首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 424 毫秒
1.
Single, interferometric dual, and quad-polarization mode data were evaluated for the characterization and classification of seven land use classes in an area with shifting cultivation practices located in the Eastern Amazon (Brazil). The Advanced Land-Observing Satellite (ALOS) Phased Array L-band Synthetic Aperture Radar (PALSAR) data were acquired during a six month interval. A clear-sky Landsat-5/TM image acquired at the same period was used as additional ground reference and as ancillary input data in the classification scheme. We evaluated backscattering intensity, polarimetric features, interferometric coherence and texture parameters for classification purposes using support vector machines (SVM) and feature selection. Results showed that the forest classes were characterized by low temporal backscattering intensity variability, low coherence and high entropy. Quad polarization mode performed better than dual and single polarizations but overall accuracies remain low and were affected by precipitation events on the date and prior SAR date acquisition. Misclassifications were reduced by integrating Landsat data and an overall accuracy of 85% was attained. The integration of Landsat to both quad and dual polarization modes showed similarity at the 5% significance level. SVM was not affected by SAR dimensionality and feature selection technique reveals that co-polarized channels as well as SAR derived parameters such as Alpha-Entropy decomposition were important ranked features after Landsat’ near-infrared and green bands. We show that in absence of Landsat data, polarimetric features extracted from quad-polarization L-band increase classification accuracies when compared to single and dual polarization alone. We argue that the joint analysis of SAR and their derived parameters with optical data performs even better and thus encourage the further development of joint techniques under the Reducing Emissions from Deforestation and Degradation (REDD) mechanism.  相似文献   

2.
Biodiversity maps are crucial to conservation management. The present study assesses the accuracy of detecting tree diversity in an Italian forest site by combining mid-resolution images from Landsat-TM or Advanced Land Observation Satellite (ALOS)’s Advanced Visible and Near Infrared Radiometer type 2 (AVNIR-2) sensors with environmental data namely elevation, slope, aspect and solar radiation in an artificial Neural Network (NN) classifier. The map accuracies obtained for Landsat-TM and ALOS images are 60 % and 53 % respectively. Use of environmental data increases accuracies to 91 % and 81 % respectively. Landsat-TM detects tree diversity more accurately than ALOS. Both the coarser pixel size and finer spectral resolution of Landsat-TM contributed to its higher accuracy.  相似文献   

3.
Synthetic aperture radar (SAR) is an important alternative to optical remote sensing due to its ability to acquire data regardless of weather conditions and day/night cycle. The Phased Array type L-band SAR (PALSAR) onboard the Advanced Land Observing Satellite (ALOS) provided new opportunities for vegetation and land cover mapping. Most previous studies employing PALSAR investigated the use of one or two feature types (e.g. intensity, coherence); however, little effort has been devoted to assessing the simultaneous integration of multiple types of features. In this study, we bridged this gap by evaluating the potential of using numerous metrics expressing four feature types: intensity, polarimetric scattering, interferometric coherence and spatial texture. Our case study was conducted in Central New York State, USA using multitemporal PALSAR imagery from 2010. The land cover classification implemented an ensemble learning algorithm, namely random forest. Accuracies of each classified map produced from different combinations of features were assessed on a pixel-by-pixel basis using validation data obtained from a stratified random sample. Among the different combinations of feature types evaluated, intensity was the most indispensable because intensity was included in all of the highest accuracy scenarios. However, relative to using only intensity metrics, combining all four feature types increased overall accuracy by 7%. Producer’s and user’s accuracies of the four vegetation classes improved considerably for the best performing combination of features when compared to classifications using only a single feature type.  相似文献   

4.
Woody canopy cover (CC) is the simplest two dimensional metric for assessing the presence of the woody component in savannahs, but detailed validated maps are not currently available in southern African savannahs. A number of international EO programs (including in savannah landscapes) advocate and use optical LandSAT imagery for regional to country-wide mapping of woody canopy cover. However, previous research has shown that L-band Synthetic Aperture Radar (SAR) provides good performance at retrieving woody canopy cover in southern African savannahs. This study’s objective was to evaluate, compare and use in combination L-band ALOS PALSAR and LandSAT-5 TM, in a Random Forest environment, to assess the benefits of using LandSAT compared to ALOS PALSAR. Additional objectives saw the testing of LandSAT-5 image seasonality, spectral vegetation indices and image textures for improved CC modelling. Results showed that LandSAT-5 imagery acquired in the summer and autumn seasons yielded the highest single season modelling accuracies (R2 between 0.47 and 0.65), depending on the year but the combination of multi-seasonal images yielded higher accuracies (R2 between 0.57 and 0.72). The derivation of spectral vegetation indices and image textures and their combinations with optical reflectance bands provided minimal improvement with no optical-only result exceeding the winter SAR L-band backscatter alone results (R2 of ∼0.8). The integration of seasonally appropriate LandSAT-5 image reflectance and L-band HH and HV backscatter data does provide a significant improvement for CC modelling at the higher end of the model performance (R2 between 0.83 and 0.88), but we conclude that L-band only based CC modelling be recommended for South African regions.  相似文献   

5.
Hot spot detection with satellite images, especially with synthetic aperture radar (SAR) images is still a challenging task. Several researchers have used TM/optical data for identification of hot spot but the use of SAR data is very limited for this type of application. The fusion of SAR data with TM/optical data may add additional information which in turn will lead for enhancement of detection capability of the hot spot. Therefore, this study explores the possibility of fusion of Moderate Resolution Imaging Spectroradiometer (MODIS) and Phased Array L-band Synthetic Aperture Radar (PALSAR) satellite images for the hot spot detection. Image fusion is emerging as a powerful tool where information of various sensors can be used for obtaining better results. For this purpose, vegetation greenness and roughness information which is obtained from MODIS and PALSAR satellite images, respectively, are used for fusion, and then, a contextual-based thresholding algorithm is applied to the fused image for hot spot detection. The proposed approach comprises of two steps: (1) application of genetic algorithm-based scheme for image fusion of MODIS and PALSAR satellite images, and (2) classification of the fused image as either hot spot or non-hot spot pixels by employing a contextual thresholding technique. The algorithm is tested over the Jharia Coal Field region of India, where hot spot is one of the major problems and it is observed that the proposed thresholding technique classifies the each pixel of the fused image into two categories: hot spot and non-hot spot and the proposed approach detects the hot spot with better accuracy and less false alarm.  相似文献   

6.
Image classification from remote sensing is becoming increasingly urgent for monitoring environmental changes. Exploring effective algorithms to increase classification accuracy is critical. This paper explores the use of multispectral HJ1B and ALOS (Advanced Land Observing Satellite) PALSAR L-band (Phased Array type L-band Synthetic Aperture Radar) for land cover classification using learning-based algorithms. Pixel-based and object-based image analysis approaches for classifying HJ1B data and the HJ1B and ALOS/PALSAR fused-images were compared using two machine learning algorithms, support vector machine (SVM) and random forest (RF), to test which algorithm can achieve the best classification accuracy in arid and semiarid regions. The overall accuracies of the pixel-based (Fused data: 79.0%; HJ1B data: 81.46%) and object-based classifications (Fused data: 80.0%; HJ1B data: 76.9%) were relatively close when using the SVM classifier. The pixel-based classification achieved a high overall accuracy (85.5%) using the RF algorithm for classifying the fused data, whereas the RF classifier using the object-based image analysis produced a lower overall accuracy (70.2%). The study demonstrates that the pixel-based classification utilized fewer variables and performed relatively better than the object-based classification using HJ1B imagery and the fused data. Generally, the integration of the HJ1B and ALOS/PALSAR imagery can improve the overall accuracy of 5.7% using the pixel-based image analysis and RF classifier.  相似文献   

7.
This research aimed to explore the fusion of multispectral optical SPOT data with microwave L-band ALOS PALSAR and C-band RADARSAT-1 data for a detailed land use/cover mapping to find out the individual contributions of different wavelengths. Many fusion approaches have been implemented and analyzed for various applications using different remote sensing images. However, the fusion methods have conflict in the context of land use/cover (LULC) mapping using optical and synthetic aperture radar (SAR) images together. In this research two SAR images ALOS PALSAR and RADARSAT-1 were fused with SPOT data. Although, both SAR data were gathered in same polarization, and had same ground resolution, they differ in wavelengths. As different data fusion methods, intensity hue saturation (IHS), principal component analysis, discrete wavelet transformation, high pass frequency (HPF), and Ehlers, were performed and compared. For the quality analyses, visual interpretation was applied as a qualitative analysis, and spectral quality metrics of the fused images, such as correlation coefficient (CC) and universal image quality index (UIQI) were applied as a quantitative analysis. Furthermore, multispectral SPOT image and SAR fused images were classified with Maximum Likelihood Classification (MLC) method for the evaluation of their efficiencies. Ehlers gave the best score in the quality analysis and for the accuracy of LULC on LULC mapping of PALSAR and RADARSAT images. The results showed that the HPF method is in the second place with an increased thematic mapping accuracy. IHS had the worse results in all analyses. Overall, it is indicated that Ehlers method is a powerful technique to improve the LULC classification.  相似文献   

8.
Many data fusion methods are available, but it is poorly understood which fusion method is suitable for integrating Landsat Thematic Mapper (TM) and radar data for land cover classification. This research explores the integration of Landsat TM and radar images (i.e., ALOS PALSAR L-band and RADARSAT-2 C-band) for land cover classification in a moist tropical region of the Brazilian Amazon. Different data fusion methods—principal component analysis (PCA), wavelet-merging technique (Wavelet), high-pass filter resolution-merging (HPF), and normalized multiplication (NMM)—were explored. Land cover classification was conducted with maximum likelihood classification based on different scenarios. This research indicates that individual radar data yield much poorer land cover classifications than TM data, and PALSAR L-band data perform relatively better than RADARSAT-2 C-band data. Compared to the TM data, the Wavelet multisensor fusion improved overall classification by 3.3%-5.7%, HPF performed similarly, but PCA and NMM reduced overall classification accuracy by 5.1%-6.1% and 7.6%-12.7%, respectively. Different polarization options, such as HH and HV, work similarly when used in data fusion. This research underscores the importance of selecting a suitable data fusion method that can preserve spectral fidelity while improving spatial resolution.  相似文献   

9.
Temporal changes in the normalized difference vegetation index (NDVI) have been widely used in vegetation mapping due to the usefulness of NDVI data in distinguishing characteristic seasonal differences in the phenology of greenness of vegetation cover. Research has also shown that NDVI provides potential to derive meaningful metrics that describe ecosystem functions. In this paper, we have applied both unsupervised “k-means” classification and supervised minimum distance classification as derived from temporal changes in NDVI measured in 1997 along the North Eastern China Transect (NECT), and we have also utilized the same two classification methods together with NDVI-derived metrics, namely maximum NDVI, mean NDVI, NDVI amplitude, NDVI threshold, total length of growing season, fraction of growing season during greenup, rate of greenup, rate of senescence, integrated NDVI during the growing season, and integrated NDVI during greenup/integrated NDVI during senescence to map vegetation. The main objectives of this study are: (1) to test the relative performance of NDVI temporal profile metrics and NDVI-derived metrics for vegetation cover discrimination in NECT; (2) to test the relative performance of unsupervised (k-means) and supervised (minimum distance) methods for vegetation mapping; (3) to test the accuracy of the IGBP-DIS released land cover map for NECT; (4) to provide an up-to-date vegetation map for NECT. The results suggest that the classifications based on NDVI temporal profile metrics have higher accuracies than those based on any other metrics, such as NDVI-derived metrics, or all (NDVI temporal profile metrics + NDVI-derived metrics), or 15 metrics (NDVI temporal profile + Rate of greenup, Rate of senescence, and Integrated NDVI in greenup/integrated NDVI in senescence) for both methods. And among them, unsupervised k-means classification had the highest overall accuracy of 52% and Kappa coefficient of 0.2057. Both unsupervised (k-means) and supervised (minimum distance) methods achieved similar accuracies for the same metrics. The accuracy of IGBP-DIS released land cover map had an overall accuracy of 37% and a Kappa coefficient is 0.1441, and can improve to 46% by decomposing the crop/natural vegetation mosaic to cropland and other natural vegetation types. The results support using unsupervised k-means classification based on NDVI temporal profile metrics to provide an up-to-date vegetation cover classification. However, new effort is necessary in the future in order to improve the overall performance on this issue.  相似文献   

10.
Radar sensors can be used for large-scale vegetation mapping and monitoring using backscattering coefficients in different polarizations and wavelength bands. C-band space borne SAR is widely used for the classification of agricultural crops, but can only perform a limited discrimination of various tree species. This paper presents the results of discrimination between mustard crop and babul plantation (Prosopis sp.) using quad polarisation Radarsat 2 and ALOS PALSAR data. Study area is comprised of dense babul plantation along the canal, mustard crop on one side of the canal and Fallow land near to Ramgarh village of Jaisalmer district. Three bands of Radarsat (HH, HV and VV) acquired during peak mustard crop growth stage were integrated with four polarizations (HH, HV, VH and VV) of ALOS PALSAR acquired when crop cover was absent. Using only Radarsat data Jefferies-Matusita (JM) separability between mustard crop and babul plantation was found to be poor (710). Where as in the seven band combination the separability was observed to be high (1374). Among the different polarizations three layer combination, highest separability was observed using cross polarizations (HV and VH) of L-band with any one of the Radarsat Polarisation (HH/HV/VV). This combination of C- and L-band resulted in easy separation of mustard and babul plantation which was otherwise difficult using only Radarsat data.  相似文献   

11.
Detailed and enhanced land use land cover (LULC) feature extraction is possible by merging the information extracted from two different sensors of different capability. In this study different pixel level image fusion algorithms (PCA, Brovey, Multiplicative, Wavelet and combination of PCA & IHS) are used for integrating the derived information like texture, roughness, polarization from microwave data and high spectral information from hyperspectral data. Span image which is total intensity image generated from Advanced Land observing Satellite-Phase array L-band SAR (ALOS-PALSAR) quad polarization data and EO-1 Hyperion data (242 spectral bands) were used for fusion. Overall PCA fused images had shown better result than other fusion techniques used in this study. However, Brovey fusion method was found good for differentiating urban features. Classification using support vector machines was conducted for classifying Hyperion, ALOS PALSAR and fused images. It was observed that overall classification accuracy and kappa coefficient with PCA fused images was relatively better than other fusion techniques as it was able to discriminate various LULC features more clearly.  相似文献   

12.
The study examined the capability of dual-polarization SAR data for forest cover mapping and change assessment in the Brazilian Amazon Forest regions. Shuttle Imaging Radar (SIR)-C and Advanced Land Observing Satellite Phased Array L-band Synthetic Aperture Radar (ALOS PALSAR) data were analysed to map and quantify deforestation. The images were classified using hybrid classifier, where each land cover was grouped in various spectral sub-classes interpreted on the imagery and later merged together to generate the desired land cover classes. The classification accuracy for forest was reasonably high (>90%). The technique applied in this study can be extended for operational mapping and monitoring of deforestation in the tropics, particularly for those regions which are often covered by cloud.  相似文献   

13.
Abstract

Environmental data are often utilized to guide interpretation of spectral information based on context, however, these are also important in deriving vegetation maps themselves, especially where ecological information can be mapped spatially. A vegetation classification procedure is presented which combines a classification of spectral data from Landsat‐5 Thematic Mapper (TM) and environmental data based on topography and fire history. These data were combined utilizing fuzzy logic where assignment of each pixel to a single vegetation category was derived comparing the partial membership of each vegetation category within spectral and environmental classes. Partial membership was assigned from canopy cover for forest types measured from field sampling. Initial classification of spectral and ecological data produced map accuracies of less than 50% due to overlap between spectrally similar vegetation and limited spatial precision for predicting local vegetation types solely from the ecological information. Combination of environmental data through fuzzy logic increased overall mapping accuracy (70%) in coniferous forest communities of northwestern Montana, USA.  相似文献   

14.
The purpose of this study was to evaluate the relative classification accuracies of four land covers/uses in Kenya using spaceborne quad polarization radar from the Japanese ALOS PALSAR system and optical Landsat Thematic Mapper data. Supervised signature extraction and classification (maximum likelihood) was used to classify the different land covers/uses followed by an accuracy assessment. The original four band radar had an overall accuracy of 77%. Variance texture was the most useful of four measures examined and did improve overall accuracy to 80% and improved the producer’s accuracy for urban by almost 25% over the original radar. Landsat provided a higher overall classification accuracy (86%) as compared to radar. The merger of Landsat with the radar texture did not increase overall accuracy but did improve the producer’s accuracy for urban indicated some advantages for sensor integration.  相似文献   

15.
In this study, we investigated the performance of different fusion and classification techniques for land cover mapping in Hilir Perak, Peninsula Malaysia using RADAR and Landsat-8 images in a predominantly agricultural area. The fusion methods used are Brovey Transform, Wavelet Transform, Ehlers and Layer Stacking and their results classified into seven different land cover classes which include (1) pixel-based classifiers (spectral angle mapper (SAM), maximum likelihood (ML), support vector machine (SVM)) and (2) Object-based (rule-based and standard nearest neighbour (NN)) classifiers. The result shows that pixel-based classification achieved maximum accuracy of the optical data classification using SVM in Landsat-8 with 74.96% accuracy compared to SAM and ML. For multisource data classification, the highest overall accuracy recorded for layer stacking (SVM) was 79.78%, Ehlers fusion (SVM) with 45.57%, Brovey fusion (SVM) with 63.70% and Wavelet fusion (SVM) 61.16%. And for object-based classifiers, the overall classification accuracy is 95.35% for rule-based and 76.33% for NN classifier, respectively. Based on the analysis of their performances, object-based and the rule-based classifiers produced the best classification accuracy from the fused images.  相似文献   

16.
Reliable and up-to-date urban land cover information is valuable in urban planning and policy development. Due to the increasing demand for reliable land cover information there has been a growing need for robust methods and datasets to improve the classification accuracy from remotely sensed imagery. This study sought to assess the potential of the newly launched Landsat 8 sensor’s thermal bands and derived vegetation indices in improving land cover classification in a complex urban landscape using the support vector machine classifier. This study compared the individual and combined performance of Landsat 8’s reflective, thermal bands and vegetation indices in classifying urban land use-land cover. The integration of Landsat 8 reflective bands, derived vegetation indices and thermal bands overall produced significantly higher accuracy classification results than using traditional bands as standalone (i.e. overall, user and producer accuracies). An overall accuracy above 89.33% and a kappa index of 0.86, significantly higher than the one obtained with the use of the traditional reflective bands as a standalone data-set and other analysis stages. On average, the results also indicate high producer and user accuracies (i.e. above 80%) for most of the classes with a McNemar’s Z score of 9.00 at 95% confidence interval showing significant improvement compared with classification using reflective bands as standalone. Overall, the results of this study indicate that the integration of the Landsat 8’s OLI and TIR data presents an invaluable potential for accurate and robust land cover classification in a complex urban landscape, especially in areas where the availability of high resolution datasets remains a challenge.  相似文献   

17.
LANDSAT-TM has been evaluated for forest cover type and landuse classification in subtropical forests of Kumaon Himalaya (U.P.) Comparative evaluation of false colour composite generated by using various band combinations has been made. Digital image processing of Landsat-TM data on VIPS-32 RRSSC computer system has been carried out to stratify vegetation types. Conventional band combination in false colour composite is Bands 2, 3 and 4 in Red/Green/Blue sequence of Landsat TM for landuse classification. The present study however suggests that false colour combination using Landsat TM bands viz., 4, 5 and 3 in Red/Green/Blue sequence is the most suitable for visual interpretation of various forest cover types and landuse classes. It is felt that to extract full information from increased spatial and spectral resolution of Landsat TM, it is necessary to process the data digitally to classify land cover features like vegetation. Supervised classification using maximum likelihood algorithm has been attemped to stratify the forest vegetation. Only four bands are sufficient enough to classify vegetaton types. These bands are 2,3,4 and 5. The classification results were smoothed digitaly to increase the readiability of the map. Finally, the classification carred out using digital technique were evaluated using systematic sampling design. It is observed that forest cover type mapping can be achieved upto 80% overall mapping accuracy. Monospecies stand Chirpine can be mapped in two density classes viz., dense pine (<40%) with more than 90% accuracy. Poor accuracy (66%) was observed while mapping pine medium dense areas. The digital smoothening reduced the overall mapping accuracy. Conclusively, Landsat-TM can be used as operatonal sensor for forest cover type mapping even in complex landuse-terrain of Kumaon Himalaya (U.P.)  相似文献   

18.
多时相双极化合成孔径雷达干涉测量土地覆盖分类方法   总被引：5，自引：1，他引：4  
综合采用时相、极化和干涉3种维度的SAR数据进行土地覆盖分类。以黑龙江省逊克县多时相ALOS PALSAR数据覆盖区为研究区,利用不同时相极化SAR、干涉SAR信号对地物特征的敏感性,结合后向散射强度和干涉相干的时变特征进行地物解译,发展了基于多时相、多极化、干涉SAR数据的SVM土地覆盖分类方法。研究结果表明,引入双极化SAR中不同极化(HH-HV)间的相干系数,并结合所选择的时相特征、极化特征以及干涉相干特征进行分类,可解决双极化SAR影像中林地与城市及建设用地的混分问题,得到更高精度的土地覆盖分类结果。  相似文献   

19.
Landsat Thematic Mapper (TM) imagery and a digital elevation model (DEM) of the Kananaskis Valley in southwestern Alberta have been used to separate three forest types and eight landcover classes with mapping accuracies up to 76% overall. Image transformations based on a principal components analysis (PCA) were used to distinguish vegetation type and separate surface features in visual interpretations, and to reduce the 10 channel data set (TM 1–7, elevation, slope and incidence) to a more manageable 7 channel data set (PCA 1–4, elevation, slope and incidence). The DEM was shown to be critical in providing explanation of surface cover variability even though the original model was produced from medium scale aerial photography on a relatively coarse 100 metre grid. Discrimination increased up to 50% for pure stands of Lodgepole Pine (Pinus contorta Dougl.) and Englemann Spruce (Picea englemanii Parry) based on analysis of 100 pixels in test areas. Overall increases in map accuracy were between 2 and 11%. Success at this level of classification is required prior to detailed ecological study and modelling of mountain vegetation productivity at the community level using current satellite and aerial remote sensing technology.  相似文献   

20.
TerraSAR-X satellite acquires very high spatial resolution data with potential for detailed land cover mapping. A known problem with synthetic aperture radar (SAR) data is the lack of spectral information. Fusion of SAR and multispectral data provides opportunities for better image interpretation and information extraction. The aim of this study was to investigate the fusion between TerraSAR-X and Landsat ETM+ for protected area mapping using high pass filtering (HPF), principal component analysis with band substitution (PCA) and principal component with wavelet transform (WPCA). A total of thirteen land cover classes were identified for classification using a non-parametric C 4.5 decision tree classifier. Overall classification accuracies of 74.99%, 83.12% and 85.38% and kappa indices of 0.7220, 0.8100 and 0.8369 were obtained for HPF, PCA and WPCA fusion approaches respectively. These results indicate a high potential for a combined use of TerraSAR-X and Landsat ETM+ data for protected area mapping in Uganda.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号