共查询到20条相似文献，搜索用时 640 毫秒
1.
YU Jie YANG Haiquan TAN Ming ZHANG Guoning 《地球空间信息科学学报》2006,9(4):281-284
IntroductionThanks to a large number of applications ,suchas map updating, urban planning or land useanalysis ,extraction of artificial objects ,such asbuildings ,roads fromthei mages has been an ac-tive research field for many years . Since build-ings ar… 相似文献
2.
结合影像的LIDAR数据三维建筑物提取 总被引：4，自引：1，他引：3
随着LIDAR技术的出现,三维建筑物的提取也受到越来越多的重视。由于LIDAR数据分布的不连续性和不规律性,直接从机载激光扫描测距数据中进行建筑物提取较为困难。本文提出了一种结合灰度影像的LIDAR数据三维建筑物提取方法,分三个步骤:首先对灰度影像进行建筑物二维提取;然后将处理后影像和LIDAR数据粗匹配,初步确定LI-DAR数据中的三维建筑物区域;最后利用一组阈值操作进行三维建筑物的精确提取。实验结果表明该方法简单实用,适应性强。 相似文献
3.
This paper presents a new algorithm for building extraction from LIDAR (Light Detection and Ranging) point cloud data on the basis of a marked point process based building model. In this building model, the positions and geometries of buildings are modeled by a point process and its marks, respectively. The geometric marks for buildings include their length, width, direction, height. By Bayesian paradigm, a posterior distribution for the marked point process conditional on the LIDAR point cloud data is obtained. The Reversible Jump Markov Chain Monte Carlo (RJMCMC) based scheme is designed to simulate the posterior distribution. Finally, Maximum A Posteriori (MAP) strategy is used to obtain the optimal building detection. The proposed algorithm is tested by a set of LIDAR point cloud data. The results show its efficiency in complex residential environments. 相似文献
4.
Mohammad Awrangjeb Mehdi Ravanbakhsh Clive S. Fraser 《ISPRS Journal of Photogrammetry and Remote Sensing》2010,65(5):457-467
This paper presents an automatic building detection technique using LIDAR data and multispectral imagery. Two masks are obtained from the LIDAR data: a ‘primary building mask’ and a ‘secondary building mask’. The primary building mask indicates the void areas where the laser does not reach below a certain height threshold. The secondary building mask indicates the filled areas, from where the laser reflects, above the same threshold. Line segments are extracted from around the void areas in the primary building mask. Line segments around trees are removed using the normalized difference vegetation index derived from the orthorectified multispectral images. The initial building positions are obtained based on the remaining line segments. The complete buildings are detected from their initial positions using the two masks and multispectral images in the YIQ colour system. It is experimentally shown that the proposed technique can successfully detect urban residential buildings, when assessed in terms of 15 indices including completeness, correctness and quality. 相似文献
5.
给出了利用CityGML模型自动构建三维封闭建筑体的基本框架和流程。充分利用已有的CityGML数据,分析其与三维封闭建筑体的语义关联和差别,奠定利用CityGML构建三维封闭建筑体的理论基础;从构建三维封闭建筑体所需几何数据出发,根据语义关联从CityGML中提取相应的几何数据,构建符合三维封闭建筑体要求的几何对象,满足三维立体规划和审批、核查的空间数据需要,进而弥补传统地籍数据采集方式的不足。 相似文献
6.
利用机载LIDAR双次回波高程之差分类激光脚点 总被引：6，自引：5，他引：6
机载LIDAR技术已经引起了测绘界的浓厚兴趣,有可能给测绘领域带来一场新的技术革命。机载LI-DAR技术的硬件设备在国外已相对成熟,而机载LIDAR的数据后处理算法仍然处于研究发展阶段,还有诸多问题没有得到解决,其关键之一就是机载LIDAR数据的滤波与分类。本文首先对已有的滤波分类方法进行了综合评价,并指出了各自的局限。然后提出利用两次回波信号的高程数据来实现对机载LIDAR数据的分类。首次分类后得到植被激光脚点点集和地面及房屋激光脚点点集。而房屋上的激光脚点要高出地面上的激光脚点数米之多,简单利用阈值法就可以进一步分类出房屋激光脚点和地面激光脚点。也可以先经过滤波处理将地面激光脚点去掉,然后利用两次回波信号的高程数据来分类自然植被激光脚点和人工地物激光脚点。实验证明所提方法简单有效,算法简单实用,特别适用于分类植被激光脚点。 相似文献
7.
8.
9.
To visualize large urban models efficiently, this paper presents a framework for generalizing urban building footprints and facade textures by using multiple Gestalt rules and a graph-cut-based energy function. First, an urban scene is divided into different blocks by main road networks. In each block, the building footprints are partitioned into potential Gestalt groups. A footprint may satisfy several Gestalt principles. We employ the graph-cut-based optimization function to obtain a consistent segmentation of the buildings into optimal Gestalt groups with minimal energy. The building footprints in each Gestalt group are aggregated into different levels of detail (LODs). Building facade textures are also abstracted and simplified into multiple LODs using the same approach as the building footprint simplification. An effective data structure termed SceneTree is introduced to manage these aggregated building footprints and facade textures. Combined with the parallelization scheme, the rendering efficiency of large-scale urban buildings is improved. Compared with other methods, our presented method can efficiently visualize large urban models and maintain the city's image. 相似文献
10.
Thiele A. Cadario E. Schulz K. Soergel U. 《Geoscience and Remote Sensing Letters, IEEE》2010,7(1):83-87
11.
12.
13.
本文从空间-语义双重约束角度,提出一种顾及空间邻近和功能语义相似的建筑物空间分布模式识别方法。首先,基于建筑物的空间位置邻近性(即建筑物间的最小距离)约束进行聚类,获得建筑物的空间分布模式和建筑物间的空间邻近关系;然后,根据建筑物的功能语义相似性约束进行分割,获得建筑物的初步聚类结果;最后,考虑簇内相似性与簇间差异性进行整体优化,获得最终聚类结果。试验验证表明,本文方法比现有方法能够更有效地识别空间邻近与功能语义一致的建筑物群,服务于智慧城市建设中对建筑物进行语义层次综合和对城市结构进行深入研究的需求。 相似文献
14.
15.
Automatic 3D extraction of building roofs from remotely sensed data is important for many applications including city modelling. This paper proposes a new method for automatic 3D roof extraction through an effective integration of LIDAR (Light Detection And Ranging) data and multispectral orthoimagery. Using the ground height from a DEM (Digital Elevation Model), the raw LIDAR points are separated into two groups. The first group contains the ground points that are exploited to constitute a ‘ground mask’. The second group contains the non-ground points which are segmented using an innovative image line guided segmentation technique to extract the roof planes. The image lines are extracted from the grey-scale version of the orthoimage and then classified into several classes such as ‘ground’, ‘tree’, ‘roof edge’ and ‘roof ridge’ using the ground mask and colour and texture information from the orthoimagery. During segmentation of the non-ground LIDAR points, the lines from the latter two classes are used as baselines to locate the nearby LIDAR points of the neighbouring planes. For each plane a robust seed region is thereby defined using the nearby non-ground LIDAR points of a baseline and this region is iteratively grown to extract the complete roof plane. Finally, a newly proposed rule-based procedure is applied to remove planes constructed on trees. Experimental results show that the proposed method can successfully remove vegetation and so offers high extraction rates. 相似文献
16.
17.
With the advent of energy rating systems and increased energy efficiency requirements for built environment, the assessment of energy performance of new buildings and refurbishment rates of existing buildings have become an important compliance in the building design process. In order to analyse and simulate the effects of energy-efficient measures for buildings, it is essential to establish spatio-semantic information interoperability between the building design and energy modelling softwares. Data interoperability facilitates different domains to interact with the single building model. The geometrical properties of building semantics such as effective areas exposed to total incident radiation were used as indicators for assessment of seasonal solar potential of buildings. The key urban solar potential indicators were identified based on the semantic components of buildings. The CityGML instance document derived from a proposed energy application domain extension (ADE) conceptual schema could be used as common interoperable model for both the design and energy simulation systems. 相似文献
18.
Serkan Ural Ejaz Hussain Jie Shan 《International Journal of Applied Earth Observation and Geoinformation》2011
Geospatial distribution of population at a scale of individual buildings is needed for analysis of people's interaction with their local socio-economic and physical environments. High resolution aerial images are capable of capturing urban complexities and considered as a potential source for mapping urban features at this fine scale. This paper studies population mapping for individual buildings by using aerial imagery and other geographic data. Building footprints and heights are first determined from aerial images, digital terrain and surface models. City zoning maps allow the classification of the buildings as residential and non-residential. The use of additional ancillary geographic data further filters residential utility buildings out of the residential area and identifies houses and apartments. In the final step, census block population, which is publicly available from the U.S. Census, is disaggregated and mapped to individual residential buildings. This paper proposes a modified building population mapping model that takes into account the effects of different types of residential buildings. Detailed steps are described that lead to the identification of residential buildings from imagery and other GIS data layers. Estimated building populations are evaluated per census block with reference to the known census records. This paper presents and evaluates the results of building population mapping in areas of West Lafayette, Lafayette, and Wea Township, all in the state of Indiana, USA. 相似文献
19.
LIDAR Data Filtering and DTM Interpolation Within GRASS 总被引：5，自引：0，他引：5
LIDAR (Light Detection and Ranging) is one of the most recent technologies in surveying and mapping. LIDAR is based on the combination of three different data collection tools: a laser scanner mounted on an aircraft, a Global Positioning System (GPS) used in phase differential kinematic modality to provide the sensor position and an Inertial Navigation System (INS) to provide the orientation. The laser sends towards the ground an infrared signal, which is reflected back to the sensor. The time employed by the signal, given the aircraft position and attitude, allows computation of the earth point elevation. In standard conditions, taking into account the flight (speed 200–250 km/hour, altitude 500–2,000 m) and sensor characteristics (scan angle ± 10–20 degrees, emission rate 2,000–50,000 pulses per second), earth elevations are collected within a density of one point every 0.5–3 m. The technology allows us therefore to obtain very accurate (5–20 cm) and high resolution Digital Surface Models (DSM). For many applications, the Digital Terrain Model (DTM) is needed: we have to automatically detect and discard from the previous DSM all the features (buildings, trees, etc.) present on the terrain. This paper describes a procedure that has been implemented within GRASS to construct DTMs from LIDAR source data. 相似文献
20.
建筑物是城市的重要标志之一,综合利用LiDAR数据和高分辨率遥感影像可以充分发挥不同数据源中提取建筑物的优势。本文基于面向对象分类理论,利用机载LiDAR数据和GeoEye高空间分辨率遥感影像,在多尺度分割的基础上对实验区分类并提取建筑物,进而对提取结果进行精度评价。实验表明,将LiDAR数据与高分辨率影像数据结合能够很好地提取建筑物,建筑物提取精度达89.28%。 相似文献