共查询到20条相似文献,搜索用时 93 毫秒
1.
本文主要讨论了利用空间投影一空间斜墨卡托(SOM)投影进行卫星遥感图像精纠正与定位,解决缺少控制点地区卫星遥感图像精纠正与定位问题,并根据正反算公式讨论了卫星遥感图像纠正的空间投影数学基础。 相似文献
2.
3.
SAR图像纠正的数学模型 总被引:3,自引:0,他引:3
本文对G.Konecny等提出的平距投影的合成孔径雷达(SAR)图像纠正的数学模型给子证明,并指出其近似性。随后推导了斜距投影的雷达图像纠正的数学模型,且以雷达图像的模拟数据,验证了该数学模型与G.Konecny的数学模型具有相同的数学精度。 相似文献
4.
MapInfo中的坐标系与地图数据的转换 总被引:9,自引:0,他引:9
本文就MapInfo系统中地图投影坐标系和有关GIS数据的转换作了一些有益的探讨,并就目前比较多的各种地图数据转换成经纬度投影坐标(例如:WGS84投影坐标)进行了尝试和研究,以供各位读者参考,也希望相关方面的专业人士能给予纠正及补充。 相似文献
5.
6.
本文以PC-ARC/INFO地理信息系统为例,围绕着多重数据空间叠置分析时应使多种图形保持相同的投影坐标体系这一问题展开了讨论,首先剖析了我国普遍采用的高斯投影与通用横轴墨卡托投影(UTM)的异同步及其关系,提出了高斯投影与其它投影之间的相与转换方法,并对投影结果进行了分析和讨论。 相似文献
7.
通过实际数据,对高斯投影长度变形问题进行了分析,简单介绍采用抵偿高程投影面、任意带高斯投影和具有抵偿高程投影面的任意带高斯投影的方法,能有效地实现控制高斯投影两种长度变形的相互抵偿,达到了控制高斯投影长度变形影响的目的。 相似文献
8.
空间Gauss—Kruger投影研究 总被引:1,自引:0,他引:1
研究了适合于星下点轨迹是某一经线的卫星图像数据投影选择的空间Gauss—Kruger投影,推导了空间Gauss—Kruger投影公式及其变形情况,并证明了该投影是等角空间投影,最后给出了算例。 相似文献
9.
等差分纬线多圆锥投影没有直接的投影转换公式,通过已有公式与部分参考坐标详细推导出正解转换公式,并计算规则经纬间隔控制点坐标。介绍在ArcGIS Desktop中使用控制点进行栅格纠正,实现栅格数据投影转换的方法,以及该方法在实际应用中的各项优势。 相似文献
10.
11.
12.
13.
In this paper, we develop a multiregion epidemic model in order to provide the basic information on local HIV epidemic states
in Japan. By considering the previous efforts of national epidemic projections in Japan, we statistically calibrate a model
by employing an estimation method that allows the inclusion of geographically varying parameters. Using this model, we present
a geographical projection of local epidemics until 2015 by examining geographical variations in future epidemic growth and
spatial relationships in HIV transmission. We also discuss the implications of planning preventive measures and improvement
in the Japanese HIV/AIDS surveillance system based on analytical results. 相似文献
14.
Development of a Coordinate Transformation method for direct georeferencing in map projection frames
This paper develops a novel Coordinate Transformation method (CT-method), with which the orientation angles (roll, pitch, heading) of the local tangent frame of the GPS/INS system are transformed into those (omega, phi, kappa) of the map projection frame for direct georeferencing (DG). Especially, the orientation angles in the map projection frame were derived from a sequence of coordinate transformations. The effectiveness of orientation angles transformation was verified through comparing with DG results obtained from conventional methods (Legat method1 and POSPac method2) using empirical data. Moreover, the CT-method was also validated with simulated data. One advantage of the proposed method is that the orientation angles can be acquired simultaneously while calculating position elements of exterior orientation (EO) parameters and auxiliary points coordinates by coordinate transformation.These three methods were demonstrated and compared using empirical data. Empirical results show that the CT-method is both as sound and effective as Legat method. Compared with POSPac method, the CT-method is more suitable for calculating EO parameters for DG in map projection frames. DG accuracy of the CT-method and Legat method are at the same level. DG results of all these three methods have systematic errors in height due to inconsistent length projection distortion in the vertical and horizontal components, and these errors can be significantly reduced using the EO height correction technique in Legat’s approach. Similar to the results obtained with empirical data, the effectiveness of the CT-method was also proved with simulated data. 相似文献
15.
16.
17.
根据两种方式深入探讨了带属性的MapInfo数据的坐标转换方法:一种通过VC和MapX编程调入".tab"文件,实现Window窗口界面化的输入和显示方式,通过输入七参数或四参数,快速实现坐标系之间的一系列转换;另一种是在.prj文件中定义坐标系,通过改变投影来进行转换.这两种方式最终都以WGS-84坐标转换为BJ54... 相似文献
18.
CCD阵列相机的几何标定 总被引:1,自引:0,他引:1
提出了一种CCD阵列相机几何标定的多级处理方法。根据几何成像原理,该方法把相机内外部参数分开求解;而在内部参数标定过程中,又把各内部参数的标定分阶段进行。这种标定方法是建立在严格的几何约束关系之上的,它克服了传统的整体参数标定方法中各未知参数的相关性影响,从而保证了标定结果的数据一致性和精度。实验验证了本文方法的优越性。 相似文献
19.
为解决网络地理信息应用二、三维一体化显示需要,通常做法是处理并存储两套不同投影的地图瓦片数据,一套采用Web墨卡托投影,面向二维地图应用;一套采用经纬度坐标,面向三维地图应用。这在一定程度上降低数据处理效率、浪费存储资源。文中提出一种改进Web墨卡托地图投影方法,并设计一种面向影像地图和DEM数据的瓦片化方法。方法生成的影像地图瓦片数据既能同时面向二维地图和三维可视化场景使用,又有效解决Web墨卡托投影不支持高纬度地区栅格地图表达的缺陷。将新型的地图投影和数据模型通过瓦片地图服务系统进行验证,证明这种新改进的投影和影像,以及DEM瓦片化方法具备较高的实用性。 相似文献
20.
针对地面激光雷达点云和数码光学影像非同源异质数据自动配准困难的问题,本文提出了基于互信息的两种数据同名特征高精度自动提取的方法。首先,把点云数据生成中心平面投影的反射强度图像和基于RGB信息的彩色图像,应用点云彩色图像和数码光学影像的匹配,确定点云与影像的粗配准参数;然后,对反射强度图像进行特征提取,应用粗配准参数确定其在数码光学影像上的初始位置,应用互信息实现非同源数据的高精度匹配;最后,应用罗德里格矩阵和选权迭代方法计算高精度配准参数,生成三维彩色模型。试验证明,本文方法可以解决地面激光点云和数码光学影像非同源异质数据的配准问题,具有一定的研究和应用价值。 相似文献