biomass estimation, and the texture from upper vegetation layers made AGB models much more transferable between different sites. In addition, the correlation between texture indices varied greatly among different tomographic heights. The texture from the 10 to 30 m layers was able to provide more independent information than the other layers and the original images, which helped to improve the backscatter-based AGB estimation. 相似文献
16.
Wenmei Li Erxue Chen Zengyuan Li Wangfei Zhang Chang Jiang 《Journal of the Indian Society of Remote Sensing》2016,44(1):41-48
Tomo-SAR technique has been used for hemi-boreal forest height and further forest biomass estimation through allometric equation. Backscattering coefficient especially in longer wavelength (L- or P-band) is thought as a useful parameter for hemi-boreal forest biomass retrieval. The aim of this paper is to assess the performance of vertical backscattering power and backscattering coefficient for hemi-boreal forest aboveground biomass (AGB) estimation with airborne P-band data. The test site locates in southern Sweden called Remningstorp test site, and the in-situ forest AGB ranges from 14 t/ha to 245 t/ha at stand level. Multi-baseline P-band Pol-InSAR data in repeat-path mode collected during March and May in 2007 at Remningstorp test site was used. We found that the correlation coefficient (R) between backscattering coefficient of P-band HH polarization and the in-situ forest biomass reached 0.87. The R for P-band VV backscattering power at 5 m is 0.71 and 10 m is 0.72. Backscattering coefficient in HH polarization and vertical backscattering power at 5 m and 10 m were applied to construct a model for hemi-boreal forest AGB estimation by backward step-wise regression and cross-validation approach. The results showed that the estimated forest AGB ranges from 19 to 240 t/ha, and the constructed model obtained a higher R and smaller RMSE, the value of R is 0.91, RMSE is 30.43 t/ha at Remningstorp test site. 相似文献
17.
The Above-Ground Biomass (AGB) is a key parameter used for the modeling of the carbon cycle. The aim of this study is to make an experimental assessment of the sensitivity of Global Navigation Satellite System (GNSS) reflected signals to forest AGB. This is based on the analysis of the data recorded during several GLORI airborne campaigns in June and July 2015, over the Landes Forest (France). Ground truth measurements of tree height, density and diameter at breast height (DBH), as well as AGB, were carried out for 100 maritime pine forest plots of various ages. The GNSS-R data were used to obtain the right-left (ΓRL) and right-right (ΓRR) reflectivity observables, which are geo-referenced in accordance with the known positions of relevant GPS satellites and the airborne receiver. The correlations between forest AGB and the GNSS-R observables yield the highest sensitivity at high elevation angles (70°-90°). In this case, for (ΓRL) and the reflectivity polarization ratio (PR = ΓRL/ΓRR) estimated with a coherent integration time Tc = 20 ms, the coefficients of determination R2 are equal to 0.67 and 0.51, with a sensitivity of −0.051 dB/[106g (Mg) ha−1], and −0.053 dB/[Mg ha−1], respectively. The relationships between AGB and the observables are confirmed through the use of a 5-fold cross validation approach, with several different coherent integration times. 相似文献
18.
The Lonar crater in India provides an ample opportunity to in-depth analysis of crater morphology. This paper focuses on the topographical mapping of Lonar crater with detailed study on slope, regional analysis and its rim signature. The slope of the crater (inner wall region) reveals that the northern part is steep and southern part is gentle, while, on the outer region, the northern part is flat and the later shows abrupt variations. On regional topographical mapping (~4 crater radii) around the Lonar crater, it was observed that the terrain descends from NE to SW. An elevation difference of ~20 m was observed between the N and S part, infers that the pre-impact terrain is a descending one. The crater northern rim was elevated ~10 m to ~15 m, whereas southern rim was elevated ~50 m above the average regional surface. We found that the topographically lower southern region was abruptly changed and the rim has been uplifted to an elevation of ~604 m above the average regional elevation (~555 m). This result infers that the post-impact topography was abruptly altered along the S side. The crater rim signature extracted from highest point all along the rim shows a near flat surface on north, whereas the V-shaped protrusion shows active erosion and degradation on the west. Thus, DEM based topographic study has opened a new insight about the Lonar crater, from differential rim uplift, alteration along the rim and finally revealed that the impact crater formed on a descending terrain. 相似文献
19.
The demand for precise mapping and monitoring of forest resources, such as above ground biomass (AGB), has increased rapidly. National accounting and monitoring of AGB requires regularly updated information based on consistent methods. While remote sensing technologies such as airborne laser scanning (ALS) and digital aerial photogrammetry (DAP) have been shown to deliver the necessary 3D spatial data for AGB mapping, the capacity of repeat acquisition, remotely sensed, vegetation structure data for AGB monitoring has received less attention. Here, we use vegetation height models (VHMs) derived from repeat acquisition DAP data (with ALS terrain correction) to map and monitor woody AGB dynamics across Switzerland over 35 years (1983-2017 inclusive), using a linear least-squares regression approach. We demonstrate a consistent relationship between canopy height derived from DAP and field-based NFI measures of woody AGB across four inventory periods. Over the environmentally heterogeneous area of Switzerland, our models have a comparable predictive performance (R2 = 0.54) to previous work predicting AGB based on ALS metrics. Pearson correlation coefficients between measured and predicted changes in woody AGB over time increased with shorter time gaps (< 2 years) between image capture and field-based measurements, ranging between 0.76 and 0.34. A close temporal match between field surveys and remote sensing data acquisition is thus key to reliable mapping and monitoring of AGB dynamics, especially in areas where forest management and natural disturbances trigger relatively fast canopy dynamics. We show that VHMs derived from repeat DAP capture constitute a cost effective and reliable approach to map and monitor changes in woody AGB at a national extent and can provide an important information source for national carbon accounting and monitoring of ecosystem service provisioning. 相似文献